Commit graph

20429 commits

Author SHA1 Message Date
Joseph Chen
11406b8f7e dm: regulator: support regulator more state
support parse regulator standard property:
regulator-off-in-suspend;
regulator-init-microvolt;
regulator-suspend-microvolt:
 regulator_get_suspend_enable
 regulator_set_suspend_enable
 regulator_get_suspend_value
 regulator_set_suspend_value

Signed-off-by: Joseph Chen <chenjh@rock-chips.com>
Signed-off-by: Elaine Zhang <zhangqing@rock-chips.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2019-11-10 20:31:09 +08:00
Tom Rini
a4b7485e2f Merge branch 'master' of git://git.denx.de/u-boot-usb
- Assorted fixes
2019-11-08 14:05:07 -05:00
Tom Rini
ee1c499851 Merge branch '2019-11-07-master-imports'
- Add Phytium Durian Board
- Assorted bugfixes
- Allow for  make ERR_PTR/PTR_ERR architecture specific
2019-11-08 07:27:45 -05:00
Udit Agarwal
bef1845404 freescale/powerpc: Rename the config CONFIG_SECURE_BOOT name
Rename the CONFIG_SECURE_BOOT name to CONFIG_NXP_ESBC to avoid
conflicts with UEFI secure boot.

Signed-off-by: Udit Agarwal <udit.agarwal@nxp.com>
Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
2019-11-08 16:32:08 +05:30
Udit Agarwal
5536c3c9d0 freescale/layerscape: Rename the config CONFIG_SECURE_BOOT name
Rename CONFIG_SECURE_BOOT to CONFIG_NXP_ESBC to avoid conflict
with UEFI secure boot.

Signed-off-by: Udit Agarwal <udit.agarwal@nxp.com>
Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
2019-11-08 16:32:08 +05:30
Laurentiu Tudor
30449aea50 armv8: lx2160a: add icid setup for platform devices
Add ICID setup for the platform devices contained on this chip: usb,
sata, sdhc, sec.

Signed-off-by: Laurentiu Tudor <laurentiu.tudor@nxp.com>
Reviewed-by: Horia Geanta <horia.geanta@nxp.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2019-11-08 11:13:38 +05:30
Keerthy
6b86dd0c1e power: pmic: tps65941: Add support for tps65941 family of PMICs
Add support to bind the regulators/child nodes with the pmic.

Signed-off-by: Keerthy <j-keerthy@ti.com>
2019-11-07 18:39:16 -05:00
Keerthy
9a03e50c5f misc: k3_avs: Add j721e support
j721e SoCs have different OPP tables. Add support for the same.

Note: DM Still has lot of voltages TBD hence the correct
values need to be programmed once they are published.

Signed-off-by: Keerthy <j-keerthy@ti.com>
2019-11-07 18:39:16 -05:00
Tero Kristo
9d233b4e3e misc: k3_avs: add driver for K3 Adaptive Voltage Scaling Class 0
Adaptive Voltage Scaling is a technology used in TI SoCs to optimize
the operating voltage based on characterization data written to efuse
during production. Add a driver to support this feature for K3 line of
SoCs, initially for AM65x.

Signed-off-by: Tero Kristo <t-kristo@ti.com>
Signed-off-by: Keerthy <j-keerthy@ti.com>
2019-11-07 18:39:16 -05:00
liu hao
e3aafef4cf arm: add initial support for the Phytium Durian Board
This adds platform code and the device tree for the Phytium Durian Board.
The initial support comprises the UART and the PCIE.

Cc: Bin Meng <bmeng.cn@gmail.com>
Cc: Kever Yang <kever.yang@rock-chips.com>
Cc: Tom Rini <trini@konsulko.com>
Cc: Heinrich Schuchardt <xypron.glpk@gmx.de>

Signed-off-by: Steven Hao <liuhao@phytium.com.cn>
2019-11-07 18:01:13 -05:00
Simon Goldschmidt
8c59ca93b8 linux err: make ERR_PTR/PTR_ERR architecture specific
This patch changes ERR_PTR/PTR_ERR to use CONFIG_ERR_PTR_OFFSET to map
errno values into a pointer region that cannot contain valid pointers.

IS_ERR and IS_ERR_OR_NULL have to be converted to use PTR_ERR, too,
for this to work.

Signed-off-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
2019-11-07 18:01:13 -05:00
Tom Rini
d911087889 Merge https://gitlab.denx.de/u-boot/custodians/u-boot-mpc85xx
- mpc85xx, socrates: Add dts, enable DM support, fix warnings, disable
  video
2019-11-07 07:25:14 -05:00
T Karthik Reddy
f69257baa8 usb: composite: add BOS descriptor support to composite framework
To add usb-3.0 support to peripheral device add BOS & SS capability
descriptors to gadget composite framework.

Signed-off-by: T Karthik Reddy <t.karthik.reddy@xilinx.com>
Signed-off-by: Siva Durga Prasad Paladugu <siva.durga.paladugu@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Roger Quadros <rogerq@ti.com>
2019-11-07 00:24:59 +01:00
Sherry Sun
8d94e184ff usb: udc: Introduce ->udc_set_speed() method
This patch was copied from kernel commit: 67fdfda4a99ed.

Sometimes, the gadget driver we want to run has max_speed lower than
what the UDC supports. In such situations, UDC might want to make sure
we don't try to connect on speeds not supported by the gadget
driver because that will just fail.

So here introduce a new optional ->udc_set_speed() method which can be
implemented by interested UDC drivers to achieve this purpose.

Signed-off-by: Sherry Sun <sherry.sun@nxp.com>
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
2019-11-07 00:24:59 +01:00
Vignesh Raghavendra
77dcbdf3c1 usb: gadget: Add match_ep() op to usb_gadget_ops
Add match_ep() op to usb_gadget_ops similar to Linux kernel which is
useful in finding a suitable ep match for the function driver. This will
avoid adding more gadget_is_xxx() handling code to usb_ep_autoconfig().

Also sync usb_ep_caps struct thats is usually used in the match_ep()
callback by the gadget controller driver

Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
2019-11-07 00:24:59 +01:00
Vignesh Raghavendra
c93e305af7 bitmaps: import for_each_set_bit() macro
Import for_each_set_bit() and associated macros and functions from
Linux. This is useful in parsing interrupt registers and take action on
each bit that is set.

Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
2019-11-07 00:24:59 +01:00
Vignesh Raghavendra
c37f594280 list: import list_first_entry_or_null()
Import list_first_entry_or_null() macro from Linux that would be used
by Cadence USB driver

Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
2019-11-07 00:24:59 +01:00
Tom Rini
a8c1846633 Merge branch 'master' of git://git.denx.de/u-boot-usb
- DFU updates
- USB Storage updates
2019-11-06 07:11:02 -05:00
Tom Rini
e64ebde12d Merge tag 'mmc-2019-11-5' of https://gitlab.denx.de/u-boot/custodians/u-boot-mmc
- fsl_esdhc driver cleanup
- fsl_esdhc_imx driver improvement and compatible string update
2019-11-06 07:10:16 -05:00
Heiko Schocher
2a51fe01be mpc85xx, socrates: add DM PCI support
add DM PCI support on the socrates board.
use PCIE_FSL now.

Signed-off-by: Heiko Schocher <hs@denx.de>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2019-11-06 16:30:19 +05:30
Heiko Schocher
98beb60a2a mpc85xx, socrates: enable DM serial
switch to DM_SERIAL support.

Signed-off-by: Heiko Schocher <hs@denx.de>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2019-11-06 16:30:19 +05:30
Heiko Schocher
92746bac88 mpc85xx, socrates: enable DM I2C
enable DM I2C support for the socrates board.

Signed-off-by: Heiko Schocher <hs@denx.de>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2019-11-06 16:30:19 +05:30
Heiko Schocher
4c65a449ae mpc85xx, socrates: disable VIDEO
disable video, as not really needed longer.

Signed-off-by: Heiko Schocher <hs@denx.de>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2019-11-06 16:30:19 +05:30
Heiko Schocher
39642abf56 mpc85xx, socrates: add DM support
enable CONFIG_DM for the socrates board.

Signed-off-by: Heiko Schocher <hs@denx.de>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2019-11-06 16:30:19 +05:30
Heiko Schocher
e4ee459e7a mpc85xx, socrates: suppress unknown flash warning
suppress warning:
Flash: ## Unknown flash on Bank 1 - Size = 0x00000000 = 0 MB

Signed-off-by: Heiko Schocher <hs@denx.de>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2019-11-06 16:30:19 +05:30
Peng Fan
bdcf3a88cc imx: imx8mm-evk: enable ethernet
add phy-reset-gpios to reset phy
Add board_phy_config to configure phy
Enable DM_ETH

Signed-off-by: Peng Fan <peng.fan@nxp.com>
2019-11-05 10:27:18 +01:00
Peng Fan
d239d9d946 imx: add i.MX8MN DDR4 board support
Support pinctrl/clk/sdhc, include ddr4 timing data.

Log:
U-Boot SPL 2019.10-rc3-00356-g497c500423-dirty (Sep 16 2019 - 10:54:58 +0800)
Normal Boot
Trying to boot from BOOTROM
image offset 0x8000, pagesize 0x200, ivt offset 0x0

U-Boot 2019.10-rc3-00356-g497c500423-dirty (Sep 16 2019 - 10:54:58 +0800)

CPU:   Freescale i.MX8MNano rev1.0 at 24 MHz
Reset cause: POR
Model: NXP i.MX8MNano DDR4 EVK board
DRAM:  2 GiB
MMC:   FSL_SDHC: 1, FSL_SDHC: 2
Loading Environment from MMC... *** Warning - bad CRC, using default environment

In:    serial
Out:   serial
Err:   serial
Net:   No ethernet found.
Hit any key to stop autoboot:  0

Signed-off-by: Peng Fan <peng.fan@nxp.com>
2019-11-05 10:27:18 +01:00
Peng Fan
dadb072f12 imx: add dtsi for i.MX8MN
Add dtsi for i.MX8MN

Signed-off-by: Peng Fan <peng.fan@nxp.com>
2019-11-05 10:27:18 +01:00
Peng Fan
b8f168346b tools: imx8mimage: add ROM VERSION
The IVT offset is changed on i.MX8MN. Use ROM_VERSION to pass the
v1 or v2 to mkimage.
v1 is for iMX8MQ and iMX8MM
v2 is for iMX8M Nano (iMX8MN)

Signed-off-by: Peng Fan <peng.fan@nxp.com>
2019-11-05 10:27:18 +01:00
Yangbo Lu
0cc127c424 mmc: fsl_esdhc: always check write protect state
The QorIQ eSDHC on all platforms supports checking write protect
state through register bit. So check it always.

Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
2019-11-05 11:21:25 +08:00
Yangbo Lu
5b05fc0310 mmc: fsl_esdhc: fix voltage validation
Voltage validation should be done by CMD8. Current comparison between
mmc_cfg voltages and host voltage capabilities is meaningless.
So drop current comparison and let voltage validation is through CMD8.

Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
2019-11-05 11:21:24 +08:00
Simon Glass
8659895350 fdt: Add INT32_MAX to kernel.h for libfdt
Unfortunately libfdt needs this value now, which is present in the
stdint.h header. That file is just a placeholder in U-Boot and these sorts
of constants appear in the linux/kernel.h header instead.

To keep libfdt happy, add INT32_MAX too.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
2019-11-04 18:15:32 -07:00
Tom Rini
73b6e6ad25 u-boot-imx-20191104
-------------------
 
 - i.MX NAND: nandbcb support for MX6UL / i.MX7
 - i.MX8: support for HAB
 - Convert to DM (opos6ul, mccmon6)
 - Toradex i.MX6ull colibri
 - sync DTS with kernel
 
 Travis : https://travis-ci.org/sbabic/u-boot-imx/builds/606853416
 -----BEGIN PGP SIGNATURE-----
 
 iQHDBAABCgAtFiEEiZClFGvhzbUNsmAvKMTY0yrV63cFAl2/6YYPHHNiYWJpY0Bk
 ZW54LmRlAAoJECjE2NMq1et3qSAL/37iSxotpJEcvCcAg0x96n6na/O0SjT3NkoT
 glPaFXLkzR7hbK5yR3g2P0LuNGRGkCQbuz61Hn4wNLRySVodvIJ1pUITu9GaLnex
 graG/ssqdPMEWU0LDoatr/fgoCQo7DEKOuzRmvHAYus7LZJ6edctOyTXuiMhPZ+T
 DJ51RAUq11CleuA8nnz/iV2WCR8pw9sPS7P016lrDF+sWLIqm+/UMnwiIUV4KVhI
 og/fevJfE52vOdV1the6xgpffQGICckNUFREgXaPo3JsP67icPiUGQ4RiFhHp+ff
 rNyMdD/g6YZOoMoWda989h0l3gBwKjBQ9eGG05V8GEmyxzzkOGa5So2O9NzG90CQ
 vcOlEsC/siNZ87B5VkVkWjmrEnHcICtAFJSSntC7pLxtQMMqMbioRe5w+zmSrWeH
 GYh9cxe3ABLYBxISrT6BTfyXs0cD5tMl6D9snLaGyUzHcH2AGkVTkVabemuMSpIZ
 kBzNRFmx3+3Ync+CoaLA+G1YRXmgSw==
 =zlN+
 -----END PGP SIGNATURE-----

Merge tag 'u-boot-imx-20191104' of https://gitlab.denx.de/u-boot/custodians/u-boot-imx

u-boot-imx-20191104
-------------------

- i.MX NAND: nandbcb support for MX6UL / i.MX7
- i.MX8: support for HAB
- Convert to DM (opos6ul, mccmon6)
- Toradex i.MX6ull colibri
- sync DTS with kernel

Travis : https://travis-ci.org/sbabic/u-boot-imx/builds/606853416
2019-11-04 12:57:41 -05:00
Tom Rini
3b02d614b4 Merge branch '2019-11-04-ti-imports'
- Various CPSW related improvements, DTS resync
2019-11-04 12:57:34 -05:00
Grygorii Strashko
62f8e846a7 net: ti: cpsw: convert to use dev/ofnode api
Conver TI CPSW driver to use dev/ofnode api.

Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
[trini: Add <dm/ofnode.h> to provide the prototype to ofnode]
Signed-off-by: Tom Rini <trini@konsulko.com>
2019-11-04 12:56:37 -05:00
Tom Rini
ee93ef0c4b Merge https://gitlab.denx.de/u-boot/custodians/u-boot-x86
- Add support for Intel FSP-S and FSP-T in binman
- Correct priority selection for image loaders for SPL
- Add a size check for TPL
- Various small SPL/TPL bug fixes and changes
- SPI: Add support for memory-mapped flash
2019-11-03 19:28:54 -05:00
Igor Opaniuk
9ab5f221a5 nand: mxs_nand: add API for switching different BCH layouts
On i.MX7 in a sake of reducing the disturbances caused by a neighboring
cells in the FCB page in the NAND chip, a randomizer is enabled when
reading the FCB page by ROM bootloader.

Add API for setting BCH to specific layout (and restoring it back) used by
ROM bootloader to be able to burn it in a proper way to NAND using
nandbcb command.

Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
Signed-off-by: Anti Sullin <anti.sullin@artecdesign.ee>
Tested-by: Max Krummenacher <max.krummenacher@toradex.com>
Reviewed-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
2019-11-03 21:49:19 +01:00
Oliver Graute
eef72440db imx: support i.MX8QM ROM 7720 a1 board
Add i.MX8QM ROM 7720a1 board support

Boot log as below:
U-Boot 2019.10-rc3-00004-gd073e0242f (Sep 20 2019 - 08:24:13 +0200)

CPU:   NXP i.MX8QM RevB A53 at 1200 MHz

Model: Advantech iMX8QM Qseven series
Board: ROM-7720-A1 4GB
Build: SCFW 65afe5f6
Boot:  SD2
DRAM:  4 GiB
MMC:   FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2
Loading Environment from MMC... OK
In:    serial@5a060000
Out:   serial@5a060000
Err:   serial@5a060000
Net:   eth0: ethernet@5b040000Could not get PHY for FEC1: addr 1
, eth-1: ethernet@5b050000
Hit any key to stop autoboot:  0

Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com>
Cc: Stefano Babic <sbabic@denx.de>
Cc: Fabio Estevam <festevam@gmail.com>
Cc: Peng Fan <peng.fan@nxp.com>
Cc: Simon Glass <sjg@chromium.org>
Cc: Ye Li <ye.li@nxp.com>
Cc: uboot-imx <uboot-imx@nxp.com>
2019-11-03 21:18:00 +01:00
Hannes Schmelzer
c04ac5bd40 board/BuR/brppt2: initial commit
This commit adds support for the brppt2 board. The board is based on the
i.mx6 dual-lite SoC.

Signed-off-by: Hannes Schmelzer <hannes.schmelzer@br-automation.com>
2019-11-03 21:17:55 +01:00
Peng Fan
6dcc6cebcf imx8qxp: mek: add secure boot script
Add secure boot script, use ahab to verify image

Signed-off-by: Peng Fan <peng.fan@nxp.com>
2019-11-03 17:04:16 +01:00
Peng Fan
b06ff8f50d imx8qm: mek: add secure boot script
Add secure boot script, use ahab to verify image

Signed-off-by: Peng Fan <peng.fan@nxp.com>
2019-11-03 17:04:16 +01:00
Peng Fan
698c439815 dt-bindings: import usb pd
Import usb pd bindings from Linux 5.4.0-rc1.
This file will be included by imx8mm-evk.dts.

Signed-off-by: Peng Fan <peng.fan@nxp.com>
2019-11-03 17:04:16 +01:00
Sébastien Szymanski
b1be79b417 opos6uldev: migrate to DM_VIDEO
Migrate to DM_VIDEO, update the device tree and remove code that is no
longer necessary.

Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Sébastien Szymanski <sebastien.szymanski@armadeus.com>
2019-11-03 17:04:16 +01:00
Sébastien Szymanski
b72dd938ec imx6ul: opos6ul: migrate to DM_ETH
Migrate to DM_ETH and remove code that is no longer necessary.

Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Sébastien Szymanski <sebastien.szymanski@armadeus.com>
2019-11-03 17:04:16 +01:00
Patrick Wildt
05737f3585 imx: update i.MX8MQ device trees
This updates the i.MX8MQ device trees and, necessarily, also the
i.MX8MQ clock bindings.  These are taken verbatim from from the
Linux kernel version v5.4-rc2, which three small changes which
were already part of the previous device tree:

 * Keep the PSCI reserved memory range
 * Keep the alias for ethernet, so that the MAC address can be set
 * Keep the modified #include for the IOMUXC pins

Signed-off-by: Patrick Wildt <patrick@blueri.se>
Acked-by: Peng Fan <peng.fan@nxp.com>
2019-11-03 17:04:16 +01:00
Lukasz Majewski
e4417ed03e ARM: imx: Convert mccmon6 to use fitImage instead of uImage+DTB
This commit enabled support for fitImage on mccmon6 when we
switch to DT/DTS (including falcon mode).

Signed-off-by: Lukasz Majewski <lukma@denx.de>
2019-11-03 17:04:16 +01:00
Lukasz Majewski
8e64181a99 ARM: imx: Convert mccmon6 to use DM/DTS in the u-boot proper
This commit converts mccmon6's u-boot proper (in a single commit to avoid
build breaks) to use solely DM/DTS.

The DTS description of the mccmon6 has been ported from Linux kernel
(v4.20, SHA1: 8fe28cb58bcb235034b64cbbb7550a8a43fd88be)

Signed-off-by: Lukasz Majewski <lukma@denx.de>
2019-11-03 17:04:16 +01:00
Grygorii Strashko
3c57b620db net: ti: cpsw: add support for standard eth "max-speed" dt property
This patch adds support for standard Ethernet "max-speed" DT property to
allow PHY link speed limitation.

Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
2019-11-03 09:36:06 -05:00
Simon Glass
c53b318e1b spi: Add support for memory-mapped flash
On x86 platforms the SPI flash can be mapped into memory so that the
contents can be read with normal memory accesses.

Add a new SPI method to find the location of the SPI flash in memory. This
differs from the existing device-tree "memory-map" mechanism in that the
location can be discovered at run-time.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2019-11-03 07:20:26 +08:00
Simon Glass
e1500a6ce2 spl: Correct priority selection for image loaders
At present the name of the image comes first in the linker-list symbol
used. This means that the name of the function sets the sort order, which
is not the intention.

Update it to put the boot-device type first, then the priority. This
produces the expected behaviour.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2019-11-03 07:20:26 +08:00
Heinrich Schuchardt
895ae8726d cbfs: do not pack struct cbfs_cachenode
With the __packed attribute sandbox_defconfig cannot be compiled with GCC
9.2.1:

fs/cbfs/cbfs.c: In function ‘file_cbfs_fill_cache’:
fs/cbfs/cbfs.c:164:16: error: taking address of packed member of
‘struct cbfs_cachenode’ may result in an unaligned pointer value
[-Werror=address-of-packed-member]
  164 |   cache_tail = &new_node->next;
      |                ^~~~~~~~~~~~~~~

struct cbfs_cachenode is only an internal structure. So let's rearrange the
fields such that the structure is naturally packed and remove the __packed
attribute.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2019-11-02 18:00:51 +08:00
Tom Rini
61e8f2985b Merge tag 'arc-fixes-for-2020.01-rc2' of https://gitlab.denx.de/u-boot/custodians/u-boot-arc
ARC fixes for v2020.01-rc2

The main change is move to DM_MMC of yet 2 another ARC boards:
AXS101 & IoTDK.

Among that we improve handling of stock-formatted SD-cards of high volume
on EM SDP as well as introduction of reset driver for HSDK which is required
for prepser reinitialization of some peripherals like USB etc.
2019-11-01 17:49:40 -04:00
Eugeniy Paltsev
c597e248d9 ARC: HSDK: introduce reset driver
Introduce reset driver for Synopsys ARC HSDK SoC

Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
2019-11-01 16:45:40 +03:00
Tom Rini
bb1bb4bb5d Fix for patman with email addresses containing commas
Bootstage improvements for TPL, SPL
 Various sandbox and dm improvements and fixes
 -----BEGIN PGP SIGNATURE-----
 
 iQFFBAABCgAvFiEEslwAIq+Gp8wWVbYnfxc6PpAIreYFAl24zDoRHHNqZ0BjaHJv
 bWl1bS5vcmcACgkQfxc6PpAIreZRiwf+Mf7oG//zjiZcHaPP6KOFb1CjwqLSuiaI
 eCYB6GEZXuSpc8MjAw+baAfIw8MMFuaCfPsUQ5dDo391neK0sW9kkEsdcXnQBpB3
 GdJYcewLN1UuJZovriGobIisGc0GQHh8gmRcVGWSKoEt+gAQauRtVYBIUPuS3JG+
 ihZgYmVgICa+3tqavIbP2oZdXLuLAxR65mfiQHtiJwdCN3OOzyls2v0T0slQX9GV
 ln6EvTk8OMIudBmkB7YiTmJF7AB+3PH/uBaiYyTKO9gtjLhnmCFvG5HxJTRFOKvU
 F4oVWZJDEcqfZvYgWg8i5vgokMP41nzLfBr7j5ifUX1f3xwCHy/Tpw==
 =S4XI
 -----END PGP SIGNATURE-----

Merge tag 'dm-pull-29oct19' of git://git.denx.de/u-boot-dm

- Fix for patman with email addresses containing commas
- Bootstage improvements for TPL, SPL
- Various sandbox and dm improvements and fixes
2019-11-01 09:34:35 -04:00
Jean-Jacques Hiblot
4e18429883 drivers: phy: Handle gracefully NULL pointers
For some controllers PHYs can be optional. Handling NULL pointers without
crashing nor failing, makes it easy to handle optional PHYs.

Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
2019-10-31 07:22:53 -04:00
Heinrich Schuchardt
f279e1d916 lib: errno: avoid error format-overflow
In cmd/regulator.c an error occurs with GCC 9.2.1 if CONFIG_ERRNO_STR is
not defined:

cmd/regulator.c: In function ‘failure’:
cmd/regulator.c:20:2: error: ‘%s’ directive argument is null
[-Werror=format-overflow=]
   20 |  printf("Error: %d (%s)\n", ret, errno_str(ret));
      |  ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
In function ‘constraint’,
    inlined from ‘constraint’ at cmd/regulator.c:111:12:
cmd/regulator.c:115:3: error: ‘%s’ directive argument is null
[-Werror=format-overflow=]
  115 |   printf(" %s (err: %d)\n", errno_str(val), val);
      |   ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

errno_str() should return a valid string instead of NULL if
CONFIG_ERRNO_STR is not defined.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-10-31 07:22:53 -04:00
Marek Vasut
80e7e7c2ab lib: time: Add microsecond timer
Add get_timer_us(), which is useful e.g. when we need higher
precision timestamps.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Tom Rini <trini@konsulko.com>
Cc: Simon Glass <sjg@chromium.org>
[trini: Fixup arch/arm/mach-bcm283x/include/mach/timer.h]
Signed-off-by: Tom Rini <trini@konsulko.com>
2019-10-31 07:22:53 -04:00
Patrick Wildt
52e1d93c14 NVMe: do PCI enumerate before nvme scan
Make sure that the PCI busses are enumerated before trying to
find a NVMe device.

Signed-off-by: Patrick Wildt <patrick@blueri.se>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2019-10-31 07:22:53 -04:00
Patrick Delaunay
067c13c70b dfu: add callback for flush and initiated operation
Add weak callback to allow board specific behavior
- flush
- initiated

This patch prepare usage of DFU back end for communication with
STM32CubeProgrammer on stm32mp1 platform with stm32prog command.

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-10-31 12:12:31 +01:00
Patrick Delaunay
ec44cace4b dfu: add DFU virtual backend
Add a virtual DFU backend to allow board specific read and write
(for OTP update for example).

Acked-by: Lukasz Majewski <lukma@denx.de>
Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-10-31 12:12:31 +01:00
Patrick Delaunay
d5640f700d dfu: add partition support for MTD backend
Add the support of MTD partition for the MTD backend.

The expected dfu_alt_info for one alternate on the mtd device :
	<name> part <part_id>
        <name> partubi <part_id>

"partubi" also erase up to the end of the partition after write operation.

For example: dfu_alt_info = "spl part 1;u-boot part 2; UBI partubi 3"

U-Boot> dfu 0 mtd nand0

Acked-by: Lukasz Majewski <lukma@denx.de>
Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-10-31 12:12:31 +01:00
Patrick Delaunay
6015af28ee dfu: add backend for MTD device
Add DFU backend for MTD device: allow to read
and write on all MTD device (NAND, SPI-NOR,
SPI-NAND,...)

For example :
> set dfu_alt_info "nand_raw raw 0x0 0x100000"
> dfu 0 mtd nand0

This MTD backend provides the same level than dfu nand
backend for NAND and dfu sf backend for SPI-NOR;
So it can replace booth of them but it also
add support of spi-nand.

> set dfu_alt_info "nand_raw raw 0x0 0x100000"
> dfu 0 mtd spi-nand0

The backend code is based on the "mtd" command
introduced by commit 5db66b3aee ("cmd: mtd:
add 'mtd' command")

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-10-31 12:12:31 +01:00
Patrick Delaunay
9ada683055 dfu: prepare the support of multiple interface
Split the function dfu_config_entities with 2 new functions
- dfu_alt_init
- dfu_alt_add

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-10-31 12:12:31 +01:00
Patrick Delaunay
cb986ba0fe dfu: sf: add partition support for nor backend
Copy the partition support from NAND backend to SF,
support part and partubi option.
In case of ubi partition, erase the rest of the
partition as it is mandatory for UBI.

The added code is under compilation flag CONFIG_DFU_SF_PART
activated by default.

for example:

U-Boot> env set dfu_alt_info "spl part 0 1;\
u-boot part 0 2;u-boot-env part 0 3;UBI partubi 0 4"
U-Boot> dfu 0 sf 0:0:10000000:0

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-10-31 12:12:31 +01:00
Tom Rini
412326d1bc Merge tag 'u-boot-clk-23Oct2019' of https://gitlab.denx.de/u-boot/custodians/u-boot-clk
- Add I2C clocks for i.MX6Q CCF driver
- Fix check in clk_set_default_parents()
- Managed API to get clock from device tree
- Fixes for core clock code (including sandbox regression tests)
2019-10-30 13:13:46 -04:00
Tom Rini
ba742b839c Merge branch '2019-10-28-azure-ci-support'
- Clean up Travis-CI slightly and then add support for Microsoft Azure
  pipelines, all from Bin Meng.
2019-10-30 09:05:13 -04:00
Tom Rini
cc64810dc6 Merge https://gitlab.denx.de/u-boot/custodians/u-boot-sunxi
- H6 dts(i) sync (Clément)
- H6 PIO (Icenowy)
- Fix pll1 clock calculation (Stefan)
- H6 dram, half DQ (Jernej)
- A64 OLinuXino eMMC (Sunil)
2019-10-30 09:04:52 -04:00
Bin Meng
10289b4ed9 linux/types.h: Surround 'struct ustat' with __linux__
'struct ustat' uses linux-specific typedefs to declare its memebers:
__kernel_daddr_t and __kernel_ino_t. It is currently not used by any
U-Boot codes, but when we build U-Boot tools for other platform like
Windows, this becomes a problem.

Let's surround it with __linux__.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
2019-10-28 13:32:51 -04:00
Bin Meng
1af5e97d8d tools: image.h: Use portable uint32_t instead of linux-specific __be32
__be32 has Linux kernel specific __attribute__((bitwise)) which is
not portable. Use uint32_t instead.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
2019-10-28 13:32:50 -04:00
Jean-Jacques Hiblot
d60ae4c59d fdt: Fix alignment issue when reading 64-bits properties from fdt
The FDT specification [0] gives a requirement of aligning properties on
32-bits. Make sure that the compiler is aware of this constraint when
accessing 64-bits properties.

[0]: https://github.com/devicetree-org/devicetree-specification/blob/master/source/flattened-format.rst

Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2019-10-27 13:01:53 -06:00
Simon Glass
5256beecb8 bootstage: Mark the start/end of TPL and SPL separately
At present bootstage in TPL and SPL use the same ID so it is not possible
to see the timing of each. Separate out the IDs and use the correct one
depending on which phase we are at.

Example output:

Timer summary in microseconds (14 records):
       Mark    Elapsed  Stage
          0          0  reset
    224,787    224,787  TPL
    282,248     57,461  end TPL
    341,067     58,819  SPL
    925,436    584,369  end SPL
    931,710      6,274  board_init_f
  1,035,482    103,772  board_init_r
  1,387,852    352,370  main_loop
  1,387,911         59  id=175

Accumulated time:
                   196  dm_r
                 8,300  dm_spl
                14,139  dm_f
               229,121  fsp-m
               262,992  fsp-s

Signed-off-by: Simon Glass <sjg@chromium.org>
2019-10-27 10:56:51 -06:00
Simon Glass
5ca5ec1e32 dm: regmap: Fix mask in regmap_update_bits()
This function assumes that the 'val' parameter has no masked bits set.
This is not defined by the function prototype though. Fix the function to
mask the value and update the documentation.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
2019-10-27 10:56:41 -06:00
Simon Glass
91a8c95623 sandbox: test: Show hex values on failure
Quite a few tests use addresses or hex values for comparisons. Add hex
output for test failures, e.g.:

   0x55ca22fa == reg: Expected 0x55ca22fa (1439310586),
	got 0x55ea22fb (1441407739)

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2019-10-27 10:56:41 -06:00
Tom Rini
ffc379b42c - bmips: add BCRM NAND support for BCM6368, BCM6328, BCM6362 and BCM63268 SoCs
- bmips: various small fixes
 - mtmips: add new drivers for clock, reset-controller and pinctrl
 - mtmips: add support for high speed UART
 - mtmips: update/enhance drivers for SPI and ethernet
 - mtmips: add support for MMC
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEiQkHUH+J02LLC9InKPlOlyTyXBgFAl2zFisACgkQKPlOlyTy
 XBgf9RAAkNwLjqUcBz3Ob1briRG5HF4D6bZCpjtkTIO8a2fanUHbSehh30TX8x2X
 z0t/9Sd4OZwAeTxfQ/AlbbVdiB9IMgEb6lJ30Vr88MRNoPhABIQ8hw5xAzFi/6x9
 88YolS/HQo6iR9rzSlaKjdIHhPTH5oQzRJ3JLqSwZzfUNy+zqINEhs3SYCnD2lyV
 gTgiIT3Y5nKrhVHPUCy+jQG+wwWej2NFgwn71vR3/PSQJwxBuasg0qqOKD9hRtpC
 XL6VErE7bf00elO8xjEObYrmB2FpffXJdkazS2HtRYNyKx0quaRNXJt7wqxEVP9L
 M6SmL+S7zBFAetc/iyrlaakPvn7ImehSZkgLYaTPc3yzO+6bgq9tLfBERn/B/s5g
 YyIzPGF66L96nuu0eVGCgSoUBjzBE8l2QTI8dho5xJxjWAUJOWSB0egqfFZzYVFu
 4X37w6Z0j6uTK2oEl7KgJdc0JsZRsAJ8ZiqgOeNeMUTl2RnjGt0Oa7E24Va3n3hM
 5vuEba9nPUFmdC5vlSd2RUK/dB587uKV93r5j54U62clpbiK+VMaRuRVX64ytZvB
 B/0fKyCu+y7bxeZe4/X27jBUOk5yCuxbNI66m+cnnvfHqEmhz5PfDCEK1Dr29oqf
 sCJLgTr7ahyuW4kEoL7KCOBEugPI85fp8/OlqC63M6/Kft0w5sA=
 =6G/J
 -----END PGP SIGNATURE-----

Merge tag 'mips-pull-2019-10-25' of git://git.denx.de/u-boot-mips

- bmips: add BCRM NAND support for BCM6368, BCM6328, BCM6362 and BCM63268 SoCs
- bmips: various small fixes
- mtmips: add new drivers for clock, reset-controller and pinctrl
- mtmips: add support for high speed UART
- mtmips: update/enhance drivers for SPI and ethernet
- mtmips: add support for MMC
2019-10-25 20:07:24 -04:00
Tom Rini
271103ac0b Merge branch 'master' of git://git.denx.de/u-boot-usb
- DWC3 improvements
- i.MX7 EHCI bugfix
2019-10-25 13:50:51 -04:00
Tom Rini
e382713d22 Xilinx/FPGA changes for v2020.01 part 2
common:
 - Fix manual relocation for repeatable commands
 
 arm:
 - Also clean up generated dtbos
 
 microblaze:
 - Add support for Manual relocation in crypto framework
 - Tune and align architecture bootm support
 
 zynq:
 - DT sync ups
 - Some defconfig updates
 - Remove empty board_early_init_f()
 
 zynqmp:
 - Clean firmware handing via drivers/firmware/
 - DT/defconfig name alignments
 - DT cleanups with using firmware based clock driver
 - Some defconfig updates
 - Add IIO ina226 DT description
 - Tune zynqmp_psu_init_minimalize.sh script
 - Add single nand mini configuration, e-a2197, m-a2197-02/03 and zcu216
 
 versal:
 - Clean firmware handing via drivers/firmware/
 - Add gpio support
 - Enable DT overlay/USB/CLK/FPGA
 - DT updates
 - Tune mini configuration
 
 spi:
 - gqspi - Remove unused headers
 -----BEGIN PGP SIGNATURE-----
 
 iF0EABECAB0WIQQbPNTMvXmYlBPRwx7KSWXLKUoMIQUCXbKa4QAKCRDKSWXLKUoM
 ISzJAJ0YpGS7HziGFVRBlcsyRH8QlWCqOQCfb0jIWzhL8pvj9TA01CdU0Axdbwk=
 =GIpp
 -----END PGP SIGNATURE-----

Merge tag 'xilinx-for-v2020.01-part2' of https://gitlab.denx.de/u-boot/custodians/u-boot-microblaze

Xilinx/FPGA changes for v2020.01 part 2

common:
- Fix manual relocation for repeatable commands

arm:
- Also clean up generated dtbos

microblaze:
- Add support for Manual relocation in crypto framework
- Tune and align architecture bootm support

zynq:
- DT sync ups
- Some defconfig updates
- Remove empty board_early_init_f()

zynqmp:
- Clean firmware handing via drivers/firmware/
- DT/defconfig name alignments
- DT cleanups with using firmware based clock driver
- Some defconfig updates
- Add IIO ina226 DT description
- Tune zynqmp_psu_init_minimalize.sh script
- Add single nand mini configuration, e-a2197, m-a2197-02/03 and zcu216

versal:
- Clean firmware handing via drivers/firmware/
- Add gpio support
- Enable DT overlay/USB/CLK/FPGA
- DT updates
- Tune mini configuration

spi:
- gqspi - Remove unused headers
2019-10-25 11:23:46 -04:00
Weijie Gao
443a206386 mips: mtmips: change baudrate table for all boards
This patch changes baudrate table for all boards preparing for using mtk
highspeed uart driver.

Signed-off-by: Weijie Gao <weijie.gao@mediatek.com>
2019-10-25 17:20:44 +02:00
Weijie Gao
f7ae6b682c reset: add reset controller driver for MediaTek MIPS platform
This patch adds reset controller driver for MediaTek MIPS platform and
header file for mt7628.

Signed-off-by: Weijie Gao <weijie.gao@mediatek.com>
2019-10-25 17:20:44 +02:00
Weijie Gao
77ed3c42fe clk: add clock driver for MediaTek MT76x8 platform
This patch adds a clock driver for MediaTek MT7628/7688 SoC.
It provides clock gate control as well as getting clock frequency for
CPU/SYS/XTAL and some peripherals.

Signed-off-by: Weijie Gao <weijie.gao@mediatek.com>
2019-10-25 17:20:44 +02:00
Álvaro Fernández Rojas
f923c758e0 bmips: correct name characters
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2019-10-25 17:20:43 +02:00
Álvaro Fernández Rojas
55daf1c45c bmips: configs: switch to size definitions
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Reviewed-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2019-10-25 17:20:43 +02:00
Álvaro Fernández Rojas
9e484636f1 mips: bmips: remove unneeded definitions
These are no longer needed.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Reviewed-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2019-10-25 17:20:43 +02:00
Álvaro Fernández Rojas
331bee8786 bmips: enable vr-3032u nand support
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2019-10-25 17:20:43 +02:00
Frieder Schrempf
832ce20278 mtd: spi: Clean up usage of CONFIG_SPI_FLASH_MTD
Most boards currently use SPI_FLASH_MTD only in U-Boot proper, not in
SPL. They often rely on hacks in the board header files to include
this option conditionally. To be able to fix this, we previously
introduced a separate option SPL_SPI_FLASH_MTD.

Therefore we can now adjust the Makefile and change the code in
sf_probe.c and sf_internal.h to use CONFIG_IS_ENABLED(SPI_FLASH_MTD).

We also need to move all occurences of CONFIG_SPI_FLASH_MTD from the
header files to the according defconfigs. The affected boards are
socfpga, aristainetos, cm_fx6, display5, ventana, rcar-gen2, dh_imx6
and da850evm.

We do this all in one patch to guarantee bisectibility.

This change was tested with buildman to make sure it does not
introduce any regressions by comparing the resulting binary sizes.

Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
Reviewed-by: Stefan Roese <sr@denx.de>
Reviewed-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
Acked-by: Lukasz Majewski <lukma@denx.de>
Reviewed-by: Heiko Schocher <hs@denx.de>
Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
2019-10-25 00:48:32 +05:30
Bin Meng
4b06000395 dm: spi: Change cs_info op to return -EINVAL for invalid cs num
We need distinguish the following two situations in various SPI APIs:

- given chip select num is invalid
- given chip select num is valid, but no device is attached

Currently -ENODEV is returned for both cases.

For the first case, it's more reasonable to return -EINVAL instead of
-ENODEV for invalid chip select numbers.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Tested-by: Jagan Teki <jagan@amarulasolutions.com> # SoPine
Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
2019-10-25 00:48:31 +05:30
Tom Rini
17fd9915a4 Merge branch '2019-10-24-UFS-support'
- Add Universal Flash Storage (UFS) support
2019-10-24 09:51:48 -04:00
Michal Simek
0435a82f32 dt-bindings: arm64: zynqmp: Add power and reset headers
Add power and reset headers to be sources by ZynqMP dtses.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-24 13:37:02 +02:00
Rajan Vaja
bdc27185bc dt-bindings: clock: zynqmp: Add clk header
Add dt clock header which can be included by dtses. And also use zynqmp-clk
compatible string.

Signed-off-by: Rajan Vaja <rajan.vaja@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-24 13:37:02 +02:00
Michal Simek
c4690c54b7 ARM: zynq: Move BOOTM_NETBSD to Kconfig
The commit 4b0bcfa7c4 ("Kconfig: Migrate CONFIG_BOOTM_* options")
moved BOOTM_ options to Kconfig that's why align zynq defconfig with it.

Disabling NETBSD was done by commit d6f48ea5ce
("ARM: zynq: Do not enable NETBSD support by default").

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-24 13:37:01 +02:00
Michal Simek
403619515e arm64: zynqmp: Convert invoke_smc() to xilinx_pm_request()
Remove macros which use PM_SIP_SVC offset and convert invoke_smc() to
xilinx_pm_request() which do calculation with PM_SIP_SVC already.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-24 13:37:01 +02:00
Michal Simek
6596270ecb arm64: versal: Rename versal_pm_request to xilinx_pm_request
Use generic name instead of Versal specific because this should be also
used on ZynqMP.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-24 13:37:01 +02:00
Michal Simek
866225f394 arm64: xilinx: Move firmware functions from platform to driver
versal_pm_request() and invoke_smc() are almost the same. Only one
difference is that versal_pm_request is adding PM_SIP_SVC offset to api_id.
The patch is moving platform implementation to firmware driver code for
synchronization.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Luca Ceresoli <luca@lucaceresoli.net>
2019-10-24 13:37:01 +02:00
Michal Simek
0f3604a2b3 arm64: versal: Clean pm_api_id usage
Copy enum values from platform code to firmware code. IDs are shared
between ZynqMP and Versal.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-24 13:37:01 +02:00
Tom Rini
c9e40996f9 Merge https://gitlab.denx.de/u-boot/custodians/u-boot-marvell
- Add support for HyperBus Memory Controller of TI's J721e
  and AM654 SoCs (Vignesh)
2019-10-24 07:32:21 -04:00
Jean-Jacques Hiblot
1708a12377 usb: xhci: move xhci.h to include usb
The xhci.h header file is currently located under drivers/usb/xhci
Move it to the include/usb folder to make it available to drivers that
are not under drivers/usb/xhci

Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
2019-10-24 11:28:17 +02:00
Vignesh Raghavendra
1fc18e173e configs: j721e_evm.h: Define CONFIG_SYS_MAX_FLASH_BANKS_DETECT
Define CONFIG_SYS_MAX_FLASH_BANKS_DETECT so that number of flash banks
are automatically detected by CFI flash driver

Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Reviewed-by: Stefan Roese <sr@denx.de>
2019-10-24 09:49:27 +02:00
Faiz Abbas
13b6770c05 env: ti: Add environment variables to boot from UFS
Add environment variables to boot kernel from a filesystem contained in
the 2nd UFS LUN. The user can boot from a ufs filesystem just by
entering the following commands.

=> setenv boot ufs
=> boot

Signed-off-by: Faiz Abbas <faiz_abbas@ti.com>
2019-10-23 20:47:12 -04:00
Faiz Abbas
7feafb0ae4 ufs: Add Initial Support for UFS subsystem
Add Support for UFS Host Controller Interface (UFSHCI) for communicating
with Universal Flash Storage (UFS) devices. The steps to initialize the
host controller interface are the following:

- Initiate the Host Controller Initialization process by writing to the
Host controller enable register.
- Configure the Host Controller base address registers by allocating a
host memory space and related data structures.
- Unipro link startup procedure
- Check for connected device
- Configure UFS host controller to process requests

Also register this host controller as a SCSI host controller.

Taken from Linux Kernel v5.2 (drivers/scsi/ufs/ufshcd.c) and ported to
U-boot.

Signed-off-by: Faiz Abbas <faiz_abbas@ti.com>
2019-10-23 20:47:12 -04:00
Faiz Abbas
8fbac8e23e scsi: Add dma direction member to command structure
Some SCSI devices like UFS use DMA for executing scsi commands and hence
need to know the direction of transfer of the dma. Add a dma_dir element
to the command structure to facilitate this.

Signed-off-by: Faiz Abbas <faiz_abbas@ti.com>
2019-10-23 20:47:12 -04:00
Faiz Abbas
4ff572830e scsi: Add max_bytes_per_req to scsi_platdata
Add max_bytes_per_req to scsi_platdata to enable the host driver to limit
the number of bytes that can be read/written per request.

Signed-off-by: Faiz Abbas <faiz_abbas@ti.com>
2019-10-23 20:47:12 -04:00
Tom Rini
680023c5fa - Disable CONFIG_NET flag for MCU STM32
- Fix ramdisk_addr_r for stm32f746-disco
 - Fix USB product id for stm32mp1
 -----BEGIN PGP SIGNATURE-----
 
 iQEzBAABCgAdFiEE56Yx6b9SnloYCWtD4rK92eCqk3UFAl2wHd8ACgkQ4rK92eCq
 k3UEBQgAkVeXgew8P7Z/ATK6jGArMWF+OGbh+Eveb1/vD1opcizyvVm4gxg/RRQA
 +yDuXhd0fXoaug4okDXplJXg7j6YRVr2PUPVoGYMcaLOX4TUcXXf+6rYycC4mzVS
 5vF5Fb9k+Wu/5rI+7y0IJH2zoAvLtEJ1+8vDwH3oCIBgsTYn54FwOXU76ni9NzA/
 n5Gs8Xn09TJb5BtZ/CNdBYgJ+4bDystzhVTbmaAUYSX075wMl4+Dax9EZLwc5941
 3Ix5yzsDRYObrLhvZgSr3EaVcoxa6y7E3488D9o5voPbDsO5XMXf72MVFjMGJClQ
 03q2RP1rNnDYzfGvPTztWPpSvgxC0A==
 =UmF/
 -----END PGP SIGNATURE-----

Merge tag 'u-boot-stm32-2019-10-23' of https://gitlab.denx.de/u-boot/custodians/u-boot-stm

- Disable CONFIG_NET flag for MCU STM32
- Fix ramdisk_addr_r for stm32f746-disco
- Fix USB product id for stm32mp1
2019-10-23 14:04:02 -04:00
Jean-Jacques Hiblot
fd1ba29652 drivers: clk: Fix using assigned-clocks in the node of the clock it sets up
This fixes the case where assigned-clocks is used to define a clock
defaults inside this same clock's node. This is used sometimes to setup a
default parents and/or rate for a clock.

example:
muxed_clock: muxed_clock {
	clocks = <&clk_provider 0>, <&clk_provider 1>;
	#clock-cells = <0>;
	assigned-clocks = <&muxed_clock>;
	assigned-clock-parents = <&clk_provider 1>;
};

It doesn't work in u-boot because the assigned-clocks are setup *before*
the clock is probed. (clk_set_parent() will likely crash or fail if called
before the device probe function)
Making it work by handling "assigned-clocks" in 2 steps: first before the
clk device is probed, and then after the clk device is probed.

Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
2019-10-22 16:14:05 +02:00
Jean-Jacques Hiblot
52720c536f drivers: clk: Add a managed API to get clocks from the device-tree
Add devm_clk_get(), devm_clk_get_optional() to get clocks from the
device-tree. The clocks is automatically released and the data structure
freed when the device is unbound.
Also add devm_clk_put() to release the clock and free the data structure
manually.

Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
2019-10-22 16:14:05 +02:00
Jean-Jacques Hiblot
8a1661f20e drivers: clk: Handle gracefully NULL pointers
Prepare the way for a managed CLK API by handling NULL pointers without
crashing nor failing.

Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
2019-10-22 16:14:05 +02:00
Patrice Chotard
f77b9ab97c configs: stm32f746-disco: Fix ramdisk_addr_r
Set ramdisk_addr_r to 0xC0600000.

Reported-by: Christophe Priouzeau <christophe.priouzeau@st.com>
Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
Acked-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-10-22 10:59:57 +02:00
Kuldeep Singh
6972c60f8c configs: ls1012afrwy: Add CONFIG_ENV_ADDR
This configuration enables picking the environment from flash before
DDR init.

Signed-off-by: Kuldeep Singh <kuldeep.singh@nxp.com>
Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
2019-10-21 15:34:17 +05:30
Kuldeep Singh
60b0055ba5 configs: ls1012ardb: Add CONFIG_ENV_ADDR
CONFIG_ENV_ADDR config option enables picking the environment from
flash before DDR init.

Signed-off-by: Ashish Kumar <Ashish.Kumar@nxp.com>
Signed-off-by: Kuldeep Singh <kuldeep.singh@nxp.com>
Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
2019-10-21 15:34:17 +05:30
Tom Rini
4b5c4dd93a Pull request for UEFI sub-system for efi-2020-01-rc1 (2)
Install the simple file protocol only if there is a file system on the
 partition.
 
 Enable CONFIG_CMD_NVEDIT_EFI on QEMU.
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEEbcT5xx8ppvoGt20zxIHbvCwFGsQFAl2p9OcACgkQxIHbvCwF
 GsRLAg//fmqk3B7FInPfQ6fxfyMx3Ck2EosoePjf0IsMq0nfGIVMigXZwpUtwkwN
 LBmp/Vf8mkRfFNWk55/qzecdgCoVKx1nN1YoqsGh/ZFsX+1L3Kd01ODJw0in0T8N
 GwMm0sbSk+EqWp4JMs9seZBL5S1PfCZ59rzRcvgLq+9VgZX9+LxLeIidZ3bh/++w
 1fo5jZtWavKNuCqgU9cUlT2FLgE+8q+W1ZAVmD1fDs3ef7Xys8UaTOP3M9jtT9AS
 ruletzPRmJ1GFe9xC94qIfij4ZXclo2tt7L3c6QeTpiwcav5HFiQIsRvvssnRpma
 GYZyyu2CNgjChjqOvGMFftWvR3kZWUHCEFFxZzH+0YfdcU1MNfwtQjieviuJGc5S
 sOK/SWvsdEoHow85NNAmDDJUcR1MfakMjFyM+fcs/YtUoJHoP6LKQwAmJMpMLPq4
 6164ymvdoo8YD3cYLP9yvsJ+r9GW3FNUloBwAwz3OMJy1uXoi1igMv60dMBCLJDC
 cftW48sFivg0oSb+780xiJwyjjreg9dRqmlp0lhsxuGDPA2YqxNiAZs/Q2geEM3+
 LJmeB78PvGAuzU1LPW34IsYyplRa21y1y+IbOceRdcbOmY6XT8Zf9eMInKdoE78i
 gal2rjNdHoGX8v5WchUNNmIVjQQqDMf1jOi/lfkeivKu16/68HY=
 =X+Tw
 -----END PGP SIGNATURE-----

Merge tag 'efi-2020-01-rc1-2' of https://gitlab.denx.de/u-boot/custodians/u-boot-efi

Pull request for UEFI sub-system for efi-2020-01-rc1 (2)

Install the simple file protocol only if there is a file system on the
partition.

Enable CONFIG_CMD_NVEDIT_EFI on QEMU.
2019-10-18 16:37:03 -04:00
Guillaume La Roque
be2ffa1656 configs: sei610: Add config file to fix userdata size
Add separate config file to handle the different eMMC size on
the sei610 board.

Signed-off-by: Guillaume La Roque <glaroque@baylibre.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2019-10-18 14:54:37 +02:00
Guillaume La Roque
880c0aa91d configs: sei510: rework header and fix userdata size
Move android generic config and boot sequence in meson64_android header
and fix size of userdata to use all eMMC on SEI510.

Signed-off-by: Guillaume La Roque <glaroque@baylibre.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2019-10-18 14:51:14 +02:00
Neil Armstrong
5be4afe15f ARM: dts: Import SEI610 DT from Linux 5.4-rc2
Import the Amlogic SM1 DT and the SEI610 board DT from [1]

[1] da0c9ea146cb ("Linux 5.4-rc2")

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2019-10-18 14:29:59 +02:00
Andreas Färber
1a87cc7891 arm: dts: Import and update DT for Khadas VIM3
In Linux meson-g12-common.dtsi was introduced as well as new g12b nodes
and headers, as dependencies of new meson-g12b-a311d-khadas-vim3.dts.

Copied from da0c9ea146cb ("Linux 5.4-rc2")

Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2019-10-18 11:57:00 +02:00
Neil Armstrong
3b12fecebd configs: sei510: enable Video Display support
Add the necessary config options to support BMP display over HDMI,
and add a preboot command to load the BMP file from a predefined
eMMC partition.

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Anatolij Gustschin <agust@denx.de>
2019-10-18 11:54:22 +02:00
AKASHI Takahiro
b7cd95627b fs: add fs_get_type() for current filesystem type
This function is a variant of fs_get_type_name() and returns a filesystem
type with which the current device is associated.
We don't want to export fs_type variable directly because we have to take
care of it consistently within fs.c.

Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-10-17 19:19:56 +02:00
Heinrich Schuchardt
e4bad9f9f0 fs: update fs_close() description
Provide a more detailed description of fs_close().

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-10-17 19:19:55 +02:00
AKASHI Takahiro
64f49eb7d0 fs: export fs_close()
fs_close() closes the connection to a file system which opened with
either fs_set_blk_dev() or fs_set_dev_with_part(). Many file system
functions implicitly call fs_close(), e.g. fs_closedir(), fs_exist(),
fs_ln(), fs_ls(), fs_mkdir(), fs_read(), fs_size(), fs_write()
and fs_unlink().
So just export it.

Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-10-17 19:19:55 +02:00
Tom Rini
a2fce50455 Merge tag 'for-v2020.01' of https://gitlab.denx.de/u-boot/custodians/u-boot-ubi
ubi enhancements for 2020.01
- provide a way for skipping crc checks ported from linux, and add an
  U-Boot command to set this flag on already installed systems.
- fix redundand environment management
2019-10-17 07:26:16 -04:00
Tom Rini
c83b1bb923 binman enhancements:
- Dropping some test Elf files and building them from source instead
 - Refactoring of x86 16-bit entries
 - Support for SPL symbols within sections
 - Handle the 'notes' sections and hidden symbols in recent binutils
 - Improved error reporting with a tool fails
 
 libfdt and documentation fixes
 vboot required-key test
 driver model power-domain controls
 patman Message-Id enhancement
 -----BEGIN PGP SIGNATURE-----
 
 iQEzBAABCgAdFiEEslwAIq+Gp8wWVbYnfxc6PpAIreYFAl2l20YACgkQfxc6PpAI
 reZQQQgA0zxySnZR6IuTr+MXJP019SjU0T/rj2Ob77ODhLTtLtE3aFYgBIsyyOyr
 /NZ6V7wPhCfGGBGWdPzYdOUIkG5L4O+1zrwWGgVJCAAaCaDlJVIXmljJ667SE9ps
 9jfJW/nkzgsa/cOweOUJF3vBUKnDN1pv9aTXwAXttzv/OqaZ1AaUObnmeZ9fzr65
 mXjR7/eLYx26KQ8IEo8hhgdFhN/d/aUtSCYPWASqtcI9TLg8A5gmtNxy83+w8gzC
 kFIr7c0QjZ3EQHLyD4/MAcGvhZZMBPbV6dyIO19hUS80S1l1yMTd72iTYuvG8bAt
 5TzlQCSqvGryF6TRxVn8GPr2/T0v/A==
 =Oo/D
 -----END PGP SIGNATURE-----

Merge tag 'dm-pull-15oct19' of https://gitlab.denx.de/u-boot/custodians/u-boot-dm

binman enhancements:
- Dropping some test Elf files and building them from source instead
- Refactoring of x86 16-bit entries
- Support for SPL symbols within sections
- Handle the 'notes' sections and hidden symbols in recent binutils
- Improved error reporting with a tool fails

libfdt and documentation fixes
vboot required-key test
driver model power-domain controls
patman Message-Id enhancement
2019-10-16 18:10:31 -04:00
Heinrich Schuchardt
cb578f0a87 arm: remove the H2200 board
U-Boot cannot be built for h2200_defconfig with CONFIG_DM=y.

The maintainer Lukasz Dalek suggested to remove the board.
https://lists.denx.de/pipermail/u-boot/2019-August/380685.html

Cc: Lukasz Dalek <luk0104@gmail.com>
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
[trini: As this is the last non-toradex PXA board, update travis too]
Signed-off-by: Tom Rini <trini@konsulko.com>
2019-10-16 18:09:08 -04:00
Philippe Reynes
6116234174 ubi: env: fix redundand management
We check (with a #if defined()) the config ENV_UBI_VOLUME_REDUND
to know if there is a redundant env. But this config is a string
and is always defined with env is in ubi, so we always consider
that a redundand env is used.

To fix this issue, I've added a hidden flag ENV_UBI_IS_VOLUME_REDUND
that is true when ENV_UBI_VOLUME_REDUND is not "". Then, I check
this flag in the code, instead of the string ENV_UBI_VOLUME_REDUND.

hs: fixed typo s/condider/consider

Signed-off-by: Philippe Reynes <philippe.reynes@softathome.com>
Reviewed-by: Heiko Schocher <hs@denx.de>
2019-10-16 05:53:37 +02:00
Quentin Schulz
386f20cade ubi: provide a way to skip CRC checks
Some users of static UBI volumes implement their own integrity check,
thus making the volume CRC check done at open time useless. For
instance, this is the case when one use the ubiblock + dm-verity +
squashfs combination, where dm-verity already checks integrity of the
block device but this time at the block granularity instead of verifying
the whole volume.

Skipping this test drastically improves the boot-time.

Adapted to U-Boot by Stefan Roese.

Signed-off-by: Quentin Schulz <quentin.schulz@bootlin.com>
Signed-off-by: Stefan Roese <sr@denx.de>
Reviewed-by: Heiko Schocher <hs@denx.de>
Cc: Quentin Schulz <quentin.schulz@bootlin.com>
Cc: Boris Brezillon <boris.brezillon@bootlin.com>
2019-10-16 05:42:27 +02:00
Lokesh Vutla
0cf795a802 power: domain: Introduce dev_power_domain_off
Add dev_power_domain_off() api to disable all the power-domains
corresponding to a device

Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2019-10-15 08:40:03 -06:00
Lokesh Vutla
af94ad418d dm: core: Allow for not controlling the power-domain by DM framework
In some remoteproc cases, enabling the power domain of the core will
start running the core. In such cases image should be loaded before
enabling the power domain. But the current DM framework enables the
power-domain by default during probe. This is causing the remotecore
to start and crash as there is no valid image loaded.

In order to avoid this introduce a DM flag that doesn't allow for
enabling/disabling the power-domain by DM framework.

Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2019-10-15 08:40:03 -06:00
Jean-Jacques Hiblot
d8efa2ce2a dm: device: Fix typo in the non-DEVRES version of devm_kmalloc_array()
When DEVRES is not set, devm_kmalloc_array() is spelled
devm_kmaloc_array() (with one 'l' only).
Fixing it so that the name is the same with and without DEVRES.

Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2019-10-15 08:40:03 -06:00
Peng Fan
9c1e982218 power: domain: add dev_power_domain_on
Add this new API to power on multiple domains attached
to a device.

Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Lokesh Vutla <lokeshvutla@ti.com>
Changed to static inline and added a condition into C file:
Signed-off-by: Simon Glass <sjg@chromium.org>
2019-10-15 08:40:02 -06:00
Matthias Brugger
7a3f15e718 dm: Fix default address cells return value
Default address cells value on the livetree access function
returns the wrong value. Fix this so that the value returned
corresponds to the device tree specification.

Signed-off-by: Matthias Brugger <mbrugger@suse.com>
2019-10-15 08:40:02 -06:00
Sam Protsenko
35e99836ca image: android: Fix possible build errors
As android_image.h uses types like u32, we need to include corresponding
headers in place. Otherwise the user will be forced to include those in
C file, or next build error can occur:

    include/android_image.h:32:5: error: unknown type name 'u32'
         u32 kernel_size; /* size in bytes */

Include required headers for data types used. While at it, remove
typedef struct, which is prohibited by kernel coding style, and fix the
comment.

Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
2019-10-15 09:56:04 -04:00
Tom Rini
6891152a45 Merge branch 'master' of git://git.denx.de/u-boot-socfpga
- vining_fpga updates
2019-10-14 21:00:10 -04:00
Tom Rini
6f1f28b8e1 u-boot-imx-20191014
-------------------
 
 Travis: https://travis-ci.org/sbabic/u-boot-imx/builds/597498628
 
 	- logicpd pinmux
 	- i.MX7ULP: imx_ddr_size
 	- fixes Toradex i.MX6/i.MX7
 	- pico-imx7d
 	- tpc70 converted to DM
 	- New Board: meerkat96
 	- add HAB version command
 	- i.MX8 :
       		imx8: Jump from alias to OCRAM address at SPL init
       		imx8qm/qxp: Set SPL TEXT base to OCRAM base
 -----BEGIN PGP SIGNATURE-----
 
 iQHDBAABCgAtFiEEiZClFGvhzbUNsmAvKMTY0yrV63cFAl2kbrYPHHNiYWJpY0Bk
 ZW54LmRlAAoJECjE2NMq1et30iQL/RDCe3R1MuQPQdjBEUcb+ZXP8/vaAAbgAsv6
 MNN/ybJ8pIXGVF5qxJxzZgMcUvIq1vy8romomIwVBOr7gueoYMokpKeE95P4XK2r
 HmFM+/ZcXIXvDrHrULDquAvCG6zhOMHXdbmWcQcZLcHSCsZpkh4YuuGzFVpxTgNE
 kTJpEF+Orw49w9wMVKeqfv9z3MsYkr/vV3kH/+ISndN6cOBOjV56Qzl/hlzxiN1d
 wueTQi1pxUVjbsKWIkf76XTeSa5621bM01+YMN3CFq/AWhVMbpnaWWGB6ET4NBjD
 k/BjRgCZ+/hwjpHnbylHEmsLolNsIXn8KirE73OCmIvov/vUYaaZJ5lBzU+L2A5k
 tK6p1LOTvsRxKBsN49hQIQLJMcn/sp9RpP9ohgCs3lj7bKGAQ1HoxqylypeDGPv1
 htKGdBFGiEfoCus1Ob7NAevYAPlVM7h+mDzFSYhlr9BZnrDj2V3nwICj8KV3wkwl
 lPiUQiYMUhgvSSSiU2NJDSy1onjSXA==
 =J8jd
 -----END PGP SIGNATURE-----

Merge tag 'u-boot-imx-20191014' of https://gitlab.denx.de/u-boot/custodians/u-boot-imx

u-boot-imx-20191014
-------------------

Travis: https://travis-ci.org/sbabic/u-boot-imx/builds/597498628

	- logicpd pinmux
	- i.MX7ULP: imx_ddr_size
	- fixes Toradex i.MX6/i.MX7
	- pico-imx7d
	- tpc70 converted to DM
	- New Board: meerkat96
	- add HAB version command
	- i.MX8 :
      		imx8: Jump from alias to OCRAM address at SPL init
      		imx8qm/qxp: Set SPL TEXT base to OCRAM base
2019-10-14 13:00:51 -04:00
Tom Rini
cd5ffc5de5 - panel bridge support in stm32 ltdc
- DSI host uclass
 - sandbox DSI host uclass test driver and DSI host test
 - MIPI DSI helpers
 - Synopsys Designware MIPI DSI host bridge driver
 - STM32 DSI controller driver
 - OTM800A and RM68200 panel support
 - DSI host updates for stm32f769 and stm32mp1 dtsi files
 - splash screen for stm32f769 and stm32mp1 boards
 - stm32 defconfig updates for display support
 -----BEGIN PGP SIGNATURE-----
 
 iGwEABECACwWIQSC4hxrSoIUVfFO0kRM6ATMmsalXAUCXaRAgw4cYWd1c3RAZGVu
 eC5kZQAKCRBM6ATMmsalXH1tAJ44kBh0X+ZD1w3pmqcWYOB1WRRDzwCfeaLy0SfQ
 H1h5bXYm5KO8Mao9Ts4=
 =73tE
 -----END PGP SIGNATURE-----

Merge tag 'video-for-2020.01' of https://gitlab.denx.de/u-boot/custodians/u-boot-video

- panel bridge support in stm32 ltdc
- DSI host uclass
- sandbox DSI host uclass test driver and DSI host test
- MIPI DSI helpers
- Synopsys Designware MIPI DSI host bridge driver
- STM32 DSI controller driver
- OTM800A and RM68200 panel support
- DSI host updates for stm32f769 and stm32mp1 dtsi files
- splash screen for stm32f769 and stm32mp1 boards
- stm32 defconfig updates for display support
2019-10-14 07:30:16 -04:00
Tom Rini
fae7948011 Merge tag 'mmc-10-10-2019' of https://gitlab.denx.de/u-boot/custodians/u-boot-mmc
- Add sdhci driver for Broadcom iProc platform
- Add a driver callback for power-cycle for mmc
- Implement host_power_cycle callback for stm32_sdmmc2
- spl: dm_mmc: Initialize only the required mmc device
2019-10-14 07:28:32 -04:00
Peng Fan
d02be21d30 i2c: imx_lpi2c: add ipg clk
The controller needs two clk, per clk and ipg clk,
so let's add ipg clk.

Signed-off-by: Peng Fan <peng.fan@nxp.com>
2019-10-14 09:31:41 +02:00
Yannick Fertré
a6bbc62cab stm32mp1: configs: update video
Update video configs to support bitmap 16bpp, 24bpp,
32bpp & RLE8.

Signed-off-by: Yannick Fertré <yannick.fertre@st.com>
2019-10-13 23:39:34 +02:00
Yannick Fertré
23f965a4c6 dm: Add a dsi host uclass
Display Serial Interface (DSI) host can usefully be modelled
as their own uclass.
DSI defines a serial bus and a communication protocol
between the host and the device (panel, bridge).

Signed-off-by: Yannick Fertré <yannick.fertre@st.com>
2019-10-13 23:34:43 +02:00
Igor Opaniuk
e2c3c2e32c colibri_imx7: remove legacy sdboot wrapper
Remove legacy sdboot wrapper as distroboot can be used instead.

Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
2019-10-13 22:49:12 +02:00
Igor Opaniuk
541bfadc70 colibri_imx6: remove legacy sdboot wrapper
Remove legacy sdboot wrapper as distroboot can be used instead.

Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
2019-10-13 22:49:12 +02:00
Igor Opaniuk
3bae9bb286 colibri-imx6ull: remove legacy sdboot wrapper
Remove legacy sdboot wrapper as distroboot can be used instead.

Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
2019-10-13 22:49:12 +02:00
Igor Opaniuk
5f1e987c8b apalis_imx6: remove legacy sdboot wrapper
Remove legacy sdboot wrapper as distroboot can be used instead.

Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
2019-10-13 22:49:12 +02:00
Ye Li
f9f42b07ff imx8qm/qxp: Set SPL TEXT base to OCRAM base
Modify the SPL TEXT base from OCRAM alias to OCRAM base 0x100000, so
we can use full OCRAM not limit to 96KB

Signed-off-by: Ye Li <ye.li@nxp.com>
Reviewed-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
2019-10-13 22:49:12 +02:00
Lukasz Majewski
5e93871305 imx: config: Update KP's TPC70 config to support SWUpdate
This patch updates envs responsible for using USB pendrive as a
SWUpdate based tool for recovery and update.

Signed-off-by: Lukasz Majewski <lukma@denx.de>
2019-10-13 22:49:12 +02:00
Lukasz Majewski
0bcb11fa1f imx: tpc70: Convert TPC70 (imx6q) board to use DM/DTS in SPL and u-boot
This patch converts the TPC70 to use driver model and device tree
description in both SPL and u-boot proper.

Notable changes (DM/DTS conversion):

- PINCTRL{_IMX6}
- DM_I2C
- enable 'regulator' and 'pmic' commands
- DM_MMC and BLK (USDHC)
- DM_ETH
- DM WDT (including SYSRESET)

Signed-off-by: Lukasz Majewski <lukma@denx.de>
2019-10-13 22:49:12 +02:00
Lukasz Majewski
309ce98fcb imx: tpc70: config: Update TPC70 config to support eMMC's boot0 SPL update
The TPC70 can boot from eMMC's boot0. This patch allows it to update
this HW partition's SPL.

Signed-off-by: Lukasz Majewski <lukma@denx.de>
2019-10-13 22:49:11 +02:00
Lukasz Majewski
a142e601f8 imx: tpc70: config: Add script commands to update u-boot and OE's wic
Signed-off-by: Lukasz Majewski <lukma@denx.de>
2019-10-13 22:49:11 +02:00
Jun Nie
7cc7c1e9db pico-imx7d: Support distro boot for FIT image case
Support distro boot for pico imx7d in FIT image case.

Signed-off-by: Jun Nie <jun.nie@linaro.org>
Tested-by: Joris Offouga <offougajoris@gmail.com>
2019-10-13 22:49:11 +02:00
Soeren Moch
954252aa35 board: tbs2910: Convert eth to driver model
So we can remove lots of legacy config code.

Signed-off-by: Soeren Moch <smoch@web.de>
2019-10-13 22:49:11 +02:00
Sjoerd Simons
6ee03c9212 mx6: mx6sabre common: Use more conventional spelling of fdtfile
Both the distro boot configuration as well as the general pxe support
standardized on fdtfile as the variable to hold the dtb filename.
Adjust to follow that such that e.g. "pxe boot" will just work.

Signed-off-by: Sjoerd Simons <sjoerd.simons@collabora.co.uk>
2019-10-13 22:49:11 +02:00
Shawn Guo
6802d7951c Add i.MX7D based Meerkat96 board support
The Meerkat96 board, based on the NXP i.MX7D SoC, is a member of
96Boards community and complies with all Consumer Edition board
specifications.

https://www.novtech.com/products/meerkat96.html
https://www.96boards.org/product/imx7-96/

The initial supported/tested devices include:
 - Debug serial
 - SD
 - USB Host (with Ethernet)

With these support, it's good enough for loading Linux Kernel from SD or
Ethernet over USB.

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Tested-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
2019-10-13 22:49:11 +02:00
Yannick Fertré
66c3724656 video: add support of MIPI DSI interface
Mipi_display.c contains a set of dsi helpers.
This file is a copy of file drm_mipi_dsi.c (linux kernel).

Signed-off-by: Yannick Fertré <yannick.fertre@st.com>
2019-10-13 21:24:47 +02:00
Yannick Fertré
7389776cda include: Add new DCS commands in the enum list
Adding new DCS commands which are specified in the
DCS 1.3 spec related to CABC.

Signed-off-by: Yannick Fertré <yannick.fertre@st.com>
2019-10-13 21:24:47 +02:00
Tom Rini
9189d6f1e9 Merge https://gitlab.denx.de/u-boot/custodians/u-boot-x86
- Remember the device being emulated for Sandbox PCI
- Update Kconfig options for FSP 1.0
- Drop RESET_BASE and RESET_SEG_SIZE that are no longer used
2019-10-12 10:52:48 -04:00
Tom Rini
0c9cc5155c Merge branch '2019-10-11-master-imports'
- Assorted cleanups
- FAT bugfixes
- mediatek platform updates
2019-10-12 10:10:59 -04:00
Jarkko Nikula
2fff0e96a6 tao3530: Fix usage of mmc rescan
Currently "bootcmd" does not work as intended but instead prints MMC usage
information and goes directly to "nandboot".

Follow what the commit 669681104d ("configs: Fix usage of mmc rescan")
does for other boards prior to support for TechNexion TAO3530 SoM was
added.

Signed-off-by: Jarkko Nikula <jarkko.nikula@bitmer.com>
2019-10-11 13:32:39 -04:00
Andrew F. Davis
87875f2528 configs: ti: Use addr_fit for run_fit environment variable
When running 'run_fit' the FIT file should have been loaded at
'addr_fit', although at this point they should be the same
use this variable instead of 'loadaddr'.

Signed-off-by: Andrew F. Davis <afd@ti.com>
2019-10-11 13:31:18 -04:00
Moses Christopher
51d4e47afa am335x, guardian: adapt guardian board to DM
- update partition table - remove env partitions
  - dts: add new interfaces (uart2, extra gpio-key)
         remove unneeded entries
         update nand timings for performance improvement
  - defconfig: adapt configurations to suit DM
               remove unneeded configs
  - am335x_guardian.h: remove mmc boot

Signed-off-by: Moses Christopher <BollavarapuMoses.Christopher@in.bosch.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
2019-10-11 13:31:18 -04:00
Ryder Lee
898cc1365c arm: dts: split mtk-reset.h into per-chip header
This follows the linux header rules to avoid conflict bitfields.

Tested-by: Frank Wunderlich <frank-w@public-files.de>
Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
2019-10-11 10:10:18 -04:00
Kursad Oney
c50d670c56 waitbit: Add the generic wait_for_bit macros for 16 and 32 bits.
wait_for_bit_le32 and wait_for_bit_le16 use the raw I/O functions
which would default to big-endian on BE systems. Create the generic
equivalents to use the native endianness.

Signed-off-by: Kursad Oney <kursad.oney@broadcom.com>
Reviewed-by: Philippe Reynes <philippe.reynes@softathome.com>
Reviewed-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2019-10-11 10:09:16 -04:00
Suman Anna
b9bb1952c9 env: ti: am65x_evm: Add env support to boot the MCU R5F rprocs
Add support to boot the MCU domain R5F Core0 remoteproc at U-boot prompt
on the AM65x EVM boards by using the 'boot_rprocs' and other env variables
defined in the common environment file k3_rproc.h, and updating the
'DEFAULT_RPROCS' macro.

The default configuration is to use the MCU R5F in Split mode, so both
the R5F Core0 and Core1 are started before loading and booting the Linux
kernel using the following firmware:
   MCU R5FSS0 Core0 (Split) : 0 /lib/firmware/am65x-mcu-r5f0_0-fw
   MCU R5FSS0 Core1 (Split) : 1 /lib/firmware/am65x-mcu-r5f0_1-fw

The MCU R5FSS was initially running the R5 SPL in LockStep mode with ATCM
disabled, and is actually shutdown to enable it to be reconfigured and
booted by either A53 U-Boot or Linux kernel in remoteproc mode and using
ATCM.

The MCU R5FSS would need to be reconfigured for Lockstep mode through
DT if a fault-tolerant/safety application were to be run on the cluster
with the DEFAULT_RPROCS macro updated to remove the Core1 firmware.

Signed-off-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2019-10-11 10:07:35 -04:00
Suman Anna
0b4ab9c9a7 env: ti: j721e-evm: Add support to boot rprocs including R5Fs and DSPs
Add support to boot some remoteprocs at U-boot prompt on the J721E EVM
boards by using the 'boot_rprocs' and other env variables defined in the
common environment file k3_rproc.h, and updating the 'DEFAULT_RPROCS'
macro.

The list of R5F cores to be started before loading and booting the Linux
kernel are as follows, and in this order:
   Main R5FSS0 (Split) Core1 : 3 /lib/firmware/j7-main-r5f0_1-fw
   Main R5FSS1 (LockStep)    : 4 /lib/firmware/j7-main-r5f1_0-fw

The MCU R5FSS0 and Main R5FSS1 are currently in LockStep mode, so the
equivalent Core1 rprocs (rproc #1 and #5) are not included. The Main
R5FSS0 Core0 (rproc #2) is already started by R5 SPL, so is not included
in the list either.

The DSP cores are started in the following order before loading and
booting the Linux kernel:
   C66_0: 6 /lib/firmware/j7-c66_0-fw
   C66_1: 7 /lib/firmware/j7-c66_1-fw
   C71_0: 8 /lib/firmware/j7-c71_0-fw

The order of the rprocs to boot can be changed at runtime if desired by
overwriting the 'rproc_fw_binaries' environment variable at U-boot prompt.

Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
Signed-off-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2019-10-11 10:07:35 -04:00
Suman Anna
bb17aaf658 env: ti: k3_rproc: Add common rproc environment variables
Add a new file include/environment/ti/k3_rproc.h that defines
common environment variables useful for booting various remote
processors from U-Boot. This file is expected to be included in
the board config files with the EXTRA_ENV_RPROC_SETTINGS added
to CONFIG_EXTRA_ENV_SETTINGS and DEFAULT_RPROCS macro overwritten
to include the actual list of processors to be booted.

The 'boot_rprocs' variable just needs to be added to the board's
bootcmd to automatically boot the processors, and runtime control
can be achieved through the 'dorprocboot' variable.

The variables are currently defined to use MMC as the boot media,
and can be expanded in the future to include other boot media.
The immediate usage is intended for K3 J721E SoCs.

Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
Signed-off-by: Suman Anna <s-anna@ti.com>
2019-10-11 10:07:35 -04:00
Lokesh Vutla
81e39fbd92 remoteproc: elf_loader: Introduce rproc_elf_get_boot_addr() api
Introduce rproc_elf_get_boot_addr() that returns the entry point of
the elf file. This api auto detects the 64/32 bit elf file and returns
the boot addr accordingly.

Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2019-10-11 10:07:34 -04:00
Lokesh Vutla
856c0ad413 remoteproc: elf_loader: Introduce a common elf loader and checker functions
Introduce a common remoteproc elf loader and checker functions that
automatically detects the 64 bit elf file or 32 bit elf file and
loads/checks the sections accordingly.

Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Reviewed-by: Fabien Dessenne <fabien.dessenne@st.com>
2019-10-11 10:07:34 -04:00
Lokesh Vutla
e3c4d6f01f remoteproc: elf-loader: Add 64 bit elf loading support
The current rproc-elf-loader supports loading of only 32 bit elf files.
Introduce support for loading of 64 bit elf files in rproc-elf-loader.

Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Reviewed-by: Fabien Dessenne <fabien.dessenne@st.com>
2019-10-11 10:07:34 -04:00
Lokesh Vutla
14d963d1b5 remoteproc: elf_loader: Always check the validity of the image before loading
rproc_elf32_load_image() rely on user to send a valid address for elf loading.
Instead do a sanity check on the address passed by user. This will help
all rproc elf users to not call sanity_check explicitly before calling
elf_loading.

Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Reviewed-by: Fabien Dessenne <fabien.dessenne@st.com>
2019-10-11 10:07:34 -04:00
Lokesh Vutla
c08eb93626 remoteproc: ops: Add elf section size as input parameter to device_to_virt api
Introduce a new parameter "size" that accepts size of the region to
remoteproc ops callback device_to_virt(). This can enforce more checks
on the region that device_to_virt() is dealing with.

Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Tested-by: Fabien Dessenne <fabien.dessenne@st.com>
Reviewed-by: Fabien Dessenne <fabien.dessenne@st.com>
2019-10-11 10:07:33 -04:00
Lokesh Vutla
240b932010 dm: core: Add a function to count the children of a device
Add a function to count the available children of a device.

Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2019-10-11 10:07:33 -04:00
Andreas Dannenberg
e413033d35 spl: ymodem: Make SPL Y-Modem loader framework accessible
Expose SPL's Y-Modem core loader function via the common SPL header
file so it can be re-used for purposes other than loading U-Boot itself.

Signed-off-by: Andreas Dannenberg <dannenberg@ti.com>
2019-10-11 10:07:33 -04:00
Simon Glass
9859dc76e7 trace: Remove the const from write functions
The write functions do actually change the contents of memory so it is not
correct to use 'const'. Remove it.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2019-10-11 17:37:19 +08:00
Simon Glass
6498fda140 sandbox: pci: Remember the device being emulated
Add a field to the PCI emulator per-device data which records which device
is being emulated. This is useful when the emulator needs to check the
device for something.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Tested-by: Bin Meng <bmeng.cn@gmail.com>
[bmeng: rebase the patch against u-boot-x86/master to get it applied cleanly]
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
2019-10-11 17:37:15 +08:00
Yann Gautier
3602a56ac6 mmc: add a driver callback for power-cycle
Some MMC peripherals require specific power cycle sequence, where some
registers need to be written between the regulator is turned off and then
back on. This is the case for the MMC IP embedded in STM32MP1 SoC.

In STM32MP157 reference manual [1], the power cycle sequence is:
1. Reset the SDMMC with the RCC.SDMMCxRST register bit. This will reset
the SDMMC to the reset state and the CPSM and DPSM to the Idle state.
2. Disable the Vcc power to the card.
3. Set the SDMMC in power-cycle state. This will make that the
SDMMC_D[7:0], SDMMC_CMD and SDMMC_CK are driven low, to prevent the card
from being supplied through the signal lines.
4. After minimum 1ms enable the Vcc power to the card.
5. After the power ramp period set the SDMMC to the power-off state for
minimum 1ms. The SDMMC_D[7:0], SDMMC_CMD and SDMMC_CK are set to
drive “1”.
6. After the 1ms delay set the SDMMC to power-on state in which the
SDMMC_CK clock will be enabled.
7. After 74 SDMMC_CK cycles the first command can be sent to the card.

The step 3. cannot be handled by the current framework implementation.
A new callback (host_power_cycle) is created, and called in
mmc_power_cycle(), after mmc_power_off().

The incorrect power cycle sequence has shown some boot failures on
STM32MP1 with some SD-cards, especially on cold boots when the input
frequency is low (<= 25MHz).
Those failures are no more seen with this correct power cycle sequence.

[1] https://www.st.com/resource/en/reference_manual/DM00327659.pdf

Signed-off-by: Yann Gautier <yann.gautier@st.com>
2019-10-10 10:59:48 +08:00
Lokesh Vutla
80f02019ee spl: dm_mmc: Initialize only the required mmc device
In SPL, all the available mmc devices gets initialized during boot.
This might not work in cases where clocks are not available for
certain mmc devices(other than boot device) and the support for
enabling device might not be ready.

Texas Instruments' K3 J721E device having a central system controller
(dmsc) is one such example falling in this category. Below is the
sequence for the failing scenario:
- ROM comes up in SD mode and loads SPL by just initialing SD card.
- SPL loads dmsc firmware from SD Card.
Since ROM has enabled SD, SPL need not enable the SD, just need
to re initialize the card. But SPL is trying to initialize other MMC
instances which are in disabled state. Since dmsc firmware is not yet
available, devices cannot be enabled. So in SPL, initialize only the
mmc device that is needed.

Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
2019-10-10 10:59:48 +08:00
Marek Vasut
110861992f ARM: socfpga: vining_fpga: Update environment
Update board environment to match the one used in deployment.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Silvio Fricke <silvio.fricke@softing.com>
Cc: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
2019-10-09 22:57:40 +02:00
Marek Vasut
94a16b8e70 ARM: socfpga: vining_fpga: Rename VINING|FPGA
The company Samtec was merged into Softing, migrate the board over to
the new name and update copyright headers.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Silvio Fricke <silvio.fricke@softing.com>
Cc: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
2019-10-09 22:54:17 +02:00
Tom Rini
44fb0d6c9f Xilinx/FPGA changes for v2020.01
FPGA:
 - Enable fpga loading on Versal
 - Minor fix
 
 Microblaze:
 - Fix LMB configurations to support initrds
 - Some other cleanups
 
 Zynq:
 - Minor config/dt changes
 - Add distro boot support for usb1 and mmc1
 - Remove Xilinx private boot commands and use only distro boot
 
 ZynqMP:
 - Kconfig cleanups, defconfig updates
 - Update some dt files
 - Add firmware driver for talking to PMUFW
 - Extend distro boot support for jtag
 - Add new IDs
 - Add system controller configurations
 - Convert code to talk firmware via mailbox or SMCs
 
 Versal:
 - Add board_late_init()
 - Add run time DT memory setup
 - Add DFU support
 - Extend distro boot support for jtag and dfu
 - Add clock driver
 - Tune mini configurations
 
 Xilinx:
 - Improve documentation (boot scripts, dt binding)
 - Enable run time initrd_high calculation
 - Define default SYS_PROMPT
 - Add zynq/zynqmp virtual defconfig
 
 Drivers:
 - Add Xilinx mailbox driver for talking to firmware
 - Clean zynq_gem for Versal
 - Move ZYNQ_HISPD_BROKEN to Kconfig
 - Wire genphy_init() in phy.c
 - Add Xilinx gii2rgmii bridge
 - Cleanup zynq_sdhci
 - dwc3 fix
 - zynq_gpio fix
 - axi_emac fix
 
 Others:
 - apalis-tk1 - clean config file
 -----BEGIN PGP SIGNATURE-----
 
 iF0EABECAB0WIQQbPNTMvXmYlBPRwx7KSWXLKUoMIQUCXZ2mcwAKCRDKSWXLKUoM
 IT/KAJ4tL49YwINqCVGd7gafWvdfC4htygCcCgr9gLnJ+LjDQkxWT/r6faIcL00=
 =OnMk
 -----END PGP SIGNATURE-----

Merge tag 'xilinx-for-v2020.01' of https://gitlab.denx.de/u-boot/custodians/u-boot-microblaze

Xilinx/FPGA changes for v2020.01

FPGA:
- Enable fpga loading on Versal
- Minor fix

Microblaze:
- Fix LMB configurations to support initrds
- Some other cleanups

Zynq:
- Minor config/dt changes
- Add distro boot support for usb1 and mmc1
- Remove Xilinx private boot commands and use only distro boot

ZynqMP:
- Kconfig cleanups, defconfig updates
- Update some dt files
- Add firmware driver for talking to PMUFW
- Extend distro boot support for jtag
- Add new IDs
- Add system controller configurations
- Convert code to talk firmware via mailbox or SMCs

Versal:
- Add board_late_init()
- Add run time DT memory setup
- Add DFU support
- Extend distro boot support for jtag and dfu
- Add clock driver
- Tune mini configurations

Xilinx:
- Improve documentation (boot scripts, dt binding)
- Enable run time initrd_high calculation
- Define default SYS_PROMPT
- Add zynq/zynqmp virtual defconfig

Drivers:
- Add Xilinx mailbox driver for talking to firmware
- Clean zynq_gem for Versal
- Move ZYNQ_HISPD_BROKEN to Kconfig
- Wire genphy_init() in phy.c
- Add Xilinx gii2rgmii bridge
- Cleanup zynq_sdhci
- dwc3 fix
- zynq_gpio fix
- axi_emac fix

Others:
- apalis-tk1 - clean config file
2019-10-09 16:22:03 -04:00
Tom Rini
eaa0bde051 u-boot-imx-20191009
-------------------
 
 Travis : https://travis-ci.org/sbabic/u-boot-imx/builds/595148532
 
 - MX6UL / ULZ
 - Toradex board
 - Allow to set OCRAM for MX6Q/D
 - MX7ULP
 - MX8: (container image, imx8mq_mek), SCU API
 - fix several board booting from SD/EMMC (cubox-i for example)
 - pico boards
 -----BEGIN PGP SIGNATURE-----
 
 iQHDBAABCgAtFiEEiZClFGvhzbUNsmAvKMTY0yrV63cFAl2dlTAPHHNiYWJpY0Bk
 ZW54LmRlAAoJECjE2NMq1et3yfgL/1b4pKCwxswK42XkPpdHN1u/v2W/PVDanl/H
 EYxlluHVFH23bLTjLvrrgQjAnZD1VQhxWq3bwCMoJ8vb9tYQ3d9vq7XADQ0WVQV+
 EfhE33fVRPRT3rEdhDKWm+y1mL8YPvYEBnr9li7qU9n1VxiwONPXxMXMqoo9/lbM
 b6lJaG5KkuK8Ofx3cYFVQeAEdsFYIJ2aXtTqsqrV9o2sjruOuG3Ux+6Ov+9O0crY
 q8MXvW6kwWkVVNriVV7Yal0pomPZfMTqft007En9Mv2FtXqMeCWZ4Xh2LtRylR7n
 ruIbo94jkPuwuZ0p/6SeiyopoG/hU/skrkJv1s8W70DOsyaunP2BsveYXEjMV2Rb
 DomotcJit9Ws6P7rOP1oI8OvxSxVN8n6mo23UviZd8MjNAmOm49BtSxVGGB+pwmr
 ufGFG4MGQ5VpCxmzh6KrJCLXpI/mhKrkBkZy58cUbus7aPv3es/jBmmtGlU3m6ka
 NlEzHOX1hpJV/lhLvxjqRhVxuXvXOA==
 =+e3p
 -----END PGP SIGNATURE-----

Merge tag 'u-boot-imx-20191009' of https://gitlab.denx.de/u-boot/custodians/u-boot-imx

u-boot-imx-20191009
-------------------

Travis : https://travis-ci.org/sbabic/u-boot-imx/builds/595148532

- MX6UL / ULZ
- Toradex board
- Allow to set OCRAM for MX6Q/D
- MX7ULP
- MX8: (container image, imx8mq_mek), SCU API
- fix several board booting from SD/EMMC (cubox-i for example)
- pico boards

[trini: display5 merged manually]
Signed-off-by: Tom Rini <trini@konsulko.com>
2019-10-09 11:44:45 -04:00
Tom Rini
8c05abad13 Merge https://gitlab.denx.de/u-boot/custodians/u-boot-marvell
- Move WATCHDOG_TIMEOUT_MSECS to Kconfig (Heiko)
2019-10-08 18:45:49 -04:00
Tom Rini
efea5a34bb Merge https://gitlab.denx.de/u-boot/custodians/u-boot-x86
- Rename existing FSP code to fsp1
- Add fsp2 directory in preparation to support FSP 2.0
- Various x86 platform codes update
- Various bug fixes and updates in dm core, sandbox and spl
2019-10-08 18:45:26 -04:00
Tom Rini
9d536fe8ae First set of u-boot-atmel features and fixes for 2020.01 cycle
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQEcBAABAgAGBQJdnCy/AAoJEB6zHgIOrC/Izp4IAJVDE0oyOYcwBoCsAqa8zvMJ
 /G815T1TGyc6674TQ+Px47t+1O9InClag576E1ttKVSZHnTqH9AW1aGdVqYFgmwu
 bbk7a/N2bSYc1ZruiH1YMzwVMTmwaIvn9cvNeBMkQ0cXBP6R7m9DsupaTG9mNsll
 7wNFF6gZCOXQEOL6hgxerxr6UM2xaQMpSqfYhfYfmHyU0S86Cr1J7dORL1MHhZ4/
 WLVuxCPpgeTwiZ0i9TerC0eH0agPQ2dmtDPAQFn+RihVS29YNDTaR+a4XVKJJ6hs
 Y/77d0JYmPSY5JgYLAdjqx+GQKKqy9kpdHJz+sXCiolDdYHmG3c+4zQzrLzkH+k=
 =Y0qG
 -----END PGP SIGNATURE-----

Merge tag 'u-boot-atmel-2020.01-a' of https://gitlab.denx.de/u-boot/custodians/u-boot-atmel

First set of u-boot-atmel features and fixes for 2020.01 cycle

The feature set includes support for two new boards from Microchip AT91:
The sama5d27_wlsom1_ek , an evaluation kit which includes the SAMA5D2
SOC packaged in a 256 MB LPDDR2 SIP, on a SOM including wireless, which
is placed on evaluation kit with sd-card, ethernet, LCD, Camera sensor,
QSPI, etc
The sam9x60ek, an evaluation kit for the new SoC based on ARM926j , the
SAM9X60 . The evaluation kit includes NAND flash, QSPI, Ethernet, Audio,
Camera sensor connector, etc.
The full support for sam9x60ek will come at a later time. There are
still missing bits regarding the clock support and power management
controller.
2019-10-08 18:43:56 -04:00
Joris Offouga
f730fdf98b pico-imx7d: fix splash logo drawing
Signed-off-by: Joris Offouga <offougajoris@gmail.com>
Reviewed-by: Otavio Salvador <otavio@ossystems.com.br>
2019-10-08 16:36:37 +02:00
Igor Opaniuk
d73c520327 apalis_imx6: use distroboot by default
Use distro_bootcmd as default bootcmd instead of legacy wrappers.

Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
Reviewed-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
2019-10-08 16:36:36 +02:00
Igor Opaniuk
848ba639dc colibri_imx6/imx7/imx8x: use distroboot by default
Use distro_bootcmd as defauult bootcmd instead of legacy wrappers.

Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
Reviewed-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
2019-10-08 16:36:36 +02:00
Peng Fan
9b15ce9193 imx: Add i.MX8MM EVK board support.
Add board and SoC dts
Add ddr training code
support SD/MMC/GPIO/PINCTRL/UART

Signed-off-by: Peng Fan <peng.fan@nxp.com>
2019-10-08 16:36:36 +02:00
Peng Fan
8619c393d8 imx: imx8mm: add clock bindings header
Import clock bindings header file from Linux 5.3.0-rc2

Signed-off-by: Peng Fan <peng.fan@nxp.com>
2019-10-08 16:36:36 +02:00
Anatolij Gustschin
0a1a45b7d6 imx: mx6ul_14x14_evk: fix link issue
Since recent splash changes common code for splashscreen logo
should be used instead of adding duplicated code under board
directories. mx6ul_9x9_evk and mx6ul_14x14_evk configurations
used old board specific logo code and do not link, fix them.

Signed-off-by: Anatolij Gustschin <agust@denx.de>
Acked-by: Peng Fan <peng.fan@nxp.com>
2019-10-08 16:36:36 +02:00
Patrick Wildt
6300dc4c61 imx: add support for i.MX7/i.MX8MQ reset controller
Add support for the reset controller that's used on the i.MX7D
and i.MX8MQ.  This will be needed to be able to assert the PCIe
reset pins.  Bindings taken from Linux, driver implementation
mostly taken from Linux and adjusted to U-Boot infrastructure.

Signed-off-by: Patrick Wildt <patrick@blueri.se>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
2019-10-08 16:36:36 +02:00
Patrick Wildt
d08a194871 imx: add support for i.MX8MQ power domain controller
Add support for the power domain controller that's used on the
i.MX8MQ.  This will be needed to be able to power on the PCIe
controller.  Bindings taken from Linux, driver implementation
taken from the i.MX8 power domain controller and adjusted for
the i.MX8M SoC.

Signed-off-by: Patrick Wildt <patrick@blueri.se>
2019-10-08 16:36:36 +02:00
Anatolij Gustschin
e4b91f085d imx: wandboard: convert FEC support to DM_ETH
Remove CONFIG_DM_ETH conversion warning to avoid board removal.

Signed-off-by: Anatolij Gustschin <agust@denx.de>
2019-10-08 16:36:36 +02:00
Lukasz Majewski
d5354f59d0 DM: WDT: Convert WDT driver to use DM/DTS (including SYSRESET)
This commit enables support for CONFIG_WDT in the U-Boot proper. Moreover,
the SYSRESET_WATCHDOG driver is used to support 'reset' command.

As SPL is not yet ready for DM conversion, the CONFIG_HW_WATCHDOG is
enabled for it. This allows the legacy SPL code to work properly.

Signed-off-by: Lukasz Majewski <lukma@denx.de>
2019-10-08 16:35:59 +02:00
Lukasz Majewski
e95b4bdd8d DM: SPI: Convert display5 to use SPI with DM/DTS (but no in SPL)
The DM/DTS support for SPI is disabled on purpose for SPL, as it is not
supported as of time of this conversion.

Signed-off-by: Lukasz Majewski <lukma@denx.de>
2019-10-08 16:35:59 +02:00
Lukasz Majewski
32e0751383 DM: eth: Switch display5 board to use DM_ETH
After this commit the display5 device would use FEC driver supporting
driver model (DM_ETH).

Signed-off-by: Lukasz Majewski <lukma@denx.de>
2019-10-08 16:35:59 +02:00
Lukasz Majewski
dac9a8f8a2 DM: I2C: Switch display5 board to use DM_I2C
After this commit the display5 device would use I2C driver supporting
driver model (DM_I2C).

The 'i2c' and 'eeprom' commands now use DM I2C drivers and initialize
on-bus devices according to device tree description.

Signed-off-by: Lukasz Majewski <lukma@denx.de>
2019-10-08 16:35:59 +02:00
Fabio Estevam
77ecf95f22 pico-imx6: Add Falcon mode
Add Falcon mode support, which allows the SPL to load and
jump to the Linux kernel directly, without the need of loading
U-Boot proper.

CONFIG_SPL_OS_BOOT=y needs to be passed in the defconfig
in order to use Falcon mode.

Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
2019-10-08 16:35:59 +02:00
Fabio Estevam
953c2500bc pico-imx6: Add splashscreen support
Add splashscreen support. Tested with the parallel
FT5x06-WVGA panel.

Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
2019-10-08 16:35:59 +02:00
Fabio Estevam
d9033f2f42 pico-imx6: Add Ethernet support
Add Ethernet support.

Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
2019-10-08 16:35:59 +02:00
Otavio Salvador
7efe52a0a7 pico-imx6: Fix bootmenu handling
We should use a common script to allow booting the U-Boot console as
fallback so we ended using a 'default_boot' and 'base_boot'
environment scripts to accomplish that.

Signed-off-by: Fabio Berton <fabio.berton@ossystems.com.br>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
2019-10-08 16:35:59 +02:00
Fabio Estevam
004eee86f1 pico-imx6: Add initial support
Add the initial support for the pico-imx6 variants.

DDR initialization is based on the TechNexion's U-Boot code.

Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Fabio Berton <fabio.berton@ossystems.com.br>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
2019-10-08 16:35:59 +02:00
Fabio Estevam
033f6ea5fa mx53loco: Fix U-Boot corruption after saving the environment
U-Boot binary has grown in such a way that it goes beyond the reserved
area for the environment variables.

Running "saveenv" causes U-Boot to hang because of this overlap.

Fix this problem by increasing the CONFIG_ENV_OFFSET size.

Also, in order to prevent this same problem in the future, use
CONFIG_BOARD_SIZE_LIMIT, which will detect the overlap in build-time.

CONFIG_BOARD_SIZE_LIMIT does not accept math expressions, so declare
CONFIG_ENV_OFFSET with its direct value instead.

Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
2019-10-08 16:35:59 +02:00
Joris Offouga
d89f0a889f configs: pico-imx7d: Convert to DM_VIDEO
This commit convert all pico-imx7d to DM_VIDEO

Signed-off-by: Joris Offouga <offougajoris@gmail.com>
2019-10-08 16:35:59 +02:00
Otavio Salvador
34ac994245 pico-imx7d: Add NYMPH baseboard support
This add the boot menu option for the NYMPH baseboard as well as a
specific config file for users which wish to use it as a pre-defined
board.

Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
2019-10-08 16:35:59 +02:00
Otavio Salvador
e82e292751 pico-imx7d: Add DWARF baseboard support
This add the boot menu option for the DWARF baseboard as well as a
specific config file for users which wish to use it as a pre-defined
board.

Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
2019-10-08 16:35:59 +02:00
Fabio Estevam
5d1ed3024a pico-imx6ul: Add LCD support
Add support for the VXT VL050-8048NT-C01 panel connected through
the 24 bit parallel LCDIF interface.

Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
2019-10-08 16:35:59 +02:00
Fabio Estevam
831824c0a7 pico-imx6ul: Increase the CONFIG_ENV_OFFSET size
U-Boot binary has grown in such a way that it goes beyond the reserved
area for the environment variables.

Running "saveenv" causes U-Boot to hang because of this overlap.

Fix this problem by increasing the CONFIG_ENV_OFFSET size.

Also, in order to prevent this same problem in the future, use
CONFIG_BOARD_SIZE_LIMIT, which will detect the overlap in build-time.

CONFIG_BOARD_SIZE_LIMIT does not accept math expressions, so declare
CONFIG_ENV_OFFSET with its direct value instead.

Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Fabio Berton <fabio.berton@ossystems.com.br>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
2019-10-08 16:35:59 +02:00
Otavio Salvador
9988001089 pico-imx6ul: Add DWARF baseboard support
This add the boot menu option for the DWARF baseboard as well as a
specific config file for users which wish to use it as a pre-defined
board.

Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
2019-10-08 16:35:59 +02:00
Peng Fan
ed2ebd8629 imx8qm: correct fdt_file
imx8qm-mek.dtb is the correct fdt file, not fsl-imx8qxp-mek.dtb

Signed-off-by: Peng Fan <peng.fan@nxp.com>
2019-10-08 16:35:59 +02:00
Peng Fan
dd7d0911e0 spl: mmc: support loading i.MX container format file
i.MX8 only support AHAB secure boot with Container format image,
we could not use FIT to support secure boot, so introduce container
support to let SPL could load container images.

Cc: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
Cc: Tien Fong Chee <tien.fong.chee@intel.com>
Cc: York Sun <york.sun@nxp.com>
Cc: Marek Vasut <marex@denx.de>
Cc: Alex Kiernan <alex.kiernan@gmail.com>
Cc: Simon Glass <sjg@chromium.org>
Cc: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
Cc: Kever Yang <kever.yang@rock-chips.com>
Cc: Heiko Schocher <hs@denx.de>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
2019-10-08 16:35:58 +02:00
Peng Fan
b152584283 imx: imx8qxp_mek: fix CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR
The first stage of flash.bin is larger than 584 * 512, so when
writting u-boot.itb, some data will be override. Enlarge the
CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR to fix boot.

Signed-off-by: Peng Fan <peng.fan@nxp.com>
2019-10-08 16:35:58 +02:00
Breno Matheus Lima
e735c62701 imx: configs: Cleanup CONFIG_SECURE_BOOT comments
Since commit 6e1f4d2652 ("arm: imx-common: add SECURE_BOOT option
to Kconfig") the SECURE_BOOT option is selected through Kconfig.

Cleanup comments in code to align with this change.

Signed-off-by: Breno Lima <breno.lima@nxp.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
2019-10-08 16:35:58 +02:00
Breno Matheus Lima
5f2fe3b93a Kconfig: Migrate CONFIG_CSF_SIZE to Kconfig
Move CONFIG_CSF_SIZE to Kconfig and define default value as 0x4000.

mx8mqevk requires 0x2000 add this configuration in imx8mq_evk_defconfig
file.

Signed-off-by: Breno Lima <breno.lima@nxp.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
2019-10-08 16:35:58 +02:00
Robert Hancock
06f5b5a5fc ARM: imx: Support larger SPL size on IMX6DQ
Previously the SPL size on all iMX6 platforms was restricted to 68KB
because the OCRAM size on iMX6SL/DL parts is only 128KB. However, the
other iMX6 variants have 256KB of OCRAM. Add an option
CONFIG_MX6_OCRAM_256KB which allows using the full size on boards which
don't need to support the SL/DL variants. This allows for an SPL size of
196KB, which makes it much easier to use configurations such as SPL with
driver model and FDT control.

Signed-off-by: Robert Hancock <hancock@sedsystems.ca>
Tested-by: Adam Ford <aford173@gmail.com> #imx6q_logic
2019-10-08 16:35:16 +02:00
Peng Fan
cda789a5b1 spl: pass args to board_return_to_bootrom
Pass spl_image and bootdev to board_return_bootrom.
i.MX8MN needs the args to let ROM to load images

Cc: Simon Glass <sjg@chromium.org>
Cc: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
Cc: Kever Yang <kever.yang@rock-chips.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2019-10-08 16:35:16 +02:00
Peng Fan
ae0760584b imx: mx6ul_14x14_evk: convert to DM_VIDEO
To support DM_VIDEO,
 Add display node for lcdif
 Drop board iomuxc settings.
 Enable DM_VIDEO

Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Anatolij Gustschin <agust@denx.de>
2019-10-08 16:33:45 +02:00
Peng Fan
1d293e6804 imx: add i.MX6ULZ board
Add i.MX6ULZ board support. the i.MX6ULZ is SW compatible
with i.MX6ULL. so most code of i.MX6ULL can be reused
by i.MX6ULZ.

Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Ye Li <ye.li@nxp.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
2019-10-08 16:33:45 +02:00
Peng Fan
281256c064 arm: dts: sync dts for i.MX6UL
Sync kernel dts for i.MX6UL from
commit <0a8ad0ffa4d8> ("Merge tag 'for-linus-5.3-ofs1' of git://git.kernel.org/pub/scm/linux/kernel/git/hubcap/linux")

Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Ye Li <ye.li@nxp.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
2019-10-08 16:33:45 +02:00
Michal Simek
a3e552b53f arm64: zynqmp: Use mailbox driver for PMUFW config loading
With new mailbox driver PMUFW configuration object can be loaded via the
same interface and there is no need to have pmu_ipc.c completely.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Luca Ceresoli <luca@lucaceresoli.net>
2019-10-08 09:55:11 +02:00
Michal Simek
b6039aad2d firmware: zynqmp: Separate function for sending message via mailbox
U-Boot running in EL3 can't use SMC that's why there is a need to talk to
PMUFW directly via mailbox. The same logic is applied to all functions
which need to talk to PMUFW that's why move this logic to separate function
to avoid code duplication.

Also SMC request ID can be composed from PM_SIP_SVC offset that's why
ZYNQMP_SIP_SVC_GET_API_VERSION macro can be removed completely.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-08 09:55:11 +02:00
Ibai Erkiaga
009ab7b93a firmware: zynqmp: create firmware header
New firmware header to place firmware specific macro and function
declarations. The patch also moves the macros defining PM operations as
well as some helper macros.

Signed-off-by: Ibai Erkiaga <ibai.erkiaga-elorza@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-08 09:55:11 +02:00
Michal Simek
8272f31036 microblaze: Setup reasonable maximum bootm len
We are far from 8MB default size. Setup 64MB for now.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-08 09:55:11 +02:00
Michal Simek
c5ba6357b3 microblaze: Enable cache by default
The whole cache code needs to be redesign to read information about cache
from DT instead of macro selection. Enable caches by default because
systems have caches on by default for Linux.

Also enable CMD_CACHE to be able to disable cache if there is any issue.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-08 09:55:11 +02:00
Michal Simek
9d877c2f54 microblaze: Move CONFIG_LMB from board file to config.h
It is common for the whole architecture that's why move it there.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-08 09:55:11 +02:00
Michal Simek
336c730150 configs: apalis-tk1: Do not define CONFIG_SYS_BOOT_RAMDISK_HIGH again
CONFIG_SYS_BOOT_RAMDISK_HIGH is already defined in
arch/arm/include/asm/config.h:10:#define CONFIG_SYS_BOOT_RAMDISK_HIGH
that's why there is no reason to define it again in board file.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-08 09:55:11 +02:00
Siva Durga Prasad Paladugu
f41e588c03 net: phy: Add gmiitorgmii converter support
This patch adds support for gmiitorgmii converter.
This converter sits between the MAC and the external phy
MAC <==> GMII2RGMII <==> RGMII_PHY.
The ethernet driver probes this bridge and this bridge driver
probes real phy driver and invokes the real phy functionalities
as requested. This bridge just needs to be configured based on
real phy negotiated speed and duplex.

Signed-off-by: Siva Durga Prasad Paladugu <siva.durga.paladugu@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-08 09:41:27 +02:00
Michal Simek
83a0e8054e ARM: zynq: Remove all Xilinx private commands
All platforms have been moved to distro boot that's why remove the rest of
configurations to have unified boot flow.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-08 09:41:27 +02:00
Michal Simek
a542a93735 ARM: zynq: Use {} around variables for qspi and nand boot cmds
Follow conventions and used {} around variables.

Fixes: 90e97ab31e ("arm: zynq: Define distro boot commnads for qspi, nand and nor")
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-08 09:41:27 +02:00
Michal Simek
90b9fcb9d4 ARM: zynq: Fix NOR boot mode
There are two typos in this command that's why it couldn't work properly.
This bootmode is almost unused from the beggining on this SoC.

Fixes: 90e97ab31e ("arm: zynq: Define distro boot commnads for qspi, nand and nor")
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-08 09:41:27 +02:00
Michal Simek
559e5a68f4 ARM: zynq: Enable USB1 as secondary boot device
Xilinx Zynq SoC has two usb controllers and both could be used as secondary
boot method.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-08 09:41:27 +02:00
Michal Simek
7712fb1ff7 ARM: zynq: Specify MMC controller number for boot sequence
Xilinx Zynq SoC has two sdhci controllers but boot is only possible from
the first one. That's why there is a need to specify controller number.
mmc1 is supposed to be secondary boot device and should be also listed in
distribution boot.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-08 09:41:27 +02:00
Ashok Reddy Soma
a85f388565 arm64: versal: Fix for OCM overwriting issue
This patch reduces the console buffer size from 2048 to 1024, thus fixes
OCM overwriting issue.

Differences are in bss section as is shown from output:
xilinx_versal_mini: all -2056 bss -2048 text -8
   u-boot: add: 0/0, grow: 0/-3 bytes: 0/-2056 (-2056)
     function                                   old     new   delta
     cli_simple_run_command                     340     332      -8
     static.lastcommand                        2049    1025   -1024
     console_buffer                            2049    1025   -1024

Better would be to use PPU RAM but this change is also aligned with changes
done in ZynqMP mini configurations.

Signed-off-by: Ashok Reddy Soma <ashok.reddy.soma@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-08 09:41:27 +02:00
Michal Simek
8567717dff ARM: zynq: Increase input buffer console size to 2k
ZynqMP and Versal is using 2k that's why aligned all platform together to
be able to use the same scripts.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-08 09:41:27 +02:00
Siva Durga Prasad Paladugu
d6d82cb0be ARM: zynq: Increase init ram size by 4K
Increase init ram size by 4K such that more stack space will be available
during initialization as the present stackspace is not sufficient if DEBUG
option is enabled and causes system hang. Increasing init ram size provides
sufficient stack space during init even if DEBUG enabled and solves the
hang issue.

Signed-off-by: Siva Durga Prasad Paladugu <siva.durga.paladugu@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-08 09:41:27 +02:00
Michal Simek
d6f48ea5ce ARM: zynq: Do not enable NETBSD support by default
This option is disable in Xilinx tree for quite a long time that's why
let's disable it in mainline. If there is anybody who requires this options
then it should be moved to Kconfig first and should be removed from this
config.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-08 09:41:27 +02:00
Siva Durga Prasad Paladugu
5d2274c00f arm64: zynqmp: Add new jtag distro boot command
This patch adds new jtag distro boot command to look for bootscript file in
DDR and execute it first incase of jtag bootmode.

Signed-off-by: Siva Durga Prasad Paladugu <siva.durga.paladugu@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-08 09:35:43 +02:00
Siva Durga Prasad Paladugu
81764f5361 arm64: zynqmp: Update scriptaddr value to 512MB
This patch updates scriptaddr value to 512MB as having it at 32MB has high
chance of script corruption incase of bigger kernel.

Be aware that 512MB is used for SPL malloc area that's why images should be
loaded after SPL (the best after u-boot relocation).

Signed-off-by: Siva Durga Prasad Paladugu <siva.durga.paladugu@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-08 09:35:43 +02:00
T Karthik Reddy
e76bc3cbc0 arm64: versal: Change boot script offset address in versal
With the current boot script offset address in qspi is being overlaped
by BOOT.BIN as it is over 90MB with fpga included. So moving the script
offset address to end of flash after "bootenv" mtd partition. Here we
are considering qspi flash size >= 128Mbytes on versal and left
512Kbytes space to save boot.scr script.

Signed-off-by: T Karthik Reddy <t.karthik.reddy@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-08 09:35:43 +02:00
T Karthik Reddy
f0c16cd6f3 arm64: versal: Add new dfu usb distro boot command
This patch adds new dfu usb distro boot command to look for bootscript
from dfu-util and runs it.

Signed-off-by: T Karthik Reddy <t.karthik.reddy@xilinx.com>
2019-10-08 09:35:43 +02:00
Siva Durga Prasad Paladugu
3d865acb70 arm64: versal: Add new jtag distro boot command
This patch adds new jtag distro boot command to look for bootscript file
in DDR and execute it first incase of jtag bootmode.
This patch also updates scriptaddr to 512MB as there is high of script
corruption incase of bigger kernel image.

Signed-off-by: Siva Durga Prasad Paladugu <siva.durga.paladugu@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-08 09:35:43 +02:00
Siva Durga Prasad Paladugu
37d53180cd arm64: versal: Define configs related to USB DFU functionality
This patch defines macros required for DFU functionality
for Xilinx Versal platform.

Signed-off-by: Siva Durga Prasad Paladugu <siva.durga.paladugu@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-08 09:35:43 +02:00
T Karthik Reddy
a69814c815 arm64: zynqmp: Set initrd_high to as high as possible
This patch is setting up the initrd_high to as high as possible by leaving
max stack size for u-boot so that bigger rootfs can also be loaded by
u-boot for booting kernel.

Signed-off-by: T Karthik Reddy <t.karthik.reddy@xilinx.com>
Signed-off-by: Siva Durga Prasad Paladugu <siva.durga.paladugu@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-08 09:11:14 +02:00
Siva Durga Prasad Paladugu
085201c246 arm64: versal: Set initrd_high to as high as possible
This patch is setting up the initrd_high to as high as possible by leaving
max stack size for u-boot so that bigger rootfs can also be loaded by
u-boot for booting kernel.

Signed-off-by: Siva Durga Prasad Paladugu <siva.durga.paladugu@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-08 09:11:14 +02:00
Siva Durga Prasad Paladugu
26e054c943 arm64: versal: fpga: Add PL bit stream load support
This patch adds PL bitstream load support for Versal platform. The PL
bitstream is loaded by making an SMC to ATF which in turn communicates
with platform firmware which configures and loads PL bitstream on to PL.

Signed-off-by: Siva Durga Prasad Paladugu <siva.durga.paladugu@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-08 09:11:14 +02:00
Tudor Ambarus
8c04ea7cad configs: sam9x60ek: Add QSPI_BOOT defines
Cope with the offsets defined at:
https://www.at91.com/linux4sam/pub/Linux4SAM/SambaSubsections/demo_nandflash_map_lnx4sam6x.png

The environment starts at 0x140000 and it's of size 0x20000.
The device tree starts at 0x180000 and it's of size 0x80000.
The zImage starts at 0x200000 and it's of size 0x600000.

Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
2019-10-08 09:16:11 +03:00
Tudor Ambarus
8ed15e4a3a board: sam9x60ek: Add NAND flash support
- EBI Chip Select Register is now in SFR,
- the pins are set to default values,
- timings are matching MT29F4G08BABWP's nand flash requirements.

Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
2019-10-08 09:16:11 +03:00
Sandeep Sheriker Mallikarjun
51422665de board: atmel: Add sam9x60ek board
Add new board SAM9X60-EK using the ARM926 SAM9X60 SoC.

Signed-off-by: Sandeep Sheriker Mallikarjun <sandeepsheriker.mallikarjun@microchip.com>
[tudor.ambarus@microchip.com:
- fix number of DRAM banks:
  One DDR2-SDRAM (W972GG6KB 2 Gbit = 16 Mbit x 16 x 8 banks]
- drop SPL related macros
- drop memtest macros
- drop CONFIG_SPI_BOOT, CONFIG_SYS_USE_DATAFLASH related macros
- drop inclusion of asm/arch/at91sam9_smc.h]
Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
2019-10-08 09:16:11 +03:00
Eugen Hristev
37bd051e92 board: atmel: sama5d27_wlsom1_ek: fix SPL OFFS on SPI
Fixes redefinition of CONFIG_SYS_SPI_U_BOOT_OFFS
This is now a Kconfig

Fixes: e40a9ba6d2d5 ("board: atmel: sama5d2_wlsom1_ek: add qspi support and qspi boot config")
Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
2019-10-08 09:16:11 +03:00
Eugen Hristev
2a09eb6340 board: atmel: sama5d2_wlsom1_ek: add qspi support and qspi boot config
Add support for qspi memory on board. Created boot support for QSPI
for both u-boot proper and SPL.

Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
2019-10-08 09:16:11 +03:00
Eugen Hristev
c721c22a03 board: atmel: sama5d2_wlsom1_ek: add SPL support
Add support for SPL for this board: DRAM initialization, PMC initialization,
MMC boot.

Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
2019-10-08 09:16:11 +03:00
Nicolas Ferre
44b5c40be3 board: atmel: add sama5d27_wlsom1_ek board
Add support for the SAMA5D27-WLSOM1-EK. It's based on the Microchip
WireLess SoM which contains the SAMa5D27 LPDDR2 2Gbits SiP.

Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
[eugen.hristev@microchip.com]: added u-boot specific dtsi and ported to 2019.10
Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
2019-10-08 09:16:11 +03:00
Simon Glass
594d272cfd dm: core: Drop fdtdec_get_pci_addr()
This function ise effectively replaced by ofnode_read_pci_addr() which
works with flat tree. Delete it to avoid code duplication.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2019-10-08 13:57:47 +08:00
Simon Glass
49a0f8cc96 x86: Move acpi_s3.h to a common location
At present this hedaer is only available on x86. To allow sandbox to use
it for testing, move it to a common location.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2019-10-08 13:57:46 +08:00
Simon Glass
59c871bca7 spl: Allow distinguishing between two phases in U-Boot
U-Boot has two distinct phases: before and after relocation. These are
commonly referred to as F (running from Flash) and R (Relocated and
running from RAM). Some drivers want to do different things in these
phases so update the SPL phase function to return a different value for
each.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2019-10-08 13:57:45 +08:00
Simon Glass
535e07846a arm: mxs: Correct CONFIG_SPL_NO_CPU_SUPPORT option
At present this is defined in Kconfig but there is a separate one in the
CONFIG whitelist. It looks like these are duplicates.

Rename the non-Kconfig one and remove it from the whitelist.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2019-10-08 13:57:45 +08:00
Simon Glass
e37d963ec8 cros_ec: Add MEC_EMI_BASE and size to the header file
Provide these values which are part of the EC interface now.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2019-10-08 13:57:44 +08:00
Simon Glass
fd42948fc9 log: Add log_nop() to avoid unused-variable warnings
If a log statement includes a variable and logging is disabled, this can
generate warnings about unused variables. Add a bit more complexity to the
macros to avoid this for the common case.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2019-10-08 13:57:44 +08:00
Simon Glass
4e8de068a3 serial: ns16550: Add a PCI device/function field
When this UART is used early in boot (before PCI is set up) it is
convenient to store the PCI BDF of the UART so that it can be manually
configured. This is useful when it is used as a debug UART, for example.

Add a new field to hold this information, so that drivers can simply use
the existing platform data.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2019-10-08 13:57:43 +08:00
Simon Glass
33c215af4b dm: pci: Add a function to read a PCI BAR
At present PCI address transaction is not supported so drivers must
manually read the correct BAR after reading the device tree info. The
ns16550 has a suitable implementation, so move this code into the core
DM support.

Note that there is no live-tree equivalent at present.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Tested-by: Bin Meng <bmeng.cn@gmail.com>
[bmeng: correct the unclear comments in test.dts]
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
2019-10-08 13:57:43 +08:00
Simon Glass
bdaa976153 pci: Correct 'specifified' and 'Plese' typos
Fix these spelling errors the header file and documentation.

Fix a small typo in the PCI documentation.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2019-10-08 13:57:42 +08:00
Simon Glass
9b69ba4a78 pci: sandbox: Move the emulators into their own node
Sandbox pci works using emulation drivers which are currently children of
the pci device:

	pci-controller {
		pci@1f,0 {
			compatible = "pci-generic";
			reg = <0xf800 0 0 0 0>;
			emul@1f,0 {
				compatible = "sandbox,swap-case";
			};
		};
	};

In this case the emulation device is attached to pci device on address
f800 (device 1f, function 0) and provides the swap-case functionality.

However this is not ideal, since every device on a PCI bus has a child
device. This is only really the case for sandbox, but we want to avoid
special-case code for sandbox.

Worse, child devices cannot be probed before their parents. This forces
us to use 'find' rather than 'get' to obtain the emulator device. In fact
the emulator devices are never probed. There is code in
sandbox_pci_emul_post_probe() which tries to track when emulators are
active, but at present this does not work.

A better approach seems to be to add a separate node elsewhere in the
device tree, an 'emulation parent'. This could be given a bogus address
(such as -1) to hide the emulators away from the 'pci' command, but it
seems better to keep it at the root node to avoid such hacks.

Then we can use a phandle to point from the device to the correct
emulator, and only on sandbox. The code to find an emulator does not
interfere with normal pci operation.

Add a new UCLASS_PCI_EMUL_PARENT uclass which allows finding an emulator
given a bus, and finding a bus given an emulator. Update the existing
device trees and the code for finding an emulator.

This brings PCI emulators more into line with I2C.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Tested-by: Bin Meng <bmeng.cn@gmail.com>
[bmeng: fix 3 typos in the commit message;
        encode bus number in the labels of swap_case_emul nodes;
        mention commit 4345998ae9 in sandbox_pci_get_emul()]
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
2019-10-08 13:57:41 +08:00
Simon Glass
37a1cf9c9c sandbox: pci: Move pci_offset_to_barnum() to pci.h
This function is useful in PCI emulators. More it into the header file to
avoid duplicating it in other drivers.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2019-10-08 13:57:40 +08:00
Simon Glass
fae2c16ede sandbox: pci: Drop the get_devfn() method
This method is not used anymore since the bus/device/function of PCI
devices can be obtained from their (parent's per-child) platform data.
Drop it.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2019-10-08 13:57:40 +08:00
Simon Glass
e5f7390458 dm: core: Add device_foreach_child()
We have a 'safe' version of this function but sometimes it is not needed.
Add a normal version too and update a few places that can use it.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2019-10-08 13:57:39 +08:00
Simon Glass
4805a7af8e dm: core: Correct the return value for uclass_find_first_device()
This function returns -ENODEV when there is no device. This is
inconsistent with other functions, such as uclass_find_next_device(),
which returns 0.

Update it and tidy up the incorrect '-1' values in the comments.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Tested-by: Bin Meng <bmeng.cn@gmail.com>
2019-10-08 13:57:38 +08:00
Simon Glass
fdeb6f7dc6 efi: Move inline functions to unconditional part of header
At present these two functions are defined in efi_loader.h but only if
CONFIG_EFI_LOADER is enabled. But these are functions that are useful to
other code, such as that which deals with Intel Handoff Blocks (HOBs).

Move these to the top of the function.

Possibly ascii2unicode() should not be an inline function, since this
might impact code size.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2019-10-08 13:54:12 +08:00
Simon Glass
8e83b76df4 spl: Add a function to determine the U-Boot phase
U-Boot is built in three phases: TPL, SPL and U-Boot proper. Sometimes
it is necessary to use different init code depending on the phase. For
example, TPL might do very basic CPU init, SPL might do a little more
and U-Boot proper might bring the CPU up to full speed and enable all
cores.

Add a function which allows easy determination of the current phase being
built.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2019-10-08 13:51:03 +08:00
Simon Glass
366291afe6 spl: Add an arch-specific hook for writing to SPL handoff
At present there is an arch-specific area in the SPL handoff area intended
for use by arch-specific code, but there is no explicit call to fill in
this data. Add a hook for this.

Also use the hook to remove the sandbox-specific test code from
write_spl_handoff().

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2019-10-08 13:51:03 +08:00
Simon Glass
7e45bb0867 mtd: spi: Add 'struct spi_flash {' to the code
At present spi_flash is defined to be spi_nor which is confusing since it
is not possible to find the 'spi_flash' by normal text search. Add a
comment to help with this.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2019-10-08 13:51:00 +08:00
Heiko Schocher
ca51ef7c0c watchdog: move WATCHDOG_TIMEOUT_MSECS to Kconfig
move WATCHDOG_TIMEOUT_MSECS to Kconfig and fix
all board defconfigs.

Signed-off-by: Heiko Schocher <hs@denx.de>
Reviewed-by: Stefan Roese <sr@denx.de>
Acked-by: Lukasz Majewski <lukma@denx.de>
Acked-by: Martyn Welch <martyn.welch@collabora.com>
Signed-off-by: Stefan Roese <sr@denx.de>
2019-10-08 07:46:38 +02:00
Patrick Wildt
f2d247df50 efi: device path for nvme
This allows our EFI API to create a device path node for NVMe
devices.  It adds the necessary device path struct, uses the
nvme namespace accessor to retrieve the id and eui64, and also
provides support for the device path text protocol.

Signed-off-by: Patrick Wildt <patrick@blueri.se>
Tested-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-10-06 16:02:37 +02:00
Patrick Wildt
c50b2883df nvme: add accessor to namespace id and eui64
This adds a function which can be used by e.g. EFI to retrieve
the namespace identifier and EUI64.  For that it adds the EUI64
to its driver internal namespace structure and copies the EUI64
during namespace identification.

Signed-off-by: Patrick Wildt <patrick@blueri.se>
Tested-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2019-10-06 16:02:37 +02:00
Ovidiu Panait
fa840f13f5 initcall.h: initcall_run_list(): Improve debug output
Existing debug output is mixed with the function name:
initcall_run_list() initcall: 25263initcall_run_list()  (relocated to 425263)

Turn it to:
initcall_run_list() initcall: 25263 (relocated to 425263)

Signed-off-by: Ovidiu Panait <ovpanait@gmail.com>
2019-10-04 12:21:23 -04:00
Tom Rini
4b0bcfa7c4 Kconfig: Migrate CONFIG_BOOTM_* options
Migrate all of the existing OS support options that are under
CONFIG_BOOTM_* to Kconfig.

Signed-off-by: Tom Rini <trini@konsulko.com>
2019-10-04 12:21:23 -04:00
Jean-Jacques Hiblot
46f0d9c46b ARM: keystone2: update the default addresses of the secure monitor
To accommodate the growth of u-boot, we need to shift the location of the
secure monitor. Moving it 64kB further.

Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
2019-10-04 12:21:23 -04:00
Tom Rini
023ff4b88d First set of u-boot-atmel fixes for 2019.10 cycle
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQEcBAABAgAGBQJdkZ36AAoJEB6zHgIOrC/IxZUH/1UvpCP8LY2Jzj9x9ZfDgmWX
 tYawDgP2jFNhOlaUXhFWC5xH2p2aF9PFKXa9vLTwaQVMeVmSYPQeG1ifX/Zm5oMb
 R6B3R40Mxq/xnWcB0J3DO6KdT90eXM4zwGGYbPkVxklpbXRRTibT+n3jXB7nnjsi
 XNB3TaYSR4vdQFfZ4WgGizsqgo+Tts47lNQdPX2X0KQe4GhOtQR21VOzRjlKeNB3
 9m4ybIgrHQ+EkayX52cAUD9/KjEOr7cvXMaM5VvEz+Xlr/goYijnU1M7nPAJW5Hc
 4pxb09TcmJJV/u1ypPew1b5Ga51BLBltedCQkko5hY2fxziC0ggz6r/I5cA8k44=
 =9UHD
 -----END PGP SIGNATURE-----

Merge tag 'u-boot-atmel-fixes-2019.10-a' of https://gitlab.denx.de/u-boot/custodians/u-boot-atmel

First set of u-boot-atmel fixes for 2019.10 cycle:

This includes only tiny cleanups on env changes related to 2019.10 new
features: removal of duplicate env settings (otherwise there may be
warnings in building..) and a small fix for flashes on Gardena smart
gateway (requires nand bad block tables).
2019-09-30 07:21:38 -04:00
Tudor Ambarus
27a5d62827 at91: configs: Drop duplication of defconfig macros
'commit a9221f3ebd ("at91, omap2plus: configs: migrate CONFIG_ENV_ to defconfigs")'
migrated CONFIG_ENV_ macros to defconfigs but did not remove the
identical redefinition of these macros in include/configs/.

Since the duplicated macros have the same value as the ones in defconfigs,
no "redefined" warnings were raised. Remove duplicated macros for all
sama5 and sam9x5ek boards.

While verifying that the removal of the macros from include/configs did
not change the same macros in defconfigs, overwrite the old defconfig by
saving them with the output from "make arch=ARM savedefconfig". This
resulted in the movement of some macros in the defconfig files.

Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
2019-09-30 09:15:23 +03:00
Pierre-Jean Texier
664689f1dc env: add missing <compiler.h> header file
Since commit af95f20 ("env: Create a new file for environment functions"),
a new header file exists.

So, this commit add a missing header file.

Fixes:

include/env.h:158:1: error: unknown type name ‘ulong’; did you mean ‘long’?
 ulong env_get_ulong(const char *name, int base, ulong default_val);
 ^~~~~
 long
include/env.h:158:49: error: unknown type name ‘ulong’; did you mean ‘long’?
 ulong env_get_ulong(const char *name, int base, ulong default_val);

Signed-off-by: Pierre-Jean Texier <pjtexier@koncepto.io>
Tested-by: Joris Offouga <offougajoris@gmail.com>
Tested-by: Heiko Schocher <hs@denx.de>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2019-09-24 17:46:13 -04:00
Tom Rini
780a17e814 - fix sunxi LCD clock divider
- fix splash logo with DM_VIDEO and CONFIG_VIDEO_LOGO
 - fix splash banner output with DM_VIDEO
 -----BEGIN PGP SIGNATURE-----
 
 iGwEABECACwWIQSC4hxrSoIUVfFO0kRM6ATMmsalXAUCXYfOAg4cYWd1c3RAZGVu
 eC5kZQAKCRBM6ATMmsalXNuvAJ9VzrhgsuLwc10A64B/UEdnVEhXSwCeM8fTzWDt
 JkN2FTYt5mImZtm52jI=
 =U0N4
 -----END PGP SIGNATURE-----

Merge tag 'fixes-for-2019.10' of https://gitlab.denx.de/u-boot/custodians/u-boot-video.git

- fix sunxi LCD clock divider
- fix splash logo with DM_VIDEO and CONFIG_VIDEO_LOGO
- fix splash banner output with DM_VIDEO
2019-09-22 16:39:01 -04:00
Tom Rini
390183b581 Pull request for UEFI sub-system for v2019.10-rc4 (5)
This patch set fixes errors in the UEFI sub-system and adds a function to
 compare u16 strings which is prerequisite for further patches.
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEEbcT5xx8ppvoGt20zxIHbvCwFGsQFAl2FpJ0ACgkQxIHbvCwF
 GsQJeQ/8Cp+wGxLlQnXHyMjEh89+7qG6XQv9P6OCwrhkg5k1Qjl7V1adDgTn6snR
 UTP0RRyMwtW7sQ5Tqk2jr5SDlRF8CZV2HZNQMebVPCm2gqiXkZYHGr3CcY6U0z8s
 UMb6PyNjEZCMtY6GgEGRsAFrGl3+eFqOFOLvTSk/Y+36vLaTXRYpn2WRLkHpattA
 rBhnqgljLZN6uf5nsQDUkrvW/s/hY4cq5QVLv1wKhH014CUrCxHlhyzkYqspEBT+
 Biwmhu/XEz2qKthghw4QyZ5zCn/iMFfLnV8cHXYbd0KP643jKWWRGR+4qW/MjfBp
 BMH+tHTEZCG7F7w6bPefjGlGeidLQFgF0nU8ZXRLcxn3K1uTnZaa4wu9ZKPT4dAj
 Ucrtf1XAXwxnDIQccJ7lxsTWf1Prp8yl53Eb0HJTcLPSeqwAudca0+dbushxRj7F
 6LUtuBgtIEkBTp5EB3Y84JyNPHwBihneD9NIlPMWud6e1jDHVshvgLDSM1hepvWf
 2oDdCm/o5PGYVC+S9DWpHno2pGhOQfxzHAewyQc11IT1/n99UthOnTNdBDRM+/9M
 0uDUHzMBZQ+l7jB9RgcK20hY2PWQ3lOP9nvrKFo3dvoXf/0Jd3ywjTkMcDrbBuYK
 IlWO2lnOpCTfpgKXD+V15hlsmXwVMk/08xgXqk14gJ//L5QbiaU=
 =SXhW
 -----END PGP SIGNATURE-----

Merge tag 'efi-2019-10-rc4-5' of https://gitlab.denx.de/u-boot/custodians/u-boot-efi

Pull request for UEFI sub-system for v2019.10-rc4 (5)

This patch set fixes errors in the UEFI sub-system and adds a function to
compare u16 strings which is prerequisite for further patches.
2019-09-21 07:31:23 -04:00
Anatolij Gustschin
ea2458c54b imx: colibri_imx6: fix splash logo drawing
Define "splashimage" variable in the default environment
to enable splash screen drawing.

Signed-off-by: Anatolij Gustschin <agust@denx.de>
2019-09-21 10:22:26 +02:00
Anatolij Gustschin
e80aa8b029 imx: icore: fix splash logo drawing
Define "splashimage" variable in the default environment
and enable BMP code. Also configure white on black for
video console.

Signed-off-by: Anatolij Gustschin <agust@denx.de>
2019-09-21 10:22:08 +02:00
Anatolij Gustschin
666973320e imx: apalis_imx6: fix splash logo drawing
Define "splashimage" variable in the default environment
to enable splash screen drawing.

Signed-off-by: Anatolij Gustschin <agust@denx.de>
2019-09-21 10:21:34 +02:00
Anatolij Gustschin
b0413fc14b imx: mx6sabresd: fix splash logo drawing
After mxc_ipuv3 DM_VIDEO conversion showing splash image
doesn't work. Fix this. Also enable white on black console
configuration as it used to be with cfb_console driver.

Signed-off-by: Anatolij Gustschin <agust@denx.de>
Reported-by: Fabio Estevam <festevam@gmail.com>
Tested-by: Fabio Estevam <festevam@gmail.com>
2019-09-21 10:20:45 +02:00
Anatolij Gustschin
b2ec22b52d imx: wandboard: fix splash logo drawing
After mxc_ipuv3 DM_VIDEO conversion showing splash image
doesn't work. Fix this. Also enable white on black console
configuration as it used to be with cfb_console driver.

Signed-off-by: Anatolij Gustschin <agust@denx.de>
2019-09-21 10:12:55 +02:00
Tom Rini
d6c7309f56 Merge tag 'u-boot-rockchip-20190920' of https://gitlab.denx.de/u-boot/custodians/u-boot-rockchip
- Fix rk3288 tinker and evb SPL boot fail
- Enable get sn from cpuid for rk3399 rockpro64 board
2019-09-20 17:43:33 -04:00
AKASHI Takahiro
f8062c963a lib: charset: add u16_str<n>cmp()
u16 version of strcmp(): u16_strncmp() works like u16_strcmp() but only
at most n characters (in u16) are compared.
This function will be used in my UEFI secure boot patch.

Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-09-20 20:09:19 +02:00
AKASHI Takahiro
23ad52fff4 efi_loader: device_path: support Sandbox's "host" devices
Sandbox's "host" devices are currently described as UCLASS_ROOT udevice
with DEV_IF_HOST block device. As the current implementation of
efi_device_path doesn't support such a type, any "host" device
on sandbox cannot be seen as a distinct object.

For example,
  => host bind 0 /foo/disk.img

  => efi devices
  Scanning disk host0...
  Found 1 disks
  Device           Device Path
  ================ ====================
  0000000015c19970 /VenHw(e61d73b9-a384-4acc-aeab-82e828f3628b)
  0000000015c19d70 /VenHw(e61d73b9-a384-4acc-aeab-82e828f3628b)

  => efi dh
  Handle           Protocols
  ================ ====================
  0000000015c19970 Device Path, Device Path To Text, Device Path Utilities, Unicode Collation 2, HII String, HII Database, HII Config Routing
  0000000015c19ba0 Driver Binding
  0000000015c19c10 Simple Text Output
  0000000015c19c80 Simple Text Input, Simple Text Input Ex
  0000000015c19d70 Block IO, Device Path, Simple File System

As you can see here, efi_root (0x0000000015c19970) and host0 device
(0x0000000015c19d70) have the same representation of device path.

This is not only inconvenient, but also confusing since two different
efi objects are associated with the same device path and
efi_dp_find_obj() will possibly return a wrong result.

Solution:
Each "host" device should be given an additional device path node
of "vendor device path" to make it distinguishable.

Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-09-20 20:09:18 +02:00
Lukasz Majewski
fd75bf7bfa kconfig: doc: Update comment regarding CONFIG_IS_ENABLED(FOO) for TPL
This patch adds some commit info for CONFIG_IS_ENABLED(FOO) when used in
TPL context.

Signed-off-by: Lukasz Majewski <lukma@denx.de>
2019-09-19 12:54:28 -04:00
Jagan Teki
07390d1c0e configs: rk3288: Increase bootm length
Increase bootm length to 64MB satisfy max gunzip
size, even other rockchip and know SoC are following
same length check.

Reported-by: Michael Trimarchi <michael@amarulasolutions.com>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2019-09-19 09:35:31 +08:00
Tom Rini
a9fa70b7b7 Merge https://gitlab.denx.de/u-boot/custodians/u-boot-fsl-qoriq
- Add emmc hs200 support
- Few bug fixes related to serdes, I2C, ethernet, etc
2019-09-16 13:13:45 -04:00
Tom Rini
0d6160a340 Merge branch 'master' of https://gitlab.denx.de/u-boot/custodians/u-boot-spi
- fix mvebu_a3700_spi clock prescale (Marek Behún)
- unmark MXS_SPI, DEPRECATED (Lukasz)
- add spi_write_then_read (Jagan)
- fix SST26* flash ICs (Eugeniy)
- fix soft_spi data abort (Christophe)
2019-09-16 13:13:12 -04:00
Eugeniy Paltsev
e0cacdcc0a mtd: spi-nor: add missing SST26* flash IC protection ops
Commit c4e8862308 (mtd: spi: Switch to new SPI NOR framework)
performs switch from previous 'spi_flash' infrastructure without
proper testing/investigations which results in a regressions for
SST26 flash series.

Add missing SST26* flash IC protection ops which were introduced
previously by
Commit 3d4fed87a5 (mtd: sf: Add support of sst26wf* flash ICs
protection ops)

Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
2019-09-16 08:09:22 +05:30
Jagan Teki
8473b32127 spi: Add spi_write_then_read
Add support for SPI synchronous write followed by read,
this is common interface call from spi-nor to spi drivers.

Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Tested-by: Adam Ford <aford173@gmail.com> #da850-evm
2019-09-16 08:09:22 +05:30
Tom Rini
6f4001315a Merge branch 'master' of git://git.denx.de/u-boot-usb
- Assorted bugfixes
2019-09-14 19:56:09 -04:00
Andrew F. Davis
76470b6929 configs: ti: Add environment support commands for FIT loading
Some parts of these commands can be reused, add them to common files.

Signed-off-by: Andrew F. Davis <afd@ti.com>
2019-09-13 11:56:30 -04:00
Adam Ford
bebe758101 ARM: omapl138_lcdk: Remove dead code
The header it littered with #ifdefs and #defines and that appear
to be legacy associations to the older da850-evm and in some cases
obsolete with either Kconfig or DM migrations.  This patch removes
these legacy references.

Signed-off-by: Adam Ford <aford173@gmail.com>
2019-09-13 11:56:08 -04:00
Tom Rini
3ee0284a16 Pull request for UEFI sub-system for v2019.10-rc4 (4)
Fixes for the EFI_FILE_PROTOCOL:
 
 * correctly iterate over directories
 * correct Unicode conversion of file names
 * parameter checks
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEEbcT5xx8ppvoGt20zxIHbvCwFGsQFAl15Uz0ACgkQxIHbvCwF
 GsQOIQ//d+EdhR6+24RnrNKashgCDDcUerDA6eSR5GeJrzEBM9GD8DNlG94P2gzY
 WGSMYl5jQ5/lCXOuW4YnqZMS19Ov1Fcb+unx35JMfXCfZSE9JrIVVBb/bXf617EM
 LCIly8P0xfGXtSBwT5vwhhVVP8A1ZC9RadKe/KsXNPIY8vZ1rU9gv6juBOySZ3q3
 WrUdHRJt+B9jNENh8APyEIEvTT6zdrtWjA5eYkVFyJEZ4+9qNOV1uaM5+gfpIAXc
 CuByGi7DXok2eXdAE6lPj4HAH99h1JQDMicNNc+9QYh6DEyNZQEzCO2irNuUfPlW
 Oji29XzaDTZlRHPjvMIuXJFtCqnXDYDaVYWVy3yHJ1x3owVBq2JfIvZAcr3LE+u7
 23SZWOJTOzya/NlzDXxxHY3PJtRzgL3MFXkOA7B9lD+gHWNju3PPIbxqqwVto5rP
 Kjnn0rllRXrOVf8X7tguYWnVqDetdiwIKx6kJwCY//VaWThsLJgA6fWYYjVezO6x
 fvs+DUQV7xIgKUHGAGIdYVbrxV3LsdI4LO8Meaxo/LRILa/Rya08Oov21UsMOfuY
 XMat2sqZ9QoJHnedjBHYrCFSdG7G02529sR+gnvgwdjGFUWErTrsiSOZBxKZdPfC
 D88b9Zsj6er4DeHtibX9+jrcrStzXbc7a4LyH6Bg1cOLvB08vGY=
 =A8Yb
 -----END PGP SIGNATURE-----

Merge tag 'efi-2019-10-rc4-4' of https://gitlab.denx.de/u-boot/custodians/u-boot-efi

Pull request for UEFI sub-system for v2019.10-rc4 (4)

Fixes for the EFI_FILE_PROTOCOL:

* correctly iterate over directories
* correct Unicode conversion of file names
* parameter checks
2019-09-12 10:35:46 -04:00
Pankaj Bansal
f002b3fa8d board/lx2160a: Fix MC firmware loading for SD boot
During boot, u-boot reads MC, DPL, DPC firmware from SD card
and copies to DDR. Update DDR addresses to which these firmwares
are copied as per memory map of these firmwares on SD-card
so that isolation between the regions of various firmwares
is maintained to avoid geting overwritten.

Signed-off-by: Pankaj Bansal <pankaj.bansal@nxp.com>
Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
2019-09-12 14:11:36 +05:30
Yinbo Zhu
6f883e501b mmc: fsl_esdhc: Add emmc hs200 support
Add eMMC hs200 mode for ls1028a, ls1012a, lx2160a.
This increases eMMC performance.
Tuning procedure is currently not supported.

Signed-off-by: Yinbo Zhu <yinbo.zhu@nxp.com>
Acked-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
2019-09-12 14:05:38 +05:30
Michal Suchanek
3437121c03 usb: Add nonblock argument to submit_int_msg
This will be used to implement non-blocking keyboard polling in case of
errors.

Signed-off-by: Michal Suchanek <msuchanek@suse.de>
2019-09-11 10:11:29 +02:00
Michal Suchanek
fdd135bf8e usb: usb_submit_int_msg -> usb_int_msg
This aligns naming with usb_bulk_msg and usb_control_msg.

Signed-off-by: Michal Suchanek <msuchanek@suse.de>
2019-09-11 10:11:29 +02:00
Tom Rini
c705fc3b40 arm: ti: Add missing "=" from previous fix
While the original patch to fix a regression in distro boot for mmc on
these platforms had the correct syntax, I broke the change while
applying.  Add back in the missing "=" here so that the syntax is
correct.

Reported-by: Andre Heider <a.heider@gmail.com>
Fixes: 27e0f3bcf0 ("arm: ti: Fix regression in distro boot for mmc")
Signed-off-by: Tom Rini <trini@konsulko.com>
2019-09-09 10:55:45 -04:00
Heinrich Schuchardt
632834ce6d efi_loader: volume name in EFI_FILE_PROTOCOL.GetInfo()
We cannot determine the volume name in U-Boot. Instead of providing a dummy
volume name in case of EFI_FILE_SYSTEM_INFO and EFI_UNSUPPORTED in case of
EFI_FILE_SYSTEM_VOLUME_LABEL consistently return an empty string.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-09-09 15:21:09 +02:00
Heinrich Schuchardt
e692ed1d56 efi_loader: EFI_FILE_PROTOCOL rev 2 stub
The UEFI specification requires to implement version 2 of the
EFI_FILE_PROTOCOL. Provide the missing functions as stubs.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-09-09 15:21:09 +02:00
Heinrich Schuchardt
87c4840610 efi_loader: eliminate inline function ascii2unicode()
ascii2unicode() can only convert characters 0x00-0x7f from UTF-8 to UTF-16.
Use utf8_utf16_strcpy() instead.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-09-09 15:21:08 +02:00
Tom Rini
40e362a9ab Merge tag 'mmc-9-6-2019' of https://gitlab.denx.de/u-boot/custodians/u-boot-mmc
Bug fixes to mmc_spi
Add Aspeed SD driver
Fix dw_mmc timeout calculation
Fix timeout values passed to mmc_wait_dat0
sdhci dt caps/mask update

[trini: Fix evb-ast2500_defconfig CONFIG_MMC line]
Signed-off-by: Tom Rini <trini@konsulko.com>
2019-09-08 21:15:13 -04:00
Tom Rini
2f760735c1 Merge branch 'master' of git://git.denx.de/u-boot-sh
- Initial DM conversion
2019-09-07 13:49:39 -04:00
Tom Rini
ba83753289 - fix mailbox status register used for polling
- fix bcm2835_sdhost to wait long enough for a transfer to complete
 - increase kernel image size from 8 MB to 64 MB on arm64
 - add support for RPi4
 - add prefixes for raspberry pi related stuff to git-mailrc
 -----BEGIN PGP SIGNATURE-----
 
 iQJGBAABCAAwFiEEiUuSfQSYnG8EMsBltDliWyzx00MFAl1yhwYSHG1icnVnZ2Vy
 QHN1c2UuY29tAAoJELQ5Ylss8dNDNE8QAIzrHZ0RYg6eMCBFzAOyFu+daxUqB1vh
 GR3Kq2ku5+cwmWDRhZjj5Y8ualFqm5/IVvIbYLpV8r5ltnHJOsLCUiNVFsyod3uY
 Np3TtTH6B1QkZAJhz+kqHUHlrNlys/+7vEv1gHdSjZ+fM3OTB+NOzA6cjPMPl1lD
 fGQBEeoddMVjA7UDyoEORrwlQTy7PK82FK5xge4S8nmTrCwGkqkapg24haQwabSd
 QvNjXte1r3g/fsQZ+tFRIZEqOrBpdqXt1sEjrDe8ICjUeRIaOs/3lJxgjk2H1ia6
 x9O7u3OJNgmjs7Y5idi5pXBNiEMKFJCInAecPg6vKkaw/CAQgoQN+8MP5jjE4Cvr
 5oN6vkbScSZ8TeSYgb9NoGZ2/YxqJv67U2+4xSLn9eWPflwy3iVIOaM8R1cOEiHy
 On9tE1JMkIEQ6DClyXlERovTnAUkfFh9Wac8UbTxqHEhcBtGzRkPSYkCRXBR6mL1
 GNh3XZEFLDAczm/nzwQSgbGqKo02siKlOJbKh5PMRA/SZXVKY0BlkpI8hmj+2ra0
 V33YjmwxS+NJdRIQJoVQVgJ8eIFdioJ6+6G3oV7btGlgbA1sJajHtm3ZZ5+080+I
 fbiy1ibUjnrWcVmPWEtY3pr6ZzcL52N8Nzj7c02yej2PS/VL2ewYj7vjmUhFOVYv
 uHKtATRqUYCz
 =hWTf
 -----END PGP SIGNATURE-----

Merge tag 'rpi-next-2019.10' of https://github.com/mbgg/u-boot

- fix mailbox status register used for polling
- fix bcm2835_sdhost to wait long enough for a transfer to complete
- increase kernel image size from 8 MB to 64 MB on arm64
- add support for RPi4
- add prefixes for raspberry pi related stuff to git-mailrc
2019-09-06 19:49:51 -04:00
Bonnans, Laurent
659f4fe3c6 rpi: increase SYS_BOOTM_LEN to 64M on ARM64
On AArch64, kernel images are not self-decompressing and easily exceed
the 8MB limit.

Signed-off-by: Laurent Bonnans <laurent.bonnans@here.com>
Signed-off-by: Matthias Brugger <mbrugger@suse.com>
2019-09-06 18:16:59 +02:00
Tom Rini
9562b20dba Merge https://gitlab.denx.de/u-boot/custodians/u-boot-samsung
- ARM: exynos5: Try to boot on mmc2 before mmc0/1
2019-09-06 08:04:28 -04:00
T Karthik Reddy
3f3d77158b dm: core: Add functions to read 64-bit dt properties
This patch adds functions dev_read_u64_default & dev_read_u64
to read unsigned 64-bit values from devicetree.

Signed-off-by: T Karthik Reddy <t.karthik.reddy@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2019-09-06 10:39:15 +08:00
Heinrich Schuchardt
d0384d5160 efi_loader: correctly render CD-ROM device path nodes
Correct the name of the partition size component in struct
efi_device_path_cdrom_path.

Render entry, start, and size when converting a CD-ROM device path node to
text.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-09-05 23:18:51 +02:00
Park, Aiden
b5b9eff26d efi_loader: Extract adding a conventional memory in separate routine
Adding a conventional memory region to the memory map may require ram_top
limitation and it can be also commonly used. Extract adding a conventional
memory to the memory map in a separate routine for generic use.

Signed-off-by: Aiden Park <aiden.park@intel.com>
Tested-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-09-05 23:18:51 +02:00
Heinrich Schuchardt
7f6d874d17 efi_loader: interrupts in simple network protocol
GetStatus() must clear the interrupt status.
Transmit() should set the TX interrupt.
Receive() should clear the RX interrupt.
Initialize() and Start() should clear the interrupt status.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-09-05 23:18:51 +02:00
Guillaume GARDET
d7441d8a9a ARM: exynos5: Try to boot on mmc2 before mmc0/1
As stated in commit a61a4a1db0 with DM_MMC,
exynos boards now enumarates external SD/MMC slot as mmc2, instead of mmc1
with legacy mode. Moving mmc2 before mmc1/0 restore the previous behavior
of trying external SD/MMC before internal slot.

Signed-off-by: Guillaume GARDET <guillaume.gardet@arm.com>

Cc: Lukasz Majewski <lukma@denx.de>
Cc: Anand Moon <linux.amoon@gmail.com>
Cc: Simon Glass <sjg@chromium.org>
Cc: Minkyu Kang <mk7.kang@samsung.com>
Reviewed-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2019-09-05 18:36:59 +09:00
Sam Protsenko
6cf8a903c5 mmc: Rename timeout parameters for clarification
It's quite hard to figure out time units for various function that have
timeout parameters. This leads to possible errors when one forgets to
convert ms to us, for example. Let's rename those parameters
correspondingly to 'timeout_us' and 'timeout_ms' to prevent such issues
further.

While at it, add time units info as comments to struct mmc fields.

This commit doesn't change the behavior, only renames parameters names.
Buildman should report no changes at all.

Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Igor Opaniuk <igor.opaniuk@gmail.com>
2019-09-05 15:27:31 +08:00
Heinrich Schuchardt
cccc05ee3b env: net: U_BOOT_ENV_CALLBACKs should not depend on CMD_NET
Some environment variables are relevant for networking. For these
U_BOOT_ENV_CALLBACKs have been defined. When the corresponding environment
variable is updated the callback updates the state of the network
sub-system.

In the UEFI subsystem we can use the network even if CONFIG_CMD_NET is not
defined.

Let the usage of the U_BOOT_ENV_CALLBACKs depend on CONFIG_NET and not on
CONFIG_CMD_NET.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2019-09-04 11:37:19 -05:00
Michael Walle
12c2a310e8 net: make net_random_ethaddr() more random
The net_random_ethaddr() tries to get some entropy from different
startup times of a board. The seed is initialized with get_timer() which
has only a granularity of milliseconds. We can do better if we use
get_ticks() which returns the raw timer ticks. Using this we have a
higher chance of getting different values at startup.

Signed-off-by: Michael Walle <michael@walle.cc>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2019-09-04 11:37:19 -05:00
Patrick Delaunay
53e3d52c6c net: dwc_et_qos: update weak function board_interface_eth_init
Align the board and driver prototype for board_interface_eth_init
to avoid execution issue (the interface_type parameter is defined
as int or phy_interface_t).

To have a generic weak function (it should be reused by other driver)
I change the prototype to use directly udevice.

This prototype is added in netdev.h to allow compilation check
and avoid warning when compiling with W=1 on file
board/st/stm32mp1/stm32mp1.c

warning: no previous prototype for 'board_interface_eth_init'\
[-Wmissing-prototypes]
     int board_interface_eth_init(int interface_type, ....
         ^~~~~~~~~~~~~~~~~~~~~~~~

Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2019-09-04 11:37:19 -05:00
Ramon Fried
3eaac6307d net: introduce packet capture support
Add support for capturing ethernet packets and storing
them in memory in PCAP(2.4) format, later to be analyzed by
any PCAP viewer software (IE. Wireshark)

This feature greatly assist debugging network issues such
as detecting dropped packets, packet corruption etc.

Signed-off-by: Ramon Fried <rfried.dev@gmail.com>
Reviewed-by: Alex Marginean <alexm.osslist@gmail.com>
Tested-by: Alex Marginean <alexm.osslist@gmail.com>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2019-09-04 11:37:19 -05:00
Rick Chen
4d0140ee1a dm: cache: Add enable and disable ops for cache uclass
Add cache enable/disable ops to the DM cache uclass driver

Signed-off-by: Rick Chen <rick@andestech.com>
Cc: KC Lin <kclin@andestech.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2019-09-03 09:31:03 +08:00
Alistair Francis
f379fa6406 sifive-fu540: config: Add mmc0 as a boot target device
Add the mmc0 device as a BOOT_TARGET_DEVICES.

Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Lukas Auer <lukas.auer@aisec.fraunhofer.de>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2019-09-03 09:30:06 +08:00
Marek Vasut
eaae4ee2bd sh: r2dplus: Switch to DM PCI driver
Add DT entry for the DM PCI driver, update board configs
and drop ad-hoc board init code for the PCI bus. Instead,
let the DM PCI driver initialize and operate the hardware.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2019-09-02 17:38:43 +02:00
Ryan Harkin
296439e0b1 Revert "vexpress64: fvp dram: add DRAM configuration"
This reverts commit fc04b92354 where the
FVP DRAM configuration was added.

Signed-off-by: Ryan Harkin <ryan.harkin@linaro.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Sudeep Holla <sudeep.holla@arm.com>
2019-08-31 09:27:19 -04:00
Tom Rini
25f32e0dff Merge https://gitlab.denx.de/u-boot/custodians/u-boot-mpc85xx
Enable DM PCI for T2080RDB, T4240RDB, T1024RDB, T1042D4RDB, P1020RDB,
P2020RDB, P2041RDB, P3041DS, P4080DS, and MPC8548CDS
2019-08-29 07:26:13 -04:00
Hou Zhiqiang
2056121d67 powerpc: MPC8548CDS: Disable legacy PCIe driver when DM_PCI is enabled
Disable legacy PCIe driver and unused PCIe macros when DM_PCI enabled.

Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
2019-08-28 13:47:47 +05:30
Hou Zhiqiang
7bf7edd423 powerpc: corenet_ds: Disable legacy PCIe driver when DM_PCI is enabled
Disable legacy PCIe driver and unused PCIe macros when DM_PCI enabled.

Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
2019-08-28 13:47:46 +05:30
Hou Zhiqiang
e617bb8d16 powerpc: P2041RDB: Disable legacy PCIe driver when DM_PCI is enabled
Disable legacy PCIe driver and unused PCIe macros when DM_PCI enabled.

Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
2019-08-28 13:47:46 +05:30
Hou Zhiqiang
c1e486e81a powerpc: p1_p2_rdb: Disable legacy PCIe driver when DM_PCI is enabled
Disable legacy PCIe driver and unused PCIe macros when DM_PCI enabled
for P1020, P1021, P1024, P1025 and P2020 RDB boards.

Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
2019-08-28 13:47:46 +05:30
Hou Zhiqiang
75974847be powerpc: T104xRDB: Disable legacy PCIe driver when DM_PCI is enabled
Disable legacy PCIe driver and unused PCIe macros when DM_PCI enabled.

Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
2019-08-28 13:47:45 +05:30
Hou Zhiqiang
f9abe6dd17 powerpc: T102xRDB: Disable legacy PCIe driver when DM_PCI is enabled
Disable legacy PCIe driver and unused PCIe macros when DM_PCI enabled.

Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
2019-08-28 13:47:45 +05:30
Hou Zhiqiang
233044dd3e powerpc: T102xRDB: Remove the useless macro CONFIG_ARCH_T1040
Remove the macro CONFIG_ARCH_T1040 from the T102xRDB.h and
the PCIE4 related macros, as there are only 3 PCIe controllers
on T102x SoCs.

Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
2019-08-28 13:47:45 +05:30
Hou Zhiqiang
75a9137ddc powerpc: T4240RDB: Disable legacy PCIe driver when DM_PCI is enabled
Disable legacy PCIe driver and unused PCIe macros when DM_PCI enabled.

Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
2019-08-28 13:47:45 +05:30
Hou Zhiqiang
d85fa79d7b powerpc: T208xRDB: Disable legacy PCIe driver when DM_PCI is enabled
Disable legacy PCIe driver and unused PCIe macros when DM_PCI enabled.

Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
2019-08-28 13:47:44 +05:30
Tom Rini
8c56ea5c1e Merge branch 'u-boot-stm32_20190827' of https://gitlab.denx.de/u-boot/custodians/u-boot-stm
- Fixes and update related to STM32MP1 platforms
2019-08-27 13:19:47 -04:00
Tom Rini
e4b8dd9b34 Merge https://gitlab.denx.de/u-boot/custodians/u-boot-mpc85xx
Support of device tree model for T2080RDB, T4240RDB, T1024RDB,
T1042D4RDB, P1020RDB, P2020RDB, P2041RDB, P3041DS, P4080DS, P5040DS and
MPC8548CDS. Also support of  i2c dm model.
2019-08-27 07:11:37 -04:00
Patrick Delaunay
e7fabe75ae image: add new "copro" image type
Define new image type for coprocessor images.
It is used in FIT to identify the files loaded
with remoteproc command (elf or bin).

Signed-off-by: Loic Pallardy <loic.pallardy@st.com>
Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2019-08-27 11:19:23 +02:00
Patrick Delaunay
234a60244c pmu: stpmic1: change specific NVM api to MISC
Use MISC u-class to export the NVM register (starting at 0xF8 offset)
and avoid specific API.
- SHADOW have offset < 0.
- NVM have register > 0

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-08-27 11:19:23 +02:00
Patrick Delaunay
64dbd40218 serial: stm32: remove unused include
The "serial_stm32.h" is only used by drivers/serial/serial_stm32.c
and it is the file ./drivers/serial/serial_stm32.h

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-08-27 11:19:23 +02:00
Patrice Chotard
53b95a3456 stm32mp1: configs: Set bootdelay to 1
This allows to display splashcreen without waiting
an extra delay of 2 seconds due to default value of bootdelay.

Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-08-27 09:36:56 +02:00
Patrick Delaunay
f95f98c8df stm32mp1: configs: add altbootcmd
Add altbootcmad as it is used for
- bootcountlimit
- in mach-stm32mp/cpu.c for BOOT_RECOVERY mode

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-08-27 09:36:56 +02:00
Patrick Delaunay
6a9a34ff48 stm32mp1: configs: support MTDPARTS only if needed
MTD is only use if NAND or NOR driver is activated.

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-08-27 09:36:56 +02:00
Patrick Delaunay
3ef4aca893 stm32mp1: configs: remove CONFIG_SYS_HZ
Use the default value from lib/Kconfig.

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-08-27 09:36:56 +02:00
Patrick Delaunay
178a415534 stpmic1: program pmic to keep only the debug unit on
Depending on backup register value, we maintain the debug unit
powered-on for debugging purpose.
Only BUCK1 is required for powering the debug unit, so revert
the setting for all the other power lanes, except BUCK3 that
has to be always on.

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-08-27 09:36:56 +02:00
Patrick Delaunay
4953f6c84d stm32mp1: cosmetic: remove comment
Remove unnecessary comment.

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-08-27 09:36:56 +02:00
Tom Rini
12277acda0 Merge branch '2019-08-26-master-imports'
- Assorted minor bugfixes
2019-08-26 17:45:20 -04:00
Hou Zhiqiang
7bb72855b3 powerpc: mpc8548cds: extend the reserved length for monitor
Extend the reserved length for monitor to fix the following
build error:

BINMAN  u-boot-with-dtb.bin
Wrote map file './image.map' to show errors
binman: Section '/binman': contents size 0x80000 (524288)
exceeds section size 0x40000 (262144)
Makefile:1373: recipe for target 'u-boot-with-dtb.bin' failed
make: *** [u-boot-with-dtb.bin] Error 1

Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com>
Reviewed-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
2019-08-26 21:33:45 +05:30
Heinrich Schuchardt
44de15d686 tools: remove easylogo and include/video_logo.h
include/video_logo.h once was created via the tool easylogo and than used
in cpu/mpc8xx/video.c to display Tux. video_logo.h has been replaced by
include/linux_logo.h and is not needed anymore.

Delete the include and the tool,

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-08-26 11:46:30 -04:00
Adam Ford
9fcea65bca ARM: am3517-evm: Disable CONFIG_USB_EHCI_OMAP in SPL
Found accidentally in omap3_logic, CONFIG_USB_EHCI_OMAP adds some
code size to SPL, so this patch disables it on the am3517-evm to
reduce the code a bit since it's tight for space.

Signed-off-by: Adam Ford <aford173@gmail.com>
2019-08-26 11:46:30 -04:00
Adam Ford
97605d3ca3 ARM: omap3_logic: Fix SPL boot failure when EHCI enabled
Some of the USB code is still being built into SPL even when the
SPL menu options have it explicitly disabled for SPL. Unit there is
a better solution, This patch undefines CONFIG_USB_EHCI_OMAP when
building SPL which reduces the code and lets the board boot again.

Fixes: 25e4ff45b1 ("ARM: omap3_logic: Enable OMAP EHCI support
for SOM-LV Boards")

Signed-off-by: Adam Ford <aford173@gmail.com>
2019-08-26 11:46:27 -04:00
Sudeep Holla
208bdaf2ae vexpress/aemv8a: drop CONFIG_ARMV8_SWITCH_TO_EL1
To support KVM, we need to drop at EL2 and not EL1 before we boot Linux
kernel. This causes issues on platform with VHE and secondaries booting
at EL2 via TF-A PSCI CPU_ON call.

Cc: Ryan Harkin <ryan.harkin@linaro.org>
Cc: Liviu Dudau <liviu.dudau@foss.arm.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: David Feng <fenghua@phytium.com.cn>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
2019-08-26 11:46:27 -04:00
Nuno Gonçalves
27e0f3bcf0 arm: ti: Fix regression in distro boot for mmc
When devnum was changed to a local variable in distro_bootcmd we ran
into a problem on TI platforms (confirmed on Beaglebone) as we had been
using 'setenv devnum' there as well and it needs to match the other
usage.

Fixes: 13dd6665ed ("distro: not taint environment variables if possible")
[trini: Review other platforms, re-word commit message]
Signed-off-by: Tom Rini <trini@konsulko.com>
2019-08-26 11:43:53 -04:00
Tom Rini
7a4b0bc5fe Merge https://gitlab.denx.de/u-boot/custodians/u-boot-riscv
- Support SPL and OpenSBI (FW_DYNAMIC firmware) boot.
- Fix qemu kconfig build warning.
2019-08-26 09:50:46 -04:00
Lukas Auer
e456a81935 riscv: qemu: add SPL configuration
Add two new configurations (qemu-riscv{32,64}_spl_defconfig) with SPL
enabled for RISC-V QEMU. QEMU does not require SPL to run U-Boot. The
configurations are meant to help the development of SPL on RISC-V.

The configurations enable RAM as the only SPL boot device. Images must
be loaded at address 0x80200000. In the default boot flow, U-Boot SPL
starts in machine mode, loads the OpenSBI FW_DYNAMIC firmware and U-Boot
proper from the supplied FIT image, and starts OpenSBI. U-Boot proper is
then started in supervisor mode by OpenSBI.

Signed-off-by: Lukas Auer <lukas.auer@aisec.fraunhofer.de>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Tested-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
2019-08-26 16:07:42 +08:00
Lukas Auer
5e30e45c83 spl: support booting via RISC-V OpenSBI
RISC-V OpenSBI is an open-source implementation of the RISC-V Supervisor
Binary Interface (SBI) specification. It is required by Linux and U-Boot
running in supervisor mode. This patch adds support for booting via the
OpenSBI FW_DYNAMIC firmware. It supports OpenSBI version 0.4 and higher.

In this configuration, U-Boot SPL starts in machine mode. After loading
OpenSBI and U-Boot proper, it will start OpenSBI. All necessary
parameters are generated by U-Boot SPL and are passed to OpenSBI. U-Boot
proper is started in supervisor mode by OpenSBI. Support for OpenSBI is
enabled with CONFIG_SPL_OPENSBI. An additional configuration entry,
CONFIG_SPL_OPENSBI_LOAD_ADDR, is used to specify the load address of the
OpenSBI firmware binary. It is not used directly in U-Boot and instead
is intended to make the value available to scripts such as FIT
configuration generators.

The header file include/opensbi.h is based on header files from the
OpenSBI project. They are recent, as of commit bae54f764570 ("firmware:
Add fw_dynamic firmware").

Signed-off-by: Lukas Auer <lukas.auer@aisec.fraunhofer.de>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Tested-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
2019-08-26 16:07:42 +08:00