Commit graph

35284 commits

Author SHA1 Message Date
Wenyou Yang
4245701ef5 arm: at91/spl: mpddrc: use IP version to check configuration
To remove the unnecessary #ifdef-endif, use the mpddrc IP version
to check whether or not the interleaved decoding type is supported.

Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com>
Reviewed-by: Andreas Bießmann <andreas.devel@googlemail.com>
2016-02-02 11:49:12 +01:00
Wenyou Yang
c2ad76c4bd arm: at91/spl: mpddrc: add mpddrc DDR3-SDRAM initialization
The DDR3-SDRAM initialization sequence is implemented in
accordance with the DDR3-SRAM/DDR3L-SDRAM initialization section
described in the SAMA5D2 datasheet.

Add registers and definitions of mpddrc controller, which is used
to support DDR3 devices.

Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com>
Reviewed-by: Andreas Bießmann <andreas.devel@googlemail.com>
2016-02-02 11:49:12 +01:00
Wenyou Yang
7e8702a00f arm: at91/spl: mpddrc: add struct atmel_mpddrc_config
Add struct atmel_mpddrc_config to accommodate the mpddrc register
configurations, not using the mpddrc register map structure,
struct atmel_mpddrc, in order to increase readability and reduce
run-time memory use.

Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com>
Reviewed-by: Andreas Bießmann <andreas.devel@googlemail.com>
2016-02-02 11:49:11 +01:00
Josh Wu
258b21fc69 atmel_nand: Add 32 bit ecc support for sama5d2 chip
Also if minimum ecc requirment is bigger then what we support, then just
use our maxium pmecc support.
But it is not safe, so we'll output a warning about this.

Signed-off-by: Josh Wu <josh.wu@atmel.com>
Acked-by: Scott Wood <scottwood@freescale.com>
Reviewed-by: Andreas Bießmann <andreas.devel@googlemail.com>
2016-02-02 11:49:11 +01:00
Josh Wu
fa651f5d53 atmel_nand_ecc: update pmecc registers according to sama5d2 chip
1. add the pmecc register mapping for sama5d2.
2. add the pmecc error location register mapping for sama5d2.
3. add some new field that is different from old ip.
4. add sama5d2 pmecc ip version number.

Signed-off-by: Josh Wu <josh.wu@atmel.com>
Reviewed-by: Andreas Bießmann <andreas.devel@googlemail.com>
2016-02-02 11:49:10 +01:00
Josh Wu
422b49e289 atmel_nand: use the definition: PMECC_OOB_RESERVED_BYTES instead magic number
As atmel_nand_ecc.h is sync with v4.1 kernel, which adds the
PMECC_OOB_RESERVED_BYTES. So use it in the driver.

Signed-off-by: Josh Wu <josh.wu@atmel.com>
Reviewed-by: Andreas Bießmann <andreas.devel@googlemail.com>
Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com>
2016-01-27 13:58:59 +01:00
Josh Wu
4c6a6ea3e1 atmel_nand: add '\n' in the end of error message for better display
Also align the open parenthesis.

Signed-off-by: Josh Wu <josh.wu@atmel.com>
Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com>
Reviewed-by: Andreas Bießmann <andreas.devel@googlemail.com>
2016-01-27 13:58:59 +01:00
Josh Wu
3a20567199 atmel_nand: use nand ecc_{strength, step}_ds instead of our own function
Since ecc_{strength,step}_ds is introduced in nand_chip structure for
minimum ecc requirements. So we can use them directly and remove our
own get_onfi_ecc_param function.

Signed-off-by: Josh Wu <josh.wu@atmel.com>
Reviewed-by: Andreas Bießmann <andreas.devel@googlemail.com>
Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com>
2016-01-27 13:58:58 +01:00
Gregory CLEMENT
75b03cf14c net: macb: Not all the GEM are gigabit capable
During the initialization of PHY the gigabit bit capable is set if the
controller is a GEM. However, for sama5d2 and sama5d4, the GEM is
configured to support only 10/100.

Improperly setting the GBE capability leads to an unresponsive MAC
controller. This patch fixes this behavior allowing using the gmac with
these SoCs.

Suggested-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
Reviewed-by: Andreas Bießmann <andreas.devel@googlemail.com>
[fixed minor checkpatch warning]
Signed-off-by: Andreas Bießmann <andreas.devel@googlemail.com>
2016-01-27 13:58:58 +01:00
Gregory CLEMENT
b4670a0c2b mmc: atmel: Properly fix clock configuration
Timing issue occurs on eMMC not only when modifying the frequency but
also for all the switch command(CMD6). According to the MMC spec waiting
8 clocks after a switch command would be the thing to do.

This patch allows fixing CPU hang observed when trying to changing the
bus width on a eMMC on SAMA5D4.

Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Tested-by: Marek Vasut <marex@denx.de> # on DENX MA5D4EV
Acked-by: Marek Vasut <marex@denx.de>
Tested-by: Andreas Bießmann <andreas.devel@googlemail.com> # on atngw100
Acked-by: Andreas Bießmann <andreas.devel@googlemail.com>
[fixed minor checkpatch warning]
Signed-off-by: Andreas Bießmann <andreas.devel@googlemail.com>
2016-01-27 13:58:58 +01:00
Tom Rini
9e4de7fd4a Merge branch 'master' of http://git.denx.de/u-boot-sunxi 2016-01-26 17:45:37 -05:00
Hans de Goede
2ca0299579 mvtwsi: Fix breakage introduced by "Fix mvtwsi not working on sun6i and newer sunxi SoCs"
"Fix mvtwsi not working on sun6i and newer sunxi SoCs" includes the following:

@@ -189,7 +200,8 @@ static int twsi_start(struct i2c_adapter *adap, int expected_status)
 	/* globally set TWSIEN in case it was not */
 	twsi_control_flags |= MVTWSI_CONTROL_TWSIEN;
 	/* assert START */
-	writel(twsi_control_flags | MVTWSI_CONTROL_START, &twsi->control);
+	twsi_control_flags |= MVTWSI_CONTROL_START | MVTWSI_CONTROL_CLEAR_IFLG;
+	writel(twsi_control_flags, &twsi->control);
 	/* wait for controller to process START */
 	return twsi_wait(adap, expected_status);
 }

The modification of twsi_control_flags done here was introduced while
merging to fix a line > 80 chars, but twsi_control_flags is a global variable
and should not be modified like this here, this commit fixes this, restoring
mvtwsi functionality.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2016-01-26 17:58:02 +01:00
Hans de Goede
54be0f0578 sunxi: Bananapro: Set LDO4 to 2.5V
According to the Bananapro schematic VDD25-SATA either comes from a
dedicated WL2003E25-5 LTO, or it is connected to LDO4 via a
0 Ohm resistor.

In practice it seems that LDO4 is used, so enable it and set it to 2.5V.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2016-01-26 16:20:05 +01:00
Chen-Yu Tsai
f3c5045a95 sunxi: power: axp818: Enable support for ALDOs
Previously, AXP818 ALDO support was partially added to Kconfig, but
never enabled in the board file, nor properly set or configured in
Kconfig. The boards continue to work because the AXP818 is designed
to pair with the A83T/H8, and the default voltages match the reference
design's requirements.

Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Acked-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2016-01-26 16:20:05 +01:00
Chen-Yu Tsai
f7b4fff3f0 sunxi: h8_homlet_v2: Drop LDO settings from defconfig
The LDO settings in this defconfig are either wrong (ALDOs must not be 0)
or the same as Kconfig defaults.

Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Acked-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2016-01-26 16:20:05 +01:00
Chen-Yu Tsai
0509efb7e9 power: axp818: Add support for DLDO and ELDO regulators
AXP818 provides an array of LDOs to provide power to various peripherals.
None of these regulators are critical.

Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Acked-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2016-01-26 16:20:05 +01:00
Chen-Yu Tsai
3517a27ddb power: axp: merge separate DLDO functions into 1
Instead of one function for each DLDO regulator, make 1 function that
takes an extra "index". Since the control bits for the DLDO regulators
are contiguous, this makes the function very simple. This removes a lot
of duplicate code.

Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Acked-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2016-01-26 16:20:05 +01:00
Chen-Yu Tsai
c2caf65da5 power: axp818: Remove duplicate register definition macros
Some of the register definitions are duplicated. Drop them.

Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Acked-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2016-01-26 16:20:05 +01:00
Vishnu Patekar
cd7aa27bec sunxi: Add suport for A83T based Banana-pi M3 Board
Add dts and defconfig for Banana-pi M3 board.

It has 2G LPDDR3, UART, ethernet, USB, HDMI, USB Sata, MIPI DSI,
mic, AP6212 Wifi, etc on it.
It is paired with AXP813 PMIC which is almost same as AXP818.

Signed-off-by: Vishnu Patekar <vishnupatekar0510@gmail.com>
[hdegoede@redhat.com: rename to Sinovoip_BPI_M3_defconfig/sun8i-a83t-sinovoip-bpi-m3.dts]
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2016-01-26 16:20:05 +01:00
Vishnu Patekar
f3ad64c88c sunxi: Add support for LPDDR3 for A83T
Banana-pi M3 has LPDDR3 DRAM. this adds support for LPDDR3 for A83T.
Mostly the timing parameters are different from DDR3.

Signed-off-by: Vishnu Patekar <vishnupatekar0510@gmail.com>
Acked-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2016-01-26 16:20:05 +01:00
Vishnu Patekar
f5fd8caf7f sunxi: Groundwork to support new dram type for A83T
Different A83T boards have different DRAM types. Banapi M3 has LPDDR3,
Allwinner Homlet v1.2 has DDR3.

This adds groundwork to support for new DRAM type for A83T.

Introduce CONFIG_DRAM_TYPE, It'll be 3 for DDR3 and 7 for LPDDR3, must
be set in respective board defconfig.

Signed-off-by: Vishnu Patekar <vishnupatekar0510@gmail.com>
Acked-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2016-01-26 16:20:05 +01:00
Vishnu Patekar
627b380f62 sunxi: Redundant code cleanup from a83t dram init
This removes the redundant lines of code from mctl_sys_init.

Signed-off-by: Vishnu Patekar <vishnupatekar0510@gmail.com>
Acked-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2016-01-26 16:20:05 +01:00
Chen-Yu Tsai
853f6d1ef8 sunxi: Enable booting non-secure and virtualization for H3
Now that we support PSCI and various security switches, we can let
U-boot boot Linux into non-secure and HYP mode.

Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Acked-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2016-01-26 16:20:05 +01:00
Chen-Yu Tsai
9683945179 sunxi: Support PSCI ops on Allwinner H3
H3 has the same power sequencing procedure as the A31/A31s, which
includes the power clamps.

Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Acked-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2016-01-26 16:20:05 +01:00
Chen-Yu Tsai
ed80584f30 sunxi: Support H3 CCU security switches
H3's CCU includes some switches which disable non-secure access to some
of the more critical clock controls, such as MBUS, PLLs, and main
platform busses.

Configure them to enable non-secure access.

For now the only SoC that has this feature is the H3. For other
platforms just use a default (weak) empty function so things do
not break.

Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Acked-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2016-01-26 16:20:05 +01:00
Chen-Yu Tsai
5823664fb8 sunxi: Support Secure Memory Touch Arbiter (SMTA) in sun8i H3
Secure Memory Touch Arbiter is the same thing as the TrustZone
Protection Controller found on A31/A31s.

Access to many peripherals on the H3 can be controlled by the SMTA,
and the settings default to secure access only.

This patch supports the new settings, and sets them to allow non-secure
access.

Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Acked-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2016-01-26 16:20:04 +01:00
Hans de Goede
fe4b71b237 sunxi: Implement poweroff support for axp221 pmic
Adds poweroff support for axp221 pmic.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Ian Campbell <ijc@hellion.org.uk>
2016-01-26 16:20:04 +01:00
Michael van Slingerland
467e92b357 sunxi: Implement poweroff support for axp209 pmic
Adds poweroff support for axp209 pmic.

Signed-off-by: Michael van Slingerland <michael@deviousops.nl>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Ian Campbell <ijc@hellion.org.uk>
2016-01-26 16:20:04 +01:00
Hans de Goede
c286cdfe14 sunxi: Implement poweroff support for axp152 pmic
Adds poweroff support for axp152 pmic.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Ian Campbell <ijc@hellion.org.uk>
2016-01-26 16:20:04 +01:00
Tom Rini
b72ae192e3 Merge branch 'master' of git://git.denx.de/u-boot-video 2016-01-26 09:48:07 -05:00
Anatolij Gustschin
7588c31252 video: add CONFIG_I2C_EDID and disable CONFIG_DISPLAY by default
Enabling CONFIG_DISPLAY breaks building for some architectures
(microblaze-generic), so we disable CONFIG_DISPLAY in Kconfig
by default and enable this option in defconfigs. CONFIG_DISPLAY
depends on CONFIG_I2C_EDID, so add and enable it in defconfigs, too.

Signed-off-by: Anatolij Gustschin <agust@denx.de>
Reported-by: Bin Meng <bmeng.cn@gmail.com>
Cc: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Tested-by: Bin Meng <bmeng.cn@gmail.com>
Signed-off-by: Anatolij Gustschin <agust@denx.de>
2016-01-26 08:06:13 +01:00
Tom Rini
d6ea6d8876 mips: asm/io.h: Add in <linux/bug.h>
As part of the bug.h / BUILD_BUG_* clean up, this file was missed.

Signed-off-by: Tom Rini <trini@konsulko.com>
2016-01-25 18:52:23 -05:00
Tom Rini
9c3193f8d0 Merge branch 'master' of git://git.denx.de/u-boot-usb 2016-01-25 17:23:19 -05:00
Tom Rini
d82477748d Merge branch 'master' of git://git.denx.de/u-boot-mpc85xx 2016-01-25 16:45:00 -05:00
Marek Vasut
bdbcbe752e usb: kbd: Prevent out of bound access
Scan code 0x39 is CapsLock, which is not a printable character and thus
is not covered by either usb_kbd_numkey_shifted[] or usb_kbd_numkey[].
Fix the scan code check to avoid looking it up in either of the arrays.

Signed-off-by: Marek Vasut <marex@denx.de>
2016-01-25 22:00:46 +01:00
Masahiro Yamada
4feefdcfe9 usb: add clock support for generic EHCI
This driver is designed in a generic manner, so clocks should be
handled genericly as well.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2016-01-25 21:50:10 +01:00
Ying Zhang
2f66a828f7 powerpc/board/t4240rdb: Enable VID support
The fuse status register provides the values from on-chip
voltage ID efuses programmed at the factory. These values
define the voltage requirements for the chip. u-boot reads
FUSESR and translates the values into the appropriate
commands to set the voltage output value of an external
voltage regulator.

Signed-off-by: Ying Zhang <b40530@freescale.com>
Reviewed-by: York Sun <york.sun@nxp.com>
2016-01-25 12:38:05 -08:00
Ying Zhang
cabe4d2f19 board/freescale/common: Check IR chip mode for VID support
IR chip on all the boards are required to be used in Intel mode
to support VID. VDD will not be adjusted if IR chip is used in
other modes.

Signed-off-by: Ying Zhang <b40530@freescale.com>
Reviewed-by: York Sun <york.sun@nxp.com>
2016-01-25 12:37:03 -08:00
Ashish kumar
43381474ff arch/powperpc: Fix start_align due to use of __ffs64() instead ffs64()
Incorrect DDR law was created in case of B4860qds after commit
2d2f490d. Return value of ffs64() differs from __ffs64(), eg.
    ffs64(0x80000000) = 0x20
    __ffs64(0x80000000) = 0x1f
As a result of this change, callers need to adjust the expected
return value by removing -1.

Signed-off-by: Ashish Kumar <Ashish.Kumar@nxp.com>
Reviewed-by: York Sun <york.sun@nxp.com>
2016-01-25 12:30:31 -08:00
Prabhakar Kushwaha
2c0d69713c powerpc: mpc85xx: Move set_liodns, setup_portals to common boot seq
Users migrating Freescale's PowerPC SoC U-Boot code to their custom
board, often overlook the need to execute set_liodns() and
setup_portals() being called by platform files.

So Move set_liodns() and setup_portals() to common u-boot boot
sequence

Signed-off-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
Reviewed-by: York Sun <york.sun@nxp.com>
2016-01-25 12:13:31 -08:00
Stephen Warren
ac01603da4 checkpatch: ignore request to use ether_addr_copy()
The Linux kernel, from which checkpatch originates, contains function
ether_addr_copy() to copy Ethernet MAC addresses, and checkpatch warns
that it should be used in preference to memcpy() where appropriate.
U-Boot doesn't contain ether_addr_copy(), so tell checkpatch not to issue
this warning.

Signed-off-by: Stephen Warren <swarren@nvidia.com>
Reviewed-by: Marek Vasut <marex@denx.de>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
Tested-by: Anand Moon <linux.amoon@gmail.com>
Reviewed-by: Anand Moon <linux.amoon@gmail.com>
2016-01-25 11:17:52 -05:00
Tom Rini
2218c54bc1 Merge branch 'master' of git://git.denx.de/u-boot-imx 2016-01-25 10:40:38 -05:00
Thomas Chou
cc4228f9d6 ns16550: zap the rockchip serial compatible string
Zap the rockchip serial compatible string, because rockchip
serial has "snps,dw-apb-uart" compatible string in the dts.

Signed-off-by: Thomas Chou <thomas@wytron.com.tw>
Acked-by: Simon Glass <sjg@chromium.org>
2016-01-25 10:40:04 -05:00
Thomas Chou
75219d57ef ns16550: replace with binding files from Linux kernel
Replace ns16550.txt with binding files from Linux kernel. As suggested
by Stephen Warren, we should keep the directory structure, filenames,
and file content identical to the bindings in the Linux kernel.

Signed-off-by: Thomas Chou <thomas@wytron.com.tw>
Acked-by: Stephen Warren <swarren@nvidia.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2016-01-25 10:40:03 -05:00
Adam Ford
b99353b8ac OMAP: Define CONFIG_OMAP3_GPIO_6 on omap3_logic
Since we are manipulating GPIO 189 to determine the board type, we
need to enable the GPIO Bank 6.

Signed-off-by: Adam Ford <aford173@gmail.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
2016-01-25 10:40:02 -05:00
Ladislav Michl
a994d8396f igep00x0: remove #undef CONFIG_BOOTDELAY
Do not undefine CONFIG_BOOTDELAY, so board can boot without user
intervention.

Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
Acked-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
2016-01-25 10:40:02 -05:00
Bin Meng
81b0b0d93b openrisc: Fix build errors
With kernel.org toolchain, it reports:

  CC      arch/openrisc/lib/board.o
  arch/openrisc/lib/board.c:56:2: error: 'console_init_f' undeclared here (not in a function)
  arch/openrisc/lib/board.c: In function 'board_init':
  arch/openrisc/lib/board.c:120:2: warning: implicit declaration of function 'console_init_r'
  make[1]: *** [arch/openrisc/lib/board.o] Error 1
  make: *** [arch/openrisc/lib] Error 2

Include console.h will fix this.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
2016-01-25 10:40:01 -05:00
Bin Meng
e6655d7c23 net: eepro100: Fix build warnings
When building katmai, it reports quite a lot

  warning: cast to pointer from integer of different size [-Wint-to-pointer-cast]

Fix this by casting the dev->iobase with u_long.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2016-01-25 10:40:01 -05:00
Bin Meng
4019e54dc6 powerpc: tqm834x: Fix build warnings in initdram()
With gcc 4.9, it produces the following warnings:

  CC      board/tqc/tqm834x/tqm834x.o
  board/tqc/tqm834x/tqm834x.c: In function 'initdram':
  board/tqc/tqm834x/tqm834x.c:325:12: warning: iteration 3u invokes undefined behavior [-Waggressive-loop-optimizations]
      (((base + size - 1) >> CSBNDS_EA_SHIFT) &
              ^
  board/tqc/tqm834x/tqm834x.c:80:2: note: containing loop
      for(cs = 0; cs < 4; ++cs) {
      ^

There is an integer overflow when cs = 3. To fix it, change
parameters of set_cs_bounds() to ulong.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
2016-01-25 10:40:00 -05:00
Bin Meng
b3ce90815c sh: sh7753evb: Fix build error
Currently buildman fails to build sh7753evb and reports the following:

  board/renesas/sh7753evb/built-in.o: In function 'init_gether_mdio':
  board/renesas/sh7753evb/sh7753evb.c:94: undefined reference to 'PMB_ADDR_BASE'
  board/renesas/sh7753evb/sh7753evb.c:94: undefined reference to 'PMB_DATA_BASE'
  board/renesas/sh7753evb/sh7753evb.c:94: undefined reference to 'mk_pmb_addr_val'
  board/renesas/sh7753evb/sh7753evb.c:94: undefined reference to 'mk_pmb_data_val'
  make: *** [u-boot] Error 1

The fix is to wrap any codes that access these macros with CONFIG_SH_32BIT.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
2016-01-25 10:40:00 -05:00