Commit graph

18140 commits

Author SHA1 Message Date
Nava kishore Manne
21620990cf arm64: zynqmp: Sync zynqmp fpga manager with mainline
Sync zynqmp fpga manager with mainline.

Signed-off-by: Nava kishore Manne <nava.manne@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-04-06 12:51:31 +02:00
Michal Simek
39419c21bf arm64: zynqmp: Remove unused zynqmp-clk.dtsi
All boards have been converted to firmware based driver that's why we can
remove this file now.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-04-06 12:51:31 +02:00
Michal Simek
d4fb2d1145 ARM: zynq: Fix spi name node
None name address should be aligned with address. DTC 1.5.1 is reporting
issues related to that.

arch/arm/boot/dts/zynq-zc770-xm010.dts:106.10-119.4: Warning
 (spi_bus_reg): /amba/spi@e0007000/flash@0: SPI bus unit address format
 error, expected "1"
arch/arm/boot/dts/zynq-zc770-xm013.dts:101.19-109.4: Warning
(spi_bus_reg): /amba/spi@e0006000/eeprom@0: SPI bus unit address format
 error, expected "2"

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-04-06 12:51:31 +02:00
Michal Simek
d31f1c9236 arm64: zynqmp: Update Copyright years to 2020
Trivial change.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-04-06 12:51:31 +02:00
Michal Simek
f695e1c889 arm64: zynqmp: Replace gpio-key,wakeup with wakeup source
The same change has been done for Zynq by commit 1241c72b6db1
("ARM: dts: zynq: replace gpio-key,wakeup with wakeup-source property")
in mainline Linux kernel.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-04-06 12:51:31 +02:00
Sudeep Holla
6bbe3e6c16 ARM: dts: zynq: replace gpio-key,wakeup with wakeup-source property
Most of the legacy "gpio-key,wakeup" boolean property is already
replaced with "wakeup-source". However few occurrences of old property
has popped up again, probably from the remnants in downstream trees.

Replace the legacy properties with the unified "wakeup-source"
property introduced in the Linux kernel commit 700a38b27eef
("Input: gpio_keys - switch to using generic device properties")

Cc: Michal Simek <michal.simek@xilinx.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-04-06 12:51:30 +02:00
Quanyang Wang
0b792fd4f1 ARM: dts: zc702: Fix I2C bus warnings
The dtc has new checks for I2C and SPI buses.
Fix the warnings in node names and unit-addresses.

Warning from Linux kernel:
arch/arm/boot/dts/zynq-zc702.dts:187.13-190.6: Warning (i2c_bus_reg): /amba/i2c@e0004000/i2c-mux@74/i2c@7/hwmon@52: I2C bus unit address format error, expected "34"
arch/arm/boot/dts/zynq-zc702.dts:191.13-194.6: Warning (i2c_bus_reg): /amba/i2c@e0004000/i2c-mux@74/i2c@7/hwmon@53: I2C bus unit address format error, expected "35"
arch/arm/boot/dts/zynq-zc702.dts:195.13-198.6: Warning (i2c_bus_reg): /amba/i2c@e0004000/i2c-mux@74/i2c@7/hwmon@54: I2C bus unit address format error, expected "36"

Signed-off-by: Quanyang Wang <quanyang.wang@windriver.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-04-06 12:51:30 +02:00
Michal Simek
c514301337 arm64: zynqmp: Print multiboot register value in EL3
Multi boot register can be used for using different boot images and design
better boot strategy. Let EL3 SPL or U-Boot to read it and print it.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-04-06 12:51:30 +02:00
Jerome Brunet
e13e7c9dae arm64: dts: meson: add libretech-pc support
Add support for the Amlogic based libretech-pc platform.
This platform comes with 2 variant, based on the s905d or s912 SoC.

Acked-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
[narmstrong: update board/amlogic/q200/MAINTAINERS]
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2020-04-06 09:56:35 +02:00
Jerome Brunet
74f50b79e3 arm64: dts: meson: import libretech-pc from linux v5.6-rc2
Sync the libretech-pc device tree from Linux v5.6-rc2
11a48a5a18c6 ("Linux 5.6-rc2")

Acked-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2020-04-06 09:56:35 +02:00
Jerome Brunet
dd5f2351e9 arm64: dts: meson: sync dt and bindings from v5.6-rc2
Sync the device tree and dt-bindings from Linux v5.6-rc2
11a48a5a18c6 ("Linux 5.6-rc2")

The only exception to this is the mmc pinctrl pin bias of gxl SoC family.
This is a fix which found its way to u-boot but not Linux yet.

Acked-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2020-04-06 09:56:35 +02:00
Marek Vasut
a667cd8dd3 ARM: dts: stm32: Temporarily drop cd-gpios from AV96 DT
The card-detect GPIO and any other GPIO access currently doesn't work in
U-Boot SPL on any STM32 platform and crashes the SPL. To work around this
problem on AV96 right before release, remove the cd-gpios from DT. This
patch must be reverted right after release, once the proper fix for the
GPIO driver, "gpio: stm32: support gpio ops in SPL", is applied.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Cc: Patrick Delaunay <patrick.delaunay@st.com>
Cc: Patrice Chotard <patrice.chotard@st.com>
Cc: Tom Rini <trini@konsulko.com>
Acked-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
2020-04-05 19:07:13 -04:00
Tom Rini
a7b86eb524 Merge https://gitlab.denx.de/u-boot/custodians/u-boot-x86
- verdin-imx8mm board reST documentation update
- Intel Edison board ACPI table I2C/USB minor updates
- Fix a regression of ns16550 serial driver that breaks Intel Edison
2020-04-04 19:20:26 -04:00
Andy Shevchenko
4d073fa83b x86: acpi: Describe USB 3 host controller found on Intel Tangier
USB 3 host controller may be described in ACPI to allow users alter
the properties or other features. Describe it for Intel Tangier SoC.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2020-04-04 22:08:44 +08:00
Andy Shevchenko
d0f7ab5310 x86: acpi: Add I²C timings to Intel Merrifield platform
There is established way to provide I²C timings, or actually counters,
to the OS via ACPI. Fill them for Intel Merrifield platform.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2020-04-04 22:08:44 +08:00
Andy Shevchenko
ddcccb2b2c x86: acpi: Refactor XSDT handling in acpi_add_table()
There is no need to have an assignment to NULL for XSDT pointer.
Therefore, no need to assign it when rsdt_address is not set.
Because of above changes we may decrease indentation level as well.

While here, drop unnecessary parentheses.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2020-04-04 22:08:44 +08:00
Tom Rini
60f1cc529c Merge branch 'master' of https://gitlab.denx.de/u-boot/custodians/u-boot-tegra
- Add support for Jetson Nano, plus miscellaneous other fixes found
  during Nano bringup.
- Add Igor's update_uboot wrapper patches.
2020-04-03 16:05:46 -04:00
Michal Simek
e14ba8a577 arch: Add explicit linker script for u-boot-elf
Commit f4dc714aaa ("arm64: Turn u-boot.bin back into an ELF file after
relocate-rela")
introduce REMAKE_ELF option to recreate u-boot.elf from u-boot ->
u-boot.bin + DT -> u-boot.elf.

The best is to ilustrate it from make V=1 output
  cat u-boot-nodtb.bin dts/dt.dtb > u-boot-dtb.bin
  cp u-boot-dtb.bin u-boot.bin
aarch64-linux-gnu-objcopy -I binary -B aarch64 -O elf64-littleaarch64  u-boot.bin u-boot-elf.o
  aarch64-linux-gnu-ld.bfd u-boot-elf.o -o u-boot.elf --defsym="_start"=0x8000000 -Ttext=0x8000000

Last command has no explicit linker script passed that's why toolchain
internal linker script is used.
In Binutils 2.32 case it contains SIZEOF_HEADERS symbol which has changed
behavior by commit
https://sourceware.org/git/?p=binutils-gdb.git;a=commit;h=64029e93683a266c38d19789e780f3748bd6a188
which result in situation that program headers has changed from
(xilinx_zynqmp_mini_defconfig)

Program Headers:
  Type           Offset             VirtAddr           PhysAddr
                 FileSiz            MemSiz              Flags  Align
  LOAD           0x0000000000010000 0x00000000fffc0000 0x00000000fffc0000
                 0x0000000000018918 0x0000000000018918  RW     0x10000

to

Program Headers:
  Type           Offset             VirtAddr           PhysAddr
                 FileSiz            MemSiz              Flags  Align
  LOAD           0x0000000000000000 0x00000000fffb0000 0x00000000fffb0000
                 0x0000000000028918 0x0000000000028918  RW     0x10000

Xilinx tools like XSDB or Bootgen are using program headers for loading ELF
to the right location and by above binutils change ELF is loaded to
incorrect location.

The patch is explicitly use u-boot-elf.lds (just cat now) for u-boot.elf
recreation which is called when REMAKE_ELF is setup.
By purpose u-boot-elf.lds doesn't contain OUTPUT_FORMAT/OUTPUT_ARCH to be
able to use by all archs.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
Tested-By: Álvaro Fernández Rojas <noltari@gmail.com>
2020-04-03 11:52:55 -04:00
Jan-Christoph Tebbe
740370282e mach-snapdragon: Fix overwriting last digit of serial number
When generating the MAC address based on the boards serial number
the last digit was overwritten with the null termination. That way
boards with serial numbers close to each other would use the same
MAC address.

Signed-off-by: Jan-Christoph Tebbe <Jan-Christoph.Tebbe@ithinx.io>
2020-04-03 11:47:47 -04:00
Tom Warren
7c02bc9649 ARM: tegra: Add NVIDIA Jetson Nano Developer Kit support
The Jetson Nano Developer Kit is a Tegra X1-based development board. It
is similar to Jetson TX1 but it is not pin compatible. It features 4GB
of LPDDR4, a SPI NOR flash for early boot firmware and an SD card slot
used for storage.

HDMI 2.0 or DP 1.2 are available for display, four USB ports (3 USB 2.0
and 1 USB 3.0) can be used to attach a variety of peripherals and a PCI
Ethernet controller provides onboard network connectivity. NVMe support
has also been added. Env save is at the end of QSPI (4MB-8K).

A 40-pin header on the board can be used to extend the capabilities and
exposed interfaces of the Jetson Nano.

Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Tom Warren <twarren@nvidia.com>
Tested-by: Peter Robinson <pbrobinson@gmail.com>
2020-04-02 14:30:02 -07:00
Tom Warren
a482f32992 mmc: t210: Fix 'bad' SD-card clock when doing 400KHz card detect
According to the HW team, for some reason the normal clock select code
picks what appears to be a perfectly valid 375KHz SD card clock, based
on the CAR clock source and SDMMC1 controller register settings (CAR =
408MHz PLLP0 divided by 68 for 6MHz, then a SD Clock Control register
divisor of 16 = 375KHz). But the resulting SD card clock, as measured by
the HW team, is 700KHz, which is out-of-spec. So the WAR is to use the
values given in the TRM PLLP table to generate a 400KHz SD-clock (CAR
clock of 24.7MHz, SD Clock Control divisor of 62) only for SDMMC1 on
T210 when the requested clock is <= 400KHz. Note that as far as I can
tell, the other requests for clocks in the Tegra MMC driver result in
valid SD clocks.

Signed-off-by: Tom Warren <twarren@nvidia.com>
Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
2020-04-02 14:30:01 -07:00
Tom Warren
5e965e8140 mmc: t210: Add autocal and tap/trim updates for SDMMC1/3
As per the T210 TRM, when running at 3.3v, the SDMMC1 tap/trim and
autocal values need to be set to condition the signals correctly before
talking to the SD-card. This is the same as what's being done in CBoot,
but it gets reset when the SDMMC1 HW is soft-reset during SD driver
init, so needs to be repeated here. Also set autocal and tap/trim for
SDMMC3, although no T210 boards use it for SD-card at this time.

Signed-off-by: Tom Warren <twarren@nvidia.com>
Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
2020-04-02 14:30:01 -07:00
Tom Warren
d43c1dc2e8 i2c: t210: Add VI_I2C clock source support
Fix VI_I2C clock source type. Will be needed by VI_I2C driver.
Also added use of INTERNAL_ID macro in two places, needed to keep
the id returned to 8 bits.

Signed-off-by: Tom Warren <twarren@nvidia.com>
2020-04-02 14:30:01 -07:00
Tom Warren
48ba1969c1 t210: pinmux: Remove pinmux/GPIO init from T210 boards
T210 CBoot is now doing the full pinmux and GPIO init, based on the DTB
tables. Remove pinmux/GPIO init tables & code from all T210-based builds
below:

p2371-2180 aka TX1
p2371-0000
e2220-1170
p2571

Signed-off-by: Tom Warren <twarren@nvidia.com>
Acked-by: Stephen Warren <swarren@nvidia.com>
2020-04-02 14:30:01 -07:00
JC Kuo
d491dc09e4 t210: do not enable PLLE and UPHY PLL HW PWRSEQ
This commit removes the programming sequence that enables PLLE and UPHY
PLL hardware power sequencers. Per TRM, boot software should enable PLLE
and UPHY PLLs in software controlled power-on state and should power
down PLL before jumping into kernel or the next stage boot software.

Adds call to board_cleanup_before_linux to facilitate this.

Signed-off-by: JC Kuo <jckuo@nvidia.com>
Signed-off-by: Tom Warren <twarren@nvidia.com>
Acked-by: Stephen Warren <swarren@nvidia.com>
2020-04-02 14:30:01 -07:00
Stephen Warren
9eb15cbe5c ARM: tegra: p2371-2180: add I2C nodes to DT
This adds to the DT the I2C controllers that connect to the board ID EEPROM,
etc. With this change, you can now probe all I2C devices on a TX1 board.

Signed-off-by: Tom Warren <twarren@nvidia.com>
Acked-by: Stephen Warren <swarren@nvidia.com>
2020-04-02 14:30:01 -07:00
Jagan Teki
61853a7ac7 rockchip: Enable pre console for rk3399
Enable pre console buffer for rk3399 platform.

This would help to capture the console messages prior to
the console being initialised. Enabling this would help
to capture all the console messages on video output source
like HDMI. So we can find the full console messages of
U-Boot proper on HDMI display when enabled it for RK3399
platform boards.

Buffer address used for pre console is 0x0f200000 which is
ram base plus 240MiB. right now the Allwinner SoC is using
similar computation.

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
Tested-by: Peter Robinson <pbrobinson@gmail.com>
2020-04-02 15:49:16 +02:00
Jagan Teki
e67243f1a3 video: rockchip: Fix vop modes for rk3399
VOP display endpoint pipeline configuration differs
between rk3288 vs rk3399.

These VOP pipeline configuration depends on how the
different display interfaces connected in sequence to
IN and OUT ports like for,

RK3288:

vopb_out: port {
	#address-cells = <1>;
	#size-cells = <0>;
	vopb_out_edp: endpoint@0 {
		reg = <0>;
		remote-endpoint = <&edp_in_vopb>;
	};
	vopb_out_hdmi: endpoint@1 {
		reg = <1>;
                remote-endpoint = <&hdmi_in_vopb>;
        };
        vopb_out_lvds: endpoint@2 {
                reg = <2>;
                remote-endpoint = <&lvds_in_vopb>;
        };
        vopb_out_mipi: endpoint@3 {
                reg = <3>;
                remote-endpoint = <&mipi_in_vopb>;
        };
};

RK3399:

vopb_out: port {
         #address-cells = <1>;
         #size-cells = <0>;
         vopb_out_edp: endpoint@0 {
                reg = <0>;
                remote-endpoint = <&edp_in_vopb>;
         };
         vopb_out_mipi: endpoint@1 {
                reg = <1>;
                remote-endpoint = <&mipi_in_vopb>;
         };
         vopb_out_hdmi: endpoint@2 {
                reg = <2>;
                remote-endpoint = <&hdmi_in_vopb>;
         };
         vopb_out_mipi1: endpoint@3 {
                reg = <3>;
                remote-endpoint = <&mipi1_in_vopb>;
         };
         vopb_out_dp: endpoint@4 {
                reg = <4>;
                remote-endpoint = <&dp_in_vopb>;
         };
};

here, HDMI interface has endpoint 1 in rk3288 and 2 in rk3399.

The rockchip vop driver often depends on this determined endpoint
number and stored in vop_mode. So based on this vop_mode the bpp
and pin polarity would configure on detected display interface.

Since, the existing driver using rk3288 vop mode settings enabling
the same will result wrong display interface configuration for rk3399.

Add the patch for fixing these vop modes for rk3399.

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
Tested-by: Peter Robinson <pbrobinson@gmail.com>
2020-04-02 15:47:35 +02:00
Tom Rini
e88c9e6ff1 - Fix device tree of Avenger96 board from Arrow Electronics and add
compatibility with stm32mp15_dhcom_basic_defconfig
 -----BEGIN PGP SIGNATURE-----
 
 iQEzBAABCgAdFiEE56Yx6b9SnloYCWtD4rK92eCqk3UFAl6EiK0ACgkQ4rK92eCq
 k3V6DggAhU7jE5MGs9A7En+YpANXbJ4tl56IZIjdzPzEjA2G3yuBv/DLci/w27aF
 eaP83ayI/ZrVtevEBFomP0JRrzQc9r/ot+USVugGsoAigLbzJc5uba42FGn09Olh
 uKkst0Fb7uPRzZQNwRc7hTKVSLvT11c0oPQyhhJM2djPDTETDry+RPnEFQ41SEUt
 bNILmj0VRzikzbe5RXFWWYMUWBrt22pG2LLhog+WSRSpqrWM2zES64NnwAXxD/mR
 YIQFZIZ6eWW2Otp+qzenkg5ZWIMVWRyUBAP5e0auKRE8TGWAXgBcoFRTRLf7oA/P
 yr3TTBMWiPdqdXNe3MYzAiTpm7jrtg==
 =RALH
 -----END PGP SIGNATURE-----

Merge tag 'u-boot-stm32-20200401' of https://gitlab.denx.de/u-boot/custodians/u-boot-stm

- Fix device tree of Avenger96 board from Arrow Electronics and add
  compatibility with stm32mp15_dhcom_basic_defconfig
2020-04-01 09:47:30 -04:00
Marek Vasut
2f3c4b8a0f ARM: dts: stm32: Repair PMIC configuration on AV96
The core and vdd PMIC buck regulators were misconfigured, which caused
instability of the board and malfunction of high-speed interfaces, like
the RGMII. Configure the PMIC correctly to repair these problems. Also,
model the missing Enpirion EP53A8LQI on the DHCOR SoM as a fixed regulator.

Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Cc: Patrick Delaunay <patrick.delaunay@st.com>
Cc: Patrice Chotard <patrice.chotard@st.com>
2020-04-01 11:58:00 +02:00
Marek Vasut
4c8e4c6152 ARM: dts: stm32: Add missing ethernet PHY reset on AV96
Add PHY reset GPIO on AV96 ethernet PHY.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Cc: Patrick Delaunay <patrick.delaunay@st.com>
Cc: Patrice Chotard <patrice.chotard@st.com>
2020-04-01 11:58:00 +02:00
Marek Vasut
6bb45d08cb ARM: dts: stm32: Repair ethernet operation on AV96
The AV96 RGMII uses different pinmux for ETH_RGMII_TXD0, ETH_RGMII_RXD2
and ETH_RGMII_TX_CTL. Use the correct pinmux to make ethernet operational.

Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
Reviewed-by: Patrick Delaunay <patrick.delaunay@st.com>
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Cc: Patrick Delaunay <patrick.delaunay@st.com>
Cc: Patrice Chotard <patrice.chotard@st.com>
2020-04-01 11:58:00 +02:00
Marek Vasut
955de51111 ARM: dts: stm32: Add alternate pinmux for ethernet RGMII
Add another mux option for DWMAC RGMII, this is used on AV96 board.

Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
Reviewed-by: Patrick Delaunay <patrick.delaunay@st.com>
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Cc: Patrick Delaunay <patrick.delaunay@st.com>
Cc: Patrice Chotard <patrice.chotard@st.com>
2020-04-01 11:58:00 +02:00
Marek Vasut
e182dcaa1b ARM: dts: stm32: Add configuration EEPROM on AV96
The board has an EEPROM on the same I2C bus as PMIC, at address 0x53.
The EEPROM contains the board MAC address.

Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
Reviewed-by: Patrick Delaunay <patrick.delaunay@st.com>
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Cc: Patrick Delaunay <patrick.delaunay@st.com>
Cc: Patrice Chotard <patrice.chotard@st.com>
Change-Id: I340a0675c11e4599968b2e3ef0515fb8da8d7b42
2020-04-01 11:58:00 +02:00
Marek Vasut
f19312e5f4 ARM: dts: stm32: Use DT alias for the configuration EEPROM
Use DT /aliases node to establish a stable phandle to the configuration
EEPROM. This permits the configuration EEPROM to be moved e.g. to a
different address or a different bus. Adjust the board code to handle
new phandle lookup.

Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
Reviewed-by: Patrick Delaunay <patrick.delaunay@st.com>
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Cc: Patrick Delaunay <patrick.delaunay@st.com>
Cc: Patrice Chotard <patrice.chotard@st.com>
2020-04-01 11:58:00 +02:00
Marek Vasut
2f0b5d930d ARM: dts: stm32: Add QSPI NOR on AV96
The DH Electronics DHCOR SOM has QSPI NOR on the SoM itself, add it
into the DT.

Signed-off-by: Marek Vasut <marex@denx.de>
Reviewed-by: Patrick Delaunay <patrick.delaunay@st.com>
Cc: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Cc: Patrick Delaunay <patrick.delaunay@st.com>
Cc: Patrice Chotard <patrice.chotard@st.com>
Change-Id: Ia7c454c496f50e3fc4851ec1154f3641c416e98e
2020-04-01 11:57:31 +02:00
Marek Vasut
df7f49ca27 ARM: dts: stm32: Repair SDMMC2 operation
The eMMC uses different pinmux for the top four data lines, use such
a pinmux, otherwise it takes a very long time until the test for 8bit
operation times out. And this is the correct pinmux per schematic too.

Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
Reviewed-by: Patrick Delaunay <patrick.delaunay@st.com>
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Cc: Patrick Delaunay <patrick.delaunay@st.com>
Cc: Patrice Chotard <patrice.chotard@st.com>
2020-04-01 10:12:44 +02:00
Marek Vasut
5fdcba6402 ARM: dts: stm32: Add alternate pinmux for SDMMC2 pins 4-7
Add another mux option for SDMMC2 pins 4..7, this is used on AV96 board.

Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
Reviewed-by: Patrick Delaunay <patrick.delaunay@st.com>
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Cc: Patrick Delaunay <patrick.delaunay@st.com>
Cc: Patrice Chotard <patrice.chotard@st.com>
2020-04-01 10:12:44 +02:00
Marek Vasut
45fa59b407 ARM: dts: stm32: Repair SDMMC1 operation on AV96
The SD uses different pinmux for the D123DIRline, use such a pinmux,
otherwise there is a pinmux collision on the AV96. Add missing SD
voltage regulator switch and enable SDR104 operation.

Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
Reviewed-by: Patrick Delaunay <patrick.delaunay@st.com>
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Cc: Patrick Delaunay <patrick.delaunay@st.com>
Cc: Patrice Chotard <patrice.chotard@st.com>
2020-04-01 10:12:44 +02:00
Marek Vasut
4fdbe6487d ARM: dts: stm32: Add alternate pinmux for SDMMC1 direction pins
Add another mux option for SDMMC1 direction pins, in particular
SDMMC1_D123DIR, this is used on AV96 board.

Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
Reviewed-by: Patrick Delaunay <patrick.delaunay@st.com>
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Cc: Patrick Delaunay <patrick.delaunay@st.com>
Cc: Patrice Chotard <patrice.chotard@st.com>
2020-04-01 10:12:44 +02:00
Marek Vasut
81169ca3cc ARM: dts: stm32: Repair SD1 pre-reloc pinmux DT node on AV96
The sdmmc1_dir_pins_a: sdmmc1-dir-0 layout changed in commit 35a54d41d9
("ARM: dts: stm32mp1: sync device tree with v5.2-rc4") such that pins{};
became pins1{};pins2{};, however the SPL extras were not updated to reflect
that change. Fix this.

This fixes booting from SD1 X9 slot on the AV96 board.

Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
Reviewed-by: Patrick Delaunay <patrick.delaunay@st.com>
Fixes: 35a54d41d9 ("ARM: dts: stm32mp1: sync device tree with v5.2-rc4")
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Cc: Patrick Delaunay <patrick.delaunay@st.com>
Cc: Patrice Chotard <patrice.chotard@st.com>
2020-04-01 10:12:44 +02:00
Tom Rini
2b18b89156 Merge branch 'next' of git://git.denx.de/u-boot-usb into next 2020-03-31 17:24:19 -04:00
Tom Rini
7dbafe0634 Merge tag 'arc-last-minute-fixes-for-2020.04' of https://gitlab.denx.de/u-boot/custodians/u-boot-arc
This last minute pull-request is intended to fix some drivers
when used on ARC boards. The problem was introduced by
07906b3dad

What happened while doing one pretty simple improvement to make
U-Boot port more flexible and portable (by switching accessors from
assembly-written to plain C version) we implicitly added 2 problems:

 1. Downgraded accessors from being volatile which signalled to
    the compiler that it's now possible to do all kinds of optimizations
    which may easily include merge of subsequent byte reads/writes into
    word operations. Which is OK for accessing mormal memory but
    breaks operation of peripherals if we access its memory-mapped regs
    in such a "creative" manner.
 2. As a part of assembly-written implementation we had compiler barriers
    in form of the following construction 'asm volatile("" : : : "memory")',
    and we dropped it in C implemntation. This in its turn enabled compiler
    to mess with instruction ordering. Guess what it gives us in the end :)

So with all that we had in some corner-cases veeery funny instruction flows
generated. And in particular it broke DW SPI functionality when we were
writing large amount of data. Funny enough our tests which were writing
small amount of data still worked and only by the chance we caught that
breakage and unrolled that quite interesting loop of unexpected
problems.

The road to hell is paved with good intentions. Amen :)
2020-03-31 15:10:54 -04:00
Eugeniy Paltsev
45bd649511 ARC: IO: add MB for __raw_* memory accessors
We add memory barriers for __raw_readX / __raw_writeX accessors same
way as it is done for readX and writeX accessors as lots of U-boot
driver uses __raw_readX / __raw_writeX instead of proper accessor
with barrier.

It will save us from lot's of debugging in the future and it is OK
as U-Boot is not that performance oriented as real run-time
software like OS or user bare-metal app so we may afford being not
super fast as we only being executed once.

Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
2020-03-31 18:31:53 +03:00
Eugeniy Paltsev
e9a23c98c9 ARC: IO: add compiler barriers to IO accessors
We must use compiler barriers in C-version read/write IO accessors
before and after operation (read or write) so it won't be reordered
by compiler.

Fixes commit 07906b3dad ("ARC: Switch to generic accessors")

Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
2020-03-31 18:31:53 +03:00
Eugeniy Paltsev
7e57022823 ARC: IO: add volatile to accessors
We must use 'volatile' in C-version read/write IO accessors
implementation to avoid merging several reads (writes) into
one read (write), or optimizing them out by compiler.

Fixes commit 07906b3dad ("ARC: Switch to generic accessors")

Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
2020-03-31 18:25:16 +03:00
Tom Rini
150db4264d Merge branch '2020-03-31-master-imports'
- mpc8xxx GPIO, SPI bugfixes
- Add VxWorks to FIT images
- macb ethernet driver bugfix
2020-03-31 10:07:01 -04:00
Rasmus Villemoes
96e68c1621 gazerbeam: add clocks property to SPI node
Prepare for supporting setting different speeds in mpc8xxx_spi.c.

Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk>
2020-03-31 10:06:52 -04:00
Tom Rini
d1048a60cf Merge branch 'master' of git://git.denx.de/u-boot-socfpga 2020-03-31 10:05:25 -04:00
Tom Rini
962bb2e31b Merge branch 'master' of git://git.denx.de/u-boot-sh
- Fixes for Gen 2 V2H Blanche
2020-03-31 10:04:39 -04:00
Ley Foon Tan
df8e15af2b arm: dts: agilex: Enable QSPI
Enable QSPI for Agilex SoC devkit.

Signed-off-by: Ley Foon Tan <ley.foon.tan@intel.com>
2020-03-31 02:52:38 +02:00
Ley Foon Tan
3d884ff470 arm: socfpga: arria10: Add save_boot_params()
Add save_boot_params() to save reset status value from bootrom.

Bootrom will clear the status register in reset manager and stores the
reset status value in shared memory. Bootrom stores shared data at last
2KB of onchip RAM.

This function save reset status provided by bootrom to rst_mgr_status.
More information about reset status register value can be found in reset
manager register description.

When running in debugger without bootrom, r0 to r3 are random values.
So, skip save the value when r0 is not bootrom shared data address.

Signed-off-by: Ley Foon Tan <ley.foon.tan@intel.com>
2020-03-31 02:52:38 +02:00
Ley Foon Tan
69f9c8bab8 arm: socfpga: Add onchip RAM size macro
Add OCRAM size macro for Gen5 and Arria 10.

Signed-off-by: Ley Foon Tan <ley.foon.tan@intel.com>
2020-03-31 02:52:38 +02:00
Tom Rini
8e4af8f6d8 Merge https://gitlab.denx.de/u-boot/custodians/u-boot-fsl-qoriq
- Fixes env variable for layerscape platforms, disable hs200.
- Fixes board fixup, mux setting, enable gic, fspi on lx2160a, Fixes I2C
  DM Warning on ls1043a, ls1046a
- Fixes RGMII port on ls1046ardb, ls1046ardb and DM_USB Warning on
  ls1012afrdm, ls1021aiot
2020-03-30 14:14:07 -04:00
Tom Rini
3c4fb0e91e Merge branch 'master' of https://gitlab.denx.de/u-boot/custodians/u-boot-sunxi
- SPL SPI support R40, H6 (Andre)
- eMMC boot part on a64-olinuxino (Petr)
2020-03-30 14:13:59 -04:00
Kuldeep Singh
3ec7900b23 arm: dts: ls1028a: Use flexspi in octal I/O mode
Configure RX and TX bus-width values to use flexspi in octal I/O mode.
If bus-widths are not specified, then single I/O mode is set by default.

Signed-off-by: Kuldeep Singh <kuldeep.singh@nxp.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-03-30 08:12:13 +05:30
Kuldeep Singh
bd294e43dc arm: dts: lx2160a: Use flexspi in octal I/O mode
Configure RX and TX bus-width values to use flexspi in octal I/O mode.
If bus-widths are not specified, then single I/O mode is set by default.

Signed-off-by: Kuldeep Singh <kuldeep.singh@nxp.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-03-30 08:12:13 +05:30
Kuldeep Singh
4c1a52294f arm: dts: lx2160aqds: Add FSPI node properties
lx2160a-qds has 2 micron "mt35xu512aba" flashes of size 64M each
connected on A0 and B1 i.e on CS0 and CS3. Since flashes are connected
on different buses, only one flash can be probed at a time.

Add fspi node properties aligned with LX2160A-RDB fspi properties.

Signed-off-by: Kuldeep Singh <kuldeep.singh@nxp.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-03-30 08:12:13 +05:30
Biwen Li
bb1165f900 dm: arm64: ls1046a: add i2c DM support
This supports i2c DM and enables CONFIG_DM_I2C
for SoC LS1046A

Signed-off-by: Biwen Li <biwen.li@nxp.com>
Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-03-30 08:12:13 +05:30
Biwen Li
fefac937fb dm: arm64: ls1043a: add i2c DM support
This supports i2c DM and enables CONFIG_DM_I2C
for SoC LS1043A

Signed-off-by: Biwen Li <biwen.li@nxp.com>
Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-03-30 08:12:13 +05:30
Yuantian Tang
c40ebf7e43 board: ls1028ardb: add BOARD_LATE_INIT config
Select BOARD_LATE_INIT config so that many board works can be done
in late init stage.

Signed-off-by: Yuantian Tang <andy.tang@nxp.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-03-30 08:06:52 +05:30
Marek Vasut
9cf09c799a ARM: dts: rmobile: Enable IIC3 on V2H Blanche
Enable IIC3 to permit access to the PMIC.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2020-03-30 03:49:23 +02:00
Marek Vasut
fd2657314f ARM: dts: rmobile: Add IIC3 node on Gen2 R8A7792 V2H
Add IIC3 node from mainline Linux DT. This will be further updated in
subsequent DT sync, however adding this node for now is sufficient and
minimal change.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2020-03-30 03:49:23 +02:00
Otavio Salvador
99f946976e rv1108: Fix boot regression
Since commit 79030a4861 ("rockchip: Add Single boot image
(with binman, pad_cat)") the following boot regression is seen:

U-Boot 2020.04-rc3-00050-gd16e18ca6c-dirty (Mar 09 2020 - 11:40:07 -0300)

Model: Elgin RV1108 R1 board
DRAM:  128 MiB
initcall sequence 67fd12a0 failed at call 6000b927 (err=-22)

This happens because the above commit missed to include the
"rockchip-u-boot.dtsi" for rv1108, so include this file
like it done for other Rockchip SoC dtsi's.

Fixes: 79030a4861 ("rockchip: Add Single boot image (with binman, pad_cat)")
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2020-03-26 22:58:46 +08:00
Otavio Salvador
af84b3327a ARM: dts: Activate pullups in the console pins on rv1108-elgin-r1
In order to make the console pins more robust to noise, activate
the pullups and increase its drive strength.

Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2020-03-26 22:58:46 +08:00
Patrick Delaunay
9368bdfebd ram: stm32mp1: the property st, phy-cal becomes optional
This parameter "st,phy-cal" becomes optional and when it is
absent the built-in PHY calibration is done.

It is the case in the helper dtsi file "stm32mp15-ddr.dtsi"
except if DDR_PHY_CAL_SKIP is defined.

This patch also impact the ddr interactive mode
- the registers of the param 'phy.cal' are initialized to 0 when
  "st,phy-cal" is not present in device tree (default behavior when
  DDR_PHY_CAL_SKIP is not activated)
- the info 'cal' field can be use to change the calibration behavior
  - cal=1 => use param phy.cal to initialize the PHY, built-in training
             is skipped
  - cal=0 => param phy.cal is absent, built-in training is used (default)

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
Acked-by: Patrice Chotard <patrice.chotard@st.com>
2020-03-24 14:23:30 +01:00
Patrick Delaunay
e9a20f8a19 ram: stm32mp1: increase vdd2_ddr: buck2 for 32bits LPDDR
Need to increase the LPDDR2/LPDDR3 the voltage vdd2_ddr: buck2
form 1.2V to 1.25V for 32bits configuration.

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
Acked-by: Patrice Chotard <patrice.chotard@st.com>
2020-03-24 14:20:50 +01:00
Patrick Delaunay
1a4f57c895 ARM: dts: stm32mp1: DT alignment with Linux 5.6-rc1
This commit manages diversity for STM32M15x SOCs with:
- dedicated files to support all STM32MP15 SOCs family.
  The differences between those SOCs are:
  -STM32MP151 [1]: common file.
  -STM32MP153 [2]: STM32MP151 + CANs + a second CortexA7-CPU.
  -STM32MP157 [3]: STM32MP153 + DSI + GPU.
- new files to manage security diversity on STM32MP15x SOCs.
  On STM32MP15xY, "Y" gives information:
  -Y = A means no cryp IP and no secure boot.
  -Y = C means cryp IP + secure boot.
- stm32mp157 pinctrl files to better manage package diversity.

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
Acked-by: Patrice Chotard <patrice.chotard@st.com>
2020-03-24 14:18:36 +01:00
Ludovic Barre
40e70ab885 stm32mp: psci: set cntfrq register of cpu on
This path allows to set the cntfrq register of targeted cpu.

Signed-off-by: Ludovic Barre <ludovic.barre@st.com>
Reviewed-by: Patrick DELAUNAY <patrick.delaunay@st.com>
Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
Acked-by: Patrice Chotard <patrice.chotard@st.com>
2020-03-24 14:17:38 +01:00
Patrick Delaunay
050fed8a97 stm32mp1: add 800 MHz profile support
The STM32MP1 series is available in 3 different lines which are pin-to-pin
compatible:
- STM32MP157: Dual Cortex-A7 cores, Cortex-M4 core @ 209 MHz,
              3D GPU, DSI display interface and CAN FD
- STM32MP153: Dual Cortex-A7 cores, Cortex-M4 core @ 209 MHz
              and CAN FD
- STM32MP151: Single Cortex-A7 core, Cortex-M4 core @ 209 MHz

Each line comes with a security option (cryptography & secure boot)
& a Cortex-A frequency option :

- A : Cortex-A7 @ 650 MHz
- C : Secure Boot + HW Crypto + Cortex-A7 @ 650 MHz
- D : Cortex-A7 @ 800 MHz
- F : Secure Boot + HW Crypto + Cortex-A7 @ 800 MHz

This patch adds the support of STM32MP15xD and STM32MP15xF in U-Boot.

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
Acked-by: Patrice Chotard <patrice.chotard@st.com>
2020-03-24 14:16:33 +01:00
Patrick Delaunay
73306a125c arm: stm32mp: fdt: update kernel device tree according the part number
Update the kernel device tree for STM32MP15x product lines according
the used soc and its part number, when CONFIG_OF_SYSTEM_SETUP is activated:
- STM32MP15XA hasn't Crypto (cryp1/2)
- STM32M151 and STM32M153 hasn't 3D GPU and DSI host
- STM32M151 hasn't CAN FD and has single A7

For example:

FDT: cpu 1 node remove for STM32MP151AAA Rev.B
FDT: can@4400e000 node disabled for STM32MP151AAA Rev.B
FDT: gpu@59000000 node disabled for STM32MP151AAA Rev.B
FDT: dsi@5a000000 node disabled for STM32MP151AAA Rev.B

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
Acked-by: Patrice Chotard <patrice.chotard@st.com>
2020-03-24 14:15:11 +01:00
Patrick Delaunay
ac5e4d8af8 arm: stm32mp: add function get_soc_name
Add a function get_soc_name to get a string with the full name
of the SOC "STM32MP15xxx Rev.x"

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
Acked-by: Patrice Chotard <patrice.chotard@st.com>
2020-03-24 14:15:08 +01:00
Patrick Delaunay
718f7bf7ca arm: stm32mp: improve the error message for smc
Add the SMC code and operation for trace on errors.

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
Acked-by: Patrice Chotard <patrice.chotard@st.com>
2020-03-24 14:05:35 +01:00
Patrick Delaunay
7ae22d7278 arm: stm32mp: bsec: add permanent lock support in bsec driver
Add BSEC lock access (read / write) at 0xC0000000 offset of misc driver.
The write access only available for Trusted boot mode, based on new
SMC STM32_SMC_WRLOCK_OTP.

With the fuse command, the permanent lock status is accessed with
0x10000000 offset (0xC0000000 - 0x8000000 for OTP sense/program
divided by u32 size), for example:

Read lock status of fuse 57 (0x39)

  STM32MP> fuse sense 0 0x10000039 1

  Sensing bank 0:

  Word 0x10000039: 00000000

Set permanent lock of fuse 57 (0x39)

  STM32MP> fuse prog 0 0x10000039 1

  Sensing bank 0:

  Word 0x10000039: 00000000

WARNING: the OTP lock is updated only after reboot

WARING: Programming lock or fuses is an irreversible operation!
        This may brick your system.

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
Acked-by: Patrice Chotard <patrice.chotard@st.com>
2020-03-24 14:05:35 +01:00
Patrick Delaunay
df2d1b8fc4 arm: stm32mp: bsec: remove unneeded test
Remove the test offs < 0 , as offs is unsigned.

This patch solves the warnings when compiling with W=1
on stm32mp1 board:

In function ‘stm32mp_bsec_read’:
arch/arm/mach-stm32mp/bsec.c:368:11: warning:
comparison of unsigned expression < 0 is always false [-Wtype-limits]
  368 |  if (offs < 0 || (offs % 4) || (size % 4))
      |           ^
In function ‘stm32mp_bsec_write’:
arch/arm/mach-stm32mp/bsec.c:405:11: warning:
comparison of unsigned expression < 0 is always false [-Wtype-limits]
  405 |  if (offs < 0 || (offs % 4) || (size % 4))
      |           ^

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
Acked-by: Patrice Chotard <patrice.chotard@st.com>
2020-03-24 14:05:35 +01:00
Andre Przywara
48313fe510 sunxi: Move common defconfig options to Kconfig
Some config symbols are found in *almost* every _defconfig file for
Allwinner boards, because those options are actually a platform choice,
and not a per-board decision.
Some of these options are older, some have recently been added.

Move those options to be set for all Allwinner boards in their
respective Kconfig files.

The rationales are as follows:
- NR_DRAM_BANKS: All Allwinner SoC map DRAM at one contiguous region of
  address space only, starting at 1 GB. So it's always one bank.
- SPL_{DOS,EFI}_PARTITION: The Allwinner SPL does only support raw MMC
  accesses, we don't care about filesystems or partitions in there, so
  there is no need to define those symbols at all.
- USE_PREBOOT: We start USB early when a keyboard is configured, using the
  preboot env variable, so we need to set this variable.
- SYS_RELOC_GD_ENV_ADDR: We don't specify any ENV_ADDR, so need this
  symbol to be set (according to 8d8ee47e03).
- SYS_USB_EVENT_POLL_VIA_INT_QUEUE: According to commit eab9433aa5,
  specifying this reduces the latency of the USB keyboard handling, so
  this was formerly enabled in config headers for all Allwinner boards.

Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Acked-by: Maxime Ripard <mripard@kernel.org>
Tested-by: Jagan Teki <jagan@amarulasolutions.com> # Amarula A64-Relic
Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
2020-03-18 18:25:00 +05:30
Andre Przywara
fd40ad0d57 sunxi: SPL SPI: Add SPI boot support for the Allwinner H6 SoC
The Allwinner H6 SoC uses a quite different memory map, also changes the
clocks quite a bit. This requires some changes to the SPL SPI routine,
which hardcodes these values so far.

Using the just introduced helper functions to determine base address
and SPI controller generation, we can cover some of these differences
easily.
The clock setup is different, so requires some explicit code changes
there (reset and clock gate in one register at a different address).
Also we need to change the pinmux function to use a different set of
pins that the H6 uses for SPI0.

Eventually we can enable the H6 to use SPI booting in Kconfig.

Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
2020-03-18 18:12:04 +05:30
Andre Przywara
da19a0dbc8 sunxi: SPL SPI: Add SPI boot support for the Allwinner R40 SoC
Now that we can easily select an SoC specific SPI0 base address, adding
support for the Allwinner R40 is fairly trivial:
We set the base address, add this SoC to the ones that use PC23 and
enable it in Kconfig.

This allows booting from SPI flash on R40 boards.

Tested on a Bananapi M2 Berry with SPI flash connected to the header pins.

Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
2020-03-18 18:11:53 +05:30
Andre Przywara
56f51f3875 sunxi: SPL SPI: Introduce is_sun6i_gen_spi()
So far we were using the CONFIG_SUNXI_GEN_SUN6I symbol to select between
the two SPI controller generations used on Allwinner SoCs. This is a
convenience symbol to roughly differentiate between "older" and "newer"
generation of SoCs.

The H6 SoCs is the newest SoC so far, but is sufficiently different to
not define this symbol. However it is using a SPI controller compatible
to the "new gen" SoCs.

To prepare for H6 support, we replace the check for this single symbol
with an explicit function, which can later be extended.
For now we just return CONFIG_SUNXI_GEN_SUN6I in there, so this does not
create a functional change.

Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
2020-03-18 18:11:41 +05:30
Andre Przywara
2775e08a2b sunxi: SPL SPI: Split off SPI0 base address
So far on all supported Allwinner SoCs we find the old generation SPI
controller always at address 0x1c05000, and the new generation one at
0x1c68000. However the Allwinner R40 SoC has a new generation SPI at
the old address, and the H6 uses a completely different address.

So split off the base address from the respective SPI registers, by
changing the #defines to just contain offsets.
The base address is provided by a function, so it can easily be extended
later when support for those SoCs materialises.

This does not change the code size (since the toolchain is clever enough
to optimise this properly), also does not bring any functional change at
this point.

Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
2020-03-18 18:11:30 +05:30
Tom Rini
14eb12a3c8 Merge branch 'master' of https://gitlab.denx.de/u-boot/custodians/u-boot-sunxi
- Revert "sunxi: psci: avoid error address-of-packed-member"
2020-03-18 07:48:53 -04:00
Tomasz Duszynski
3586cb8227 Revert "sunxi: psci: avoid error address-of-packed-member"
Using memcpy() for some MMIO access is generally frowned upon and might
break things on some platforms. Allwinner H3, which fails to boot, being
an example here.

Moreover, fields being accessed are naturally aligned and warnings
produced by GCC have been quiesced for some time already by:

53dc8ae ("gcc-9: silence 'address-of-packed-member' warning")

That said, it should be okay to revert this commit.

This reverts commit 9bd34a69a4.

Cc: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Tomasz Duszynski <tduszyns@gmail.com>
Acked-by: Jagan Teki <jagan@amarulasolutions.com>
2020-03-18 15:37:08 +05:30
Tom Rini
2738f0edea Merge tag 'ti-v2020.07-next' of https://gitlab.denx.de/u-boot/custodians/u-boot-ti into next
K3 J721E:
* OSPI boot support
* Support for loading remote cores in R5 SPL
* PMIC ESM Support
* Minor fixes for R5F and C7x remoteproc drivers

K3 AM654:
* Update AVS class 0 voltages.
* Add I2C nodes

DRA7xx/AM57xx:
* Fixed Android boot on AM57xx

AM33/AM43/Davinci:
* switch to driver model for the net and mdio driver for baltos
* Add DM/DTS support for omap video driver
* Enable fastboot on am335x-evm
2020-03-17 11:59:58 -04:00
Bin Meng
5bde2152d4 riscv: Implement new SBI v0.2 extensions
Few v0.1 SBI calls are being replaced by new SBI calls that follows
v0.2 calling convention.

Implement the replacement extensions and few additional new SBI
function calls that makes way for a better SBI interface in future.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Pragnesh Patel <pragnesh.patel@sifive.com>
2020-03-17 11:29:54 +08:00
Bin Meng
1b3c8d6402 riscv: Introduce a new config for SBI v0.1
We now have SBI v0.2 which is more scalable and extendable to handle
future needs for RISC-V supervisor interfaces.

Introduce a new config and move all SBI v0.1 code under that config.
This allows to implement the new replacement SBI extensions cleanly
and remove v0.1 extensions easily in future. Currently, the config
is enabled by default. Once all M-mode software, with v0.1, is no
longer in use, this config option and all relevant code can be easily
removed.

This commit is inspired from Linux kernel patch:
https://patchwork.kernel.org/patch/11407361/

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Pragnesh Patel <pragnesh.patel@sifive.com>
2020-03-17 11:29:54 +08:00
Bin Meng
1e32715602 riscv: Add SBI v0.2 extension definitions
Few v0.1 SBI calls are being replaced by new SBI calls that follows
v0.2 calling convention.

This patch just defines these new extensions.

This commit is inspired from Linux kernel patch:
https://patchwork.kernel.org/patch/11407359/

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Pragnesh Patel <pragnesh.patel@sifive.com>
2020-03-17 11:29:54 +08:00
Bin Meng
f58fc34a2b riscv: Add basic support for SBI v0.2
The SBI v0.2 introduces a base extension which is backward compatible
with v0.1. Implement all helper functions and minimum required SBI
calls from v0.2 for now. All other base extension function will be
added later as per need.

As v0.2 calling convention is backward compatible with v0.1, remove
the v0.1 helper functions and just use v0.2 calling convention.

Add a new Kconfig options CONFIG_SBI for the new SBI v0.2 codes, and
let CONFIG_SBI_IPI depend on it.

This commit is inspired from Linux kernel patch:
https://patchwork.kernel.org/patch/11407363/

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Pragnesh Patel <pragnesh.patel@sifive.com>
2020-03-17 11:29:54 +08:00
Bin Meng
215c3a7701 riscv: Mark existing SBI as v0.1 SBI
As per the new SBI specification, current SBI implementation version
is defined as 0.1 and will be removed/replaced in future. Each of the
function call in 0.1 is defined as a separate extension which makes
easier to replace them one at a time.

Rename existing implementation to reflect that. This patch is just
a preparatory patch for SBI v0.2 and doesn't introduce any functional
changes.

This commit is inspired from Linux kernel patch:
https://patchwork.kernel.org/patch/11407355/

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Pragnesh Patel <pragnesh.patel@sifive.com>
2020-03-17 11:29:54 +08:00
Bin Meng
f295e00c61 riscv: Avoid calling sbi_clear_ipi()
There is no need for S-mode U-Boot to call sbi_clear_ipi() as it
can be cleared directly from S-mode. This saves some cycles.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Lukas Auer <lukas@auer.io>
2020-03-17 11:29:40 +08:00
Bin Meng
fe13692e23 riscv: Fix sbi_remote_sfence_vma{,_asid}
Currently sbi_remote_sfence_vma{,_asid} does not pass their arguments
to SBI at all, which is semantically incorrect.

This keeps in sync with Linux kernel commit:
  a21344dfc6ad: fix sbi_remote_sfence_vma{,_asid}

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Lukas Auer <lukas@auer.io>
2020-03-17 11:29:40 +08:00
Tom Rini
2c59412a9f mach-davinci: Hard-code the default SPL_LDSCRIPT path
As there is only one linker script to use in this case, rather than use
the BOARDDIR variable hard-code the path.

Cc: Lokesh Vutla <lokeshvutla@ti.com>
Suggested-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Lokesh Vutla <lokeshvutla@ti.com>
Reviewed-by: Masahiro Yamada <masahiroy@kernel.org>
2020-03-16 18:54:18 -04:00
Tom Rini
38fec8de5f edminiv2: Move CONFIG_SPL_LDSCRIPT to defconfig
As there is only one machine under mach-orion5x, having a Kconfig entry
for SPL_LDSCRIPT is not helpful, move this to the defconfig file.

Suggested-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Masahiro Yamada <masahiroy@kernel.org>
2020-03-16 18:54:18 -04:00
Tom Rini
d91cf006ee Kconfig: Remove redundant variable sets
In a few places we have Kconfig entries that set SPL_LDSCRIPT to what is
the default value anyways.  Drop these.

Cc: Michal Simek <monstr@monstr.eu>
Cc: Rick Chen <rick@andestech.com>
Cc: Philippe Reynes <tremyfr@yahoo.fr>
Cc: Eric Jarrige <eric.jarrige@armadeus.org>
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Rick Chen <rick@andestech.com>
Reviewed-by: Michal Simek <michal.simek@xilinx.com> (for Microblaze)
Reviewed-by: Masahiro Yamada <masahiroy@kernel.org>
2020-03-16 16:42:50 -04:00
Suman Anna
8f4109e09d armv8: K3: j721e: Add DSP internal memory regions in MMU table
The A72 U-Boot code supports early load and boot of a number of
remote processors including the C66_0 and C66_1 DSPs. The current
code supports only loading into the DDR regions which were already
given the appropriate memory attributes. The C66 DSPs also have L1
and L2 internal memory regions that can behave as normal-memories.

Add a new entry to the J721E MMU table covering these regions with
the appropriate memory attributes to allow the A72 U-Boot code to
support loading directly into these memory regions.

Signed-off-by: Suman Anna <s-anna@ti.com>
2020-03-16 12:32:47 +05:30
Tom Rini
6e3cd0a384 - stm32mp: fix dependency for CONFIG_STM32_ETZPC
-----BEGIN PGP SIGNATURE-----
 
 iQEzBAABCgAdFiEE56Yx6b9SnloYCWtD4rK92eCqk3UFAl5nyysACgkQ4rK92eCq
 k3Uz6Qf+KWNcWU4/2GA5qhhonfBgLqCs1McSv4WjfFKVclWpnqpx4N/tjKwTi3PR
 h3TnwAyMihTOwr4pbbwSenZcLmcUX1aqc4509+clLIltyU+phSKCYZqPra/fiTh/
 6eiyXXwgUEzAUnqKO1wer/apgCgY2SmZxMvG+Huq6EGPl6UCANLeyYr2+um/skG4
 ufFI6DReR1UrmxSykJlgkurHKa5PnipODeOixbiKpAGo28vve+i4t1T4GL+bQLW9
 ZvTP5gN0dV9Hq1MBauJ7pIY5LPBfgRH+swvD/li9hePhjb47d1y5ZGfKhXGD72xo
 p+QgxYxukItWSiEOCRDRXVhlusJfUg==
 =Z9NT
 -----END PGP SIGNATURE-----

Merge tag 'u-boot-stm32-20200310' of https://gitlab.denx.de/u-boot/custodians/u-boot-stm

- stm32mp: fix dependency for CONFIG_STM32_ETZPC
2020-03-12 12:50:09 -04:00
Lokesh Vutla
6e44aebdbb arm: mach-k3: Add a separate function for printing sysfw version
Add a separate function for printing sysfw version so that it can be
called independently of k3_sysfw_loader.

Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
2020-03-11 08:56:49 +05:30
Tom Rini
36bdcf7f3b Merge tag 'mmc-2020-3-9' of https://gitlab.denx.de/u-boot/custodians/u-boot-mmc
- DM support for CAxxxx SoCs
- eMMC board for presidio-asic
- Add defer probe for mmc sdhci
- TI SoCs mmc misc update
2020-03-10 21:13:26 -04:00
Sam Shih
db41d985f6 arm: mediatek: remove unused binman config
The binman-option BINMAN_FDT is introduced by this commit:
commit 3c10dc95bd ("binman: Add a library to access binman entries")
BINMAN_FDT being selected when BINMAN=y that resulting in mt7623
and mt7622 are unable to boot. The root cause of this issue is commit:
commit cbd2fba1ec ("arm: MediaTek: add basic support for MT7629 boards")
select BINMAN=y in all mediatek SoCs, and others mediatek SoCs not
expect to use BINMAN_FDT.
This patch remove BINMAN=y option when ARCH_MEDIATEK=y and
move this to the specify SoCs part config.

Signed-off-by: Sam Shih <sam.shih@mediatek.com>
Tested-by: Frank Wunderlich <frank-w@public-files.de>
2020-03-10 17:08:13 -04:00
Patrick Delaunay
7a02e4d53c stm32mp: update dependency for STM32_ETZPC
Correct the dependency for STM32 ETZPC protection, linked to SOC
STM32MP identified by CONFIG_STM32MP15x and not linked to
CONFIG_TARGET_STM32MP1 (no more existing).

This patch fix an issue introduced by commit 846254888e ("stm32mp1:
split board and SOC support for STM32MP15x family").

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
Acked-by: Patrice Chotard <patrice.chotard@st.com>
2020-03-10 18:11:02 +01:00
Alifer Moraes
a604b67b87 arm: dts: imx8mq-evk: add phy-reset-gpios for fec1
Instead of resetting the ethernet phy through functions in imx8mq_evk.c, let the
driver reset the phy via dts description adding a reset duration of 10 ms
following atheros 8031's datasheet recommendation.

Signed-off-by: Alifer Moraes <alifer.wsdm@gmail.com>
2020-03-10 10:59:08 +01:00