Commit graph

165 commits

Author SHA1 Message Date
Vladimir Zapolskiy
2c808a12ea kgdb: configs: remove obsolete CONFIG_KGDB_SER_INDEX
The last users of CONFIG_KGDB_SER_INDEX were removed more than 3 years
ago in commits 550650ddd0 and bf16500f79, either kgdb subsystem should
care about this parameter or it should be gone completely.

Signed-off-by: Vladimir Zapolskiy <vz@mleia.com>
2013-12-13 09:15:32 -05:00
York Sun
5614e71b49 Driver/DDR: Moving Freescale DDR driver to a common driver
Freescale DDR driver has been used for mpc83xx, mpc85xx, mpc86xx SoCs.
The similar DDR controllers will be used for ARM-based SoCs.

Signed-off-by: York Sun <yorksun@freescale.com>
2013-11-25 11:43:43 -08:00
Rob Herring
cdb23792e8 config: remove platform CONFIG_SYS_HZ definition part 1/2
Remove platform CONFIG_SYS_HZ definition for configs A-Z*.

Signed-off-by: Rob Herring <rob.herring@calxeda.com>
2013-11-04 11:05:59 -05:00
Rob Herring
0defddc851 config: Add a default CONFIG_SYS_PROMPT
The definitions for CONFIG_SYS_PROMPT are varied with little reason other
than to display the board name. Over half the definitions are "==> ", so
make this the default. The rest of the boards remain unchanged to avoid
breaking any external scripts expecting a certain prompt.

Signed-off-by: Rob Herring <rob.herring@calxeda.com>
Reviewed-by: Fabio Estevam <fabio.estevam@freescale.com>
2013-11-04 11:02:14 -05:00
Wolfgang Denk
3765b3e7bd Coding Style cleanup: remove trailing white space
Signed-off-by: Wolfgang Denk <wd@denx.de>
2013-10-14 16:06:53 -04:00
Rob Herring
344ca0b40c ahci: convert to use libata functions and definitions
libata already has similar functions as implemented in the ahci code.
Refactor the code to use the libata variants and remove the dependency on
ata.h. Convert some defines to use the version from libata.h. Also, remove
some unnecessary memset's of bss data.

This is a step toward hopefully merging ahci.c and dw_ahsata.c which are
essentially the same driver.

Signed-off-by: Rob Herring <rob.herring@calxeda.com>
Reviewed-by: Tom Rini <trini@ti.com>
2013-09-06 13:09:07 -04:00
Tom Rini
c2120fbfbc Merge branch 'master' of git://git.denx.de/u-boot-i2c
The sandburst-specific i2c drivers have been deleted, conflict was just
over the SPDX conversion.

Conflicts:
	board/sandburst/common/ppc440gx_i2c.c
	board/sandburst/common/ppc440gx_i2c.h

Signed-off-by: Tom Rini <trini@ti.com>
2013-07-24 09:50:24 -04:00
Wolfgang Denk
1a4596601f Add GPL-2.0+ SPDX-License-Identifier to source files
Signed-off-by: Wolfgang Denk <wd@denx.de>
[trini: Fixup common/cmd_io.c]
Signed-off-by: Tom Rini <trini@ti.com>
2013-07-24 09:44:38 -04:00
Heiko Schocher
00f792e0df i2c, fsl_i2c: switch to new multibus/multiadapter support
- added to fsl_i2c driver new multibus/multiadpater support
- adapted all config files, which uses this driver

Signed-off-by: Heiko Schocher <hs@denx.de>
Cc: Simon Glass <sjg@chromium.org>
Cc: Stephen Warren <swarren@wwwdotorg.org>
2013-07-23 08:34:53 +02:00
Heiko Schocher
ea818dbbcd i2c, soft-i2c: switch to new multibus/multiadapter support
- added to soft_i2c driver new multibus/multiadpater support
- adapted all config files, which uses this driver

Signed-off-by: Heiko Schocher <hs@denx.de>
Cc: Simon Glass <sjg@chromium.org>
Cc: Stephen Warren <swarren@wwwdotorg.org>
2013-07-23 05:54:29 +02:00
Gabor Juhos
842033e696 pci: introduce CONFIG_PCI_INDIRECT_BRIDGE option
The pci_indirect.c file is always compiled when
CONFIG_PCI is defined although the indirect PCI
bridge support is not needed by every board.

Introduce a new CONFIG_PCI_INDIRECT_BRIDGE
config option and only compile indirect PCI
bridge support if this options is enabled.

Also add the new option into the configuration
files of the boards which needs that.

Compile tested for powerpc, x86, arm and nds32.
MAKEALL results:

powerpc:
  --------------------- SUMMARY ----------------------------
  Boards compiled: 641
  Boards with warnings but no errors: 2 ( ELPPC MPC8323ERDB )
  ----------------------------------------------------------
  Note: the warnings for ELPPC and MPC8323ERDB are present even
  without the actual patch.

x86:
  --------------------- SUMMARY ----------------------------
  Boards compiled: 1
  ----------------------------------------------------------

arm:
  --------------------- SUMMARY ----------------------------
  Boards compiled: 311
  ----------------------------------------------------------

nds32:
  --------------------- SUMMARY ----------------------------
  Boards compiled: 3
  ----------------------------------------------------------

Cc: Tom Rini <trini@ti.com>
Cc: Daniel Schwierzeck <daniel.schwierzeck@googlemail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
2013-06-07 14:17:01 -04:00
Marek Vasut
5368c55d4c COMMON: Use __stringify() instead of MK_STR()
Kill multiple occurances and redeclaration of MK_STR
in favor of __stringify().

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Wolfgang Denk <wd@denx.de>
Signed-off-by: Tom Rini <trini@ti.com>
2012-10-15 11:53:47 -07:00
Tom Rini
219f4788d3 hush.c: Move default CONFIG_SYS_PROMPT_HUSH_PS2 to hush.c
Exactly one board has defined CONFIG_SYS_PROMPT_HUSH_PS2 to a value
different than "> " which is vision2.  I have Cc'd the maintainer here
as I strongly suspect this is a bug rather than intentional behavior.

Cc: Stefano Babic <sbabic@denx.de>
Signed-off-by: Tom Rini <trini@ti.com>
Acked-by: Stefano Babic <sbabic@denx.de>
2012-06-20 20:36:51 +02:00
Joe Hershberger
b3f44c21ea common: cosmetic: CONFIG_BOOTFILE checkpatch compliance
Remove MK_STR from places that consume CONFIG_BOOTFILE to force all definitions to be string literals.

Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
Cc: Joe Hershberger <joe.hershberger@gmail.com>
Cc: Wolfgang Denk <wd@denx.de>
Acked-by: Mike Frysinger <vapier@gentoo.org>
2011-10-22 01:21:35 +02:00
Joe Hershberger
8b3637c662 common: cosmetic: CONFIG_ROOTPATH checkpatch compliance
Remove MK_STR from places that consume CONFIG_ROOTPATH to force all definitions to be string literals.

Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
Cc: Joe Hershberger <joe.hershberger@gmail.com>
Cc: Wolfgang Denk <wd@denx.de>
Acked-by: Mike Frysinger <vapier@gentoo.org>
2011-10-22 01:21:15 +02:00
Becky Bruce
1605cc9e1b powerpc/mpc86xx: Disable translation for BAT setup
We really shouldn't be overwriting bat registers with translation enabled,
especially when we're executing code using one of them for translating
the current instruction stream.  Instead, disable address translation
while doing the final BAT setup.

In order to do this, setup_bats has to move back to asm code, because we
require translation to be enabled to have a stack for C code.  The yucky
thing about that is that the assembler doesn't like ULL so we have to
switch to using HIGH/LOW pairs for physical addresses that are > 32 bits
in length.

Signed-off-by: Becky Bruce <beckyb@kernel.crashing.org>
Acked-by: York Sun <yorksun@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-10-09 17:57:54 -05:00
Becky Bruce
e3fd652087 powerpc/mpc8641hpcn: fix SRIO BAT config
There were duplicate (and conflicting) defines for the BATs used
to cover SRIO.  Drop the bogus set.

Signed-off-by: Becky Bruce <beckyb@kernel.crashing.org>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-10-09 17:57:53 -05:00
Mike Frysinger
31a4f1e5b6 board configs: drop NET_MULTI references
Now that none of the core checks CONFIG_NET_MULTI, there's not much point
in boards defining it.  So scrub all references to it.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-10-05 22:22:16 +02:00
Timur Tabi
eb0d47e181 powerpc/86xx: remove empty board_early_init_f()
Remove an empty board_early_init_f() from the MPC8641HPCN board.

Signed-off-by: Timur Tabi <timur@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-04-28 22:08:16 -05:00
Kumar Gala
1b77ca8afa powerpc/86xx: Convert MPC8641HPCN to use common SRIO init code
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-01-14 01:32:21 -06:00
Kumar Gala
64e55d5ed4 powerpc/86xx: Rework MPC8641HPCN pci_init_board to use common FSL PCIe code
Remove duplicated code in MPC8641HPCN board and utilize the common
fsl_pcie_init_board().  We also now dynamically setup the LAWs for PCI
controllers based on which PCIe controllers are enabled.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-01-14 01:32:20 -06:00
Wolfgang Denk
25ddd1fb0a Replace CONFIG_SYS_GBL_DATA_SIZE by auto-generated value
CONFIG_SYS_GBL_DATA_SIZE has always been just a bad workarond for not
being able to use "sizeof(struct global_data)" in assembler files.
Recent experience has shown that manual synchronization is not
reliable enough.  This patch renames CONFIG_SYS_GBL_DATA_SIZE into
GENERATED_GBL_DATA_SIZE which gets automatically generated by the
asm-offsets tool.  In the result, all definitions of this value can be
deleted from the board config files.  We have to make sure that all
files that reference such data include the new <asm-offsets.h> file.

No other changes have been done yet, but it is obvious that similar
changes / simplifications can be done for other, related macro
definitions as well.

Signed-off-by: Wolfgang Denk <wd@denx.de>
Acked-by: Kumar Gala <galak@kernel.crashing.org>
2010-10-26 21:05:30 +02:00
Wolfgang Denk
553f09823c Rename CONFIG_SYS_INIT_RAM_END into CONFIG_SYS_INIT_RAM_SIZE
CONFIG_SYS_INIT_RAM_END was a misnomer as it suggests this might be
some end address; to make the meaning more clear we rename it into
CONFIG_SYS_INIT_RAM_SIZE

No other code changes are performed in this patch, only minor editing
of white space (due to the changed length) and the comments was done,
where noticed.

Note that the code for the PATI and cmi_mpc5xx board configurations
looks seriously broken.  Last known maintainers on Cc:

Signed-off-by: Wolfgang Denk <wd@denx.de>
Cc: Denis Peter <d.peter@mpl.ch>
Cc: Martin Winistoerfer <martinwinistoerfer@gmx.ch>
Acked-by: Kumar Gala <galak@kernel.crashing.org>
2010-10-26 21:03:25 +02:00
Peter Tyser
d98b0523cf powerpc: Cleanup BOOTFLAG_* references
Now that warm booting is not supported, there isn't a need for the
BOOTFLAG_COLD and BOOTFLAG_WARM defines, so remove them.

Note that this change makes the board info bd_bootflags field useless.
It will always be set to 0, but we leave it around so that we don't
break the board info structure that some OSes are expecting to be passed
from U-Boot.

Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
2010-10-18 22:38:56 +02:00
Wolfgang Denk
2ae1824196 Makefile: move all Power Architecture boards into boards.cfg
Clean up Makefile, and drop a lot of the config.mk files on the way.

We now also automatically pick all boards that are listed in
boards.cfg (and with all configurations), so we can drop the redundant
entries from MAKEALL to avoid building these twice.

Signed-off-by: Wolfgang Denk <wd@denx.de>
2010-10-18 22:12:04 +02:00
Wolfgang Denk
14d0a02a16 Rename TEXT_BASE into CONFIG_SYS_TEXT_BASE
The change is currently needed to be able to remove the board
configuration scripting from the top level Makefile and replace it by
a simple, table driven script.

Moving this configuration setting into the "CONFIG_*" name space is
also desirable because it is needed if we ever should move forward to
a Kconfig driven configuration system.

Signed-off-by: Wolfgang Denk <wd@denx.de>
2010-10-18 22:07:10 +02:00
Peter Tyser
4bbfd3e279 ppc: Conditionally compile bat_rw.c
Only a few PPC boards actually use the common BAT manipulation
functions, so only compile it for them.

Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
2010-10-13 21:44:10 +02:00
Stefan Roese
24956642ef Remove unused CONFIG_SERIAL_SOFTWARE_FIFO feature
This patch removes the completely unused CONFIG_SERIAL_SOFTWARE_FIFO
feature from U-Boot. It has only been implemented for PPC4xx and was not
used at all. So let's remove it and make the code smaller and cleaner.

Signed-off-by: Stefan Roese <sr@denx.de>
Acked-by: Detlev Zundel <dzu@denx.de>
2010-09-23 09:02:05 +02:00
york
076bff8f47 powerpc/8xxx: Fix bug in memctrl interleaving & bank interleaving on cs0~cs4
Verified on MPC8641HPCN with four DDR2 dimms. Each dimm has dual
rank with 512MB each rank.

Also check dimm size and rank size for memory controller interleaving

Signed-off-by: York Sun <yorksun@freescale.com>
2010-07-26 13:16:09 -05:00
Kumar Gala
46f3e3851d powerpc/86xx: Rename PCI1/2 to PCIE1/2 on MPC8641HPCN & SBC8641
The MPC8641 boards actually only have PCIE not PCI.  Rename so we are
uniform with regards to names so we can replace this code with templated
code.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2010-07-20 04:37:11 -05:00
Kumar Gala
dd2cda3dbd powerpc/86xx: Move PCI/PCIe address defines into common immap_86xx.h
Remove dupliacted setting of PCI/PCIe address and offsets in board
config.h.  Renamed CONFIG_SYS_PCI1/2_ADDR to CONFIG_SYS_PCI1/2ADDR on
MPC8641 boards since its really PCIE controllers and not PCI.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2010-07-20 04:37:11 -05:00
Timur Tabi
9ff32d8ccf mpc86xx: set the DDR BATs after calculating true DDR size
After determining how much DDR is actually in the system, set DBAT0 and
IBAT0 accordingly.  This ensures that the CPU won't attempt to access
(via speculation) addresses outside of actual memory.

On 86xx systems, DBAT0 and IBAT0 (the BATs for DDR) are initialized to 2GB
and kept that way.  If the system has less than 2GB of memory (typical for
an MPC8610 HPCD), the CPU may attempt to access this memory during
speculation.  The zlib code is notorious for generating such memory reads,
and indeed on the MPC8610, uncompressing the Linux kernel causes a machine
check (without this patch).

Currently we are limited to power of two sized DDR since we only use a
single bat.  If a non-power of two size is used that is less than
CONFIG_MAX_MEM_MAPPED u-boot will crash.

Signed-off-by: Timur Tabi <timur@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2010-03-30 10:50:22 -05:00
Heiko Schocher
4b142febff common: delete CONFIG_SYS_64BIT_VSPRINTF and CONFIG_SYS_64BIT_STRTOUL
There is more and more usage of printing 64bit values,
so enable this feature generally, and delete the
CONFIG_SYS_64BIT_VSPRINTF and CONFIG_SYS_64BIT_STRTOUL
defines.

Signed-off-by: Heiko Schocher <hs@denx.de>
2009-12-08 22:14:07 +01:00
Paul Gortmaker
26df6aa991 mpc86xx: delete unused MPC86xx_DDR_SDRAM_CLK_CNTL define
This is an orphaned legacy leftover that is just polluting
the config file namespace.

Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-10-16 10:21:39 -05:00
Poonam Aggrwal
0e870980a6 8xxx: Removed CONFIG_NUM_CPUS from 85xx/86xx
The number of CPUs are getting detected dynamically by checking the
processor SVR value.  Also removed CONFIG_NUM_CPUS references from all
the platforms with 85xx/86xx processors.

This can help to use the same u-boot image across the platforms.

Also revamped and corrected few Freescale Copyright messages.

Signed-off-by: Poonam Aggrwal <poonam.aggrwal@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-08-28 17:12:38 -05:00
Kumar Gala
9af9c6bdc1 86xx: Report which "bank" of NOR flash we are booting from on MPC8641HPCN
The MPC8641HPCN board is capable of swizzling the upper address bit of
the NOR flash we boot out of which creates the concept of "virtual"
banks.  This is useful in that we can flash a test of image of u-boot
and reset to one of the virtual banks while still maintaining a
working image in "bank 0".

The PIXIS FPGA exposes registers on LBC which we can use to determine
which "bank" we are booting out of (as well as setting which bank to
boot out of).

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-07-22 09:08:50 -05:00
Jean-Christophe PLAGNIOL-VILLARD
52cb4d4fb3 stdio/device: rework function naming convention
So far the console API uses the following naming convention:

	======Extract======
	typedef struct device_t;

	int	device_register (device_t * dev);
	int	devices_init (void);
	int	device_deregister(char *devname);
	struct list_head* device_get_list(void);
	device_t* device_get_by_name(char* name);
	device_t* device_clone(device_t *dev);
	=======

which is too generic and confusing.

Instead of using device_XX and device_t we change this
into stdio_XX and stdio_dev

This will also allow to add later a generic device mechanism in order
to have support for multiple devices and driver instances.

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

Edited commit message.

Signed-off-by: Wolfgang Denk <wd@denx.de>
2009-07-18 00:27:46 +02:00
Timur Tabi
890d242fac remove _IO_BASE and KSEG1ADDR from board configuration files
The KSEG1ADDR macro used to be necessary for the RTL8139 Ethernet
driver, but the code that used that macro was removed over a year
ago, so board configuration files no longer need to define it.

The _IO_BASE macro is also automatically defined to 0 if it isn't
already set, so there's no need to define that macro either in the
board configuration files.

Signed-off-by: Timur Tabi <timur@freescale.com>
Acked-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Acked-by: Andy Fleming <afleming@freescale.com>
Acked-by: Andre Schwarz <andre.schwarz@matrix-vision.de>
Acked-by: Kim Phillips <kim.phillips@freescale.com>
2009-07-11 00:19:16 +02:00
Kumar Gala
156984a361 8xxx: Fix PCI bus address setup for 36-bit configs
We want the outbound PCI memory map to end at the 4G boundary so we
can maximize the amount of space available for inbound mappings if
we have large amounts of memory.

This matches the device tree setup in the kernel for the 36-bit physical
configs for the platforms that have one (MPC8641 HPCN & MPC8572 DS).

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-06-30 08:24:22 -05:00
Kumar Gala
7649a590b5 86xx: Cleanup MP support
* Use CONFIG_MP instead of CONFIG_NUM_CPUS to match 85xx
* Introduce determine_mp_bootpg() helper.  We'll need this to address a
  bug introduced in v2009.03 with 86xx MP booting.  We have to make sure
  to reserve the region of memory used for the MP bootpg() so other
  u-boot code doesn't use it.
* Added dummy versions of cpu_reset(), cpu_status() & cpu_release() to
  allow cmd_mp.c to build and work. In the future we should look at
  implementing all these functions. This could be common w/85xx if we
  use spin tables on 86xx.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-04-01 15:29:44 -05:00
Mike Frysinger
bdab39d358 rename CONFIG_CMD_ENV to CONFIG_CMD_SAVEENV
The CONFIG_CMD_ENV option controls enablement of the `saveenv` command
rather than a generic "env" command, or anything else related to the
environment.  So, let's make sure the define is named accordingly.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-02-18 00:47:43 +01:00
Peter Tyser
4ef630df77 86xx: Reset update
Update the 86xx reset sequence to try executing a board-specific reset
function.  If the board-specific reset is not implemented or does not
succeed, then assert #HRESET_REQ.  Using #HRESET_REQ is a more standard
reset procedure than the previous method and allows all board
peripherals to be reset if needed.

Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
2009-02-16 18:05:56 -06:00
Becky Bruce
4c78d4a6c0 mpc8641hpcn: Change PCI MEM pci bus address
Now that the rest of u-boot can support it, change the PCI bus
address of the PCI MEM regions from 0x80000000 to 0xc0000000,
and use the same bus address for both PCI1 and PCI2.  This will
maximize the amount of PCI address space left over to map RAM
on systems with large amounts of memory.

Signed-off-by: Becky Bruce <beckyb@kernel.crashing.org>
2009-02-10 00:31:07 +01:00
Becky Bruce
d591a80e74 MPC8641HPCN: Enable CONFIG_ADDR_MAP
Signed-off-by: Becky Bruce <beckyb@kernel.crashing.org>
2009-02-10 00:31:02 +01:00
Becky Bruce
49f46f3bf0 mpc8641hpcn: Clean up PCI mapping concepts
Clean up PCI mapping concepts in the 8641 config - rename _BASE
to _BUS, as it's actually a PCI bus address, separate virtual
and physical addresses into _VIRT and _PHYS, and use each
appopriately.

Signed-off-by: Becky Bruce <beckyb@kernel.crashing.org>
2009-02-10 00:30:17 +01:00
Becky Bruce
b81b773ead mpc8641hpcn: Use physical address in flash banks defintion
If the VA and PA of the flash aren't the same, the banks list
should be initialized to hold the physical address.  Correct this.

Signed-off-by: Becky Bruce <beckyb@kernel.crashing.org>
2009-02-10 00:26:03 +01:00
Kumar Gala
ea154a1781 FSL: Moved BR_PHYS_ADDR for localbus to common header
The BR_PHYS_ADDR macro is useful on all machines that have local bus
which is pretty much all 83xx/85xx/86xx chips.

Additionally most 85xx & 86xx will need it if they want to support
36-bit physical addresses.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Acked-by: Andy Fleming <afleming@freescale.com>
2008-12-04 03:15:43 -06:00
Jon Loeliger
5a105a333d Removed unused CONFIG_L1_INIT_RAM symbol.
Prevent further viral propogation of the unused
symbol CONFIG_L1_INIT_RAM by just removing it.

Signed-off-by: Jon Loeliger <jdl@freescale.com>
Acked-by: Andy Fleming <afleming@freescale.com>
2008-12-03 22:48:32 -06:00
Becky Bruce
d52082b12c mpc8641: Try to detect old .dts files
Since we've changed the memory map of the board, be nice and
add some checking to try to catch out-of-date .dts files.  We do
this by checking the CCSRBAR location in the .dts and comparing
it to the CCSRBAR location in u-boot.  If they don't match, a
warning msg is printed.  This isn't foolproof, but it's simple and
will catch most of the cases where an out-of-date .dts is present,
including all of the cases where a new u-boot is used with an old
standard MPC8641 .dts file as supplied with Linux.

Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
2008-11-10 10:10:05 -06:00
Becky Bruce
3111d32c49 mpc8641: Support 36-bit physical addressing
This patch creates a memory map with all the devices
in 36-bit physical space, in addition to the 32-bit map.
The CCSR relocation is moved (again, sorry) to
allow for the physical address to be 36 bits - this
requires translation to be enabled.  With 36-bit physical
addressing enabled, we are no longer running with VA=PA
translations.  This means we have to distinguish between
the two in the config file.  The existing region name is
used to indicate the virtual address, and a _PHYS variety
is created to represent the physical address.

Large physical addressing is not enabled by default.
Set CONFIG_PHYS_64BIT in the config file to turn this on.

Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
2008-11-10 10:10:05 -06:00
Becky Bruce
c759a01a00 mpc8641: Change 32-bit memory map
The memory map on the 8641hpcn is modified to look more like
the 85xx boards; this is a step towards a more standardized
layout going forward. As part of this change, we now relocate
the flash.

The regions for some of the mappings were far larger than they
needed to be.  I have reduced the mappings to match the
actual sizes supported by the hardware.

In addition I have removed the comments at the head
of the BAT blocks in the config file, rather than updating
them.  These get horribly out of date, and it's a simple
matter to look at the defines to see what they are set to
since everything is right here in the same file.

Documentation has been changed to reflect the new map, as this
change is user visible, and affects the OS which runs post-uboot.

Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
2008-11-10 10:10:04 -06:00
Becky Bruce
bf9a8c3430 mpc86xx: Change early FLASH mapping to 1M at CONFIG_MONITOR_BASE_EARLY
We define CONFIG_MONITOR_BASE_EARLY to define the initial location
of the bootpage in flash.   Use this to create an early mapping
definition for the FLASH, and change the early_bats code to use this.

This  change facilitates the relocation of the flash since the early
mappings are no longer tied to the final location of the flash.

Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
2008-11-10 10:10:04 -06:00
Becky Bruce
6bf98b1362 mpc8641: make DIAG_ADDR == FLASH_BASE
Currently, that's what it is, but it's hardcoded.

Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
2008-11-10 10:10:03 -06:00
Becky Bruce
170deacb1d mpc8641: Drop imaginary second flash bank, map 8MB
There's a lot of setup and foo for the second flash
bank.  The problem is, this board doesn't actually have one.
Clean this up.  Also, the flash is 8M in size.  Get rid
of the confusing aliased overmapping, and just map 8M.

Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
2008-11-10 10:10:03 -06:00
Becky Bruce
0f2d66027b mpc8641: only define CONFIG_ENV_SIZE once
It's currently defined twice inside in an if/else block, but
both halves set the same value.  Move the define outside
the if.

Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
2008-11-10 10:10:02 -06:00
Becky Bruce
05df3e5a63 mpc8641: Remove extra "0" from BR2 define
Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
2008-11-10 10:10:01 -06:00
Becky Bruce
1266df8877 powerpc: change 86xx SMP boot method
We put the bootpg for the secondary cpus into memory and use
BPTR to get to it.  This is a step towards converting to the
ePAPR boot methodology.  Also, the code is written to
deal properly with more than 4GB of RAM.

Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
2008-11-04 10:58:50 -06:00
Becky Bruce
b543156068 8641HPCN: Config file cleanup
There are several items in the config file that were hardcoded
but that should really be based on other config options, since
the regions are contiguous and depend on being so.  This cleans
that up a bit.  Also, add BR_PHYS_ADDR() macro to convert
addresses into the proper format for BR registers.

Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
2008-11-03 11:05:01 -06:00
Becky Bruce
af5d100e8d mpc8641: Make PCI and RIO mutually exclusive, fix non-PCI build
You can't actually have both, and with some coming changes to
change the memory map for the board and support 36-bit physical,
we need the extra BAT that is being consumed by having both.

I also make non-PCI configs build cleanly, for the sake of sanity.

Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
2008-11-03 11:04:59 -06:00
Becky Bruce
98693b85d4 mpc8641: Stop supporting non-PCI_PNP configs
We don't actually ever do this, remove the code so we
can stop maintaining it.

Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
2008-11-03 11:04:59 -06:00
Dave Liu
1c671977dc 86xx: remove the unused definition
Signed-off-by: Dave Liu <daveliu@freescale.com>
2008-10-30 10:43:52 -05:00
Kumar Gala
c2083e0e11 86xx: Convert all fsl_pci_init users to new APIs
Converted MPC8610HCPD, MPC8641HPCN, and SBC8641D to use
fsl_pci_setup_inbound_windows() and ft_fsl_pci_setup().

With these changes the board code is a bit smaller and we get dma-ranges
set in the device tree for these boards.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Signed-off-by: Andrew Fleming-AFLEMING <afleming@freescale.com>
Acked-by: Jon Loeliger <jdl@freescale.com>
2008-10-24 17:35:48 -05:00
Kumar Gala
8ba93f68a1 86xx: Enable 64-bit PCI resources on all Freescale boards
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Signed-off-by: Andrew Fleming-AFLEMING <afleming@freescale.com>
2008-10-24 17:34:17 -05:00
Jean-Christophe PLAGNIOL-VILLARD
6d0f6bcf33 rename CFG_ macros to CONFIG_SYS
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2008-10-18 21:54:03 +02:00
Jean-Christophe PLAGNIOL-VILLARD
0e8d158664 rename CFG_ENV macros to CONFIG_ENV
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2008-09-10 22:48:06 +02:00
Jean-Christophe PLAGNIOL-VILLARD
5a1aceb068 rename CFG_ENV_IS_IN_FLASH in CONFIG_ENV_IS_IN_FLASH
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2008-09-10 22:48:04 +02:00
Jean-Christophe PLAGNIOL-VILLARD
93f6d72544 rename CFG_ENV_IS_NOWHERE in CONFIG_ENV_IS_NOWHERE
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2008-09-10 22:48:00 +02:00
Jean-Christophe PLAGNIOL-VILLARD
32628c5008 cmd_mac: Move conditional compilation to Makefile
finish remaning CFG_ID_EEPROM in CONFIG_ID_EEPROM
start in commit ad8f8687b7

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2008-09-10 21:09:37 +02:00
Kumar Gala
6a8e569293 FSL DDR: Convert MPC8641HPCN to new DDR code.
Signed-off-by: Jon Loeliger <jdl@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-08-27 02:06:02 +02:00
Jean-Christophe PLAGNIOL-VILLARD
00b1883a4c drivers/mtd: Move conditional compilation to Makefile
rename CFG_FLASH_CFI_DRIVER to CONFIG_FLASH_CFI_DRIVER

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2008-08-13 01:40:42 +02:00
Timur Tabi
e2d31fb345 Update Freescale sys_eeprom.c to handle CCID formats
Update the sys_eeprom.c file to handle both NXID and CCID EEPROM formats.  The
NXID format replaces the older CCID format, but it's important to support both
since most boards out there still use the CCID format.  This change is in
preparation for using one file to handle both formats.  This will also unify
EEPROM support for all Freescale 85xx and 86xx boards.

Also update the 86xx board header files to use the standard CFG_I2C_EEPROM_ADDR
instead of ID_EEPROM_ADDR.

Signed-off-by: Timur Tabi <timur@freescale.com>
2008-07-15 10:59:27 -05:00
Jon Loeliger
1a247ba7fa Merge commit 'wd/master' 2008-06-06 10:48:31 -05:00
Becky Bruce
31d8267224 PPC: Create and use CONFIG_HIGH_BATS
Change all code that conditionally operates on high bat
registers (that is, BATs 4-7) to look at CONFIG_HIGH_BATS
instead of the myriad ways this is done now.  Define the option
for every config for which high bats are supported (and
enabled by early boot, on parts where they're not always
enabled)

Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
2008-06-03 17:48:41 +02:00
Wolfgang Denk
53677ef18e Big white-space cleanup.
This commit gets rid of a huge amount of silly white-space issues.
Especially, all sequences of SPACEs followed by TAB characters get
removed (unless they appear in print statements).

Also remove all embedded "vim:" and "vi:" statements which hide
indentation problems.

Signed-off-by: Wolfgang Denk <wd@denx.de>
2008-05-21 00:14:08 +02:00
Jon Loeliger
2c289e320d mpc86xx: Removed unused and unconfigured memory test code.
Besides, other common code exists.

Signed-off-by: Jon Loeliger <jdl@freescale.com>
2008-05-19 09:47:25 -05:00
Becky Bruce
4f93f8b1a4 86xx: Add reginfo command
Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
2008-01-24 12:12:56 -06:00
Becky Bruce
4933b91f8a 86xx: Support new law setup method and convert mpc8641
Adds the support code in cpu/mpc86xx for the new law setup code
recently created fsl_law.c, and changes the MPC8641HPCN config
to use this code.

Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
2008-01-24 12:12:30 -06:00
Timur Tabi
6bee764bd6 86xx: enable command-line editing
Enable command-line editing for all MPC86xx boards.

Signed-off-by: Timur Tabi <timur@freescale.com>
2008-01-17 12:15:41 -06:00
Jon Loeliger
ad8f8687b7 FSL: Convert board/freescale/common/Makefile to use CONFIG_
Convert the board/freescale/common/Makefile to use
CONFIG_* options to select which files to conditionally
compile into the board/freescale/common library rather
than conditionally compiling entire files.

Now handles::
    CONFIG_FSL_PIXIS
    CONFIG_FSL_DIU_FB
    CONFIG_PQ_MDS_PIB

CONFIG_ID_EEPROM is introduced until CFG_ID_EEPROM is gone.

Signed-off-by: Jon Loeliger <jdl@freescale.com>
2008-01-16 12:05:05 -06:00
Kumar Gala
b009f3eca9 85xx: Remove cache config from configs.h
Either use the standard defines in asm/cache.h or grab the information
at runtime from the L1CFG SPR.

Also, minor cleanup in cache.h to make the code a bit more readable.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-01-09 16:25:04 -06:00
Jon Loeliger
61d3421bde Don't slam #undef DEBUG in the 8641HPCN config file.
Doing so prevents it from being individually set
and useful in other files.

Signed-off-by: Jon Loeliger <jdl@freescale.com>
2008-01-03 10:27:23 -06:00
Jon Loeliger
ea9f7395ec Convert MPC8641HPCN to use libfdt.
Assumes the presence of the aliases node in the DTS to
locate the ethernet, pci and serial nodes for fixups.

Use consistent fdtaddr and fdtfile in environment variables.

Signed-off-by: Jon Loeliger <jdl@freescale.com>
2008-01-03 10:27:03 -06:00
Jason Jin
9f23ca334a Unify pixis_reset altbank across board families
Basically, refactor the CFG_PIXIS_VBOOT_MASK values
into the separate board config files.

Signed-off-by: Jason Jin <Jason.jin@freescale.com>
Signed-off-by: Jon Loeliger <jdl@freescale.com>
2007-11-07 14:08:45 -06:00
Zhang Wei
bbf4796f64 Fix USB support issue for MPC8641HPCN board.
The configuration file has already enabled USB, but it
missed definition of CFG_OHCI_SWAP_REG_ACCESS, the USB
on MPC8641HPCN can not work because of the wrong USB
register endian.

And add the USB command to U-Boot commands list.

Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
2007-11-03 22:15:12 +01:00
Kim Phillips
7608d75f9c support board vendor-common makefiles
if a board/$(VENDOR)/common/Makefile exists, build it.

also add the first such case, board/freescale/common/Makefile, to
handle building board-shared EEPROM, PIXIS, and MDS-PIB code, as
dictated by board configuration.

thusly get rid of alternate build dir errors such as:

FATAL: can't create /work/wd/tmp/u-boot-ppc/board/freescale/mpc8360emds/../common/pq-mds-pib.o: No such file or directory

by putting the common/ mkdir command in its proper place (the common
Makefile). Common bits from existing individual board Makefiles have
been removed.

Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
2007-08-29 02:15:46 +02:00
Kim Phillips
3bb342fc85 fdt: remove unused OF_FLAT_TREE_MAX_SIZE references
and make some minor corrections to the FDT part of the README.

Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
2007-08-29 01:46:25 +02:00
Andy Fleming
10327dc554 Add CONFIG_HAS_ETH0 to all boards with TSEC
The 85xx code now relies on CONFIG_HAS_ETH0 to determine whether
to update TSEC1's device-tree node, so we need to add it
to all the boards with TSECs.  Do this for 83xx and 86xx, too,
since they will eventually do something similar.

Signed-off-by: Andy Fleming <afleming@freescale.com>
2007-08-16 16:35:02 -05:00
Andy Fleming
3a79013e2a Define tsec flag values in config files
The tsec_info structure and array has a "flags" field for each
ethernet controller.  This field is the only reason there are
settings.  Switch to defining TSECn_FLAGS for each controller
in the config header, and we can greatly simplify the array, and
also simplify the addition of future boards.

Signed-off-by: Andy Fleming <afleming@freescale.com>
2007-08-16 12:12:49 +02:00
Markus Klotzbuecher
78549bbf44 Merge with git://www.denx.de/git/u-boot.git 2007-08-07 22:30:29 +02:00
Jason Jin
0f460a1ee1 Configurations for ATI video card BIOS emulator
This patch add definition of the BIOS emulator and the ATI framebuffer
driver for MPC8641HPCN board.

Signed-off-by: Jason Jin <Jason.jin@freescale.com>
Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
2007-08-06 01:44:59 +02:00
Ed Swarthout
63cec5814f Make MPC8641's PCI/PCI-E driver a common driver for many FSL parts.
All of the PCI/PCI-Express driver and initialization code that
was in the MPC8641HPCN port has now been moved into the common
drivers/fsl_pci_init.c.  In a subsequent patch, this will be
utilized by the 85xx ports as well.

Common PCI-E IMMAP register blocks for FSL 85xx/86xx are added.

Also enable the second PCI-Express controller on 8641
by getting its BATS and CFG_ setup right.

Fixed a u16 vendor compiler warning in AHCI driver too.

Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
Signed-off-by: Jon Loeliger <jdl@freescale.com>
2007-08-06 00:22:24 +02:00
Jon Loeliger
659e2f6736 include/configs/[J-O]*: Cleanup BOOTP and lingering CFG_CMD_*.
Explicitly add in default CONFIG_BOOTP_* options where cmd_confdefs.h
used to be included but CONFIG_BOOTP_MASK was not defined.

Remove lingering references to CFG_CMD_* symbols.

Signed-off-by: Jon Loeliger <jdl@freescale.com>
2007-07-10 09:10:49 -05:00
Jon Loeliger
2f9c19e496 configs/ mpc86xx: Rewrite command line options using new CONFIG_CMD-* style.
Signed-off-by: Jon Loeliger <jdl@freescale.com>
2007-07-04 00:35:26 +02:00
Wolfgang Denk
98c440bee6 Merge with /home/wd/git/u-boot/custodian/u-boot-testing 2007-07-03 15:07:56 +02:00
Zhang Wei
a81d1c0b85 Add USB PCI-OHCI, USB keyboard and event poll support to the
MPC8641HPCN board config file.

Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
2007-06-06 10:08:14 +02:00
Ed Swarthout
32922cdc47 mpc8641 image size cleanup
e600 does not have a bootpg restriction.
Move the version string to beginning of image at fff00000.
Resetvec.S is not needed.
Update flash copy instructions.
Add tftpflash env variable

Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
Signed-off-by: Jon Loeliger <jdl@freescale.com>
2007-06-05 13:27:34 -05:00
Kim Phillips
255a3577c8 Reduce CONFIG_MPC8YXX_TSECx to CONFIG_TSECx
For all practical u-boot purposes, TSECs don't differ throughout the
mpc8[356]xx families; reduce CONFIG_MPC8YXX_TSECx to CONFIG_TSECx.

Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
2007-05-17 00:07:21 +02:00
Jason Jin
5a58a73ceb Add flash cmd function to 8641HPCN ramboot
Also fixes some commmand for 8641 HPCN ramboot case.

Signed-off-by: Jason Jin <jason.jin@freescale.com>
Signed-off-by: Jon Loeliger <jdl@freescale.com>
2007-03-22 11:02:34 -05:00
Jon Loeliger
2047672684 Converted all 85xx boards to use a common FSL I2C driver.
Introduced COFIG_FSL_I2C to select the common FSL I2C driver.
And removed hard i2c path from a few u-boot.lds scipts too.
Minor whitespace cleanups along the way.

Signed-off-by: Jon Loeliger <jdl@freescale.com>
2006-10-20 15:50:15 -05:00
Jon Loeliger
7237c033b0 Moved i2c driver out of cpu/mpc86xx/i2c.c into drivers/fsl_i2c.c
in an effort to begin to unify the umpteen FSL I2C drivers that
are all otherwise very similar.

Signed-off-by: Jon Loeliger <jdl@freescale.com>
2006-10-19 11:34:11 -05:00