Commit graph

22122 commits

Author SHA1 Message Date
Simon Glass
0d56fba3c4 dm: core: Drop dev_set_of_offset()
This pre-livetree function is not needed anymore. Drop it.

Signed-off-by: Simon Glass <sjg@chromium.org>
2020-12-13 07:58:18 -07:00
Simon Glass
a2703ce10c dm: Remove uses of device_bind_offset()
This function is not needed since the standard device_bind() can be used
instead.

Signed-off-by: Simon Glass <sjg@chromium.org>
2020-12-13 07:58:18 -07:00
Simon Glass
0de1b07406 dm: core: Add a livetree function to check node status
Add a way to find out if a node is enabled or not, based on its 'status'
property.

Signed-off-by: Simon Glass <sjg@chromium.org>
2020-12-13 07:58:18 -07:00
Simon Glass
734206dda1 dm: core: Rename device_bind_ofnode() to device_bind()
This is the standard function to use when binding devices. Drop the
'_ofnode' suffix to make this clear.

Signed-off-by: Simon Glass <sjg@chromium.org>
2020-12-13 07:58:18 -07:00
Simon Glass
e12052b322 dm: core: Rename device_bind() to device_bind_offset()
This function is not necessary anymore, since device_bind_ofnode() does
the same thing and works with both flattree and livetree.

Rename it to indicate that it is special.

Signed-off-by: Simon Glass <sjg@chromium.org>
2020-12-13 07:58:17 -07:00
Heinrich Schuchardt
b46f30a378 sandbox: add handler for exceptions
Add a handler for SIGILL, SIGBUS, SIGSEGV.

When an exception occurs print the program counter and the loaded
UEFI binaries and reset the system if CONFIG_SANDBOX_CRASH_RESET=y
or exit to the OS otherwise.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
2020-12-13 07:58:17 -07:00
Aleksandar Gerasimovski
bb1828f345 drivers: ifc: add define for IFC_CSPRn TE bit
To drive TE pin high is supported IFC configuration that can be used on
some designs.

Signed-off-by: Aleksandar Gerasimovski <aleksandar.gerasimovski@hitachi-powergrids.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-12-10 13:56:39 +05:30
Manish Tomar
4ed00656a9 lx2160a: Fix address for secure boot headers
Update kernel_size_sd variable with correct value for lx2160a.

Signed-off-by: Manish Tomar <manish.tomar@nxp.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-12-10 13:56:39 +05:30
Manish Tomar
507103f8a9 ls1043a: Fix address for secure boot headers
Update kernelheader_addr and kernelheader_addr variables with
correct values for ls1043a.

Signed-off-by: Manish Tomar <manish.tomar@nxp.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-12-10 13:56:39 +05:30
Biwen Li
fc9a3d1b29 include/configs: ls1012aqds: add default environment variable
This adds default environment variable for ls1012aqds

Signed-off-by: Biwen Li <biwen.li@nxp.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-12-10 13:56:39 +05:30
Meenakshi Aggarwal
9ed303dfa9 armv8: lx2162aqds: Add support for LX2162AQDS platform
This patch add base support for LX2162AQDS board.
LX2162AQDS board supports LX2162A family SoCs.
This patch add basic support of platform.

Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Signed-off-by: Zhao Qiang <qiang.zhao@nxp.com>
Signed-off-by: hui.song <hui.song_1@nxp.com>
Signed-off-by: Manish Tomar <manish.tomar@nxp.com>
Signed-off-by: Vikas Singh <vikas.singh@nxp.com>
Signed-off-by: Meenakshi Aggarwal <meenakshi.aggarwal@nxp.com>
[Rebased]
Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-12-10 13:56:39 +05:30
Meenakshi Aggarwal
2a29a9a1b4 drivers/net/phy: Add CORTINA_NO_FW_UPLOAD to Kconfig
Move CORTINA_NO_FW_UPLOAD to Kconfig file so that it can
be controlled via defconfig files.

Signed-off-by: Meenakshi Aggarwal <meenakshi.aggarwal@nxp.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-12-10 13:56:39 +05:30
Heinrich Schuchardt
f9ad240e65 efi_loader: make efi_protocol_open() non-static
Provide efi_protocol_open() as library function.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-12-10 09:15:33 +01:00
Heinrich Schuchardt
b6f11098c9 efi_loader: move EFI_LOAD_FILE2_PROTOCOL_GUID
The EFI_LOAD_FILE_PROTOCOL_GUID and EFI_LOAD_FILE2_PROTOCOL_GUID are needed
to complement the implementation of the LoadFile() boot service.

Remove a duplicate declaration of a variable for the
EFI_LOAD_FILE2_PROTOCOL_GUID.
Move the remaining declaration to efi_boottime.c.
Add a variable for the EFI_LOAD_FILE_PROTOCOL_GUID.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-12-10 09:15:32 +01:00
Heinrich Schuchardt
d236e825a2 fs: fat: export fat_next_cluster()
Rename function next_cluster() to fat_next_cluster() and export it.

When creating a new directory entries we should reuse deleted entries.
This requires re-scanning the directory.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-12-10 09:14:58 +01:00
Tom Rini
2a42de6df1 - Manage CONFIG_ENV_EXT4_DEVICE_AND_PART in stm32mp1 board
- Update ARM STI and ARM STM STM32MP Arch maintainers emails
 - Enable internal pull-ups for SDMMC1 on DHCOM SoM
 -----BEGIN PGP SIGNATURE-----
 
 iQEzBAABCgAdFiEE56Yx6b9SnloYCWtD4rK92eCqk3UFAl/Q5aAACgkQ4rK92eCq
 k3XuqAgAifJcb3NxKmWa4eFDbZpWZ1R8h6FPp6vlmvyC4C3otRHEe5WrYCsAeqy1
 Gs311dtdluc4y5Ltmf54OcN7ICfLsSiOvye85f5myhPj1v4d1F1Z70X0FDo/o9hE
 7TEZfWBQtNjXI4F23+vaDT4jCvUZV1LR6Lab/zLLw1/uLUxxS799kcFiWgHLuEoH
 8Cv0JbgzLuuVk5lyLJ+DFZOcntwWu5+Qm+l5eS46armbKphMFh5KPJ9PG81eJE3N
 zsCpavEs4nuQl7wGF8HPfDWxz5Xef6ip3A4Owh92t3WQWKxp1bSUKqDeKZTkhIyS
 LSJKe9CQ9+zCS3m3Utoi1pVt1EbFrQ==
 =cgbE
 -----END PGP SIGNATURE-----

Merge tag 'u-boot-stm32-20201209' of https://gitlab.denx.de/u-boot/custodians/u-boot-stm

- Manage CONFIG_ENV_EXT4_DEVICE_AND_PART in stm32mp1 board
- Update ARM STI and ARM STM STM32MP Arch maintainers emails
- Enable internal pull-ups for SDMMC1 on DHCOM SoM
2020-12-09 11:36:41 -05:00
Patrice Chotard
0f8106f8e0 treewide: Update email address Patrick Delaunay and Patrice Chotard
Update Patrick and my email address with the one dedicated to
upstream activities.

Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com>
Reviewed-by: Patrick Delaunay <patrick.delaunay@st.com>
2020-12-09 10:57:50 +01:00
Tom Rini
19ea606109 Merge https://gitlab.denx.de/u-boot/custodians/u-boot-imx 2020-12-08 09:53:03 -05:00
Tom Rini
8c5ea5361c configs: migrate CONFIG_IMX_THERMAL to defconfigs
Done via moveconfig.py

Signed-off-by: Tom Rini <trini@konsulko.com>
2020-12-07 08:54:29 +01:00
Igor Opaniuk
a51fdba3fa board: toradex: add apalis-imx8x 2gb wb it v1.1a module support
This commit adds initial support for the Toradex Apalis iMX8X 2GB WB
IT V1.1A System on Module support [1].

Boot log:
U-Boot 2020.10-02940-g894aebb7e8-dirty (Oct 22 2020 - 09:43:57 +0300)
CPU:   NXP i.MX8QXP RevB A35 at 1200 MHz at 30C
DRAM:  2 GiB
MMC:   FSL_SDHC: 0, FSL_SDHC: 1
Loading Environment from MMC... OK
In:    serial@5a070000
Out:   serial@5a070000
Err:   serial@5a070000
Model: Toradex Apalis iMX8 QuadXPlus 2GB Wi-Fi / BT IT V1.1A,
Serial# 06617018
Net:   eth0: ethernet@5b040000 [PRIME]
Hit any key to stop autoboot:  0

Functionality wise the following is known to be working:
  - eMMC and MMC/SD card
  - Ethernet (*)
  - GPIOs
  - I2C

Unfortunately, there is no USB functionality for the i.MX 8QXP as of
yet.

* With the SCU FW from the latest Toradex BSP 5.0.0 (SCU FW 1.5.1)
ETH PHY encounters bring up problems after reset, this will be fixed
soon on SCU FW side.

[1] https://www.toradex.com/computer-on-modules/apalis-arm-family/nxp-imx-8x
Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
Acked-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
2020-12-06 15:31:37 +01:00
Ian Ray
4f1970f437 board: ge: bx50v3: check b850v3 power management watchdog
Set `bootcause' from b850v3 power management watchdog status.

Boot cause "REVERT" is no longer used, remove it.

Signed-off-by: Ian Ray <ian.ray@ge.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
2020-12-06 15:31:37 +01:00
Ian Ray
f2ac6f7796 board: ge: bx50v3: correct CONFIG_CMD_NFS
Fix typo in NFS command configuration check.

Signed-off-by: Ian Ray <ian.ray@ge.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
2020-12-06 15:31:36 +01:00
Heiko Schocher
7a8d18da4b imx: aristainetos: enable U-Boot Environment variables protection
enable Environment protection with:

CONFIG_ENV_APPEND=y
CONFIG_ENV_WRITEABLE_LIST=y
CONFIG_ENV_ACCESS_IGNORE_FORCE

and add board specific env_get_location()
function.

Signed-off-by: Heiko Schocher <hs@denx.de>
2020-12-06 15:07:40 +01:00
Heiko Schocher
015c026f7a imx6: add support for aristainetos2c_cslb board variant
add support for aristainetos2c_cslb board variant.

Signed-off-by: Heiko Schocher <hs@denx.de>
2020-12-06 15:07:06 +01:00
Heiko Schocher
3cf02f5ffa imx6: remove not longer supported aristainetos boards
Removed aristainetos2, 2b, 2b-csl. This boards have been
recalled and destroyed.

Adapt board code to remove stuff not needed anymore.

Fix checkpatch warning, remove fdt_high and initrd_high
from default environment.

Signed-off-by: Heiko Schocher <hs@denx.de>
zu remove
2020-12-06 15:06:16 +01:00
Simon Glass
51bb33846a bootm: Support string substitution in bootargs
In some cases it is necessary to pass parameters to Linux so that it will
boot correctly. For example, the rootdev parameter is often used to
specify the root device. However the root device may change depending on
whence U-Boot loads the kernel. At present it is necessary to build up
the command line by adding device strings to it one by one.

It is often more convenient to provide a template for bootargs, with
U-Boot doing the substitution from other environment variables.

Add a way to substitute strings in the bootargs variable. This allows
things like "rootdev=${rootdev}" to be used in bootargs, with the
${rootdev} substitution providing the UUID of the root device.

For example, to substitute the GUID of the kernel partition:

  setenv bootargs "console=/dev/ttyS0 rootdev=${uuid}/PARTNROFF=1
		kern_guid=${uuid}"
  part uuid mmc 2:2 uuid
  bootm

This is particularly useful when the command line from another place. For
example, Chrome OS stores the command line next to the kernel itself. It
depends on the kernel version being used as well as the hardware features,
so it is extremely difficult to devise a U-Boot script that works on all
boards and kernel versions. With this feature, the command line can be
read from disk and used directly, with a few substitutions set up.

Signed-off-by: Simon Glass <sjg@chromium.org>
2020-12-04 19:48:29 -05:00
Simon Glass
1a62d64c7d cli: Support macro processing with a fixed-size buffer
At present cli_simple_process_macros() requires that the caller provide
an output buffer that is exactly CONFIG_SYS_CBSIZE bytes in length. This
makes sense since it is designed to be used from the command line. But we
also want to use it for bootargs substitution.

Update the function to allow the caller to specify the buffer size. Also
return an error if the buffer is exhausted. The caller can ignore that if
preferred.

Signed-off-by: Simon Glass <sjg@chromium.org>
2020-12-04 16:10:01 -05:00
Simon Glass
4448fe8e4e bootm: Allow updating the bootargs in a buffer
At present we only support updating the 'bootargs' environment
variable. Add another function to update a buffer instead. This will
allow zimage to use this feature.

Also add a lot more tests to cover various cases.

Signed-off-by: Simon Glass <sjg@chromium.org>
2020-12-04 16:09:26 -05:00
Simon Glass
b3c01678fd bootm: Update bootm_process_cmdline_env() to use flags
At present only one transformation is supported: making the Linux console
silent. To prepare for adding more, convert the boolean parameter into a
flag value.

Signed-off-by: Simon Glass <sjg@chromium.org>
2020-12-04 16:09:26 -05:00
Simon Glass
d9477a0a4d bootm: Add a bool parameter to bootm_process_cmdline_env()
This function will soon do more than just handle the 'silent linux'
feature. As a first step, update it to take a boolean parameter,
indicating whether or not the processing is required.

Signed-off-by: Simon Glass <sjg@chromium.org>
2020-12-04 16:09:26 -05:00
Simon Glass
4dcb81545a bootm: Rename fixup_silent_linux()
We want to add more processing to this function. Before doing so, rename
it to bootm_process_cmdline_env(), which is more generic.

Signed-off-by: Simon Glass <sjg@chromium.org>
2020-12-04 16:09:26 -05:00
Simon Glass
4ae42643d0 bootm: Update fixup_silent_linux() to return an error
At present this function fails silently on error. Update it to produce
an error code. Report this error to the user and abort the boot, since it
likely will prevent a successful start.

No tests are added at this stage, since additional refactoring is taking
place in subsequent patches.

Signed-off-by: Simon Glass <sjg@chromium.org>
2020-12-04 16:09:26 -05:00
Simon Glass
f158ba15ee bootm: Add tests for fixup_silent_linux()
This function currently has no tests. Export it so that we can implement
a simple test on sandbox. Use IS_ENABLED() to remove the unused code,
instead #ifdef.

Signed-off-by: Simon Glass <sjg@chromium.org>
2020-12-04 16:09:26 -05:00
Simon Glass
96434a76fd env: Allow returning errors from hdelete_r()
At present this function returns 1 on success and 0 on failure. But in
the latter case it provides no indication of what went wrong.

If an attempt is made to delete a non-existent variable, the caller may
want to ignore this error. This happens when setting a non-existent
variable to "", for example.

Update the function to return 0 on success and a useful error code on
failure. Add a function comment too.

Make sure that env_set() does not return an error if it is deleting a
variable that doesn't exist. We could update env_set() to return useful
error numbers also, but that is beyond the scope of this change.

Signed-off-by: Simon Glass <sjg@chromium.org>

wip
2020-12-04 16:09:06 -05:00
Michael Walle
7b866825cd spl: atf: add support for LOAD_IMAGE_V2
Newer platforms use the LOAD_IMAGE_V2 parameter passing method. Add
support for it.

Signed-off-by: Michael Walle <michael@walle.cc>
2020-12-04 16:09:06 -05:00
Michael Walle
553825c109 spl: atf: remove helper structure from common header
bl2_to_bl31_params_mem is just an implementation detail of the SPL ATF
support and is not needed anywhere else. Move it from the header to the
actual module.

Signed-off-by: Michael Walle <michael@walle.cc>
Acked-by: Michal Simek <michal.simek@xilinx.com>
2020-12-04 16:09:05 -05:00
Michael Walle
d2cb0c8f75 spl: atf: provide a bl2_plat_get_bl31_params_default()
Move the actual implementation of the bl2_plat_get_bl31_params() to its
own function. The weak function will just call the default
implementation. This has the advantage that board code can still call
the original implementation if it just want to modify minor things.

Signed-off-by: Michael Walle <michael@walle.cc>
2020-12-04 16:09:05 -05:00
Patrick Delaunay
4f5128ff89 configs: cei-tk1-som: remove CONFIG_ARMV7_PSCI in include file
Activate ARCH_SUPPORT_PSCI as other TEGRA124 target and remove
CONFIG_ARMV7_PSCI and CONFIG_ARMV7_PSCI_NR_CPUS in configs file as they
are migrated in Kconfig.

Select CONFIG_ARMV7_PSCI_0_1 (the first PSCI version),
because CONFIG_ARMV7_PSCI_0_2 and CONFIG_ARMV7_PSCI_1_0
are not activated in this product.

Hi,

This patch depend on the previous serie [1].

I don't test this patch on real hardware but
after this patch the size of the binary don't change.

In .config we have:
  CONFIG_ARCH_SUPPORT_PSCI=y
  CONFIG_ARMV7_PSCI=y
  # CONFIG_ARMV7_PSCI_1_0 is not set
  # CONFIG_ARMV7_PSCI_0_2 is not set
  CONFIG_ARMV7_PSCI_0_1=y
  CONFIG_ARMV7_PSCI_NR_CPUS=4

In u-boot.cfg, this patch only add the 2 lines
  #define CONFIG_ARCH_SUPPORT_PSCI 1
  #define CONFIG_ARMV7_PSCI_0_1 1

[1] "Convert CONFIG_ARMV7_PSCI_1_0 and CONFIG_ARMV7_PSCI_0_2 to Kconfig"
http://patchwork.ozlabs.org/project/uboot/list/?series=184029

Regards
Patrick

END

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
Reviewed-by: Peter Chubb <peter.chubb@data61.csiro.au>
Signed-off-by: Tom Warren <twarren@nvidia.com>
2020-12-04 13:39:15 -07:00
Peter Robinson
fe669925cb arm: tegra: add options for BOOTENV_EFI_SET_FDTFILE_FALLBACK for tegra186
Upstream linux DT naming doesn't align with the U-Boot DT, which may
not always be the case so this allows using BOOTENV_EFI_SET_FDTFILE_FALLBACK
where it might be appropriate for some boards.

Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
Signed-off-by: Tom Warren <twarren@nvidia.com>
2020-12-04 13:30:42 -07:00
Peter Robinson
632fb978a5 arm: tegra: define fdtfile option for distro boot
For booting via UEFI we need to define the fdtfile option so
bootefi has the option to load a fdtfile from disk. For arm64
the kernel dtb is located in a vendor directory so we define
that as nvidia for that architecture.

Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
Signed-off-by: Tom Warren <twarren@nvidia.com>
2020-12-04 13:30:16 -07:00
Marcel Ziswiler
8e487f38cc apalis/colibri_t30: add note about colibri vs. nvidia uart mapping
The following mapping is applicable for Apalis T30:

Apalis UART1: NVIDIA UARTA
Apalis UART2: NVIDIA UARTD
Apalis UART3: NVIDIA UARTB
Apalis UART4: NVIDIA UARTC

The following mapping is applicable for Colibri T30:

Colibri UART-A: NVIDIA UARTA
Colibri UART-B: NVIDIA UARTD
Colibri UART-C: NVIDIA UARTB

Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
Signed-off-by: Tom Warren <twarren@nvidia.com>
2020-12-04 13:21:15 -07:00
AKASHI Takahiro
bb7e71d33c efi_loader: add firmware management protocol for raw image
In this commit, a very simple firmware management protocol driver
is implemented. It will take a binary image in a capsule file and
apply the data using dfu backend storage drivers via dfu_write_by_alt()
interface.

So "dfu_alt_info" variable should be properly set to specify a device
and location to be updated. Please read README.dfu.

Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
2020-12-03 21:22:50 +01:00
AKASHI Takahiro
f27c201485 efi_loader: add firmware management protocol for FIT image
In this commit, a very simple firmware management protocol driver
is implemented. It will take a common FIT image firmware in a capsule
file and apply the data using dfu backend storage drivers via
update_fit() interface.

So "dfu_alt_info" variable should be properly set to specify a device
and location to be updated. Please read README.dfu.

Fit image is a common file format for firmware update on U-Boot, and
this protocol works neatly just as a wrapper for one.

Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
2020-12-03 21:22:50 +01:00
AKASHI Takahiro
8d99026f06 efi_loader: capsule: support firmware update
A capsule tagged with the guid, EFI_FIRMWARE_MANAGEMENT_CAPSULE_ID_GUID,
is handled as a firmware update object.
What efi_update_capsule() basically does is to load any firmware management
protocol (or fmp) drivers contained in a capsule, find out an appropriate
fmp driver and then invoke its set_image() interface against each binary
in a capsule.
In this commit, however, loading drivers is not supported.

The result of applying a capsule is set to be stored in "CapsuleXXXX"
variable, but its implementation is deferred to a fmp driver.

Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
2020-12-03 21:22:50 +01:00
AKASHI Takahiro
ed9349c697 efi_loader: capsule: add memory range capsule definitions
Memory range capsule gives us a way to notify that some memory regions
should be left untouched across the next reset.
See UEFI specification, section 8.5.3.

Since how we should handle this kind of capsule is totally up to
the system, no implementation will be added in this commit.

Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
2020-12-03 21:22:49 +01:00
AKASHI Takahiro
c74cd8bd08 efi_loader: capsule: add capsule_on_disk support
Capsule data can be loaded into the system either via UpdateCapsule
runtime service or files on a file system (of boot device).
The latter case is called "capsules on disk", and actual updates will
take place at the next boot time.

In this commit, we will support capsule on disk mechanism.

Please note that U-Boot itself has no notion of "boot device" and
all the capsule files to be executed will be detected only if they
are located in a specific directory, \EFI\UpdateCapsule, on a device
that is identified as a boot device by "BootXXXX" variables.

Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
2020-12-03 21:22:49 +01:00
AKASHI Takahiro
2bc27ca8a0 efi_loader: define UpdateCapsule api
In this commit, skeleton functions for capsule-related API's are
added under CONFIG_EFI_UPDATE_CAPSULE configuration.
Detailed implementation for a specific capsule type will be added
in the succeeding patches.

Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
2020-12-03 21:22:49 +01:00
Ilias Apalodimas
c8d0fd5825 efi_loader: Introduce eventlog support for TCG2_PROTOCOL
In the previous patches we only introduced a minimal subset of the
EFI_TCG2_PROTOCOL protocol implementing GetCapability().
So let's continue adding features to it, introducing the
GetEventLog() and HashLogExtendEvent() functions.

In order to do that we first need to construct the eventlog in memory,
specifically in EFI_BOOT_SERVICES_DATA memory and a configuration table
from EFI_ACPI_MEMORY_NVS.
U-Boot won't currently add any events to the log or measure any
components, but will expose the necessary EFI APIs for applications
to do so.

Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
2020-12-03 21:22:40 +01:00
Ilias Apalodimas
8e0b0871b8 tpm: Add tpm2 headers for TCG2 eventlog support
A following patch introduces support for the EFI_TCG2_PROTOCOL
eventlog management.
Introduce the necessary tpm related headers

Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
2020-12-03 21:22:40 +01:00
Ilias Apalodimas
e926136bb2 tpm: use more than sha256 on pcr_extend
The current tpm2_pcr_extend is hardcoded using SHA256.
Let's make the actual command to the TPM2 configurable so we can support
a wider range of algorithms and keep the current command line as-is i.e
limited to SHA256 only

Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
2020-12-03 21:22:40 +01:00
Holger Brunck
a6cd384b9c km/common: remove CONFIG_MTD_CONCAT
This was used for a board which is not supproted anymore and can
therefore be dropped.

CC: Stefan Roese <sr@denx.de>
Signed-off-by: Holger Brunck <holger.brunck@hitachi-powergrids.com>
Reviewed-by: Stefan Roese <sr@denx.de>
2020-12-02 16:21:58 -05:00
Holger Brunck
4cb8a10f7e remove obsolete option CONFIG_JFFS2_CMDLINE
This option is obsolete since 2009 and can be removed globally.

CC: Stefan Roese <sr@denx.de>
Signed-off-by: Holger Brunck <holger.brunck@hitachi-powergrids.com>
Reviewed-by: Stefan Roese <sr@denx.de>
2020-12-02 16:21:58 -05:00
Heinrich Schuchardt
9e925d0c47 log: typos in include/log.h
Correct several typos.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
2020-12-02 16:21:58 -05:00
Simon Glass
d211e0418f global_data: Fix comment for dm_driver_rt
This comment is in the wrong format, so reports an error with
'make htmldocs'. Fix it.

Fixes: a294ead8d2 ("dm: Use an allocated array for run-time device info")
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-12-02 16:21:58 -05:00
Simon Glass
d61e784136 log: Fix comment for LOGC_BOOT
This comment is in the wrong format, so reports an error with
'make htmldocs'. Fix it.

Fixes: b73d61a556 ("x86: zimage: Add a little more logging")
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-12-02 16:21:58 -05:00
Andy Shevchenko
3cbb026f17 linux/compat.h: Remove debug() from spin_lock_irqsave()
It seems nobody tested the debug() option in spin_lock_irqsave().
Currently, when #define DEBUG, it spoils the compiler with

In file included from drivers/usb/dwc3/gadget.c:18:
drivers/usb/dwc3/gadget.c: In function ‘dwc3_gadget_set_selfpowered’:
include/log.h:235:4: warning: ‘flags’ is used uninitialized in this function [-Wuninitialized]
  235 |    printf(pr_fmt(fmt), ##args); \
      |    ^~~~~~
drivers/usb/dwc3/gadget.c:1347:17: note: ‘flags’ was declared here
 1347 |  unsigned long  flags;
      |                 ^~~~~

and so on...
Drop useless debug() call to make compiler happy.

Fixes: 0c06db5983 ("lib, linux: move linux specific defines to linux/compat.h")
Cc: Heiko Schocher <hs@denx.de>
Cc: Tom Rini <trini@ti.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com>
Reviewed-by: Heiko Schocher <hs@denx.de>
2020-12-02 16:21:58 -05:00
Holger Brunck
7292a18256 km/arm: coding style clean up
Address most of the checkpatch issues we found in km_arm and common km
code.

CC: Stefan Roese <sr@denx.de>
CC: Valentin Longchamp <valentin.longchamp@hitachi-powergrids.com>
Signed-off-by: Holger Brunck <holger.brunck@hitachi-powergrids.com>
Reviewed-by: Stefan Roese <sr@denx.de>
2020-12-01 14:12:28 -05:00
Patrick Delaunay
310f285e78 hush: Remove default CONFIG_SYS_PROMPT_HUSH_PS2 setting from board files
There is no reason to define default option for this macro which is
already done in common/cli_hush.c.

  87 #ifndef CONFIG_SYS_PROMPT_HUSH_PS2
  88 #define CONFIG_SYS_PROMPT_HUSH_PS2      "> "
  89 #endif

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
Acked-by: Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com>
2020-12-01 14:12:28 -05:00
Simon Glass
d422c77ae8 setexpr: Add some tests for buffer overflow and backref
Add tests to check for buffer overflow using simple replacement as well
as back references. At present these don't fully pass.

Signed-off-by: Simon Glass <sjg@chromium.org>
2020-12-01 10:33:38 -05:00
Simon Glass
7526deec7e command: Add constants for cmd_get_data_size string / error
At present these values are open-coded in a few places. Add constants so
the meaning is clear.

Also add a comment to cmd_get_data_size()

Signed-off-by: Simon Glass <sjg@chromium.org>
2020-12-01 10:33:38 -05:00
Simon Glass
90a9901764 test: Add some tests for setexpr
This command currently has no tests. Add some for basic assignment and the
integer operations.

Note that the default size for setexpr is ulong, which varies depending on
the build machine. So for sandbox on a 64-bit host, this means that the
default size is 64 bits.

Signed-off-by: Simon Glass <sjg@chromium.org>
2020-12-01 10:33:38 -05:00
Tom Rini
a7ab4b71d5 Merge tag 'mmc-2020-11-29' of https://gitlab.denx.de/u-boot/custodians/u-boot-mmc
- mmc minor update for better debug and error check
- fsl_esdhc sysctl set and make sure delay check for HS400
2020-11-29 11:12:59 -05:00
Etienne Carriere
03699bc756 lib/efi_loader: fix ABI in efi_mm_communicate_header
Pack struct efi_mm_communicate_header as done in EDK2 as seen in
release 201808 [1]. If not packed sizeof() for the structure adds
4 additional bytes on 32bit targets which breaks the ABI.

Link: [1] https://github.com/tianocore/edk2/blob/edk2-stable201808/MdePkg/Include/Protocol/MmCommunication.h#L21
Fixes: 23a397d2e2 ("efi_loader: Add headers for EDK2 StandAloneMM communication")
Signed-off-by: Etienne Carriere <etienne.carriere@linaro.org>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
2020-11-29 05:18:37 +01:00
Yangbo Lu
8ee802f899 mmc: fsl_esdhc: make sure delay chain locked for HS400
For eMMC HS400 mode, the DLL reset is a required step for mmc rescan.
This step has not been documented in reference manual, but the RM will
be fixed sooner or later.

In previous commit to support eMMC HS400,
  db8f936 mmc: fsl_esdhc: support eMMC HS400 mode

the steps to configure DLL could be found in commit message,
  13. Set DLLCFG0[DLL_ENABLE] and DLLCFG0[DLL_FREQ_SEL].
  14. Wait for delay chain to lock.

these would be fixed as,
  13.   Set DLLCFG0[DLL_ENABLE] and DLLCFG0[DLL_FREQ_SEL].
  13.1  Write DLLCFG0[DLL_RESET] to 1 and wait for 1us,
        then write DLLCFG0[DLL_RESET]
  14.   Wait for delay chain to lock.

This patch is to add the step of DLL reset, and make sure delay chain
locked for HS400.

Fixes: db8f93672b ("mmc: fsl_esdhc: support eMMC HS400 mode")
Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
2020-11-28 10:39:44 +08:00
Patrick Delaunay
d8d29a4489 reset: stm32: Add support of MCU HOLD BOOT
Handle the register RCC_MP_GCR without SET/CLR registers
but with a direct access to bit BOOT_MCU:
- deassert => set the bit: The MCU will not be in HOLD_BOOT
- assert => clear the bit: The MCU will be set in HOLD_BOOT

With this patch the RCC driver handles the MCU_HOLD_BOOT_R value
added in binding stm32mp1-resets.h

Cc: Fabien DESSENNE <fabien.dessenne@st.com>
Cc: Arnaud POULIQUEN <arnaud.pouliquen@st.com>
Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
2020-11-25 11:32:31 +01:00
Patrick Delaunay
5739ef2bcb usb: dwc2: add "u-boot,force-vbus-detection" for stm32
On some board, the ID pin is not connected so the B session must be
overridden with "u-boot,force_b_session_valid" but the VBus sensing
must continue to be handle.

To managed it, this patch adds a new DT field
"u-boot,force-vbus-detection" to use with "u-boot,force_b_session_valid"

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2020-11-22 13:18:20 +01:00
Tom Rini
12e396303c Pull request for UEFI sub-system for efi-2021-01-rc3 (2)
The parameter check for UEFI service GetNextVariableName() is corrected.
 
 The dependencies of CONFIG_DFU_TFTP are simplified.
 
 The set of supported hash algorithms reported by the EFI_TCG2_PROTOCOL is
 corrected.
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEEbcT5xx8ppvoGt20zxIHbvCwFGsQFAl+5DQgACgkQxIHbvCwF
 GsTbxQ/7BGaaUlowZNMhiD+iPmW+ZlRJQYv+o9yuiV0EnFVTxvFc6lvYxqmwVjQZ
 3Z7bVJo4OvM9QHD6umIFUr/1GghfUbjvS45v0tKYqDBUO0plcO+PF5yr9G10KMhh
 ybDexe9x2hvC8UqF1q76xjqvehIq9zmDrSE44sRlJ7KKnd4plIssRQLQUZrqdxhn
 HR6VdIi1Ooo0hgCAD2z/6yyLJO2gvwNMyOQLf3p3EEuGks4BYB6fWhexBGs0+lTh
 kY/iu2N8vlKwGa5L2b/zNBtpCRum1b05KwVEjwX6lgMWruVmzKvs2PNbPkkNhwc7
 66+YhjRxO2i61uroNHgu/EmJ6gZzCS2+3+tN2uXz+w2Wx+DZ90XLfqpklH1RXQiD
 BhFVjPzbYp5zSsaLCURx368CEktBdqyB2+pNTQ0WHvMXS0UAzGIbUglKvXrVlUsw
 uz17zvqBCXOxkag6vzu6ePWXJ3IEcUDx7N6jT4xaBr8vh7aTzYLZDzq6KP9bjgrw
 6GkDY1v6Kla7hM7nG/VPA+Cu1a7q7kHUjAK4kCQCJyH9bbO6+YojaRyFHxOxDEpf
 WIEAFr4UfJjoq+/dcsPKosFl+m2xebCd1xvJt+OblNAemBOER4sApg8g4W2/TQuH
 PaXuCjbrH0hNBQTkUQeMwkWjN6EHcBcjfbeXSJ9vVlgTp8+zDrA=
 =6U7u
 -----END PGP SIGNATURE-----

Merge tag 'efi-2021-01-rc3-2' of https://gitlab.denx.de/u-boot/custodians/u-boot-efi

Pull request for UEFI sub-system for efi-2021-01-rc3 (2)

The parameter check for UEFI service GetNextVariableName() is corrected.

The dependencies of CONFIG_DFU_TFTP are simplified.

The set of supported hash algorithms reported by the EFI_TCG2_PROTOCOL is
corrected.
2020-11-21 08:04:39 -05:00
Ilias Apalodimas
9aeb380277 efi_loader: tcg2 protocol updates
On pull reuqest
https://lists.denx.de/pipermail/u-boot/2020-November/432735.html
V4 of the patchset was sent instead of the v5.
This is the v4->v5 missing diff

Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
2020-11-21 07:26:16 +01:00
Michal Simek
631a241e48 microblaze: Detect NOR flash based on DT
Remove fixed configuration and detect flash based on DT.

Also increase amount of flash sectors to 2048 because on kc705 flash has
1027 sectors.

Bank # 1: CFI conformant flash (16 x 16)  Size: 128 MB in 1027 Sectors
  Intel Extended command set, Manufacturer ID: 0x89, Device ID: 0x8962
  Erase timeout: 4096 ms, write timeout: 2 ms
  Buffer write timeout: 5 ms, buffer size: 1024 bytes

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-11-20 10:42:54 +01:00
Michal Simek
09996b4d84 microblaze: Unify of setting for SPL_NOR/XIP support
XIP is not enabled in SPL. SPL_NOR is enabled but any macro setting with
using SYS_FLASH_BASE are wrong because it is not aligned with DM.
That's why change these macro and align them with TEXT_BASE macro.
Information should be find at run time based on DT but implementation is
not done yet.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-11-20 10:42:53 +01:00
Michal Simek
a3c43fb01a microblaze: Remove CONFIG_SYS_FDT_SIZE
CONFIG_SYS_FDT_SIZE is not use anywhere that's why remove it.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-11-20 10:42:53 +01:00
Michal Simek
6c5828dc4b microblaze: Get rid of xparameters.h
There is no need to use this file anymore. Include it in main config file
and simplify logic based on it.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-11-20 10:42:53 +01:00
Michal Simek
7556fa09e0 microblaze: Simplify cache handling
Enable caches by default. For now just simplify config file but it should
be read from DT or PVRs.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-11-20 10:42:53 +01:00
Michal Simek
91218f4c24 microblaze: Clean config file from ifdef mess
A lot of configs has been moved to Kconfig and it ends up in ifdef mess
with no bodies. That's why remove all of them.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-11-20 10:42:53 +01:00
Richard Genoud
dd4866b437 fs/squashfs: implement exists() function
This permits to find a file and use the distro_bootcmd

Reviewed-by: Joao Marcos Costa <jmcosta944@gmail.com>
Signed-off-by: Richard Genoud <richard.genoud@posteo.net>
2020-11-19 09:45:49 -05:00
Holger Brunck
c904a0b762 km/ppc: use Kconfig for MEMTEST configuration
Also change back SYS_MEMTEST_END to 0x00f00000. 0xe00000 was wrong and
introduced due to the global Kconfig migration of this option in u-boot.

CC: Heiko Schocher <hs@denx.de>
CC: Tom Rini <trini@konsulko.com>
Signed-off-by: Holger Brunck <holger.brunck@hitachi-powergrids.com>
2020-11-19 09:45:49 -05:00
Matteo Ghidoni
aef04a8aa1 km: replace hardcoded address for imported environment
Instead of using an hard coded address, make use of an
already defined address for importing the environment
for ramfs and nfs boot. This allows boards having different
mapping to use the same code.

CC: Heiko Schocher <hs@denx.de>
CC: Tom Rini <trini@konsulko.com>
Signed-off-by: Matteo Ghidoni <matteo.ghidoni@hitachi-powergrids.com>
Signed-off-by: Holger Brunck <holger.brunck@hitachi-powergrids.com>
2020-11-19 09:45:49 -05:00
Samuel Holland
e210ec0181 sunxi: DT: A64: update device tree files
Import updated device trees from Linux tag v5.9. This picks up new
hardware (PinePhone, PineTab); and it drops the U-Boot specific DTSI
files for the Pinebook and the Teres-I, since the ANX6345 bridge is
now supported upstream.

A couple of headers needed updates for recently-added hardware support.

Acked-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Samuel Holland <samuel@sholland.org>
Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
2020-11-17 00:42:20 +00:00
Tom Rini
9324c9a823 Merge tag 'ti-v2021.01-rc3' of https://gitlab.denx.de/u-boot/custodians/u-boot-ti
- Fix Nokia RX-51 boot issues
- Fix CONFIG_LOGLEVEL on K3 devices
- Add phyBOARD REGOR support
2020-11-16 13:42:29 -05:00
Pali Rohár
e4f7592196 Nokia RX-51: Remove old comments from configs/nokia_rx51.h file
These comments are relict for old, now removed config options.
So remove these obsoleted comments too.

Signed-off-by: Pali Rohár <pali@kernel.org>
2020-11-15 15:29:40 +05:30
Pali Rohár
8d8c181703 Nokia RX-51: Convert to CONFIG_DM_I2C
Use twl4030_i2c_read(), i2c_get_chip_for_busnum() and remove
CONFIG_SYS_I2C.

Signed-off-by: Pali Rohár <pali@kernel.org>
2020-11-15 15:26:25 +05:30
Pali Rohár
4fcc084eeb power: twl4030: Add twl4030_i2c_read() function
Function twl4030_i2c_read() is like twl4030_i2c_read_u8() but instead of
single value it rather returns array of values.

Signed-off-by: Pali Rohár <pali@kernel.org>
Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
2020-11-15 15:25:55 +05:30
Ilias Apalodimas
c1c021052c efi_loader: Add basic EFI_TCG2_PROTOCOL support
Since U-boot EFI implementation is getting richer it makes sense to
add support for EFI_TCG2_PROTOCOL taking advantage of any hardware TPM
available on the device.

This is the initial implementation of the protocol which only adds
support for GetCapability(). It's limited in the newer and safer
TPMv2 devices.

Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Acked-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-11-14 05:05:46 +01:00
Ilias Apalodimas
915e3ae568 tpm: Add some headers from the spec
A following patch introduces EFI_TCG2_PROTOCOL.
Add the required TPMv2 headers to support it.

Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
2020-11-14 05:05:46 +01:00
Heinrich Schuchardt
fccd3d9c42 efi_selftest: keep devices in ExitBootServices()
When calling ExitBootServices during out unit tests we should not detach
devices as we need console output for runtime tests.

Fixes: 529441ca89 ("efi_loader: Disable devices before handing over control")
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-11-14 05:05:46 +01:00
Tom Rini
22ad69b798 patman status subcommand to collect tags from Patchwork
patman showing email replies from Patchwork
 sandbox poweroff command
 minor fixes in binman, tests
 -----BEGIN PGP SIGNATURE-----
 
 iQFFBAABCgAvFiEEslwAIq+Gp8wWVbYnfxc6PpAIreYFAl+kJL8RHHNqZ0BjaHJv
 bWl1bS5vcmcACgkQfxc6PpAIreaDpAf+MajyuxlmGmFTjpyiB026aWiYE4rAn4AE
 bXEDxHpOTIH4hDX7kYVWPmuKivHJo2hF0WUpIFBEAgtc2dOfjOP+mrDjBzG1Pikl
 z5yuilG7eHwC1kTIkPv/tPHwDWRBI5VNwTYq0VTtffMKr8LCBo96wEYEbeYK0xdQ
 kpNa9d4G+tpx20BCRgPLeOMk2pg5SVszkCCkmmPd12rO2zJ9+wWa8fwA759E93Rw
 RshoRCtLNo2nEA3uJVG2aN9n3eAdM/iupDVdBLg50SFKabUxt7OcvGOC8NzGdAmT
 9UbB8scvQJyI/kylGT+ghH3o2RqQGvuIRXmDyETckdkpiqK0SQvysg==
 =eOGz
 -----END PGP SIGNATURE-----

Merge tag 'dm-pull5nov20' of git://git.denx.de/u-boot-dm

patman status subcommand to collect tags from Patchwork
patman showing email replies from Patchwork
sandbox poweroff command
minor fixes in binman, tests
2020-11-06 11:27:14 -05:00
Tom Rini
896cc5aa4a Merge tag 'u-boot-amlogic-20201105' of https://gitlab.denx.de/u-boot/custodians/u-boot-amlogic
- meson64_android: don't show logo on ROM USB boot
- doc: update support matrix and fix vim3/l build instructions
- meson64: relocate config_distro_bootcmmd header
2020-11-06 09:46:43 -05:00
Tom Rini
d062c1344c Merge https://gitlab.denx.de/u-boot/custodians/u-boot-x86
- Add a new SMBIOS parser and enable it when booting from coreboot
- Fix up various driver names to avoid dtoc warnings
- Fully enable ACPI support on Google Chromebook Coral
- Add a way to set SMBIOS properties using the devicetree
- Update existing boards to use devicetree for SMBIOS using a new
  default sysinfo driver
2020-11-06 09:46:43 -05:00
Simon Glass
78227d4eda x86: Pass an ofnode into each SMBIOS function
As a first step to obtaining SMBIOS information from the devicetree, add
an ofnode parameter to the writing functions.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2020-11-06 10:18:20 +08:00
Simon Glass
3a8ee3df83 board: Rename uclass to sysinfo
This uclass is intended to provide a way to obtain information about a
U-Boot board. But the concept of a U-Boot 'board' is the whole system,
not just one circuit board, meaning that 'board' is something of a
misnomer for this uclass.

In addition, the name 'board' is a bit overused in U-Boot and we want to
use the same uclass to provide SMBIOS information.

The obvious name is 'system' but that is so vague as to be meaningless.
Use 'sysinfo' instead, since this uclass is aimed at providing information
on the system.

Rename everything accordingly.

Note: Due to the patch delta caused by the symbol renames, this patch
shows some renamed files as being deleted in one place and created in
another.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2020-11-06 10:18:20 +08:00
Simon Glass
b73d61a556 x86: zimage: Add a little more logging
Add logging for each part of the boot process, using a new

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
2020-11-06 09:51:34 +08:00
Simon Glass
e0028ab75a x86: Boot coral into Chrome OS by default
Add a script to boot Chrome OS from the internal MMC. This involved adding
a few commands and options.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2020-11-06 09:51:32 +08:00
Simon Glass
18434aec1b acpi: Don't reset the tables with every new generation
At present if SSDT and DSDT code is created, only the latter is retained
for examination by the 'acpi items' command. Fix this by only resetting
the list when explicitly requested.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2020-11-06 09:51:31 +08:00
Simon Glass
d2cb7a22da x86: Allow putting some tables in the bloblist
At present all tables are placed starting at address f0000 in memory, and
can be up to 64KB in size. If the tables are very large, this may not
provide enough space.

Also if the tables point to other tables (such as console log or a ramoops
area) then we must allocate other memory anyway.

The bloblist is a nice place to put these tables since it is contiguous,
which makes it easy to reserve this memory for linux using the 820 tables.

Add an option to put some of the tables in the bloblist. For SMBIOS and
ACPI, create suitable pointers from the f0000 region to the new location
of the tables.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
[bmeng: squashed in http://patchwork.ozlabs.org/project/uboot/patch/
 20201105062407.1.I8091ad931cbbb5e3b6f6ababdf3f8d5db0d17bb9@changeid/]
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
2020-11-06 09:51:28 +08:00
Tom Rini
7716c328c8 u-boot-imx for 2021.1
---------------------
 
 - new boards : GE (new B1x5v2), phytec phyCORE-i.MX8MM
 - converted doc to reST
 - fixes for verdin-imx8mm (Toradex)
 - fixes for i.MX thermal driver
 - mx7ulp: Align the PLL_USB frequency
 - mx53: primary/secondary bmode
 
 Travis: https://travis-ci.org/github/sbabic/u-boot-imx/builds/741465284
 -----BEGIN PGP SIGNATURE-----
 
 iG0EABECAC0WIQS2TmnA27QKhpKSZe309WXkmmjvpgUCX6QsVQ8cc2JhYmljQGRl
 bnguZGUACgkQ9PVl5Jpo76Z29ACfRdzFocIVEOFNm8v5yA1C/FU9q9sAn1kEAot5
 vkm2yvDQ7+9vl5G7+ZRn
 =rCCX
 -----END PGP SIGNATURE-----

Merge tag 'u-boot-imx-20201105' of https://gitlab.denx.de/u-boot/custodians/u-boot-imx

u-boot-imx for 2021.1
---------------------

- new boards : GE (new B1x5v2), phytec phyCORE-i.MX8MM
- converted doc to reST
- fixes for verdin-imx8mm (Toradex)
- fixes for i.MX thermal driver
- mx7ulp: Align the PLL_USB frequency
- mx53: primary/secondary bmode

Travis: https://travis-ci.org/github/sbabic/u-boot-imx/builds/741465284
2020-11-05 11:57:50 -05:00
Alper Nebi Yasak
6900797678 cros_ec: Support keyboard scanning with EC_CMD_GET_NEXT_EVENT
The cros_ec_keyb driver currently uses EC_CMD_MKBP_STATE to scan the
keyboard, but this host command was superseded by EC_CMD_GET_NEXT_EVENT
and unavailable on more recent devices (including gru-kevin), as it was
removed in cros-ec commit 87a071941b89 ("mkbp: Add support for buttons
and switches.") dated 2016-07-06.

The EC_CMD_GET_NEXT_EVENT has been available since cros-ec commit
d1ed75815efe ("MKBP event signalling implementation") dated 2014-10-20,
but it looks like it isn't included in firmware-* branches for at least
link, nyan-big, samus, snow, spring, panther and peach-pit which have
defconfigs in U-Boot. So this patch falls back to the old method if the
EC doesn't recognize the newer command.

The implementation is mostly adapted from Depthcharge commit
f88af26b44fc ("cros_ec: Change keyboard scanning method.").

On a gru-kevin, the current driver before this patch fails to read the
pressed keys with:

    out: cmd=0x60: 03 9d 60 00 00 00 00 00
    in-header: 03 fc 01 00 00 00 00 00
    in-data:
    ec_command_inptr: len=-1, din=0000000000000000
    check_for_keys: keyboard scan failed

However the keyboard works fine with the newer command:

    out: cmd=0x67: 03 96 67 00 00 00 00 00
    in-header: 03 ef 00 00 0e 00 00 00
    in-data: 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    ec_command_inptr: len=14, din=00000000f412df30
    key_matrix_decode: num_keys = 0
      0 valid keycodes found
    out: cmd=0x67: 03 96 67 00 00 00 00 00
    in-header: 03 df 00 00 0e 00 00 00
    in-data: 00 00 00 00 00 00 00 00 00 00 00 00 10 00
    ec_command_inptr: len=14, din=00000000f412df30
    key_matrix_decode: num_keys = 1
      valid=1, row=4, col=11
        keycode=28
      1 valid keycodes found
     {0d}

Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2020-11-05 09:11:31 -07:00
Michal Simek
9485a80be1 binman: Fix typo in kernel-doc format for binman_symname()
Fix typo.

Fixes: 1979063264 ("binman: Support accessing binman tables at run time")
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
2020-11-05 09:11:31 -07:00
Heinrich Schuchardt
063790cb62 sandbox: update function descriptions in os.h
Use Sphinx style function descriptions.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
2020-11-05 09:11:31 -07:00
Heinrich Schuchardt
329dccc067 sandbox: implement reset
Up to now the sandbox would shutdown upon a cold reset request. Instead it
should be reset.

In our coding we use static variables like LIST_HEAD(efi_obj_list). A reset
can occur at any time, e.g. via an UEFI binary calling the reset service.
The only safe way to return to an initial state is to relaunch the U-Boot
binary.

The reset implementation uses execv() to relaunch U-Boot.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
2020-11-05 09:11:30 -07:00
Jaehoon Chung
014b9f9676 configs: meson64: relocate config_distro_bootcmmd header
Relocate a config_distro_bootcmd header before defined
CONFIG_EXTRA_ENV_SETTINGS. Otherwise it can't change to specific
environment.

Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
Acked-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2020-11-05 16:27:31 +01:00
Simon Glass
5019e201cc x86: acpi: Store the ACPI context in global_data
At present we create the ACPI context but then drop it after generation of
tables is complete. This is annoying because we have to then search for
tables later.

To fix this, allocate the context and store it in global_data.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2020-11-05 14:58:45 +08:00
Simon Glass
1779b8a96a Add an assembly guard around linux/bitops.h
This file can be included by any header but it includes C code. Guard it
to avoid errors when compiling ASL, etc.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2020-11-05 14:58:45 +08:00
Christian Gmeiner
415eab0655 smbios: add parsing API
Add a very simple API to be able to access SMBIOS strings
like vendor, model and bios version.

Signed-off-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2020-11-05 14:58:45 +08:00
Tom Rini
41cab8edbc Pull request for UEFI sub-system for efi-2021-01-rc2 (2)
The series contains the following enhancements
 
 * preparatory patches for UEFI capsule updates
 * initialization of the emulated RTC using an environment variable
 
 and a bug fix
 
 * If DisconnectController() is called for a child controller that is the
   only child of the driver, the driver must be disconnected.
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEEbcT5xx8ppvoGt20zxIHbvCwFGsQFAl+e1WUACgkQxIHbvCwF
 GsRHhQ//X/hQiow1/3YwskyZkC89QPLE+TDeGcRHdy7W2rjfJlOBJtsI1tzvsTWw
 8etgIuoh1MKebJZZQk/ZxKdWOaN3RWP7wL/9c6PHpkkML+WzyLWShf5UgLMWeo3w
 a7t0LW4kfxbzmhg/f4x0Gi3qUh0SiS6T8Q5X/SlJOX091IvCmCOTkGUT6dBogm78
 WnISQvgP3uApOt2s66hVVtFaH4zbXDYwDnQhhUoonRF1AfuE3jTyr39IoNsCdPOx
 vEbTqNKQQnt4yIIaPJlV+KX//jtCCnyLBPrZA1tI2QPyBjADmNcau2OjlBZyJpr0
 1awgSueXgBtMCAp6bHMl9p3eSKYv2f0BvPGljgKrs9dfIZk+XN0w62VuSYwRi7TU
 ZEppINMisM1hC9+7jKNGn0nE9y3UldBSNThWxk8ykpWL+Btv5KeArHK4+916nadQ
 a7t+6Ow7hiVI1Y/3TWaLvCi7xfqsU87QH6dx0nozgBUotuujIqa5lAeSGR9Rc6N2
 PSblEGf8AA8+oGAdBhNvDncHiRLWkUoBqFsaaAk4EiaHQk60InZ9CpQdeMqHErcx
 uLL9JcOCZeStcWF+vWmyU2L49O88HRHvboM7zA+gqLIUilwgKxmlOocoq+0jtA4l
 Bg72F3cI7+g+aTidskEOGo2v2cj0dh32ub5CqRHLdt3PUzP6qhs=
 =mCEL
 -----END PGP SIGNATURE-----

Merge tag 'efi-2020-01-rc2-2' of https://gitlab.denx.de/u-boot/custodians/u-boot-efi

Pull request for UEFI sub-system for efi-2021-01-rc2 (2)

The series contains the following enhancements

* preparatory patches for UEFI capsule updates
* initialization of the emulated RTC using an environment variable

and a bug fix

* If DisconnectController() is called for a child controller that is the
  only child of the driver, the driver must be disconnected.
2020-11-01 10:56:37 -05:00
Sebastian Reichel
64272efdaf board: ge: b1x5v2: Add GE B1x5v2 and B1x5Pv2
GE B1x5v2 patient monitor series is similar to the CARESCAPE Monitor
series (GE Bx50). It consists of a carrier PCB used in combination
with a Congatec QMX6 SoM. This adds U-Boot support using device model
everywhere and SPL for memory initialization.

Proper configuration is provided as 'ge_b1x5v2_defconfig' and the
combined image u-boot-with-spi.imx can be flashed directly to 1024
byte offset to /dev/mtdblock0. Alternatively SPL and u-boot.imx can
be loaded separately via USB-OTG using e.g. imx_usb.

Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
2020-11-01 16:01:40 +01:00
Teresa Remmet
0cc2a07879 board: phytec: imx8mm: Add PHYTEC phyCORE-i.MX8MM support
Add support PHYTEC phyCORE-i.MX8MM SOM.

Supported features:
 - 2GB LPDDR4 RAM
 - 1x 1Gbit Ethernet
 - eMMC
 - external SD
 - debug UART3
 - watchdog
 - i2c eeprom

Signed-off-by: Teresa Remmet <t.remmet@phytec.de>
2020-11-01 15:58:19 +01:00
Tom Rini
2c31d7e746 Merge tag 'u-boot-rockchip-20201031' of https://gitlab.denx.de/u-boot/custodians/u-boot-rockchip
- New PX30 board: Engicam PX30.Core;
- Fix USB HID support for rock960;
- Remove host endianness dependency for rockchip mkimage;
- dts update for rk3288-tinker;
- Enable console MUX for some ROCKPi boards;
- Add config-based ddr selection for px30;
2020-10-30 23:13:13 -04:00
Tom Rini
63d4607e03 of-platdata and dtoc improvements
sandbox SPL tests
 binman support for compressed sections
 -----BEGIN PGP SIGNATURE-----
 
 iQFFBAABCgAvFiEEslwAIq+Gp8wWVbYnfxc6PpAIreYFAl+cXssRHHNqZ0BjaHJv
 bWl1bS5vcmcACgkQfxc6PpAIreaYuAgAjG05oxt8a4DXhdzGuXBCbehZv2T7X5Lg
 2+i9uwyg3MkKWp0Spm2J+0flWs+1Bynw335hgNVgq+bh29sajOQz2BtgfDKFY+Aw
 D+D16YBEiEuIbIXLzSsv+ct1va83A3JmlxxoaJ7+ZvoN/5Z3ZvJIZ7F4AzmwlAFT
 5pOFgDEfVM4MYFU4R2wZAaJMnYKQrqR5Tvrxecc6OkhvWIgq7j3elE4xOuh2hL/L
 Bz/KM+4Eq+EUALG+quyEzd+gDKoPY2rNOojxS/lg7PRsN6S8engwE+LkcAkMaNG3
 uDVrTYsA8lCJJwso0in25fUy8sEYWaCSVr/82xfRJMWksPajubem7w==
 =9u1O
 -----END PGP SIGNATURE-----

Merge tag 'dm-pull-30oct20' of https://gitlab.denx.de/u-boot/custodians/u-boot-dm

of-platdata and dtoc improvements
sandbox SPL tests
binman support for compressed sections
2020-10-30 15:24:30 -04:00
Heinrich Schuchardt
096912b5fe log: typo logl_pref in documentation
The name of structure element logl_prev is not matched by the
documentation.

%s/logl_pref/logl_prev/

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-10-30 14:38:04 -04:00
Jagan Teki
39c8b2c72a rockchip: Add Engicam PX30.Core EDIMM2.2 Starter Kit
PX30.Core is an EDIMM SOM based on Rockchip PX30 from Engicam.

EDIMM2.2 Starter Kit is an EDIMM 2.2 Form Factor Capacitive
Evaluation Board from Engicam.

PX30.Core needs to mount on top of this Evaluation board for
creating complete PX30.Core EDIMM2.2 Starter Kit.

Add support for it.

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Signed-off-by: Suniel Mahesh <sunil@amarulasolutions.com>
Reviewed-by: Kever Yang<kever.yang@rock-chips.com>
2020-10-30 23:31:26 +08:00
Guillaume La Roque
82f6508ad7 configs: meson64_android: don't show logo on ROM USB boot
When booting from rom usb, skip the boot logo logic as it's possible
that the partition containing the logo does not exist yet.

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Guillaume La Roque <glaroque@baylibre.com>
Signed-off-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
2020-10-30 16:20:26 +01:00
Sean Anderson
00ebb7feb7 doc: Add log kerneldocs to documentation
The functions in log.h are already mostly documented, so add them to the
generated documentation.

Signed-off-by: Sean Anderson <seanga2@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2020-10-30 10:58:07 -04:00
Sean Anderson
89723b9494 test: Add a test for log filter-*
This exercises a few success and failure modes of the log filter-*
commands. log filter-list is not tested because it's purely informational.
I don't think there's a good way to test it except by testing if the output
of the command exactly matches a sample run.

Signed-off-by: Sean Anderson <seanga2@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2020-10-30 10:56:11 -04:00
Sean Anderson
72eda5074b lib: Add getopt
Some commands can get very unweildy if they have too many positional
arguments. Adding options makes them easier to read, remember, and
understand.

This implementation of getopt has been taken from barebox, which has had
option support for quite a while. I have made a few modifications to their
version, such as the removal of opterr in favor of a separate getopt_silent
function. In addition, I have moved all global variables into struct
getopt_context.

The getopt from barebox also re-orders the arguments passed to it so that
non-options are placed last. This allows users to specify options anywhere.
For example, `ls -l foo/ -R` would be re-ordered to `ls -l -R foo/` as
getopt parsed the options. However, this feature conflicts with the const
argv in cmd_tbl->cmd. This was originally added in 54841ab50c ("Make sure
that argv[] argument pointers are not modified."). The reason stated in
that commit is that hush requires argv to stay unmodified. Has this
situation changed? Barebox also uses hush, and does not have this problem.
Perhaps we could use their fix?

I have assigned maintenance of getopt to Simon Glass, as it is currently
only used by the log command. I would also be fine maintaining it.

Signed-off-by: Sean Anderson <seanga2@gmail.com>
2020-10-30 10:56:11 -04:00
Sean Anderson
1c593a105a cmd: log: Add commands to list categories and drivers
This allows users to query which categories and drivers are available on
their system. This allows them to construct filter-add commands without
(e.g.) adjusting the log format to show categories and drivers.

Signed-off-by: Sean Anderson <seanga2@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2020-10-30 10:56:10 -04:00
Sean Anderson
40455a6915 log: Add filter flag to match greater than a log level
This is the complement of the existing behavior to match only messages with
a log level less than a threshold. This is primarily useful in conjunction
with LOGFF_DENY.

Signed-off-by: Sean Anderson <seanga2@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2020-10-30 10:55:26 -04:00
Sean Anderson
62ef81891d test: log: Convert log_test from python to C
When rebasing this series I had to renumber all my log tests because
someone made another log test in the meantime. This involved updaing a
number in several places (C and python), and it wasn't checked by the
compiler. So I though "how hard could it be to just rewrite in C?" And
though it wasn't hard, it *was* tedious. Tests are numbered the same as
before to allow for easier review.

A note that if a test fails, everything after it will probably also fail.
This is because that test won't clean up its filters.  There's no easy way
to do the cleanup, except perhaps removing all filters in a wrapper
function.

Signed-off-by: Sean Anderson <seanga2@gmail.com>
2020-10-30 10:55:26 -04:00
Sean Anderson
fe3b1a2d21 log: Add filter flag to deny on match
Without this flag, log filters can only explicitly accept messages.
Allowing denial makes it easier to filter certain subsystems. Unlike
allow-ing filters, deny-ing filters are added to the beginning of the
filter list. This should do the Right Thing most of the time, but it's
less-universal than allowing filters to be inserted anywhere. If this
becomes a problem, then perhaps log_filter_add* should take a filter number
to insert before/after.

Signed-off-by: Sean Anderson <seanga2@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2020-10-30 10:55:26 -04:00
Sean Anderson
a02f84ee9c log: Add function to create a filter with flags
This function exposes a way to specify flags when creating a filter.

Signed-off-by: Sean Anderson <seanga2@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2020-10-30 10:55:26 -04:00
Sean Anderson
3102c1d2c2 log: Expose some helper functions
These functions are required by "cmd: log: Add commands to manipulate
filters" and "test: Add a test for log filter-*".

Signed-off-by: Sean Anderson <seanga2@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2020-10-30 10:55:26 -04:00
Sean Anderson
b66a924f97 log: Fix incorrect documentation of log_filter.cat_list
Logging category lists are terminated by LOGC_END, not LOGC_NONE.

Fixes: e9c8d49d54 ("log: Add an implementation of logging")

Signed-off-by: Sean Anderson <seanga2@gmail.com>
Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-10-30 10:54:38 -04:00
Heiko Schocher
1229533a2a env: split env_import_redund() into 2 functions
split from env_import_redund() the part which checks
which Environment is valid into a separate function
called env_check_redund() and call it from env_import_redund().

So env_check_redund() can be used from places which also
need to do this checks.

Signed-off-by: Heiko Schocher <hs@denx.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
2020-10-30 10:54:38 -04:00
AKASHI Takahiro
077153e085 efi_loader: add efi_create_indexed_name()
This function will be used from several places in UEFI subsystem
to generate some specific form of utf-16 variable name.
For example, L"Capsule0001"

Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Move function to separate module.
Use char * as argument instead of u16 *.
Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-10-30 14:27:43 +01:00
AKASHI Takahiro
f234566ef0 dfu: add dfu_write_by_alt()
This function is a variant of dfu_write_by_name() and takes a DFU alt
setting number for dfu configuration.

It will be utilised to implement UEFI capsule management protocol for
raw image in a later commit.

Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
2020-10-30 14:20:27 +01:00
AKASHI Takahiro
6beaa47d4f dfu: export dfu_list
This variable will be utilized to enumerate all dfu entities
for UEFI capsule firmware update in a later commit.

Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
2020-10-30 14:20:27 +01:00
AKASHI Takahiro
3149e524fc common: update: add a generic interface for FIT image
The main purpose of this patch is to separate a generic interface for
updating firmware using DFU drivers from "auto-update" via tftp.

This function will also be used in implementing UEFI capsule update
in a later commit.

Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
2020-10-30 14:20:27 +01:00
AKASHI Takahiro
1c2d1293f6 dfu: modify an argument type for an address
The range of an addressable pointer can go beyond 'integer'.
So change the argument type to a void pointer.

Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Reviewed-by: Tom Rini <trini@konsulko.com>
2020-10-30 14:20:27 +01:00
AKASHI Takahiro
045fd8b13d dfu: rename dfu_tftp_write() to dfu_write_by_name()
This function is essentially independent from tftp, and will also be
utilised in implementing UEFI capsule update in a later commit.
So just give it a more generic name.
In addition, a new configuration option, CONFIG_DFU_WRITE_ALT, was
introduced so that the file will be compiled with different options,
particularly one added in a later commit.

Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
2020-10-30 14:20:27 +01:00
Heinrich Schuchardt
3139356446 efi_loader: typo in function description of u16_strnlen
%/u16_strlen/u16_strnlen()/

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-10-30 14:20:27 +01:00
Peter Robinson
e6dcfff8e6 rockchip: Rock960: fix up USB support
Fix up USB config options so keyboards and other USB devices work.

Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
Reviewed-by: Kever Yang<kever.yang@rock-chips.com>
Change-Id: I34b0696e0ac7303186f20c83278dde340399b690
2020-10-30 18:08:30 +08:00
Simon Glass
cb43ac184f dm: Don't allow U_BOOT_DEVICE() when of-platdata is used
With of-platdata, the devicetree is supposed to specify all the devices
in the system. So far this hasn't really mattered since of-platdata still
works correctly.

However, new of-platdata features rely on numbering the devices in a
particular order so that they can be referenced by a single integer. It is
tricky to implement this efficiently when other devices are present in the
build.

To address this, disable use of U_BOOT_DEVICE() when of-platdata is
enabled. This seems acceptable as it is not supposed to be used at all,
except in SPL/TPL, where of-platdata is the recommended approach.

This breaks one non-compliant boards at present: mx6cuboxi

Signed-off-by: Simon Glass <sjg@chromium.org>
(disable CONFIG_IMX_THERMAL for mx6cuboxi to avoid a build error)
2020-10-29 14:42:59 -06:00
Simon Glass
8a38abfc43 dm: Use driver_info index instead of pointer
At present we use a 'node' pointer in the of-platadata phandle_n_arg
structs. This is a pointer to the struct driver_info for a particular
device, and we can use it to obtain the struct udevice pointer itself.

Since we don't know the struct udevice pointer until it is allocated in
memory, we have to fix up the phandle_n_arg.node at runtime. This is
annoying since it requires that SPL's data is writable and adds a small
amount of extra (generated) code in the dm_populate_phandle_data()
function.

Now that we can find a driver_info by its index, it is easier to put the
index in the phandle_n_arg structures.

Update dtoc to do this, add a new device_get_by_driver_info_idx() to look
up a device by drive_info index and update the tests to match.

Signed-off-by: Simon Glass <sjg@chromium.org>
2020-10-29 14:42:18 -06:00
Simon Glass
e41651fffd dm: Support parent devices with of-platdata
At present of-platdata does not provide parent information. But this is
useful for I2C devices, for example, since it allows them to determine
which bus they are on.

Add support for setting the parent correctly, by storing the parent
driver_info index in dtoc and reading this in lists_bind_drivers(). This
needs multiple passes since we must process children after their parents
already have been bound.

Signed-off-by: Simon Glass <sjg@chromium.org>
2020-10-29 14:42:18 -06:00
Simon Glass
a294ead8d2 dm: Use an allocated array for run-time device info
At present we update the driver_info struct with a pointer to the device
that it created (i.e. caused to be bound). This works fine when U-Boot SPL
is stored in read-write memory. But on some platforms, such as Intel
Apollo Lake, it is not possible to update the data memory.

In any case, it is bad form to put this information in a structure that is
in the data region, since it expands the size of the binary.

Create a new driver_rt structure which holds runtime information about
drivers. Update the code to store the device pointer in this instead.
Also update the test check that this works.

Signed-off-by: Simon Glass <sjg@chromium.org>
2020-10-29 14:42:18 -06:00
Simon Glass
b25ff5cbaa dm: test: Add a way to run SPL tests
Add a -u flag for U-Boot SPL which requests that unit tests be run. To
make this work, export dm_test_main() and update it to skip test features
that are not used with of-platdata.

To run the tests:

   $ spl/u-boot-spl -u
   U-Boot SPL 2020.10-rc5 (Oct 01 2020 - 07:35:39 -0600)
   Running 0 driver model tests
   Failures: 0

At present there are no SPL unit tests.

Note that there is one wrinkle with these tests. SPL has limited memory
available for allocation. Also malloc_simple does not free memory
(free() is a nop) and running tests repeatedly causes driver-model to
reinit multiple times and allocate memory. Therefore it is not possible
to run more than a few tests at a time. One solution is to increase the
amount of malloc space in sandbox_spl. This is not a problem for pytest,
since it runs each test individually, so for now this is left as is.

Signed-off-by: Simon Glass <sjg@chromium.org>
2020-10-29 14:42:18 -06:00
Dario Binacchi
970cd91e8c dm: core: fix typo in device.h
Replace 'a the' with 'the' in include/dm/device.h.

Signed-off-by: Dario Binacchi <dariobin@libero.it>
Reviewed-by: Simon Glass <sjg@chromium.org>
2020-10-29 14:42:18 -06:00
Simon Glass
abb9cd30b2 dm: core: Allow dm_warn() to be used in SPL
At present this option is disabled in SPL, meaning that warnings are not
displayed. It is sometimes useful to see warnings in SPL for debugging
purposes.

Add a new Kconfig option to permit this.

Signed-off-by: Simon Glass <sjg@chromium.org>
2020-10-29 14:42:17 -06:00
Simon Glass
a652d9c73a dm: Avoid using #ifdef for CONFIG_OF_LIVE
At present this option results in a number of #ifdefs due to the presence
or absence of the global_data of_root member.

Add a few macros to global_data.h to work around this. Update the code
accordingly.

Signed-off-by: Simon Glass <sjg@chromium.org>
2020-10-29 14:42:17 -06:00
Simon Glass
08c3b88dd1 dm: core: Avoid void * in the of-platdata structs
These pointers point to drivers. Update the definition to make this clear.

Signed-off-by: Simon Glass <sjg@chromium.org>
2020-10-29 14:42:17 -06:00
Simon Glass
3c14083f20 dm: core: Expand the comment for DM_GET_DEVICE()
The current documentation for this is not particularly enlightening. Add
a little more detail.

Signed-off-by: Simon Glass <sjg@chromium.org>
2020-10-29 14:42:17 -06:00
Simon Glass
f4f4123708 binman: Add a way to read the ROM offset
Provide a function to read the ROM offset so that we can store the value
in one place and clients don't need to store it themselves after calling
binman_set_rom_offset().

Signed-off-by: Simon Glass <sjg@chromium.org>
2020-10-29 14:42:17 -06:00
Tom Rini
47754334b1 Xilinx changes for v2021.01-v2
common:
 - Add support for 64bit loadables from SPL
 
 xilinx:
 - Update documentation and record ownership
 - Enable eeprom board detection based legacy and fru formats
 - Add support for FRU format
 
 microblaze:
 - Optimize low level ASM code
 - Enable SPI/I2C
 - Enable distro boot
 
 zynq:
 - Add support for Zturn V5
 
 zynqmp:
 - Improve silicon detection code
 - Enable several kconfig options
 - Align DT with the latest state
 - Enabling security commands
 - Enable and support FPGA loading from SPL
 - Optimize xilinx_pm_request() calling
 
 versal:
 - Some DTs/Kconfig/defconfig alignments
 - Add binding header for clock and power
 
 zynq-sdhci:
 - Add support for tap delay programming
 
 zynq-spi/zynq-qspi:
 - Use clock framework for getting clocks
 
 xilinx-spi:
 - Fix some code issues (unused variables)
 
 serial:
 - Check return value from clock functions in pl01x
 -----BEGIN PGP SIGNATURE-----
 
 iF0EABECAB0WIQQbPNTMvXmYlBPRwx7KSWXLKUoMIQUCX5rH/QAKCRDKSWXLKUoM
 IRPAAJ9SvHR3w1qTc5W+Q5CWBUH5wJbNYQCaA4PpqZCdvyu1+nF5luL6JHhbDgw=
 =hOd7
 -----END PGP SIGNATURE-----

Merge tag 'xilinx-for-v2021.01-v2' of https://gitlab.denx.de/u-boot/custodians/u-boot-microblaze

Xilinx changes for v2021.01-v2

common:
- Add support for 64bit loadables from SPL

xilinx:
- Update documentation and record ownership
- Enable eeprom board detection based legacy and fru formats
- Add support for FRU format

microblaze:
- Optimize low level ASM code
- Enable SPI/I2C
- Enable distro boot

zynq:
- Add support for Zturn V5

zynqmp:
- Improve silicon detection code
- Enable several kconfig options
- Align DT with the latest state
- Enabling security commands
- Enable and support FPGA loading from SPL
- Optimize xilinx_pm_request() calling

versal:
- Some DTs/Kconfig/defconfig alignments
- Add binding header for clock and power

zynq-sdhci:
- Add support for tap delay programming

zynq-spi/zynq-qspi:
- Use clock framework for getting clocks

xilinx-spi:
- Fix some code issues (unused variables)

serial:
- Check return value from clock functions in pl01x
2020-10-29 11:30:15 -04:00
Tom Rini
eca57cafa5 Merge https://gitlab.denx.de/u-boot/custodians/u-boot-fsl-qoriq
- Bug fixes and updates on vid, ls1088a lx2160a and other layerscape
  platforms.
- Add optee_rpmb support for LX2 & Kontron sl28 support
2020-10-29 09:10:24 -04:00
Ashok Reddy Soma
728d21b8c7 mmc: zynq_sdhci: Add common function to set input/output tapdelays
Remove setting tapdelays for different speeds separately. Instead use
the ITAP and OTAP delay values which are read from the device tree.
If the DT does not contain tap delay values, the predefined values
will be used for the same.

Signed-off-by: Ashok Reddy Soma <ashok.reddy.soma@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
2020-10-29 08:55:43 +01:00
Jean-Jacques Hiblot
90a979d788 dm: board: complete the initialization of the muxes in initr_dm()
This will probe the multiplexer devices that have a "u-boot,mux-autoprobe"
property. As a consequence they will be put in their idle state.

Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Pratyush Yadav <p.yadav@ti.com>
2020-10-28 11:48:55 -04:00
Jean-Jacques Hiblot
0ad40b2463 drivers: Add a new framework for multiplexer devices
Add a new subsystem that handles multiplexer controllers. The API is the
same as in Linux.

Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Pratyush Yadav <p.yadav@ti.com>
[trini: Update some error calls to use different functions or pass
        correct arguments]
Signed-off-by: Tom Rini <trini@konsulko.com>
2020-10-28 11:48:32 -04:00
Heinrich Schuchardt
d094a0734c log: allow for message continuation
Some drivers use macro pr_cont() for continuing a message sent via printk.
Hence if we want to convert printk messaging to using the logging system,
we must support continuation of log messages too.

As pr_cont() does not provide a message level we need a means of
remembering the last log level.

With the patch a pseudo log level LOGL_CONT as well as a pseudo log
category LOGC_CONT are introduced. Using these results in the application
of the same log level and category as in the previous log message.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
2020-10-27 13:50:53 -04:00
Heinrich Schuchardt
993a06b614 log: move processing_msg to global data
Replace the static variable processing_msg by a field in the global data.
Make the field bool at it can only be true or false.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
2020-10-27 13:50:53 -04:00
Ashok Reddy Soma
17a42abb40 mmc: Define timing macro's
Define timing macro's for all the available speeds of mmc. This is
done similar to linux. Replace speed macro's used with these new timing
macro's wherever applicable.

Signed-off-by: Ashok Reddy Soma <ashok.reddy.soma@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
2020-10-27 08:13:33 +01:00
Ashok Reddy Soma
7a49a16ec5 Revert "mmc: zynq: parse dt when probing"
This reverts commit 942b5fc032.

This is partial revert of the above commit.

mmc_of_parse() is reading no-1-8-v from device tree and if set,
it is clearing the UHS speed capabilities of cfg->host_caps.
cfg->host_caps &= ~(UHS_CAPS | MMC_MODE_HS200 |
		    MMC_MODE_HS400 | MMC_MODE_HS400_ES);

This is still missing to clear UHS speeds like SDHCI_SUPPORT_SDR104,
SDHCI_SUPPORT_SDR50 and SDHCI_SUPPORT_DDR50.

Even if we clear the flags SDHCI_SUPPORT_XXX in mmc_of_parse(),
these speed flags are getting set again in cfg->host_caps in
sdhci_setup_cfg().

The reason for this is, SDHCI_SUPPORT_XXX flags are cleared
only if controller is not capable of supporting MMC_VDD_165_195 volts.

if (caps & SDHCI_CAN_VDD_180)
	cfg->voltages |= MMC_VDD_165_195;

if (!(cfg->voltages & MMC_VDD_165_195))
	caps_1 &= ~(SDHCI_SUPPORT_SDR104 | SDHCI_SUPPORT_SDR50 |
		    SDHCI_SUPPORT_DDR50);

It means "no-1-8-v", which is read from DT is not coming in to effect.
So it is better we keep the host quirks(SDHCI_QUIRK_NO_1_8_V) to
clear UHS speeds based on no-1-8-v from device tree.

Hence revert the functionality related to no-1-8-v only, rest is fine
in the patch.

Signed-off-by: Ashok Reddy Soma <ashok.reddy.soma@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
2020-10-27 08:13:33 +01:00
Michal Simek
f2b0376010 xilinx: Remove additional newline in config files
Trivial fix.

Fixes: e519f03a18 ("cmd: mem: Remove CONFIG_SYS_MEMTEST_SCRATCH mapping")
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-10-27 08:13:33 +01:00
Michal Simek
c2a2c83278 xilinx: zynq: Change types from u32 to uint32_t
Change parameter type to avoid compilation error:
In file included from ./tools/../lib/rsa/rsa-verify.c:23:0,
                 from tools/lib/rsa/rsa-verify.c:1:
include/u-boot/rsa-mod-exp.h:69:18: error: unknown type name ‘u32’; did you mean ‘__u32’?
 int zynq_pow_mod(u32 *keyptr, u32 *inout);
                  ^~~
                  __u32
include/u-boot/rsa-mod-exp.h:69:31: error: unknown type name ‘u32’; did you mean ‘__u32’?
 int zynq_pow_mod(u32 *keyptr, u32 *inout);
                               ^~~
                               __u32

Fixes: 37e3a36a54 ("xilinx: zynq: Add support to secure images")
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-10-27 08:13:33 +01:00
Michal Simek
305d31885f dm: core: Add support for getting node from aliases
Add support for getting a node/property from aliases.
The similar functionality is provided for chosen node and this
implemenatation is copy of it.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2020-10-27 08:13:32 +01:00
Michal Simek
30f47c0f1b dt-bindings: arm64: versal: Add clk and power headers
Add power and reset headers to be sources by Versal dtses.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-10-27 08:13:32 +01:00
T Karthik Reddy
44d2be8d6a microblaze: Add support for distro boot
Add distro boot support for microblaze and enable jtag, qspi,
dhcp, pxe boot targets for distro boot.
Enable DISTRO_DEFAULTS config in microblaze defconfig and also
enable support for spi xilinx driver & spi vendors to access
spi flash by distro boot.

Signed-off-by: T Karthik Reddy <t.karthik.reddy@xilinx.com>
Signed-off-by: Ashok Reddy Soma <ashok.reddy.soma@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-10-27 08:01:36 +01:00
T Karthik Reddy
581d6a6da7 microblaze: trivial code fixes
Set proper indentation for env variables in microblaze header file.

Signed-off-by: T Karthik Reddy <t.karthik.reddy@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-10-27 08:01:36 +01:00
Ovidiu Panait
f5d8b1a1f9 microblaze: start.S: Use board_init_f_alloc/init in early init
Implement early init by calling generic board_init_f_alloc_reserve and
board_init_f_init_reserve functions:
* drop SYS_MALLOC_F_LEN related code, as allocation and gd->malloc_base
  assignment are taken care of by the generic functions
* drop _gd logic

Cc: Michal Simek <monstr@monstr.eu>
Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com>
2020-10-27 08:01:36 +01:00
Anatolij Gustschin
8c9940d5ec eb_cpu5282: fix CONFIG_DM_VIDEO build warnings
Remove CONFIG_VIDEO dependency to fix board removal warnings.

Signed-off-by: Anatolij Gustschin <agust@denx.de>
Cc: Jens Scharsig <esw@bus-elektronik.de>
2020-10-26 20:55:29 +01:00
Peng Fan
16cc5ad0b4 power: regulator: add dummy helper
Add dummy helper to enabling the header could be included when
DM REGULATOR not enabled.

Signed-off-by: Peng Fan <peng.fan@nxp.com>
2020-10-23 16:38:33 -04:00
Tom Rini
001ab99325 Merge branch 'master' of https://gitlab.denx.de/u-boot/custodians/u-boot-samsung 2020-10-23 09:19:12 -04:00
Tom Rini
2c48370626 Revert "xen: add definitions for console_io"
This reverts commit 16389a74c5.

Signed-off-by: Tom Rini <trini@konsulko.com>
2020-10-23 09:16:01 -04:00
Michael Walle
4ceb5c6db2 board: kontron: add sl28 support
Add basic support for the Kontron SMARC-sAL28 board. This includes just
the bare minimum to be able to bring up the board and boot linux.

For now, the Single and Dual PHY variant is supported. Other variants
will fall back to the basic variant.

In particular, there is no watchdog support for now. This means that you
have to disable the default watchdog, otherwise you'll end up in the
recovery bootloader. See the board README for details.

Signed-off-by: Michael Walle <michael@walle.cc>
Reviewed-by: Tom Rini <trini@konsulko.com>
Tested-by: Heiko Thiery <heiko.thiery@gmail.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-10-23 16:52:09 +05:30
Laurentiu Tudor
284d062ef1 pci: add a few ARI related defines
Add a few defines related to PCI ARI configuration.

Signed-off-by: Laurentiu Tudor <laurentiu.tudor@nxp.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-10-23 16:52:09 +05:30
Heiko Schocher
dddfde5401 rtc: move pcf8563 to Kconfig
add Kconfig option for pcf8563 driver and
run tools/moveconfig.py

Signed-off-by: Heiko Schocher <hs@denx.de>
Reviewed-by: Stefan Roese <sr@denx.de>
2020-10-22 11:26:14 -04:00
AKASHI Takahiro
16389a74c5 xen: add definitions for console_io
Those definitions added are used with HYPERVISOR_console_io().

Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
2020-10-22 11:26:14 -04:00
Chia-Wei, Wang
611a28ce27 reset: ast2500: Use SCU for reset control
The System Control Unit (SCU) controller of Aspeed
SoCs provides the reset control for each peripheral.

This patch refactors the reset method to leverage
the SCU reset control. Thus the driver dependency
on watchdog including dedicated WDT API and reset
flag encoding can be eliminated.

The Kconfig description is also updated accordingly.

Signed-off-by: Chia-Wei, Wang <chiawei_wang@aspeedtech.com>
Reviewed-by: Ryan Chen <ryan_chen@aspeedtech.com>
2020-10-22 11:26:14 -04:00
Dario Binacchi
7438d6a6c4 gpio: fix gpio_request_by_name() description
Replace 'dev->dev' with '@desc->dev' in the gpio_request_by_name function
desc parameter description.

Signed-off-by: Dario Binacchi <dariobin@libero.it>
Reviewed-by: Simon Glass <sjg@chromium.org>
2020-10-22 11:26:14 -04:00
Dario Binacchi
2d1a43be4e dm: core: improve uclass_get_device_by_phandle_id() description
Complete the devp parameter description.

Signed-off-by: Dario Binacchi <dariobin@libero.it>
Reviewed-by: Simon Glass <sjg@chromium.org>
2020-10-22 11:26:14 -04:00
Holger Brunck
0e3eb47605 km/common: change ubicopy variable
Instead having a hard coded value for "cramfsaddr" after compile time,
we change it to take the variable "cramfsaddr" for the ubicopy variable.
This makes sure that ubicopy uses the right address, even when
the value for "cramfsaddr" has changed.

CC: Valentin Longchamp <valentin.longchamp@hitachi-powergrids.com>
CC: Heiko Schocher <hs@denx.de>
CC: Tom Rini <trini@konsulko.com>
Signed-off-by: Holger Brunck <holger.brunck@hitachi-powergrids.com>
Reviewed-by: Heiko Schocher <hs@denx.de>
2020-10-22 11:26:08 -04:00
Holger Brunck
6a0952a332 km: adapt defines and variables for new memory layout
Due to increasing kernel image sizes we get problems when decompressing
the kernel image. To fix this we need to change the addresses where we
load and where we extract the kernel. Also we need to adapt the address
where to load the CRAMFS image and where to load the DTB file.
While at it also harmonize all boards for PPC and ARM to have the
same values. Also we add a new variable "env_version", so that the
userspace is able to detect if this is a u-boot binary with updated
values or not.

CC: Valentin Longchamp <valentin.longchamp@hitachi-powergrids.com>
CC: Heiko Schocher <hs@denx.de>
CC: Tom Rini <trini@konsulko.com>
Signed-off-by: Holger Brunck <holger.brunck@hitachi-powergrids.com>
Reviewed-by: Heiko Schocher <hs@denx.de>
[trini: Remove old values from kmp204x.h]
Signed-off-by: Tom Rini <trini@konsulko.com>
2020-10-22 11:25:33 -04:00
Heinrich Schuchardt
dcf16721c1 lib: print_freq() should output kHz not KHz
In the International System of Units (SI) the prefix kilo is abbreviated as
'k' not 'K'. 'K' is the symbol for Kelvin.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Reviewed-by: Stefan Roese <sr@denx.de>
2020-10-22 09:54:54 -04:00
Holger Brunck
5d57dfad3f km: fix license string and compatible strings
As the ownership is now Hitachi Power Grids, change the license string
and adapt the compatible string in DTS files. For kmeter1.dts we
change it to "keymile,KMETER1" for now, as this is then compliant with
what is submitted to the linux kernel. All other boards don't have
a upstreamed version in linux mainline.

Signed-off-by: Holger Brunck <holger.brunck@hitachi-powergrids.com>
CC: Valentin Longchamp <valentin.longchamp@hitachi-powergrids.com>
CC: Heiko Schocher <hs@denx.de>
CC: Marek Vasut <marex@denx.de>
CC: Tom Rini <trini@konsulko.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
2020-10-22 09:54:54 -04:00
Sean Anderson
8af7bb914f timer: Return count from timer_ops.get_count
No timer drivers return an error from get_count. Instead of possibly
returning an error, just return the count directly.

Signed-off-by: Sean Anderson <seanga2@gmail.com>
Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2020-10-22 09:54:53 -04:00
Sean Anderson
aff60aba6c doc: Document timer API
This adds kerneldocs for <timer.h>.

I don't know who should maintain doc/api/timer.rst, since the timer
subsystem seems to be maintained by SoC maintainers. MAINTAINERS is left
un-updated for the moment.

Signed-off-by: Sean Anderson <seanga2@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2020-10-22 09:54:53 -04:00
Heinrich Schuchardt
c670aeee3d common: rename getc() to getchar()
The sandbox is built with the SDL2 library with invokes the X11 library
which in turn calls getc(). But getc() in glibc is defined as

    int getc(FILE *)

This does not match our definition.

    int getc(void)

The sandbox crashes when called with parameter -l.

Rename our library symbol getc() to getchar().

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2020-10-22 09:54:53 -04:00
Naoki Hayama
898a084953 cosmetic: image: Fix comments and the order of definitions
Fix some comments about functions.
Move genimg_get_comp_name() above genimg_get_short_name() because
genimg_get_comp_name() is related to get_table_entry_name().

Signed-off-by: Naoki Hayama <naoki.hayama@lineo.co.jp>
Reviewed-by: Simon Glass <sjg@chromium.org>
2020-10-22 09:54:52 -04:00
Naoki Hayama
02d41b01bd image: Add a function to modify category information
Add a generic function which can check whether a category has an
entry ID.

Signed-off-by: Naoki Hayama <naoki.hayama@lineo.co.jp>
Reviewed-by: Simon Glass <sjg@chromium.org>
2020-10-22 09:54:52 -04:00
Simon Glass
8021296a71 log: Add missing category names
Add some category names that were missed in recent changes. Update the
comment as a reminder.

Signed-off-by: Simon Glass <sjg@chromium.org>
2020-10-22 09:53:31 -04:00
Tom Rini
5d92dacbbe Pull request for UEFI sub-system for efi-2021-01-rc1 (2)
A use after free in the UEFI network stack is fixed.
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEEbcT5xx8ppvoGt20zxIHbvCwFGsQFAl+N/tQACgkQxIHbvCwF
 GsTxbBAAmiql4LcM9DeSZPjRpza92PeYcsu0ZErvRgFJ2HdY88RpvK3UBeJRul2y
 CqdajQmusPX3mcCdwKVdLPiesAhDq5bOuZ5OPwixpkYr8QgFavkvN2YQLYm1Qzc7
 wc21QKET82lp4Xzc9qnIPtOheP6GPwN3Bvpgy2OaRviqiD82Ezp59D/9hjw5vu0p
 /SzFibYzZqyGGJiNk3sRSmxPa+mTZ1Zd3hq+ZFDEyw3SNcWtJ5bhFv/sl0CWVOOJ
 HGRVh6KfgW63ZNwyy4NYojUE5H62+l+AMYeNYf1zdFWtS2y1dxP3sP7IP/UizA3C
 UAYuq8qIuz8F1Hue29bbZcPVvge5bBou0B7ocO2B7mOqkr3ttKVBjXuJkkuTc4nm
 DcpqVZsbTV8gdmFNeX7BEAWjCGnzWxjlG8AOdb3VQHX/Trx1n1NxIerqF5pNny6w
 Vakh71DAxT782YoCHzJG3NJfRwLek7XfedNZhpbWgLd+uSIgDotMxyoMVYLxN3Vz
 98ejZ0XP9XDFgrpNjQqmBC3Re+CSmU3n8amIyG8SHkd4QiroCC0O7qRhamjq1JAu
 w2XsPfaJyOJ9ugzy+LB5/SbRPMlZu6Cr3wahNyBmpOmGyDOpRwKXJB7gjljMndnQ
 IXVw3ADpqHyymsOikD/NDCSvJQWWWIGtPMpzT0CjWGfa6iwZmBU=
 =YCCZ
 -----END PGP SIGNATURE-----

Merge tag 'efi-2021-01-rc1-2' of https://gitlab.denx.de/u-boot/custodians/u-boot-efi

Pull request for UEFI sub-system for efi-2021-01-rc1 (2)

A use after free in the UEFI network stack is fixed.
2020-10-21 19:13:05 -04:00
Tom Rini
adc0c39633 Merge https://gitlab.denx.de/u-boot/custodians/u-boot-sh
- Assorted R-Car Gen3 updates
2020-10-20 08:02:53 -04:00
Lad Prabhakar
fc5e552209 arm: dts: r8a774c0: Import DTS from Linux 5.9
Import R8A774C0 (RZ/G2E) SoC DTSI and headers from Linux 5.9
commit bbf5c979011a ("Linux 5.9").

Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com>
2020-10-20 12:56:51 +02:00
Chunfeng Yun
d92e866f60 usb: common: add define of usb_speed_string()
There is only declaration of usb_speed_string(), but no definition,
so add it to avoid build error when call it.

Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2020-10-20 00:49:05 +02:00
Chunfeng Yun
a4de6e380f usb: add USB_SPEED_SUPER_PLUS
Add enum USB_SPEED_SUPER_PLUS for USB3.1

Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2020-10-20 00:49:05 +02:00
Patrick Wildt
36ea0cab26 net: add a define for the number of packets received as batch
With a define for the magic number of packets received as batch
we can make sure that the EFI network stack caches the same amount
of packets.

Signed-off-by: Patrick Wildt <patrick@blueri.se>
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-10-19 22:59:53 +02:00
Tom Rini
7ec87e4192 Second set of u-boot-atmel features for 2021.01 cycle
-----BEGIN PGP SIGNATURE-----
 
 iQFQBAABCgA6FiEEqxhEmNJ6d7ZdeFLIHrMeAg6sL8gFAl+NMmQcHGV1Z2VuLmhy
 aXN0ZXZAbWljcm9jaGlwLmNvbQAKCRAesx4CDqwvyLnEB/0cWFfjDfCMY1o7R4QX
 DeDRlD6k6acQWlwa5EiRKwpbPMJKrSI/m5alMCYZG6YHvGtzihqnqohz3gl1sepi
 W7eyyyFsM4hqe4P3lSETJRGWe/O8bNkoa0hBzqZ9btqw2OJLBu4JYB+zKgz8kaDY
 jzkGLgaaK6wtG3rEu+q4fjzp1y9kuz31WnN+9qS8jd/9UH13XKCkJl9TfY5pLfgc
 mmbn2NWtAhi91uShcnIsOpLaNm23IV0ITa22etB9F1docZuUrbhOtiIF45AADjpG
 /xtkV3dEVGml3N/17RizgOwxX3xughG0ak9xifsK6tfgqfVhaGMgkToNNBM+1ddm
 rZZM
 =hF12
 -----END PGP SIGNATURE-----

Merge tag 'u-boot-atmel-2021.01-b' of https://gitlab.denx.de/u-boot/custodians/u-boot-atmel

Second set of u-boot-atmel features for 2021.01 cycle:

This feature set brings the rework of the clock tree for sam9x60 SoC.
This makes the clock tree fully compatible with Common Clock Framework
and allows full clock configuration in U-Boot. This means that the
sam9x60 boards can boot now using U-Boot.
This also includes the definitions for sam9x60 SiPs and a divisor fix
for the clock on sama7g5 SoC.
2020-10-19 09:29:05 -04:00
Claudiu Beznea
53040bc4d9 board: atmel: sam9x60ek: add SYS_MALLOC_F_LEN to SYS_INIT_SP_ADDR
Heap base address is computed based on SYS_INIT_SP_ADDR by
subtracting the SYS_MALLOC_F_LEN value in
board_init_f_init_reserve().

Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
2020-10-19 09:19:53 +03:00
Patrick Delaunay
8fc78fc73b configs: migrate CONFIG_BMP_16/24/32BPP to defconfigs
Done with:
./tools/moveconfig.py BMP_16BPP BMP_24BPP BMP_32BPP

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2020-10-18 15:27:01 +02:00
Patrick Delaunay
f9a48654ee configs: migrate CONFIG_VIDEO_BMP_RLE8 to defconfigs
Done with:
./tools/moveconfig.py VIDEO_BMP_RLE8

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2020-10-18 15:26:14 +02:00
Patrick Delaunay
0ed6c0f9cb configs: migrate CONFIG_VIDEO_BMP_GZIP to defconfigs
Done with:
./tools/moveconfig.py VIDEO_BMP_GZIP

The 3 suspicious migration because CMD_BMP and SPLASH_SCREEN
are not activated in these defconfigs:
- trats_defconfig
- s5pc210_universal_defconfig
- trats2_defconfig

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2020-10-18 15:25:28 +02:00
Neil Armstrong
01c9857fa8 video: dw-mipi-dsi: permit configuring the escape clock rate
The Amlogic D-PHY in the Amlogic AXG SoC Family does support a frequency
higher than 10MHz for the TX Escape Clock, thus make the target rate
configurable.

This is based on the Linux commit [1] and adapted to the U-Boot driver.

[1] a328ca7e4af3 ("drm/bridge: dw-mipi-dsi: permit configuring the escape clock rate")

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2020-10-18 10:36:05 +02:00
Neil Armstrong
b53c122631 video: dw-mipi-dsi: driver-specific configuration of phy timings
The timing values for dw-dsi are often dependent on the used display and
according to Philippe Cornu will most likely also depend on the used phy
technology in the soc-specific implementation.

To solve this and allow specific implementations to define them as needed
add a new get_timing callback to phy_ops and call this from the dphy_timing
function to retrieve the necessary values for the specific mode.

This is based on the Linux commit [1] and adapted to the U-Boot driver.

[1] 25ed8aeb9c39 ("drm/bridge/synopsys: dsi: driver-specific configuration of phy timings")

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2020-10-18 10:35:06 +02:00
Sean Anderson
4a1989c0bc dm: Don't undefine dev_xxx macros
Now that linux/compat.h does not define these macros, we do not need to
undefine them.

Signed-off-by: Sean Anderson <seanga2@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2020-10-16 09:44:27 -04:00
Sean Anderson
69dae8902b linux/compat.h: Remove redefinition of dev_xxx macros
All users of these functions now include dm/device_compat.h directly.

Signed-off-by: Sean Anderson <seanga2@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2020-10-16 09:44:27 -04:00
Tom Rini
9dc6aef8c9 Merge tag 'mmc-2020-10-14' of https://gitlab.denx.de/u-boot/custodians/u-boot-mmc
- fsl_esdhc_imx cleanup
- not send cm13 if send_status is 0.
- Add reinit API
- Add mmc HS400 for fsl_esdhc
- Several cleanup for fsl_esdhc
- Add ADMA2 for sdhci
2020-10-15 08:20:42 -04:00
Andre Heider
c87afd39d1 configs: smdkv310: get rid of unused EXYNOS4_DEFAULT_UART_OFFSET
Unused.

Signed-off-by: Andre Heider <a.heider@gmail.com>
Acked-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2020-10-15 13:33:22 +09:00
Andre Heider
9c04265f76 treewide: configs: fold CONFIG_DEFAULT_CONSOLE
In prepartion to remove CONFIG_DEFAULT_CONSOLE, fold the current users.

Signed-off-by: Andre Heider <a.heider@gmail.com>
Acked-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2020-10-15 13:33:22 +09:00
Andre Heider
ac79cfc2a4 treewide: configs: get rid of unused CONFIG_DEFAULT_CONSOLE
These are all unused.

Signed-off-by: Andre Heider <a.heider@gmail.com>
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Acked-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2020-10-15 13:33:22 +09:00
Tom Rini
0f35d96bfd Merge https://gitlab.denx.de/u-boot/custodians/u-boot-marvell
- Octeon TX: Add NAND driver (Suneel)
- Octeon TX: Add NIC driver driver (Suneel)
- Octeon TX2: Add NIC driver driver (Suneel)
- Armada 8040: Add iEi Puzzle-M80 board support (Luka)
- Armada A37xx SPI: Add support for CS-GPIO (George)
- Espressobin: Use Linux model/compatible strings (Andre)
- Espressobin: Add armada-3720-espressobin-emmc.dts from Linux (Andre)
- Armada A37xx: Small cleanup of config header (Pali)
2020-10-14 13:51:56 -04:00
Heinrich Schuchardt
0c7cd15f3f global_data.h: add Sphinx documentation
Add the missing Sphinx documentation for struct global_data and
gd_board_type().

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
2020-10-14 11:16:34 -04:00
Heinrich Schuchardt
c82a97bc5c global_data.h: convert GD_FLG_* to enum
Sphinx documentation is only available for enums not for #defines.
Anyway it is better to keep related definitions in an enum.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
2020-10-14 11:16:34 -04:00
Heinrich Schuchardt
73fdb9558e bootm: add {arch,board}_preboot_os() to bootm.h
Functions that are used in multiple C modules should be defined in an
include.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Reviewed-by: Michael Walle <michael@walle.cc>
2020-10-14 11:16:34 -04:00
Frédéric Danis
9ea0a1ee93 cmd: Fixup DT to pass PStore Ramoops parameters
To simplify configuration and keep synchronized the PStore/Ramoops between
U-Boot and the Linux kernel, this commit dynamically adds the Ramoops
parameters defined in the U-Boot session to the Device Tree.

Signed-off-by: Frédéric Danis <frederic.danis@collabora.com>
Cc: Tom Rini <trini@konsulko.com>
Cc: Heinrich Schuchardt <xypron.glpk@gmx.de>
Cc: Wolfgang Denk <wd@denx.de>
Cc: Heiko Schocher <hs@denx.de>
2020-10-14 11:16:34 -04:00
Michael Walle
361a422b90 mmc: fsl_esdhc: add ADMA2 support
Newer eSDHC controllers support ADMA2 descriptor tables which support
64bit DMA addresses. One notable user of addresses in the upper memory
segment is the EFI loader.

If support is enabled, but the controller doesn't support ADMA2, we
will fall back to SDMA (and thus 32 bit DMA addresses only).

Signed-off-by: Michael Walle <michael@walle.cc>
2020-10-14 14:00:44 +08:00
Pali Rohár
8369886b40 arm: mvebu: Remove old comments from configs/mvebu_armada-37xx.h file
These comments are relict for old, now removed config options.
So remove these obsoleted comments too.

Signed-off-by: Pali Rohár <pali@kernel.org>
Reviewed-by: Stefan Roese <sr@denx.de>
2020-10-14 07:56:17 +02:00
Philippe Reynes
a6982a6f76 fit: cipher: aes: allow to store the IV in the FIT image
Binaries may be encrypted in a FIT image with AES. This
algo needs a key and an IV (Initialization Vector). The
IV is provided in a file (pointer by iv-name-hint in the
ITS file) when building the ITB file.

This commits adds provide an alternative way to manage
the IV. If the property iv-name-hint is not provided in
the ITS file, the tool mkimage will generate an random
IV and store it in the FIT image.

Signed-off-by: Philippe Reynes <philippe.reynes@softathome.com>
2020-10-12 21:30:37 -04:00
Tom Rini
9885313b9a Merge branch 'for-next' of https://github.com/lftan/u-boot 2020-10-12 07:55:17 -04:00
Tom Rini
47e9c70421 Merge tag 'ti-v2021.01-rc1' of https://gitlab.denx.de/u-boot/custodians/u-boot-ti
- Minor cleanup on K3 env variables
- Fix OSPI compatible for J721e
- Drop unused property in omap-usb2-phy
- Update Maintainer for am335x-guardian board.
2020-10-12 07:26:57 -04:00
Michael Walle
4d6a773b1c mmc: sdhci: move the ADMA2 table handling into own module
There are other (non-SDHCI) controllers which supports ADMA2 descriptor
tables, namely the Freescale eSDHC. Instead of copying the code, move it
into an own module.

Signed-off-by: Michael Walle <michael@walle.cc>
2020-10-12 15:50:19 +08:00
Yangbo Lu
db8f93672b mmc: fsl_esdhc: support eMMC HS400 mode
The process for eMMC HS400 mode for eSDHC is,

1. Perform the Tuning Process at the HS400 target operating frequency.
   Latched the clock division value.
2. if read transaction, then set the SDTIMNGCTL[FLW_CTL_BG].
3. Switch to High Speed mode and then set the card clock frequency to
   a value not greater than 52Mhz
4. Clear TBCTL[TB_EN],tuning block enable bit.
5. Change to 8 bit DDR Mode
6. Switch the card to HS400 mode.
7. Set TBCTL[TB_EN], tuning block enable bit.
8. Clear SYSCTL[SDCLKEN]
9. Wait for PRSSTAT[SDSTB] to be set
10. Change the clock division to latched value.Set TBCTL[HS 400 mode]
    and Set SDCLKCTL[CMD_CLK_CTRL]
11. Set SYSCTL[SDCLKEN]
12. Wait for PRSSTAT[SDSTB] to be set
13. Set DLLCFG0[DLL_ENABLE] and DLLCFG0[DLL_FREQ_SEL].
14. Wait for delay chain to lock.
15. Set TBCTL[HS400_WNDW_ADJUST]
16. Again clear SYSCTL[SDCLKEN]
17. Wait for PRSSTAT[SDSTB] to be set
18. Set ESDHCCTL[FAF]
19. Wait for ESDHCCTL[FAF] to be cleared
20. Set SYSCTL[SDCLKEN]
21. Wait for PRSSTAT[SDSTB] to be set.

Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
2020-10-12 15:46:34 +08:00
Yangbo Lu
d271e10581 mmc: add a mmc_hs400_prepare_ddr() interface
Add a mmc_hs400_prepare_ddr() interface for controllers
which needs preparation before switching to DDR mode for
HS400 mode.

Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
2020-10-12 15:46:34 +08:00
Yangbo Lu
8c96880814 mmc: add a hs400_tuning flag
Some controllers may have difference between HS200 tuning
and HS400 tuning, such as different registers setting,
different procedure, or different errata.

This patch is to add a hs400_tuning flag to identify the
tuning for HS400 mode.

Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
2020-10-12 15:46:32 +08:00
Yangbo Lu
b1a4247b41 mmc: fsl_esdhc: support tuning for eMMC HS200
Support tuning process for eMMC HS200 for eSDHC.

Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
2020-10-12 15:46:29 +08:00
Yangbo Lu
390f9bddb9 mmc: add a reinit() API
For DM_MMC, the controller re-initialization is needed to
clear old configuration for mmc rescan.

Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
2020-10-12 15:45:39 +08:00
Nishanth Menon
87b4521fd8 configs: am65x_evm: Use DEFAULT_LINUX_BOOT_ENV and remove overlayaddr
Use DEFAULT_LINUX_BOOT_ENV to define the standard addresses used in rest
of TI platforms as defined in ti_armv7_common.h

This avoids the standard pitfalls we've had with kernel images and fdt
addresses stomping on each other.

As part of this process, redefine overlayaddr to be dtboaddr (defined
in ti_armv7_common.h for this very purpose) and get rid of the
definition of overlayaddr..

Signed-off-by: Nishanth Menon <nm@ti.com>
2020-10-12 08:09:53 +05:30
Nishanth Menon
a9cdba9cc1 configs: j721e_evm: Get rid of overlayaddr
Now that we dont have any further users of overlayaddr, get rid of it.

Signed-off-by: Nishanth Menon <nm@ti.com>
2020-10-12 08:09:53 +05:30
Nishanth Menon
cb56936ce5 env: ti: ufs: Use dtboaddr instead of overlayaddr
Use dtboaddr to define the overlay address common to all TI platforms
instead of creating a new overlayaddr for the purpose.

Signed-off-by: Nishanth Menon <nm@ti.com>
2020-10-12 08:09:53 +05:30
Nishanth Menon
25364f5ec8 configs: j721e_evm: Use DEFAULT_LINUX_BOOT_ENV
Use DEFAULT_LINUX_BOOT_ENV to define the standard addresses used in rest
of TI platforms as defined in ti_armv7_common.h

This avoids the standard pitfalls we've had with kernel images and fdt
addresses stomping on each other.

As part of this process, redefine overlayaddr to be dtboaddr (defined
in ti_armv7_common.h for this very purpose).. we will get rid of
overlayaddr later in the series.

Signed-off-by: Nishanth Menon <nm@ti.com>
2020-10-12 08:09:53 +05:30
Sean Anderson
c3f0278e29 net: Expose some errors generated in net_init
net_init does not always succeed, and there is no existing mechanism to
discover errors. This patch allows callers of net_init (such as net_init)
to handle errors. The root issue is that eth_get_dev can fail, but
net_init_loop doesn't expose that. The ideal way to fix eth_get_dev would
be to return an error with ERR_PTR, but there are a lot of callers, and all
of them just check if it's NULL. Another approach would be to change the
signature to something like

int eth_get_dev(struct udevice **pdev)

but that would require rewriting all of the many callers.

Signed-off-by: Sean Anderson <seanga2@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2020-10-10 16:50:12 -04:00
Simon Glass
3d03ab6361 log: Add a way to enable/disable a log device
At present all log devices are enabled by default. Add a function to allow
devices to be disabled or enabled at runtime.

Signed-off-by: Simon Glass <sjg@chromium.org>
2020-10-10 16:50:11 -04:00
Simon Glass
b45203004e log: Add a flag to enable log drivers
At present there is no way to disable a log driver. But the syslog driver
causes (attempted) network traffic in sandbox every time a log message
is printed, which is often.

Add a flag to enable a log driver. Adjust struct log_device to use a short
for next_filter_num so that no more memory is used for devices. Also fix
a missing line in the struct log_driver comment while here.

To maintain compatibility, enable it for all drivers for now.

Signed-off-by: Simon Glass <sjg@chromium.org>
2020-10-10 16:50:11 -04:00
Simon Glass
52d3df7fef log: Allow LOG_DEBUG to always enable log output
At present if CONFIG_LOG enabled, putting LOG_DEBUG at the top of a file
(before log.h inclusion) causes _log() to be executed for every log()
call, regardless of the build- or run-time logging level.

However there is no guarantee that the log record will actually be
displayed. If the current log level is lower than LOGL_DEBUG then it will
not be.

Add a way to signal that the log record should always be displayed and
update log_passes_filters() to handle this.

With the new behaviour, log_debug() will always log if LOG_DEBUG is
enabled.

Move log_test_syslog_nodebug() into its own file since it cannot be made
to work where it is, with LOG_DEBUG defined.

Signed-off-by: Simon Glass <sjg@chromium.org>
2020-10-10 16:49:58 -04:00
Chee Hong Ang
d2170168dd fpga: altera: Rename Stratix10 FPGA to Intel FPGA SDM Mailbox
Rename Stratix10 FPGA driver to Intel FPGA SDM Mailbox driver
because it is using generic SDM (Secure Device Manager) Mailbox
interface shared by other platform (e.g. Agilex) as well.

Signed-off-by: Chee Hong Ang <chee.hong.ang@intel.com>
Reviewed-by: Ley Foon Tan <ley.foon.tan@intel.com>
2020-10-09 17:53:12 +08:00
Andre Przywara
3d8d9186c3 qemu-arm: Remove need to specify flash banks
Currently we hard-code the number and initial addresses of QEMU's flash
banks, even though our code is perfectly able to gather the same
information from the DTB provided by QEMU.
This is especially annoying, since we have two slightly different
U-Boot configurations ("bare-metal" vs. loaded via Arm Trusted
Firmware), which need to be selected at build time.

Drop the two hard coded alternatives, and use
CONFIG_SYS_MAX_FLASH_BANKS_DETECT instead, which relies on the DTB to
figure out the actual flash configuration at runtime.

Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2020-10-08 11:42:36 -04:00
Sean Anderson
7224d5ccf8 pinctrl: Add support for Kendryte K210 FPIOA
The Fully-Programmable Input/Output Array (FPIOA) device controls pin
multiplexing on the K210. The FPIOA can remap any supported function to any
multifunctional IO pin. It can also perform basic GPIO functions, such as
reading the current value of a pin. However, GPIO functionality remains
largely unimplemented (in favor of the dedicated GPIO peripherals).

Signed-off-by: Sean Anderson <seanga2@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2020-10-08 11:42:36 -04:00
Sean Anderson
7f0f1806e3 test: pinmux: Add test for pin muxing
This extends the pinctrl-sandbox driver to support pin muxing, and adds a
test for that behaviour. The test is done in C and not python (like the
existing tests for the pinctrl uclass) because it needs to call
pinctrl_select_state.  Another option could be to add a command that
invokes pinctrl_select_state and then test everything in
test/py/tests/test_pinmux.py.

The pinctrl-sandbox driver now mimics the way that many pinmux devices
work.  There are two groups of pins which are muxed together, as well as
four pins which are muxed individually. I have tried to test all normal
paths. However, very few error cases are explicitly checked for.

Signed-off-by: Sean Anderson <seanga2@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2020-10-08 11:42:36 -04:00
Sean Anderson
5eee93e5b1 pinctrl: Reformat documentation in dm/pinctrl.h
This normalizes the documentation to conform to kernel-doc style [1]. It
also moves the documentation for pinctrl_ops inline, and adds argument and
return-value documentation. I have kept the usual function style for these
comments. I could not find any existing examples of function documentation
inside structs.

[1] https://www.kernel.org/doc/html/latest/doc-guide/kernel-doc.html

Signed-off-by: Sean Anderson <seanga2@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2020-10-08 11:42:36 -04:00
Sean Anderson
9c08fbfc95 pinctrl: Add pinmux property support to pinctrl-generic
The pinmux property allows for smaller and more compact device trees,
especially when there are many pins which need to be assigned individually.
Instead of specifying an array of strings to be parsed as pins and a
function property, the pinmux property contains an array of integers
representing pinmux groups. A pinmux group consists of the pin identifier
and mux settings represented as a single integer or an array of integers.
Each individual pin controller driver specifies the exact format of a
pinmux group. As specified in the Linux documentation, a pinmux group may
be multiple integers long. However, no existing drivers use multi-integer
pinmux groups, so I have chosen to omit this feature. This makes the
implementation easier, since there is no need to allocate a buffer to do
endian conversions.

Support for the pinmux property is done differently than in Linux.  As far
as I can tell, inversion of control is used when implementing support for
the pins and groups properties to avoid allocating. This results in some
duplication of effort; every property in a config node is parsed once for
each pin in that node. This is not such an overhead with pins and groups
properties, since having multiple pins in one config node does not occur
especially often. However, the semantics of the pinmux property make such a
configuration much more appealing. A future patch could parse all config
properties at once and store them in an array. This would make it easier to
create drivers which do not function solely as callbacks from
pinctrl-generic.

This commit increases the size of the sandbox build by approximately 48
bytes.  However, it also decreases the size of the K210 device tree by 2
KiB from the previous version of this series.

The documentation has been updated from the last Linux commit before it was
split off into yaml files.

Signed-off-by: Sean Anderson <seanga2@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2020-10-08 11:42:36 -04:00
Tom Rini
1c431f118c - mips: octeon: add support for DDR4 memory controller
- mips: octeon: add support for DWC3 USB
 - mips: octeon: add support for booting Linux
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEiQkHUH+J02LLC9InKPlOlyTyXBgFAl9+Ie4ACgkQKPlOlyTy
 XBg5lw//TEk6avR1/G4/SKe2Mj2hDQGm2OKjx5BLG6LC/m+It8lk5hFGCKeRTS3m
 zlQ1z4Rki05Q/HW8fZfUSNZTGwbp1n5WJWMx5PRB2T4zYYeoktxQo6dRLbmR9mxL
 2tiZ3QV3qzJafcwy1xdddr2GRGpRyu/sPHnEf5iHtijfT+6MPqSY5E1An+mAGhGb
 IOjzh/OtmO+4Hu9zlp4G5AhNoQBBRRZg+2Sm+kVrzLyM345byucNpnnFiCT1T54M
 iB3KsijBBvcnZ/bR7WMB+x942uFQi9hWdK0ngQhhOO4W1/Mf2ILst44gcxiJQNaf
 dNIEdQxOeL1JDurQL/GSo4cQIr2mXlt3FtTB8RH8sAf9+aMJjlVqYaX3PGUFQJ5B
 z5hnzKWk+jnxwD2F8fAtjqawQY6cBAaF/BDkxFdZcvhIIp9veUNDnk98YYwL7ZjU
 8zRZQSmwI9zmC0kC9C6mmIN+eAbUhT+XDIlVk/USreujDkq9ESWIvo4SdY0+uXjJ
 EJ1Xhqx/H7Qzem+SdbonJjMIWa/5rBnqT/nvCwSGDx64OdvD+F93RHFeyJvp8p1J
 DWNNRZ4rAlrz3z8hDSuIt0M5ENoGWlHjD3nb11CBK/XnobBLhT+8W/b/ffjGcRnn
 dowofymjvGMnhUUkHIb5heyMZaRCZVquGlEOIjrOdc4GNm6EW5Y=
 =v+p3
 -----END PGP SIGNATURE-----

Merge tag 'mips-pull-2020-10-07' of https://gitlab.denx.de/u-boot/custodians/u-boot-mips

- mips: octeon: add support for DDR4 memory controller
- mips: octeon: add support for DWC3 USB
- mips: octeon: add support for booting Linux
2020-10-07 17:25:25 -04:00
Stefan Roese
1471560b2c mips: octeon: octeon_common.h: Increase CONFIG_SYS_BOOTM_LEN
Increase CONFIG_SYS_BOOTM_LEN to 64MiB for Linux kernel booting.

Signed-off-by: Stefan Roese <sr@denx.de>
2020-10-07 20:25:58 +02:00
Stefan Roese
63051d62b8 mips: octeon: octeon_ebb7304: Add DDR4 support
This patch adds the board specific configuration (struct) for the
Octeon 3 EBB7304 EVK. This struct is ported from the 2013er Cavium /
Marvell U-Boot repository. Also, the Octeon RAM driver is enabled in
the board defconfig for its usage.

Tested with one and two DIMMs on the EBB7304 EVK (8 & 16 GiB).

Signed-off-by: Stefan Roese <sr@denx.de>
2020-10-07 20:25:57 +02:00
Tom Rini
42378e3cd2 bloblist enhancement for alignment
Update ofnode/dev_read phandle function
 sandbox keyboard enhancements and fixes
 -----BEGIN PGP SIGNATURE-----
 
 iQHFBAABCAAvFiEE1//at7WoVCu4umzW8Cm2NFgI+6QFAl98qrQRHHNqZ0BjaHJv
 bWl1bS5vcmcACgkQ8Cm2NFgI+6Tm5QwAnofBrQ5Y2lwJCUnaratH/J0p5aDXMu37
 SMshRdY4cQPNT1nBFf0fA8UYwTScUla48tPfMO/IxnoMwizxNRZQOH56vcm6w6ie
 73uWlOAl7paw0UGpLYnkuwGC3CoCT7wynTMy0Ap4994alq2pcTK75ra9ODLPn/Sh
 Qg4R4I1VoWbTJT4ZFYcjdMg1+B2hDPd+gVLjjGmOwazncG7aMmpYKJOcscZCuqv8
 Utg30XUxWMxclVPuzXAfREjx+Hhy0AG44ZYv3T44JaOtIAHU4Va/rzqrJRe+pR9V
 YwgjCQhAOuGRswqNJDeg5K8o64jW3vAVULG1HrOZ3gu19ZCmseAH4bNHgiy2SBMz
 CtVtapU+uXjktME2G0vX86Ip8kpxi07p1WeP83TmDFqiGnfEZxn5WH7bYc4l7KSf
 mfWhmrrY5K2ogN5iN8ahc7fGBdHziD+h/Blwn03LgTFHF8f6jxVNJlvjYiya97HN
 1LPk4NNYgPQI3mObL5szQ8FKJ69zSCFk
 =ZqpG
 -----END PGP SIGNATURE-----

Merge tag 'dm-pull-6oct20' of git://git.denx.de/u-boot-dm

bloblist enhancement for alignment
Update ofnode/dev_read phandle function
sandbox keyboard enhancements and fixes
2020-10-06 13:59:01 -04:00
Patrick Delaunay
89f68302ca dm: add cells_count parameter in *_count_phandle_with_args
The cell_count argument is required when cells_name is NULL.

This patch adds this parameter in live tree API
- of_count_phandle_with_args
- ofnode_count_phandle_with_args
- dev_count_phandle_with_args

This parameter solves issue when these API is used to count
the number of element of a cell without cell name. This parameter
allow to force the size cell.

For example:
  count = dev_count_phandle_with_args(dev, "array", NULL, 3);

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2020-10-06 09:07:54 -06:00
Patrick Delaunay
6d9949fe86 dm: update test on of_offset in ofnode_valid
Update the test for node.of_offset because an invalid offset is not
always set to -1 because the return value of the libfdt functions are:
+ an error with a value < 0
+ a valid offset with value >=0

For example, in ofnode_get_by_phandle() function, we have:
node.of_offset = fdt_node_offset_by_phandle(gd->fdt_blob, phandle);
and this function can return -FDT_ERR_BADPHANDLE (-6).

Without this patch, the added test dm_test_ofnode_get_by_phandle failed.

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2020-10-06 09:07:54 -06:00
Stefan Roese
45dbe75da6 dm: ofnode: Fix compile breakage with OF_CHECKS enabled
Include missing log.h and change _ofnode_to_np() to ofnode_to_np() so
that compiling with OF_CHECKS enabled does not break.

Signed-off-by: Stefan Roese <sr@denx.de>
Cc: Simon Glass <sjg@chromium.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
2020-10-06 09:07:54 -06:00
Simon Glass
e9b6b2c77d bloblist: Fix up a few comments
Adjust a few comments to make the meaning clearer.

Signed-off-by: Simon Glass <sjg@chromium.org>
2020-10-06 09:07:54 -06:00
Simon Glass
4c1497e776 bloblist: Allow custom alignment for blobs
Some blobs need a larger alignment than the default. For example, ACPI
tables often start at a 4KB boundary. Add support for this.

Update the size of the test blob to allow these larger records.

Signed-off-by: Simon Glass <sjg@chromium.org>
2020-10-06 09:07:54 -06:00
Simon Glass
cdd4e30dfc bloblist: Compare addresses rather than pointers in tests
When running these tests on sandbox any failures result in very large or
long pointer values which are a pain to work with. Map them to an address
so it is easier to diagnose failures.

Signed-off-by: Simon Glass <sjg@chromium.org>
2020-10-06 09:07:54 -06:00
Simon Glass
4aed227623 bloblist: Add a command
It is helpful to be able to see basic statistics about the bloblist and
also to list its contents. Add a 'bloblist' command to handle this.

Put the display functions in the bloblist modules rather than in the
command code itself. That allows showing a list from SPL, where commands
are not available.

Also make bloblist_first/next_blob() static as they are not used outside
this file.

Signed-off-by: Simon Glass <sjg@chromium.org>
2020-10-06 09:07:54 -06:00
Tom Rini
5dcf7cc590 Pull request for UEFI sub-system for efi-2021-01-rc1
The following bugs in the UEFI system are resolved:
 
 * illegal free in EFI_LOAD_FILE2_PROTOCOL implementation
 * incorrect documentation of EFI_LOAD_FILE2_PROTOCOL implementation
 * output of CRC32 as decimal instead hexadecimal in unit test
 * use EfiReservedMemoryType for no-map reserved memory
 * avoid unnecessary resets in UEFI unit tests
 * call EFI bootmgr even without having /EFI/boot
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEEbcT5xx8ppvoGt20zxIHbvCwFGsQFAl98KaIACgkQxIHbvCwF
 GsSeEQ/9E8i1GyZp/rGcL6/Ui84z6ZBglUs73MfJkPJ+uI1WqY7pBVvoybciHBfX
 ZgAfoVLZnMmgZhPAN9kao9HtqmqeMqAjxYAKGBvjJTH+xhvAPgUA81+H0cLw7UBs
 XcNcchEinI6EMqGBlzrdRoLSrFyQT0ZdhEWeGoQ+clMPMZHjOqJ40DA+sUnDfdLP
 Ab0MxrfT7XZ4naufM2HiA9bD+qNnYMjpr/y3tX5Y4vcHYfka7Dk5/97ILcpXCwmr
 sBWEZISBuUHzWZydPW8nWm1P7SmT8YLfVORVetPC4Gv1ZOiNdF9s7bgPoab9lCMV
 sqQyoNgRDYBCvppr3xStCVbSQ+KkotyX2gHDpuG4Xq//n23QWo6qWKQc0iN5g943
 aaJTn7qw9KB4HESRZPgABY/cyJIziWupLGbKdf1DnoLPxvZaOF/NR8zHiO3rLd4t
 F4Rg3RHI8PkQf8Yv9GSwBGP2QVFQKIQbPjaFBsGiJm2KBEC+ZAaQ0W459Bnn/pwT
 fGqhlzpblbFLApIoH2EXDNHxRuI/My/Wr39uN7oX3f+dfhSDxO0mbzfXBlttZYNp
 LgF4NnPuAPAcNXZc/O6nG2IDDTv1NqKuK5bd9nUe5PIPV/9iS9XNulrdHqsZQS9H
 efJHphuJ0zSvRQF5jSvzuVsxe6zWff4i4xBJCeJcaIg9Toz/lkM=
 =laLr
 -----END PGP SIGNATURE-----

Merge tag 'efi-2021-01-rc1' of https://gitlab.denx.de/u-boot/custodians/u-boot-efi

Pull request for UEFI sub-system for efi-2021-01-rc1

The following bugs in the UEFI system are resolved:

* illegal free in EFI_LOAD_FILE2_PROTOCOL implementation
* incorrect documentation of EFI_LOAD_FILE2_PROTOCOL implementation
* output of CRC32 as decimal instead hexadecimal in unit test
* use EfiReservedMemoryType for no-map reserved memory
* avoid unnecessary resets in UEFI unit tests
* call EFI bootmgr even without having /EFI/boot
2020-10-06 08:36:38 -04:00
Tom Rini
987ab49366 - generate unique mac address from SoC serial on S400 board
- Add USB support for GXL and AXG SoCs
 - Update Gadget code to use the new GXL and AXG USB glue driver
 - Add a VIM3 board support to add dynamic PCIe enable in OS DT
 - Fix AXG pinmux with requesting GPIOs
 - Add missing GPIOA_18 for AXG pinctrl
 - Add Amlogic PWM driver
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEPVPGJshWBf4d9CyLd9zb2sjISdEFAl97ReAACgkQd9zb2sjI
 SdHHVA/9HuEAzwuJyJoyQcXARIqMwoi6w4qntlmb+VTnxxlKCzLL1Ir68W2+5Y5S
 l+sVkxYDwTmYRs40FOnMdFM1r1Q7IqWwTemqQAcfmGLV+/+MwoDiludGat7JAp1i
 mo/FBcBMLrf3dIJnhCyl2Rezgu06GLCQMAJOlusTDaruUZUHBxPVpAhfRvtlYq1Q
 bCINZfgMcmv8EfReIOE6xGt0+9TKILqQamMByc2ZWdz5UBioqUdQ82arW1rdV/ze
 ATU7vrxNmNlUQnRsMBOry9chbeuNrAhD8sqVloGPUikhf93y0BG7eINmCYrLoXjN
 mopApyWzo3+50GI6It+P9vX6mWVJhd8gAJsvTkRn8ok3flGlRQPmFmAfkjngN/GH
 wdkZpKi/u/ndm2Id7ekZff/Fm/ZmL/kskrRWaWrnuxHNiSNiJvAl+PU7MzCGrgED
 E0MduY1hFpa7wc47xFtI0WKlcdNVQCTRwuZYVIZYlnhXeVupJyQ0dx1ggonlvvIZ
 3cgS2qzd8z2RxKzhnRDvjSfwy7gWFjqpljocyRP4osoWJybJu88MIUFK2GlPdc7x
 3UD/+R88FsIVsQuxzbwBuFZnP+Zo1JqCmspyX4sCeUBDNK4+MqOqIxBZry+q4qso
 usWrTofg2hfxS3FgUL0pQW5GF8JGm4uXcIjbe7fMi47GJ6Lp/ec=
 =rbAX
 -----END PGP SIGNATURE-----

Merge tag 'u-boot-amlogic-20201005' of https://gitlab.denx.de/u-boot/custodians/u-boot-amlogic

- generate unique mac address from SoC serial on S400 board
- Add USB support for GXL and AXG SoCs
- Update Gadget code to use the new GXL and AXG USB glue driver
- Add a VIM3 board support to add dynamic PCIe enable in OS DT
- Fix AXG pinmux with requesting GPIOs
- Add missing GPIOA_18 for AXG pinctrl
- Add Amlogic PWM driver
2020-10-06 08:36:10 -04:00
Michael Walle
f3866909e3 distro_bootcmd: call EFI bootmgr even without having /EFI/boot
Currently, the EFI bootmgr is only called if there is a EFI binary
inside the path for removable media is found, i.e. /EFI/boot/. This
doesn't make sense. It is the duty of the bootmgr to find out the
path and name of the EFI binary to boot. It should be called even
if there is no /EFI/boot directory.

Thus, call the bootmgr before we try to boot the EFI binary inside
the removable media path.

Also remove the ${fdtcontroladdr} parameter because the fallback is
handled in cmd/bootefi.c and that already takes care of correct settings
if the board has ACPI and thus no device tree at all.

Signed-off-by: Michael Walle <michael@walle.cc>
Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-10-06 07:43:56 +02:00
Tom Rini
b7e7831e5d Merge branch 'next'
Bring in the assorted changes that have been staged in the 'next' branch
prior to release.

Signed-off-by: Tom Rini <trini@konsulko.com>
2020-10-05 14:10:59 -04:00
Neil Armstrong
1110e49e34 ARM: dts: sync amlogic G12A/SM1 DT from Linux 5.9-rc1
This imports the G12A & SM1 SoC and boards DT changes from the Linux
commit 9123e3a74ec7 ("Linux 5.9-rc1").

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Kevin Hilman <khilman@baylibre.com>
Tested-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2020-10-05 17:59:45 +02:00
Neil Armstrong
4e7b0a3f2a ARM: dts: sync amlogic AXG/GXL/GXM DT from Linux 5.8-rc1
This imports the AXG, GXL & GXM SoC and boards DT changes from the Linux
commit b3a9e3b9622a ("Linux 5.8-rc1").

This change also removes GXL & GXM u-boot.dtsi hacks for USB gadget.

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2020-10-05 17:59:45 +02:00
Tom Rini
caebff09ef First set of u-boot-atmel features for 2021.01 cycle
-----BEGIN PGP SIGNATURE-----
 
 iQFQBAABCgA6FiEEqxhEmNJ6d7ZdeFLIHrMeAg6sL8gFAl960JkcHGV1Z2VuLmhy
 aXN0ZXZAbWljcm9jaGlwLmNvbQAKCRAesx4CDqwvyDaWCACYjvloDzXQaYaauWwR
 whFwgkUAQ8yjadj/12We/X2b7HGisNFNE80e/V4MU8RrJDFZmohZdLWMfRKez29X
 d+BG+OzVXxHWozny7ZQ2g1yYJbgCI7sVUeemQjUBZJ6aKPneQlVfwyfT2l88wOVK
 yQMqS+ZyVogihR9/NHCOlJHog+6OOoBmc16w1tymM6QcO8ZsYeA66ed8SLnjDb3N
 Rg2Ll2RR/lHuD/Fpxt1aUhybXFKSIOr4Qopo5X0hw5B3ibkp6JXGRE2wIwQYw6CA
 q+sKTg37CSzylipkQ5EOGdLcXD7r3KIGkSbUMb8wvt6dROarnIuQ+zJeF3sr+l2H
 hSoU
 =vHqZ
 -----END PGP SIGNATURE-----

Merge tag 'u-boot-atmel-2021.01-a' of https://gitlab.denx.de/u-boot/custodians/u-boot-atmel into next

First set of u-boot-atmel features for 2021.01 cycle:

This feature set includes a new CPU driver for at91 family, new driver
for PIT64B hardware timer, support for new at91 family SoC named sama7g5
which adds: clock support, including conversion of the clock tree to
CCF; SoC support in mach-at91, pinctrl and mmc drivers update.  The
feature set also includes updates for mmc driver and some other minor
fixes and features regarding building without the old Atmel PIT and the
possibility to read a secondary MAC address from a second i2c EEPROM.
2020-10-05 10:54:27 -04:00
Soeren Moch
0f3e2942c9 board: tbs2910: Use recommended distroboot addresses
According to doc/README.distro fdt_addr must not be set when DTB is not
available from hardware. So remove this entry.

Use address 32MB above the start of DRAM for kernel_addr_r. This way
we likely can avoid the self-relocation of the compressed kernel image
before it decompresses to offset 0x8000 from start of DRAM.

Use address 128MB above the start of DRAM for fdt_addr_r, since this is
the maximum location for the end of the kernel. So we avoid overwriting
the DTB.

Use 512k above that for ramdisk_addr_r. This should be enough for the
DTB, rest of DRAM can be used for initrd.

Place boot script / extlinux.conf at offset 0 / 1MB from start of DRAM.
This space is available for processing in U-Boot.

Signed-off-by: Soeren Moch <smoch@web.de>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
2020-10-02 08:42:36 -04:00
Tom Rini
7e373a1a6a Merge branch 'next' of git://git.denx.de/u-boot-usb into next
- Assorted XHCI improvements
2020-10-01 14:52:56 -04:00
Chunfeng Yun
23a54ccfb6 usb: xhci: use macros with parameter to fill ep_info2
Use macros with parameter to fill ep_info2, then some macros
for MASK and SHIFT can be removed

Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2020-10-01 19:43:05 +02:00
Chunfeng Yun
bf58cf9ab1 usb: xhci: convert to TRB_TX_TYPE()
Use TRB_TX_TYPE() instead of (TRB_DATA_OUT/IN << TRB_TX_TYPE_SHIFT)

Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2020-10-01 19:43:05 +02:00
Chunfeng Yun
4312638eaf usb: xhci: convert to TRB_LEN() and TRB_INTR_TARGET()
For normal TRB fields:
use TRB_LEN(x) instead of ((x) & TRB_LEN_MASK);
and use TRB_INTR_TARGET(x) instead of
(((x) & TRB_INTR_TARGET_MASK) << TRB_INTR_TARGET_SHIFT)

Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2020-10-01 19:43:05 +02:00