Commit graph

12205 commits

Author SHA1 Message Date
Adam Ford
b9b500b0f9 Convert CONFIG_OMAP_USB_PHY to Kconfig
This converts the following to Kconfig:
   CONFIG_OMAP_USB_PHY

Signed-off-by: Adam Ford <aford173@gmail.com>
2018-01-22 16:43:30 -05:00
Adam Ford
3b9e2a2520 Convert CONFIG_TWL4030_USB to Kconfig
This converts the following to Kconfig:
   CONFIG_TWL4030_USB

Signed-off-by: Adam Ford <aford173@gmail.com>
2018-01-22 16:43:30 -05:00
Adam Ford
26410c1517 Convert CONFIG_DAVINCI_SPI to Kconfig
This converts the following to Kconfig:
   CONFIG_DAVINCI_SPI

Signed-off-by: Adam Ford <aford173@gmail.com>
2018-01-22 16:43:30 -05:00
Adam Ford
e13a9dc370 Convert CONFIG_USB_MUSB_HCD et al to Kconfig
This converts the following to Kconfig:
   CONFIG_USB_MUSB_HCD
   CONFIG_USB_MUSB_UDC
   CONFIG_USB_DAVINCI
   CONFIG_USB_OMAP3
   CONFIG_USB_DA8XX
   CONFIG_USB_AM35X

Signed-off-by: Adam Ford <aford173@gmail.com>
2018-01-22 16:43:29 -05:00
Adam Ford
86362221fc Convert CONFIG_USB_MUSB_OMAP2PLUS et al to Kconfig
This converts the following to Kconfig:
   CONFIG_USB_MUSB_OMAP2PLUS
   CONFIG_USB_MUSB_AM35X
   CONFIG_USB_MUSB_DSPS
   CONFIG_USB_MUSB_PIO_ONLY

Signed-off-by: Adam Ford <aford173@gmail.com>
2018-01-22 16:43:29 -05:00
Giulio Benetti
3900b45125 sunxi: Fix display timing flags
flags member of struct timing was not initialized,
this took to unpredictable behaviour of display flags,
such DISPLAY_FLAGS_HSYNC_HIGH instead of _LOW etc.

Init timing->flags = 0

Signed-off-by: Giulio Benetti <giulio.benetti@micronovasrl.com>
Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Reviewed-by: Jagan Teki <jagan@openedev.com>
2018-01-22 13:53:08 +05:30
Benoît Thébaudeau
b9b4f146c9 mmc: fsl_esdhc: Fix i.MX53 eSDHCv3 clock
Commit 4f425280fa ("mmc: fsl_esdhc: Allow all supported prescaler
values") made it possible to set SYSCTL.SDCLKFS to 0 in SDR mode on
i.MX, thus bypassing the SD clock frequency prescaler, in order to be
able to get higher SD clock frequencies in some contexts. However, that
commit missed the fact that this value is illegal on the eSDHCv3
instance of the i.MX53. This seems to be the only exception on i.MX,
this value being legal even for the eSDHCv2 instances of the i.MX53.

Fix this issue by changing the minimum prescaler value for the single
instance of the i.MX53 eSDHCv3 controller.

Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau.dev@gmail.com>
Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
2018-01-22 14:17:13 +09:00
Jaehoon Chung
9546eb92cb mmc: fix the wrong disabling clock
When power is off, clock is not disabling.
Because it's passed to 1, mmc->clock should be set to f_min value.
Some drivers can't initialize the eMMC/SD card with current status.

This patch is to fix the disabling clock value to 0.

Fixes: 2e7410d76a ("mmc: disable the mmc clock during power off")

Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
Reviewed-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
Tested-by: Guillaume GARDET <guillaume.gardet@free.fr>
Tested-by: Anand Moon <linux.amoon@gmail.com>
2018-01-22 14:15:34 +09:00
Masahiro Yamada
61f2e5ee12 mmc: sdhci: change data transfer failure into debug message
During the tuning, drivers repeat data transfer, changing timing
parameters in the controller hardware.  So, the tuning commands
(CMD19 for SD, CMD21 for eMMC) fail, and this is not a problem
at all.

Showing "Error detected..." in normal operation just make users
upset.  This should not be shown.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-01-22 14:11:58 +09:00
Masahiro Yamada
dd43e2a6bd mmc: sdhci-cadence: add HS200 support
Add HS200 timing setting and the MMC tuning callback.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
2018-01-22 14:11:58 +09:00
Masahiro Yamada
4041bf7f8a mmc: sdhci-cadence: call mmc_of_parse()
This is needed to parse more capabilities such as mmc-hs200-1_8v.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-01-22 14:11:58 +09:00
Masahiro Yamada
954a963146 mmc: sdhci-cadence: use bitfield access macros for cleanup
This driver is a counterpart from the one in Linux.  Follow the
clean-up I did in Linux.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-01-22 14:11:58 +09:00
Masahiro Yamada
be165fbbf1 mmc: sdhci: do not overwrite host_caps in sdhci_setup_cfg()
This line overwrites host_cap that has been set by drivers and/or
helpers like mmc_of_parse().  Accumulate capabilities flags.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-01-22 14:11:58 +09:00
Masahiro Yamada
4b28f7bc93 mmc: let mmc_of_parse() fail for insane bus-width value
You must fix your DT if it specifies insane bus-width, for example,
  bus-width = <3>;

debug() is not displayed in usual configuration, so people will not
even notice weirdness.  Use dev_err() instead, then let it fail.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-01-22 14:11:58 +09:00
Masahiro Yamada
c42ee367fd mmc: do not overwrite cfg->f_max if "max-frequency" if missing
mmc_of_parse() in U-Boot is a pussy helper; it sets cfg->f_max to
52MHz even if DT does not provide "max-frequency" at all.  This can
overwrite cfg->f_max that may have been set to a reasonable default.

As the DT binding says, "max-frequency" is an optional property.
Do nothing if DT does not specify it.  This is the behavior of
mmc_of_parse() in Linux.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-01-22 14:11:58 +09:00
Masahiro Yamada
3ab48f6223 dm: add dev_read_u32()
dev_read_u32_default() always returns something even when the property
is missing.  So, it is impossible to do nothing in the case.  One
solution is to use ofnode_read_u32() instead, but adding dev_read_u32()
will be helpful.

BTW, Linux has an equvalent function, device_property_read_u32();
it is clearer that it reads a property.  I cannot understand the
behavior of dev_read_u32() from its name.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-01-22 14:11:58 +09:00
Mario Six
29d11b8838 core: Make device_is_compatible live-tree compatible
Judging from its name and parameters, device_is_compatible looks like it
is compatible with a live device tree, but it actually isn't.

Make it compatible with a live device tree.

Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Mario Six <mario.six@gdsys.cc>
2018-01-21 10:01:02 -07:00
Mario Six
147c607448 core: Add {ofnode, dev}_translate_address functions
Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Mario Six <mario.six@gdsys.cc>
2018-01-21 10:01:02 -07:00
Mario Six
83a462a5e3 core: read: Fix style violations
There are some whitespace-related style violations in read.c; fix those.

Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Mario Six <mario.six@gdsys.cc>
2018-01-21 10:01:02 -07:00
Mario Six
51db287a14 core: ofnode: Fix style violations
There are some style violations in ofnode.c; fix those.

Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Mario Six <mario.six@gdsys.cc>
2018-01-21 10:01:02 -07:00
Mario Six
fcca9db819 clk: Makefile: Sort entries alphabetically
The Makefile entries in the clk driver directory were not alphabetically
sorted. Correct this.

Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Mario Six <mario.six@gdsys.cc>
2018-01-21 10:01:02 -07:00
Mario Six
7fe1b063d8 clk: Remove superfluous gd declarations
The clk uclass was converted to support a live device tree recently,
hence the global data pointer declarations are no longer needed.

Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Mario Six <mario.six@gdsys.cc>
2018-01-21 10:01:02 -07:00
Mario Six
e2db9e7a06 clk: clk_fixed_rate: Fix style violation
Fix a mis-indented function call in clk_fixed_rate.c

Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Mario Six <mario.six@gdsys.cc>
2018-01-21 10:01:02 -07:00
Mario Six
268453be7c clk: clk-uclass: Fix style violations
checkpatch.pl complains that the clk_ops structures used in clk-uclass.c
ought to be const, so we mark them as const.

Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Mario Six <mario.six@gdsys.cc>
2018-01-21 10:01:02 -07:00
Mario Six
286ede6515 drivers: core: Add translation in live tree case
The function dev_read_addr calls ofnode_get_addr_index in the live tree
case, which does not apply bus translations to the address read from the
device tree. This results in illegal addresses on boards that rely on
bus translations being applied.

Fix this situation by applying bus translations in the live tree case as
well.

Signed-off-by: Mario Six <mario.six@gdsys.cc>
Tested-by: Stephen Warren <swarren@nvidia.com>
2018-01-21 10:01:02 -07:00
Tom Rini
557767ed29 Merge git://git.denx.de/u-boot-marvell 2018-01-20 08:39:47 -05:00
Tom Rini
c4cb6e64bf Merge git://git.denx.de/u-boot-arc 2018-01-19 16:07:36 -05:00
Patrice Chotard
ae74de0dfd serial: stm32: Rename serial_stm32x7.c to serial_stm32.c
Now this driver is used across stm32f4, stm32f7 and stm32h7
SoCs family, give it a generic name.

Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
Reviewed-by: Vikas Manocha <vikas.manocha@st.com>
2018-01-19 15:49:32 -05:00
Tom Rini
bb2277b3ee GPIO: tca642x: Rework to not include commands in SPL
The command portion of the GPIO driver can only be used in full SPL so
re-work to guard the command related portions and mark it as static.

Cc: Dan Murphy <dmurphy@ti.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
2018-01-19 15:49:29 -05:00
Tom Rini
0d097b774d GPIO: pca953x: Rework to not include commands in SPL
The command portion of the GPIO driver can only be used in full SPL so
re-work to guard the command related portions and mark it as static.

Cc: Bin Meng <bmeng.cn@gmail.com>
Cc: Simon Glass <sjg@chromium.org>
Cc: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2018-01-19 15:49:29 -05:00
Tero Kristo
72b7af5a04 drivers: dma: ti-edma3: add support for memory fill
Add support for simple memory fill operation. With large data sizes
it is much faster to use EDMA for memory fill rather than CPU.

Signed-off-by: Tero Kristo <t-kristo@ti.com>
2018-01-19 15:49:25 -05:00
Kishon Vijay Abraham I
29171dcfaa mmc: omap_hsmmc: Fix incorrect bit operations for disabling a bit
omap_hsmmc driver uses "|" in a couple of places for disabling a bit.
While it's okay to use it in "mmc_reg_out" (since mmc_reg_out has a
_mask_ argument to take care of resetting a bit), it's incorrectly used
for resetting flags in "omap_hsmmc_send_cmd".

Fix it here by using "&= ~()" to reset a bit.

Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
2018-01-19 15:49:23 -05:00
Kishon Vijay Abraham I
866bb98468 mmc: omap_hsmmc: Enable Auto command (CMD12) enable
Instead of sending STOP TRANSMISSION command from MMC core, enable
the auto command feature so that the Host Controller issues CMD12
automatically when last block transfer is completed.

Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
2018-01-19 15:49:23 -05:00
Kishon Vijay Abraham I
f0d53e88a6 mmc: omap_hsmmc: Add support for DMA (ADMA2)
The omap hsmmc host controller can have the ADMA2 feature. It brings better
read and write throughput.
On most SOC, the capability is read from the hl_hwinfo register. On OMAP3,
DMA support is compiled out.

Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
2018-01-19 15:49:17 -05:00
Chris Packham
672e559830 ddr: marvell: update ddr controller init and freq
Update the calculation for tWR and tPD. This improves the DDR refresh
interval and brings the initialization into line with the binary blobs
currently being supplied by Marvell.

Signed-off-by: Chris Packham <judge.packham@gmail.com>
Signed-off-by: Stefan Roese <sr@denx.de>
2018-01-19 16:30:29 +01:00
Chris Packham
8bddf678db ddr: marvell: update additional ODT setting
The RD_SAMPLE_DELAY field is 5 bits so it needs to be masked with 0x1f
instead of 0xf. Rather than checking the read sample delay for all DDR
chip selects use the values for the chip selects that are actually
configured. Finally continue searching for the max_phase value even if the
current read_sample is the same as the max_read_sample.

Signed-off-by: Chris Packham <judge.packham@gmail.com>
Signed-off-by: Stefan Roese <sr@denx.de>
2018-01-19 16:30:29 +01:00
Chris Packham
2efd27f76a ddr: marvell: use correct TREFI value
The ternary operation had the HIGH/LOW values the
wrong way round. Update it to use the correct value.

Signed-off-by: Chris Packham <judge.packham@gmail.com>
Signed-off-by: Stefan Roese <sr@denx.de>
2018-01-19 16:30:29 +01:00
Chris Packham
dbaf09590d ddr: marvell: only assert M_ODT[0] on write for a single CS
When using only a single DDR chip select only assert M_ODT[0] on write.
Do not assert it on read and do not assert M_ODT[1] at all. Also set
tODT_OFF_WR to 0x9 which contradicts the recommendation from the
functional spec but is what Marvell's binary training blob does and
seems to give better results when ODT is active during writes.

Signed-off-by: Chris Packham <judge.packham@gmail.com>
Signed-off-by: Stefan Roese <sr@denx.de>
2018-01-19 16:30:29 +01:00
Eugeniy Paltsev
320c8a1a86 ARC: HSDK: CGU: Add 'Hz' when printing clock frequency
Add 'Hz' when printing clock frequency in error messages.

Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
2018-01-19 17:59:35 +03:00
Eugeniy Paltsev
f6d7812d8d ARC: HSDK: CGU: Use plat data instead of priv data
Correctly allocate hsdk_cgu_clk private data structure using
priv_auto_alloc_size instead of platdata_auto_alloc_size.

Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
2018-01-19 17:59:35 +03:00
Eugeniy Paltsev
075cbae163 ARC: HSDK: CGU: Update AXI, TUN, ARC clock options
Update default AXI, TUN, ARC clock set options:
instead of changing only IDIV divider settings adjust also domain PLL
settings.

Add support of TUN_ROM and TUN_PWM clocks (subclocks of TUNN_PLL)

Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
2018-01-19 17:59:35 +03:00
Jean-Jacques Hiblot
741726ae4c Revert "omap_hsmmc: update struct hsmmc to accommodate omap3 from DT"
This reverts commit 46831c1a4c.
This reserved area at the beginning of struct hsmm, will be used later to
support ADMA

Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
2018-01-18 22:04:21 -05:00
Tom Rini
086ebcd40e Merge git://git.denx.de/u-boot-fsl-qoriq 2018-01-17 13:48:35 -05:00
Peng Fan
fb0128736b i2c: mxc_i2c: Use or operation
The operation should be OR, not BIT OR.

Signed-off-by: Peng Fan <peng.fan@nxp.com>
Cc: Heiko Schocher <hs@denx.de>
Cc: Stefano Babic <sbabic@denx.de>
2018-01-16 06:59:39 +01:00
Peng Fan
0074d4bf2d i2c: lpi2c: do not add 4 for bus seq
The number 4 is dedicated on i.MX7ULP, but lpi2c will be reused on i.MX8,
4 is not valid. The seq number could be configured by alias node.

The following patch will use i2c4 as the begin for i.MX7ULP.

Signed-off-by: Peng Fan <peng.fan@nxp.com>
2018-01-16 06:58:59 +01:00
Tom Rini
fdb6c3232f Merge git://git.denx.de/u-boot-net 2018-01-15 19:01:23 -05:00
Tom Rini
8e9801c283 Merge git://git.denx.de/u-boot-imx 2018-01-15 16:44:18 -05:00
Jorge Ramirez-Ortiz
0689eb7470 db410c: replace reset driver with psci
this should be the norm for armv8 platforms.

Signed-off-by: Jorge Ramirez-Ortiz <jorge.ramirez-ortiz@linaro.org>
2018-01-15 16:29:03 -05:00
Jorge Ramirez-Ortiz
e0cc0b6c6d db820c: enable pmic gpios for pm8994
Signed-off-by: Jorge Ramirez-Ortiz <jorge.ramirez-ortiz@linaro.org>
2018-01-15 16:29:02 -05:00
Sriram Dash
a2bbfc5480 serial: lpuart: Proper device identification
Identify and distinguish between platform device type of MX7ULP
and LS1021A.

This is a fix to commit 7edf5c45("serial: lpuart: add i.MX7ULP
support").

Signed-off-by: Sriram Dash <sriram.dash@nxp.com>
Acked-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: York Sun <york.sun@nxp.com>
2018-01-15 12:44:09 -08:00
Zhao Qiang
1e2d2597a6 phy: atheros: set auto-negotiation for AR8021
Signed-off-by: Zhao Qiang <qiang.zhao@nxp.com>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2018-01-15 12:05:27 -06:00
Nobuhiro Iwamatsu
dcd18eaf61 net: sh-eth: Add to Kconfig and convert
This adds SH_ETHER to drivers/net/Kconfig and convert to Kconfig.

Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2018-01-15 12:05:26 -06:00
Nobuhiro Iwamatsu
aae5d237b9 net: sh-eth: Fix misaligned cache operation warning
When we using network on board using sh-eth, it prints a lot of
"CACHE: Misaligned operation at range" messages.
This commit fixes this problem.

Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2018-01-15 12:05:26 -06:00
Nobuhiro Iwamatsu
fbfb511548 net: sh-eth: Change read/write() param to struct sh_eth_info
This changes Change structure used in sh_eth_read and sh_eth_write function
from struct sh_eth_dev to struct sh_eth_info. This is necessary to convert
to Driver Model.

Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2018-01-15 12:05:25 -06:00
Nobuhiro Iwamatsu
9b5f9ecf6e net: sh-eth: Remove bd_t from sh_eth_config()
bd_t is not used in sh_eth_config(). This deletes bd_t from sh_eth_config()

Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2018-01-15 12:05:24 -06:00
Nobuhiro Iwamatsu
dc14867d0f net: sh-eth: Fix coding style checked by checkpatch.pl
This fixes the chord style checked by checkpatch.pl.
Details of change details are as follows:

 - Fix typo
    Change from alligned to aligned.
 - Remove whitespace before ','
 - Add spaces preferred around that '|'
 - Fix missing a blank line after declarations
 - Remove space after a cast declaration
 - Fix format of block comments
 - Add a blank line after function/struct/union/enum declarations

Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2018-01-15 12:05:24 -06:00
Florian Fainelli
f3d78fbfaf net: phy: b53: Add b53_reg read/write commands
Add a b53_reg read/write command which allows inspecting the switch
registers. Because the Broadcom BCM53xx registers have different sizes,
we need to split the accesses in 8, 16, 32, 48 or 64 bits to obtain
expected results.

Reviewed-by: Stefan Roese <sr@denx.de>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2018-01-15 12:05:22 -06:00
Florian Fainelli
7a9ca9db40 net: designware: Pad small packets
Make sure that we pad small packets to a minimum length of 60 bytes
(without FCS). This is necessary to interface with Ethernet switches
that will reject RUNT frames unless padded correctly.

Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2018-01-15 12:05:21 -06:00
Florian Fainelli
137963d71a net: phy: Add Broadcom BCM53xx switch driver
Add a minimalistic Broadcom BCM53xx (roboswitch) switch driver similar
to the Marvell MV88E617x. This takes care of configuring the minimum
amount out of the switch hardware such that each user visible port
(configurable) and the CPU port can forward packets between each other
while preserving isolation with other ports.

This is useful for e.g: the Lamobo R1 board featuring a Broadcom
BCM53125 switch.

Reviewed-by: Stefan Roese <sr@denx.de>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2018-01-15 12:05:21 -06:00
Patrice Chotard
ba1f966725 net: designware: add clock support
This implementation manages several clocks, disable and
free all of them in case of error during probe and in remove
callback.

Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2018-01-15 12:05:20 -06:00
Patrice Chotard
ea8cd652a7 dm: core: add missing dev_count_phandle_with_args()
Add missing dev_count_phandle_with_args() to avoid
compilation issue.

Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
Reviewed-by: Joe Hershberger <joe.hershberger@ni.com>
2018-01-15 12:05:19 -06:00
Jason Brown
32ac8b0bba net: mvneta - Fixed recv() when multiple packets have arrived.
This patch fixes a problem in the mvneta driver where if more than
one packet arrives between calls to mvneta_recv(), the additional
descriptors will be marked as free even though only one descriptor
has been read and processed from the receive queue.  This causes
the additional packet(s) to be delayed until the next packet arrives.
>From this point on all packets will be delayed because the receive
queue will contain unprocessed packets but the hardware shows no
busy descriptors.

Signed-off-by: Jason Brown <jason.brown@apcon.com>
Reviewed-by: Stefan Roese <sr@denx.de>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2018-01-15 12:05:19 -06:00
Chris Brandt
33bab10457 net: miiphybb: fix casting error
Since the return value is a signed int, if the leading MSB of rdreg is a 1,
it will get signed extended and will return a negative value which is an
error even though we read the correct value.

Fixes: dfcc496ed7 ("net: mii: Changes not made by spatch")
Signed-off-by: Chris Brandt <chris.brandt@renesas.com>
Acked-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2018-01-15 12:05:17 -06:00
Chris Brandt
f6ac626c8a net: sh-eth: remove sh_eth_offset_rz table
First, this table could never be included in the build anyway because
SH_ETH_TYPE_RZ is not defined until later in the file.
Second, the register PIR was missing, so PHY MDIO never worked.
Third, after adding the PIR register, the table is EXACTLY the same as
sh_eth_offset_gigabit, so there is no value to it.

Therefore, just delete it use the gigabit one.

Signed-off-by: Chris Brandt <chris.brandt@renesas.com>
Acked-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2018-01-15 12:05:17 -06:00
Chris Brandt
5ad565b0d1 net: sh-eth: fix inl and outl definitions
The macros inl and outl maybe already be defined from file
arch/arm/include/asm/io.h so there may be no reason to define them.
And if you do try defined them here, you get a redefined complier warning.

Signed-off-by: Chris Brandt <chris.brandt@renesas.com>
Acked-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2018-01-15 12:05:16 -06:00
Lukasz Majewski
ce27eb9b40 net: phy: marvell: Add functions to read PHY's extended registers
This commit allows extended Marvell registers to be read with:

foo > mdio rx FEC 3.10
Reading from bus FEC
PHY at address 0:
3.16 - 0x1063
foo > mdio wx FEC 3.10 0x1011

The above code changes the way ETH connector LEDs blink.

Signed-off-by: Lukasz Majewski <lukma@denx.de>
Reviewed-by: York Sun <york.sun@nxp.com>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2018-01-15 12:05:16 -06:00
Joe Hershberger
3cacc6a772 net: Fix buffer overrun error in netconsole
Need to not access the byte after the input_buffer.

Reported-by: Coverity (CID: 144423)
Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
2018-01-15 12:05:14 -06:00
Wilson Lee
4bf56913d0 net: macb: Add support for Xilinx Zynq SoC
Although Xilinx Zynq SoC was using MACB similar hardware. However,
U-boot MACB driver was not supporting Xilinx Zynq SoC. This patch is
to add support for the Xilinx Zynq SoC to the existing MACB network
driver.

This patch is to add Zynq GEM DMA Config, provide callback
function for different linkspeed for case of using Xilinx Zynq
Programmable Logic as GMII to RGMII converter.

This patch convert the return value to use error codes.

Signed-off-by: Wilson Lee <wilson.lee@ni.com>
Cc: Chen Yee Chew <chen.yee.chew@ni.com>
Cc: Keng Soon Cheah <keng.soon.cheah@ni.com>
Cc: Joe Hershberger <joe.hershberger@ni.com>
Cc: Wenyou Yang <wenyou.yang@atmel.com>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2018-01-15 12:05:14 -06:00
Rob Clark
f2006808f0 dm: core: parse chosen node
This is the node that would contain, for example, the framebuffer setup
by an earlier stage.

Signed-off-by: Rob Clark <robdclark@gmail.com>
2018-01-15 11:35:38 -05:00
Jorge Ramirez-Ortiz
210d959294 spmi: msm: display the PMIC Arb version (debug)
Signed-off-by: Jorge Ramirez-Ortiz <jorge.ramirez-ortiz@linaro.org>
2018-01-15 11:35:37 -05:00
Tom Rini
3dde8f2037 Merge git://git.denx.de/u-boot-mmc 2018-01-14 22:26:38 -05:00
Peng Fan
db359efd59 mmc: fsl_esdhc: Fix eMMC 1.8v setting issue
Current USDHC driver will reset VSELECT to 0 (3.3v) during mmc init,
then set to 1 for 1.8v eMMC I/O. When booting from eMMC, since ROM has
already set VSELECT to 1.8v before running the u-boot. This reset in
USDHC driver causes a short 2.2v pulse on CMD pin.

Fix this issue by not reset VSELECT to 0 when 1.8v flag is set.

Signed-off-by: Ye Li <ye.li@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
2018-01-13 00:08:44 +09:00
Tom Rini
8c0bb85824 power: Rearrange code to guard power command with CONFIG_SPL_BUILD guard
In order to discard this code when unused in SPL we need to guard the
command with a check for CONFIG_SPL_BUILD and we rearrange the code
slightly to make this cleaner.

Cc: Jaehoon Chung <jh80.chung@samsung.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
2018-01-13 00:07:57 +09:00
Koen Vandeputte
f57263ee9b drivers: pci: imx: fix enumeration logic error
By default, the subordinate is set equally to the secondary bus (1) when
the RC boots, and does not alter afterwards.

This means that theoretically, the highest bus reachable downstream is
bus 1.

Force the PCIe RC subordinate to 0xff, otherwise no downstream
devices will be detected behind bus 1 if the booting OS does not allow
enumerating a higher busnr than the subordinate value of the primary
bus.

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
2018-01-12 14:28:04 +01:00
Peng Fan
afe8e1b033 spi: fsl_qspi: support i.MX6UL/6ULLL/7D
The QSPI module on i.MX7D is modified from i.MX6SX. The module used on
i.MX6UL/6ULL is reused from i.MX7D. They share same tx buffer size.

The endianness is not set at qspi driver initialization. So if we don't
boot from QSPI, we will get wrong endianness when accessing from AHB
address directly.

Add the compatible entry for 6ul/7d.

Signed-off-by: Peng Fan <peng.fan@nxp.com>
2018-01-12 14:28:04 +01:00
Peng Fan
67b71df277 pci: imx: request gpio before use
Before use GPIO, we need to request gpio first. Free gpio after use.

Signed-off-by: Peng Fan <peng.fan@nxp.com>
Cc: Stefano Babic <sbabic@denx.de>
Cc: Fabio Estevam <fabio.estevam@nxp.com>
Reviewed-by: Stefano Babic <ssbabic@denx.de>
2018-01-12 14:28:04 +01:00
Peng Fan
8df42bee0e misc: mxc_ocotp: check fuse word before programming on i.MX7ULP
On i.MX7ULP, the fuse words (except bank 0 and 1) only supports to
write once, because they use ECC mode. Multiple writes may damage
the ECC value and cause a wrong fuse value decoded when reading.
This patch adds a checking before the fuse word programming, only
can write when the word value is 0.

Signed-off-by: Ye Li <ye.li@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
2018-01-12 14:28:04 +01:00
Jean-Jacques Hiblot
b7a6e2c9c3 mmc: remove hc_wp_grp_size from struct mmc if not needed
hc_wp_grp_size is needed only if hardware partitionning is used.
On ARM removing it saves about 30 bytes of code space.

Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
2018-01-12 18:11:24 +09:00
Jean-Jacques Hiblot
173c06dfcc mmc: don't read the size of eMMC enhanced user data area in SPL
This information is only used by the "mmc info" command.
On ARM removing this information from SPL saves about 140 of code space.

Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
2018-01-12 18:11:24 +09:00
Jean-Jacques Hiblot
e6fa5a5461 mmc: compile out erase and write mmc commands if write operations are not enabled
Also remove erase_grp_size and write_bl_len from struct mmc as they are
not used anymore. On ARM, removing them saves about 100 bytes of code
space in SPL.

Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
2018-01-12 18:11:24 +09:00
Jean-Jacques Hiblot
5b2e72f327 mmc: read ssr only if MMC write support is enabled
The content of ssr is useful only for erase operations.
on ARM, removing sd_read_ssr() saves around 300 bytes.

Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
2018-01-12 18:11:24 +09:00
Jean-Jacques Hiblot
d6400c3f85 mmc: add a Kconfig option to enable the support for MMC write operations
This allows using CONFIG_IS_ENABLED(MMC_WRITE) to compile out code
needed only if write support is required.
The option is added for u-boot and for SPL

Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
2018-01-12 18:11:24 +09:00
Jean-Jacques Hiblot
58a6fb7b04 mmc: reworked version lookup in mmc_startup_v4
Using a table versus a switch() structure saves a bit of space

Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
2018-01-12 18:11:24 +09:00
Jean-Jacques Hiblot
baef2070a4 mmc: compile out more code if support for UHS and HS200 is not enabled
Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
2018-01-12 18:11:23 +09:00
Jean-Jacques Hiblot
9b79dbd201 mmc: atmel: when sending a data command, use the provided block size
struct mmc_data contains the block size to use for the data transfer.
Use this information instead of using the default value or the block length
information stored in struct mmc.

Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
2018-01-12 18:11:23 +09:00
Jean-Jacques Hiblot
49f89252ed dm: mmc: sandbox: Update SD card emulation
The SDcard initialization procedure does a few more things than it did earlier:
* switch the bus width even for 1-bit bus width
* check that speed has been properly set (in resp[4] of SD_CMD_SWITCH_FUNC)

Update the SD simulator to handle those requests gracefully.

Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
2018-01-12 18:11:04 +09:00
Jean-Jacques Hiblot
cf17789e07 mmc: make optional the support for eMMC hardware partitioning
Not all boards have an eMMC and not all users have a need for this.
Allow to compile it out. By default it is still included.

Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
2018-01-12 18:11:04 +09:00
Jean-Jacques Hiblot
f99c2efe56 mmc: make UHS and HS200 optional
Supporting USH and HS200 increases the code size as it brings in IO voltage
control, tuning and fatter data structures.
Use Kconfig configuration to select which of those features should be
built in.

Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
2018-01-12 18:11:04 +09:00
Jean-Jacques Hiblot
d8e3d42089 mmc: convert most of printf() to pr_err() and pr_warn()
This allows to compile out the log message by tweaking the LOGLEVEL.

Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
2018-01-12 18:11:04 +09:00
Jean-Jacques Hiblot
f7d5dffc65 mmc: don't use malloc_cache_aligned()
Not using this function reduces the size of the binary. It's replaces by
a standard malloc() and the alignment requirement is handled by an
intermediate buffer on the stack.

Also make sure that the allocated buffer is freed in case of error.

Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
2018-01-12 18:11:04 +09:00
Jean-Jacques Hiblot
1de06b9fa5 mmc: fix for old MMCs (below version 4)
The ext_csd is allocated only for MMC above version 4. The compare will
crash or fail for older MMCs.

Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
2018-01-12 18:11:04 +09:00
Jean-Jacques Hiblot
1da8eb598f mmc: all hosts support 1-bit bus width and legacy timings
Make sure that those basic capabilities are advertised by the host.

Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
Reviewed-by: Lukasz Majewski <lukma@denx.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
2018-01-12 18:11:04 +09:00
Jean-Jacques Hiblot
00e446fa04 mmc: Fixed a problem with old sd or mmc that do not support High speed
As the legacy modes were not added to the list of supported modes, old
cards that do not support other modes could not be used.

Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
Reviewed-by: Lukasz Majewski <lukma@denx.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
2018-01-12 18:11:04 +09:00
Jean-Jacques Hiblot
7abff2c3b3 dm: mmc: update mmc_of_parse()
* convert to livetree API
* don't fail because of an invalid bus-width, instead default to 1-bit.
* recognize 1.2v DDR and 1.2v HS200 flags

Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
2018-01-12 18:11:04 +09:00
Jean-Jacques Hiblot
52d241dfba mmc: dump card and host capabilities if debug is enabled
This is a useful information while debugging the initialization process or
performance issues.
Also dump this information with the other mmc info if the verbose option
is selected

Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
2018-01-12 18:11:04 +09:00
Jaehoon Chung
ef1614acf8 mmc: meson_gx_mmc: fix the complie error
mmc_set_clock() is changed.
This patch is for fixing complie error.

Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
2018-01-12 18:11:04 +09:00
Kishon Vijay Abraham I
9215ef5ed5 dm: mmc: Add a library function to parse generic dt binding
Add a new function to parse host controller dt node and
set mmc_config. This function can be used by mmc controller
drivers to set the generic mmc_config.
This function can be extended to set other UHS mode caps
once UHS mode support is added.

Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
2018-01-12 18:11:04 +09:00
Jean-Jacques Hiblot
9815e3ba80 mmc: add a library function to send tuning command
HS200/SDR104 requires tuning command to be sent to the card.
Add a simple function to send tuning command and to read and
compare the received data with the tuning block pattern.
This function can be used by platform driver to perform DLL
tuning.
This patch is similar to
commit 996903de92f0 ("mmc: core: add core-level function for
sending tuning commands") added in linux kernel.

Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
2018-01-12 18:11:04 +09:00
Jean-Jacques Hiblot
bc1e3272ff mmc: use the right voltage level for MMC DDR and HS200 modes
HS200 only supports 1.2v and 1.8v signal voltages. DDR52 supports 3.3v/1.8v
or 1.2v signal voltages.
Select the lowest voltage available when using those modes.

Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
2018-01-12 18:11:04 +09:00
Kishon Vijay Abraham I
83dc42271f mmc: Retry some MMC cmds on failure
With certain SD cards like Kingston 8GB/16GB UHS card, it is seen that
MMC_CMD_ALL_SEND_CID cmd fails on first attempt, but succeeds
subsequently. Therefore, retry MMC_CMD_ALL_SEND_CID cmd a few time
as done in Linux kernel.
Similarly, it is seen that MMC_CMD_SET_BLOCKLEN may fail on first
attempt, therefore retry this cmd a few times as done in kernel.

To make it clear that those are optionnal workarounds, a new Kconfig
option 'MMC_QUIRKS' is added (enabled by default).

Signed-off-by: Vignesh R <vigneshr@ti.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
2018-01-12 18:11:04 +09:00
Jean-Jacques Hiblot
01298da31d mmc: Change mode when switching to a boot partition
Boot partitions do not support HS200. Changing to a lower performance mode
is required to access them.
mmc_select_mode_and_width() and sd_select_mode_and_width() are modified to
make it easier to call them outside of the initialization context.

Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2018-01-12 18:11:04 +09:00
Jean-Jacques Hiblot
04a2ea248f mmc: disable UHS modes if Vcc cannot be switched on and off
If a power cycle cannot be done on Vcc, it is safer not to try the UHS
modes because we wouldn't be able to recover from an error occurring
during the UHS initialization.

Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
2018-01-12 18:11:04 +09:00
Jean-Jacques Hiblot
c10b85d6c2 mmc: Add support for UHS modes
Add UHS modes to the list of supported modes, get the UHS capabilites of
the SDcard and implement the procedure to switch the voltage (UHS modes
use 1v8 IO lines)
During the voltage switch procedure, DAT0 is used by the card to signal
when it's ready. The optional card_busy() callback can be used to get this
information from the host driver.

Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2018-01-12 18:11:04 +09:00
Kishon Vijay Abraham I
634d484940 mmc: add HS200 support in MMC core
Add HS200 to the list of supported modes and introduce tuning in the MMC
startup process.

Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2018-01-12 18:11:04 +09:00
Kishon Vijay Abraham I
ec841209a7 mmc: Add a execute_tuning() callback to the mmc operations.
Tuning is a mandatory step in the initialization of SDR104 and HS200 modes.
This callback execute the tuning process.

Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
2018-01-12 18:11:04 +09:00
Kishon Vijay Abraham I
2e7410d76a mmc: disable the mmc clock during power off
There is no point in having the mmc clock enabled during
power off. Disable the mmc clock. This is similar to how it's
programmed in Linux Kernel.

Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Vignesh R <vigneshr@ti.com>
Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2018-01-12 18:11:04 +09:00
Kishon Vijay Abraham I
35f6782055 mmc: add a new mmc parameter to disable mmc clock
mmc clock has to be disabled in certain cases like during
the voltage switch sequence. Modify mmc_set_clock function
to take disable as an argument that signifies if the
clock has to be enabled or disabled.

Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
2018-01-12 18:11:04 +09:00
Kishon Vijay Abraham I
fb7c3beb51 mmc: add power cyle support in mmc core
mmc/sd specification requires vdd to be disabled for 1 ms
and then enabled again during power cycle. Add a
function in mmc core to perform power cycle and set
the io signal to it's initial state.

Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
2018-01-12 18:11:04 +09:00
Jean-Jacques Hiblot
318a7a576b mmc: Add a new callback function to perform the 74 clocks cycle sequence
Add a new callback function *send_init_stream* which start a sequence of
at least 74 clock cycles.
The mmc core uses *mmc_send_init_stream* in order to invoke the callback
function. This will be used during power cycle where the specification
requires such a sequence after power up.

Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
2018-01-12 18:11:04 +09:00
Kishon Vijay Abraham I
aff5d3c83f mmc: Enable signal voltage to be selected from mmc core
Add a new function *mmc_set_signal_voltage* in mmc core
which can be used during mmc initialization to select the
signal voltage. Platform driver should use the set_ios
callback function to select the signal voltage.

Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
2018-01-12 18:11:04 +09:00
Kishon Vijay Abraham I
2a4d212f71 mmc: make mmc_set_ios() return status
set_ios callback has a return value of 'int' but the mmc_set_ios()
function ignore this. Modify mmc_set_ios() and the callers of mmc_set_ios() to
to return the error status.

Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2018-01-12 18:11:04 +09:00
Jean-Jacques Hiblot
3862b85474 mmc: refactor MMC startup to make it easier to support new modes
The MMC startup process currently handles 4 modes. To make it easier to
add support for more modes, let's make the process more generic and use a
list of the modes to try.
The major functional change is that when a mode fails we try the next one.
Not all modes are tried, only those supported by the card and the host.

Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2018-01-12 18:11:04 +09:00
Jean-Jacques Hiblot
d0c221fe73 mmc: refactor SD startup to make it easier to support new modes
The SDcard startup process currently handles only 2 modes. To make it
easier to add support for more modes, let's make the process more generic
and use a list of the modes to try.
The major functional change is that when a mode fails we try the next one.
Not all modes are tried, only those supported by the card and the host.

Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2018-01-12 18:11:04 +09:00
Jean-Jacques Hiblot
05038576e0 mmc: use mmc modes to select the correct bus speed
Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2018-01-12 18:11:04 +09:00
Jean-Jacques Hiblot
4c9d2aaa7e mmc: Add a function to dump the mmc capabilities
This adds a simple helper function to display information (bus width and
mode) based on a capability mask. Useful for debug.

Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
2018-01-12 18:11:03 +09:00
Jean-Jacques Hiblot
35f9e196f9 mmc: introduce mmc modes
no functionnal changes.
In order to add the support for the high speed SD and MMC modes, it is
useful to track this information.

Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2018-01-12 18:11:03 +09:00
Jean-Jacques Hiblot
7382e691ca mmc: add a function to read and test the ext csd (mmc >= 4)
This will be reused later in the selection of high speed and ddr modes.

Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2018-01-12 18:11:03 +09:00
Jean-Jacques Hiblot
dfda9d88e5 mmc: make ext_csd part of struct mmc
The ext csd is used for comparison many times. Keep a reference content
of the ext csd in the struct mmc to avoid reading multiple times

Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2018-01-12 18:11:03 +09:00
Jean-Jacques Hiblot
c744b6f6dc mmc: move the MMC startup for version above v4.0 in a separate function
no functionnal change. This is only to further reduce the size o
mmc_startup().

Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2018-01-12 18:11:03 +09:00
Jean-Jacques Hiblot
8ac8a26304 mmc: split mmc_startup()
No functionnal change here. The function is really big and can be split.
The part related to bus configuration are put in 2 separate functions: one
for MMC and one for SD.

Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2018-01-12 18:11:03 +09:00
Jean-Jacques Hiblot
06ec045fee mmc: dm: get the IO-line and main voltage regulators from the dts
Get a reference to the regulator devices from the dts and store them
in the struct mmc for later use.

Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
2018-01-12 18:11:03 +09:00
Heinrich Schuchardt
bb7b4ef370 mmc: sdhci: do not compare pointer to 0
data is defined as struct mmc_data *data.
So it should not be compared to 0.

Problem identified with Coccinelle.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2018-01-12 18:11:03 +09:00
Jorge Ramirez-Ortiz
713e6815d9 mmc: sdhci: don't clear SDHCI_INT_STATUS register during CMD_INHIBIT
Fixes emmc initialization regression on the db410c platform.

Clearing this register while SDHCI_PRESENT_STATE reports
SDHCI_CMD_INHIBIT leads to undefined behaviour on the db410c.

When commit 7dde50 was merged (mmc: sdhci: Wait for SDHCI_INT_DATA_END
when transferring), SDHCI transfers transitioned to wait for bit
SDHCI_INT_DATA_END before flagging transfers done.

Without this patch, the db410 platform fails to initialize its eMMC
due to all of its transfers timing out (SDHCI_INT_DATA_END is never
raised after all the blocks have been transferred).

Signed-off-by: Jorge Ramirez-Ortiz <jorge.ramirez-ortiz@linaro.org>
2018-01-12 18:11:03 +09:00
Felix Brack
339d578900 mmc: sanitize includes for DM i2c
This patch fixes some warnings when building boards that do not define
DM_I2C_COMPAT i.e. boards that entirely rely on the new i2c layer.
Signed-off-by: Felix Brack <fb@ltec.ch>
2018-01-12 18:11:03 +09:00
Suniel Mahesh
0e1746acac drivers: mmc: Avoid memory leak in case of failure
priv pointer should be freed before returning with an error value
from exynos_dwmci_get_config().

Signed-off-by: Suniel Mahesh <sunil.m@techveda.org>
Signed-off-by: Raghu Bharadwaj <raghu@techveda.org>
2018-01-12 18:11:03 +09:00
Suniel Mahesh
18e7c8f6aa drivers: mmc: Change buffer type in ALLOC_CACHE_ALIGN_BUFFER macro
__be32_to_cpu() accepts argument of type __be32. This patch changes
type of the buffer in ALLOC_CACHE_ALIGN_BUFFER macro to __be32, which
is then passed to __be32_to_cpu().
This prevents sparse build warnings.
drivers/mmc/mmc.c: warning: cast to restricted __be32

Signed-off-by: Suniel Mahesh <sunil.m@techveda.org>
Signed-off-by: Karthik Tummala <karthik@techveda.org>
2018-01-12 18:11:03 +09:00
Tom Rini
1a62f8597c Merge git://git.denx.de/u-boot-video 2018-01-11 13:43:36 -05:00
Tom Rini
6bf634223a Merge git://git.denx.de/u-boot-fsl-qoriq 2018-01-11 11:18:49 -05:00
Tom Rini
e38c66edae Merge git://git.denx.de/u-boot-usb 2018-01-11 11:18:29 -05:00
Hannes Schmelzer
8a094f508c am335x-fb: setup display PLL
The LCDC IP-core an be feed from several clock sources, one of those is
a dedicated DPLL for generating a dividable base-clock for this IP-core.

The TRM specifies the maximum input frequency for the LCCD with 200 MHz,
so we must not exceed this value with the PLL frequency (which can lock
much higher).

This patch tries every combination of multipliers and divisors of the
PLL and the IP-core itself for getting as near as possible the the
requested panel->pxl_clk.

Signed-off-by: Hannes Schmelzer <oe5hpm@oevsv.at>
Reviewed-by: Anatolij Gustschin <agust@denx.de>
2018-01-11 15:19:12 +01:00
Hannes Schmelzer
0d8a7d6fa8 am335x-fb: cosmetic: fix coding style
Signed-off-by: Hannes Schmelzer <oe5hpm@oevsv.at>
Reviewed-by: Anatolij Gustschin <agust@denx.de>
2018-01-11 15:18:28 +01:00
Hannes Schmelzer
e880a5e219 am335x-fb: cosmetic: update-copyright
Signed-off-by: Hannes Schmelzer <oe5hpm@oevsv.at>
Reviewed-by: Anatolij Gustschin <agust@denx.de>
2018-01-11 15:17:09 +01:00
Ahmed Mansour
541d57663f configs: Move SYS_DPAA_QBMAN to Kconfig
The CONFIG_SYS_DPAA_QBMAN define is used by DPAA1 freescale SOCs to
add device tree fixups that allow deep sleep in Linux. The define was
placed in header files included by a number of boards, but was not
explicitly documented in any of the Kconfigs. A description was added
to the drivers/networking menuconfig and default selection for
current SOCs that have this part

Signed-off-by: Ahmed Mansour <ahmed.mansour@nxp.com>
Reviewed-by: York Sun <york.sun@nxp.com>
2018-01-10 12:28:58 -08:00
Ahmed Mansour
44262327aa drivers/misc: Share qbman init between archs
This patch adds changes necessary to move functionality present in
PowerPC folders with ARM architectures that have DPAA1 QBMan hardware

- Create new board/freescale/common/fsl_portals.c to house shared
  device tree fixups for DPAA1 devices with ARM and PowerPC cores
- Add new header file to top includes directory to allow files in
  both architectures to grab the function prototypes
- Port inhibit_portals() from PowerPC to ARM. This function is used in
  setup to disable interrupts on all QMan and BMan portals. It is
  needed because the interrupts are enabled by default for all portals
  including unused/uninitialised portals. When the kernel attempts to
  go to deep sleep the unused portals prevent it from doing so

Signed-off-by: Ahmed Mansour <ahmed.mansour@nxp.com>
Reviewed-by: York Sun <york.sun@nxp.com>
2018-01-10 12:28:47 -08:00
Tom Rini
084edbb689 Merge git://git.denx.de/u-boot-marvell 2018-01-10 08:05:57 -05:00
Tuomas Tynkkynen
55acf49eab PCI: Drop CONFIG_TSI108_PCI
Last user of this option went away in 2015 in commit:
d928664f41 ("powerpc: 74xx_7xx: remove 74xx_7xx cpu support")

Signed-off-by: Tuomas Tynkkynen <tuomas@tuxera.com>
2018-01-10 08:05:49 -05:00
Patrice Chotard
0b3f789ad1 ram: stm32: add memory mapping selection support
This allows to controls the memory internal mapping at
address 0x0000 0000.
We can either map at 0x0000 0000 :
  _ main flash memory
  _ system flash memory
  _ FMC bank1 (NOR/PSRAM 1 and 2)
  _ embedded SRAM
  _ FMC/SDRAM bank1

This is needed for future STM32F469-disco board

Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2018-01-10 08:05:47 -05:00
Patrice Chotard
c8f787760e board: stm32f429-disco: switch to DM STM32 pinctrl and gpio driver
Use available DM stm32f7_gpio.c and pinctrl_stm32.c drivers
instead of board GPIO initialization.

Remove stm32_gpio.c which is no more used and migrate
structs stm32_gpio_regs and stm32_gpio_priv into
arch-stm32f4/gpio.h to not break compilation.

Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2018-01-10 08:05:46 -05:00
Patrice Chotard
4a56fd484a board: stm32f429-disco: switch to DM STM32 clock driver
Use available DM clk_stm32f.c driver instead of dedicated
mach-stm32/stm32f4/clock.c.

Migrate periph_clock defines from stm32_periph.h directly in
CLK driver. These periph_clock defines will be removed when STMMAC,
TIMER2 and SYSCFG drivers will support DM CLK.

Enable also CLK flag.

Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2018-01-10 08:05:46 -05:00
Patrice Chotard
2d18d72858 board: stm32f429-disco: switch to DM STM32 serial driver
Remove serial_stm32.c driver and uart init from board file,
use available DM serial_stm32x7.c driver compatible for
STM32F4/F7 and H7 SoCs.

The serial_stm32x7.c driver will be renamed later with a more
generic name as it's shared with all STM32 Socs.

Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2018-01-10 08:05:46 -05:00
Patrice Chotard
98693c22d9 pinctrl: stm32: add stm32f4 pinctrl compatible strings
STM32F4 SoCs uses the same pinctrl block as found into
STM32F7 and H7 SoCs.
We can add "st,stm32f429-pinctrl" and "st,stm32f469-pinctrl"
compatible string into pinctrl_stm32.c.

Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2018-01-10 08:05:45 -05:00
Eddie Cai
bf2b72bef1 usb: rockchip: add the rockusb gadget
this patch implement rockusb protocol on the device side. this is based on
USB download gadget infrastructure. the rockusb function implements the rd,
wl, rid commands. it can work with rkdeveloptool

Signed-off-by: Eddie Cai <eddie.cai.linux@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2018-01-10 11:11:05 +01:00
Chen-Yu Tsai
f4f9896ac3 musb: sunxi: Use base address from device tree
Now that the musb sunxi glue driver is completely device model / device
tree driven, we should use the base address from the device tree,
instead of hard-coding it in the source code.

Fixes: 3a61b080ac ("musb: sunxi: switch to the device model")
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
2018-01-10 11:11:05 +01:00
Miquel Raynal
3f3946d30d pinctrl: mvebu: Make drivers depend on the pinctrl framework
Armada pinctrl drivers shall not be compiled without the entire pinctrl
framework and thus lack a "depends on" condition, otherwise the driver
will simply not be probed.

Signed-off-by: Miquel Raynal <miquel.raynal@free-electrons.com>
Signed-off-by: Stefan Roese <sr@denx.de>
2018-01-09 16:41:00 +01:00
Miquel Raynal
e7ab2ccd15 ARM: mvebu: Allow MVNETA to be selected with Armada 3700 SoCs
Until now, Armada 3700 SoCs could not enable the mvneta driver, and thus
did not benefit from Ethernet support. Add ARMADA_3700 in the
"depends on" list of the MVNETA Kconfig entry.

Signed-off-by: Miquel Raynal <miquel.raynal@free-electrons.com>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
Signed-off-by: Stefan Roese <sr@denx.de>
2018-01-09 16:41:00 +01:00
Ran Wang
91f4fb9b89 arm64: layerscape: Move CONFIG_HAS_FSL_DR_USB to Kconfig
Rename to USB_EHCI_FSL, use Kconfig to select ehci accordingly.

Signed-off-by: Ran Wang <ran.wang_1@nxp.com>
2018-01-09 12:37:15 +01:00
Ran Wang
be3872ea81 usb: ehci: fsl: Fix some compile warnings.
When enable CONFIG_HAS_FSL_DR_USB, we might encounter below compile
warning, apply this patch can fix it:

drivers/usb/host/ehci-fsl.c:109:4: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast]
   ((u32)hccr + HC_LENGTH(ehci_readl(&hccr->cr_capbase)));
    ^
drivers/usb/host/ehci-fsl.c:108:9: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast]
  hcor = (struct ehci_hcor *)
         ^
drivers/usb/host/ehci-fsl.c:115:8: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast]
        (u32)hccr, (u32)hcor,
        ^
include/log.h:131:26: note: in definition of macro 'debug_cond'
    printf(pr_fmt(fmt), ##args); \
                          ^~~~
drivers/usb/host/ehci-fsl.c:114:2: note: in expansion of macro 'debug'
  debug("ehci-fsl: init hccr %x and hcor %x hc_length %d\n",
  ^~~~~
drivers/usb/host/ehci-fsl.c:115:19: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast]
        (u32)hccr, (u32)hcor,
                   ^
include/log.h:131:26: note: in definition of macro 'debug_cond'
    printf(pr_fmt(fmt), ##args); \
                          ^~~~
drivers/usb/host/ehci-fsl.c:114:2: note: in expansion of macro 'debug'
  debug("ehci-fsl: init hccr %x and hcor %x hc_length %d\n",
  ^~~~~

Signed-off-by: Ran Wang <ran.wang_1@nxp.com>
2018-01-09 12:37:15 +01:00
Elaine Zhang
538f67c332 rockchip: clk: bind reset driver
Bind rockchip reset to clock-controller with rockchip_reset_bind().

Signed-off-by: Elaine Zhang <zhangqing@rock-chips.com>
Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2018-01-09 11:13:32 +01:00
Elaine Zhang
760188c1aa rockchip: reset: support a (common) rockchip reset drivers
Create driver to support the soft reset (i.e. peripheral)
of all Rockchip SoCs.

Example of usage:
i2c driver:
	ret = reset_get_by_name(dev, "i2c", &reset_ctl);
	if (ret) {
		error("reset_get_by_name() failed: %d\n", ret);
	}

	reset_assert(&reset_ctl);
	udelay(50);
	reset_deassert(&reset_ctl);

i2c dts node:
resets = <&cru SRST_P_I2C1>, <&cru SRST_I2C1>;
reset-names = "p_i2c", "i2c";

Signed-off-by: Elaine Zhang <zhangqing@rock-chips.com>
Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
[Fixed commit tag:]
Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2018-01-09 11:13:32 +01:00
Tom Rini
2f4c9de3d0 Merge git://git.denx.de/u-boot-imx 2018-01-08 12:51:47 -05:00
Jagan Teki
ca9d211e2c mtd: nand: mxs_nand_spl: Remove nand size print
It is not much needed to print nand size in SPL during nand boot,
and most of nand spl drivers doesn't print the same.

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2018-01-08 17:37:12 +01:00
Clemens Gruber
598e9dccc7 crypto/fsl: fix BLOB encapsulation and decapsulation
The blob_encap and blob_decap functions were not flushing the dcache
before passing data to CAAM/DMA and not invalidating the dcache when
getting data back.
Therefore, blob encapsulation and decapsulation failed with errors like
the following due to data cache incoherency:
"40000006: DECO: desc idx 0: Invalid KEY command"

To ensure coherency, we require the key_mod, src and dst buffers to be
aligned to the cache line size and flush/invalidate the memory regions.
The same requirements apply to the job descriptor.

Tested on an i.MX6Q board.

Reviewed-by: Sumit Garg <sumit.garg@nxp.com>
Signed-off-by: Clemens Gruber <clemens.gruber@pqgruber.com>
2018-01-08 08:26:03 -05:00
Fabio Estevam
290e7cfdbf mx6ull: Handle the CONFIG_MX6ULL cases correctly
Since commit 051ba9e082 ("Kconfig: mx6ull: Deselect MX6UL from
CONFIG_MX6ULL") CONFIG_MX6ULL does not select CONFIG_MX6UL anymore, so
take this into consideration in all the checks for CONFIG_MX6UL.

This fixes a boot regression.

Reported-by: Stefan Agner <stefan@agner.ch>
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Reviewed-by: Stefan Agner <stefan@agner.ch>
Tested-by: Breno Lima <breno.lima@nxp.com>
Tested-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Stefano Babic <sbabic@denx.de>
Tested-by: Jörg Krause <joerg.krause@embedded.rocks>
2018-01-04 16:29:04 +01:00
Peng Fan
f9d891f0a9 video: Support multiple lines version string display
The calculation of left space for version string is not correct, should
use VIDEO_COLS not VIDEO_LINE_LEN / 2, otherwise we will get larger space
than actual have and cause string to overlay logo picture.

Also current version string display only supports two lines words at max.
This also causes overlay when the LCD pixel column size is not enough.

Signed-off-by: Peng Fan <peng.fan@nxp.com>
Tested-by: Anatolij Gustschin <agust@denx.de>
2018-01-03 11:53:48 +01:00
Peng Fan
cca3ff054a video: ipu: Fix dereferencing NULL pointer problem
The clk_set_rate function dereferences the clk pointer without
checking whether it is NULL. This may cause problem when clk is NULL.

Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Anatolij Gustschin <agust@denx.de>
2018-01-03 09:46:52 +01:00
Felix Brack
46caea7f96 power: tps65910: replace error() by pr_err()
The patch replaces the former error() by the new pr_err().
This makes the TPS65910 driver conform to Masahiro's patch
'treewide:replace with error() with pr_err()' introduced
October 2017.

Signed-off-by: Felix Brack <fb@ltec.ch>
Reviewed-by: Simon Glass <sjg@chromium.org>
2018-01-01 09:04:19 -05:00
Tom Rini
b55c89ce02 Merge git://git.denx.de/u-boot-spi 2017-12-19 07:57:40 -05:00
Tom Rini
76cc372879 Merge git://git.denx.de/u-boot-sunxi 2017-12-19 07:57:33 -05:00
Sean Nyekjaer
065592b40b mtd/spi: fix block count for is25lq040b
This spi-nor is 4Mbit/512KB

Fixes: b4fbcbc5a5 ("mtd/spi: add support for is25lq040b")
Signed-off-by: Sean Nyekjaer <sean.nyekjaer@prevas.dk>
Reviewed-by: Jagan Teki <jagan@openedev.com>
2017-12-19 17:33:48 +05:30
Tom Rini
1a3fc354b5 Merge git://git.denx.de/u-boot-fsl-qoriq 2017-12-18 18:39:00 -05:00
Jerome Brunet
30cbb524bc net: phy: meson-gxl: detect LPA corruption
This patch is ported from the Linux patch posted at [1] and applied to
net tree as commit f1e2400a80ff.

The purpose of this change is to fix the incorrect detection of the link
partner (LP) advertised capabilities which sometimes happens with this PHY
(roughly 1 time in a dozen)

This issue may cause the link to be negotiated at 10Mbps/Full or
10Mbps/Half when 100MBps/Full is actually possible. In some case, the link
is even completely broken and no communication is possible.

To detect the corruption, we must look for a magic undocumented bit in the
WOL bank (hint given by the SoC vendor kernel) but this is not enough to
cover all cases. We also have to look at the LPA ack. If the LP supports
Aneg but did not ack our base code when aneg is completed, we assume
something went wrong.

The detection of a corrupted LPA triggers a restart of the aneg process.
This solves the problem but may take up to 6 retries to complete.

[1] https://lkml.kernel.org/r/20171208110811.30789-1-jbrunet@baylibre.com

Fixes: 8995a96d1d ("net: phy: Add Amlogic Meson GXL Internal PHY support")
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2017-12-18 13:06:30 -05:00
Tom Rini
90d75d2efc Xilinx changes for v2018.01-rc2-v2
fpga:
 - Enable loading bitstream via fit image for !xilinx platforms
 
 zynq:
 - Fix SPL SD boot mode
 
 zynqmp:
 - Not not reset in panic
 - Do not use simple allocator because of fat changes
 - Various dt chagnes
 - modeboot variable setup
 - Fix fpga loading on automotive devices
 - Fix coverity issues
 
 test:
 - Fix env test for !hush case - Stephen's patch
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iEYEABECAAYFAlo3tMgACgkQykllyylKDCFQvQCfeFgaC/95gx9orLrHxpDx7s46
 wwYAmwSoXn6hc9bEzgKIppQHblzfqGU6
 =mscK
 -----END PGP SIGNATURE-----

Merge tag 'xilinx-for-v2018.01-rc2-v2' of git://www.denx.de/git/u-boot-microblaze

Xilinx changes for v2018.01-rc2-v2

fpga:
- Enable loading bitstream via fit image for !xilinx platforms

zynq:
- Fix SPL SD boot mode

zynqmp:
- Not not reset in panic
- Do not use simple allocator because of fat changes
- Various dt chagnes
- modeboot variable setup
- Fix fpga loading on automotive devices
- Fix coverity issues

test:
- Fix env test for !hush case - Stephen's patch
2017-12-18 12:23:27 -05:00
Tom Rini
15616a0aa5 Merge git://git.denx.de/u-boot-dm 2017-12-14 15:46:07 -05:00
Goldschmidt Simon
8b93a92f6d fpga: allow programming fpga from FIT image for all FPGA drivers
This drops the limit that fpga is only loaded from FIT images for Xilinx.
This is done by moving the 'partial' check from 'common/image.c' to
'drivers/fpga/xilinx.c' (the only driver supporting partial images yet)
and supplies a weak default implementation in 'drivers/fpga/fpga.c'.

Signed-off-by: Simon Goldschmidt <sgoldschmidt@de.pepperl-fuchs.com>
Tested-by: Michal Simek <michal.simek@xilinx.com> (On zcu102)
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2017-12-14 16:09:39 +01:00
Tom Rini
6b308494c5 Merge branch 'master' of git://git.denx.de/u-boot-usb 2017-12-13 17:58:36 -05:00
Tom Rini
fd12455643 Merge branch 'rmobile-mx' of git://git.denx.de/u-boot-sh 2017-12-13 17:58:27 -05:00
Wenbin song
a8f33034f2 armv8: ls1043a/ls2080a: check SoC by device ID
Check LS1043A/LS2080a by device ID without using personality ID to
determine revision number. This check applies to all various
personalities of the same SoC family.

Signed-off-by: Wenbin Song <wenbin.song@nxp.com>
Reviewed-by: York Sun <york.sun@nxp.com>
2017-12-13 13:40:29 -08:00
Felix Brack
854dfbf99b power: pmic/regulator: Add basic support for TPS65910
Texas Instrument's TPS65910 PMIC contains 3 buck DC-DC converts, one
boost DC-DC converter and 8 LDOs. This patch implements driver model
support for the TPS65910 PMIC and its regulators making the get/set
API for regulator value/enable available.
This patch depends on the patch "am33xx: Add a function to query MPU
voltage in uV" to build correctly. For boards relying on the DT
include file tps65910.dtsi the v3 patch "power: extend prefix match
to regulator-name property" and an appropriate regulator naming is
also required.

Signed-off-by: Felix Brack <fb@ltec.ch>
Reviewed-by: Simon Glass <sjg@chromium.org>
2017-12-12 19:53:45 -07:00
Stefan Roese
8a5cbc065d dm: blk: Use uclass_find_first/next_device() in blk_first/next_device()
This patch changes the calls to uclass_first/next_device() in blk_first/
next_device() to use uclass_find_first/next_device() instead. These functions
don't prepare the devices, which is correct in this case.

With this patch applied, the "usb storage" command now works again as
expected:

=> usb storage
  Device 0: Vendor: SanDisk Rev: 1.00 Prod: Ultra
  Type: Removable Hard Disk
  Capacity: 58656.0 MB = 57.2 GB (120127488 x 512)

Without this patch, it used to generate this buggy output:

=> usb storage
Card did not respond to voltage select!
mmc_init: -95, time 26
No storage devices, perhaps not 'usb start'ed..?

Signed-off-by: Stefan Roese <sr@denx.de>
Suggested-by: Simon Glass <sjg@chromium.org>
Cc: Simon Glass <sjg@chromium.org>
Cc: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2017-12-12 19:53:45 -07:00
Felix Brack
bf802f5d54 power: extend prefix match to regulator-name property
This patch extends pmic_bind_children prefix matching. In addition to
the node name the property regulator-name is used while trying to match
prefixes. This allows assigning different drivers to regulator nodes
named regulator@1 and regulator@10 for example.
I have discarded the idea of using other properties then regulator-name
as I do not see any benefit in using property compatible or even
regulator-compatible. Of course I am open to change this if there are
good reasons to do so.

Signed-off-by: Felix Brack <fb@ltec.ch>
Reviewed-by: Simon Glass <sjg@chromium.org>
2017-12-12 19:53:45 -07:00
Philipp Tomsich
b53f6992e9 dm: reset: have the reset-command perform a COLD reset
The DM version of do_reset has been issuing a warm-reset, which (on
some platforms keeps GPIOs and other parts of the platform active).
This may cause unintended behaviour, as calling do_reset usually
indicates a desire to reset the board/platform and not just the CPU.

This changes do_reset to always request a COLD reset.
Note that programmatic uses can still invoke a WARM reset through
reset_cpu() or using sysreset_walk().

Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2017-12-12 19:53:45 -07:00
Jorge Ramirez-Ortiz
bd3006c849 drivers: spmi-msm: fix scanning for peripherals
A typo in the probe function causes not all peripherals to be scanned
(in the case of the Dragonboard820c - work in progress - it wont find pmic0).
2017-12-12 21:33:38 -05:00
Tuomas Tynkkynen
cf71338ee7 ata: Migrate CONFIG_MVSATA_IDE to Kconfig
Signed-off-by: Tuomas Tynkkynen <tuomas.tynkkynen@iki.fi>
2017-12-12 18:16:06 -05:00
Tuomas Tynkkynen
b82e667f79 ata: Migrate CONFIG_LIBATA to Kconfig
This symbol enables some library code used by various SATA drivers,
so make this a non-user-visible symbol select'ed by the respective
drivers, and let moveconfig handle the rest.

Signed-off-by: Tuomas Tynkkynen <tuomas.tynkkynen@iki.fi>
2017-12-12 18:16:05 -05:00
Tuomas Tynkkynen
9fd95ef0d3 ata: Migrate CONFIG_SCSI_AHCI to Kconfig
And use 'imply' liberally.

Signed-off-by: Tuomas Tynkkynen <tuomas.tynkkynen@iki.fi>
2017-12-12 18:13:19 -05:00
Tuomas Tynkkynen
477b16a798 ata: Migrate CONFIG_DWC_AHSATA to Kconfig
Signed-off-by: Tuomas Tynkkynen <tuomas.tynkkynen@iki.fi>
2017-12-12 14:06:46 -05:00
Tuomas Tynkkynen
9920d151c4 ata: Migrate CONFIG_FSL_SATA to Kconfig
Use 'imply' here liberally to avoid the combinatorial explosion of
defconfig changes in the PowerPC boards.

Signed-off-by: Tuomas Tynkkynen <tuomas.tynkkynen@iki.fi>
2017-12-12 14:05:48 -05:00
Tuomas Tynkkynen
ad0ac54361 ata: Migrate CONFIG_SATA_MV to Kconfig
Signed-off-by: Tuomas Tynkkynen <tuomas.tynkkynen@iki.fi>
2017-12-12 14:05:48 -05:00
Tuomas Tynkkynen
32f0398ba5 ata: Migrate CONFIG_SATA_SIL3114 to Kconfig
Signed-off-by: Tuomas Tynkkynen <tuomas.tynkkynen@iki.fi>
2017-12-12 14:05:48 -05:00
Tuomas Tynkkynen
c88ecf47bd ata: Migrate CONFIG_SATA_SIL to Kconfig
Use 'imply' here liberally to avoid the combinatorial explosion of
defconfig changes in the PowerPC boards.

Signed-off-by: Tuomas Tynkkynen <tuomas.tynkkynen@iki.fi>
2017-12-12 14:05:48 -05:00
Tuomas Tynkkynen
ac2e33efda ata: Drop CONFIG_MX51_PATA
The last user of this driver went away in August 2015 in commit:
b6073fd211 ("arm: Remove mx51_efikamx, mx51_efikasb boards")

Signed-off-by: Tuomas Tynkkynen <tuomas.tynkkynen@iki.fi>
2017-12-12 14:05:48 -05:00
Tuomas Tynkkynen
0d26b831d7 ata: Drop CONFIG_SATA_DWC
The last user of this driver went away in June 2017, in commit:
98f705c9ce ("powerpc: remove 4xx support")

Signed-off-by: Tuomas Tynkkynen <tuomas.tynkkynen@iki.fi>
2017-12-12 14:05:35 -05:00
Alexey Brodkin
d5fbcd57ed gpio/hsdk: Depend on DM_GPIO instead of simple DM
This driver really is DM GPIO one and so we need to have a correct
dependency, because DM alone doesn't provide required for CMD_GPIO
call and we're seeing build failures like this:
---------------------->8---------------------
cmd/built-in.o: In function 'do_gpio':
.../cmd/gpio.c:188: undefined reference to 'gpio_request'
...
---------------------->8---------------------

Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Cc: Eugeniy Paltsev <paltsev@synopsys.com>
Cc: Simon Glass <sjg@chromium.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
2017-12-12 18:47:30 +03:00
Tom Rini
87f3dee22b Merge git://git.denx.de/u-boot-uniphier 2017-12-11 17:06:04 -05:00
Masahiro Yamada
dc774e69bb mtd: nand: denali: make NAND_DENALI unconfigurable option
denali.c has no driver entry in itself.  It makes sense only when
compiled together with denali_dt.c

Let NAND_DENALI_DT select NAND_DENALI, and hide NAND_DENALI from
the Kconfig menu.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-12-12 00:36:11 +09:00
Eugeniy Paltsev
e80dac0ab8 ARC: clk: introduce HSDK CGU clock driver
Synopsys HSDK clock controller generates and supplies clocks to various
controllers and peripherals within the SoC.

Each clock has assigned identifier and client device tree nodes can use
this identifier to specify the clock which they consume. All available
clocks are defined as preprocessor macros in the
dt-bindings/clock/snps,hsdk-cgu.h header and can be used in device
tree sources.

Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
2017-12-11 11:36:23 +03:00
Chris Brandt
243fd6420d usb: r8a66597: convert wait loop to readw_poll_timeout
It is better to use an existing wait loop implementation.

Signed-off-by: Chris Brandt <chris.brandt@renesas.com>
2017-12-09 13:39:27 +01:00
Marek Vasut
9e4a63736e net: ravb: Add R8A77995 D3 compatible
Add new compatible to the Ethernet AVB driver for R8A77995 D3 SoC.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Joe Hershberger <joe.hershberger@ni.com>
Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2017-12-09 13:36:26 +01:00
Marek Vasut
dc3bb3d41e net: ravb: Add R8A77970 V3M compatible
Add new compatible to the Ethernet AVB driver for R8A77970 V3M SoC.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Joe Hershberger <joe.hershberger@ni.com>
Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2017-12-09 13:36:26 +01:00
Marek Vasut
af098530e5 mmc: uniphier-sd: Add R8A77995 D3 compatible
Add new compatible to the Uniphier SD driver for R8A77995 D3 SoC.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2017-12-09 13:36:26 +01:00
Marek Vasut
6ba2382f42 mmc: uniphier-sd: Add R8A77970 V3M compatible
Add new compatible to the Uniphier SD driver for R8A77970 V3M SoC.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2017-12-09 13:36:26 +01:00
Marek Vasut
e3ab42480e gpio: rmobile: Add generic Gen3 compatible
Add generic compatible to the GPIO driver for Gen3 SoCs.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2017-12-09 13:36:26 +01:00
Marek Vasut
f122c13bf5 gpio: rmobile: Add R8A77995 D3 compatible
Add new compatible to the GPIO driver for R8A77995 D3 SoC.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2017-12-09 13:36:26 +01:00
Marek Vasut
0f2f0d89c4 gpio: rmobile: Add R8A77970 V3M compatible
Add new compatible to the GPIO driver for R8A77970 V3M SoC.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2017-12-09 13:36:26 +01:00
Marek Vasut
a59e697618 pinctrl: rmobile: Add R8A77995 D3 PFC tables
Add PFC tables for R8A77995 D3 SoC.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2017-12-09 13:36:26 +01:00
Marek Vasut
c106bb53ea pinctrl: rmobile: Add R8A77970 V3M PFC tables
Add PFC tables for R8A77970 V3M SoC.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2017-12-09 13:36:26 +01:00
Marek Vasut
2c150950b0 clk: rmobile: Add R8A77995 D3 clock tables
Add clock tables for R8A77995 D3 SoC.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2017-12-09 13:36:25 +01:00
Marek Vasut
7691ff2ada clk: rmobile: Add R8A77970 V3M clock tables
Add clock tables for R8A77970 V3M SoC.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2017-12-09 13:36:25 +01:00
Marek Vasut
894ee0575f clk: rmobile: Fix typo in R8A7796 RPC clock table entry
Fix a copy-paste typo in the clock table entry, s/7795/7796/.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2017-12-09 13:36:25 +01:00
Tom Rini
6c7010b779 Merge git://git.denx.de/u-boot-fsl-qoriq 2017-12-07 17:56:51 -05:00