Commit graph

710 commits

Author SHA1 Message Date
Alexander Graf
601147b06a serial: bcm283x_mu: Detect disabled serial device
On the raspberry pi, you can disable the serial port to gain dynamic frequency
scaling which can get handy at times.

However, in such a configuration the serial controller gets its rx queue filled
up with zero bytes which then happily get transmitted on to whoever calls
getc() today.

This patch adds detection logic for that case by checking whether the RX pin is
mapped to GPIO15 and disables the mini uart if it is not mapped properly.

That way we can leave the driver enabled in the tree and can determine during
runtime whether serial is usable or not, having a single binary that allows for
uart and non-uart operation.

Signed-off-by: Alexander Graf <agraf@suse.de>
Acked-by: Stephen Warren <swarren@wwwdotorg.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
2016-09-06 13:18:19 -04:00
Masahiro Yamada
85dc2fe119 ARM: uniphier: change UNIPHIER_SERIAL to default y option
This is very likely to be necessary for normal use cases.
Set its default to 'y' for shorter defconfig files.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2016-08-28 13:11:35 +09:00
Tom Rini
c98b171e10 Merge branch 'rmobile' of git://git.denx.de/u-boot-sh
[trini: Drop CMD_BOOTI as it's now on by default on ARM64]
Signed-off-by: Tom Rini <trini@konsulko.com>
2016-08-20 16:40:34 -04:00
masakazu.mochizuki.wd@hitachi.com
6f107e4cf6 arm: rmobile: Add BLANCHE board support
BLANCHE is development board based on R-Car V2H SoC (R8A7792)

This commit supports the following periherals:
- SCIF, Ethernet, QSPI, MMC

Signed-off-by: Masakazu Mochizuki <masakazu.mochizuki.wd@hitachi.com>
Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2016-08-17 10:25:35 +09:00
Hiroyuki Yokoyama
d6ee8ce51d serial: sh: Add support R8A7795
This can be used in the same way as other R-CAR serial setting.

Signed-off-by: Hiroyuki Yokoyama <hiroyuki.yokoyama.vx@renesas.com>
Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2016-08-17 10:25:34 +09:00
Tom Rini
4711e7f7af Merge branch 'master' of git://www.denx.de/git/u-boot-imx 2016-07-28 08:45:00 -04:00
Masahiro Yamada
4e3d84066e ARM: uniphier: use (devm_)ioremap() instead of map_sysmem()
This does not have much impact on behavior, but makes code look more
more like Linux.  The use of devm_ioremap() often helps to delete
.remove callbacks entirely.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2016-07-24 00:13:10 +09:00
Michal Simek
59da82ef82 serial: zynq: Read information about clock from DT
Read information about clock frequency from DT.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Moritz Fischer <moritz.fischer@ettus.com>
2016-07-22 14:04:40 +02:00
Tom Rini
45031f1a1e Merge branch 'master' of git://git.denx.de/u-boot-sh 2016-07-21 10:40:35 -04:00
Breno Lima
5d219d46aa serial_mxc: Remove unconditional DCE setting
Commit 83fd908f28 ("dm: imx: serial: Support DTE mode when using driver
model") breaks the serial output for the imx boards that do not use
the serial driver model.

The reason for the breakage is that it's setting UFCR_DCEDTE
unconditionally for the non-dm case.

So keep the original behavior by removing UFCR_DCEDTE setting in the
non-dm case.

Tested on mx7sabresd and mx6wandboard.

Signed-off-by: Breno Lima <breno.lima@nxp.com>
Acked-by: Stefan Agner <stefan.agner@toradex.com>
Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
2016-07-21 10:43:52 +02:00
Stefan Agner
83fd908f28 dm: imx: serial: Support DTE mode when using driver model
The MXC UART IP can be run in DTE or DCE mode. This depends on the
board wiring and the pinmux used and hence is board specific. This
extends platform data with a new field to choose wheather DTE
mode shall be used.

Signed-off-by: Stefan Agner <stefan.agner@toradex.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2016-07-19 19:52:13 +02:00
Tom Rini
ebe621d5fb Merge git://git.denx.de/u-boot-dm 2016-07-15 08:06:22 -04:00
Simon Glass
2fc24d5335 rockchip: serial: Add an of-platdata driver for rockchip
Add a driver that works with of-platdata. It sets up the platform data and
calls the standard ns16550 driver.

Signed-off-by: Simon Glass <sjg@chromium.org>
2016-07-14 20:40:24 -06:00
Simon Glass
b2927fbaa8 dm: serial: ns16550: Update to support of-platdata
With of-platdata this driver cannot know the format of the of-platdata
struct, so we cannot use generic code for accessing the of-platdata. Each
SoC that uses this driver will need to set up ns16550's platdata for it.
So don't compile in the generic code.

Signed-off-by: Simon Glass <sjg@chromium.org>
2016-07-14 20:40:24 -06:00
Simon Glass
b484b0daef dm: serial: Add support for of-platdata
When this feature is enabled, we cannot access the device tree to find out
which serial device to use. Just use the first serial driver we find.

Signed-off-by: Simon Glass <sjg@chromium.org>
2016-07-14 20:40:24 -06:00
Simon Glass
0110f509c8 sandbox: serial: Don't sync video in SPL
SPL does not support an LCD display so there is no need to sync the video
when there is serial output.

Signed-off-by: Simon Glass <sjg@chromium.org>
2016-07-14 20:40:24 -06:00
Toshifumi NISHINAGA
ba0a3c16e0 stm32: clk: Add 200MHz clock configuration for stm32f746 discovery board
This patch adds 200MHz clock configuration for stm32f746 discovery board.
This patch is based on STM32F4 and emcraft's[1].

[1]:  https://github.com/EmcraftSystems/u-boot

Signed-off-by: Toshifumi NISHINAGA <tnishinaga.dev@gmail.com>
2016-07-14 18:22:41 -04:00
Yoshinori Sato
747431b9d5 serial_sh: Add standrad SCI (w/o FIFO) support
Add support for standard type SCI (without FIFO) port.

Signed-off-by: Yoshinori Sato <ysato@users.sourceforge.jp>
Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2016-07-09 05:51:57 +09:00
Yoshinori Sato
359787cfe4 serial_sh: Device Tree support
Add Device Tree bindings.

Signed-off-by: Yoshinori Sato <ysato@users.sourceforge.jp>
Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2016-07-09 05:51:57 +09:00
Stephen Warren
135aa95002 clk: convert API to match reset/mailbox style
The following changes are made to the clock API:
* The concept of "clocks" and "peripheral clocks" are unified; each clock
  provider now implements a single set of clocks. This provides a simpler
  conceptual interface to clients, and better aligns with device tree
  clock bindings.
* Clocks are now identified with a single "struct clk", rather than
  requiring clients to store the clock provider device and clock identity
  values separately. For simple clock consumers, this isolates clients
  from internal details of the clock API.
* clk.h is split so it only contains the client/consumer API, whereas
  clk-uclass.h contains the provider API. This aligns with the recently
  added reset and mailbox APIs.
* clk_ops .of_xlate(), .request(), and .free() are added so providers
  can customize these operations if needed. This also aligns with the
  recently added reset and mailbox APIs.
* clk_disable() is added.
* All users of the current clock APIs are updated.
* Sandbox clock tests are updated to exercise clock lookup via DT, and
  clock enable/disable.
* rkclk_get_clk() is removed and replaced with standard APIs.

Buildman shows no clock-related errors for any board for which buildman
can download a toolchain.

test/py passes for sandbox (which invokes the dm clk test amongst
others).

Signed-off-by: Stephen Warren <swarren@nvidia.com>
Acked-by: Simon Glass <sjg@chromium.org>
2016-06-19 17:05:55 -06:00
Stoica Cosmin-Stefan
1f68dbc881 serial: Introduce linflex uart support
The Linflex module is integrated on some NXP automotive SoCs part of the former
Freescale portfolio, like S32V234, an SoC for Advanced Driver Assistance
Systems.

Original-signed-off-by: Stoica Cosmin-Stefan <cosminstefan.stoica@freescale.com>
Original-signed-off-by: Chircu Bogdan <Bogdan.Chircu@freescale.com>
Original-signed-off-by: Depons Eric <eric.depons@freescale.com>
Original-signed-off-by: Eddy Petrișor <eddy.petrisor@gmail.com>

Signed-off-by: Eddy Petrișor <eddy.petrisor@gmail.com>
2016-06-13 08:56:02 -04:00
Wenyou Yang
c1631c8a04 serial: atmel_usart: Add device tree support
Add device tree support.

Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com>
Reviewed-by: Andreas Bießmann <andreas@biessmann.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
2016-06-12 23:49:38 +02:00
Tom Rini
d77fa2ff76 Merge http://git.denx.de/u-boot-samsung
Signed-off-by: Tom Rini <trini@konsulko.com>

Conflicts:
	configs/peach-pi_defconfig
	configs/peach-pit_defconfig
2016-06-06 13:39:43 -04:00
Marek Vasut
03c6f1761e serial: 16550: Drop OMAP1510 support
The CONFIG_OMAP1510 is no longer defined, so remove this dead code.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Tom Rini <trini@konsulko.com>
Cc: Simon Glass <sjg@chromium.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
Acked-by: Nishanth Menon <nm@ti.com>
2016-06-02 21:21:41 -04:00
Marek Vasut
fa4ce72316 serial: 16550: Make serial_io/out_shift available to debug mode
The ns16550 driver needs serial_in_shift() and serial_out_shift()
when compiled in debug UART mode, so shift the DM_SERIAL check a
little to make these functions available.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Tom Rini <trini@konsulko.com>
Cc: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2016-06-02 21:21:41 -04:00
Beniamino Galvani
bfcef28ae4 arm: add initial support for Amlogic Meson and ODROID-C2
This adds platform code for the Amlogic Meson GXBaby (S905) SoC and a
board definition for ODROID-C2. This initial submission only supports
UART and Ethernet (through the existing Designware driver). DTS files
are the ones submitted to Linux arm-soc for 4.7 [1].

[1] https://patchwork.ozlabs.org/patch/603583/

Signed-off-by: Beniamino Galvani <b.galvani@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2016-05-27 15:39:47 -04:00
Paul Burton
df8ec55d52 dm: ns16550: Don't map_physmem for I/O ports
If the UART is to be accessed using I/O port accessors (inb & outb) then
using map_physmem doesn't make sense, since it operates in a different
memory space. Remove the call to map_physmem when
CONFIG_SYS_NS16550_PORT_MAPPED is defined, allowing I/O port addresses
to not be mangled by the incorrect mapping.

Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2016-05-26 01:34:13 +02:00
Thomas Abraham
cf75cdf96e serial: s5p: use clock api to get clock rate
On Exynos platforms that support clock driver API, allow the driver to
use clock api get the SCLK clock rate.

Cc: Minkyu Kang <mk7.kang@samsung.com>
Signed-off-by: Thomas Abraham <thomas.ab@samsung.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2016-05-25 10:00:19 +09:00
Thomas Abraham
5ab6c4df27 serial: s5p: get the port id number from the alias of the device node
The port id, if not specified in the device node, can be obtained from
the alias of the device node listed in the aliases node.

Cc: Minkyu Kang <mk7.kang@samsung.com>
Signed-off-by: Thomas Abraham <thomas.ab@samsung.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2016-05-25 10:00:19 +09:00
Wills Wang
773f3b2538 ar933x: serial: Remove the explicit pinctrl setting
The correct pinctrl is handled automatically so we don't need to do it in
the driver.

Signed-off-by: Wills Wang <wills.wang@live.com>
2016-05-21 01:36:38 +02:00
Wills Wang
60b49761e9 drivers: serial: add serial driver for ar933x SOC
This patch add support for ar933x serial.

Signed-off-by: Wills Wang <wills.wang@live.com>
Reviewed-by: Thomas Chou <thomas@wytron.com.tw>
Reviewed-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2016-05-21 01:25:50 +02:00
angelo@sysam.it
e27802af54 m68k: add DM model serial driver
Boards can now use DM serial driver, or still legacy mcf uart
driver version.

Signed-off-by: Angelo Dureghello <angelo@sysam.it>
Acked-by: Simon Glass <sjg@chromium.org>
2016-05-17 09:54:43 -06:00
Stephen Warren
e3a46e3ee2 serial: bcm283x_mu: make pending values more explicit
dm_serial_ops.pending should return the number of characters, not just a
valid C Boolean integer value. The existing code does already does this,
but only as an accident since BCM283X_MU_LSR_RX_READY happens to be
BIT(0). Enhance the code to be more explicit about the values it returns.

Suggested-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Stephen Warren <swarren@wwwdotorg.org>
2016-04-18 17:11:47 -04:00
Alexey Brodkin
8b15010b1f arc: get rid of running_on_hw
ISS is obsolete now and nSIM is used for simulation instead.
In its turn nSIM properly handles baud-rate settings so get rid
of now useless check.

Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
2016-04-11 10:20:30 -07:00
Mateusz Kulikowski
142a20c367 serial: Add support for Qualcomm serial port
This driver works in "new" Data Mover UART mode, so
will be compatible with modern Qualcomm chips only.

Signed-off-by: Mateusz Kulikowski <mateusz.kulikowski@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Tested-by: Simon Glass <sjg@chromium.org>
2016-04-01 17:18:07 -04:00
Masahiro Yamada
b37a1ccea2 serial: uniphier: use devm_get_addr() to get base address
Currently, fdtdec_get_addr_size() does not support the address
translation, so it cannot handle device trees with non-straight
"ranges" properties.  (This would be a problem with DTS for UniPhier
ARMv8 SoCs.)

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2016-04-01 00:17:07 +09:00
Stephen Warren
3917c26909 serial: add BCM283x mini UART driver
The RPi3 typically uses the regular UART for high-speed communication with
the Bluetooth device, leaving us the mini UART to use for the serial
console. Add support for this UART so we can use it.

Signed-off-by: Stephen Warren <swarren@wwwdotorg.org>
2016-03-27 09:12:52 -04:00
Masahiro Yamada
d5cf32977f ARM: uniphier: support Debug UART
For ARM32 architecture, CONFIG_DEBUG_LL is available for early
low-level debugging (and actually UniPhier 32bit SoCs use it), but
ARM64 architecture does not support it.  Instead, CONFIG_DEBUG_UART
is available as an architecture-independent debug facility.

This commit supports it on all the UniPhier SoCs (including the new
ARMv8 SoCs), which is very useful for new SoC bringups.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2016-03-24 01:45:41 +09:00
Eric Anholt
cd0fa5bff8 serial: pl01x: Add support for devices with the rate pre-configured.
For Raspberry Pi, we had the input clock rate to the pl011 fixed in
the rpi.c file, but it may be changed by firmware due to user changes
to config.txt.  Since the firmware always sets up the uart (default
115200 output unless the user changes it), we can just skip our own
uart init to simplify the boot process and more reliably get serial
output.

Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Tom Rini <trini@konsulko.com>
Tested-by: Stephen Warren <swarren@wwwdotorg.org>
2016-03-22 12:16:12 -04:00
Michal Simek
59b35ddd26 dm: ns16550: Add support for reg-offset property
reg-offset is the part of standard 8250 binding in the kernel.
It is shifting start of address space by reg-offset.
On Xilinx platform this offset is typically 0x1000.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
Moved the new field to the end of the struct to avoid problems:
Signed-off-by: Simon Glass <sjg@chromium.org>
2016-03-17 21:27:39 -06:00
Simon Glass
e4d6ab0c2c x86: Allow use of serial soon after relocation
At present on x86 machines with use cache-as-RAM, the memory goes away just
before board_init_r() is called. This means that serial drivers are
no-longer unavailable, until initr_dm() it called, etc.

Any attempt to use printf() within this period will cause a hang.

To fix this, mark the serial devices as 'unavailable' when it is no-longer
available. Bring it back when serial_initialize() is called. This means that
the debug UART will be used instead for this period.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2016-03-17 10:27:24 +08:00
Alison Wang
ab761ce9f9 dm: serial: Remove duplicated carriage return character
As the handling for carriage return and line feed is done in the common
DM driver serial-uclass.c, such handling in some serial DM drivers is
duplicated and need to be removed.

Signed-off-by: Alison Wang <alison.wang@nxp.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2016-03-14 15:34:50 -06:00
Alison Wang
055457ef25 serial: Move carriage return before line feed for some serial drivers
In general, a carriage return needs to execute before a line feed.
The patch is to change some serial drivers based on this rule, such
as serial_mxc.c, serial_pxa.c, serial_s3c24x0.c and usbtty.c.

Signed-off-by: Alison Wang <alison.wang@nxp.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2016-03-14 15:34:50 -06:00
Alison Wang
c5917b4b05 dm: serial-uclass: Move a carriage return before a line feed
In general, a carriage return needs to execute before a line feed. The
patch is to change serial DM driver serial-uclass.c based on this rule.

Signed-off-by: Alison Wang <alison.wang@nxp.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2016-03-14 15:34:50 -06:00
Tom Rini
e5e88c6596 Revert "dm: ns16550: Add support for reg-offset property"
This reverts commit d9a3bec682.

While this is a correct change to do long term it unfortunately breaks a
number of platforms that are using pdata and not named struct members so
they are getting all of their data after 'base' incorrect.

Acked-by: Michal Simek <michal.simek@xilinx.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
2016-02-29 10:26:20 -05:00
Michal Simek
966bfa7347 serial: dcc: Move driver to DM
Enabling this driver requires some DT changes.
Adding DCC to root or main bus:
dcc: dcc {
	compatible = "arm,dcc";
	u-boot,dm-pre-reloc;
};

Extend alias list to link DCC:
	serial0 = &uart0;
	serial1 = &uart1;
	serial2 = &dcc;

Change stdout-path to point to dcc port.
	stdout-path = "serial2:115200n8";

Also add support for debug uart to help with early debug.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2016-02-25 19:06:37 -05:00
Vikas Manocha
6a12cebd90 stm32x7: add support for stm32x7 serial driver
This patch adds support for stm32f7 family usart peripheral.

Signed-off-by: Vikas Manocha <vikas.manocha@st.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2016-02-24 18:43:54 -05:00
Michal Simek
d9a3bec682 dm: ns16550: Add support for reg-offset property
reg-offset is the part of standard 8250 binding in the kernel.
It is shifting start of address space by reg-offset.
On Xilinx platform this offset is typically 0x1000.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
2016-02-22 16:21:10 +01:00
Michal Simek
6cd0f2a6cd serial: zynq: Change logic in putc
Sync logic with Linux kernel where TX empty flag is checked before char
is sent.
This logic is fixing problem with console on zynqmp platform.

For example:
DRAM:  2 GiB
Enabling Caches...
EL Level:	��   sdhci@ff170000: 0
Using default environment

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Moritz Fischer <moritz.fischer@ettus.com>
2016-02-22 16:21:04 +01:00
David Müller (ELSOFT AG)
470250e8e6 s3c24xx: serial: Remove dead code
Signed-off-by: David Müller <d.mueller@elsoft.ch>
2016-02-08 10:24:18 -05:00
David Müller (ELSOFT AG)
5a6f68d496 Remove unused CONFIG_HWFLOW option and associated dead code.
Signed-off-by: David Müller <d.mueller@elsoft.ch>
2016-02-08 10:24:17 -05:00
David Müller (ELSOFT AG)
928f605455 Remove unused CONFIG_MODEM_SUPPORT option and associated dead code.
Signed-off-by: David Müller <d.mueller@elsoft.ch>
2016-02-08 10:22:44 -05:00
Simon Glass
492f46c4f8 dm: pxa: serial: Drop serial_sa1100 serial driver
This does not appear to be used, and has not been converted to driver model
by the deadline (doc/driver-model/serial-howto.txt).

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
2016-02-08 10:10:42 -05:00
Simon Glass
30b9d753ab dm: serial: Drop serial_max3100 serial driver
This does not appear to be used, and has not been converted to driver model
by the deadline (doc/driver-model/serial-howto.txt).

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
2016-02-08 10:10:42 -05:00
Simon Glass
c3dd5787a3 dm: freescale: serial: Drop serial_imx serial driver
This does not appear to be used, and has not been converted to driver model
by the deadline (doc/driver-model/serial-howto.txt).

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
2016-02-08 10:10:41 -05:00
Simon Glass
be479339bd dm: opencores: Drop opencores_yanu serial driver
This does not appear to be used, and has not been converted to driver model
by the deadline (doc/driver-model/serial-howto.txt).

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
2016-02-08 10:10:41 -05:00
Simon Glass
baf7125aca dm: freescale: Drop mxs_auart serial driver
This does not appear to be used, and has not been converted to driver model
by the deadline (doc/driver-model/serial-howto.txt).

Signed-off-by: Simon Glass <sjg@chromium.org>
2016-02-08 10:10:40 -05:00
Vikas Manocha
dffceb4b15 serial: serial_stm32: move clock config from driver to board
This patch removes the uart clock enable from serial driver & move it in the
board code.

Signed-off-by: Vikas Manocha <vikas.manocha@st.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2016-02-08 10:10:36 -05:00
Bin Meng
a187559e3d Use correct spelling of "U-Boot"
Correct spelling of "U-Boot" shall be used in all written text
(documentation, comments in source files etc.).

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Heiko Schocher <hs@denx.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Minkyu Kang <mk7.kang@samsung.com>
2016-02-06 12:00:59 +01:00
Bhuvanchandra DV
5160def267 dm: lpuart: Drop the legacy code
All boards using this driver are with device tree support,
hence drop the legacy code in driver to have a pure DT solution.

Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2016-02-02 21:36:09 +01:00
Paul Thacker
9e160ee823 drivers: serial: add driver for Microchip PIC32 UART controller.
This adds PIC32 UART controller support based on driver model.

Signed-off-by: Paul Thacker <paul.thacker@microchip.com>
Signed-off-by: Purna Chandra Mandal <purna.mandal@microchip.com>
Reviewed-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2016-02-01 22:14:00 +01:00
Ricardo Ribalda Delgado
80cce2629b ppc: xilinx-ppc4xx: Port to DM serial
xilinx_uartlite has been ported to DM, this patch makes the
xilinx-ppc405-generic and the xilinx-ppc440-generic boards use the new
DM driver.

Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com>
Acked-by: Stefan Roese <sr@denx.de>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Michal Simek <michal.simek@xilinx.com>
2016-01-27 15:57:11 +01:00
Michal Simek
842efb3a93 serial: zynq: Fix address reading from DM
Use dev_get_addr() instead of reading reg base directly in the driver.
Core function is also more robust.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-01-27 15:55:54 +01:00
Michal Simek
a2533183c0 serial: zynq: Extend compatible string list
ZynqMP is using updated core with cdns,uart-r1p12 compatible string.

Signed-off-by: Michal Simek <monstr@monstr.eu>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-01-27 15:55:54 +01:00
Michal Simek
54e24d3332 serial: uartlite: Add uartlite to Kconfig
- Move config option out of board file.
- Remove uartlite address from config file

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Thomas Chou <thomas@wytron.com.tw>
2016-01-27 15:55:49 +01:00
Michal Simek
4166ba3b23 serial: uartlite: Add support for debug console
Add support for debug console.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Thomas Chou <thomas@wytron.com.tw>
2016-01-27 15:55:49 +01:00
Michal Simek
93768393d7 serial: uartlite: Move driver to DM
Enable SPL DM too.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Thomas Chou <thomas@wytron.com.tw>
2016-01-27 15:55:49 +01:00
Thomas Chou
cc4228f9d6 ns16550: zap the rockchip serial compatible string
Zap the rockchip serial compatible string, because rockchip
serial has "snps,dw-apb-uart" compatible string in the dts.

Signed-off-by: Thomas Chou <thomas@wytron.com.tw>
Acked-by: Simon Glass <sjg@chromium.org>
2016-01-25 10:40:04 -05:00
Tom Rini
0080931abf serial: Remove serial_putc_raw_dev
clang-3.8 reports that serial_putc_raw_dev in serial_ns16550.c is
unused.  Further investigation shows that we have 3 places that
implement this function and no callers, remove.

Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2016-01-25 10:39:45 -05:00
Simon Glass
3ade5bc4dc dm: video: sandbox: Convert sandbox to use driver model for video
Now that driver model support is available, convert sandbox over to use it.
We can remove a few of the special hooks that sandbox currently has.

Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: Anatolij Gustschin <agust@denx.de>
2016-01-20 19:10:16 -07:00
Bin Meng
fdbae099bf serial: lpuart: Add driver model serial support
This adds driver model support to lpuart serial driver.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Acked-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com>
Tested-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com>
2016-01-20 19:10:14 -07:00
Bin Meng
6ca13b1239 serial: lpuart: Prepare the driver for DM conversion
Create internal routines which take lpuart's register base as
a parameter, in preparation for driver model conversion.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Acked-by: Simon Glass <sjg@chromium.org>
2016-01-20 19:10:14 -07:00
Bin Meng
ed3021af5c serial: lpuart: Call local version of setbrg and putc directly
There is no need to go through serial driver subsystem, instead
call the driver's setbrg and putc routines directly.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Acked-by: Simon Glass <sjg@chromium.org>
2016-01-20 19:10:14 -07:00
Bin Meng
47f1bfca40 serial: lpuart: Fix several cosmetic issues
Clean up the driver codes a little bit, by:
- Use tab instead of space in the macro defines
- Use single line comment whenever possible
- Fix insertion of blank lines

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Acked-by: Simon Glass <sjg@chromium.org>
2016-01-20 19:10:14 -07:00
Bin Meng
5ed07cf53c serial: lpuart: Move CONFIG_FSL_LPUART to Kconfig
LPUART is seen on Freescale VF610 and QorIQ Layerscape devices.
Create a Kconfig option and move it to defconfig for all boards
that have this serial driver.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Acked-by: Stefan Agner <stefan.agner@toradex.com>
Acked-by: Simon Glass <sjg@chromium.org>
2016-01-20 19:10:14 -07:00
Sergey Temerkhanov
19de81502b arm: serial: Add Kconfig entries to facilitate usage of the pl01x driver for early debug output
This patch adds Kconfig entries to facilitate usage of pl01x as
a debug UART.

Signed-off-by: Sergey Temerkhanov <s.temerkhanov@gmail.com>
Signed-off-by: Radha Mohan Chintakuntla <rchintakuntla@cavium.com>

Acked-by: Simon Glass <sjg@chromium.org>
2016-01-19 22:25:35 +00:00
Sergey Temerkhanov
b81406db51 arm: serial: Add debug UART capability to the pl01x driver
This patch adds an ability to use pl01x as a debug UART. It must
be configured like other types of debug UARTs

Signed-off-by: Sergey Temerkhanov <s.temerkhanov@gmail.com>
Signed-off-by: Radha Mohan Chintakuntla <rchintakuntla@cavium.com>
[trini: Update for _debug_uart_init change]
Acked-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Tom Rini <trini@konsulko.com>
2016-01-19 22:25:22 +00:00
Tom Rini
5b8031ccb4 Add more SPDX-License-Identifier tags
In a number of places we had wordings of the GPL (or LGPL in a few
cases) license text that were split in such a way that it wasn't caught
previously.  Convert all of these to the correct SPDX-License-Identifier
tag.

Signed-off-by: Tom Rini <trini@konsulko.com>
2016-01-19 08:31:21 -05:00
Vladimir Zapolskiy
f21069ed82 serial: lpc32xx hsuart: port driver to driver model
The change ports NXP LPC32xx 14-clock UART device driver to driver
model.

Signed-off-by: Vladimir Zapolskiy <vz@mleia.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2016-01-13 21:05:22 -05:00
Simon Glass
b7e29834f1 dm: ns16550: Allow the driver to be omitted if requested
Allow the ns16550 debug UART to be used without the full driver.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Thomas Chou <thomas@wytron.com.tw>
2016-01-12 10:19:09 -07:00
Simon Glass
92c55b682c dm: serial: Allow the UART driver to be dropped from the image
In very very space-constrained devices even the full UART driver is too
large. In this case the debug UART can still be used in some cases.

Add options to enable the UART driver in SPL and U-Boot proper. Enable both
options by default.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Thomas Chou <thomas@wytron.com.tw>
2016-01-12 10:19:09 -07:00
Simon Glass
fcc0a8774b dm: serial: Convert ns16550 driver to use driver model PCI API
Use the driver model version of the function to find the BAR. This updates
the fdtdec function, of which ns16550 is the only user.

The fdtdec_get_pci_bdf() function is dropped for several reasons:
- with driver model we should use 'struct udevice *' rather than passing the
   device tree offset explicitly
- there are no other users in the tree
- the function parses for information which is already available in the PCI
device structure (specifically struct pci_child_platdata which is available
at dev_get_parent_platdata(dev)

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Tested-by: Bin Meng <bmeng.cn@gmail.com>
2016-01-12 10:19:09 -07:00
Michal Simek
80dc99972b serial: zynq: Use static inline for _debug_uart_init()
Mark _debug_uart_init() as static to avoid sparse warning and
inline it to debug_uart_init().

Reported-by: Thomas Chou <thomas@wytron.com.tw>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Thomas Chou <thomas@wytron.com.tw>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Acked-by: Simon Glass <sjg@chromium.org>
2016-01-08 10:15:45 -05:00
Tom Rini
f1993ca066 Merge branch 'master' of git://www.denx.de/git/u-boot-imx 2016-01-03 10:32:24 -05:00
Maximilian Schwerin
434afa809e serial_mxc: Fix setup of UARTx_UFCR register
This patch writes the default values for TXTL and RXTL to UARTx_UFCR.
Without this patch some older kernel versions crash as UARTx_UFCR was
not always correctly initialized.

Signed-off-by: Maximilian Schwerin <maximilian.schwerin@tigris.de>
2016-01-03 15:22:11 +01:00
Kamil Lulko
665624149a stm32: Convert serial driver to DM
Signed-off-by: Kamil Lulko <kamil.lulko@gmail.com>
Cc: Simon Glass <sjg@chromium.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
2015-12-12 15:56:08 -05:00
Stefan Roese
eb623b98c9 dm: serial: Minor coding style cleanup of some comments
Fix incorrect comment alignments.

Signed-off-by: Stefan Roese <sr@denx.de>
Cc: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Acked-by: Simon Glass <sjg@chromium.org>
2015-12-10 20:42:03 -07:00
Michal Simek
c643f3ef9b serial: zynq: Remove duplicated header
debug_uart.h is included twice.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2015-12-07 10:14:30 +01:00
Michal Simek
6bf87dacd9 serial: zynq: Fix incorrect reference to s5p driver
Remove this c&p error from s5p driver.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2015-12-07 10:14:29 +01:00
Simon Glass
b7e5a6439f dm: serial: ns16550: Add pre-reloc flag to the driver
For platforms that don't use device tree in SPL the only way to mark this
driver as 'required by relocation' is with the DM_FLAG_PRE_RELOC flag. Add
this to ensure that the driver is bound.

Fixes: fde7e18938 ("dm: tegra: pci: Move CONFIG_PCI_TEGRA to Kconfig")
Signed-off-by: Simon Glass <sjg@chromium.org>
Reported-by: Stephen Warren <swarren@nvidia.com>
Acked-by: Thomas Chou <thomas@wytron.com.tw>
2015-12-05 18:22:38 -05:00
Thomas Chou
80e0614670 ns16550: change reg-shift property default to zero
Change reg-shift property default to zero. When the integer property
is missing, it should be taken as zero. This is consistent to Linux
drivers/tty/serial/of_serial.c.

The x86 and most powerpc use reg-shift of 0. Most others use reg-shift
of 2. While reg-shift of 1 is rarely used.

Signed-off-by: Thomas Chou <thomas@wytron.com.tw>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Mugunthan V N <mugunthanvnm@ti.com>
Acked-by: Simon Glass <sjg@chromium.org>
2015-12-05 18:22:29 -05:00
Vagrant Cascadian
1b25e586cb Fix typo: firstly -> first.
Signed-off-by: Vagrant Cascadian <vagrant@debian.org>
Acked-by: Marek Vasut <marex@denx.de>
2015-12-05 18:22:23 -05:00
huang lin
a51dbebf30 rockchip: serial driver support rk3036
Signed-off-by: Lin Huang <hl@rock-chips.com>
Acked-by: Simon Glass <sjg@chromium.org>
2015-12-01 08:07:22 -07:00
Thomas Chou
9e39003e7f ns16550: move CONFIG_SYS_NS16550 to Kconfig
Move CONFIG_SYS_NS16550 to Kconfig, and run moveconfig.py.

Signed-off-by: Thomas Chou <thomas@wytron.com.tw>
2015-11-21 21:50:18 -05:00
Thomas Chou
4fb6055211 ns16550: zap CONFIG_NS16550_SERIAL
Zap CONFIG_NS16550_SERIAL, as the unification of ns16550 drivers
is completed.

Signed-off-by: Thomas Chou <thomas@wytron.com.tw>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Acked-by: Simon Glass <sjg@chromium.org>
2015-11-21 21:50:17 -05:00
Thomas Chou
c7b9686d5d ns16550: unify serial_omap
Unify serial_omap, and use the generic binding.

Signed-off-by: Thomas Chou <thomas@wytron.com.tw>
Reviewed-by: Tom Rini <trini@konsulko.com>
Acked-by: Simon Glass <sjg@chromium.org>
2015-11-21 21:50:17 -05:00
Thomas Chou
1874626b2b ns16550: unify serial_tegra
Unify serial_tegra, and use the generic binding.

Signed-off-by: Thomas Chou <thomas@wytron.com.tw>
Reviewed-by: Tom Rini <trini@konsulko.com>
Acked-by: Simon Glass <sjg@chromium.org>
2015-11-21 21:50:16 -05:00
Thomas Chou
ace59da137 ns16550: unify serial_dw
Unify serial_dw, and use the generic binding.

Signed-off-by: Thomas Chou <thomas@wytron.com.tw>
Reviewed-by: Tom Rini <trini@konsulko.com>
Acked-by: Simon Glass <sjg@chromium.org>
2015-11-21 21:50:16 -05:00
Thomas Chou
fcd3367ce9 ns16550: unify serial_keystone
Unify serial_keystone, and use the generic binding.

Signed-off-by: Thomas Chou <thomas@wytron.com.tw>
Reviewed-by: Tom Rini <trini@konsulko.com>
Acked-by: Simon Glass <sjg@chromium.org>
2015-11-21 21:50:15 -05:00
Thomas Chou
98a51fc3d7 ns16550: unify serial_rockchip
Unify serial_rockchip, and use the generic binding.

Signed-off-by: Thomas Chou <thomas@wytron.com.tw>
Reviewed-by: Tom Rini <trini@konsulko.com>
Tested-by: Ariel D'Alessandro <ariel@vanguardiasur.com.ar>
Acked-by: Simon Glass <sjg@chromium.org>
2015-11-21 21:50:15 -05:00
Thomas Chou
f27445cbdc ns16550: unify serial_ppc
Unify serial_ppc, and use the generic binding.

Signed-off-by: Thomas Chou <thomas@wytron.com.tw>
Reviewed-by: Tom Rini <trini@konsulko.com>
[trini: Add TODO comment]
Signed-off-by: Tom Rini <trini@konsulko.com>
2015-11-21 21:50:04 -05:00
Thomas Chou
81cd63a991 ns16550: unify serial_x86
Unify serial_x86, and use the generic binding.

Signed-off-by: Thomas Chou <thomas@wytron.com.tw>
Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Acked-by: Simon Glass <sjg@chromium.org>
2015-11-20 20:41:30 -05:00
Thomas Chou
8e62d32e5b ns16550: add generic binding to unify the drivers
Add generic binding to unify ns16550 drivers. There are
several drivers using almost the same code, such as serial_dw,
serial_keystone, serial_omap, serial_ppc, serial_rockchip,
serial_tegra.c, and serial_x86. But each is platform specific.

The key difference between these drivers is the way to get
input clock frequency. With this unified approach, fixed clock
frequency should be extracted from "clock-frequency" property of
device tree blob. If this property is not available, the macro
CONFIG_SYS_NS16550_CLK will be used. It can be a constant or a
function to get clock, eg, get_serial_clock().

Signed-off-by: Thomas Chou <thomas@wytron.com.tw>
Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Heiko Schocher <hs@denx.de>
Acked-by: Simon Glass <sjg@chromium.org>
2015-11-20 20:41:29 -05:00
Thomas Chou
77d7b5cd40 ns16550: change map_sysmem to map_physmem
Change map_sysmem() to map_physmem(,,MAP_NOCACHE). Though map_sysmem()
can be used to map system memory, it might be wrong to use it for I/O
ports.  The map_physmem() serves the same purpose to translate physical
address to virtual address with the additional flag to take care of cache
property. Most drivers use map_physmem() since I/O ports access should be
uncached. As ns16550 is a driver, it should use map_physmem() rather
than map_sysmem().

Signed-off-by: Thomas Chou <thomas@wytron.com.tw>
Acked-by: Simon Glass <sjg@chromium.org>
2015-11-20 20:41:29 -05:00
Thomas Chou
b1e361b605 debug_uart: restore ns16550 as default
Since commit 220e8021af ("nios2: convert altera_jtag_uart to
driver model"), the default debug uart was changed. Most people
use ns16550 UART, so restore it as default.

Signed-off-by: Thomas Chou <thomas@wytron.com.tw>
Reported-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
Reported-by: Ariel D'Alessandro <ariel@vanguardiasur.com.ar>
Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Heiko Schocher <hs@denx.de>
Acked-by: Simon Glass <sjg@chromium.org>
2015-11-20 20:41:28 -05:00
Thomas Chou
1ec60b9321 altera_uart: change ioremap to map_physmem
Change ioremap() to map_physmem(), as it is more used in u-boot.

Signed-off-by: Thomas Chou <thomas@wytron.com.tw>
Reviewed-by: Marek Vasut <marex@denx.de>
2015-11-18 21:18:30 +08:00
Thomas Chou
18c3f27016 altera_jtag_uart: change ioremap to map_physmem
Change ioremap() to map_physmem(), as it is more used in u-boot.

Signed-off-by: Thomas Chou <thomas@wytron.com.tw>
Reviewed-by: Marek Vasut <marex@denx.de>
2015-11-18 21:18:30 +08:00
Francois Retief
e43ce3fca7 sparc: leon3: Add debug_uart support to LEON3 serial driver.
Signed-off-by: Francois Retief <fgretief@spaceteq.co.za>
2015-11-13 10:23:33 +02:00
Thomas Chou
e03c17d053 altera_uart: Adjust the declaration of debug_uart_init()
Follow commit 97b0597302 ("debug_uart: Adjust the declaration of
debug_uart_init()")

Signed-off-by: Thomas Chou <thomas@wytron.com.tw>
Reviewed-by: Marek Vasut <marex@denx.de>
Reviewed-by: Chin Liang See <clsee@altera.com>
2015-11-06 12:56:46 +08:00
Thomas Chou
933529ce15 altera_jtag_uart: Adjust the declaration of debug_uart_init()
Follow commit 97b0597302 ("debug_uart: Adjust the declaration of
debug_uart_init()")

Signed-off-by: Thomas Chou <thomas@wytron.com.tw>
Reviewed-by: Marek Vasut <marex@denx.de>
Reviewed-by: Chin Liang See <clsee@altera.com>
2015-11-06 12:56:46 +08:00
Thomas Chou
892414829c serial: altera_uart: minor clean up
- Moved macro definitions to top
- Re-arrange header includes ascending order
- Remove unused header linux/compiler.h
- Remove the penultimate comma in of_match ids

Signed-off-by: Thomas Chou <thomas@wytron.com.tw>
Reviewed-by: Jagan Teki <jteki@openedev.com>
2015-11-06 09:14:11 +08:00
Thomas Chou
d0b1483065 serial: altera_uart: use BIT macro
Replace numerical bit shift with BIT macro
in altera_uart

:%s/(1 << nr)/BIT(nr)/g
where nr = 0, 1, 2 .... 31

Signed-off-by: Thomas Chou <thomas@wytron.com.tw>
Reviewed-by: Jagan Teki <jteki@openedev.com>
2015-11-06 09:14:11 +08:00
Thomas Chou
315acd08b3 serial: altera_jtag_uart: minor clean up
- Moved macro definitions to top
- Give spaces around the '>>' in ALTERA_JTAG_WSPACE()
- Re-arrange header includes ascending order
- Remove unused header linux/compiler.h
- Remove the penultimate comma in of_match ids

Signed-off-by: Thomas Chou <thomas@wytron.com.tw>
Reviewed-by: Jagan Teki <jteki@openedev.com>
2015-11-06 09:14:11 +08:00
Thomas Chou
886161a445 serial: altera_jtag_uart: use BIT macro
Replace numerical bit shift with BIT macro
in altera_jtag_uart

:%s/(1 << nr)/BIT(nr)/g
where nr = 0, 1, 2 .... 31

Signed-off-by: Thomas Chou <thomas@wytron.com.tw>
Reviewed-by: Jagan Teki <jteki@openedev.com>
2015-11-06 09:14:11 +08:00
Simon Glass
42800ffa79 arm: zynq: Move serial driver to driver model
Update this driver to use driver model and change all users.

Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2015-11-04 14:49:53 +01:00
Simon Glass
325c8d569e arm: zynq: serial: Drop non-device-tree serial driver portions
Since we use device tree in SPL also, we can drop this code.

Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2015-11-04 14:49:53 +01:00
Simon Glass
c54c0a4c1c arm: zynq: Support the debug UART
Add support for the debug UART to assist with early debugging. Enable it
for Zybo as an example.

Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2015-11-04 14:49:52 +01:00
Simon Glass
6bdc593e96 dm: serial: Deal with stdout-path with an alias
Sometimes stdout-path contains a UART alias along with speed, etc. For
example:

	stdout-path = "serial0:115200n8";

Add support for decoding this.

Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2015-11-04 14:49:52 +01:00
Lokesh Vutla
6c2441c1d3 dm: keystone: serial: Add driver model support
Add driver model support for keystone serial driver.

Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Acked-by: Simon Glass <sjg@chromium.org>
2015-10-23 10:53:46 -04:00
Thomas Chou
2e2da4c67d serial: remove altera serial initializations
Both altera_jtag_serial_initialize() and
altera_serial_initialize() are no longer used after
they are converted to driver model.

Signed-off-by: Thomas Chou <thomas@wytron.com.tw>
Acked-by: Simon Glass <sjg@chromium.org>
Acked-by: Marek Vasut <marex@denx.de>
2015-10-23 07:37:03 +08:00
Thomas Chou
da2f838d8a nios2: convert altera_uart to driver model
Convert altera_uart to driver model.

Signed-off-by: Thomas Chou <thomas@wytron.com.tw>
Reviewed-by: Simon Glass <sjg@chromium.org>
Acked-by: Marek Vasut <marex@denx.de>
2015-10-23 07:36:51 +08:00
Thomas Chou
220e8021af nios2: convert altera_jtag_uart to driver model
Convert altera_jtag_uart to driver model.

Signed-off-by: Thomas Chou <thomas@wytron.com.tw>
Acked-by: Marek Vasut <marex@denx.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
2015-10-23 07:36:37 +08:00
Mugunthan V N
e5a098b5cc drivers: serial: serial_omap: add comaptibles for all ti platforms
Adding compatibles for am335x, am437x and dra7 platforms.

Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com>
Reviewed-by: Lokesh Vutla <lokeshvutla@ti.com>
2015-10-22 14:43:58 -04:00
Mugunthan V N
3a64845e9d drivers: serial: serial_omap: populate default clock frequency when not found in dt
In some platforms like am437x, serial node is not populated with
clock-frequency node. So in that case have a default clock-clock
frequency.

Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com>
Reviewed-by: Lokesh Vutla <lokeshvutla@ti.com>
2015-10-22 14:43:58 -04:00
Simon Glass
c7fefcb912 debug_uart: Add an option to announce the debug UART
It is useful to see a message from the debug UART early during boot so that
you know things are working. Add an option to enable this. The message will
be displayed as soon as debug_uart_init() is called.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2015-10-21 07:46:50 -06:00
Simon Glass
0e977bc145 debug_uart: Support board-specific UART initialisation
Some boards need to set things up before the debug UART can be used. On
these boards a call to debug_uart_init() is insufficient. When this option
is enabled, the function board_debug_uart_init() will be called when
debug_uart_init() is called. You can put any code here that is needed to
set up the UART ready for use, such as set pin multiplexing or enable
clocks.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2015-10-21 07:46:50 -06:00
Simon Glass
97b0597302 debug_uart: Adjust the declaration of debug_uart_init()
We want to be able to add other common code to this function. So change the
driver's version to have an underscore before it, just like
_debug_uart_putc(). Define debug_uart_init() to call this version.

Update all drivers to this new method.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2015-10-21 07:46:50 -06:00
Masahiro Yamada
d18f37c72b serial: rockchip: make ROCKCHIP_SERIAL depend on ARCH_ROCKCHIP
It looks like this line was copy-pasted, but not modified.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Simon Glass <sjg@chromium.org>
2015-10-03 10:24:33 -06:00
Stefan Roese
68282f55b8 arm: Remove unused ST-Ericsson u8500 arch
This arch does not seem to be supported / used at all in the current
U-Boot mainline source tree any more. So lets remove the core u8500 code
and code that was only referenced by this platform.

Please note that this patch also removes these config options:

- CONFIG_PL011_SERIAL_RLCR
- CONFIG_PL011_SERIAL_FLUSH_ON_INIT

As they only seem to be referenced by u8500 based boards. Without any
such board in the current code, these config option don't make sense
any more. Lets remove them as well.

If someone still wants to use this platform, then please send patches
to re-enable support by adding at least one board that references this
code.

Signed-off-by: Stefan Roese <sr@denx.de>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: John Rigby <john.rigby@linaro.org>
Cc: Simon Glass <sjg@chromium.org>
Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
Cc: Tom Rini <trini@konsulko.com>
Cc: Heiko Schocher <hs@denx.de>
Cc: Albert Aribaud <albert.u.boot@aribaud.net>
Reviewed-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2015-09-15 15:05:21 -04:00
Tom Rini
850f788709 Merge branch 'rmobile' of git://git.denx.de/u-boot-sh 2015-09-13 17:25:16 -04:00
Tom Rini
c9feb427ab Merge git://git.denx.de/u-boot-rockchip 2015-09-03 14:57:09 -04:00
Simon Glass
765a1b1eb3 rockchip: Add serial support
Add support for the Rockchip serial device using the ns16550 driver.
This uses driver model and device tree for both SPL and U-Boot proper.

Signed-off-by: Simon Glass <sjg@chromium.org>
2015-09-02 21:28:23 -06:00
Masahiro Yamada
2ea65f3e22 serial: drop redundant depends on
SANDBOX_SERIAL depends on SANDBOX, and SANDBOX selects DM.
So, "SANDBOX_SERIAL depends on DM" is redundant.

Likewise, UNIPHIER_SERIAL depends on ARCH_UNIPHIER, and
ARCH_UNIPHIER selects DM_SERIAL.
So, "UNIPHIER_SERIAL depends on DM_SERIAL" is redundant.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Simon Glass <sjg@chromium.org>
2015-09-02 11:33:09 -04:00
Simon Glass
4e9838c102 dm: Use dev_get_addr() where possible
This is a convenient way for a driver to get the hardware address of a
device, when regmap or syscon are not being used. Change existing callers
to use it as an example to others.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Joe Hershberger <joe.hershberger@ni.com>
Acked-by: Stephen Warren <swarren@wwwdotorg.org>
2015-08-31 07:57:26 -06:00
Vladimir Barinov
53be7bf2a5 serial: serial-sh: SCIFA interface for R-Car Gen2 SoCs
Add SCIFA console interface for R-Car Gen2 SoCs.
SCIFA has different registers offsets and sizes then SCI. Hence it needs to
put it's macro definitions separately.

Signed-off-by: Vladimir Barinov <vladimir.barinov@cogentembedded.com>
Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2015-08-31 17:31:26 +09:00
Masahiro Yamada
6d99cfaee8 serial: uniphier: drop platform data support
This driver is enabled only for UniPhier SoCs and ARCH_UNIPHIER now
selects OF_CONTROL and SPL_OF_CONTROL.

This driver no longer needs to support platform data configuration.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2015-08-31 00:28:46 +09:00
Marcel Ziswiler
8648b2358a serial: pxa: clean-up include file order
Cleaning up order of include files by sorting them alphabetically
keeping in mind to leave common.h on top.

Signed-off-by: Marcel Ziswiler <marcel@ziswiler.com>
2015-08-24 20:30:38 +02:00
Masahiro Yamada
0f9258228e of: clean up OF_CONTROL ifdef conditionals
We have flipped CONFIG_SPL_DISABLE_OF_CONTROL.  We have cleansing
devices, $(SPL_) and CONFIG_IS_ENABLED(), so we are ready to clear
away the ugly logic in include/fdtdec.h:

 #ifdef CONFIG_OF_CONTROL
 # if defined(CONFIG_SPL_BUILD) && !defined(SPL_OF_CONTROL)
 #  define OF_CONTROL 0
 # else
 #  define OF_CONTROL 1
 # endif
 #else
 # define OF_CONTROL 0
 #endif

Now CONFIG_IS_ENABLED(OF_CONTROL) is the substitute.  It refers to
CONFIG_OF_CONTROL for U-boot proper and CONFIG_SPL_OF_CONTROL for
SPL.

Also, we no longer have to cancel CONFIG_OF_CONTROL in
include/config_uncmd_spl.h and scripts/Makefile.spl.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
2015-08-18 13:46:05 -04:00
Tom Rini
57cd681b68 dra7xx: Add dra72_evm_defconfig using CONFIG_DM
- Import various DT files for DRA7 / DR72x / dra72-evm from Linux Kernel
  v4.1
- Add config file for this board, enable DM and DM_GPIO

Cc: Simon Glass <sjg@chromium.org>
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2015-08-12 20:48:08 -04:00
Masahiro Yamada
0b11dbf705 drivers: hierarchize drivers Kconfig menu
The menuconfig for drivers are getting more and more cluttered
and unreadable because too many entries are displayed in a single
flat menu.  Use hierarchic menu for each category.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
[trini: Update to apply again in a few places, drop USB hunk]
Signed-off-by: Tom Rini <trini@konsulko.com>
2015-08-12 20:47:44 -04:00
Hans de Goede
8c4585881d dm: serial: Add a REQUIRE_SERIAL_CONSOLE option for boards with no serial port
Currently the serial code assumes that there is always at least one serial
port (and panics / crashes due to null pointer dereferences when there is
none).

This makes it impossible to use u-boot on boards where there is no (debug)
serial port, because e.g. all uart pins are muxed to another function.

This commit adds a CONFIG_REQUIRE_SERIAL_CONSOLE Kconfig option, which
defaults to y (preserving existing behavior), which can be set to n on
such boards to make them work.

This commit only implements this for CONFIG_DM_SERIAL=y configs, as allowing
running without a serial port for CONFIG_DM_SERIAL=n configs is non trivial,
and is not necessary at this moment.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Simon Glass <sjg@chromium.org>
2015-08-10 07:01:28 -06:00
Simon Glass
7fb57396e6 exynos: Enable the debug UART in SPL
As a debugging aid, allow UART3 to be used as a debug UART in SPL. This
is a precursor to proper UART support, which requires a substantial
refactor.

Signed-off-by: Simon Glass <sjg@chromium.org>
2015-08-05 21:06:11 -06:00
Simon Glass
bf6e702232 exynos: Add debug UART support for Samsung S5P serial
Add a debug UART implementation for this serial driver. It does not set up
pinmux automatically - this must be done before calling debug_uart_init().

Signed-off-by: Simon Glass <sjg@chromium.org>
2015-08-05 21:06:11 -06:00
Simon Glass
89ca9351cf exynos: serial: Refactor init code for debug UART
The debug UART code needs to perform the same init as the normal UART
driver. In preparation for this, move the init code into two functions, one
for the basic init and one for setting the baud rate. This will make adding
debug UART support easier.

Signed-off-by: Simon Glass <sjg@chromium.org>
2015-08-05 21:06:11 -06:00
Simon Glass
275854baee efi: Add a serial driver
Add a serial driver which makes use of EFI's console in/out service.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Tested on Intel Crown Bay and QEMU
Tested-by: Bin Meng <bmeng.cn@gmail.com>
2015-08-05 08:44:05 -06:00
Simon Glass
dcfe4a54ed x86: Move CONFIG_X86_SERIAL to Kconfig
Move this config option to Kconfig and tidy up.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2015-08-05 08:42:42 -06:00
Simon Glass
753812cb2e dm: serial: Correct logic in serial_find_console_or_panic()
In a final attempt to find a console UART this function uses the first
first available serial device. However the check for a valid device is
inverted.

This code is only executed when there is in fact no serial UART, but at
present it can fail to reach the panic_str() call in this case, and start
trying to use a non-existent UART.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2015-08-05 08:42:40 -06:00
Simon Glass
6e780c7a7b ns16550: Improve debug UART so it can work with 32-bit access
Since Rockchip requires 32-bit serial access, add this to the driver.
Refactor a little to make this easier.

Signed-off-by: Simon Glass <sjg@chromium.org>
2015-07-21 17:39:28 -06:00
Siva Durga Prasad Paladugu
e05412f5ec arm: dcc: Add uart dcc support for armv8
Added UART DCC support for armv8

Signed-off-by: Siva Durga Prasad Paladugu <sivadur@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
2015-07-07 11:39:39 +02:00
Simon Glass
af28224546 sandbox: Move CONFIG_SANDBOX_SERIAL to Kconfig
Move this over to Kconfig and tidy up.

Signed-off-by: Simon Glass <sjg@chromium.org>
2015-06-10 19:26:55 -06:00