Commit graph

28867 commits

Author SHA1 Message Date
Przemyslaw Marczak
973ae1e085 Odroid-XU3: enable the last dram bank and reserve 22MiB
This commit enables the last DRAM bank and reserves
the last 22 MiB of it, for the secure firmware.

Signed-off-by: Przemyslaw Marczak <p.marczak@samsung.com>
Cc: Akshay Saraswat <akshay.s@samsung.com>
Cc: Hyungwon Hwang <human.hwang@samsung.com>
Cc: Minkyu Kang <mk7.kang@samsung.com>
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2015-03-04 21:25:35 +09:00
Przemyslaw Marczak
a0643e227a board: samsung: reserve memory for the secure firmware
Since more than one board requires memory reservation
for the secure firmware, the reservation code can be
made in a common code.
Now, to reserve some part of the the last bank,
board config should define:
- CONFIG_TZSW_RESERVED_DRAM - len in bytes
- CONFIG_NR_DRAM_BANKS - number of memory banks

Signed-off-by: Przemyslaw Marczak <p.marczak@samsung.com>
Cc: Akshay Saraswat <akshay.s@samsung.com>
Cc: Hyungwon Hwang <human.hwang@samsung.com>
Cc: Minkyu Kang <mk7.kang@samsung.com>
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2015-03-04 21:25:35 +09:00
Łukasz Majewski
c8b71a3528 samsung: board: fix: Define loop iterator as an unsigned int to suppress gcc 4.8 warning
This patch suppress following warning:

board/samsung/common/board.c:95:32: warning: iteration 4u invokes undefined behavior [-Waggressive-loop-optimizations]
   addr = CONFIG_SYS_SDRAM_BASE + (i * SDRAM_BANK_SIZE);
                                ^
board/samsung/common/board.c:94:2: note: containing loop

about possible signed integer overflow at gcc 4.8.2 (odroid board)

Signed-off-by: Lukasz Majewski <l.majewski@samsung.com>
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2015-03-04 20:01:01 +09:00
Sinan Akman
19e5118d1c mpc837xerdb: "fix Calling __hwconfig without a buffer" warning
Signed-off-by: Sinan Akman <sinan@writeme.com>
2015-03-02 15:11:36 -05:00
Tom Rini
7547f78ce2 Merge branch 'xnext/zynqmp' of git://www.denx.de/git/u-boot-microblaze 2015-03-02 13:22:12 -05:00
Michal Simek
84c7204bd1 arm64: Add Xilinx ZynqMP support
Add basic Xilinx ZynqMP arm64 support.
Serial and SD is supported.
It supports emulation platfrom ep108 and QEMU.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
2015-03-02 18:41:54 +01:00
Andreas Bießmann
ed78b11ca4 atngwmkii: convert to generic board
Signed-off-by: Andreas Bießmann <andreas.devel@googlemail.com>
2015-03-02 08:49:48 -05:00
Masahiro Yamada
cc2b49c2ba kconfig: remove unneeded U-Boot extension code
This code was introduced to support the multiple .config
configuration in U-Boot.  We do not need it any more.

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
2015-03-02 08:48:14 -05:00
Axel Lin
20379c115e serial: ns16550: Fix build error due to a typo
Fix trivial typo.

Acked-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Axel Lin <axel.lin@ingics.com>
2015-03-02 08:48:00 -05:00
Tom Rini
4e34d61039 MAINTAINERS, git-mailrc: Update my email address
Signed-off-by: Tom Rini <trini@konsulko.com>
2015-03-02 08:37:50 -05:00
Tom Rini
301c128379 armv7.h: Add <asm/io.h>
With a389531 we now call readl() from this file so add <asm/io.h> so
that we have a prototype for the function.

Signed-off-by: Tom Rini <trini@konsulko.com>
2015-03-02 08:24:45 -05:00
Tom Rini
57c6941b43 Merge git://git.denx.de/u-boot-usb 2015-03-02 07:24:27 -05:00
Tom Rini
a1b341989b Merge git://git.denx.de/u-boot-pxa 2015-03-02 07:24:15 -05:00
Lukasz Majewski
c01c418717 MAINTAINERS: Add F: drivers/usb/gadget to DFU custodian responsibility
After discussion during the last u-boot mini summit with USB maintainer -
Marek Vasut - it has been decided, that gadget development should be
coordinated by DFU custodian.

Such patch formalizes current development status.

Signed-off-by: Lukasz Majewski <l.majewski@samsung.com>
2015-03-02 11:02:59 +01:00
Marcel Ziswiler
44ba7a373a pxa: colibri_pxa270: integrate latest validated register settings
Integrate latest validated register settings from Toradex WinCE BSP
4.2 working accross all module versions from early V1.x, V1.2D, V2.2B
to V2.4A.

Signed-off-by: Marcel Ziswiler <marcel@ziswiler.com>
2015-03-02 10:59:51 +01:00
Marcel Ziswiler
a36f11272e pxa: colibri_pxa270: remove CONFIG_ENV_ADDR_REDUND
Usually not required for NOR flash.

Signed-off-by: Marcel Ziswiler <marcel@ziswiler.com>
2015-03-02 10:59:51 +01:00
Marcel Ziswiler
fa752d64f9 pxa: colibri_pxa270: fix wrong comment about voipac ethernet chip
Signed-off-by: Marcel Ziswiler <marcel@ziswiler.com>
2015-03-02 10:59:51 +01:00
Marcel Ziswiler
99d672fa54 pxa: colibri_pax270: fix CONFIG_BOOTCOMMAND
While 'mmc init' is no longer required the address to bootm the kernel
from NOR flash was wrong.

Signed-off-by: Marcel Ziswiler <marcel@ziswiler.com>
2015-03-02 10:59:51 +01:00
Marcel Ziswiler
7c49b523e7 pxa: colibri_pxa270: avoid overwriting factory configuration block
Specify a CONFIG_BOARD_SIZE_LIMIT of 256 KB in order to avoid
overwriting the factory configuration block located at offset 0x40000
in NOR flash.

Signed-off-by: Marcel Ziswiler <marcel@ziswiler.com>
2015-03-02 10:59:51 +01:00
Marcel Ziswiler
fe488a8528 pxa: colibri_pxa270: disable loadb/s commands and long help
To save more than 20 KB of precious space in NOR flash get rid of the
following configuration options:

CONFIG_CMD_LOADB
CONFIG_CMD_LOADS
CONFIG_SYS_LONGHELP

Signed-off-by: Marcel Ziswiler <marcel@ziswiler.com>
2015-03-02 10:59:50 +01:00
Marcel Ziswiler
855596795e pxa: colibri_pxa270: migrate to generic board
Migrate Toradex Colibri PXA270 to use CONFIG_SYS_GENERIC_BOARD.

Signed-off-by: Marcel Ziswiler <marcel@ziswiler.com>

Reviewed-by: Simon Glass <sjg@chromium.org>
2015-03-02 10:59:50 +01:00
Marcel Ziswiler
50dea4626f pxa: balloon3/colibri_pxa270: fix environment optionally being nowhere
I couldn't quite figure out whether or not CONFIG_SYS_ENV_IS_NOWHERE
actually ever worked but nowadays this is called CONFIG_ENV_IS_NOWHERE.

Signed-off-by: Marcel Ziswiler <marcel@ziswiler.com>
2015-03-02 10:59:50 +01:00
Marcel Ziswiler
44d6db6fc4 pxa: balloon3: fix comment about sdram banks
Signed-off-by: Marcel Ziswiler <marcel@ziswiler.com>
2015-03-02 10:59:50 +01:00
Marcel Ziswiler
ac078fef8c pxa: balloon3: remove nowhere used symbol CONFIG_SYS_MEM_BUF_IMP
Signed-off-by: Marcel Ziswiler <marcel@ziswiler.com>
2015-03-02 10:59:50 +01:00
Marcel Ziswiler
e2b7032524 remove nowhere used symbol CONFIG_SYS_CLKS_IN_HZ
Basically finish what the following commit started a long time ago:

488f5d8790

Signed-off-by: Marcel Ziswiler <marcel@ziswiler.com>

For mx35pdk/woodburn:

Acked-by: Stefano Babic <sbabic@denx.de>
2015-03-02 10:59:50 +01:00
Marcel Ziswiler
1e49f6e2eb pxa: fix wrong comment about vpac270 being the arch number
Signed-off-by: Marcel Ziswiler <marcel@ziswiler.com>
2015-03-02 10:59:50 +01:00
Tom Rini
6fa361903c Merge branch 'master' of git://git.denx.de/u-boot-samsung 2015-03-01 22:05:54 -05:00
Tom Rini
1da7ce4155 Merge branch 'master' of git://git.denx.de/u-boot-uniphier 2015-03-01 21:07:53 -05:00
Tom Rini
fc83410095 Merge branch 'rmobile' of git://git.denx.de/u-boot-sh 2015-03-01 21:06:47 -05:00
Tom Rini
00956eb5f3 Merge branch 'master' of git://git.denx.de/u-boot-sh 2015-03-01 21:06:33 -05:00
Masahiro Yamada
105a9e705e ARM: UniPhier: remove SSC_WAY_SIZE and SSC_NUM_ENTRIES macros
Each way of the system cache has 256 entries for PH1-Pro4 and older
SoCs, whereas 512 entries for PH1-Pro5 and newer SoCs.  The line
size is still 128 byte.  Thus, the way size is 32KB/64KB for old/new
SoCs.

To keep lowlevel_init SoC-independent, set BOOT_RAM_SIZE to the
constant value 32KB.  It is large enough for temporary RAM and
should work for all the SoCs of UniPhier family.

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
2015-03-01 00:03:21 +09:00
Masahiro Yamada
b76fa3a34b ARM: UniPhier: remove stop_mpll() from PH1-Pro4 PLL initialization
This function was intended for MN2WS0235 (what we call PH1-Pro4TV).
On that SoC, MPLL is already running on the power-on reset and it
makes sense to stop the PLL at early boot-up.
On the other hand, PH1-Pro4(R) does not have SC_MPLLOSCCTL register,
so this function has no point.

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
2015-03-01 00:03:18 +09:00
Masahiro Yamada
6cc2120646 ARM: UniPhier: consolidate MEMCONF setting code
This code is duplicated in ph1-ld4/sg_init.c and ph1-pro4/sg_init.c.
Merge the same code into a new file, memconf.c.

The helper functions no longer have to be placed in the header file.
Also, move them into memconf.c.

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
2015-03-01 00:03:13 +09:00
Masahiro Yamada
afed8c1b6a ARM: UniPhier: switch to 1CS support card
The 3CS support card (CONFIG_DCC_MICRO_SUPPORT_CARD) used to be used
very often before, but it is recently getting a minority.  Swith to
the 1CS support card (CONFIG_PFC_MICRO_SUPPORT_CARD).

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
2015-03-01 00:03:08 +09:00
Masahiro Yamada
ea6de4ac80 ARM: UniPhier: support 1CS support card for all the UniPhier SoCs
Two support card variants are used with UniPhier reference boards:
 - 1 chip select support card (original CPLD)
 - 3 chip selects support card (ARIMA-compatible CPLD)

Currently, the former is only supported on PH1-Pro4, but it can be
expanded to PH1-LD4, PH1-sLD8 with a little code change.

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
2015-03-01 00:03:06 +09:00
Masahiro Yamada
53c45d4e1e ARM: UniPhier: switch to xHCI for PH1-Pro4
PH1-Pro4 includes both EHCI and xHCI IP cores.
Unfortunately, U-Boot cannot enable EHCI and xHCI support
simultaneously.  Some users may wish Super-Speed connection.
Disable CONFIG_USB_EHCI_HCD and enable CONFIG_USB_XHCI_HCD.

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
2015-03-01 00:03:03 +09:00
Masahiro Yamada
1e7df7c4e4 usb: UniPhier: add UniPhier on-chip xHCI host driver support
Support xHCI host driver used on Panasonic UniPhier platform.

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Acked-by: Marek Vasut <marex@denx.de>
2015-03-01 00:03:00 +09:00
Masahiro Yamada
de01a768f0 ARM: UniPhier: add xHCI device nodes to PH1-Pro4 device tree
Each USB port corresponds to the following IP core:
 port0: xHCI (0x65a00000) SS+HS
 port1: xHCI (0x65c00000) HS (SS PHY is not implemented)
 port2: EHCI (0x5a800100) HS
 port3: EHCI (0x5a810100) HS

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
2015-03-01 00:02:58 +09:00
Masahiro Yamada
1535163a4e ARM: UniPhier: enable xHCI and GIO cores for PH1-Pro4
This is necessary to use the USB 3.0 host controllers on PH1-Pro4.

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
2015-03-01 00:02:55 +09:00
Masahiro Yamada
bdcf5a4c14 ARM: UniPhier: add I/O pin settings for xHCI on PH1-Pro4
This is necessary to use the xHCI cores for PH1-Pro4.

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
2015-03-01 00:02:54 +09:00
Masahiro Yamada
64d851bf1d ARM: UniPhier: replace "usb-ehci" with "generic-ehci"
EHCI host controllers have a common register interface.
We may wish to implement a generic EHCI driver someday.

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
2015-03-01 00:02:51 +09:00
Masahiro Yamada
4c7d025368 ARM: UniPhier: move uniphier_ehci_reset() function
Because uniphier_ehci_reset() is only called from ehci-uniphier.c,
it can be a static function there.

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Acked-by: Marek Vasut <marex@denx.de>
2015-03-01 00:02:49 +09:00
Masahiro Yamada
44f597adeb ARM: UniPhier: remove EHCI platform devices
Now UniPhier platform highly depends on Device Tree configuration
(CONFIG_OF_CONTROL is select'ed by Kconfig).  Since the EHCI is only
used on main U-Boot, we can drop platform devices of the EHCI
controllers.  We still keep UART platform devices because they might
be useful for SPL.

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Acked-by: Marek Vasut <marex@denx.de>
2015-03-01 00:02:48 +09:00
Masahiro Yamada
42ca6982ff ARM: UniPhier: enable STDMAC for EHCI
Deassert the reset signal and provide the clock for STDMAC core.
This is necessary for the USB 2.0 host controllers.

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
2015-03-01 00:02:45 +09:00
Masahiro Yamada
d3384bf77e ARM: UniPhier: reset NAND core in SPL for non-NAND boot mode
For all the UniPhier SoCs so far, the reset signal of the NAND core
is automatically deasserted after the PLL gets stabled.
(The bit 2 of SC_RSTCTRL is default to one.)

This causes a fatal problem on the NAND controller of PH1-LD4.
For that SoC, the NAND I/O pins are not set up yet at the power-on
reset except the NAND boot mode.  As a result, the NAND controller
begins automatic device scanning with wrong I/O pins and finally
hangs up.

Actually, U-Boot dies after printing "NAND:" on the console unless
the boot mode latch detected the NAND boot mode.

To work around this problem, reset the NAND core in SPL for non-NAND
boot modes.  If CONFIG_NAND_DENALI is enabled, the reset signal is
deasserted again in U-Boot proper.  At this time, I/O pins have been
correctly set up, the device scanning should succeed.

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
2015-03-01 00:02:40 +09:00
Masahiro Yamada
198a97a6ab ARM: UniPhier: split clkrst_init() into two functions
Split the current clkrst_init() into two functions:

 - early_clkrst_init(): called from SPL
  Deassert the reset signals of the memory controller and some other
  basic cores.

 - clkrst_init(): called from main U-boot
  Deassert the reset signals that are necessary for the access to
  peripherals etc.

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
2015-03-01 00:02:36 +09:00
Masahiro Yamada
f267b81e20 ARM: UniPhier: rename SC_CLKCTRL_CLK_* to SC_SCLKCTRL_CEN_*
Follow the register macros in the LSI specification book.

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
2015-03-01 00:02:32 +09:00
Masahiro Yamada
27eac5df17 ARM: UniPhier: fix SBC init code
Now UniPhier SoCs only work with CONFIG_SPL and the function
sbc_init() is called from SPL.
The conditional #if !defined(CONFIG_SPL_BUILD) has no point
any more.

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
2015-03-01 00:02:29 +09:00
Masahiro Yamada
1a745d27bd ARM: UniPhier: fix comments in PH1-Pro4 SBC code
Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
2015-03-01 00:02:27 +09:00
Masahiro Yamada
099cf77c15 serial: UniPhier: move LCR register setting to probe function
We do not have to set the LCR register every time we change the
baud-rate.  We just need to set it up once in the probe function.

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
2015-03-01 00:02:26 +09:00