Commit graph

11513 commits

Author SHA1 Message Date
Simon Glass
4bba9d3f77 dm: Move CONFIG_I2C_COMPAT to Kconfig
Make this option available in Kconfig and clean up the board that uses it.
Note there is also an entry in exynos5-common.h but this affects multiple
boards and should be dropped as part of the Samsung I2C migration to
driver model.

Signed-off-by: Simon Glass <sjg@chromium.org>
2015-02-19 06:19:18 -07:00
Simon Glass
6fb9ac15eb dm: cros_ec: Convert to Kconfig
Since both I2C and SPI are converted to Kconfig, we can convert cros_ec
to Kconfig for these buses.

LPC will need to wait until driver mode PCI is available.

Signed-off-by: Simon Glass <sjg@chromium.org>
2015-02-19 06:19:18 -07:00
Tom Rini
1320112c8a Merge branch 'master' of git://git.denx.de/u-boot-fdt 2015-02-18 08:46:50 -05:00
Joe Hershberger
90fbee3e40 cmd_fdt: Actually fix fdt command in sandbox
Commit 90bac29a76 claims to fix this bug
that was introduced in commit a92fd6577e
but doesn't actually make the change that the commit message describes.

Actually fix the bug this time.

Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
Acked-by: Simon Glass <sjg@chromium.org>
2015-02-17 20:19:16 -07:00
Tom Rini
9ec84f103b Merge branch 'master' of git://git.denx.de/u-boot-avr32 2015-02-17 22:11:36 -05:00
Andreas Bießmann
5c98d7ffb0 atstk1002: enable generic board
Signed-off-by: Andreas Bießmann <andreas.devel@googlemail.com>
2015-02-17 22:54:41 +01:00
Andreas Bießmann
573feec8a4 grasshopper: enable generic board
Signed-off-by: Andreas Bießmann <andreas.devel@googlemail.com>
2015-02-17 22:54:39 +01:00
Andreas Bießmann
a752a8b4c4 avr32: add generic board support
Signed-off-by: Andreas Bießmann <andreas.devel@googlemail.com>
2015-02-17 22:54:38 +01:00
Andreas Bießmann
68145d4c7b common/board_f: factor out reserve_stacks
Introduce arch_reserve_stacks() to tailor gd->start_addr_sp and gd->irq_sp to
the architecture needs.

Signed-off-by: Andreas Bießmann <andreas.devel@googlemail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2015-02-17 22:52:42 +01:00
Andreas Bießmann
dbdb5abd07 avr32: use dlmalloc for DMA buffers
Signed-off-by: Andreas Bießmann <andreas.devel@googlemail.com>
2015-02-17 22:52:39 +01:00
Tom Rini
5290ab876e Revert "sunxi: configs/sunxi-common.h: Enable CONFIG_CMD_PART"
This reverts commit bd2a4888b1 which was
an older version of af21f2f which is what we actually want in.

Signed-off-by: Tom Rini <trini@ti.com>
2015-02-17 10:29:07 -05:00
Tom Rini
a851604ca3 Merge branch 'master' of http://git.denx.de/u-boot-sunxi 2015-02-17 06:27:44 -05:00
Christian Gmeiner
fb2589b330 ot1200: add eeprom command to non-SPL build
Signed-off-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Acked-by: Stefano Babic <sbabic@denx.de>
2015-02-17 10:42:54 +01:00
Valentin Longchamp
2973b098ba 82xx/km82xx: read the IVM eeprom earlier
This allows to define the ethaddr env variable according to the the IVM
content by reading the IVM in misc_init_r.

Later, when HUSH is available the content read earlier is analyzed to
populate some non env variables.

Signed-off-by: Valentin Longchamp <valentin.longchamp@keymile.com>
2015-02-16 15:48:35 -05:00
Simon Glass
942cb0b6a2 sunxi: Normalise FEL support
Make sunxi's FEL code fit with the normal U-Boot boot sequence instead of
creating its own. There are some #ifdefs required in start.S. Future work
will hopefully remove these.

This series is available at u-boot-dm, branch sunxi-working.

Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2015-02-16 20:15:09 +01:00
Hans de Goede
5633a296eb sunxi: video: Do not use CONFIG_SYS_MEM_TOP_HIDE for the framebuffer
Do not use CONFIG_SYS_MEM_TOP_HIDE for the framebuffer, instead override
board_get_usable_ram_top to make sure that u-boot is not relocated into the
area where we want to use the framebuffer, and patch the devicetree from
sunxi_simplefb_setup() to tell the kernel to not touch the framebuffer.

This makes u-boot properly see the framebuffer as dram, and initalize the
level 2 cache for it, fixing the very slow cfb scrolling problem.

As an added bonus this stops us from reserving the framebuffer when simplefb
is not used because an older kernel is booted, or hdp is used and no hdmi
cable was plugged in, freeing up the memory for kernel use in these cases.

Reported-by: Siarhei Siamashka <siarhei.siamashka@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Ian Campbell <ijc@hellion.org.uk>
2015-02-16 19:40:59 +01:00
Hans de Goede
af21f2fb6f config_distro_bootcmd.h: Enable CONFIG_CMD_PART
The recent changes to config_distro_bootcmd.h require CONFIG_CMD_PART to be
defined, as the default bootcmd now uses the "part" command.

This fixes sunxi boards not booting with v2015.04-rc1.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Stephen Warren <swarren@nvidia.com>
2015-02-16 12:41:41 -05:00
Tom Rini
5745f8c4fd Merge git://git.denx.de/u-boot-marvell 2015-02-16 08:44:03 -05:00
Tom Rini
757566d156 Merge git://git.denx.de/u-boot-dm 2015-02-13 13:11:09 -05:00
Tom Rini
921ed4e840 Merge branch 'rmobile' of git://git.denx.de/u-boot-sh 2015-02-13 13:10:25 -05:00
Simon Glass
b1f6659c42 dm: mx6: sabre: Move driver model CONFIGs to Kconfig
Remove driver model CONFIGs from the board config headers and use Kconfig
instead.

Signed-off-by: Simon Glass <sjg@chromium.org>
2015-02-13 07:20:00 -07:00
Simon Glass
1ae067952d dm: stv0991: Move driver model CONFIGs to Kconfig
Remove driver model CONFIGs from the board config headers and use Kconfig
instead.

Signed-off-by: Simon Glass <sjg@chromium.org>
2015-02-13 07:19:55 -07:00
Stefano Babic
e72d344386 Merge branch 'master' of git://git.denx.de/u-boot 2015-02-13 11:17:01 +01:00
Vladimir Barinov
3b7f0e109c arm: rmobile: Add SILK board support
SILK is an entry level development board based on R-Car E2 SoC (R8A7794)

This commit supports the following peripherals:
- SCIF, I2C, Ethernet, QSPI, MMC, USB Host

Signed-off-by: Vladimir Barinov <vladimir.barinov@cogentembedded.com>
Reviewed-by: Tom Rini <trini@ti.com>
Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2015-02-13 13:14:56 +09:00
Peng Fan
c9cac3f841 dm: introduce dev_get_addr interface
Abstracting dev_get_addr can improve drivers that want to
get device's address.

Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
Acked-by: Igor Grinberg <grinberg@compulab.co.il>
Acked-by: Simon Glass <sjg@chromium.org>
2015-02-12 15:17:29 -07:00
Simon Glass
be9891c52d dm: Drop unused driver model config_defaults
These are now in Kconfig so we can drop them from the header file.

Signed-off-by: Simon Glass <sjg@chromium.org>
2015-02-12 15:17:28 -07:00
Simon Glass
b724bd7d63 dm: Kconfig: Move CONFIG_SYS_MALLOC_F_LEN to Kconfig
Move this option to Kconfig and update all boards.
Signed-off-by: Simon Glass <sjg@chromium.org>
2015-02-12 15:17:28 -07:00
Simon Glass
ad885e4570 dm: at91: snapper: Move driver model CONFIGs to Kconfig
Remove driver model CONFIGs from the board config headers and use Kconfig
instead.

Signed-off-by: Simon Glass <sjg@chromium.org>
2015-02-12 15:17:28 -07:00
Nobuhiro Iwamatsu
59088e4a76 dm: sh: serial: Add support driver model
This adds driver model support with this driver. This was tested by Koelsch
board and Gose board.

Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com>
Acked-by: Simon Glass <sjg@chromium.org>
2015-02-12 15:17:17 -07:00
Simon Glass
0f36f957f4 dm: socfpga: Move driver model CONFIGs to Kconfig
Remove driver model CONFIGs from the board config headers and use Kconfig
instead.

Signed-off-by: Simon Glass <sjg@chromium.org>
2015-02-12 10:35:35 -07:00
Simon Glass
70c45aeb43 dm: mx6: Move driver model CONFIGs to Kconfig
Remove driver model CONFIGs from the board config headers and use Kconfig
instead.

Signed-off-by: Simon Glass <sjg@chromium.org>
2015-02-12 10:35:35 -07:00
Simon Glass
7b051c5235 dm: sunxi: Move driver model CONFIGs to Kconfig
Remove driver model CONFIGs from the board config headers and use Kconfig
instead.

Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: Ian Campbell <ijc@hellion.org.uk>
2015-02-12 10:35:35 -07:00
Simon Glass
f4aae59fdf dm: sandbox: Move driver model CONFIGs to Kconfig
Remove driver model CONFIGs from the board config headers and use Kconfig
instead.

Signed-off-by: Simon Glass <sjg@chromium.org>
2015-02-12 10:35:35 -07:00
Simon Glass
001646c478 dm: omap3: Move driver model CONFIGs to Kconfig
Remove driver model CONFIGs from the board config headers and use Kconfig
instead.

Signed-off-by: Simon Glass <sjg@chromium.org>
2015-02-12 10:35:35 -07:00
Simon Glass
d7a4b2e42e dm: tegra: Move driver model CONFIGs to Kconfig
Remove driver model CONFIGs from the board config headers and use Kconfig
instead.

Signed-off-by: Simon Glass <sjg@chromium.org>
2015-02-12 10:35:34 -07:00
Simon Glass
9a89d50d8e dm: x86: Move driver model CONFIGs to Kconfig
Remove driver model CONFIGs from the board config headers and use Kconfig
instead.

Signed-off-by: Simon Glass <sjg@chromium.org>
2015-02-12 10:35:34 -07:00
Simon Glass
aab7e80d5f dm: exynos: Move driver model CONFIGs to Kconfig
Remove driver model CONFIGs from the board config headers and use Kconfig
instead.

Signed-off-by: Simon Glass <sjg@chromium.org>
2015-02-12 10:35:34 -07:00
Simon Glass
34e609ca82 dm: Move Raspberry Pi driver model CONFIGs to Kconfig
Remove driver model CONFIGs from the board config header and use Kconfig
instead.

Signed-off-by: Simon Glass <sjg@chromium.org>
2015-02-12 10:35:34 -07:00
Simon Glass
f058f154a9 dm: Add CMD_DM and CMD_DEMO to Kconfig
Add Kconfig settings for these two options.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
2015-02-12 10:35:34 -07:00
Simon Glass
91a91ff804 dm: Add Kconfig options for driver model SPL support
The SPL support cannot be enabled yet, but we can add the Kconfig
options in preparation for this.

Signed-off-by: Simon Glass <sjg@chromium.org>
2015-02-12 10:35:33 -07:00
Simon Glass
fffff7268b dm: i2c: Make API accessible even without CONFIG_DM
Make the driver model I2C API available always, even if driver model
is not enabled. This allows for a 'soft' switch-over, where drivers can
use the new structures in code which is compiled but not yet used. This
makes migration easier in some cases.

Fix up the existing drivers which define their own 'struct i2c_msg'.

Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: Heiko Schocher <hs@denx.de>
2015-02-12 10:35:33 -07:00
Simon Glass
ca88b9b939 dm: i2c: Add a dm_ prefix to driver model bus speed functions
As with i2c_read() and i2c_write(), add a dm_ prefix to the driver model
versions of these functions to avoid conflicts.

Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: Heiko Schocher <hs@denx.de>
2015-02-12 10:35:33 -07:00
Simon Glass
0da0fcd51f net: Use new checksum functions
Drop the old checksum functions in favour of the new ones.

Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2015-02-12 10:35:33 -07:00
Simon Glass
0e7806d24a ppc: amcc: Omit unneeded ns16550 CONFIG if using driver model
This comes from the device tree or a call to get_uart_clock().

Signed-off-by: Simon Glass <sjg@chromium.org>
2015-02-12 10:35:31 -07:00
Simon Glass
1d60f2b986 powerpc: ppc4xx: canyonlands: Move to generic board
Switch to generic board so that this board will not be broken/removed.

Signed-off-by: Simon Glass <sjg@chromium.org>
2015-02-12 10:35:30 -07:00
Simon Glass
6566041c0b powerpc: ppc4xx: Move CANYONLANDS/GLACIER/ARCHES to Kconfig
Move these options to Kconfig and remove them from the CONFIG files.

Signed-off-by: Simon Glass <sjg@chromium.org>
2015-02-12 10:35:30 -07:00
Simon Glass
0bca284b17 powerpc: ppc4xx: canyonlands: config: Tidy up CONFIGs and config.mk
Many CONFIG options have an unnecessary value of 1. CONFIG_440 is set in
the various board config files. Also simplify the CONFIG_440 check in
config.mk

Signed-off-by: Simon Glass <sjg@chromium.org>
2015-02-12 10:35:30 -07:00
Michael Walle
4fe49d7bec lsxl: switch from bootm to bootz for boot commands
Use the bootz command to load zImages in case of any new boot scripts. Only
the legacy one will still use bootm. Apart form the fact, that this will
simplify the image generation process, it saves one copy of the kernel
image: Common practice is to generate an uImage with a loading address of
0x8000. This uImage contains a compressed zImage, which will unpack the
kernel image to the beginning of the RAM. But because there is already the
compressed image the uncompressor first relocates the compressed image to a
higher location. The load address is encoded into the uImage which is
generated by the distributions and thus cannot be easily changed. By using
the bootz command we can load the compressed image to a higher memory
address and the decompressor doesn't have to reloacte the image.

Signed-off-by: Michael Walle <michael@walle.cc>
2015-02-12 15:28:02 +01:00
Michael Walle
145df6fe2a lsxl: place the dtb below the inital ramdisk
The dtb was loaded at a memory address after the initial ramdisk. Thus a
large ramdisk would overwrite the dtb. Move it to "ramdisk_start - 64k".
64k should be enough for the device tree blob. Also the kernel
documentation arm/Booting suggests to put the dtb before the initial
ramdisk.

Signed-off-by: Michael Walle <michael@walle.cc>
2015-02-12 15:28:02 +01:00
Michael Walle
bc2ad9f04d lsxl: use default load addresses for legacy boot
The load addresses for the bootcmd_legacy script were taken from the
original bootloader from Buffalo. But newer kernels are too big and the
uncompressing will overwrite parts of the initial ramdisk. Therefore,
we switch to the load addresses which are also used by the other boot
script.

Signed-off-by: Michael Walle <michael@walle.cc>
2015-02-12 15:28:02 +01:00
Hans de Goede
bd2a4888b1 sunxi: configs/sunxi-common.h: Enable CONFIG_CMD_PART
The recent changes to config_distro_bootcmd.h require CONFIG_CMD_PART to be
defined, as the default bootcmd not uses the "part" command.

This fixes sunxi boards not booting with v2015.04-rc1.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2015-02-11 19:43:45 -05:00
Hans de Goede
478b02f1a7 Add linux/compiler-gcc5.h to fix builds with gcc5
Add linux/compiler-gcc5/h from the kernel sources at:

commit 5631b8fba640a4ab2f8a954f63a603fa34eda96b
Author: Steven Noonan <steven@uplinklabs.net>
Date:   Sat Oct 25 15:09:42 2014 -0700

    compiler/gcc4+: Remove inaccurate comment about 'asm goto' miscompiles

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2015-02-11 19:43:45 -05:00
Stefano Babic
a4f7d09831 pmic: fix missing SWITCH_SIZE
Applying ccbb18713b,
the define disappeared. Fix it.

Signed-off-by: Stefano Babic <sbabic@denx.de>
2015-02-11 12:35:46 +01:00
Tom Rini
db7a7dee68 Merge branch 'master' of git://git.denx.de/u-boot-x86 2015-02-10 10:42:56 -05:00
Tom Rini
c956662cc3 Merge branch 'master' of git://git.denx.de/u-boot-atmel 2015-02-10 10:42:22 -05:00
Tom Rini
0dac731d19 Merge branch 'master' of git://git.denx.de/u-boot-video
Conflicts:
	include/splash.h

Signed-off-by: Tom Rini <trini@ti.com>
2015-02-10 10:41:54 -05:00
Tom Rini
307367eaff Merge branch 'master' of git://www.denx.de/git/u-boot-imx 2015-02-10 10:40:43 -05:00
Nikita Kiryanov
7bf71d1f55 lcd: split splash code into its own function
lcd_logo() currently performs tasks well beyond just displaying the logo.
It has code which displays splash image, it has logic which determines
when the different display features are displayed, and it is coupled with
the lcd console because it holds the responsibility of returning the
lcd console base address.

Make lcd_logo() just about the logo by:
* Moving splash image display code into a dedicated function
* Moving the logic regarding when various features are displayed to
  lcd_clear() (which is arguably not the correct name for housing such
  code either, but it is currently the most fitting location code wise)
* Move the responsibility of setting the console base address to
  lcd_clear() too.

Signed-off-by: Nikita Kiryanov <nikita@compulab.co.il>
Reviewed-by: Simon Glass <sjg@chromium.org>
Tested-by: Bo Shen <voice.shen@atmel.com>
Tested-by: Josh Wu <josh.wu@atmel.com>
Cc: Bo Shen <voice.shen@atmel.com>
Cc: Simon Glass <sjg@chromium.org>
Cc: Anatolij Gustschin <agust@denx.de>
2015-02-10 13:31:58 +01:00
Nikita Kiryanov
033167c4c5 lcd: dt: extract simplefb support
We now have api functions that can support compiling simplefb code as its own
module. Since this code is not part of the display functionality, extract it
to its own file.

Raspberry Pi is updated to accommodate the changes.

Signed-off-by: Nikita Kiryanov <nikita@compulab.co.il>
Acked-by: Stephen Warren <swarren@wwwdotorg.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
Tested-by: Bo Shen <voice.shen@atmel.com>
Tested-by: Josh Wu <josh.wu@atmel.com>
Cc: Simon Glass <sjg@chromium.org>
Cc: Anatolij Gustschin <agust@denx.de>
Cc: Stephen Warren <swarren@wwwdotorg.org>
2015-02-10 13:31:26 +01:00
Nikita Kiryanov
c8d2febcc7 lcd: various cleanups
This cleanup mostly focuses on removing unnecessary whitespace and comments
which are superfluous and/or do not conform to the coding style.

Signed-off-by: Nikita Kiryanov <nikita@compulab.co.il>
Reviewed-by: Simon Glass <sjg@chromium.org>
Tested-by: Bo Shen <voice.shen@atmel.com>
Tested-by: Josh Wu <josh.wu@atmel.com>
Cc: Simon Glass <sjg@chromium.org>
Cc: Anatolij Gustschin <agust@denx.de>
2015-02-10 13:30:20 +01:00
Nikita Kiryanov
38b550877f lcd: split configuration_get_cmap
configuration_get_cmap() is multiple platform-specific functions stuffed into
one function. Split it into multiple versions, and move each version to the
appropriate driver to reduce the #ifdef complexity.

Signed-off-by: Nikita Kiryanov <nikita@compulab.co.il>
Reviewed-by: Simon Glass <sjg@chromium.org>
Tested-by: Bo Shen <voice.shen@atmel.com>
Tested-by: Josh Wu <josh.wu@atmel.com>
Cc: Bo Shen <voice.shen@atmel.com>
Cc: Simon Glass <sjg@chromium.org>
Cc: Anatolij Gustschin <agust@denx.de>
2015-02-10 13:25:08 +01:00
Nikita Kiryanov
baaa7dd706 lcd: move platform-specific structs to their own headers
common/lcd code is full of platform-specific code and definitions, which
ideally should reside with the respective driver code. Take a step towards that
goal by moving platform-specific structs from lcd.h to their own header files.

The structs for the generic case (the #else for all the platform-specific
cases) is retained in lcd.h as the default case.

Signed-off-by: Nikita Kiryanov <nikita@compulab.co.il>
Reviewed-by: Simon Glass <sjg@chromium.org>
Tested-by: Bo Shen <voice.shen@atmel.com>
Tested-by: Josh Wu <josh.wu@atmel.com>
Cc: Bo Shen <voice.shen@atmel.com>
Cc: Simon Glass <sjg@chromium.org>
Cc: Anatolij Gustschin <agust@denx.de>
2015-02-10 13:24:10 +01:00
Peng Fan
ccbb18713b pmic:pfuz100 add switch mode and more registers
Add more pfuze register offset.
And switch mode definition.

Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
2015-02-10 12:48:49 +01:00
Peng Fan
ee52f1a5fe pmic:pfuze add macro for setting voltage
"#define PFUZE100_SW1ABC_SETP(x) ((x - 3000) / 250)"
This macro is for configuring SW1A/B/C Output Voltage easily.

Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
2015-02-10 12:48:48 +01:00
Tom Rini
a4fb5df214 Merge branch 'microblaze' of git://git.denx.de/u-boot-microblaze 2015-02-09 11:44:46 -05:00
Tom Rini
10918c03a9 Merge git://git.denx.de/u-boot-arc 2015-02-09 10:25:20 -05:00
Michal Simek
ca7d22662e microblaze: spl: Do not call mem_malloc_init and use early alloc
This patch has some parts connected together:
- Use _gd in bss section which is automatically cleared
  Location at SPL_MALLOC_END wasn't cleared at all
- Use MALLOC_F_LEN(early alloc) instead of FULL MALLOC
  (mem_malloc_init is not called at all)
- Simplify malloc and stack init.
  At the end of SPL addr is malloc area and below is stack

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2015-02-09 15:13:12 +01:00
Michal Simek
405e651d70 microblaze: Add support for CONFIG_SYS_MALLOC_F_LEN
Create space for dm_init where calloc is called
and malloc_base has to be initialized.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2015-02-09 15:13:12 +01:00
Michal Simek
e945f6dc28 microblaze: Move architecture to use generic board init
Compile code with -fPIC to get GOT. Do not build SPL
with fPIC because it increasing SPL size for nothing.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2015-02-09 15:11:56 +01:00
Michal Simek
4dd097427a microblaze: Enable SPL_NOR support when FLASH_BASE is setup
Simplify SPL NOR init.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2015-02-09 15:09:58 +01:00
Michal Simek
0267ba5d86 common: Move dram_init() declaration to common location
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2015-02-09 15:08:48 +01:00
Alexey Brodkin
836d2cc2ee arc: move SYS_MONITOR_BASE setup in Konfig
Following SPARK ARC now has SYS_MONITOR_BASE setup via Kconfig.
This makes "include/configs/*.h" cleaner and more flexible.

Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
2015-02-09 16:41:20 +03:00
Alexey Brodkin
a1dbe57d2d arc: hard-code CONFIG_ARCH_EARLY_INIT_R in asm/config.h
Common arch_early_init_r() is used in "arc/lib/cpu.c" for all ARC boards
so there's no sense in separate per-board definitions.

Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
2015-02-09 16:41:20 +03:00
Alexey Brodkin
bcba9742ce arc: get rid of useless CONFIG_SKIP_LOWLEVEL_INIT
Currently there's nothing related to really low-level init on ARC so
CONFIG_SKIP_LOWLEVEL_INIT definition makes no sense.

Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
2015-02-09 16:41:20 +03:00
Alexey Brodkin
6eb651ad29 arc: hard-code CONFIG_SYS_GENERIC_BOARD into asm/config.h
There're no other options for ARC except "generic board" so ther's no
point to define CONFIG_SYS_GENERIC_BOARD per board.

We now have it set fo all ARC boards.

Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
2015-02-09 16:41:20 +03:00
Alexey Brodkin
1f9ad44546 arc: add selection of endianess in Kconfig
This change allows to keep board description clean and minimalistic.
This is especially helpful if one board may house different CPUs with
different features.

It is applicable to both FPGA-based boards or those that have CPUs
mounted on interchnagable daughter-boards.

Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
2015-02-09 16:41:20 +03:00
Alexey Brodkin
205e7a7b77 arc: select cache settings via menuconfig
This change allows to keep board description clean and minimalistic.
This is especially helpful if one board may house different CPUs with
different features.

It is applicable to both FPGA-based boards or those that have CPUs
mounted on interchnagable daughter-boards.

Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
2015-02-09 16:41:20 +03:00
Alexey Brodkin
812980bdd6 arc: add more flavours of ARC700 series CPU
Now we may select a particular version of ARC700:
 * ARC750D or
 * ARC770D

It allows more flexible (or more fine tuned) configuration of U-Boot.
Before that change we relied on minimal configuration but now we may
use specific features of each CPU.

Moreover allows us to escape manual selection of options that
exist in both CPUs but may have say different version like MMUv2 in
ARC750D vs MMUv3 in ARC770D.

Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
2015-02-09 16:41:20 +03:00
Alexey Brodkin
832325c18d arc: remove CPU hard-coded selection from board description in include/configs
With switch to Kconfig we only need very board-specific descriptions in
include/configs.

CPU selection is performed with either defconfig or manually via
menuconfig.

Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
2015-02-09 16:41:20 +03:00
Heiko Schocher
657006a1c4 arm, at91: taurus remove MACH_TYPE definitions in config file
remove MACH_TYPE definitions in config file, as they come from
the defconfig.

Signed-off-by: Heiko Schocher <hs@denx.de>
2015-02-07 23:43:24 +01:00
Heiko Schocher
f624162f95 arm, at91, taurus: enable WDT
enable WDT for the taurus board.

Signed-off-by: Heiko Schocher <hs@denx.de>
2015-02-07 23:43:21 +01:00
Wu, Josh
26961772ff ARM: at91: at91sam9x5: save environment to a FAT file in MMC card
This patch will save U-Boot environment as a file: uboot.env, in FAT partition
instead of saving it in raw sector of MMC card.

This make us easier to manage the environment file.

Signed-off-by: Josh Wu <josh.wu@atmel.com>
Acked-by: Bo Shen <voice.shen@atmel.com>
2015-02-07 23:43:02 +01:00
Wu, Josh
a248558ae2 ARM: at91: sama5d3xek: save enviroment as a FAT file in MMC card
This patch will save U-Boot environment as a file: uboot.env, in FAT partition
instead of in raw sector of MMC card.

This make us easier to manage the environment file.

Signed-off-by: Josh Wu <josh.wu@atmel.com>
Acked-by: Bo Shen <voice.shen@atmel.com>
2015-02-07 23:43:00 +01:00
Wu, Josh
c3814406b0 ARM: at91: sama5d3_xplained: save environment in a FAT file in MMC card
This patch will save U-Boot environment as a file: uboot.env, in FAT partition
instead of saving it in raw sector of MMC card.

This make us easier to manage the environment file.

Signed-off-by: Josh Wu <josh.wu@atmel.com>
Acked-by: Bo Shen <voice.shen@atmel.com>
2015-02-07 23:42:59 +01:00
Wu, Josh
f5702d7d7f ARM: at91: mmc portA support is only for at91sam9g20ek_2mmc board
Current the MMC support will enable MCI port A, Which is only exist
for 2mmc board.
So by default we need to disable MMC (port A) support. And only enable
it for 2mmc board. Otherwise, dataflash won't work in at91sam9260ek board
as MMC has confliction with Dataflash in the CLK pin.

Signed-off-by: Josh Wu <josh.wu@atmel.com>
2015-02-07 23:42:58 +01:00
Bo Shen
0b2a982420 ARM: atmel: sama5d4_xplained: enable spl support
Signed-off-by: Bo Shen <voice.shen@atmel.com>
2015-02-07 23:42:55 +01:00
Bo Shen
5a4c9c2287 ARM: atmel: sama5d4ek: enable SPL support
The sama5d4ek support boot up from NAND flash, SD/MMC card and
also the SPI flash.

Signed-off-by: Bo Shen <voice.shen@atmel.com>
2015-02-07 23:42:53 +01:00
Bin Meng
1b15fac15d bootstage: Fix typos in the comment
There are two typos in the comment block in bootstage.h, fix them.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Acked-by: Simon Glass <sjg@chromium.org>
2015-02-06 12:07:46 -07:00
Bin Meng
6df7ffea13 x86: Add SD/MMC support to quark/galileo
Intel Galileo board has a microSD slot which is routed from Quark SoC
SDIO controller. Enable SD/MMC support so that we can use an SD card.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Acked-by: Simon Glass <sjg@chromium.org>
2015-02-06 12:07:45 -07:00
Bin Meng
38fc1cdae0 x86: pci: Add pci ids for Quark SoC
Add pci ids for Intel Quark SoC.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Acked-by: Simon Glass <sjg@chromium.org>
2015-02-06 12:07:45 -07:00
Bin Meng
b1420c8130 dt-bindings: Add Intel Quark MRC bindings
Add standard dt-bindings macros to be used by Intel Quark MRC node.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Acked-by: Simon Glass <sjg@chromium.org>
2015-02-06 12:07:44 -07:00
Bin Meng
c89ada017f fdtdec: Add compatible id and string for Intel Quark MRC
Add COMPAT_INTEL_QRK_MRC and "intel,quark-mrc" so that fdtdec can
decode Intel Quark MRC node.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Acked-by: Simon Glass <sjg@chromium.org>
2015-02-06 12:07:43 -07:00
Bin Meng
afee3fb8c8 x86: Add basic Intel Galileo board support
New board/intel/galileo board directory with minimum codes, plus
board dts, defconfig and configuration files.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Acked-by: Simon Glass <sjg@chromium.org>
2015-02-06 12:07:41 -07:00
Bin Meng
7df546a653 x86: Remove CONFIG_SATA_INTEL from x86-common.h
CONFIG_SATA_INTEL is not referenced anywhere, so remove it.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Acked-by: Simon Glass <sjg@chromium.org>
2015-02-06 12:07:40 -07:00
Simon Glass
3a1a18ff18 x86: Add support for Intel Minnowboard Max
This is a relatively low-cost x86 board in a small form factor. The main
peripherals are uSD, USB, HDMI, Ethernet and SATA. It uses an Atom 3800
series CPU. So far only the dual core 2GB variant is supported.

This uses the existing FSP support. Binary blobs are required to make this
board work. The microcode update is included as a patch (all 3000 lines of
it).

Change-Id: I0088c47fe87cf08ae635b343d32c332269062156
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2015-02-06 12:07:39 -07:00
Simon Glass
8b4d659f4b x86: Enable bootstage features
Allow measuring of boot time using bootstage.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Tested-by: Bin Meng <bmeng.cn@gmail.com>
2015-02-06 12:07:39 -07:00
Simon Glass
abbdb26257 scsi: bootstage: Measure time taken to scan the bus
On some hardware this time can be significant. Add bootstage support for
measuring this. The result can be obtained using 'bootstage report' or
passed on to the Linux via the device tree.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2015-02-06 12:07:38 -07:00
Simon Glass
91785f70b9 x86: mmc: Move common FSP functions into a common file
Since these board functions seem to be the same for all boards which use
FSP, move them into a common file. We can adjust this later if future FSPs
need more flexibility.

This creates a generic PCI MMC device.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Tested-by: Bin Meng <bmeng.cn@gmail.com>
2015-02-06 12:07:36 -07:00
Tom Rini
5c123f5fbf Merge git://git.denx.de/u-boot-marvell 2015-02-06 12:02:59 -05:00
Stefan Roese
68102b81e8 arm: mvebu: maxbcm: Fix compilation warning and add Spansion SPI NOR support
This patch fixes the following compilation warning for maxbcm:

Building maxbcm board...
   text    data     bss     dec     hex filename
 160075    6596   38240  204911   3206f ./u-boot
board/maxbcm/maxbcm.c: In function 'reset_phy':
board/maxbcm/maxbcm.c:68:6: warning: unused variable 'reg' [-Wunused-variable]
  u16 reg;
      ^
board/maxbcm/maxbcm.c:66:6: warning: unused variable 'devadr' [-Wunused-variable]
  u16 devadr = CONFIG_PHY_BASE_ADDR;
      ^

Additionally support Spansion SPI NOR flash is added. With larger SPI device
support via the CONFIG_SPI_FLASH_BAR define.

Signed-off-by: Stefan Roese <sr@denx.de>
Reviewed-by: Luka Perkov <luka.perkov@sartura.hr>
2015-02-06 17:25:08 +01:00
Stefan Roese
2554167cc1 arm: db-mv784mp-gp: Enable SPL to include DDR training code into U-Boot
This patch adds SPL support to the db-mv784mp-gp eval board.

Signed-off-by: Stefan Roese <sr@denx.de>
Reviewed-by: Luka Perkov <luka.perkov@sartura.hr>
2015-02-06 17:24:46 +01:00
Stefan Roese
e7778ec153 arm: maxbcm: Enable SPL to include DDR training code into U-Boot
This patch adds SPL support to the maxbcm MV78460 based board. Including
the fixed DDR configuratrion needed for the DDR training code. And the
the serdes PHY init code.

Signed-off-by: Stefan Roese <sr@denx.de>
Reviewed-by: Luka Perkov <luka.perkov@sartura.hr>
2015-02-06 17:24:43 +01:00
DrEagle
9a5e0a7d5b kirkwood: sheevaplug: add FDT support
LIBFDT feature is required to support new kernels.

Signed-off-by: Gérald Kerma <drEagle@doukki.net>
Reviewed-by: Luka Perkov <luka.perkov@sartura.hr>
2015-02-06 17:24:34 +01:00
DrEagle
7f30f4b5b2 kirkwood: sheevaplug: fix multiple defines
Signed-off-by: Gérald Kerma <drEagle@doukki.net>
Reviewed-by: Luka Perkov <luka.perkov@sartura.hr>
2015-02-06 17:24:32 +01:00
DrEagle
815451e0d1 kirkwood: sheevaplug: fix style
Signed-off-by: Gérald Kerma <drEagle@doukki.net>
Reviewed-by: Luka Perkov <luka.perkov@sartura.hr>
2015-02-06 17:23:42 +01:00
Masahiro Yamada
08fda258ee ARM: UniPhier: revive support card info
Since commit 0365ffcc0b (generic-board: show model name in
board_init_f() too), the support card information has not been
displayed because check_support_card() is invoked only when
show_board_info() fails to get the model name from Device Tree.

This commit adds misc_init_f() function to call check_support_card()
from there.

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
2015-02-07 00:15:03 +09:00
Masahiro Yamada
35adfc4d25 ARM: UniPhier: move SPL init functions to spl_board_init()
Now init functions called from board_postclk_init() and dram_init()
are only necessary for SPL.
Move them to spl_board_init() for clean-up.

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
2015-02-07 00:15:03 +09:00
Masahiro Yamada
84ccd791af ARM: UniPhier: move pin_init() to board_early_init_f()
Currently, I/O pin settings are not necessary for SPL.
The board_early_init_f() seems a suitable place to call pin_init().

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
2015-02-07 00:15:02 +09:00
Masahiro Yamada
75bc8e85b5 ARM: UniPhier: add environment variable to update images in NAND
To boot UniPhier boards with the NAND boot mode, two images
(u-boot-spl.bin and u-boot-dtb.img) must be written at the correct
offset addresses.

TFTP downloading is useful to update such images in the NAND device.
We generally do:

  => nand erase 0 0x100000
  => tftpboot u-boot-spl.bin
  => nand write $loadaddr 0 0x10000
  => tftpboot u-boot-dtb.img
  => nand write $loadaddr 0x10000 0xf0000

It is a tedious and error-prone operation.

This commit provides the shorthand:

  => run nandupdate

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
2015-02-07 00:11:12 +09:00
Masahiro Yamada
0e063dff5c ARM: UniPhier: use "&&" instead of "; " in commands
Run the next command only when the previous one succeeded.

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
2015-02-07 00:11:03 +09:00
Simon Glass
bc17d8f4ac x86: video: Allow video ROM execution to fall back to the other method
If the BIOS emulator is not available, allow use of native execution if
available, and vice versa. This can be controlled by the caller.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2015-02-05 22:16:43 -07:00
Simon Glass
3423623835 x86: pci: Add PCI IDs for Minnowboard Max
This board includes a few IDs we have not seen before.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2015-02-05 22:16:42 -07:00
Simon Glass
250e039da8 pci: Add a function to find a device by class
There is an existing function prototype in the header file but it is not
implemented. Implement something similar.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2015-02-05 22:16:42 -07:00
Tom Rini
7f641d53bb Merge branch 'master' of git://git.denx.de/u-boot-ubi 2015-02-04 13:30:00 -05:00
Tom Rini
37ffffb98d Merge branch 'master' of git://git.denx.de/u-boot-ti 2015-02-02 12:37:34 -05:00
Tom Rini
ade8bc14ad Merge branch 'master' of git://git.denx.de/u-boot-blackfin 2015-02-02 11:51:58 -05:00
Tom Rini
be8ddad9c8 Merge branch 'master' of git://git.denx.de/u-boot-sunxi 2015-02-02 10:11:44 -05:00
Hans de Goede
37d46dd3c4 sunxi: rsb: Move rsb_set_device_mode() call to rsb_init()
It turns out that the device_mode_data is rsb specific, rather then slave
specific, so integrate the rsb_set_device_mode() call into rsb_init().

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Ian Campbell <ijc@hellion.org.uk>
2015-02-02 13:55:14 +01:00
Hans de Goede
ad40610b48 sunxi: Only enable i2c support in the SPL when needed
We do not need i2c support in the SPL when there is no PMIC (some sun4i
boards), or when the PMIC is not using i2c such as on sun6i and sun8i.

This reduces the SPL size from (e.g.) 21812 to 19260 bytes.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Ian Campbell <ijc@hellion.org.uk>
2015-02-02 13:55:14 +01:00
Bhupesh Sharma
1b1069cdce configs/ls2085a: Add support for Cortex-A57 erratas
This patch adds support for handling 828024 and 826974 erratas
for Cortex-A57 cores present on LS2085A SoC.

Signed-off-by: Bhupesh Sharma <bhupesh.sharma@freescale.com>
2015-01-31 23:47:39 +01:00
Tom Rini
a0573d1988 Merge branch 'master' of git://git.denx.de/u-boot-mips 2015-01-30 13:56:15 -05:00
Tom Rini
8e3da9dd11 Merge branch 'master' of git://git.denx.de/u-boot-dm 2015-01-30 09:24:42 -05:00
Linus Walleij
ffc103732c vexpress64: support the Juno Development Platform
The Juno Development Platform is a physical Versatile Express
device with some differences from the emulated semihosting
models. The main difference is that the system is split in
a SoC and an FPGA where the SoC hosts the serial ports at
totally different adresses.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-01-30 09:19:17 -05:00
Linus Walleij
f91afc4d00 vexpress64: get rid of CONFIG_SYS_EXTRA_OPTIONS
The Versatile Express ARMv8 semihosted FVP platform is still
using the legacy CONFIG_SYS_EXTRA_OPTIONS method to configure
some compile-time flags. Get rid of this and create a Kconfig
entry for the FVP model, and a selectable bool for the
semihosting library.

The FVP subboard is now modeled as a target choice so we can
eventually choose between different ARMv8 versatile express
boards (FVP, base model, Juno...) this way. All dependent
symbols are updated to reflect this.

The 64bit Versatile Express board symbols are renamed
VEXPRESS64 so we have some chance to see what is actually
going on. Tested on the FVP fast model.

Acked-by: Steve Rae <srae@broadcom.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-01-30 09:19:17 -05:00
Chris Kuethe
9561723c76 arm: switch armltd vexpress to GENERIC_BOARD
only tested tested under QEMU with vexpress_ca9x4 ("-M vexpress-a9") and
vexpress_ca15_tc2 ("-M vexpress-a15"). Makes the ugly warning go away.

Signed-off-by: Chris Kuethe <chris.kuethe+github@gmail.com>
2015-01-30 09:19:16 -05:00
Stephen Warren
cc11b39288 distro_bootcmd: read DHCP boot script name from a variable
Modify $bootcmd_dhcp to read the downloaded script filename from an
environment variable rather than hard-coding it. This allows the user
(or another script) to select a different script name if they want,
without editing the whole value of $bootcmd_dhcp.

Signed-off-by: Stephen Warren <swarren@nvidia.com>
2015-01-30 09:19:16 -05:00
Simon Glass
85df958ce2 dm: cros_ec: Convert cros_ec_i2c over to driver model
Move this driver to use driver model and update the snow configuration to
match.

Signed-off-by: Simon Glass <sjg@chromium.org>
2015-01-29 17:10:01 -07:00
Simon Glass
d744d56136 dm: i2c: Add two more I2C init functions to the compatibility layer
These functions are useful in case the board calls them. Also fix a missing
parameter caused by applying the wrong patch (actually I failed to send v2
and applied v1 by mistake).

Signed-off-by: Simon Glass <sjg@chromium.org>
2015-01-29 17:10:01 -07:00
Przemyslaw Marczak
189d80166b exynos5: enable dm i2c
This patch enables CONFIG_DM_I2C and also CONFIG_DM_I2C_COMPAT.
The last one should be removed when all the i2c peripheral
drivers will use dm i2c framework.

Signed-off-by: Przemyslaw Marczak <p.marczak@samsung.com>
Acked-by: Simon Glass <sjg@chromium.org>
Cc: Akshay Saraswat <akshay.s@samsung.com>
Cc: Minkyu Kang <mk7.kang@samsung.com>
Cc: Simon Glass <sjg@chromium.org>
2015-01-29 17:10:01 -07:00
Przemyslaw Marczak
47b37958f6 odroid u3: enable dm i2c support
This patch enables CONFIG_DM_I2C and also CONFIG_DM_I2C_COMPAT.
The last one should be removed when the dm pmic framework will
be finished.

Signed-off-by: Przemyslaw Marczak <p.marczak@samsung.com>
Acked-by: Simon Glass <sjg@chromium.org>
Cc: Minkyu Kang <mk7.kang@samsung.com>
2015-01-29 17:10:01 -07:00
Przemyslaw Marczak
ba1b4b1a0b smdk5250: config: enable max77686 driver support
This commit enable support for the above driver,
which was disabled in common config.

Signed-off-by: Przemyslaw Marczak <p.marczak@samsung.com>
Acked-by: Simon Glass <sjg@chromium.org>
Cc: Simon Glass <sjg@chromium.org>
Cc: Minkyu Kang <mk7.kang@samsung.com>
2015-01-29 17:10:00 -07:00
Przemyslaw Marczak
8c94a83883 exynos5250: config: disable max77686 driver
This PMIC is not common for all Exynos5250
based boards, so should be romoved from
common config.

Signed-off-by: Przemyslaw Marczak <p.marczak@samsung.com>
Acked-by: Simon Glass <sjg@chromium.org>
Cc: Simon Glass <sjg@chromium.org>
Cc: Minkyu Kang <mk7.kang@samsung.com>
2015-01-29 17:10:00 -07:00
Przemyslaw Marczak
480d49eb0e arndale: config: disable max77686 support
There is no MAX77686 pmic on this board,
so the driver support should be removed.

Signed-off-by: Przemyslaw Marczak <p.marczak@samsung.com>
Cc: Minkyu Kang <mk7.kang@samsung.com>
2015-01-29 17:09:59 -07:00
Ruchika Gupta
b37b46f042 rsa: Use checksum algorithms from struct hash_algo
Currently the hash functions used in RSA are called directly from the sha1
and sha256 libraries. Change the RSA checksum library to use the progressive
hash API's registered with struct hash_algo. This will allow the checksum
library to use the hardware accelerated progressive hash API's once available.

Signed-off-by: Ruchika Gupta <ruchika.gupta@freescale.com>
CC: Simon Glass <sjg@chromium.org>
Acked-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Simon Glass <sjg@chromium.org>
(Fixed build error in am335x_boneblack_vboot due to duplicate CONFIG_DM)

Change-Id: Ic44279432f88d4e8594c6e94feb1cfcae2443a54
2015-01-29 17:09:59 -07:00
Ruchika Gupta
2dd9002719 Use hash.c in mkimage
Signed-off-by: Ruchika Gupta <ruchika.gupta@freescale.com>
CC: Simon Glass <sjg@chromium.org>
Acked-by: Simon Glass <sjg@chromium.org>
2015-01-29 17:09:59 -07:00
Ruchika Gupta
46fe2c0444 hash: Add function to find hash_algo struct with progressive hash
The hash_algo structure has some implementations in which progressive hash
API's are not defined. These are basically the hardware based implementations
of SHA. An API is added to find the algo which has progressive hash API's
defined. This can then be integrated with RSA checksum library which uses
Progressive Hash API's.

Signed-off-by: Ruchika Gupta <ruchika.gupta@freescale.com>
CC: Simon Glass <sjg@chromium.org>
Acked-by: Simon Glass <sjg@chromium.org>
2015-01-29 17:09:59 -07:00
Ruchika Gupta
c937ff6dc2 lib/rsa: Modify rsa to use DM driver
Modify rsa_verify to use the rsa driver of DM library .The tools
will continue to use the same RSA sw library.

CONFIG_RSA is now dependent on CONFIG_DM. All configurations which
enable FIT based signatures have been modified to enable CONFIG_DM
by default.

Signed-off-by: Ruchika Gupta <ruchika.gupta@freescale.com>
CC: Simon Glass <sjg@chromium.org>
Acked-by: Simon Glass <sjg@chromium.org>
2015-01-29 17:09:58 -07:00
Ruchika Gupta
11a9662ba9 configs: Move CONFIG_FIT_SIGNATURE to defconfig
For the platforms which use,CONFIG_FIT_SIGNATURE, the required configs are
moved to the platform's defconfig file. Selecting CONFIG_FIT_SIGNATURE using
defconfig automatically resolves the dependencies for signature verification.
The RSA library gets automatically selected and user does not have to define
CONFIG_RSA manually.

Signed-off-by: Ruchika Gupta <ruchika.gupta@freescale.com>
CC: Simon Glass <sjg@chromium.org>
Acked-by: Simon Glass <sjg@chromium.org>
2015-01-29 17:09:58 -07:00
Ruchika Gupta
31d2b4fd90 DM: crypto/rsa_mod_exp: Add rsa Modular Exponentiation DM driver
Add a new rsa uclass for performing modular exponentiation and implement
the software driver basing on this uclass.

Signed-off-by: Ruchika Gupta <ruchika.gupta@freescale.com>
CC: Simon Glass <sjg@chromium.org>
Acked-by: Simon Glass <sjg@chromium.org>
2015-01-29 17:09:58 -07:00
Ruchika Gupta
fc2f4246b4 rsa: Split the rsa-verify to separate the modular exponentiation
Public exponentiation which is required in rsa verify functionality is
tightly integrated with verification code in rsa_verify.c. The patch
splits the file into twp separating the modular exponentiation.

1. rsa-verify.c
- The file parses device tree keys node to fill a keyprop structure.
The keyprop structure can then be converted to implementation specific
format.
(struct rsa_pub_key for sw implementation)
- The parsed device tree node is then passed to a generic rsa_mod_exp
function.

2. rsa-mod-exp.c
Move the software specific functions related to modular exponentiation
from rsa-verify.c to this file.

Signed-off-by: Ruchika Gupta <ruchika.gupta@freescale.com>
CC: Simon Glass <sjg@chromium.org>
Acked-by: Simon Glass <sjg@chromium.org>
2015-01-29 17:09:58 -07:00
Martin Dorwig
49cad54788 Export redesign
this is an atempt to make the export of functions typesafe.
I replaced the jumptable void ** by a struct (jt_funcs) with function pointers.
The EXPORT_FUNC macro now has 3 fixed parameters and one
variadic parameter
The first is the name of the exported function,
the rest of the parameters are used to format a functionpointer
in the jumptable,

the EXPORT_FUNC macros are expanded three times,
1. to declare the members of the struct
2. to initialize the structmember pointers
3. to call the functions in stubs.c

Signed-off-by: Martin Dorwig <dorwig@tetronik.com>
Acked-by: Simon Glass <sjg@chromium.org>

Signed-off-by: Simon Glass <sjg@chromium.org>
(resending to the list since my tweaks are not quite trivial)
2015-01-29 17:09:57 -07:00
Simon Glass
b9749eb5e4 dm: exynos: Drop unused COMPAT features for SPI
This has moved to driver model so we don't need the fdtdec support.

Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: Minkyu Kang <mk7.kang@samsung.com>
2015-01-29 17:09:57 -07:00
Simon Glass
dedff1a000 dm: tegra: Drop unused COMPAT features for I2C, SPI
These have moved to driver model so we don't need the fdtdec support.

Signed-off-by: Simon Glass <sjg@chromium.org>
2015-01-29 17:09:56 -07:00
Simon Glass
e6f66ec0e7 dm: i2c: Move slave details to child platdata
At present we go through various contortions to store the I2C's chip
address in its private data. This only exists when the chip is active so
must be set up when it is probed. Until the device is probed we don't
actually record what address it will appear on.

However, now that we can support per-child platform data, we can use that
instead. This allows us to set up the address when the child is bound,
and avoid the messy contortions.

Unfortunately this is a fairly large change and it seems to be difficult to
break it down further.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
2015-01-29 17:09:56 -07:00
Simon Glass
d0cff03e18 dm: spi: Move slave details to child platdata
At present we go through various contortions to store the SPI slave's chip
select in its private data. This only exists when the slave is active so
must be set up when it is probed. Until the device is probed we don't
actually know what chip select it will appear on.

However, now that we can support per-child platform data, we can use that
instead. This allows us to set up the chip select when the child is bound,
and avoid the messy contortions.

Unfortunately this is a fairly large change and it seems to be difficult to
break it down further.

Signed-off-by: Simon Glass <sjg@chromium.org>
2015-01-29 17:09:56 -07:00
Simon Glass
83c7e434c9 dm: core: Allow uclass to set up a device's child before it is probed
Some buses need to set up their devices before they can be used. This setup
may well be common to all buses in a particular uclass. Support a common
pre-probe method for the uclass, called before any bus devices are probed.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
2015-01-29 17:09:56 -07:00
Simon Glass
081f2fcbd9 dm: core: Allow the uclass to set up a device's child after binding
For buses, after a child is bound, allow the uclass to perform some
processing. This can be used to figure out the address of the child (e.g.
the chip select for SPI slaves) so that it is ready to be probed.

This avoids bus drivers having to repeat the same process, which really
should be done by the uclass, since it is common.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
2015-01-29 17:09:56 -07:00
Simon Glass
dac8db2ce6 dm: core: Allow uclasses to specify private data for a device's children
In many cases the per-child private data for a device's children is defined
by the uclass rather than the individual driver. For example, a SPI bus
needs to store information about each of its children, but all SPI drivers
store the same information. It makes sense to allow the uclass to define
this data.

If the driver provides a size value for its per-child private data, then use
it. Failng that, fall back to that provided by the uclass.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
2015-01-29 17:09:55 -07:00
Simon Glass
9cc36a2b89 dm: core: Add a flag to control sequence numbering
At present we try to use the 'reg' property and device tree aliases to give
devices a sequence number. The 'reg' property is often actually a memory
address, so the sequence numbers thus-obtained are not useful. It would be
better if the devices were just sequentially numbered in that case. In fact
neither I2C nor SPI use this feature, so drop it.

Some devices need us to look up an alias to number them within the uclass.
Add a flag to control this, so it is not done unless it is needed.

Adjust the tests to test this new behaviour.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
2015-01-29 17:09:55 -07:00
Simon Glass
b367053102 dm: core: Add a function to get a device's uclass ID
This is useful to check which uclass a device is in.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
2015-01-29 17:09:55 -07:00
Simon Glass
0118ce7957 dm: core: Add a post_bind method for parents
Allow parent drivers to be called when a new child is bound to them. This
allows a bus to set up information it needs for that child.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
2015-01-29 17:09:55 -07:00
Simon Glass
ba8da9dc43 dm: core: Allow uclasses to specify platdata for a device's children
In many cases the child platform data for a device's children is defined by
the uclass rather than the individual devices. For example, a SPI bus needs
to know the chip select and speed for each of its children. It makes sense
to allow this information to be defined the SPI uclass rather than each
individual driver.

If the device provides a size value for its child platdata, then use it.
Failng that, fall back to that provided by the uclass.

Reviewed-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Signed-off-by: Simon Glass <sjg@chromium.org>
2015-01-29 17:09:55 -07:00
Simon Glass
cdc133bde9 dm: core: Allow parents to have platform data for their children
For buses it is common for parents to need to know the address of the child
on the bus, the bus speed to use for that child, and other information. This
can be provided in platform data attached to each child.

Add driver model support for this, including auto-allocation which can be
requested using a new property to specify the size of the data.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
2015-01-29 17:09:54 -07:00
Simon Glass
040b69af72 dm: core: Improve comments for uclass_first/next_device()
Mention that the devices are probed ready for use.

Signed-off-by: Simon Glass <sjg@chromium.org>
2015-01-29 17:09:54 -07:00
Simon Glass
25ab4b0303 dm: i2c: Provide an offset length parameter where needed
Rather than assuming that the chip offset length is 1, allow it to be
provided. This allows chips that don't use the default offset length to
be used (at present they are only supported by the command line 'i2c'
command which sets the offset length explicitly).

Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: Heiko Schocher <hs@denx.de>
2015-01-29 17:09:53 -07:00
Simon Glass
73845350b6 dm: i2c: Add a compatbility layer
For boards which use multiple I2C devices, or for SOCs which support
multiple boards, we might want to convert these to driver model at different
times. At present this is difficult because we need to either use
CONFIG_DM_I2C for a board or not.

Add a compatibility layer which implements the old API, thus allowing a
board to move to driver model for I2C without requiring that everything it
uses is moved in the same commit.

Signed-off-by: Simon Glass <sjg@chromium.org>
2015-01-29 17:09:53 -07:00
Simon Glass
f9a4c2da72 dm: i2c: Rename driver model I2C functions to permit compatibility
Add a dm_ prefix to driver model I2C functions so that we can keep the old
ones around.

This is a little unfortunate, but on reflection it is too difficult to
change the API. We can undo this rename when most boards and drivers are
converted to use driver model for I2C.

Signed-off-by: Simon Glass <sjg@chromium.org>
2015-01-29 17:09:53 -07:00
Simon Glass
009067c3b7 dm: fdt: Remove the old GPIO functions
Now that we support device tree GPIO bindings directly in the driver model
GPIO uclass we can remove these functions.

Signed-off-by: Simon Glass <sjg@chromium.org>
2015-01-29 17:09:53 -07:00
Simon Glass
0347960b87 dm: mmc: Remove use of fdtdec GPIO support
These functions are going away, so use the new uclass support instead.

Signed-off-by: Simon Glass <sjg@chromium.org>
2015-01-29 17:09:52 -07:00
Simon Glass
32f8a19f6d dm: cros_ec: Remove use of fdtdec GPIO support
These functions are going away, so use the new uclass support instead.

Signed-off-by: Simon Glass <sjg@chromium.org>
2015-01-29 17:09:51 -07:00
Simon Glass
a02af4aeec dm: demo: Add a simple GPIO demonstration
Add a new 'demo light' command which uses GPIOs to control imaginary lights.
Each light is assigned a bit number in the overall value. This provides an
example driver for using the new GPIO API.

Signed-off-by: Simon Glass <sjg@chromium.org>
2015-01-29 17:09:51 -07:00
Simon Glass
5d1c17e9a5 dm: gpio: Mark the old GPIO API deprecated
Add a deprecation notice to each function so that it is more obvious that we
are moving GPIOs to driver model.

Signed-off-by: Simon Glass <sjg@chromium.org>
2015-01-29 17:09:51 -07:00
Simon Glass
3669e0e759 dm: gpio: Add better functions to request GPIOs
At present U-Boot sort-of supports the standard way of reading GPIOs from
device tree nodes, but the support is incomplete, a bit clunky and only
works for GPIO bindings where #gpio-cells is 2.

Add new functions to request GPIOs, taking full account of the device
tree binding. These permit requesting a GPIO with a simple call like:

   gpio_request_by_name(dev, "cd-gpios", 0, &desc, GPIOD_IS_IN);

This will request the GPIO, looking at the device's node which might be
this, for example:

   cd-gpios = <&gpio TEGRA_GPIO(B, 3) GPIO_ACTIVE_LOW>;

The GPIO will be set to input mode in this case and polarity will be
honoured by the GPIO calls.

It is also possible to request and free a list of GPIOs.

Signed-off-by: Simon Glass <sjg@chromium.org>
2015-01-29 17:09:51 -07:00
Simon Glass
0dac4d51f5 dm: gpio: Add a driver GPIO translation method
Only the GPIO driver knows about the full GPIO device tree binding used by
a device. Add a method to allow the driver to provide this information to the
uclass, including the GPIO offset within the device and flags such as the
polarity.

Signed-off-by: Simon Glass <sjg@chromium.org>
2015-01-29 17:09:50 -07:00
Simon Glass
ae7123f876 dm: gpio: Add a native driver model API
So far driver model's GPIO uclass just implements the existing GPIO API.
This has some limitations:

- it requires manual device tree munging to support GPIOs in device tree
    (fdtdec_get_gpio() and friends)
- it does not understand polarity
- it is somewhat slower since we must scan for the GPIO device each time
- Global GPIO numbering can change if other GPIO drivers are probed
- it requires extra steps to set the GPIO direction and value

The new functions have a dm_ prefix where necessary to avoid name conflicts
but we can remove that when it is no-longer needed. The new struct gpio_desc
holds all required information about the GPIO. For now this is intended to
be stored by the client requesting the GPIO, but in future it might be
brought into the uclass in some way.

With these changes the old GPIO API still works, and uses the driver model
API underneath.

Signed-off-by: Simon Glass <sjg@chromium.org>
2015-01-29 17:09:50 -07:00
Simon Glass
57068a7aeb dm: fdt: Add a function to decode phandles with arguments
For GPIOs and other functions we want to look up a phandle and then decode
a list of arguments for that phandle. Each phandle can have a different
number of arguments, specified by a property in the target node. This is
the "#gpio-cells" property for GPIOs.

Add a function to provide this feature, taken modified from Linux 3.18.

Signed-off-by: Simon Glass <sjg@chromium.org>
2015-01-29 17:09:50 -07:00
Masahiro Yamada
0365ffcc0b generic-board: show model name in board_init_f() too
The common/board_r.c has show_model_r() to display the model name
if the DTB has a "model" property.  It sounds useful to have a similar
function in common/board_f.c too because most of the boards show
their board name before relocation.

Instead of implementing the same function in both common/board_f.c
and common/board_r.c, let's split it up into common/show_board_info.c.

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Acked-by: Simon Glass <sjg@chromium.org>
2015-01-29 17:09:49 -07:00
Masahiro Yamada
233e42a985 ARM: UniPhier: enable CONFIG_I2C_EEPROM
Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Acked-by: Simon Glass <sjg@chromium.org>
2015-01-29 17:09:49 -07:00
Guilherme Maciel Ferreira
39931f966a dumpimage: fit: extract FIT images
The dumpimage is able to extract components contained in a FIT image:

  $ ./dumpimage -T flat_dt -i CONTAINER.ITB -p INDEX FILE

The CONTAINER.ITB is a regular FIT container file. The INDEX is the poisition
of the sub-image to be retrieved, and FILE is the file (path+name) to save the
extracted sub-image.

For example, given the following kernel.its to build a kernel.itb:

  /dts-v1/;
  / {
      ...
      images {
        kernel@1 {
          description = "Kernel 2.6.32-34";
          data = /incbin/("/boot/vmlinuz-2.6.32-34-generic");
          type = "kernel";
          arch = "ppc";
          os = "linux";
          compression = "gzip";
          load = <00000000>;
          entry = <00000000>;
          hash@1 {
            algo = "md5";
          };
        };
        ...
      };
      ...
    };

The dumpimage can extract the 'kernel@1' node through the following command:

  $ ./dumpimage -T flat_dt -i kernel.itb -p 0 kernel
  Extracted:
   Image 0 (kernel@1)
    Description:  Kernel 2.6.32-34
    Created:      Wed Oct 22 15:50:26 2014
    Type:         Kernel Image
    Compression:  gzip compressed
    Data Size:    4040128 Bytes = 3945.44 kB = 3.85 MB
    Architecture: PowerPC
    OS:           Linux
    Load Address: 0x00000000
    Entry Point:  0x00000000
    Hash algo:    md5
    Hash value:   22352ad39bdc03e2e50f9cc28c1c3652

Which results in the file 'kernel' being exactly the same as '/boot/vmlinuz-2.6.32-34-generic'.

Signed-off-by: Guilherme Maciel Ferreira <guilherme.maciel.ferreira@gmail.com>
2015-01-29 13:38:41 -05:00
Guilherme Maciel Ferreira
44f145fd81 linker_lists: fix misspellings
Signed-off-by: Guilherme Maciel Ferreira <guilherme.maciel.ferreira@gmail.com>
2015-01-29 13:38:40 -05:00
Sjoerd Simons
453c6cc19a distro_distro_bootcmd: use CONFIG_BOOTCOMMAND instead of setting bootcmd=
Move the bootcmd commands into a seperate distro_bootcmd environment
variable. Allowing a user to easily launch the distro boot sequence if
the default bootcmd did not default to distro boot commands.

Also set CONFIG_BOOTCOMMAND to "run distro_bootcmd" if it hasn't been
configured yet rather then putting it directly in the environment. This
allows boards to make the distro boot commands available without
necessarily default to them or to use them as a fallback after running
some board specific commands instead.

Signed-off-by: Sjoerd Simons <sjoerd.simons@collabora.co.uk>
Reviewed-by: Stephen Warren <swarren@nvidia.com>
2015-01-29 13:38:39 -05:00
Sjoerd Simons
735b1cfeb2 config_distro_bootcmd: Scan all partitions for boot files
Not all devices use the convention that the boot scripts are on the
first partition. For example on chromebooks it seems common for the
first two partitions to be ChromeOS kernel partitions.

So instead of just the first partition scan all partitions on a device
with a filesystem u-boot can recognize.

Signed-off-by: Sjoerd Simons <sjoerd.simons@collabora.co.uk>
2015-01-29 13:37:24 -05:00
Sjoerd Simons
1a1ad8e090 fs: Add command to retrieve the filesystem type
New command to determine the filesystem type of a given partition.
Optionally stores the filesystem type in a environment variable.

Signed-off-by: Sjoerd Simons <sjoerd.simons@collabora.co.uk>
Reviewed-by: Stephen Warren <swarren@nvidia.com>
2015-01-29 13:36:54 -05:00
Heiko Schocher
b4b39a7e54 arm, imx6, aristainetos: board updates
- use linux display timing settings
- change backlight duty cycle 500ns
- some defaultenvironment changes
- change fit_addr_r to 0x14000000 as needed if
  MAX_LOCKDEP_SUBCLASSES in linux gets increased.
- Environment now at 0xd0000 in nand flash

Signed-off-by: Heiko Schocher <hs@denx.de>
2015-01-29 18:37:49 +01:00
Enric Balletbo i Serra
f3b4bc458d OMAP3: igep00x0: Fix boot hang and add support for status LED.
Use the STATUS_LED APIs for indicating a boot progress instead of
show_boot_progress.

This patch also fixes a problem introduced with commit b3f4ca1135 (dm: omap3:
Move to driver model for GPIO and serial). After that commit the board doesn't
boot. Looks like the problem is the gpio_request call inside the function
show_boot_progress.

Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
2015-01-29 12:00:50 -05:00
Pali Rohár
8dcd1b720e Nokia RX-51: Use generic board
Generic board with #define CONFIG_SYS_GENERIC_BOARD is working fine.
There is no visible difference between legacy and generic board code.

Signed-off-by: Pali Rohár <pali.rohar@gmail.com>
Acked-by: Pavel Machek <pavel@ucw.cz>
2015-01-29 12:00:49 -05:00
Tom Rini
6e721bdb54 am335x_evm: Enable CONFIG_NAND_OMAP_GPMC_PREFETCH
Signed-off-by: Tom Rini <trini@ti.com>
2015-01-29 12:00:49 -05:00
Nikita Kiryanov
f82eb2fa5d common: convert compulab splash load code to common code
Move board/compulab/common/splash.c code to
common/splash_source.c to make it available for everybody. This move
renames cl_splash_screen_prepare() to splash_source_load(), and
the compilation of this code is conditional on CONFIG_SPLASH_SOURCE.

splash_source features:
* Provide a standardized way for declaring board specific splash screen
  locations
* Provide existing routines for auto loading the splash image from the
  locations as declared by the board
* Introduce the "splashsource" environment variable, which makes it
  possible to select the splash image source.

cm-t35 and cm-fx6 are updated to use the modified version.

Signed-off-by: Nikita Kiryanov <nikita@compulab.co.il>
Cc: Stefano Babic <sbabic@denx.de>
Cc: Tom Rini <trini@ti.com>
Cc: Igor Grinberg <grinberg@compulab.co.il>
Cc: Anatolij Gustschin <agust@denx.de>
Reviewed-by: Tom Rini <trini@ti.com>
Acked-by: Igor Grinberg <grinberg@compulab.co.il>
2015-01-29 17:44:08 +01:00
Nikita Kiryanov
3a236a3563 arm: mx6: cm-fx6: add splash screen support
Add support for splash screen.
The splash screen is loaded from the SPI flash and is displayed on the
HDMI display.

Signed-off-by: Nikita Kiryanov <nikita@compulab.co.il>
[grinberg@compulab.co.il: minor code and commit message updates]
Signed-off-by: Igor Grinberg <grinberg@compulab.co.il>
Cc: Stefano Babic <sbabic@denx.de>
Cc: Igor Grinberg <grinberg@compulab.co.il>
2015-01-29 17:42:30 +01:00
Nikita Kiryanov
1c2e529243 arm: mx6: cm-fx6: add support for usb keyboard
Add support for usb keyboard for cm_fx6.

Signed-off-by: Nikita Kiryanov <nikita@compulab.co.il>
Cc: Stefano Babic <sbabic@denx.de>
Cc: Igor Grinberg <grinberg@compulab.co.il>
Acked-by: Igor Grinberg <grinberg@compulab.co.il>
2015-01-29 17:42:29 +01:00
Nikita Kiryanov
8015dde878 arm: mx6: cm-fx6: display compulab logo
Add compulab logo and display it on boot.

Signed-off-by: Nikita Kiryanov <nikita@compulab.co.il>
Cc: Stefano Babic <sbabic@denx.de>
Cc: Igor Grinberg <grinberg@compulab.co.il>
Acked-by: Igor Grinberg <grinberg@compulab.co.il>
2015-01-29 17:42:29 +01:00
Nikita Kiryanov
deb94d6192 arm: mx6: cm-fx6: add hdmi console support
Add support for hdmi console.

Signed-off-by: Nikita Kiryanov <nikita@compulab.co.il>
Cc: Stefano Babic <sbabic@denx.de>
Cc: Igor Grinberg <grinberg@compulab.co.il>
Acked-by: Igor Grinberg <grinberg@compulab.co.il>
2015-01-29 17:42:28 +01:00
Nikita Kiryanov
9fbdcf018e arm: mx6: cm-fx6: increase size of malloc area
Increase size of malloc area to make room for framebuffer
and other such big allocations.

Signed-off-by: Nikita Kiryanov <nikita@compulab.co.il>
Cc: Stefano Babic <sbabic@denx.de>
Cc: Igor Grinberg <grinberg@compulab.co.il>
2015-01-29 17:42:28 +01:00
Nikita Kiryanov
508a6edea9 arm: mx6: cm-fx6: expand boot sequence
Expand boot sequence to the following order:
1) mmc boot: mmc boot script, then mmc bootm, then mmc bootz.
2) usb boot: usb boot script.
3) sata boot: sata boot script, sata bootm, sata bootz.
4) nand boot: nand bootm, then nand bootz.

Signed-off-by: Nikita Kiryanov <nikita@compulab.co.il>
Cc: Stefano Babic <sbabic@denx.de>
Cc: Igor Grinberg <grinberg@compulab.co.il>
Acked-by: Igor Grinberg <grinberg@compulab.co.il>
2015-01-29 17:42:27 +01:00
Paul Burton
d4d774e00e malta: enable ELF loading
The ability to load ELF files is sometimes useful on Malta boards,
particularly for use with small embedded applications. Enable the
loadelf command in the malta config.

Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2015-01-29 13:11:02 +01:00
Paul Burton
a3bdaacaf6 malta: enable HUSH parser
The malta board is used for development and thus the shell is interacted
with often. Enable HUSH to make the experience a little more pleasant.

Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2015-01-29 13:11:02 +01:00
Paul Burton
ba21a453a5 malta: IDE support
This patch adds IDE support to the MIPS Malta board. The IDE controller
is enabled after probing the PCI bus and otherwise just makes use of
U-boot generic IDE support.

Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2015-01-29 13:11:02 +01:00
Anton Habegger
dc2884315d ubifs: Import atomic_long operations from Linux
This commit is a preperation for a subsequent UBIFS commit
which needs atomic_long operations.

Therefor "include/asm-generic/atomic-long.h" is imported
from 1860e37 Linux 3.15

Signed-off-by: Anton Habegger <anton.habegger@gmail.com>
2015-01-28 07:42:35 +01:00
Tom Rini
ab92da9f47 Merge branch 'master' of git://git.denx.de/u-boot-x86 2015-01-26 17:44:49 -05:00
Tom Rini
aed03faa06 Merge branch 'master' of git://git.denx.de/u-boot-atmel 2015-01-26 06:42:40 -05:00
Tom Rini
306df2c824 Merge branch 'zynq' of git://www.denx.de/git/u-boot-microblaze 2015-01-26 06:42:15 -05:00
Siva Durga Prasad Paladugu
c4fa511425 ARM: zynq: Add USB lthor download protocol support
updated the zynq config to support the lthor
download protocol.
This lthor functionality helps us to load linux
images on to DDR/MMC and can boot linux using bootm.
In order to load images the user should run lthor
command run "thor_ram" from u-boot prompt and
then send the images from host using lthor utility.

Define g_dnl_bind_fixup for zynq so that correct vendor
and product ids assigned incase of DFU and lthor.

Signed-off-by: Siva Durga Prasad Paladugu <sivadur@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2015-01-26 08:55:58 +01:00
Siva Durga Prasad Paladugu
87f3dbdffc ARM: zynq: Enable DFU functionality in zynq
Enable DFU functionality in zynq.
This DFU functionality helps us to load linux
images on to DDR and can boot linux using bootm.
In order to load images the user should run dfu
command "dfu 0 ram 0" from u-boot prompt and then
send the images from host.

The malloc size has been increased to match the DFU
buffer requirements.

Signed-off-by: Siva Durga Prasad Paladugu <sivadur@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2015-01-26 08:55:58 +01:00
Siva Durga Prasad Paladugu
f20b37f353 ARM: zynq: provide config option to select emio
Dont send always emio value as zero for zynq_gem_initialize
send it based on config.

Signed-off-by: Siva Durga Prasad Paladugu <sivadur@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2015-01-26 08:55:58 +01:00
Michal Simek
dd1c351ffe ARM: zynq: Group ethernet configuration options together
No functional chagnes.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2015-01-26 08:55:58 +01:00
Michal Simek
e9d69c1c71 ARM: zynq: Use CMD_FS_GENERIC
Based on:
"am335x_evm: Enable CMD_EXT4 and CMD_FS_GENERIC, add bootpart to env"
(sha1: 73a27a84e5)

Fix filesystem specific commands for loading.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2015-01-26 08:55:58 +01:00
Michal Simek
5a82d53c78 ARM: zynq: Show board information by default
Show board information in bootlog and enable it by default.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2015-01-26 08:55:57 +01:00
Tom Rini
03cae7261e Merge branch 'master' of git://git.denx.de/u-boot-marvell 2015-01-25 19:05:40 -05:00
Gerald Kerma
361b3d8613 marvell: kirkwood: guruplug refresh for newer kernel
Refresh for newer kernel.
Prepare ENV settings for sheevaplugs to be OpenWRT ready.

    +----------+
    | UBOOT    | >> 896 Kb (7x128)  = uboot
    +----------+
    | ENV      | >> 128 Kb          = uboot_env
    +----------+
    | ROOT(FS) | >> 511 Mb @ 1 Mb   = root -> rootfs (ubifs)
    +----------+

With (CC) TRUNK OpenWRT build (QUICK HOWTO) :

    <INTERRUPT>
    Marvell>> nand erase.part root
    Marvell>> ubi part root
    Marvell>> ubi remove rootfs
    Marvell>> ubi create rootfs
    Marvell>> usb reset
    Marvell>> fatload usb 2:1 0x800000 guruplug/openwrt/openwrt-kirkwood-guruplug-rootfs.ubifs
    Marvell>> ubi write 0x800000 rootfs ${filesize}
    Marvell>> reset

Changes in v1:
- ADD generic board define
- ADD FDT support
- ADD HUSH interpreter
- Define new NAND partition mapping

Signed-off-by: Gerald Kerma <dreagle@doukki.net>
2015-01-26 00:25:29 +01:00
Luka Perkov
d4d8f1b726 kirkwood: sheevaplug: add CONFIG_SYS_GENERIC_BOARD define
Signed-off-by: Luka Perkov <luka@openwrt.org>
Acked-by: Stefan Roese <sr@denx.de>
CC: Prafulla Wadaskar <prafulla@marvell.com>
2015-01-25 23:56:16 +01:00