Commit graph

292 commits

Author SHA1 Message Date
Marian Balakowicz
cb1c489690 Restore the ability to continue booting after legacy image overwrite
Before new uImage code was merged, bootm code allowed for the kernel image to
get overwritten during decompresion. new uImage introduced a check for image
overwrites and refused to boot the image that got overwritten. This patch
restores the old behavior. It also adds a warning when the image overwriten is
a multi-image file, because in such case accessing componentes other than the
first one will fail.

Signed-off-by: Marian Balakowicz <m8@semihalf.com>
2008-04-17 23:59:05 -07:00
Marian Balakowicz
de2b3216e6 ppc: Fix ftd_blob variable init when processing raw blob
Set fdt_blob variable before its value is printed out.

Signed-off-by: Marian Balakowicz <m8@semihalf.com>
2008-04-17 23:58:22 -07:00
Stefan Roese
dfc6c7b647 ppc: Revert patch 70431e8a that used _start instead of CFG_MONITOR_BASE
The patch 70431e8a73 (Make MPC83xx one step
closer to full relocation.) doesn't use CFG_MONITOR_BASE anymore. But
on 4xx systems _start currently cannot be used for this calculation.
So revert back to the original version for now.

Signed-off-by: Stefan Roese <sr@denx.de>
2008-04-09 11:54:11 +02:00
Wolfgang Denk
aeff6d503b Merge branch 'master' of git://www.denx.de/git/u-boot-fdt 2008-04-08 00:20:52 +02:00
Wolfgang Denk
e59af4b611 Merge branch 'master' of git://www.denx.de/git/u-boot-mpc83xx
Conflicts:

	lib_ppc/board.c

Signed-off-by: Wolfgang Denk <wd@denx.de>
2008-04-07 23:59:10 +02:00
Kim Phillips
6fe2946f19 remove remaining CONFIG_OF_HAS_{UBOOT_ENV,BD_T} code
finish off what commit 43ddd9c820,
"Remove deprecated CONFIG_OF_HAS_UBOOT_ENV and CONFIG_OF_HAS_BD_T"
started.

Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
2008-04-01 19:46:44 -04:00
Joakim Tjernlund
70431e8a73 Make MPC83xx one step closer to full relocation.
Remove a few absolute references to CFG_MONITOR_BASE for ppc/mpc83xx
and use GOT relative reference.

Signed-off-by: Joakim Tjernlund <Joakim.Tjernlund@transmode.se>
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
2008-03-28 18:51:54 -05:00
Michael Barkowski
5b2793a3f3 mpc8323erdb: fix EEPROM page size and get MAC from EEPROM
This patch fixes eeprom page size so that you can now write more than
64 bytes at a time.

It also makes the board take MAC addresses, if found, from EEPROM.

User should place up to 4 addresses at offset 0x7f00, for
eth{,1,2,3}addr.  Any unused addresses should be zero.  This group of
four six-byte values should have it's CRC at the end.  crc32 and
eeprom commands can be used to accomplish this.

If CRC fails, MAC addresses come from the environment.  If CRC
succeeds, the environment is overwritten at startup.

Signed-off-by: Michael Barkowski <michael.barkowski@freescale.com>
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
2008-03-28 16:02:27 -05:00
Stefan Roese
6fb4b64056 ppc: Set CFG_MEM_TOP_HIDE to 0 if not already defined
Signed-off-by: Stefan Roese <sr@denx.de>
2008-03-27 10:24:03 +01:00
Stefan Roese
14f73ca679 ppc: Add CFG_MEM_TOP_HIDE option to hide memory area that doesn't get "touched"
If CFG_MEM_TOP_HIDE is defined in the board config header, this specified
memory area will get subtracted from the top (end) of ram and won't get
"touched" at all by U-Boot. By fixing up gd->ram_size the Linux kernel
should gets passed the now "corrected" memory size and won't touch it
either. This should work for arch/ppc and arch/powerpc. Only Linux board
ports in arch/powerpc with bootwrapper support, which recalculate the
memory size from the SDRAM controller setup, will have to get fixed
in Linux additionally.

This patch enables this config option on some PPC440EPx boards as a workaround
for the CHIP 11 errata. Here the description from the AMCC documentation:

CHIP_11: End of memory range area restricted access.
Category: 3

Overview:
The 440EPx DDR controller does not acknowledge any
transaction which is determined to be crossing over the
end-of-memory-range boundary, even if the starting address is
within valid memory space. Any such transaction from any PLB4
master will result in a PLB time-out on PLB4 bus.

Impact:
In case of such misaligned bursts, PLB4 masters will not
retrieve any data at all, just the available data up to the
end of memory, especially the 440 CPU. For example, if a CPU
instruction required an operand located in memory within the
last 7 words of memory, the DCU master would burst read 8
words to update the data cache and cross over the
end-of-memory-range boundary. Such a DCU read would not be
answered by the DDR controller, resulting in a PLB4 time-out
and ultimately in a Machine Check interrupt. The data would
be inaccessible to the CPU.

Workaround:
Forbid any application to access the last 256 bytes of DDR
memory. For example, make your operating system believe that
the last 256 bytes of DDR memory are absent. AMCC has a patch
that does this, available for Linux.

This patch sets CFG_MEM_TOP_HIDE for the following 440EPx boards:
lwmon5, korat, sequoia

The other remaining 440EPx board were intentionally not included
since it is not clear to me, if they use the end of ram for some
other purpose. This is unclear, since these boards have CONFIG_PRAM
defined and even comments like this:

PMC440.h:
/* esd expects pram at end of physical memory.
 * So no logbuffer at the moment.
 */

It is strongly recommended to not use the last 256 bytes on those
boards too. Patches from the board maintainers are welcome.

Signed-off-by: Stefan Roese <sr@denx.de>
2008-03-27 10:12:07 +01:00
Dave Liu
cd54081cd4 ata: enable the sata initialize on boot up
Signed-off-by: Dave Liu <daveliu@freescale.com>
2008-03-26 23:38:54 +01:00
Wolfgang Denk
438a4c1126 Cleanup coding style, update CHANGELOG
Signed-off-by: Wolfgang Denk <wd@denx.de>
2008-03-26 11:48:46 +01:00
Bartlomiej Sieka
27f33e9f45 Merge branch 'new-image' of git://www.denx.de/git/u-boot-testing
Conflicts:

	common/cmd_bootm.c
	cpu/mpc8xx/cpu.c

Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
2008-03-26 09:38:06 +01:00
Kumar Gala
9c666a7db0 ppc: Allow boards to specify how much memory they can map
For historical reasons we limited the stack to 256M because some boards
could only map that much via BATS.  However newer boards are capable of
mapping more memory (for example 85xx is capble of doing up to 2G).

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-03-25 22:26:11 +01:00
Bartlomiej Sieka
dafaede8a4 [new uImage] Disable debuging output in preparation for merge with master
Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
2008-03-20 23:20:31 +01:00
Yuri Tikhonov
3d61018643 The patch introduces the alternative configuration of the log buffer for the lwmon5 board: the storage for the log-buffer itself is OCM(on-chip memory), the log-buffer header is moved to six GPT registers (PPC440EPX_GPT0_COMP1, ..., PPC440EPX_GPT0_COMP5).
To enable this, alternative, configuration the U-Boot board configuration
file for lwmon5 includes the definitions of alternative addresses for header
(CONFIG_ALT_LH_ADDR) and buffer (CONFIG_ALT_LB_ADDR).

 The Linux shall be configured with the CONFIG_ALT_LB_LOCATION option set,
and has the BOARD_ALT_LH_ADDR and BOARD_ALT_LB_ADDR constants defined in the
lwmon5 board-specific header (arch/ppc/platforms/4xx/lwmon5.h).

Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
2008-03-18 22:24:48 +01:00
Marian Balakowicz
f773bea8e1 [new uImage] Add proper ramdisk/FDT handling when FIT configuration is used
Save FIT configuration provied in the first bootm argument and use it
when to get ramdisk/FDT subimages when second and third (ramdisk/FDT)
arguments are not specified.

Signed-off-by: Marian Balakowicz <m8@semihalf.com>
2008-03-12 10:35:46 +01:00
Marian Balakowicz
cd7c596e9f [new uImage] Add new uImage format support to arch specific do_bootm_linux() routines
This patch updates architecture specific implementations of
do_bootm_linux() adding new uImage format handling for
operations like get kernel entry point address, get kernel
image data start address.

Signed-off-by: Marian Balakowicz <m8@semihalf.com>
2008-03-12 10:33:00 +01:00
Marian Balakowicz
3dfe110149 [new uImage] Add node offsets for FIT images listed in struct bootm_headers
This patch adds new node offset fields to struct bootm_headers
and updates bootm_headers processing code to make use of them.
Saved node offsets allow to avoid repeating fit_image_get_node() calls.

Signed-off-by: Marian Balakowicz <m8@semihalf.com>
2008-03-12 10:32:59 +01:00
Marian Balakowicz
bc8ed486b1 [new uImage] ppc: Add new uImage format support to FDT handling routines
Support for new (FIT) format uImages is added to powerpc specific
boot_get_fdt() routine which now recognizes, sanity checks FIT image
and is able to access data sections of the requested component image.

Signed-off-by: Marian Balakowicz <m8@semihalf.com>
2008-03-12 10:32:53 +01:00
Marian Balakowicz
d985c8498c [new uImage] Remove unnecessary arguments passed to ramdisk routines
boot_get_ramdisk() and image_get_ramdisk() do not need all
cmdtp, flag, argc and argv arguments. Simplify routines definition.

Signed-off-by: Marian Balakowicz <m8@semihalf.com>
2008-03-12 10:14:38 +01:00
Marian Balakowicz
05e07b1ea2 [new uImage] Fix FDT blob totalsize calculation in boot_relocate_fdt()
Do not use global fdt blob pointer, calculate blob size from routine
argument blob pointer.

Signed-off-by: Marian Balakowicz <m8@semihalf.com>
2008-02-29 22:22:46 +01:00
Marian Balakowicz
9a4daad0a3 [new uImage] Update naming convention for bootm/uImage related code
This patch introduces the following prefix convention for the
image format handling and bootm related code:

genimg_		- dual format shared code
image_		- legacy uImage format specific code
fit_		- new uImage format specific code
boot_		- booting process related code

Related routines are renamed and a few pieces of code are moved around and
re-grouped.

Signed-off-by: Marian Balakowicz <m8@semihalf.com>
2008-02-29 14:58:34 +01:00
Marian Balakowicz
e18489e8c2 Merge branch 'master' of git://www.denx.de/git/u-boot into new-image 2008-02-29 13:56:44 +01:00
Kumar Gala
75fa002c47 [new uImage] Respect autostart setting in linux bootm
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Acked-by: Marian Balakowicz <m8@semihalf.com>
2008-02-29 13:15:56 +01:00
Kumar Gala
d3f2fa0d27 [new uImage] Provide ability to restrict region used for boot images
Allow the user to set 'bootm_low' and 'bootm_size' env vars as a way
to restrict what memory range is used for bootm.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Acked-by: Marian Balakowicz <m8@semihalf.com>
2008-02-29 13:15:56 +01:00
Kumar Gala
e822d7fc4d [new uImage] Use lmb for bootm allocations
Convert generic ramdisk_high(), get_boot_cmdline(), get_boot_kbd()
functions over to using lmb for allocation of the ramdisk, command line
and kernel bd info.

Convert PPC specific fdt_relocate() to use lmb for allocation of the device
tree.

Provided a weak function that board code can call to do additional
lmb reserves if needed.

Also introduce the concept of bootmap_base to specify the offset in
physical memory that the bootmap is located at.  This is used for
allocations of the cmdline, kernel bd, and device tree as they should
be contained within bootmap_base and bootmap_base + CFG_BOOTMAPSZ.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-02-29 13:15:56 +01:00
Kumar Gala
4648c2e7a1 [new uImage] ppc: Allow boards to specify effective amount of memory
For historical reasons we limited the stack to 256M because some boards
could only map that much via BATS.  However newer boards are capable of
mapping more memory (for example 85xx is capable of doing up to 2G).

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Acked-by: Marian Balakowicz <m8@semihalf.com>
2008-02-29 13:15:24 +01:00
Kumar Gala
274cea2bdd [new uImage] rework error handling so common functions don't reset
Changed image_get_ramdisk() to just return NULL on error and have
get_ramdisk() propogate that error to the caller.  It's left to the
caller to call do_reset() if it wants to.

Also moved calling do_reset() in get_fdt() and fdt_relocate() on ppc
to a common location.  In the future we will change get_fdt() and
fdt_relocate() to return success/failure and not call do_reset() at all.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Acked-by: Marian Balakowicz <m8@semihalf.com>
2008-02-29 12:32:50 +01:00
Kumar Gala
d2bc095a63 [new uImage] ppc: Re-order ramdisk/fdt handling sequence
Doing the fdt before the ramdisk allows us to grow the fdt w/o concern
however it does mean we have to go in and fixup the initrd info since
we don't know where it will be.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-02-29 12:30:14 +01:00
Kumar Gala
27953493ef [new uImage] ppc: Determine if we are booting an OF style
If we are bootin OF style than we can skip setting up some things
that are used for the old boot method.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Acked-by: Marian Balakowicz <m8@semihalf.com>
2008-02-29 12:30:03 +01:00
Kumar Gala
a6612bdfe7 [new uImage] Don't pass kdb to ramdisk_high since we may not have one
We don't actually need the kdb param as we are just using it to get
bd->bi_memsize which we can get from gd->bd->bi_memsize.  Also, if we
boot via OF we might not actually fill out a kdb.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Acked-by: Marian Balakowicz <m8@semihalf.com>
2008-02-29 12:27:21 +01:00
Marian Balakowicz
4efbe9dbb1 [new uImage] Correct raw FDT blob handlig when CONFIG_FIT is disabled
Dual format image code must properly handle all three FDT passing methods:
- raw FDT blob passed
- FDT blob embedded in the legacy uImage
- FDT blob embedded in the new uImage

This patch enables proper raw FDT handling when no FIT imaeg support
is compiled in. This is a bit tricky as we must dected FIT format even
when FIT uImage handling is not enabled as both FIT uImages and raw FDT
blobs use tha same low level format (libfdt).

Signed-off-by: Marian Balakowicz <m8@semihalf.com>
2008-02-27 11:02:26 +01:00
Marian Balakowicz
ff0734cff0 [new uImage] POWERPC: Add image_get_fdt() routine
FDT blob may be passed either: (1) raw (2) or embedded in the legacy uImage
(3) or embedded in the new uImage. For the (2) case embedding image must be
verified before we get FDT from it. This patch factors out legacy image
specific verification routine to the separate helper routine.

Signed-off-by: Marian Balakowicz <m8@semihalf.com>
Acked-by: Kumar Gala <galak@kernel.crashing.org>
2008-02-27 11:02:26 +01:00
Marian Balakowicz
8a5ea3e616 [new uImage] Move image verify flag to bootm_headers structure
Do not pass image verification flag directly to related routines.
Simplify argument passing and move it to the bootm_header structure which
contains curently processed image specific data and is already being passed
on the argument list.

Signed-off-by: Marian Balakowicz <m8@semihalf.com>
Acked-by: Kumar Gala <galak@kernel.crashing.org>
2008-02-27 11:01:04 +01:00
Marian Balakowicz
823afe7cef [Makefile] Sort COBJS in lib_<arch> Makefiles
Signed-off-by: Marian Balakowicz <m8@semihalf.com>
2008-02-27 11:00:47 +01:00
Marian Balakowicz
d2ced9eb19 [new uImage] POWERPC: Split get_fdt() into get and relocate routines
PPC specific FDT blob handling code is divided into two separate routines:

get_fdt()	- find and verify a FDT blob (either raw or image embedded)
fdt_relocate()	- move FDT blob to within BOOTMAP if needed

Signed-off-by: Marian Balakowicz <m8@semihalf.com>
Acked-by: Kumar Gala <galak@kernel.crashing.org>
2008-02-27 10:59:56 +01:00
Marian Balakowicz
d5934ad775 [new uImage] Add dual format uImage support framework
This patch adds framework for dual format images. Format detection is added
and the bootm controll flow is updated to include cases for new FIT format
uImages.

When the legacy (image_header based) format is detected appropriate
legacy specific handling is invoked. For the new (FIT based) format uImages
dual boot framework has a minial support, that will only print out a
corresponding debug messages. Implementation of the FIT specific handling will
be added in following patches.

Signed-off-by: Marian Balakowicz <m8@semihalf.com>
2008-02-25 15:53:49 +01:00
Yuri Tikhonov
2e721094a7 lwmon5: enable hardware watchdog
Some boards (e.g. lwmon5) may use rather small watchdog intervals, so
causing it to reboot the board if U-Boot does a long busy-wait with
udelay(). Thus, for these boards we have to restart WD more
frequently.

This patch splits the busy-wait udelay() into smaller, predefined,
intervals, so that the watchdog timer may be resetted with the
configurable (CONFIG_WD_PERIOD) interval.

Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
2008-02-22 15:54:34 +01:00
Kumar Gala
81d93e5c4b ppc: Allow boards to specify effective amount of memory
For historical reasons we limited the stack to 256M because some boards
could only map that much via BATS.  However newer boards are capable of
mapping more memory (for example 85xx is capable of doing up to 2G).

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-02-22 12:35:53 +01:00
Marian Balakowicz
2242f53698 [new uImage] Rename and move print_image_hdr() routine
Signed-off-by: Marian Balakowicz <m8@semihalf.com>
2008-02-21 17:27:41 +01:00
Marian Balakowicz
fff888a199 [new uImage] Add gen_get_image() routine
This routine assures that image (whether legacy or FIT) is not
in a special dataflash storage.

If image address is a dataflash address image is moved to system RAM.

Signed-off-by: Marian Balakowicz <m8@semihalf.com>
2008-02-21 17:20:19 +01:00
Marian Balakowicz
20c9395933 Merge branch 'master' of /home/git/u-boot 2008-02-21 17:18:01 +01:00
Rafal Jaworowski
f57d7d364c ppc: Refactor cache routines, so there is only one common set.
Signed-off-by: Rafal Jaworowski <raj@semihalf.com>
2008-02-14 22:00:41 +01:00
Marian Balakowicz
7b325454fd [new uImage] Cleanup FDT handling in PPC do_boot_linux()
Move FDT blob finding and relocation to a dedicated
get_fdt() routine. It increases code readability and
will make adding support for new uImage format easier.

Signed-off-by: Marian Balakowicz <m8@semihalf.com>
2008-02-07 01:13:00 +01:00
Marian Balakowicz
b6b0fe6460 [new uImage] Cleanup do_botm_linux() boot allocations
This patch moves common pre-boot allocation steps shared between PPC
and M68K to a helper routines:

common:
- get_boot_sp_limit()
- get_boot_cmline()
- get_boot_kbd()

platform:
- set_clocks_in_mhz()

Signed-off-by: Marian Balakowicz <m8@semihalf.com>
2008-02-07 01:13:00 +01:00
Marian Balakowicz
ceaed2b1e5 [new uImage] Move ramdisk loading to a common routine
Ramdisk loading code, including initrd_high variable handling,
was duplicated for PPC and M68K platforms. This patch creates
common helper routine that is being called from both platform
do_bootm_linux() routines.

Signed-off-by: Marian Balakowicz <m8@semihalf.com>
2008-02-07 01:13:00 +01:00
Marian Balakowicz
5ad03eb385 [new uImage] Factor out common image_get_ramdisk() routine
Architecture specific do_bootm_linux() routines share common
ramdisk image processing code. Move this code to a common
helper routine.

Signed-off-by: Marian Balakowicz <m8@semihalf.com>
2008-02-07 01:12:59 +01:00
Marian Balakowicz
d3c5eb6dd1 [new uImage] Move FDT error printing to common fdt_error() routine
FDT error handling in PPC do_bootm_linux() shares the same message format.
This patch moves error message printing to a helper fdt_error() routine.

Signed-off-by: Marian Balakowicz <m8@semihalf.com>
Acked-by: Gerald Van Baren <vanbaren@cideas.com>
2008-02-07 01:12:59 +01:00
Marian Balakowicz
4a2ad5ff64 [new uImage] Remove OF_FLAT_TREE support from PPC bootm code
Support for OF_FLAT_TREE is to be obsoleted in the near future,
remove related code from the bootm routines.

Signed-off-by: Marian Balakowicz <m8@semihalf.com>
2008-02-07 01:12:57 +01:00
Marian Balakowicz
4a995edec1 [new uImage] Rename architecture specific bootm code files
Implementation of the do_bootm_linux() and other bootm helper routines is
architecture specific code. As such it resides in lib_<arch> directories
in files named <arch>_linux.c

This patch renames those files to a more clear and accurate
lib_<arch>/bootm.c form.

List of the renamed files:
   lib_arm/armlinux.c -> lib_arm/bootm.c
   lib_avr32/avr32_linux.c -> lib_avr32/bootm.c
   lib_blackfin/bf533_linux.c -> lib_blackfin/bootm.c
   lib_i386/i386_linux.c -> lib_i386/bootm.c
   lib_m68k/m68k_linux.c -> lib_m68k/bootm.c
   lib_microblaze/microblaze_linux.c -> lib_microblaze/bootm.c
   lib_mips/mips_linux.c -> lib_mips/bootm.c
   lib_nios/nios_linux.c -> lib_nios/bootm.c
   lib_nios2/nios_linux.c -> lib_nios2/bootm.c
   lib_ppc/ppc_linux.c -> lib_ppc/bootm.c
   lib_sh/sh_linux.c -> lib_sh/bootm.c

Signed-off-by: Marian Balakowicz <m8@semihalf.com>
2008-02-07 01:12:57 +01:00
Marian Balakowicz
7582438c28 [new uImage] Return error on image move/uncompress overwrites
Check for overwrites during image move/uncompress, return with error
when the original image gets corrupted. Report clear message to the user
and prevent further troubles when pointer to the corrupted images is passed
to do_bootm_linux routine.

Signed-off-by: Marian Balakowicz <m8@semihalf.com>
2008-02-07 01:12:57 +01:00
Marian Balakowicz
f13e7b2e99 [new uImage] Cleanup image header pointer use in bootm code
- use single image header pointer instead of a set of auxilliary variables.
- add multi component image helper routines: get component size/data address

Signed-off-by: Marian Balakowicz <m8@semihalf.com>
2008-02-07 01:12:57 +01:00
Marian Balakowicz
af13cdbc01 [new uImage] Add memmove_wd() common routine
Move common, watchdog sensible memmove code to a helper memmmove_wd() routine.

Signed-off-by: Marian Balakowicz <m8@semihalf.com>
2008-02-07 01:12:56 +01:00
Marian Balakowicz
958fc48abd [new uImage] Fix FDT header verification in PPC do_boot_linux() routine
Signed-off-by: Marian Balakowicz <m8@semihalf.com>
2008-02-07 01:12:56 +01:00
Marian Balakowicz
559316faf7 [new uImage] Move CHUNKSZ definition to image.h
CHUNKSZ defined for PPC and M68K is set to the same value of 64K,
move this definition to a common header.

Signed-off-by: Marian Balakowicz <m8@semihalf.com>
2008-02-07 01:12:55 +01:00
Marian Balakowicz
d45d5a18b6 [new uImage] Cleanup OF/FDT #if/#elif/#endif use in do_bootm_linux()
Make CONFIG_OF_LIBFDT and CONFIG_OF_FLAT_TREE use more
readable in PPC variant of do_bootm_linux() routine.

Signed-off-by: Marian Balakowicz <m8@semihalf.com>
2008-02-07 01:12:55 +01:00
Marian Balakowicz
5d3cc55ecb [new uImage] Move PPC do_bootm_linux() to lib_ppc/ppc_linux.c
PPC implementation of do_bootm_linux() routine is moved to
a dedicated file lib_ppc/ppc_linux.c

Signed-off-by: Marian Balakowicz <m8@semihalf.com>
2008-02-07 01:12:54 +01:00
Wolfgang Denk
ed3afca32e Merge branch 'master' of git://www.denx.de/git/u-boot-mpc86xx 2008-01-23 14:18:18 +01:00
Haiying Wang
d59feffb42 FSL: Fix common EEPROM_data structure definition
- Fix EEPROM_data structure definition according to System EEPROM Data Format.
- Read MAC addresses from EEPROM to ethXaddr before saving ethXaddr to
  bd->bi_ethaddr.

Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
2008-01-17 12:26:56 -06:00
Ben Warren
04a9e1180a Add support for a Freescale non-CPM SPI controller
This patch adds support for the SPI controller found on Freescale PowerPC
processors such as the MCP834x family.  Additionally, a new config option,
CONFIG_HARD_SPI, is added for general purpose SPI controller use.

Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
2008-01-17 11:02:25 -06:00
Grzegorz Bernacki
5d49e0e152 MPC512X: Cleanup bus clock names.
Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
2008-01-12 15:37:49 +01:00
Grzegorz Bernacki
281ff9a45c ads5121: Added support for FDT.
Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
2008-01-12 15:36:17 +01:00
Rafal Jaworowski
500856eb17 API for external applications.
This is an API for external (standalone) applications running on top of
U-Boot, and is meant to be more extensible and robust than the existing
jumptable mechanism. It is similar to UNIX syscall approach. See api/README
for more details.

Included is the demo application using this new framework (api_examples).

Please note this is still an experimental feature, and is turned off by
default.

Signed-off-by: Rafal Jaworowski <raj@semihalf.com>
2008-01-09 19:39:36 +01:00
Stefan Roese
9b94ac61d2 ppc4xx: Rework 4xx cache support
New cache handling functions added and all existing functions
moved from start.S into seperate cache.S.

Signed-off-by: Stefan Roese <sr@denx.de>
2007-10-31 21:21:46 +01:00
Kim Phillips
79f240f7ec lib_ppc: make board_add_ram_info weak
platforms wishing to display RAM diagnostics in addition to size,
can do so, on one line, in their own board_add_ram_info()
implementation.

this consequently eliminates CONFIG_ADD_RAM_INFO.

Thanks to Stefan for the hint.

Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
2007-08-18 21:39:46 +02:00
Stefan Roese
3b3bff4cbf Merge with git://www.denx.de/git/u-boot.git 2007-08-14 16:36:29 +02:00
Dave Liu
9be39a67c9 mpc83xx: Add support for the display of reset status
83xx processor family has many reset sources, such as
power on reset, software hard reset, software soft reset,
JTAG, bus monitor, software watchdog, check stop reset,
external hard reset, external software reset.
sometimes, to figure out the fault of system, we need to
know the cause of reset early before the prompt of
u-boot present.

Signed-off-by: Dave Liu <daveliu@freescale.com>
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
2007-08-10 01:12:03 -05:00
Wolfgang Denk
f2c2a937d8 Merge with /home/wd/git/u-boot/custodian/u-boot-testing 2007-08-06 01:11:08 +02:00
Andy Fleming
6bf6f114dc Merge branch 'testing' into working
Conflicts:

	CHANGELOG
	fs/fat/fat.c
	include/configs/MPC8560ADS.h
	include/configs/pcs440ep.h
	net/eth.c
2007-08-03 02:23:23 -05:00
Grzegorz Bernacki
c924098122 [ppc440SPe] Graceful recovery from machine check during PCIe configuration
During config transactions on the PCIe bus an attempt to scan for a
non-existent device can lead to a machine check exception with certain
peripheral devices. In order to avoid crashing in such scenarios the
instrumented versions of the config cycle read routines are introduced, so
the exceptions fixups framework can gracefully recover.

Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
Acked-by: Rafal Jaworowski <raj@semihalf.com>
2007-08-02 08:25:27 +02:00
Heiko Schocher
fad6340715 make show_boot_progress () weak.
Signed-off-by: Heiko Schocher <hs@denx.de>
2007-07-13 09:54:17 +02:00
Stefan Roese
e9514751cf Fix malloc problem introduced with the relocation fixup for the PPC platform
The relocation fixup didn't handle the malloc pointer initialization
correctly. This patch fixes this problem. Tested successfully on 4xx.
The relocation fixup patches for 4xx will follow soon.

Signed-off-by: Stefan Roese <sr@denx.de>
2007-07-11 00:43:32 +02:00
Jon Loeliger
b3aff0cb9e disk/ doc/ lib_*/ and tools/: Remove lingering references to CFG_CMD_* symbols.
Fixed some broken instances of "#ifdef CMD_CFG_IDE" too.
Those always evaluated TRUE, and thus were always compiled
even when IDE really wasn't defined/wanted.

Signed-off-by: Jon Loeliger <jdl@freescale.com>
2007-07-10 11:19:50 -05:00
Jon Loeliger
7def6b34f9 lib_{m68k,microblaze,mips,ppc}/: Remove obsolete references to CONFIG_COMMANDS
Signed-off-by: Jon Loeliger <jdl@freescale.com>
2007-07-09 18:02:11 -05:00
Wolfgang Denk
bf6a9ca9b2 Merge with /home/hs/Atronic/u-boot 2007-07-09 23:41:45 +02:00
Grant Likely
f82b3b6304 Don't set gd->reloc_off if relocation of .fixup works correctly
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2007-07-04 01:07:21 +02:00
Jon Loeliger
73f032021e lib_ppc/: Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).
This is a compatibility step that allows both the older form
and the new form to co-exist for a while until the older can
be removed entirely.

All transformations are of the form:
Before:
    #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
After:
    #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)

Signed-off-by: Jon Loeliger <jdl@freescale.com>
2007-07-04 00:23:16 +02:00
Wolfgang Denk
98c440bee6 Merge with /home/wd/git/u-boot/custodian/u-boot-testing 2007-07-03 15:07:56 +02:00
Heiko Schocher
566a494f59 [PCS440EP] upgrade the PCS440EP board:
- Show on the Status LEDs, some States of the board.
                - Get the MAC addresses from the EEProm
                - use PREBOOT
                - use the CF on the board.
                - check the U-Boot image in the Flash with a SHA1
                  checksum.
                - use dynamic TLB entries generation for the SDRAM

Signed-off-by: Heiko Schocher <hs@denx.de>
2007-06-22 19:11:54 +02:00
Wolfgang Denk
9045f33c02 Fix config problems on SC3 board; make ide_reset_timeout work. 2007-06-08 10:24:58 +02:00
Stefan Roese
ee96088ca5 Merge with git://www.denx.de/git/u-boot.git 2007-05-18 11:20:02 +02:00
Wolfgang Denk
3a71b5ca77 Merge with /home/git/u-boot 2007-05-17 00:06:11 +02:00
Zang Roy-r61911
1b305bdc75 Search the exception table with linear algorithm
Search the exception table with linear algorithm instead of
bisecting algorithm.
Because the exception table might be unsorted.

Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
2007-05-15 22:19:41 +02:00
Stefan Roese
343c48bd84 ppc4xx: Set bd->bi_pci_busfreq on 440EPx/GRx too
Signed-off-by: Stefan Roese <sr@denx.de>
2007-05-11 12:01:06 +02:00
Kim Phillips
54b2d434ae mpc83xx: replace elaborate boottime verbosity with 'clocks' command
and fix CPU: to align with Board: display text.

Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
2007-05-01 12:08:36 -05:00
Wolfgang Denk
14da5f7675 Cleanup compiler warnings, update CHANGELOG
Signed-off-by: Wolfgang Denk <wd@denx.de>
2007-04-20 17:43:28 +02:00
roy zang
ee460917af Merge branch 'master' into hpc2
Conflicts:

	drivers/cfi_flash.c

The patch by Heiko Schocher <hs@pollux.denx.de> on Jan, 19, 2007
fixes cfi_driver bug for mpc7448hpc2 board. The default cfi_driver can support
mpc7448hpc2 board.
2007-01-22 13:15:35 +08:00
Heiko Schocher
ca43ba18e9 Added support for the SOLIDCARD III board from Eurodesign
Signed-off-by: Heiko Schocher <hs@denx.de>
2007-01-11 15:44:44 +01:00
roy zang
a41969e09b Merge branch 'master' into hpc2 2007-01-04 11:10:05 +08:00
Wolfgang Denk
bc5556d62b Merge with /home/hs/TQ/u-boot-dev 2006-12-24 01:30:04 +01:00
Heiko Schocher
fa23044564 Added support for the TQM8272 board from TQ
Signed-off-by: Heiko Schocher <hs@denx.de>
2006-12-21 17:17:02 +01:00
roy zang
9d27b3a068 Slight code clean up.
Add comments, delete duplicate define and remove spaces.
Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
2006-12-04 17:56:59 +08:00
roy zang
c9c1eeed7d Fix the exception occuring in RAM table search issue.
The original search_one_table() function code can only processes the search
for the exception occurring in FLASH/ROM, because the exception and fixup
table usually locate in FLASH. If the exception address is also in
FLASH, it will be OK.
If the exception occurs in RAM, after the u-boot relocation, a
relocation offset should be added.

clean up the code in cpu/74xx_7xx/cpu.c

Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
2006-12-01 19:01:25 +08:00
roy zang
e0b369e4f7 Fix the confilcts when merging 'master' into hpc2.
The conflicts due to a new mpc7448 p3m7448 board is in the main tree.

Merge branch 'master' into hpc2

Conflicts:

	MAKEALL
	cpu/74xx_7xx/cpu.c
	cpu/74xx_7xx/cpu_init.c
	cpu/74xx_7xx/speed.c
2006-12-01 12:09:33 +08:00
Wolfgang Denk
dd520bf314 Code cleanup. 2006-11-30 18:02:20 +01:00
Timur Tabi
d239d74b1c mpc83xx: Replace CFG_IMMRBAR with CFG_IMMR
Replace all instances of CFG_IMMRBAR with CFG_IMMR, so that the 83xx
tree matches the other 8xxx trees.

Signed-off-by: Timur Tabi <timur@freescale.com>
2006-11-03 19:42:23 -06:00
roy zang
4c52783b3d General code modification for mpc7448hpc2 board support.
1. Add 7447A and 7448 processor support.
2. Add the following flags.

CFG_CONFIG_BUS_CLK : If the 74xx bus frequency can be configured dynamically
(such as by switch on board), this flag should be set.

CFG_EXCEPTION_AFTER_RELOCATE: If an exception occurs after the u-boot
relocates to RAM, this flag should be set.

CFG_SERIAL_HANG_IN_EXCEPTION: If the print out function will cause the
system hang in exception, this flag should be set.

There is a design issue for tsi108/109 pci configure  read. When pci scan
the slots, if there is no pci card, the tsi108/9 will cause a machine
check exception for mpc7448 processor.

Signed-off-by: Alexandre Bounine <alexandreb@tundra.com>
Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
2006-11-02 18:49:51 +08:00
Jon Loeliger
d22200f020 Merge branch 'master' of http://www.denx.de/git/u-boot 2006-10-19 12:03:44 -05:00
Wolfgang Denk
82165a334b Merge with /home/tur/proj/051_uboot_linux_v38b/u-boot 2006-10-18 22:27:57 +02:00
Bartlomiej Sieka
4707fb50cc Preliminary patch adding support for the MarelV38B board. 2006-10-13 21:09:09 +02:00
Jon Loeliger
daaba9859b Merge branch 'master' of http://www.denx.de/git/u-boot 2006-10-10 17:21:42 -05:00
Wolfgang Denk
2b208f5308 Move "ar" flags to config.mk to allow for silent "make -s"
Based on patch by Mike Frysinger, 20 Jun 2006
2006-10-09 01:02:05 +02:00
Jon Loeliger
afa98843e4 Merge branch 'master' of http://www.denx.de/git/u-boot
Conflicts:

	board/stxxtc/Makefile
2006-09-19 08:51:24 -05:00
Stefan Roese
887e2ec9ec Add support for AMCC Sequoia PPC440EPx eval board
- Add support for PPC440EPx & PPC440GRx
- Add support for PPC440EP(x)/GR(x) NAND controller
  in cpu/ppc4xx directory
- Add NAND boot functionality for Sequoia board,
  please see doc/README.nand-boot-ppc440 for details
- This Sequoia NAND image doesn't support environment
  in NAND for now. This will be added in a short while.
Patch by Stefan Roese, 07 Sep 2006
2006-09-07 11:51:23 +02:00
Marian Balakowicz
f93286397e Add support for a saving build objects in a separate directory.
Modifications are based on the linux kernel approach and
support two use cases:

  1) Add O= to the make command line
  'make O=/tmp/build all'

  2) Set environement variable BUILD_DIR to point to the desired location
  'export BUILD_DIR=/tmp/build'
  'make'

The second approach can also be used with a MAKEALL script
'export BUILD_DIR=/tmp/build'
'./MAKEALL'

Command line 'O=' setting overrides BUILD_DIR environent variable.

When none of the above methods is used the local build is performed and
the object files are placed in the source directory.
2006-09-01 19:49:50 +02:00
Haiying Wang
1c8f6d8fb0 Unlock cache before kernel starts up for MPC86xx 2006-08-17 11:00:27 -05:00
Jon Loeliger
281f69ede2 Merge branch 'wd' 2006-08-09 13:36:54 -05:00
Haiying Wang
bea3f28d28 Add support for reading and writing mac addresses to or from ID EEPROM.
Added code for reading and writing Mac addresses to/from ID EEPROM(0x57).
With attached patch, we can use command "mac/mac read/mac save/"
to read and write EEPROM under u-boot prompt.

U-boot will calculate the checksum of EEPROM while bootup,
if it is right, then u-boot will check whether the mac address
of eTSEC0/1/2/3 is availalbe (non-zero).

If there is mac address availabe in EEPROM, u-boot will use it,
otherewise, u-boot will use the mac address defined in
MPC8641HPCN.h. This matches the requirement to set unique mac address
for each TSEC port.

Signed-off-by: Haiying Wang <haiying.wang@freescale.com>
Signed-off-by: York Sun <yorksun@freescale.com>
2006-07-13 10:57:37 -05:00
Markus Klotzbuecher
090eb73510 Add support for TQM885D board.
Patch by Martin Krause, 20 Mar 2006

Signed-off-by: Martin Krause <martin.krause@tqs.de>
2006-07-12 15:26:01 +02:00
Marian Balakowicz
f6e5739a68 Merge: Add support for AMCC 440SPe CPU based eval board (Yucca). 2006-06-30 18:19:42 +02:00
Marian Balakowicz
bb105f24cc Call serial_initialize() before first debug() is used. 2006-06-30 15:27:09 +02:00
Haiying Wang
6cfea33477 Remove unneeded INIT_RAM_LOCK cache twiddling.
Correctly tracks r29 as global data pointer now.

Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
2006-05-10 09:38:06 -05:00
Jon Loeliger
debb7354d1 Initial support for MPC8641 HPCN board. 2006-04-26 17:58:56 -05:00
Wolfgang Denk
d87080b721 GCC-4.x fixes: clean up global data pointer initialization for all boards. 2006-03-31 18:32:53 +02:00
Kumar Gala
2688e2f972 Enable address translation on MPC83xx
Patch by Kumar Gala, 10 Feb 2006
2006-02-10 15:40:06 -06:00
Wolfgang Denk
f013dacf0a Code cleanup, especially MIPS for GCC 4.x 2005-12-04 00:40:34 +01:00
Stefan Roese
d96f41e016 Add support for TQM8541/8555 boards, TQM85xx support reworked:
- Support for TQM8541/8555 boards added.
- Complete rework of TQM8540/8560 support.
- Common TQM85xx code now supports all current TQM85xx platforms
  (TQM8540/8541/8555/8560).
- DDR SDRAM size detection added.
- CAS latency default values can be overwritten by setting "serial#"
  to e.g. "ABC0001 casl=25" -> CAS latency 2.5 will be used.
  If problems are detected with this non default CAS latency,
  the defualt values will be used instead.
- FLASH size detection added.
- Moved FCC ethernet driver initialization behind TSEC driver init
  -> TSEC is first device.

Patch by Stefan Roese, 30 Nov 2005
2005-11-30 13:06:40 +01:00
Marian Balakowicz
63ff004c4f Add support for multiple PHYs. 2005-10-28 22:30:33 +02:00
Wolfgang Denk
77ddac9480 Cleanup for GCC-4.x 2005-10-13 16:45:02 +02:00
Wolfgang Denk
7d314992a8 E500 update: repoint IVPR to RAM when code is relocated
Patch by Kylo Ginsberg, 13 Apr 2005
2005-10-05 00:00:54 +02:00
Wolfgang Denk
bce84c4dab Prepare U-Boot for gcc-4.x: fix global data pointer initialization
The global data pointer, stored in r29 before relocation to RAM, was
not initialized to a correct value. This happened because the pointer
declaration was done locally in the scope of the board_init_f()
function. What follows is a cite from gcc.info, 5.37, "Variables in
Specified Registers":
    ...
    The compiler's data flow analysis is capable of determining where
    the specified registers contain live values, and where they are
    available for other uses. Stores into local register variables
    may be deleted when they appear to be dead according to dataflow
    analysis. References to local register variables may be deleted
    or moved or simplified.
    ...
Moving the global data declaration to global scope solved the
problem.
2005-08-30 14:13:23 +02:00
Wolfgang Denk
7bc5ee0785 Prepare U-Boot for gcc-4.x 2005-08-26 01:36:03 +02:00
Stefan Roese
b79316f2a2 Add Sandburst Metrobox and Sandburst Karef board support packages.
Second serial port on 440GX now defined as a system device.
Add 'Short Etch' code for Cicada PHY within 440gx_enet.c
Patch by Travis B. Sawyer, 12 Jul 2005

Check return value of malloc in 440gx_enet.c
Patch by Travis B. Sawyer, 18 Jul 2005
2005-08-15 12:31:23 +02:00
Stefan Roese
846b0dd2dc Changed CONFIG_440_xx to CONFIG_440xx for a consistent design (405 and linux)
Patch by Stefan Roese, 08 Aug 2005
2005-08-08 12:42:22 +02:00
Jon Loeliger
4b1d95d96a Merge with rsync://git-user@source.denx.net/git/u-boot.git 2005-08-02 13:53:07 -05:00
Stefan Roese
c157d8e219 Add support for AMCC PPC440EP/GR eval boards Yosemite and Yellowstone.
Patch by Steven Blakeslee, 27 Jul 2005
2005-08-01 16:41:48 +02:00
Eran Liberty
f046ccd15c * Patch by Eran Liberty
Add support for the Freescale MPC8349ADS board.
2005-07-28 10:08:46 -05:00
Jon Loeliger
9c4c5ae3e1 * Patch by Jon Loeliger, Kumar Gala 2005-02-08
- Convert the CPM2 based functionality to use new CONFIG_CPM2
    option rather than a myriad of CONFIG_MPC8560-like variants.
    Applies to MPC85xx and MPC8260 boards, includes stxgp3 and sbc8560.
    Eliminates the CONFIG_MPC8560 option entirely.  Distributes the
    new CONFIG_CPM2 option to each 8260 board.
2005-07-23 10:37:35 -05:00
wdenk
ba91e26a19 Patch by Juergen Selent, 17 May 2005:
Add support for Funkwerk VoVPN gateway module.
2005-05-30 23:55:42 +00:00
wdenk
e2ffd59b4d * Code cleanup, mostly for GCC-3.3.x
* Cleanup confusing use of CONFIG_ETH*ADDR - ust his only to
  pre-define a MAC address; use CONFIG_HAS_ETH* to enable support for
  additional ethernet addresses.

* Cleanup drivers/i82365.c - avoid duplication of code

* Fix bogus "cannot span across banks" flash error message

* Add support for CompactFlash for the CPC45 Board.
2004-12-31 09:32:47 +00:00
stroese
b7eaad8134 use same spacing for "NAND:" puts 2004-12-16 17:53:17 +00:00
wdenk
9d5028c2f7 * Update for AT91RM9200DK and CMC_PU2 boards:
- Enable booting directly from flash
  - fix CMC_PU2 flash driver

* Fix mkimage usage message
2004-11-21 00:06:33 +00:00
wdenk
983fda8391 Patch by TsiChung Liew, 23 Sep 2004:
- add support for MPC8220 CPU
- Add support for Alaska and Yukon boards
2004-10-28 00:09:35 +00:00
wdenk
03f5c55021 Patches by Jon Loeliger, 24 Aug 2004:
- Add support for the MPC8541 and MPC8555 CDS boards
- Cleanup eth?addr handling: make dependent on CONFIG_ETH?ADDR
2004-10-10 21:21:55 +00:00
wdenk
66ca92a5ba * Patch by Yuli Barcohen, 13 Jul 2004:
Allow clock setting on MPC866/MPC885 series chips according to
  environment variable `cpuclk'

* Patch by Yuli Barcohen, 20 Apr 2004:
  Remove unnecessary redefine of CPM_DATAONLY_SIZE for MPC826x
2004-09-28 17:59:53 +00:00
wdenk
7ca202f566 Add support for IDS "NC650" board 2004-08-28 22:45:57 +00:00
wdenk
281e00a3be * Code cleanup
* Patch by Sascha Hauer, 28 Jun:
  - add generic support for Motorola i.MX architecture
  - add support for mx1ads, mx1fs2 and scb9328 boards

* Patches by Marc Leeman, 23 Jul 2004:
  - Add define for the PCI/Memory Buffer Configuration Register
  - corrected comments in cpu/mpc824x/cpu_init.c

* Add support for multiple serial interfaces
  (for example to allow modem dial-in / dial-out)
2004-08-01 22:48:16 +00:00
wdenk
0ac6f8b749 Patch by Jon Loeliger, 17 June 2004:
Completion of the 8540ADS/8560ADS updates:
Fix some PCI and Rapid I/O memory maps,
Initialize both TSEC 1 and 2,
Initialize SDRAM
Update MAINTAINER for 85xx boards and README.mpc85xxads
2004-07-09 23:27:13 +00:00
wdenk
93f6a6771b * Patches by Richard Woodruff, 10 Jun 2004:
- fix problems with examples/stubs.c for GCC >= 3.4
  - fix problems with gd initialization

* Enable FAT filesystem support for HMI10 board
2004-07-01 20:28:03 +00:00
wdenk
979bdbc70e Fix PCI support on CPC45 board 2004-06-01 21:08:17 +00:00
wdenk
02b11f8e09 Patch by Klaus Heydeck, 12 May 2004:
Using external watchdog for KUP4 boards in mpc8xx/cpu.c;
load_sernum_ethaddr() for KUP4 boards in lib_ppc/board.c;
various changes to KUP4 board specific files
2004-05-12 22:54:36 +00:00
wdenk
e9132ea94c Clean up the TQM8xx_YYMHz configurations; allow to use the same
binary image for all clock frequencies. Implement run-time
optimization of flash access timing based on the actual bus
frequency.
2004-04-24 23:23:30 +00:00
wdenk
7abf0c5886 * Patch by Dan Malek, 07 Apr 2004:
- Add support for RPC/STx GP3, Motorola 8560 board
  - Update 85xx TSEC driver so it searches MII for first available PHY
    and uses that one.
  - Add functions to support console MII commands.

* Patch by Tolunay Orkun, 07 Apr 2004:
  Move  initialization of bi_iic_fast[]
  from board_init_f() to board_init_r()

* Patch by Yasushi Shoji, 07 Apr 2004:
  Cleanup microblaze port

* Patch by Sangmoon Kim, 07 Apr 2004:
  Add auto SDRAM module detection for Debris board
2004-04-18 21:45:42 +00:00
wdenk
04a85b3b36 * Patches by Pantelis Antoniou, 30 Mar 2004:
- add auto-complete support to the U-Boot CLI
  - add support for NETTA and NETPHONE boards; fix NETVIA board

* Patch by Yuli Barcohen, 28 Mar 2004:
  - Add support for MPC8272 family including MPC8247/8248/8271/8272
  - Add support for MPC8272ADS evaluation board (another flavour of MPC8260ADS)
  - Change configuration method for MPC8260ADS family
2004-04-15 18:22:41 +00:00
wdenk
17d704eb95 Cleanup for release 1.1.0 2004-04-10 20:43:50 +00:00
wdenk
7e780369e4 * Patch by Mark Jonas: Remove config.tmp files only when
unconfiguring the board

* Adapt RMU board for bigger flash memory

* Test fix for ethernet problems on MPC5200
2004-04-08 22:31:29 +00:00
wdenk
0608e04da9 * Patch by Klaus Heydeck, 13 Mar 2003:
Add support for KUP4X Board
2004-03-25 19:29:38 +00:00
wdenk
eeb1b77b7d * Patch by Pierre Aubert, 18 Mar 2004:
- Unify video mode handling for Chips & Technologies 69000 Video
    chip and Silicon Motion SMI 712/710/810 Video chip
  - Add selection of the video output (CRT or LCD) via 'videoout'
    environment variable for the Silicon Motion
  - README update

* Patch by Pierre Aubert, 18 Mar 2004:
  include/common.h typo fix

* Patches by Tolunay Orkun, 17 Mar 2004:
  - Add support for bd->bi_iic_fast[] initialization via environment
    variable "i2cfast" (CONFIG_I2CFAST)
  - Add "i2cfast" u-boot environment variable support for csb272
2004-03-23 22:53:55 +00:00
wdenk
109c0e3ad3 * Patch by Phillippe Robin, 16 Mar 2004:
avoid dereferencing NULL pointer in lib_arm/armlinux.c

* Patch by Stephen Williams, 15 Mar 2004:
  Fix CONFIG_SERIAL_SOFTWARE_FIFO documentation

* Patch by Tolunay Orkun, 15 Mar 2004:
  Initialize bi_opbfreq to real OPB frequency via get_OPB_freq()

* Patch by Travis Sawyer, 15 Mar 2004:
  Update CREDITS & MAINTAINERS files for PPC440GX & Ocotea port
2004-03-23 21:43:07 +00:00