Mirrors/u-boot
2
0
Fork 0
mirror of https://github.com/AsahiLinux/u-boot synced 2024-12-12 14:23:00 +00:00
Code Issues Projects Releases Packages Wiki Activity
u-boot/configs/kmsupx5_defconfig

169 lines
4.5 KiB
Text
Raw Normal View History

kconfig: add board Kconfig and defconfig files This commit adds: - arch/${ARCH}/Kconfig provide a menu to select target boards - board/${VENDOR}/${BOARD}/Kconfig or board/${BOARD}/Kconfig set CONFIG macros to the appropriate values for each board - configs/${TARGET_BOARD}_defconfig default setting of each board (This commit was automatically generated by a conversion script based on boards.cfg) In Linux Kernel, defconfig files are located under arch/${ARCH}/configs/ directory. It works in Linux Kernel since ARCH is always given from the command line for cross compile. But in U-Boot, ARCH is not given from the command line. Which means we cannot know ARCH until the board configuration is done. That is why all the "*_defconfig" files should be gathered into a single directory ./configs/. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Acked-by: Simon Glass <sjg@chromium.org>
2014-07-30 05:08:14 +00:00
CONFIG_PPC=y
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
2022-10-21 00:22:39 +00:00
CONFIG_TEXT_BASE=0xF0000000
configs: Resync with savedefconfig Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2023-05-01 15:50:26 +00:00
CONFIG_ENV_SOURCE_FILE="km83xx"
env: Finish migration of common ENV options - In ARMv8 NXP Layerscape platforms we also need to make use of CONFIG_SYS_RELOC_GD_ENV_ADDR now, do so. - On ENV_IS_IN_REMOTE, CONFIG_ENV_OFFSET is never used, drop the define to 0. - Add Kconfig entry for ENV_ADDR. - Make ENV_ADDR / ENV_OFFSET depend on the env locations that use it. - Add ENV_xxx_REDUND options that depend on their primary option and SYS_REDUNDAND_ENVIRONMENT - On a number of PowerPC platforms, use SPL_ENV_ADDR not CONFIG_ENV_ADDR for the pre-main-U-Boot environment location. - On ENV_IS_IN_SPI_FLASH, check not for CONFIG_ENV_ADDR being set but rather it being non-zero, as it will now be zero by default. - Rework the env_offset absolute in env/embedded.o to not use CONFIG_ENV_OFFSET as it was the only use of ENV_OFFSET within ENV_IS_IN_FLASH. - Migrate all platforms. Cc: Wolfgang Denk <wd@denx.de> Cc: Joe Hershberger <joe.hershberger@ni.com> Cc: Patrick Delaunay <patrick.delaunay@st.com> Cc: uboot-stm32@st-md-mailman.stormreply.com Signed-off-by: Tom Rini <trini@konsulko.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com> Reviewed-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
2019-11-19 01:02:10 +00:00
CONFIG_ENV_SIZE=0x4000
CONFIG_ENV_SECT_SIZE=0x20000
configs: Resync with savedefconfig Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2021-06-28 14:17:29 +00:00
CONFIG_DEFAULT_DEVICE_TREE="kmsupm5"
configs: Resync with savedefconfig Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2020-02-06 18:42:52 +00:00
CONFIG_BOOTCOUNT_BOOTLIMIT=3
mpc83xx: Get rid of CONFIG_83XX_CLKIN MPC83xx uses CONFIG_83XX_CLKIN instead of CONFIG_SYS_CLK_FREQ to set the system clock. To migrate the architecture, we can replace CONFIG_83XX_CLKIN with CONFIG_SYS_CLK_FREQ. To do this * replace all occurrences of CONFIG_83XX_CLKIN with CONFIG_SYS_CLK_FREQ * set CONFIG_SYS_CLK_FREQ to the old value of CONFIG_83XX_CLKIN in all MPC83xx config files Signed-off-by: Mario Six <mario.six@gdsys.cc>
2019-01-21 08:17:53 +00:00
CONFIG_SYS_CLK_FREQ=66000000
configs: Resync with savedefconfig Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2022-04-08 17:36:51 +00:00
CONFIG_SYS_LOAD_ADDR=0x100000
CONFIG_ENV_ADDR=0xF00C0000
kconfig: add board Kconfig and defconfig files This commit adds: - arch/${ARCH}/Kconfig provide a menu to select target boards - board/${VENDOR}/${BOARD}/Kconfig or board/${BOARD}/Kconfig set CONFIG macros to the appropriate values for each board - configs/${TARGET_BOARD}_defconfig default setting of each board (This commit was automatically generated by a conversion script based on boards.cfg) In Linux Kernel, defconfig files are located under arch/${ARCH}/configs/ directory. It works in Linux Kernel since ARCH is always given from the command line for cross compile. But in U-Boot, ARCH is not given from the command line. Which means we cannot know ARCH until the board configuration is done. That is why all the "*_defconfig" files should be gathered into a single directory ./configs/. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Acked-by: Simon Glass <sjg@chromium.org>
2014-07-30 05:08:14 +00:00
CONFIG_MPC83xx=y
powerpc: Migrate HIGH_BATS to Kconfig Migrate the CONFIG_HIGH_BATS variable to Kconfig. Signed-off-by: Mario Six <mario.six@gdsys.cc>
2019-01-21 08:17:56 +00:00
CONFIG_HIGH_BATS=y
Convert CONFIG_SYS_INIT_RAM_LOCK to Kconfig This converts the following to Kconfig: CONFIG_SYS_INIT_RAM_LOCK Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2022-10-29 00:26:55 +00:00
CONFIG_SYS_INIT_RAM_LOCK=y
keymile: Make distinct kmsupx5, tuge1, kmopti2, and kmtepr2 configs The kmsupx5, tuge1, kmopti2, and kmtepr2 boards all build from the same include config file with lots of #ifdef logic. To ease Kconfig migration, create new config include files for these boards, and resolve the #ifdef logic as needed. Signed-off-by: Mario Six <mario.six@gdsys.cc>
2019-01-21 08:17:33 +00:00
CONFIG_TARGET_KMSUPX5=y
mpc83xx: Kconfig: Migrate HRCW to Kconfig The HRCW (hardware reset configuration word) is a constant that must be hard-coded into the boot loader image. So, it must be available at compile time, and cannot be migrated to the DT mechanism, but has to be kept in Kconfig. Configuration of this crucial variable should still be somewhat comfortable. Hence, make its fields configurable in Kconfig, and assemble the final value from these. Signed-off-by: Mario Six <mario.six@gdsys.cc>
2019-01-21 08:17:54 +00:00
CONFIG_CORE_PLL_RATIO_25_1=y
CONFIG_QUICC_MULT_FACTOR_3=y
CONFIG_BOOT_MEMORY_SPACE_LOW=y
CONFIG_BOOT_ROM_INTERFACE_GPCM_16BIT=y
mpc83xx: Migrate BATS config to Kconfig The BATs (block address translation registers) determine the initial memory window mappings. Hence, they must be known at compile time and cannot be implemented in the DT mechanism. Configuration of this crucial variable should still be somewhat comfortable. Hence, make its fields configurable in Kconfig, and assemble the final value from these. Signed-off-by: Mario Six <mario.six@gdsys.cc>
2019-01-21 08:17:57 +00:00
CONFIG_BAT0=y
CONFIG_BAT0_NAME="SDRAM"
CONFIG_BAT0_BASE=0x00000000
CONFIG_BAT0_LENGTH_256_MBYTES=y
CONFIG_BAT0_ACCESS_RW=y
CONFIG_BAT0_ICACHE_INHIBITED=y
CONFIG_BAT0_DCACHE_INHIBITED=y
CONFIG_BAT0_DCACHE_GUARDED=y
CONFIG_BAT0_USER_MODE_VALID=y
CONFIG_BAT0_SUPERVISOR_MODE_VALID=y
CONFIG_BAT1=y
CONFIG_BAT1_NAME="IMMR"
CONFIG_BAT1_BASE=0xE0000000
CONFIG_BAT1_LENGTH_4_MBYTES=y
CONFIG_BAT1_ACCESS_RW=y
CONFIG_BAT1_ICACHE_INHIBITED=y
CONFIG_BAT1_DCACHE_INHIBITED=y
CONFIG_BAT1_DCACHE_GUARDED=y
CONFIG_BAT1_USER_MODE_VALID=y
CONFIG_BAT1_SUPERVISOR_MODE_VALID=y
CONFIG_BAT2=y
CONFIG_BAT2_NAME="KMBEC_FPGA"
CONFIG_BAT2_BASE=0xE8000000
CONFIG_BAT2_LENGTH_128_MBYTES=y
CONFIG_BAT2_ACCESS_RW=y
CONFIG_BAT2_ICACHE_MEMORYCOHERENCE=y
CONFIG_BAT2_DCACHE_INHIBITED=y
CONFIG_BAT2_DCACHE_GUARDED=y
CONFIG_BAT2_USER_MODE_VALID=y
CONFIG_BAT2_SUPERVISOR_MODE_VALID=y
CONFIG_BAT3=y
CONFIG_BAT3_NAME="FLASH"
CONFIG_BAT3_BASE=0xF0000000
CONFIG_BAT3_LENGTH_256_MBYTES=y
CONFIG_BAT3_ACCESS_RW=y
CONFIG_BAT3_ICACHE_MEMORYCOHERENCE=y
CONFIG_BAT3_DCACHE_INHIBITED=y
CONFIG_BAT3_DCACHE_GUARDED=y
CONFIG_BAT3_USER_MODE_VALID=y
CONFIG_BAT3_SUPERVISOR_MODE_VALID=y
CONFIG_BAT4=y
CONFIG_BAT4_NAME="STACK_IN_DCACHE"
CONFIG_BAT4_BASE=0xE6000000
CONFIG_BAT4_ACCESS_RW=y
CONFIG_BAT4_USER_MODE_VALID=y
CONFIG_BAT4_SUPERVISOR_MODE_VALID=y
CONFIG_BAT5=y
CONFIG_BAT5_NAME="APP1"
CONFIG_BAT5_BASE=0xA0000000
CONFIG_BAT5_LENGTH_256_MBYTES=y
CONFIG_BAT5_ACCESS_RW=y
CONFIG_BAT5_ICACHE_MEMORYCOHERENCE=y
CONFIG_BAT5_DCACHE_INHIBITED=y
CONFIG_BAT5_DCACHE_GUARDED=y
CONFIG_BAT5_USER_MODE_VALID=y
CONFIG_BAT5_SUPERVISOR_MODE_VALID=y
mpc83xx: Migrate LBLAW_* to Kconfig The LBLAW_* values determine the window configuration of the memory controller. Hence, they must be known at compile time, and cannot be implemented in the DT mechanism. Configuration of this crucial variable should still be somewhat comfortable. Hence, make its fields configurable in Kconfig, and assemble the final value from these. Signed-off-by: Mario Six <mario.six@gdsys.cc>
2019-01-21 08:17:58 +00:00
CONFIG_LBLAW0=y
CONFIG_LBLAW0_BASE=0xF0000000
CONFIG_LBLAW0_NAME="FLASH"
CONFIG_LBLAW0_LENGTH_256_MBYTES=y
CONFIG_LBLAW1=y
CONFIG_LBLAW1_BASE=0xE8000000
CONFIG_LBLAW1_NAME="KMBEC_FPGA"
CONFIG_LBLAW1_LENGTH_128_MBYTES=y
CONFIG_LBLAW2=y
CONFIG_LBLAW2_BASE=0xA0000000
CONFIG_LBLAW2_NAME="APP1"
CONFIG_LBLAW2_LENGTH_256_MBYTES=y
mpc83xx: Migrate HID config to Kconfig Mirate the HID configuration settings to Kconfig. Signed-off-by: Mario Six <mario.six@gdsys.cc>
2019-01-21 08:18:09 +00:00
CONFIG_HID0_FINAL_EMCP=y
CONFIG_HID0_FINAL_ICE=y
CONFIG_HID2_HBE=y
mpc83xx: Migrate arbiter config to Kconfig Migrate the arbiter configuration to Kconfig. Signed-off-by: Mario Six <mario.six@gdsys.cc>
2019-01-21 08:18:12 +00:00
CONFIG_ACR_PIPE_DEP_4=y
CONFIG_ACR_RPTCNT_4=y
CONFIG_ACR_APARK_MASTER=y
CONFIG_ACR_PARKM_USB_I2C1_BOOT=y
configs: Resync with savedefconfig Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2019-05-26 18:45:25 +00:00
CONFIG_LCRR_EADC_1=y
CONFIG_LCRR_CLKDIV_2=y
Convert CONFIG_83XX_PCICLK to Kconfig This converts the following to Kconfig: CONFIG_83XX_PCICLK Signed-off-by: Tom Rini <trini@konsulko.com>
2021-12-17 23:08:36 +00:00
CONFIG_83XX_PCICLK=0x3ef1480
configs: Resync with savedefconfig Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2023-05-01 15:50:26 +00:00
# CONFIG_PCI is not set
Convert CONFIG_SYS_MONITOR_LEN to Kconfig This converts the following to Kconfig: CONFIG_SYS_MONITOR_LEN To do this, we set a default of 0 for everyone because there are a number of cases where we define CONFIG_SYS_MONITOR_LEN but the only impact is that we set TOTAL_MALLOC_LEN to be CONFIG_SYS_MALLOC_LEN + CONFIG_ENV_SIZE, so we must continue to allow all boards to set this value. Update the SPL code to use 200 KB as the default raw U-Boot size directly, if we don't have a real CONFIG_SYS_MONITOR_LEN value. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2022-10-29 00:27:07 +00:00
CONFIG_SYS_MONITOR_LEN=786432
Kconfig: Move CONFIG_FIT and related options to Kconfig There are already two FIT options in Kconfig but the CONFIG options are still in the header files. We need to do a proper move to fix this. Move these options to Kconfig and tidy up board configuration: CONFIG_FIT CONFIG_OF_BOARD_SETUP CONFIG_OF_SYSTEM_SETUP CONFIG_FIT_SIGNATURE CONFIG_FIT_BEST_MATCH CONFIG_FIT_VERBOSE CONFIG_OF_STDOUT_VIA_ALIAS CONFIG_RSA Unfortunately the first one is a little complicated. We need to make sure this option is not enabled in SPL by this change. Also this option is enabled automatically in the host builds by defining CONFIG_FIT in the image.h file. To solve this, add a new IMAGE_USE_FIT #define which can be used in files that are built on the host but must also build for U-Boot and SPL. Note: Masahiro's moveconfig.py script is amazing. Signed-off-by: Simon Glass <sjg@chromium.org> [trini: Add microblaze change, various configs/ re-applies] Signed-off-by: Tom Rini <trini@konsulko.com>
2016-02-23 05:55:43 +00:00
CONFIG_OF_BOARD_SETUP=y
CONFIG_OF_STDOUT_VIA_ALIAS=y
configs: Re-sync almost all of cmd/Kconfig This syncs up the current cmd/Kconfig and include/configs/ files with the only exception being CMD_NAND. Due to how we have used this historically we need to take further care here when converting. Signed-off-by: Tom Rini <trini@konsulko.com>
2016-04-22 20:41:25 +00:00
CONFIG_AUTOBOOT_KEYED=y
CONFIG_AUTOBOOT_PROMPT="Hit <SPACE> key to stop autoboot in %2ds\n"
CONFIG_AUTOBOOT_STOP_STR=" "
configs: Resync with savedefconfig Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2020-10-09 16:22:06 +00:00
CONFIG_BOARD_EARLY_INIT_R=y
Convert CONFIG_HWCONFIG to Kconfig This converts the following to Kconfig: CONFIG_HWCONFIG Signed-off-by: Tom Rini <trini@konsulko.com>
2022-11-19 23:45:16 +00:00
# CONFIG_HWCONFIG is not set
configs: Resync with savedefconfig Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2020-10-09 16:22:06 +00:00
CONFIG_LAST_STAGE_INIT=y
CONFIG_MISC_INIT_R=y
CONFIG_HUSH_PARSER=y
Convert CONFIG_SYS_MAXARGS to Kconfig This converts the following to Kconfig: CONFIG_SYS_MAXARGS Signed-off-by: Tom Rini <trini@konsulko.com>
2022-05-11 20:21:06 +00:00
CONFIG_SYS_MAXARGS=32
Convert CONFIG_SYS_CBSIZE to Kconfig This converts the following to Kconfig: CONFIG_SYS_CBSIZE Signed-off-by: Tom Rini <trini@konsulko.com>
2022-05-11 22:01:06 +00:00
CONFIG_SYS_CBSIZE=512
Convert CONFIG_SYS_PBSIZE to Kconfig This converts the following to Kconfig: CONFIG_SYS_PBSIZE Signed-off-by: Tom Rini <trini@konsulko.com>
2022-05-11 21:38:09 +00:00
CONFIG_SYS_PBSIZE=532
Convert CONFIG_SYS_BOOTM_LEN to Kconfig This converts the following to Kconfig: CONFIG_SYS_BOOTM_LEN As part of this, rework error handling in boot/bootm.c so that we pass the buffer size to handle_decomp_error as CONFIG_SYS_BOOTM_LEN will not be available to host tools but we do know the size that we passed to malloc(). Cc: Soeren Moch <smoch@web.de> Signed-off-by: Tom Rini <trini@konsulko.com>
2022-06-25 23:29:46 +00:00
CONFIG_SYS_BOOTM_LEN=0x2000000
cmd: Toggle the default value of CONFIG_CMD_IMLS Having this as a 'default y' is rather annoying because it doesn't actually compile unless other options are defined in the board header: ../cmd/bootm.c: In function 'do_imls_nor': ../cmd/bootm.c:330:7: error: 'CONFIG_SYS_MAX_FLASH_BANKS' undeclared (first use in this function); did you mean 'CONFIG_SYS_MAX_FLASH_SECT'? i < CONFIG_SYS_MAX_FLASH_BANKS; ++i, ++info) { Make it 'default n' so people who develop new boards that start from a blank defconfig have one less compilation failure to debug. Signed-off-by: Tuomas Tynkkynen <tuomas.tynkkynen@iki.fi>
2017-10-08 18:48:01 +00:00
CONFIG_CMD_IMLS=y
configs: Re-sync with cmd/Kconfig Update the config.h and defconfig files for the commands that 8e3c036 converted over to Kconfig Signed-off-by: Tom Rini <trini@konsulko.com>
2016-04-24 21:29:26 +00:00
CONFIG_CMD_ASKENV=y
CONFIG_CMD_GREPENV=y
Convert CONFIG_CMD_EEPROM et al to Kconfig This converts the following to Kconfig: CONFIG_CMD_EEPROM CONFIG_CMD_EEPROM_LAYOUT CONFIG_EEPROM_LAYOUT_HELP_STRING Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com> [trini: Rework Kconfig logic slightly, define EEPROM location on TI eval platforms] Signed-off-by: Tom Rini <trini@konsulko.com>
2017-05-17 09:25:10 +00:00
CONFIG_CMD_EEPROM=y
Convert CONFIG_SYS_I2C_EEPROM_ADDR et al to Kconfig - Rename usages of CONFIG_SYS_DEF_EEPROM_ADDR to CONFIG_SYS_I2C_EEPROM_ADDR based on current usage. - Convert CONFIG_SYS_I2C_EEPROM_ADDR, CONFIG_SYS_I2C_EEPROM_ADDR_LEN, CONFIG_SYS_I2C_EEPROM_BUS, CONFIG_CONFIG_SYS_EEPROM_SIZE CONFIG_SYS_EEPROM_PAGE_WRITE_BITS and CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS to Kconfig. We move these symbols around a bit and add appropriate dependencies to them. In some cases, we now add a correct default value as well. Signed-off-by: Tom Rini <trini@konsulko.com>
2021-08-17 21:59:45 +00:00
CONFIG_SYS_EEPROM_PAGE_WRITE_BITS=3
CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS=10
configs: Re-sync almost all of cmd/Kconfig This syncs up the current cmd/Kconfig and include/configs/ files with the only exception being CMD_NAND. Due to how we have used this historically we need to take further care here when converting. Signed-off-by: Tom Rini <trini@konsulko.com>
2016-04-22 20:41:25 +00:00
CONFIG_CMD_I2C=y
Convert CONFIG_SYS_LOADS_BAUD_CHANGE et al to Kconfig This converts the following to Kconfig: CONFIG_SYS_LOADS_BAUD_CHANGE CONFIG_LOADS_ECHO As part of this, we move CMD_SAVES to be after CMD_LOADS as they are logically related (load or save an s-record format file) and this makes grouping of CONFIG_SYS_LOADS_BAUD_CHANGE easier. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2022-10-29 00:27:02 +00:00
CONFIG_LOADS_ECHO=y
CONFIG_SYS_LOADS_BAUD_CHANGE=y
configs: Re-sync almost all of cmd/Kconfig This syncs up the current cmd/Kconfig and include/configs/ files with the only exception being CMD_NAND. Due to how we have used this historically we need to take further care here when converting. Signed-off-by: Tom Rini <trini@konsulko.com>
2016-04-22 20:41:25 +00:00
CONFIG_CMD_DHCP=y
Convert CONFIG_BOOTP_MAY_FAIL et al to Kconfig This converts the following to Kconfig: CONFIG_BOOTP_MAY_FAIL CONFIG_BOOTP_VENDOREX CONFIG_BOOTP_BOOTFILESIZE CONFIG_BOOTP_NISDOMAIN CONFIG_BOOTP_TIMEOFFSET Cc: Ramon Fried <rfried.dev@gmail.com> Signed-off-by: Tom Rini <trini@konsulko.com>
2022-02-25 16:19:50 +00:00
CONFIG_BOOTP_BOOTFILESIZE=y
configs: Re-sync with cmd/Kconfig Update the config.h and defconfig files for the commands that 8e3c036 converted over to Kconfig Signed-off-by: Tom Rini <trini@konsulko.com>
2016-04-24 21:29:26 +00:00
CONFIG_CMD_MII=y
configs: Re-sync almost all of cmd/Kconfig This syncs up the current cmd/Kconfig and include/configs/ files with the only exception being CMD_NAND. Due to how we have used this historically we need to take further care here when converting. Signed-off-by: Tom Rini <trini@konsulko.com>
2016-04-22 20:41:25 +00:00
CONFIG_CMD_PING=y
Convert CONFIG_CMD_JFFS2 to Kconfig This converts the following to Kconfig: CONFIG_CMD_JFFS2 Signed-off-by: Simon Glass <sjg@chromium.org>
2017-05-17 09:25:37 +00:00
CONFIG_CMD_JFFS2=y
configs: Migrate and re-enabled CONFIG_CMD_MTDPARTS Now that CMD_UBI does not select CMD_MTDPARTS we need to make platforms that had been enabling it turn it on by hand. This exposed that we had not yet migrated CMD_MTDPARTS fully, so do so now. Fixes: 86dfa556d927 ("cmd: ubi: Remove useless call to mtdparts_init()") Signed-off-by: Tom Rini <trini@konsulko.com>
2018-11-14 00:54:45 +00:00
CONFIG_CMD_MTDPARTS=y
Kconfig: Migrate MTDIDS_DEFAULT / MTDPARTS_DEFAULT We move all instances of CONFIG_MTDIDS_DEFAULT and CONFIG_MTDPARTS_DEFAULT from the header files to the defconfig files. There's a few cases here where we need to expand upon what was in the header file. Tested-by: Adam Ford <aford173@gmail.com> #omap3_logic Signed-off-by: Tom Rini <trini@konsulko.com>
2017-10-22 21:55:07 +00:00
CONFIG_MTDIDS_DEFAULT="nor0=boot"
CONFIG_MTDPARTS_DEFAULT="mtdparts=boot:768k(u-boot),128k(env),128k(envred),-(ubi0);"
kconfig: introduce kconfig for UBI move the UBI config options into Kconfig. Signed-off-by: Heiko Schocher <hs@denx.de> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Andrew F. Davis <afd@ti.com> Reviewed by: Evgeni Dobrev <evgeni at studio-punkt.com>
2016-09-21 05:58:19 +00:00
CONFIG_CMD_UBI=y
configs: Migrate RBTREE, LZO, CMD_MTDPARTS, CMD_UBI and CMD_UBIFS The above CONFIG options are in Kconfig, and now have correct depends and inter-dependencies. Migrate these to configs/ from include/configs/. In the case of CMD_UBIFS also change it to be a default y if CMD_UBI. Signed-off-by: Tom Rini <trini@konsulko.com>
2017-07-22 22:36:16 +00:00
# CONFIG_CMD_UBIFS is not set
Convert CONFIG_ENV_OVERWRITE to Kconfig This converts the following to Kconfig: CONFIG_ENV_OVERWRITE Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Rerun migration, remove some comments] Signed-off-by: Tom Rini <trini@konsulko.com>
2020-07-03 11:48:56 +00:00
CONFIG_ENV_OVERWRITE=y
defconfigs: Migrate CONFIG_SYS_REDUNDAND_ENVIRONMENT Move this symbol to Kconfig. As part of this we can drop a UBI-specific symbol that was a stop-gap for not having this particular symbol in Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com>
2019-11-10 16:28:03 +00:00
CONFIG_SYS_REDUNDAND_ENVIRONMENT=y
env: Finish migration of common ENV options - In ARMv8 NXP Layerscape platforms we also need to make use of CONFIG_SYS_RELOC_GD_ENV_ADDR now, do so. - On ENV_IS_IN_REMOTE, CONFIG_ENV_OFFSET is never used, drop the define to 0. - Add Kconfig entry for ENV_ADDR. - Make ENV_ADDR / ENV_OFFSET depend on the env locations that use it. - Add ENV_xxx_REDUND options that depend on their primary option and SYS_REDUNDAND_ENVIRONMENT - On a number of PowerPC platforms, use SPL_ENV_ADDR not CONFIG_ENV_ADDR for the pre-main-U-Boot environment location. - On ENV_IS_IN_SPI_FLASH, check not for CONFIG_ENV_ADDR being set but rather it being non-zero, as it will now be zero by default. - Rework the env_offset absolute in env/embedded.o to not use CONFIG_ENV_OFFSET as it was the only use of ENV_OFFSET within ENV_IS_IN_FLASH. - Migrate all platforms. Cc: Wolfgang Denk <wd@denx.de> Cc: Joe Hershberger <joe.hershberger@ni.com> Cc: Patrick Delaunay <patrick.delaunay@st.com> Cc: uboot-stm32@st-md-mailman.stormreply.com Signed-off-by: Tom Rini <trini@konsulko.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com> Reviewed-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
2019-11-19 01:02:10 +00:00
CONFIG_ENV_ADDR_REDUND=0xF00E0000
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
2022-03-11 14:12:07 +00:00
CONFIG_USE_ETHPRIME=y
CONFIG_ETHPRIME="UEC0"
configs: Resync with savedefconfig Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2020-10-09 16:22:06 +00:00
CONFIG_VERSION_VARIABLE=y
Convert CONFIG_BOOTCOUNT_LIMIT to Kconfig This converts the following to Kconfig: CONFIG_BOOTCOUNT_LIMIT Signed-off-by: Lukasz Majewski <lukma@denx.de> Tested-by: Alex Kiernan <alex.kiernan@gmail.com> Reviewed-by: Hannes Schmelzer <hannes.schmelzer@br-automation.com> Acked-by: Hannes Schmelzer <hannes.schmelzer@br-automation.com>
2018-02-09 22:50:57 +00:00
CONFIG_BOOTCOUNT_LIMIT=y
mpc83xx, keymile boards: enable DM_ETH and add DTS enable DTS support for keymile mpc83xx based boards. get rid of compile warning: ===================== WARNING ====================== This board does not use CONFIG_DM_ETH (Driver Model for Ethernet drivers). Please update the board to use CONFIG_DM_ETH before the v2020.07 release. Failure to update by the deadline may result in board removal. See doc/driver-model/migration.rst for more info. ==================================================== Therefore done: - add DTS for all mpc83xx based boards from keymile mainly they are not mainlined to linux. - add u-boot specific dtsi - add stdout-path - add missing ucc4 par_io definitions, which were in board code, but not in linux DTS - remove not used ethernet nodes Signed-off-by: Heiko Schocher <hs@denx.de> Patch-cc: Mario Six <mario.six@gdsys.cc> Patch-cc: Qiang Zhao <qiang.zhao@nxp.com> Series-to: u-boot Series-version: 3 Series-changes: 3 - rebase patchset to current mainline commit c0192950df - update defconfig files Series-changes: 2 - add patch which fixes Codingstyle errors in drivers/qe - add patch which converts the mpc83xx based boards from keymile to DM_ETH Cover-letter: powerpc, mpc83xx: add DM_ETH support This patch series adds DM ethernet support for mpc83xx based keymile boards. Travis build: END
2020-02-03 06:43:57 +00:00
CONFIG_DM_BOOTCOUNT=y
CONFIG_BOOTCOUNT_MEM=y
Convert CONFIG_SYS_BOOTCOUNT_LE et al to Kconfig This converts the following to Kconfig: CONFIG_SYS_BOOTCOUNT_LE CONFIG_SYS_BOOTCOUNT_BE Signed-off-by: Tom Rini <trini@konsulko.com>
2022-06-25 15:02:49 +00:00
CONFIG_SYS_BOOTCOUNT_BE=y
Convert CONFIG_SYS_BR0_PRELIM et al to Kconfig This converts the following to Kconfig: CONFIG_SYS_BR0_PRELIM CONFIG_SYS_OR1_PRELIM CONFIG_SYS_BR1_PRELIM CONFIG_SYS_OR2_PRELIM CONFIG_SYS_BR2_PRELIM CONFIG_SYS_OR2_PRELIM CONFIG_SYS_BR3_PRELIM CONFIG_SYS_OR3_PRELIM CONFIG_SYS_BR4_PRELIM CONFIG_SYS_OR4_PRELIM CONFIG_SYS_BR5_PRELIM CONFIG_SYS_OR5_PRELIM CONFIG_SYS_BR6_PRELIM CONFIG_SYS_OR6_PRELIM CONFIG_SYS_BR7_PRELIM CONFIG_SYS_OR7_PRELIM This also introduces CONFIG_SYS_BR0_PRELIM_BOOL as not all platforms that can set these values do so. Add the relevant SYS_BRx_PRELIM_BOOL to platforms that had not been previously migrated. Signed-off-by: Tom Rini <trini@konsulko.com>
2021-11-13 23:10:40 +00:00
CONFIG_SYS_BR0_PRELIM_BOOL=y
CONFIG_SYS_BR0_PRELIM=0xF0001001
CONFIG_SYS_OR0_PRELIM=0xF0000E55
CONFIG_SYS_BR1_PRELIM_BOOL=y
CONFIG_SYS_BR1_PRELIM=0xE8000801
CONFIG_SYS_OR1_PRELIM=0xF8000E25
CONFIG_SYS_BR2_PRELIM_BOOL=y
CONFIG_SYS_BR2_PRELIM=0xA0000801
CONFIG_SYS_OR2_PRELIM=0xF0000C25
km/ppc: migrate all mpc83xx to DM_I2C Enable DM_I2C and I2C mux to get rid of the usage of the legacy i2c driver. Signed-off-by: Holger Brunck <holger.brunck@hitachienergy.com>
2022-12-02 17:22:42 +00:00
CONFIG_DM_I2C=y
i2c: fsl_i2c: Migrate to Kconfig - As there are no boards that use different values for speed / slave on different buses, use a single option. - Switch to using the common SYS_I2C_SPEED / SYS_I2C_SLAVE options. - Introduce _HAS_ options for additional buses as only the first one is common to all users. - Convert all remaining symbols to Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com>
2021-08-19 03:12:35 +00:00
CONFIG_SYS_I2C_FSL=y
km/ppc: migrate all mpc83xx to DM_I2C Enable DM_I2C and I2C mux to get rid of the usage of the legacy i2c driver. Signed-off-by: Holger Brunck <holger.brunck@hitachienergy.com>
2022-12-02 17:22:42 +00:00
CONFIG_I2C_MUX=y
CONFIG_I2C_MUX_PCA954x=y
configs: Re-sync Signed-off-by: Tom Rini <trini@konsulko.com>
2017-03-13 17:48:42 +00:00
# CONFIG_MMC is not set
mtd: rename CONFIG_MTD_DEVICE -> CONFIG_MTD Like in Linux, just use CONFIG_MTD to compile the MTD stack. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Reviewed-by: Boris Brezillon <boris.brezillon@bootlin.com>
2019-10-03 17:50:05 +00:00
CONFIG_MTD=y
flash: complete CONFIG_SYS_NO_FLASH move with renaming We repeated partial moves for CONFIG_SYS_NO_FLASH, but this is not completed. Finish this work by the tool. During this move, let's rename it to CONFIG_MTD_NOR_FLASH. Actually, we have more instances of "#ifndef CONFIG_SYS_NO_FLASH" than those of "#ifdef CONFIG_SYS_NO_FLASH". Flipping the logic will make the code more readable. Besides, negative meaning symbols do not fit in obj-$(CONFIG_...) style Makefiles. This commit was created as follows: [1] Edit "default n" to "default y" in the config entry in common/Kconfig. [2] Run "tools/moveconfig.py -y -r HEAD SYS_NO_FLASH" [3] Rename the instances in defconfigs by the following: find . -path './configs/*_defconfig' | xargs sed -i \ -e '/CONFIG_SYS_NO_FLASH=y/d' \ -e 's/# CONFIG_SYS_NO_FLASH is not set/CONFIG_MTD_NOR_FLASH=y/' [4] Change the conditionals by the following: find . -name '*.[ch]' | xargs sed -i \ -e 's/ifndef CONFIG_SYS_NO_FLASH/ifdef CONFIG_MTD_NOR_FLASH/' \ -e 's/ifdef CONFIG_SYS_NO_FLASH/ifndef CONFIG_MTD_NOR_FLASH/' \ -e 's/!defined(CONFIG_SYS_NO_FLASH)/defined(CONFIG_MTD_NOR_FLASH)/' \ -e 's/defined(CONFIG_SYS_NO_FLASH)/!defined(CONFIG_MTD_NOR_FLASH)/' [5] Modify the following manually - Rename the rest of instances - Remove the description from README - Create the new Kconfig entry in drivers/mtd/Kconfig - Remove the old Kconfig entry from common/Kconfig - Remove the garbage comments from include/configs/*.h Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-02-11 13:43:54 +00:00
CONFIG_MTD_NOR_FLASH=y
Convert CONFIG_FLASH_CFI_DRIVER et al to Kconfig This converts the following to Kconfig: CONFIG_FLASH_CFI_DRIVER CONFIG_SYS_FLASH_USE_BUFFER_WRITE CONFIG_FLASH_CFI_MTD CONFIG_SYS_FLASH_PROTECTION CONFIG_SYS_FLASH_CFI Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Re-migrate] Signed-off-by: Tom Rini <trini@konsulko.com>
2018-10-14 20:10:50 +00:00
CONFIG_FLASH_CFI_DRIVER=y
Convert CONFIG_FLASH_SHOW_PROGRESS to Kconfig This converts the following to Kconfig: CONFIG_FLASH_SHOW_PROGRESS Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-02 21:42:20 +00:00
CONFIG_FLASH_SHOW_PROGRESS=0
Convert CONFIG_FLASH_CFI_DRIVER et al to Kconfig This converts the following to Kconfig: CONFIG_FLASH_CFI_DRIVER CONFIG_SYS_FLASH_USE_BUFFER_WRITE CONFIG_FLASH_CFI_MTD CONFIG_SYS_FLASH_PROTECTION CONFIG_SYS_FLASH_CFI Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Re-migrate] Signed-off-by: Tom Rini <trini@konsulko.com>
2018-10-14 20:10:50 +00:00
CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y
CONFIG_FLASH_CFI_MTD=y
CONFIG_SYS_FLASH_PROTECTION=y
CONFIG_SYS_FLASH_CFI=y
mpc83xx, keymile boards: enable DM_ETH and add DTS enable DTS support for keymile mpc83xx based boards. get rid of compile warning: ===================== WARNING ====================== This board does not use CONFIG_DM_ETH (Driver Model for Ethernet drivers). Please update the board to use CONFIG_DM_ETH before the v2020.07 release. Failure to update by the deadline may result in board removal. See doc/driver-model/migration.rst for more info. ==================================================== Therefore done: - add DTS for all mpc83xx based boards from keymile mainly they are not mainlined to linux. - add u-boot specific dtsi - add stdout-path - add missing ucc4 par_io definitions, which were in board code, but not in linux DTS - remove not used ethernet nodes Signed-off-by: Heiko Schocher <hs@denx.de> Patch-cc: Mario Six <mario.six@gdsys.cc> Patch-cc: Qiang Zhao <qiang.zhao@nxp.com> Series-to: u-boot Series-version: 3 Series-changes: 3 - rebase patchset to current mainline commit c0192950df - update defconfig files Series-changes: 2 - add patch which fixes Codingstyle errors in drivers/qe - add patch which converts the mpc83xx based boards from keymile to DM_ETH Cover-letter: powerpc, mpc83xx: add DM_ETH support This patch series adds DM ethernet support for mpc83xx based keymile boards. Travis build: END
2020-02-03 06:43:57 +00:00
CONFIG_DM_ETH_PHY=y
CONFIG_QE_UEC=y
# CONFIG_PINCTRL_FULL is not set
configs: Migrate CONFIG_FMAN_ENET and some related options to Kconfig Move the main symbol for Freescale Fman Ethernet controller option to Kconfig. Also migrate the CONFIG_SYS_QE_FMAN_FW_IN_xxx macros and rename the SPIFLASH one to follow the same format as all of the others. To do this fully we need to migrate CONFIG_QC, do so. Signed-off-by: Tom Rini <trini@konsulko.com>
2019-05-12 11:59:12 +00:00
CONFIG_QE=y
ns16550: move CONFIG_SYS_NS16550 to Kconfig Move CONFIG_SYS_NS16550 to Kconfig, and run moveconfig.py. Signed-off-by: Thomas Chou <thomas@wytron.com.tw>
2015-11-19 13:48:14 +00:00
CONFIG_SYS_NS16550=y
Reference in a new issue Copy permalink