There is a new eDPU revision that uses Marvell 88E6361 switch onboard.
We can rely on detecting the switch to enable and fixup the Linux DTS
so a single DTS can be used.
There is currently no support for the 88E6361 switch and thus no working
networking in U-Boot, so we disable both ports.
Signed-off-by: Robert Marko <robert.marko@sartura.hr>
Reviewed-by: Stefan Roese <sr@denx.de>
Currently, Esspresobin switch is being setup directly in last_stage_init()
which makes it hard to add support for any other board to be setup.
So, lets just move the switch setup code to a separate function and call it
if compatible matches, there should be no functional change.
Signed-off-by: Robert Marko <robert.marko@sartura.hr>
Reviewed-by: Stefan Roese <sr@denx.de>
Currently, Esspresobin FDT is being fixed up directly in ft_board_setup()
which makes it hard to add support for any other board to be fixed up.
So, lets just move the FDT fixup code to a separate function and call it
if compatible matches, there should be no functional change.
Signed-off-by: Robert Marko <robert.marko@sartura.hr>
Reviewed-by: Stefan Roese <sr@denx.de>
The ATF implementation for AC5/AC5X ends up with bl31 living in some
internal SRAM. This is in the middle of the large MMIO region that we
were using. Adjust this to be finer grained blocks based on the address
map from the AC5X Family Control and Management Subsystem Functional
Datasheet.
Signed-off-by: Chris Packham <judge.packham@gmail.com>
Each partition may belong to an image, which has a name. That name can
be useful for debugging as it helps identify where the partition came
from.
Signed-off-by: Brandon Maier <brandon.maier@collins.com>
Link: https://lore.kernel.org/r/20240104185258.39465-4-brandon.maier@collins.com
Signed-off-by: Michal Simek <michal.simek@amd.com>
Extract partitions from a Xilinx Boot Image using dumpimage.
Add helper for_each_zynqmp_part() to reuse the partition walking code
between the printing and extracting functions.
Signed-off-by: Brandon Maier <brandon.maier@collins.com>
Link: https://lore.kernel.org/r/20240104185258.39465-3-brandon.maier@collins.com
Signed-off-by: Michal Simek <michal.simek@amd.com>
Two of the partition size fields are not printed. Currently only the
"total" size is displayed, which is the size of the image data
(encrypted), padding, expansion, and authentication data. Add the
"unencrypted data" size, which is the original size of the data before
being encrypted. And "encrypted data" size, which is just the encrypted
data.
To avoid printing useless information, only print the encrypted and
unencrypted sizes if they are different from the total.
Signed-off-by: Brandon Maier <brandon.maier@collins.com>
Link: https://lore.kernel.org/r/20240104185258.39465-2-brandon.maier@collins.com
Signed-off-by: Michal Simek <michal.simek@amd.com>
The zynqmpimage_print_header() skips printing the first partition. This
is because the image header can contain duplicate fields as the first
partition. However some fields, like the partition attributes, are only
present in the partition table. It is also possible for the first
partition to not be declared in the image header, if the image is not a
bootloader image.
Signed-off-by: Brandon Maier <brandon.maier@collins.com>
Link: https://lore.kernel.org/r/20240104185258.39465-1-brandon.maier@collins.com
Signed-off-by: Michal Simek <michal.simek@amd.com>
zynqmp-power node is going to be renamed to power-management which should
be generic enough. New name came from dt-binding review that's why there is
no way around. Add support new name but also at the same time check old
name just in case older dt binding is used.
Signed-off-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/967aa76f9f72604c874b580476aa85f5260ccd65.1704448544.git.michal.simek@amd.com
* make table_compute_checksum() arguments const
* remove duplicate function verify_checksum()
* enable setting processor family > 0xff
* set correct SMBIOS processor family value for RISC-V
* avoid importing ofnode.h in smbios.h
* provide a UEFI tool to dump SMBIOS table
-----BEGIN PGP SIGNATURE-----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=oHtG
-----END PGP SIGNATURE-----
Merge tag 'smbios-2024-04-rc1' of https://source.denx.de/u-boot/custodians/u-boot-efi
Pull request smbios-2024-04-rc1
* make table_compute_checksum() arguments const
* remove duplicate function verify_checksum()
* enable setting processor family > 0xff
* set correct SMBIOS processor family value for RISC-V
* avoid importing ofnode.h in smbios.h
* provide a UEFI tool to dump SMBIOS table
Use counterpart dev_read_* functions instead of fdt* ones. It fixes
checkpatch warnings like this:
WARNING: Use the livetree API (dev_read_...)
#54: FILE: drivers/pinctrl/exynos/pinctrl-exynos.c:137:
pinvals[idx] = fdtdec_get_int(fdt, node,
and also makes it possible to avoid using the global data pointer in the
driver.
No functional change.
Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
Pull some variables declared in exynos_pinctrl_set_state() into its
loop, to reduce their scope. Style commit, no functional change.
Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
All pin related dt properties (pin-function, pin-pud and pin-drv) are
handled in a very similar way. Get rid of that code duplication by
extracting the corresponding data knowledge into an actual data
structure (array), and then just iterating over it.
No functional change, it's a refactoring commit.
Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
Get rid of hard-coded register offsets and widths. Instead provide a way
for pinctrl drivers to specify different pin bank register offsets and
widths. This in turn makes it possible to add support for new SoCs that
have registers with offset/width values different than generic ones
already available in pinctrl-exynos driver.
Offset constants (now unused in pinctrl-exynos.c) are moved to
pinctrl-exynos7420 driver, which is the single user of those constants.
The design of this patch follows Linux kernel pinctrl-exynos driver
design, in terms of added data structures and types. This patch doesn't
add support for any new SoCs and shouldn't introduce any functional
changes.
Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
Rework pin_to_bank_base() function to obtain bank data structure by bank
name instead of getting bank base address by pin name, and rename it to
get_bank() to reflect this change. This in turn leads to the extraction
of parse_pin(), so the caller has to use it before calling get_bank().
No functional change. This is a refactoring commit which prepares
pinctrl driver code for handling different sizes of register fields,
which will be added next.
Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
Next commits are going to re-design the pin_to_bank_base() function and
its usage in a way that the pin parsing code will be called separately.
Extract it into a separate function first, as a refactoring commit.
No functional change.
Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
The dollar test was merged with bugous console behavior, and
instead of fixing it, this behavior was just workarounded.
It seems like without the fix the ut_assert_skipline(); didn't clear
console and running ut_assert_skipline(); many times would give always
OK. With
lib: membuff: fix readline not returning line in case of overflow
the line is cleared correctly and next assert fails because now there
is nothing to clean which is correct if we look the this a bit above
the failing assert:
if (gd->flags & GD_FLG_HUSH_MODERN_PARSER) {
/*
* For some strange reasons, the console is not empty after
* running above command.
* So, we reset it to not have side effects for other tests.
*/
console_record_reset_enable();
} else if (gd->flags & GD_FLG_HUSH_OLD_PARSER) {
ut_assert_console_end();
}
Which further confirms that tests workaround the old problem and now
that problem is fixed we can remove the whole if blocks and simply
place ut_assert_console_end() right after ut_assert_skipline() without
any conditional and will pass green.
So this part of code goes from:
ut_assert_skipline();
ut_assert_skipline();
if (gd->flags & GD_FLG_HUSH_MODERN_PARSER) {
/* See above comments. */
console_record_reset_enable();
} else if (gd->flags & GD_FLG_HUSH_OLD_PARSER) {
ut_assert_console_end();
}
to become:
ut_assert_skipline();
ut_assert_console_end();
Same thing should be done with the if block mentioned above that calls
console_record_reset_enable().
Signed-off-by: Ion Agorria <ion@agorria.com>
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Tested-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
Link: https://lore.kernel.org/r/20240105072212.6615-8-clamor95@gmail.com
[mkorpershoek: reworded commit title]
Signed-off-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
QEMU does not provide information in the device-tree if the ARMv8.5 RNDR
or the RISC-V Zkr RNG have been enabled on the command line.
In different parts of our code we assume that the first RNG device is the
one to be used. Therefore it is preferable to detect the availability of
said devices already in the bind method.
There has been a related discussion if the U_BOOT_DRVINFO() macro should be
used for architectural devices
(https://lore.kernel.org/u-boot/20231031125552.26698-1-heinrich.schuchardt@canonical.com/).
This aspect is not touched by this series.
-----BEGIN PGP SIGNATURE-----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=5m7m
-----END PGP SIGNATURE-----
Merge tag 'rng-2024-04-rc1' of https://gitlab.denx.de/u-boot/custodians/u-boot-efi
Pull request rng-2024-04-rc1
QEMU does not provide information in the device-tree if the ARMv8.5 RNDR
or the RISC-V Zkr RNG have been enabled on the command line.
In different parts of our code we assume that the first RNG device is the
one to be used. Therefore it is preferable to detect the availability of
said devices already in the bind method.
There has been a related discussion if the U_BOOT_DRVINFO() macro should be
used for architectural devices
(https://lore.kernel.org/u-boot/20231031125552.26698-1-heinrich.schuchardt@canonical.com/).
This aspect is not touched by this series.
If line overflows readline it will not be returned, fix this behavior,
make it optional and documented properly.
Signed-off-by: Ion Agorria <ion@agorria.com>
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Link: https://lore.kernel.org/r/20240105072212.6615-6-clamor95@gmail.com
Signed-off-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
Set flag to enable console record on console_record_init
and not only on console_record_reset_enable. This fixes
missing start of U-Boot log for fastboot oem console
command.
Signed-off-by: Ion Agorria <ion@agorria.com>
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
Link: https://lore.kernel.org/r/20240105072212.6615-5-clamor95@gmail.com
Signed-off-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
Currently u-boot fastboot can only send one message back to host,
so if there is a need to print more than one line messages must be
kept sending until all the required data is obtained. This behavior
can be adjusted using multiresponce ability (getting multiple lines
of response) proposed in this patch.
Signed-off-by: Ion Agorria <ion@agorria.com>
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
Link: https://lore.kernel.org/r/20240105072212.6615-2-clamor95@gmail.com
Signed-off-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
Enabled the default utilization of the NFS command across all Xilinx
platforms to facilitate the booting of images through the network
using the NFS protocol.
Fixes: 10de125707 ("disable NFS support by default")
Signed-off-by: Tejas Bhumkar <tejas.arvind.bhumkar@amd.com>
Link: https://lore.kernel.org/r/20240104045217.2966454-1-tejas.arvind.bhumkar@amd.com
Signed-off-by: Michal Simek <michal.simek@amd.com>
i2c1 is having all chips on it that's why use it instead of 0.
You can see this error when you boot system.
eth0: ethernet@ff0c0000
Setting bus to 0
Failure changing bus number (-19)
Enable permission for node ID 33
Enable permission for node ID 47
Hit any key to stop autoboot: 0
It also get USB to work.
Fixes: dd4a822016 ("arm64: zynqmp: Introduce kria SOM defconfig")
Signed-off-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/cf07682a611de9895271d629ee00fb2809d99d0e.1702904913.git.michal.simek@amd.com
An EFI binary smbiosdump.efi is provided that can be used to check the
SMBIOS table for consistency and to dump it as a file.
The tool provides the following commands:
check
Check the SMBIOS table for consistency.
exit
Leave the tool.
help
Show available commands.
save
Save the SMBIOS table to a file on the EFI system partition. The file
can be further analyzed with the dmidecode command line tool::
dmidecode --from-dump <filename>
Specifying 'nocolor' as load option data suppresses colored output and
clearing of the screen.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Acked-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
The smbios.h include does not use any definitions from ofnode.h.
So don't include it.
As DECLARE_GLOBAL_DATA_PTR is no longer defined via dm/of.h we need to
add it to efi_smbios.c.
Add now missing includes to smbios-parser.c.
Remove a superfluous check comparing the sizes of the SMBIOS 2.1 and SMBIOS
3.0 anchors.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
The SMBIOS specification requires to set the processor family in the type 4
(Processor Information) table to specific values depending only on the
bitness of the system (0x200 for RV32 and 0x201 for RV64).
With this patch dmidecode shows
Handle 0x0004, DMI type 4, 48 bytes
Processor Information
Socket Designation: Not Specified
Type: Central Processor
Family: RV64
for qemu-riscv64_smode_defconfig.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Many value of processor type exceed 0xff and have to be stored as u16
value. In the type 4 table set processor_family = 0xfe signaling that
field processor_family2 is used and write the actual value into the
processor_family2 field.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
The function verify_checksum() duplicates what table_compute_checksum()
does. Replace it. table_compute_checksum() is always compiled.
Fixes: 415eab0655 ("smbios: add parsing API")
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
table_compute_checksum() does neither changes the content of the
checksummed buffer nor the buffer length. Adding const to the
definition makes the function wider usable.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
The existence of devices should be checked in the bind method and not in
the probe method. Adjust the RISC-V Zkr RNG driver accordingly.
Use ENOENT (and not ENODEV) to signal that the device is not available.
Fixes: ceec977ba1 ("rng: Provide a RNG based on the RISC-V Zkr ISA extension")
Reported-by: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
In different parts of our code we assume that the first RNG device is the
one to be used. Therefore it is preferable to detect the availability of
the RNDR register already in the bind method.
For signaling the non-existence of a device the driver model requires using
ENOENT (and not ENODEV).
Fixes: 31565bb0aa ("driver: rng: Add DM_RNG interface for ARMv8.5 RNDR registers")
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Tested-by: Andre Przywara <andre.przywara@arm.com>
