Mirrors/u-boot
2
0
Fork 0
mirror of https://github.com/AsahiLinux/u-boot synced 2024-12-24 12:03:39 +00:00
Code Issues Projects Releases Packages Wiki Activity
u-boot/arch/powerpc/cpu/mpc83xx/Kconfig

207 lines
4.1 KiB
Text
Raw Normal View History

kconfig: add board Kconfig and defconfig files This commit adds: - arch/${ARCH}/Kconfig provide a menu to select target boards - board/${VENDOR}/${BOARD}/Kconfig or board/${BOARD}/Kconfig set CONFIG macros to the appropriate values for each board - configs/${TARGET_BOARD}_defconfig default setting of each board (This commit was automatically generated by a conversion script based on boards.cfg) In Linux Kernel, defconfig files are located under arch/${ARCH}/configs/ directory. It works in Linux Kernel since ARCH is always given from the command line for cross compile. But in U-Boot, ARCH is not given from the command line. Which means we cannot know ARCH until the board configuration is done. That is why all the "*_defconfig" files should be gathered into a single directory ./configs/. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Acked-by: Simon Glass <sjg@chromium.org>
2014-07-30 05:08:14 +00:00
menu "mpc83xx CPU"
depends on MPC83xx
config SYS_CPU
default "mpc83xx"
choice
prompt "Target select"
arch: Make board selection choices optional By making the board selections optional, every defconfig will include the board selection when running savedefconfig so if a new board is added to the top of the list of choices the former top's defconfig will still be correct. Signed-off-by: Joe Hershberger <joe.hershberger@ni.com> Cc: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: Stephen Warren <swarren@wwwdotorg.org> Cc: Tom Rini <trini@konsulko.com>
2015-05-12 19:46:23 +00:00
optional
kconfig: add board Kconfig and defconfig files This commit adds: - arch/${ARCH}/Kconfig provide a menu to select target boards - board/${VENDOR}/${BOARD}/Kconfig or board/${BOARD}/Kconfig set CONFIG macros to the appropriate values for each board - configs/${TARGET_BOARD}_defconfig default setting of each board (This commit was automatically generated by a conversion script based on boards.cfg) In Linux Kernel, defconfig files are located under arch/${ARCH}/configs/ directory. It works in Linux Kernel since ARCH is always given from the command line for cross compile. But in U-Boot, ARCH is not given from the command line. Which means we cannot know ARCH until the board configuration is done. That is why all the "*_defconfig" files should be gathered into a single directory ./configs/. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Acked-by: Simon Glass <sjg@chromium.org>
2014-07-30 05:08:14 +00:00
config TARGET_MPC837XERDB
bool "Support MPC837XERDB"
mpc83xx: Introduce ARCH_MPC837X Replace CONFIG_MPC837x with a proper CONFIG_ARCH_MPC837X Kconfig option. Signed-off-by: Mario Six <mario.six@gdsys.cc>
2019-01-21 08:17:29 +00:00
select ARCH_MPC837X
Convert CONFIG_BOARD_EARLY_INIT_F to Kconfig This converts the following to Kconfig: CONFIG_BOARD_EARLY_INIT_F Signed-off-by: Simon Glass <sjg@chromium.org>
2017-01-23 20:31:20 +00:00
select BOARD_EARLY_INIT_F
kconfig: add board Kconfig and defconfig files This commit adds: - arch/${ARCH}/Kconfig provide a menu to select target boards - board/${VENDOR}/${BOARD}/Kconfig or board/${BOARD}/Kconfig set CONFIG macros to the appropriate values for each board - configs/${TARGET_BOARD}_defconfig default setting of each board (This commit was automatically generated by a conversion script based on boards.cfg) In Linux Kernel, defconfig files are located under arch/${ARCH}/configs/ directory. It works in Linux Kernel since ARCH is always given from the command line for cross compile. But in U-Boot, ARCH is not given from the command line. Which means we cannot know ARCH until the board configuration is done. That is why all the "*_defconfig" files should be gathered into a single directory ./configs/. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Acked-by: Simon Glass <sjg@chromium.org>
2014-07-30 05:08:14 +00:00
config TARGET_IDS8313
bool "Support ids8313"
mpc83xx: Introduce ARCH_MPC831* Replace CONFIG_MPC833* with proper CONFIG_ARCH_MPC833* Kconfig options. Signed-off-by: Mario Six <mario.six@gdsys.cc>
2019-01-21 08:17:25 +00:00
select ARCH_MPC8313
powerpc: ids8313: use "select" instead of default value in defconfig Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: Simon Glass <sjg@chromium.org>
2015-03-31 03:48:03 +00:00
select DM
dm: Change CMD_DM enabling CMD_DM is used for debug purpose and it shouldn't be enabled by default via Kconfig. Unfortunately this is in the tree for quite a long time that's why solution is to use imply DM for all targets which are enabling DM. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Joe Hershberger <joe.hershberger@ni.com>
2018-07-23 13:55:14 +00:00
imply CMD_DM
kconfig: add board Kconfig and defconfig files This commit adds: - arch/${ARCH}/Kconfig provide a menu to select target boards - board/${VENDOR}/${BOARD}/Kconfig or board/${BOARD}/Kconfig set CONFIG macros to the appropriate values for each board - configs/${TARGET_BOARD}_defconfig default setting of each board (This commit was automatically generated by a conversion script based on boards.cfg) In Linux Kernel, defconfig files are located under arch/${ARCH}/configs/ directory. It works in Linux Kernel since ARCH is always given from the command line for cross compile. But in U-Boot, ARCH is not given from the command line. Which means we cannot know ARCH until the board configuration is done. That is why all the "*_defconfig" files should be gathered into a single directory ./configs/. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Acked-by: Simon Glass <sjg@chromium.org>
2014-07-30 05:08:14 +00:00
keymile: Make distinct kmeter1, and kmcoge5ne configs The kmeter1, and kmcoge5ne boards also build from the same config file with #ifdef logic. Create a separate include config for each board with the #ifdef logic resolved as needed. Signed-off-by: Mario Six <mario.six@gdsys.cc>
2019-01-21 08:17:35 +00:00
config TARGET_KMETER1
bool "Support kmeter1"
km: modify Kconfig file organization for KM boards As preparation for the upcoming transferring of configurations from header files to Kconfig, a common Kconfig file for all KM boards was created. For the moment, it only sources the other three, more specific, Kconfig files. Therefore, the architecture Kconfig files now include the common Kconfig file. Also, the configuration selection for KM boards was moved from the architecture Kconfig files to the board specific Kconfig files. Signed-off-by: Pascal Linder <pascal.linder@edu.hefr.ch> Signed-off-by: Holger Brunck <holger.brunck@ch.abb.com> Cc: Mario Six <mario.six@gdsys.cc> Cc: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com> Signed-off-by: Stefan Roese <sr@denx.de>
2019-06-18 11:27:47 +00:00
select VENDOR_KM
mpc83xx, keymile boards: enable DM_ETH and add DTS enable DTS support for keymile mpc83xx based boards. get rid of compile warning: ===================== WARNING ====================== This board does not use CONFIG_DM_ETH (Driver Model for Ethernet drivers). Please update the board to use CONFIG_DM_ETH before the v2020.07 release. Failure to update by the deadline may result in board removal. See doc/driver-model/migration.rst for more info. ==================================================== Therefore done: - add DTS for all mpc83xx based boards from keymile mainly they are not mainlined to linux. - add u-boot specific dtsi - add stdout-path - add missing ucc4 par_io definitions, which were in board code, but not in linux DTS - remove not used ethernet nodes Signed-off-by: Heiko Schocher <hs@denx.de> Patch-cc: Mario Six <mario.six@gdsys.cc> Patch-cc: Qiang Zhao <qiang.zhao@nxp.com> Series-to: u-boot Series-version: 3 Series-changes: 3 - rebase patchset to current mainline commit c0192950df - update defconfig files Series-changes: 2 - add patch which fixes Codingstyle errors in drivers/qe - add patch which converts the mpc83xx based boards from keymile to DM_ETH Cover-letter: powerpc, mpc83xx: add DM_ETH support This patch series adds DM ethernet support for mpc83xx based keymile boards. Travis build: END
2020-02-03 06:43:57 +00:00
select KM_ENABLE_FULL_DM_DTS_SUPPORT
keymile: Make distinct kmeter1, and kmcoge5ne configs The kmeter1, and kmcoge5ne boards also build from the same config file with #ifdef logic. Create a separate include config for each board with the #ifdef logic resolved as needed. Signed-off-by: Mario Six <mario.six@gdsys.cc>
2019-01-21 08:17:35 +00:00
config TARGET_KMCOGE5NE
bool "Support kmcoge5ne"
km: modify Kconfig file organization for KM boards As preparation for the upcoming transferring of configurations from header files to Kconfig, a common Kconfig file for all KM boards was created. For the moment, it only sources the other three, more specific, Kconfig files. Therefore, the architecture Kconfig files now include the common Kconfig file. Also, the configuration selection for KM boards was moved from the architecture Kconfig files to the board specific Kconfig files. Signed-off-by: Pascal Linder <pascal.linder@edu.hefr.ch> Signed-off-by: Holger Brunck <holger.brunck@ch.abb.com> Cc: Mario Six <mario.six@gdsys.cc> Cc: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com> Signed-off-by: Stefan Roese <sr@denx.de>
2019-06-18 11:27:47 +00:00
select VENDOR_KM
mpc83xx, keymile boards: enable DM_ETH and add DTS enable DTS support for keymile mpc83xx based boards. get rid of compile warning: ===================== WARNING ====================== This board does not use CONFIG_DM_ETH (Driver Model for Ethernet drivers). Please update the board to use CONFIG_DM_ETH before the v2020.07 release. Failure to update by the deadline may result in board removal. See doc/driver-model/migration.rst for more info. ==================================================== Therefore done: - add DTS for all mpc83xx based boards from keymile mainly they are not mainlined to linux. - add u-boot specific dtsi - add stdout-path - add missing ucc4 par_io definitions, which were in board code, but not in linux DTS - remove not used ethernet nodes Signed-off-by: Heiko Schocher <hs@denx.de> Patch-cc: Mario Six <mario.six@gdsys.cc> Patch-cc: Qiang Zhao <qiang.zhao@nxp.com> Series-to: u-boot Series-version: 3 Series-changes: 3 - rebase patchset to current mainline commit c0192950df - update defconfig files Series-changes: 2 - add patch which fixes Codingstyle errors in drivers/qe - add patch which converts the mpc83xx based boards from keymile to DM_ETH Cover-letter: powerpc, mpc83xx: add DM_ETH support This patch series adds DM ethernet support for mpc83xx based keymile boards. Travis build: END
2020-02-03 06:43:57 +00:00
select KM_ENABLE_FULL_DM_DTS_SUPPORT
kconfig: add board Kconfig and defconfig files This commit adds: - arch/${ARCH}/Kconfig provide a menu to select target boards - board/${VENDOR}/${BOARD}/Kconfig or board/${BOARD}/Kconfig set CONFIG macros to the appropriate values for each board - configs/${TARGET_BOARD}_defconfig default setting of each board (This commit was automatically generated by a conversion script based on boards.cfg) In Linux Kernel, defconfig files are located under arch/${ARCH}/configs/ directory. It works in Linux Kernel since ARCH is always given from the command line for cross compile. But in U-Boot, ARCH is not given from the command line. Which means we cannot know ARCH until the board configuration is done. That is why all the "*_defconfig" files should be gathered into a single directory ./configs/. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Acked-by: Simon Glass <sjg@chromium.org>
2014-07-30 05:08:14 +00:00
keymile: Make distinct kmtegr1, kmvect1, suvd3 configs The kmtegr1, kmvect1, and suvd3 boards all use the same config include file with lots of #ifdefs in it. The Kconfig migation will become easier if we get rid of these #ifdefs first. Hence, create distinct config include files for these boards, and unwind the #ifdef logic in these config files to only include the options necessary for each board. Signed-off-by: Mario Six <mario.six@gdsys.cc>
2019-01-21 08:17:30 +00:00
config TARGET_KMTEGR1
bool "Support kmtegr1"
km: modify Kconfig file organization for KM boards As preparation for the upcoming transferring of configurations from header files to Kconfig, a common Kconfig file for all KM boards was created. For the moment, it only sources the other three, more specific, Kconfig files. Therefore, the architecture Kconfig files now include the common Kconfig file. Also, the configuration selection for KM boards was moved from the architecture Kconfig files to the board specific Kconfig files. Signed-off-by: Pascal Linder <pascal.linder@edu.hefr.ch> Signed-off-by: Holger Brunck <holger.brunck@ch.abb.com> Cc: Mario Six <mario.six@gdsys.cc> Cc: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com> Signed-off-by: Stefan Roese <sr@denx.de>
2019-06-18 11:27:47 +00:00
select VENDOR_KM
mpc83xx, keymile boards: enable DM_ETH and add DTS enable DTS support for keymile mpc83xx based boards. get rid of compile warning: ===================== WARNING ====================== This board does not use CONFIG_DM_ETH (Driver Model for Ethernet drivers). Please update the board to use CONFIG_DM_ETH before the v2020.07 release. Failure to update by the deadline may result in board removal. See doc/driver-model/migration.rst for more info. ==================================================== Therefore done: - add DTS for all mpc83xx based boards from keymile mainly they are not mainlined to linux. - add u-boot specific dtsi - add stdout-path - add missing ucc4 par_io definitions, which were in board code, but not in linux DTS - remove not used ethernet nodes Signed-off-by: Heiko Schocher <hs@denx.de> Patch-cc: Mario Six <mario.six@gdsys.cc> Patch-cc: Qiang Zhao <qiang.zhao@nxp.com> Series-to: u-boot Series-version: 3 Series-changes: 3 - rebase patchset to current mainline commit c0192950df - update defconfig files Series-changes: 2 - add patch which fixes Codingstyle errors in drivers/qe - add patch which converts the mpc83xx based boards from keymile to DM_ETH Cover-letter: powerpc, mpc83xx: add DM_ETH support This patch series adds DM ethernet support for mpc83xx based keymile boards. Travis build: END
2020-02-03 06:43:57 +00:00
select KM_ENABLE_FULL_DM_DTS_SUPPORT
kconfig: add board Kconfig and defconfig files This commit adds: - arch/${ARCH}/Kconfig provide a menu to select target boards - board/${VENDOR}/${BOARD}/Kconfig or board/${BOARD}/Kconfig set CONFIG macros to the appropriate values for each board - configs/${TARGET_BOARD}_defconfig default setting of each board (This commit was automatically generated by a conversion script based on boards.cfg) In Linux Kernel, defconfig files are located under arch/${ARCH}/configs/ directory. It works in Linux Kernel since ARCH is always given from the command line for cross compile. But in U-Boot, ARCH is not given from the command line. Which means we cannot know ARCH until the board configuration is done. That is why all the "*_defconfig" files should be gathered into a single directory ./configs/. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Acked-by: Simon Glass <sjg@chromium.org>
2014-07-30 05:08:14 +00:00
config TARGET_TUXX1
bool "Support tuxx1"
km: modify Kconfig file organization for KM boards As preparation for the upcoming transferring of configurations from header files to Kconfig, a common Kconfig file for all KM boards was created. For the moment, it only sources the other three, more specific, Kconfig files. Therefore, the architecture Kconfig files now include the common Kconfig file. Also, the configuration selection for KM boards was moved from the architecture Kconfig files to the board specific Kconfig files. Signed-off-by: Pascal Linder <pascal.linder@edu.hefr.ch> Signed-off-by: Holger Brunck <holger.brunck@ch.abb.com> Cc: Mario Six <mario.six@gdsys.cc> Cc: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com> Signed-off-by: Stefan Roese <sr@denx.de>
2019-06-18 11:27:47 +00:00
select VENDOR_KM
mpc83xx, keymile boards: enable DM_ETH and add DTS enable DTS support for keymile mpc83xx based boards. get rid of compile warning: ===================== WARNING ====================== This board does not use CONFIG_DM_ETH (Driver Model for Ethernet drivers). Please update the board to use CONFIG_DM_ETH before the v2020.07 release. Failure to update by the deadline may result in board removal. See doc/driver-model/migration.rst for more info. ==================================================== Therefore done: - add DTS for all mpc83xx based boards from keymile mainly they are not mainlined to linux. - add u-boot specific dtsi - add stdout-path - add missing ucc4 par_io definitions, which were in board code, but not in linux DTS - remove not used ethernet nodes Signed-off-by: Heiko Schocher <hs@denx.de> Patch-cc: Mario Six <mario.six@gdsys.cc> Patch-cc: Qiang Zhao <qiang.zhao@nxp.com> Series-to: u-boot Series-version: 3 Series-changes: 3 - rebase patchset to current mainline commit c0192950df - update defconfig files Series-changes: 2 - add patch which fixes Codingstyle errors in drivers/qe - add patch which converts the mpc83xx based boards from keymile to DM_ETH Cover-letter: powerpc, mpc83xx: add DM_ETH support This patch series adds DM ethernet support for mpc83xx based keymile boards. Travis build: END
2020-02-03 06:43:57 +00:00
select KM_ENABLE_FULL_DM_DTS_SUPPORT
kconfig: add board Kconfig and defconfig files This commit adds: - arch/${ARCH}/Kconfig provide a menu to select target boards - board/${VENDOR}/${BOARD}/Kconfig or board/${BOARD}/Kconfig set CONFIG macros to the appropriate values for each board - configs/${TARGET_BOARD}_defconfig default setting of each board (This commit was automatically generated by a conversion script based on boards.cfg) In Linux Kernel, defconfig files are located under arch/${ARCH}/configs/ directory. It works in Linux Kernel since ARCH is always given from the command line for cross compile. But in U-Boot, ARCH is not given from the command line. Which means we cannot know ARCH until the board configuration is done. That is why all the "*_defconfig" files should be gathered into a single directory ./configs/. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Acked-by: Simon Glass <sjg@chromium.org>
2014-07-30 05:08:14 +00:00
keymile: Make distinct kmsupx5, tuge1, kmopti2, and kmtepr2 configs The kmsupx5, tuge1, kmopti2, and kmtepr2 boards all build from the same include config file with lots of #ifdef logic. To ease Kconfig migration, create new config include files for these boards, and resolve the #ifdef logic as needed. Signed-off-by: Mario Six <mario.six@gdsys.cc>
2019-01-21 08:17:33 +00:00
config TARGET_KMSUPX5
bool "Support kmsupx5"
km: modify Kconfig file organization for KM boards As preparation for the upcoming transferring of configurations from header files to Kconfig, a common Kconfig file for all KM boards was created. For the moment, it only sources the other three, more specific, Kconfig files. Therefore, the architecture Kconfig files now include the common Kconfig file. Also, the configuration selection for KM boards was moved from the architecture Kconfig files to the board specific Kconfig files. Signed-off-by: Pascal Linder <pascal.linder@edu.hefr.ch> Signed-off-by: Holger Brunck <holger.brunck@ch.abb.com> Cc: Mario Six <mario.six@gdsys.cc> Cc: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com> Signed-off-by: Stefan Roese <sr@denx.de>
2019-06-18 11:27:47 +00:00
select VENDOR_KM
mpc83xx, keymile boards: enable DM_ETH and add DTS enable DTS support for keymile mpc83xx based boards. get rid of compile warning: ===================== WARNING ====================== This board does not use CONFIG_DM_ETH (Driver Model for Ethernet drivers). Please update the board to use CONFIG_DM_ETH before the v2020.07 release. Failure to update by the deadline may result in board removal. See doc/driver-model/migration.rst for more info. ==================================================== Therefore done: - add DTS for all mpc83xx based boards from keymile mainly they are not mainlined to linux. - add u-boot specific dtsi - add stdout-path - add missing ucc4 par_io definitions, which were in board code, but not in linux DTS - remove not used ethernet nodes Signed-off-by: Heiko Schocher <hs@denx.de> Patch-cc: Mario Six <mario.six@gdsys.cc> Patch-cc: Qiang Zhao <qiang.zhao@nxp.com> Series-to: u-boot Series-version: 3 Series-changes: 3 - rebase patchset to current mainline commit c0192950df - update defconfig files Series-changes: 2 - add patch which fixes Codingstyle errors in drivers/qe - add patch which converts the mpc83xx based boards from keymile to DM_ETH Cover-letter: powerpc, mpc83xx: add DM_ETH support This patch series adds DM ethernet support for mpc83xx based keymile boards. Travis build: END
2020-02-03 06:43:57 +00:00
select KM_ENABLE_FULL_DM_DTS_SUPPORT
keymile: Make distinct kmsupx5, tuge1, kmopti2, and kmtepr2 configs The kmsupx5, tuge1, kmopti2, and kmtepr2 boards all build from the same include config file with lots of #ifdef logic. To ease Kconfig migration, create new config include files for these boards, and resolve the #ifdef logic as needed. Signed-off-by: Mario Six <mario.six@gdsys.cc>
2019-01-21 08:17:33 +00:00
config TARGET_TUGE1
bool "Support tuge1"
km: modify Kconfig file organization for KM boards As preparation for the upcoming transferring of configurations from header files to Kconfig, a common Kconfig file for all KM boards was created. For the moment, it only sources the other three, more specific, Kconfig files. Therefore, the architecture Kconfig files now include the common Kconfig file. Also, the configuration selection for KM boards was moved from the architecture Kconfig files to the board specific Kconfig files. Signed-off-by: Pascal Linder <pascal.linder@edu.hefr.ch> Signed-off-by: Holger Brunck <holger.brunck@ch.abb.com> Cc: Mario Six <mario.six@gdsys.cc> Cc: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com> Signed-off-by: Stefan Roese <sr@denx.de>
2019-06-18 11:27:47 +00:00
select VENDOR_KM
mpc83xx, keymile boards: enable DM_ETH and add DTS enable DTS support for keymile mpc83xx based boards. get rid of compile warning: ===================== WARNING ====================== This board does not use CONFIG_DM_ETH (Driver Model for Ethernet drivers). Please update the board to use CONFIG_DM_ETH before the v2020.07 release. Failure to update by the deadline may result in board removal. See doc/driver-model/migration.rst for more info. ==================================================== Therefore done: - add DTS for all mpc83xx based boards from keymile mainly they are not mainlined to linux. - add u-boot specific dtsi - add stdout-path - add missing ucc4 par_io definitions, which were in board code, but not in linux DTS - remove not used ethernet nodes Signed-off-by: Heiko Schocher <hs@denx.de> Patch-cc: Mario Six <mario.six@gdsys.cc> Patch-cc: Qiang Zhao <qiang.zhao@nxp.com> Series-to: u-boot Series-version: 3 Series-changes: 3 - rebase patchset to current mainline commit c0192950df - update defconfig files Series-changes: 2 - add patch which fixes Codingstyle errors in drivers/qe - add patch which converts the mpc83xx based boards from keymile to DM_ETH Cover-letter: powerpc, mpc83xx: add DM_ETH support This patch series adds DM ethernet support for mpc83xx based keymile boards. Travis build: END
2020-02-03 06:43:57 +00:00
select KM_ENABLE_FULL_DM_DTS_SUPPORT
keymile: Make distinct kmsupx5, tuge1, kmopti2, and kmtepr2 configs The kmsupx5, tuge1, kmopti2, and kmtepr2 boards all build from the same include config file with lots of #ifdef logic. To ease Kconfig migration, create new config include files for these boards, and resolve the #ifdef logic as needed. Signed-off-by: Mario Six <mario.six@gdsys.cc>
2019-01-21 08:17:33 +00:00
config TARGET_KMOPTI2
bool "Support kmopti2"
km: modify Kconfig file organization for KM boards As preparation for the upcoming transferring of configurations from header files to Kconfig, a common Kconfig file for all KM boards was created. For the moment, it only sources the other three, more specific, Kconfig files. Therefore, the architecture Kconfig files now include the common Kconfig file. Also, the configuration selection for KM boards was moved from the architecture Kconfig files to the board specific Kconfig files. Signed-off-by: Pascal Linder <pascal.linder@edu.hefr.ch> Signed-off-by: Holger Brunck <holger.brunck@ch.abb.com> Cc: Mario Six <mario.six@gdsys.cc> Cc: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com> Signed-off-by: Stefan Roese <sr@denx.de>
2019-06-18 11:27:47 +00:00
select VENDOR_KM
mpc83xx, keymile boards: enable DM_ETH and add DTS enable DTS support for keymile mpc83xx based boards. get rid of compile warning: ===================== WARNING ====================== This board does not use CONFIG_DM_ETH (Driver Model for Ethernet drivers). Please update the board to use CONFIG_DM_ETH before the v2020.07 release. Failure to update by the deadline may result in board removal. See doc/driver-model/migration.rst for more info. ==================================================== Therefore done: - add DTS for all mpc83xx based boards from keymile mainly they are not mainlined to linux. - add u-boot specific dtsi - add stdout-path - add missing ucc4 par_io definitions, which were in board code, but not in linux DTS - remove not used ethernet nodes Signed-off-by: Heiko Schocher <hs@denx.de> Patch-cc: Mario Six <mario.six@gdsys.cc> Patch-cc: Qiang Zhao <qiang.zhao@nxp.com> Series-to: u-boot Series-version: 3 Series-changes: 3 - rebase patchset to current mainline commit c0192950df - update defconfig files Series-changes: 2 - add patch which fixes Codingstyle errors in drivers/qe - add patch which converts the mpc83xx based boards from keymile to DM_ETH Cover-letter: powerpc, mpc83xx: add DM_ETH support This patch series adds DM ethernet support for mpc83xx based keymile boards. Travis build: END
2020-02-03 06:43:57 +00:00
select KM_ENABLE_FULL_DM_DTS_SUPPORT
keymile: Make distinct kmsupx5, tuge1, kmopti2, and kmtepr2 configs The kmsupx5, tuge1, kmopti2, and kmtepr2 boards all build from the same include config file with lots of #ifdef logic. To ease Kconfig migration, create new config include files for these boards, and resolve the #ifdef logic as needed. Signed-off-by: Mario Six <mario.six@gdsys.cc>
2019-01-21 08:17:33 +00:00
config TARGET_KMTEPR2
bool "Support kmtepr2"
km: modify Kconfig file organization for KM boards As preparation for the upcoming transferring of configurations from header files to Kconfig, a common Kconfig file for all KM boards was created. For the moment, it only sources the other three, more specific, Kconfig files. Therefore, the architecture Kconfig files now include the common Kconfig file. Also, the configuration selection for KM boards was moved from the architecture Kconfig files to the board specific Kconfig files. Signed-off-by: Pascal Linder <pascal.linder@edu.hefr.ch> Signed-off-by: Holger Brunck <holger.brunck@ch.abb.com> Cc: Mario Six <mario.six@gdsys.cc> Cc: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com> Signed-off-by: Stefan Roese <sr@denx.de>
2019-06-18 11:27:47 +00:00
select VENDOR_KM
mpc83xx, keymile boards: enable DM_ETH and add DTS enable DTS support for keymile mpc83xx based boards. get rid of compile warning: ===================== WARNING ====================== This board does not use CONFIG_DM_ETH (Driver Model for Ethernet drivers). Please update the board to use CONFIG_DM_ETH before the v2020.07 release. Failure to update by the deadline may result in board removal. See doc/driver-model/migration.rst for more info. ==================================================== Therefore done: - add DTS for all mpc83xx based boards from keymile mainly they are not mainlined to linux. - add u-boot specific dtsi - add stdout-path - add missing ucc4 par_io definitions, which were in board code, but not in linux DTS - remove not used ethernet nodes Signed-off-by: Heiko Schocher <hs@denx.de> Patch-cc: Mario Six <mario.six@gdsys.cc> Patch-cc: Qiang Zhao <qiang.zhao@nxp.com> Series-to: u-boot Series-version: 3 Series-changes: 3 - rebase patchset to current mainline commit c0192950df - update defconfig files Series-changes: 2 - add patch which fixes Codingstyle errors in drivers/qe - add patch which converts the mpc83xx based boards from keymile to DM_ETH Cover-letter: powerpc, mpc83xx: add DM_ETH support This patch series adds DM ethernet support for mpc83xx based keymile boards. Travis build: END
2020-02-03 06:43:57 +00:00
select KM_ENABLE_FULL_DM_DTS_SUPPORT
keymile: Make distinct kmsupx5, tuge1, kmopti2, and kmtepr2 configs The kmsupx5, tuge1, kmopti2, and kmtepr2 boards all build from the same include config file with lots of #ifdef logic. To ease Kconfig migration, create new config include files for these boards, and resolve the #ifdef logic as needed. Signed-off-by: Mario Six <mario.six@gdsys.cc>
2019-01-21 08:17:33 +00:00
mpc83xx: Add gazerbeam board The gdsys gazerbeam board is based on a Freescale MPC8308 SOC. It boots from NOR-Flash, kernel and rootfs are stored on SD-Card. On board peripherals include: - 2x 10/100 Mbit/s Ethernet (optional) Signed-off-by: Dirk Eibach <dirk.eibach@gdsys.cc> Signed-off-by: Mario Six <mario.six@gdsys.cc>
2019-03-29 09:18:19 +00:00
config TARGET_GAZERBEAM
bool "Support gazerbeam"
select ARCH_MPC8308
select SYS_FSL_ERRATUM_ESDHC111
imply ENV_IS_IN_FLASH
help
The "Gazerbeam" is a modular system by Guntermann & Drunck GmbH
Systementwicklung based on the NXP MPC8308 SoC for usage in KVM
appliances.
Features include:
* Two gigabit ethernet ports
* Multiple USB ports (depending on variant)
* Several gigabit ethernet or optical fiber ports (depending on
variant)
* Several display port inputs and outputs, and supporting redrivers
(depending on variant)
* Several FPGAs with custom logic (depending on variant)
kconfig: add board Kconfig and defconfig files This commit adds: - arch/${ARCH}/Kconfig provide a menu to select target boards - board/${VENDOR}/${BOARD}/Kconfig or board/${BOARD}/Kconfig set CONFIG macros to the appropriate values for each board - configs/${TARGET_BOARD}_defconfig default setting of each board (This commit was automatically generated by a conversion script based on boards.cfg) In Linux Kernel, defconfig files are located under arch/${ARCH}/configs/ directory. It works in Linux Kernel since ARCH is always given from the command line for cross compile. But in U-Boot, ARCH is not given from the command line. Which means we cannot know ARCH until the board configuration is done. That is why all the "*_defconfig" files should be gathered into a single directory ./configs/. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Acked-by: Simon Glass <sjg@chromium.org>
2014-07-30 05:08:14 +00:00
endchoice
mpc83xx: Kconfig: Migrate HRCW to Kconfig The HRCW (hardware reset configuration word) is a constant that must be hard-coded into the boot loader image. So, it must be available at compile time, and cannot be migrated to the DT mechanism, but has to be kept in Kconfig. Configuration of this crucial variable should still be somewhat comfortable. Hence, make its fields configurable in Kconfig, and assemble the final value from these. Signed-off-by: Mario Six <mario.six@gdsys.cc>
2019-01-21 08:17:54 +00:00
config MPC83XX_QUICC_ENGINE
bool
# TODO: Imply MPC83xx PCI driver
config MPC83XX_PCI_SUPPORT
bool
# TODO: Imply TSEC driver
config MPC83XX_TSEC1_SUPPORT
bool
config MPC83XX_TSEC2_SUPPORT
bool
config MPC83XX_PCIE1_SUPPORT
bool
config MPC83XX_PCIE2_SUPPORT
bool
config MPC83XX_SDHC_SUPPORT
bool
sata: Rename SATA_SUPPORT to SATA Rename this options so that CONFIG_IS_ENABLED can be used with it. Signed-off-by: Simon Glass <sjg@chromium.org>
2021-08-08 18:20:17 +00:00
config MPC83XX_SATA
mpc83xx: Kconfig: Migrate HRCW to Kconfig The HRCW (hardware reset configuration word) is a constant that must be hard-coded into the boot loader image. So, it must be available at compile time, and cannot be migrated to the DT mechanism, but has to be kept in Kconfig. Configuration of this crucial variable should still be somewhat comfortable. Hence, make its fields configurable in Kconfig, and assemble the final value from these. Signed-off-by: Mario Six <mario.six@gdsys.cc>
2019-01-21 08:17:54 +00:00
bool
i2c: Rename SPL/TPL_I2C_SUPPORT to I2C Rename these options so that CONFIG_IS_ENABLED can be used with them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Heiko Schocher <hs@denx.de>
2021-07-11 03:14:36 +00:00
config MPC83XX_SECOND_I2C
mpc83xx: Kconfig: Migrate HRCW to Kconfig The HRCW (hardware reset configuration word) is a constant that must be hard-coded into the boot loader image. So, it must be available at compile time, and cannot be migrated to the DT mechanism, but has to be kept in Kconfig. Configuration of this crucial variable should still be somewhat comfortable. Hence, make its fields configurable in Kconfig, and assemble the final value from these. Signed-off-by: Mario Six <mario.six@gdsys.cc>
2019-01-21 08:17:54 +00:00
bool
config MPC83XX_LDP_PIN
bool
mpc83xx: Introduce ARCH_MPC830* Replace CONFIG_MPC830* with proper CONFIG_ARCH_MPC830* Kconfig options. Signed-off-by: Mario Six <mario.six@gdsys.cc>
2019-01-21 08:17:24 +00:00
config ARCH_MPC830X
bool
mpc83xx: Kconfig: Migrate HRCW to Kconfig The HRCW (hardware reset configuration word) is a constant that must be hard-coded into the boot loader image. So, it must be available at compile time, and cannot be migrated to the DT mechanism, but has to be kept in Kconfig. Configuration of this crucial variable should still be somewhat comfortable. Hence, make its fields configurable in Kconfig, and assemble the final value from these. Signed-off-by: Mario Six <mario.six@gdsys.cc>
2019-01-21 08:17:54 +00:00
select MPC83XX_SDHC_SUPPORT
Finish converting CONFIG_SYS_CACHELINE_SIZE to Kconfig We move the SYS_CACHE_SHIFT_N options from arch/arm/Kconfig to arch/Kconfig, and introduce SYS_CACHE_SHIFT_4 to provide a size of 16. Introduce select statements for other architectures based on current usage. For MIPS, we take the existing arch-specific symbol and migrate to the generic symbol. This lets us remove a little bit of otherwise unused code. Cc: Alexey Brodkin <alexey.brodkin@synopsys.com> Cc: Anup Patel <anup.patel@wdc.com> Cc: Atish Patra <atish.patra@wdc.com> Cc: Bin Meng <bmeng.cn@gmail.com> Cc: Leo <ycliang@andestech.com> Cc: Palmer Dabbelt <palmer@dabbelt.com> Cc: Paul Walmsley <paul.walmsley@sifive.com> Cc: Sean Anderson <seanga2@gmail.com> Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com> Acked-by: Sean Anderson <seanga2@gmail.com> Reviewed-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com> Reviewed-by: Rick Chen <rick@andestech.com>
2021-08-26 15:47:59 +00:00
select SYS_CACHE_SHIFT_5
mpc83xx: Introduce ARCH_MPC830* Replace CONFIG_MPC830* with proper CONFIG_ARCH_MPC830* Kconfig options. Signed-off-by: Mario Six <mario.six@gdsys.cc>
2019-01-21 08:17:24 +00:00
config ARCH_MPC8308
bool
select ARCH_MPC830X
mpc83xx: Kconfig: Migrate HRCW to Kconfig The HRCW (hardware reset configuration word) is a constant that must be hard-coded into the boot loader image. So, it must be available at compile time, and cannot be migrated to the DT mechanism, but has to be kept in Kconfig. Configuration of this crucial variable should still be somewhat comfortable. Hence, make its fields configurable in Kconfig, and assemble the final value from these. Signed-off-by: Mario Six <mario.six@gdsys.cc>
2019-01-21 08:17:54 +00:00
select MPC83XX_TSEC1_SUPPORT
select MPC83XX_TSEC2_SUPPORT
select MPC83XX_PCIE1_SUPPORT
i2c: Rename SPL/TPL_I2C_SUPPORT to I2C Rename these options so that CONFIG_IS_ENABLED can be used with them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Heiko Schocher <hs@denx.de>
2021-07-11 03:14:36 +00:00
select MPC83XX_SECOND_I2C
mpc83xx: Introduce ARCH_MPC830* Replace CONFIG_MPC830* with proper CONFIG_ARCH_MPC830* Kconfig options. Signed-off-by: Mario Six <mario.six@gdsys.cc>
2019-01-21 08:17:24 +00:00
config ARCH_MPC8309
bool
select ARCH_MPC830X
mpc83xx: Kconfig: Migrate HRCW to Kconfig The HRCW (hardware reset configuration word) is a constant that must be hard-coded into the boot loader image. So, it must be available at compile time, and cannot be migrated to the DT mechanism, but has to be kept in Kconfig. Configuration of this crucial variable should still be somewhat comfortable. Hence, make its fields configurable in Kconfig, and assemble the final value from these. Signed-off-by: Mario Six <mario.six@gdsys.cc>
2019-01-21 08:17:54 +00:00
select MPC83XX_QUICC_ENGINE
select MPC83XX_PCI_SUPPORT
i2c: Rename SPL/TPL_I2C_SUPPORT to I2C Rename these options so that CONFIG_IS_ENABLED can be used with them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Heiko Schocher <hs@denx.de>
2021-07-11 03:14:36 +00:00
select MPC83XX_SECOND_I2C
mpc83xx: make ARCH_MPC8309 select SYS_FSL_ERRATUM_ESDHC111 The mpc8309 is also affected by the "Manual Asynchronous CMD12 abort operation causes protocol violations" erratum, though it is enumerated as eSDHC16 in the errata sheet for mpc8309. Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk> Reviewed-by: Mario Six <mario.six@gdsys.cc>
2019-12-11 09:39:36 +00:00
select SYS_FSL_ERRATUM_ESDHC111
powerpc: mpc83xx: convert CONFIG_FSL_ELBC to Kconfig This complements commit 068789773d0 which did the conversion for mpc85xx. Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk> Reviewed-by: Mario Six <mario.six@gdsys.cc>
2019-12-12 08:11:46 +00:00
select FSL_ELBC
mpc83xx: Introduce ARCH_MPC830* Replace CONFIG_MPC830* with proper CONFIG_ARCH_MPC830* Kconfig options. Signed-off-by: Mario Six <mario.six@gdsys.cc>
2019-01-21 08:17:24 +00:00
mpc83xx: Introduce ARCH_MPC831* Replace CONFIG_MPC833* with proper CONFIG_ARCH_MPC833* Kconfig options. Signed-off-by: Mario Six <mario.six@gdsys.cc>
2019-01-21 08:17:25 +00:00
config ARCH_MPC831X
bool
mpc83xx: Kconfig: Migrate HRCW to Kconfig The HRCW (hardware reset configuration word) is a constant that must be hard-coded into the boot loader image. So, it must be available at compile time, and cannot be migrated to the DT mechanism, but has to be kept in Kconfig. Configuration of this crucial variable should still be somewhat comfortable. Hence, make its fields configurable in Kconfig, and assemble the final value from these. Signed-off-by: Mario Six <mario.six@gdsys.cc>
2019-01-21 08:17:54 +00:00
select MPC83XX_PCI_SUPPORT
select MPC83XX_TSEC1_SUPPORT
select MPC83XX_TSEC2_SUPPORT
Finish converting CONFIG_SYS_CACHELINE_SIZE to Kconfig We move the SYS_CACHE_SHIFT_N options from arch/arm/Kconfig to arch/Kconfig, and introduce SYS_CACHE_SHIFT_4 to provide a size of 16. Introduce select statements for other architectures based on current usage. For MIPS, we take the existing arch-specific symbol and migrate to the generic symbol. This lets us remove a little bit of otherwise unused code. Cc: Alexey Brodkin <alexey.brodkin@synopsys.com> Cc: Anup Patel <anup.patel@wdc.com> Cc: Atish Patra <atish.patra@wdc.com> Cc: Bin Meng <bmeng.cn@gmail.com> Cc: Leo <ycliang@andestech.com> Cc: Palmer Dabbelt <palmer@dabbelt.com> Cc: Paul Walmsley <paul.walmsley@sifive.com> Cc: Sean Anderson <seanga2@gmail.com> Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com> Acked-by: Sean Anderson <seanga2@gmail.com> Reviewed-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com> Reviewed-by: Rick Chen <rick@andestech.com>
2021-08-26 15:47:59 +00:00
select SYS_CACHE_SHIFT_5
mpc83xx: Introduce ARCH_MPC831* Replace CONFIG_MPC833* with proper CONFIG_ARCH_MPC833* Kconfig options. Signed-off-by: Mario Six <mario.six@gdsys.cc>
2019-01-21 08:17:25 +00:00
config ARCH_MPC8313
bool
select ARCH_MPC831X
i2c: Rename SPL/TPL_I2C_SUPPORT to I2C Rename these options so that CONFIG_IS_ENABLED can be used with them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Heiko Schocher <hs@denx.de>
2021-07-11 03:14:36 +00:00
select MPC83XX_SECOND_I2C
powerpc: mpc83xx: convert CONFIG_FSL_ELBC to Kconfig This complements commit 068789773d0 which did the conversion for mpc85xx. Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk> Reviewed-by: Mario Six <mario.six@gdsys.cc>
2019-12-12 08:11:46 +00:00
select FSL_ELBC
mpc83xx: Introduce ARCH_MPC831* Replace CONFIG_MPC833* with proper CONFIG_ARCH_MPC833* Kconfig options. Signed-off-by: Mario Six <mario.six@gdsys.cc>
2019-01-21 08:17:25 +00:00
mpc83xx: Introduce ARCH_MPC832* Replace CONFIG_MPC832* with proper CONFIG_ARCH_MPC832* Kconfig options. Signed-off-by: Mario Six <mario.six@gdsys.cc>
2019-01-21 08:17:26 +00:00
config ARCH_MPC832X
bool
mpc83xx: Kconfig: Migrate HRCW to Kconfig The HRCW (hardware reset configuration word) is a constant that must be hard-coded into the boot loader image. So, it must be available at compile time, and cannot be migrated to the DT mechanism, but has to be kept in Kconfig. Configuration of this crucial variable should still be somewhat comfortable. Hence, make its fields configurable in Kconfig, and assemble the final value from these. Signed-off-by: Mario Six <mario.six@gdsys.cc>
2019-01-21 08:17:54 +00:00
select MPC83XX_QUICC_ENGINE
select MPC83XX_PCI_SUPPORT
Finish converting CONFIG_SYS_CACHELINE_SIZE to Kconfig We move the SYS_CACHE_SHIFT_N options from arch/arm/Kconfig to arch/Kconfig, and introduce SYS_CACHE_SHIFT_4 to provide a size of 16. Introduce select statements for other architectures based on current usage. For MIPS, we take the existing arch-specific symbol and migrate to the generic symbol. This lets us remove a little bit of otherwise unused code. Cc: Alexey Brodkin <alexey.brodkin@synopsys.com> Cc: Anup Patel <anup.patel@wdc.com> Cc: Atish Patra <atish.patra@wdc.com> Cc: Bin Meng <bmeng.cn@gmail.com> Cc: Leo <ycliang@andestech.com> Cc: Palmer Dabbelt <palmer@dabbelt.com> Cc: Paul Walmsley <paul.walmsley@sifive.com> Cc: Sean Anderson <seanga2@gmail.com> Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com> Acked-by: Sean Anderson <seanga2@gmail.com> Reviewed-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com> Reviewed-by: Rick Chen <rick@andestech.com>
2021-08-26 15:47:59 +00:00
select SYS_CACHE_SHIFT_5
mpc83xx: Introduce ARCH_MPC832* Replace CONFIG_MPC832* with proper CONFIG_ARCH_MPC832* Kconfig options. Signed-off-by: Mario Six <mario.six@gdsys.cc>
2019-01-21 08:17:26 +00:00
mpc83xx: Introduce ARCH_MPC834* Replace CONFIG_MPC834* with proper CONFIG_ARCH_MPC834* Kconfig options. Signed-off-by: Mario Six <mario.six@gdsys.cc>
2019-01-21 08:17:27 +00:00
config ARCH_MPC834X
bool
Finish converting CONFIG_SYS_CACHELINE_SIZE to Kconfig We move the SYS_CACHE_SHIFT_N options from arch/arm/Kconfig to arch/Kconfig, and introduce SYS_CACHE_SHIFT_4 to provide a size of 16. Introduce select statements for other architectures based on current usage. For MIPS, we take the existing arch-specific symbol and migrate to the generic symbol. This lets us remove a little bit of otherwise unused code. Cc: Alexey Brodkin <alexey.brodkin@synopsys.com> Cc: Anup Patel <anup.patel@wdc.com> Cc: Atish Patra <atish.patra@wdc.com> Cc: Bin Meng <bmeng.cn@gmail.com> Cc: Leo <ycliang@andestech.com> Cc: Palmer Dabbelt <palmer@dabbelt.com> Cc: Paul Walmsley <paul.walmsley@sifive.com> Cc: Sean Anderson <seanga2@gmail.com> Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com> Acked-by: Sean Anderson <seanga2@gmail.com> Reviewed-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com> Reviewed-by: Rick Chen <rick@andestech.com>
2021-08-26 15:47:59 +00:00
select SYS_CACHE_SHIFT_5
mpc83xx: Introduce ARCH_MPC834* Replace CONFIG_MPC834* with proper CONFIG_ARCH_MPC834* Kconfig options. Signed-off-by: Mario Six <mario.six@gdsys.cc>
2019-01-21 08:17:27 +00:00
mpc83xx: Introduce ARCH_MPC836* Replace CONFIG_MPC836* with proper CONFIG_ARCH_MPC836* Kconfig options. Signed-off-by: Mario Six <mario.six@gdsys.cc>
2019-01-21 08:17:28 +00:00
config ARCH_MPC8360
bool
mpc83xx: Kconfig: Migrate HRCW to Kconfig The HRCW (hardware reset configuration word) is a constant that must be hard-coded into the boot loader image. So, it must be available at compile time, and cannot be migrated to the DT mechanism, but has to be kept in Kconfig. Configuration of this crucial variable should still be somewhat comfortable. Hence, make its fields configurable in Kconfig, and assemble the final value from these. Signed-off-by: Mario Six <mario.six@gdsys.cc>
2019-01-21 08:17:54 +00:00
select MPC83XX_QUICC_ENGINE
select MPC83XX_PCI_SUPPORT
select MPC83XX_LDP_PIN
i2c: Rename SPL/TPL_I2C_SUPPORT to I2C Rename these options so that CONFIG_IS_ENABLED can be used with them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Heiko Schocher <hs@denx.de>
2021-07-11 03:14:36 +00:00
select MPC83XX_SECOND_I2C
Finish converting CONFIG_SYS_CACHELINE_SIZE to Kconfig We move the SYS_CACHE_SHIFT_N options from arch/arm/Kconfig to arch/Kconfig, and introduce SYS_CACHE_SHIFT_4 to provide a size of 16. Introduce select statements for other architectures based on current usage. For MIPS, we take the existing arch-specific symbol and migrate to the generic symbol. This lets us remove a little bit of otherwise unused code. Cc: Alexey Brodkin <alexey.brodkin@synopsys.com> Cc: Anup Patel <anup.patel@wdc.com> Cc: Atish Patra <atish.patra@wdc.com> Cc: Bin Meng <bmeng.cn@gmail.com> Cc: Leo <ycliang@andestech.com> Cc: Palmer Dabbelt <palmer@dabbelt.com> Cc: Paul Walmsley <paul.walmsley@sifive.com> Cc: Sean Anderson <seanga2@gmail.com> Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com> Acked-by: Sean Anderson <seanga2@gmail.com> Reviewed-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com> Reviewed-by: Rick Chen <rick@andestech.com>
2021-08-26 15:47:59 +00:00
select SYS_CACHE_SHIFT_5
mpc83xx: Introduce ARCH_MPC836* Replace CONFIG_MPC836* with proper CONFIG_ARCH_MPC836* Kconfig options. Signed-off-by: Mario Six <mario.six@gdsys.cc>
2019-01-21 08:17:28 +00:00
mpc83xx: Introduce ARCH_MPC837X Replace CONFIG_MPC837x with a proper CONFIG_ARCH_MPC837X Kconfig option. Signed-off-by: Mario Six <mario.six@gdsys.cc>
2019-01-21 08:17:29 +00:00
config ARCH_MPC837X
bool
mpc83xx: Kconfig: Migrate HRCW to Kconfig The HRCW (hardware reset configuration word) is a constant that must be hard-coded into the boot loader image. So, it must be available at compile time, and cannot be migrated to the DT mechanism, but has to be kept in Kconfig. Configuration of this crucial variable should still be somewhat comfortable. Hence, make its fields configurable in Kconfig, and assemble the final value from these. Signed-off-by: Mario Six <mario.six@gdsys.cc>
2019-01-21 08:17:54 +00:00
select MPC83XX_PCI_SUPPORT
select MPC83XX_TSEC1_SUPPORT
select MPC83XX_TSEC2_SUPPORT
select MPC83XX_PCIE1_SUPPORT
select MPC83XX_PCIE2_SUPPORT
select MPC83XX_SDHC_SUPPORT
sata: Rename SATA_SUPPORT to SATA Rename this options so that CONFIG_IS_ENABLED can be used with it. Signed-off-by: Simon Glass <sjg@chromium.org>
2021-08-08 18:20:17 +00:00
select MPC83XX_SATA
mpc83xx: Kconfig: Migrate HRCW to Kconfig The HRCW (hardware reset configuration word) is a constant that must be hard-coded into the boot loader image. So, it must be available at compile time, and cannot be migrated to the DT mechanism, but has to be kept in Kconfig. Configuration of this crucial variable should still be somewhat comfortable. Hence, make its fields configurable in Kconfig, and assemble the final value from these. Signed-off-by: Mario Six <mario.six@gdsys.cc>
2019-01-21 08:17:54 +00:00
select MPC83XX_LDP_PIN
i2c: Rename SPL/TPL_I2C_SUPPORT to I2C Rename these options so that CONFIG_IS_ENABLED can be used with them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Heiko Schocher <hs@denx.de>
2021-07-11 03:14:36 +00:00
select MPC83XX_SECOND_I2C
Finish converting CONFIG_SYS_CACHELINE_SIZE to Kconfig We move the SYS_CACHE_SHIFT_N options from arch/arm/Kconfig to arch/Kconfig, and introduce SYS_CACHE_SHIFT_4 to provide a size of 16. Introduce select statements for other architectures based on current usage. For MIPS, we take the existing arch-specific symbol and migrate to the generic symbol. This lets us remove a little bit of otherwise unused code. Cc: Alexey Brodkin <alexey.brodkin@synopsys.com> Cc: Anup Patel <anup.patel@wdc.com> Cc: Atish Patra <atish.patra@wdc.com> Cc: Bin Meng <bmeng.cn@gmail.com> Cc: Leo <ycliang@andestech.com> Cc: Palmer Dabbelt <palmer@dabbelt.com> Cc: Paul Walmsley <paul.walmsley@sifive.com> Cc: Sean Anderson <seanga2@gmail.com> Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com> Acked-by: Sean Anderson <seanga2@gmail.com> Reviewed-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com> Reviewed-by: Rick Chen <rick@andestech.com>
2021-08-26 15:47:59 +00:00
select SYS_CACHE_SHIFT_5
powerpc: mpc83xx: convert CONFIG_FSL_ELBC to Kconfig This complements commit 068789773d0 which did the conversion for mpc85xx. Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk> Reviewed-by: Mario Six <mario.six@gdsys.cc>
2019-12-12 08:11:46 +00:00
select FSL_ELBC
mpc83xx: Kconfig: Migrate HRCW to Kconfig The HRCW (hardware reset configuration word) is a constant that must be hard-coded into the boot loader image. So, it must be available at compile time, and cannot be migrated to the DT mechanism, but has to be kept in Kconfig. Configuration of this crucial variable should still be somewhat comfortable. Hence, make its fields configurable in Kconfig, and assemble the final value from these. Signed-off-by: Mario Six <mario.six@gdsys.cc>
2019-01-21 08:17:54 +00:00
mpc83xx: Migrate CONFIG_SYS_IMMR to Kconfig Migrate CONFIG_SYS_IMMR to Kconfig for MPC83xx. Signed-off-by: Mario Six <mario.six@gdsys.cc>
2019-01-21 08:18:10 +00:00
config SYS_IMMR
hex "Value for IMMR"
default 0xE0000000
help
Address for the Internal Memory-Mapped Registers (IMMR) window used
to configure the features of the SoC.
mpc83xx: Kconfig: Migrate HRCW to Kconfig The HRCW (hardware reset configuration word) is a constant that must be hard-coded into the boot loader image. So, it must be available at compile time, and cannot be migrated to the DT mechanism, but has to be kept in Kconfig. Configuration of this crucial variable should still be somewhat comfortable. Hence, make its fields configurable in Kconfig, and assemble the final value from these. Signed-off-by: Mario Six <mario.six@gdsys.cc>
2019-01-21 08:17:54 +00:00
source "arch/powerpc/cpu/mpc83xx/hrcw/Kconfig"
mpc83xx: Migrate BATS config to Kconfig The BATs (block address translation registers) determine the initial memory window mappings. Hence, they must be known at compile time and cannot be implemented in the DT mechanism. Configuration of this crucial variable should still be somewhat comfortable. Hence, make its fields configurable in Kconfig, and assemble the final value from these. Signed-off-by: Mario Six <mario.six@gdsys.cc>
2019-01-21 08:17:57 +00:00
source "arch/powerpc/cpu/mpc83xx/bats/Kconfig"
mpc83xx: Migrate LBLAW_* to Kconfig The LBLAW_* values determine the window configuration of the memory controller. Hence, they must be known at compile time, and cannot be implemented in the DT mechanism. Configuration of this crucial variable should still be somewhat comfortable. Hence, make its fields configurable in Kconfig, and assemble the final value from these. Signed-off-by: Mario Six <mario.six@gdsys.cc>
2019-01-21 08:17:58 +00:00
source "arch/powerpc/cpu/mpc83xx/lblaw/Kconfig"
mpc83xx: Migrate CONFIG_SYS_{BR, OR}*_PRELIM to Kconfig Migrate the BR/OR settings to Kconfig. These must be known at compile time, so cannot be configured via DT. Configuration of this crucial variable should still be somewhat comfortable. Hence, make its fields configurable in Kconfig, and assemble the final value from these. Signed-off-by: Mario Six <mario.six@gdsys.cc>
2019-01-21 08:18:03 +00:00
source "arch/powerpc/cpu/mpc83xx/elbc/Kconfig"
mpc83xx: Migrate HID config to Kconfig Mirate the HID configuration settings to Kconfig. Signed-off-by: Mario Six <mario.six@gdsys.cc>
2019-01-21 08:18:09 +00:00
source "arch/powerpc/cpu/mpc83xx/hid/Kconfig"
mpc8308: Migrate system io config to Kconfig Migrate the system IO configuration setting to Kconfig. Signed-off-by: Mario Six <mario.six@gdsys.cc>
2019-01-21 08:18:11 +00:00
source "arch/powerpc/cpu/mpc83xx/sysio/Kconfig"
mpc83xx: Migrate arbiter config to Kconfig Migrate the arbiter configuration to Kconfig. Signed-off-by: Mario Six <mario.six@gdsys.cc>
2019-01-21 08:18:12 +00:00
source "arch/powerpc/cpu/mpc83xx/arbiter/Kconfig"
mpc83xx: Migrate SPCR to Kconfig Migrate the SPCR setting to Kconfig. Signed-off-by: Mario Six <mario.six@gdsys.cc>
2019-01-21 08:18:13 +00:00
source "arch/powerpc/cpu/mpc83xx/initreg/Kconfig"
mpc83xx: Introduce ARCH_MPC837X Replace CONFIG_MPC837x with a proper CONFIG_ARCH_MPC837X Kconfig option. Signed-off-by: Mario Six <mario.six@gdsys.cc>
2019-01-21 08:17:29 +00:00
powerpc: mpc83xx: convert CONFIG_FSL_ELBC to Kconfig This complements commit 068789773d0 which did the conversion for mpc85xx. Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk> Reviewed-by: Mario Six <mario.six@gdsys.cc>
2019-12-12 08:11:46 +00:00
config FSL_ELBC
bool
kconfig: add board Kconfig and defconfig files This commit adds: - arch/${ARCH}/Kconfig provide a menu to select target boards - board/${VENDOR}/${BOARD}/Kconfig or board/${BOARD}/Kconfig set CONFIG macros to the appropriate values for each board - configs/${TARGET_BOARD}_defconfig default setting of each board (This commit was automatically generated by a conversion script based on boards.cfg) In Linux Kernel, defconfig files are located under arch/${ARCH}/configs/ directory. It works in Linux Kernel since ARCH is always given from the command line for cross compile. But in U-Boot, ARCH is not given from the command line. Which means we cannot know ARCH until the board configuration is done. That is why all the "*_defconfig" files should be gathered into a single directory ./configs/. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Acked-by: Simon Glass <sjg@chromium.org>
2014-07-30 05:08:14 +00:00
source "board/freescale/mpc837xerdb/Kconfig"
source "board/ids/ids8313/Kconfig"
km: modify Kconfig file organization for KM boards As preparation for the upcoming transferring of configurations from header files to Kconfig, a common Kconfig file for all KM boards was created. For the moment, it only sources the other three, more specific, Kconfig files. Therefore, the architecture Kconfig files now include the common Kconfig file. Also, the configuration selection for KM boards was moved from the architecture Kconfig files to the board specific Kconfig files. Signed-off-by: Pascal Linder <pascal.linder@edu.hefr.ch> Signed-off-by: Holger Brunck <holger.brunck@ch.abb.com> Cc: Mario Six <mario.six@gdsys.cc> Cc: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com> Signed-off-by: Stefan Roese <sr@denx.de>
2019-06-18 11:27:47 +00:00
source "board/keymile/Kconfig"
mpc83xx: Add gdsys hrcon board The gdsys hrcon board is based on a Freescale MPC8308 SOC. It boots from NOR-Flash, kernel and rootfs are stored on SD-Card. On board peripherals include: - 1x GbE (optional) - Lattice ECP3 FPGA connected via eLBC and PCIe Signed-off-by: Dirk Eibach <dirk.eibach@gdsys.cc> Signed-off-by: Stefan Roese <sr@denx.de>
2014-11-13 18:21:18 +00:00
source "board/gdsys/mpc8308/Kconfig"
kconfig: add board Kconfig and defconfig files This commit adds: - arch/${ARCH}/Kconfig provide a menu to select target boards - board/${VENDOR}/${BOARD}/Kconfig or board/${BOARD}/Kconfig set CONFIG macros to the appropriate values for each board - configs/${TARGET_BOARD}_defconfig default setting of each board (This commit was automatically generated by a conversion script based on boards.cfg) In Linux Kernel, defconfig files are located under arch/${ARCH}/configs/ directory. It works in Linux Kernel since ARCH is always given from the command line for cross compile. But in U-Boot, ARCH is not given from the command line. Which means we cannot know ARCH until the board configuration is done. That is why all the "*_defconfig" files should be gathered into a single directory ./configs/. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Acked-by: Simon Glass <sjg@chromium.org>
2014-07-30 05:08:14 +00:00
endmenu
Reference in a new issue Copy permalink