Mirrors/u-boot
2
0
Fork 0
mirror of https://github.com/AsahiLinux/u-boot synced 2024-12-22 03:03:05 +00:00
Code Issues Projects Releases Packages Wiki Activity
u-boot/drivers/net/Kconfig

901 lines
25 KiB
Text
Raw Normal View History

drivers: net: Provide Kconfig menu for PHYLIB Provide the necessary Kconfig symbols so that PHYLIB support may be enabled in Kconfig, as opposed to needing to #define these symbols in C source headers. BITBANGMII and MV88E6352_SWITCH are left out of the PHYLIB submenu as they don't seem to explicitly depend on it (i.e. they do not use the phy_driver class). Signed-off-by: Alexandru Gagniuc <alex.g@adaptrum.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2017-02-07 03:17:34 +00:00
source "drivers/net/phy/Kconfig"
configs: ls1012a: add pfe configuration for LS1012A Add configurations for PFE. Signed-off-by: Calvin Johnson <calvin.johnson@nxp.com> Signed-off-by: Anjaneyulu Jagarlmudi <anji.jagarlmudi@nxp.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2018-03-08 10:00:35 +00:00
source "drivers/net/pfe_eth/Kconfig"
drivers/fsl-mc: Create Kconfig file to manage driver specific configs better Create drivers/net/fsl-mc/Kconfig and move fsl-mc specific configs from arch/arm/cpu/armv8/fsl-layerscape/Kconfig to this new Kconfig Signed-off-by: Florinel Iordache <florinel.iordache@nxp.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2019-05-15 09:09:21 +00:00
source "drivers/net/fsl-mc/Kconfig"
net: brcm: netXtreme driver Broadcom bnxt L2 driver support. Used by the Broadcom iproc platforms. Signed-off-by: Bharat Gooty <bharat.gooty@broadcom.com> Reviewed-by: Ramon Fried <rfried.dev@gmail.com> Signed-off-by: Roman Bacik <roman.bacik@broadcom.com>
2021-11-08 22:46:10 +00:00
source "drivers/net/bnxt/Kconfig"
drivers: net: Provide Kconfig menu for PHYLIB Provide the necessary Kconfig symbols so that PHYLIB support may be enabled in Kconfig, as opposed to needing to #define these symbols in C source headers. BITBANGMII and MV88E6352_SWITCH are left out of the PHYLIB submenu as they don't seem to explicitly depend on it (i.e. they do not use the phy_driver class). Signed-off-by: Alexandru Gagniuc <alex.g@adaptrum.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2017-02-07 03:17:34 +00:00
net: Move network rules to drivers/net The code under drivers/net is related to ethernet networking drivers, in some fashion or another. Drop these from the top-level Makefile and also move the phy rule into drivers/net/Makefile which is where it belongs. Make the new rule for drivers/net check for the build-stage relevant ETH symbol. Fix up some Kconfig dependencies while we're here to mirror how the Makefile logic now works. Signed-off-by: Simon Glass <sjg@chromium.org> [trini: Introduce ETH, Kconfig dependency changes, am43xx fix] Signed-off-by: Tom Rini <trini@konsulko.com>
2021-08-08 18:20:31 +00:00
config ETH
def_bool y
dm: eth: Add basic driver model support to Ethernet stack First just add support for MAC drivers. Signed-off-by: Joe Hershberger <joe.hershberger@ni.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2015-03-22 22:09:10 +00:00
config DM_ETH
bool "Enable Driver Model for Ethernet drivers"
depends on DM
help
Enable driver model for Ethernet.
net: Correct comment in Kconfig Signed-off-by: Joe Hershberger <joe.hershberger@ni.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2018-07-02 19:47:48 +00:00
The eth_*() interface will be implemented by the UCLASS_ETH class
This is currently implemented in net/eth-uclass.c
dm: eth: Add basic driver model support to Ethernet stack First just add support for MAC drivers. Signed-off-by: Joe Hershberger <joe.hershberger@ni.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2015-03-22 22:09:10 +00:00
Look in include/net.h for details.
sandbox: eth: Add network support to sandbox Add basic network support to sandbox which includes a network driver. Signed-off-by: Joe Hershberger <joe.hershberger@ni.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2015-03-22 22:09:13 +00:00
net: introduce MDIO DM class for MDIO devices Adds UCLASS_MDIO DM class supporting MDIO buses that are probed as stand-alone devices. Useful in particular for systems that support DM_ETH and have a stand-alone MDIO hardware block shared by multiple Ethernet interfaces. Signed-off-by: Alex Marginean <alexm.osslist@gmail.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2019-06-03 16:10:30 +00:00
config DM_MDIO
bool "Enable Driver Model for MDIO devices"
depends on DM_ETH && PHYLIB
help
Enable driver model for MDIO devices
Adds UCLASS_MDIO DM class supporting MDIO buses that are probed as
stand-alone devices. Useful in particular for systems that support
DM_ETH and have a stand-alone MDIO hardware block shared by multiple
Ethernet interfaces.
This is currently implemented in net/mdio-uclass.c
Look in include/miiphy.h for details.
net: add MDIO_MUX DM class Adds a class for MDIO MUXes, which control access to a series of downstream child MDIOs. MDIO MUX drivers are required to implement a select function used to switch between child buses. MUX children are registered as MDIO buses and they can be used just like regular MDIOs. Signed-off-by: Alex Marginean <alexm.osslist@gmail.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2019-07-12 07:13:50 +00:00
config DM_MDIO_MUX
bool "Enable Driver Model for MDIO MUX devices"
depends on DM_MDIO
help
Enable driver model for MDIO MUX devices
Adds UCLASS_MDIO_MUX DM class supporting MDIO MUXes. Useful for
systems that support DM_MDIO and integrate one or multiple muxes on
the MDIO bus.
This is currently implemented in net/mdio-mux-uclass.c
Look in include/miiphy.h for details.
net: Introduce DSA class for Ethernet switches DSA stands for Distributed Switch Architecture and it covers switches that are connected to the CPU through an Ethernet link and generally use frame tags to pass information about the source/destination ports to/from CPU. Front panel ports are presented as regular ethernet devices in U-Boot and they are expected to support the typical networking commands. DSA switches may be cascaded, DSA class code does not currently support this. Signed-off-by: Alex Marginean <alexandru.marginean@nxp.com> Signed-off-by: Claudiu Manoil <claudiu.manoil@nxp.com> Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
2021-01-25 12:23:53 +00:00
config DM_DSA
bool "Enable Driver Model for DSA switches"
depends on DM_ETH && DM_MDIO
depends on PHY_FIXED
help
Enable driver model for DSA switches
Adds UCLASS_DSA class supporting switches that follow the Distributed
Switch Architecture (DSA). These switches rely on the presence of a
management switch port connected to an Ethernet controller capable of
receiving frames from the switch. This host Ethernet controller is
called the "master" Ethernet interface in DSA terminology.
This is currently implemented in net/dsa-uclass.c, refer to
include/net/dsa.h for API details.
test: dm: add MDIO test A very simple test for DM_MDIO, mimicks a register write/read through the sandbox bus to a dummy PHY. Signed-off-by: Alex Marginean <alexm.osslist@gmail.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Tested-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2019-06-03 16:12:28 +00:00
config MDIO_SANDBOX
depends on DM_MDIO && SANDBOX
default y
bool "Sandbox: Mocked MDIO driver"
help
This driver implements dummy read/write/reset MDIO functions mimicking
a bus with a single PHY.
This driver is used in for testing in test/dm/mdio.c
test: dm: add a test for MDIO MUX DM uclass Adds a test using a makeshift MDIO MUX. The test is based on the existing MDIO test. It uses the last emulated PHY register to verify MUX selection. Signed-off-by: Alex Marginean <alexm.osslist@gmail.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2019-07-12 07:13:53 +00:00
config MDIO_MUX_SANDBOX
depends on DM_MDIO_MUX && MDIO_SANDBOX
default y
bool "Sandbox: Mocked MDIO-MUX driver"
help
This driver implements dummy select/deselect ops mimicking a MUX on
the MDIO bux. It uses mdio_sandbox driver as parent MDIO.
This driver is used for testing in test/dm/mdio.c
net: Add eth phy generic driver for shared MDIO For dual ethernet controllers, the HW design may connect ETH phys to one MDIO ports. So two different ethernet drivers have to share MDIO bus. Since two ethernet drivers are independent, we can't ensure their probe order. To resolve this problem, introduce an eth phy generic driver and uclass. After eth-uclass binds, we search the mdio node and binds the phy node with the eth-phy-generic driver. When one eth driver get its phy device, the parent of phy device will probe prior than phy device. So this ensure the eth driver ownes the MDIO bus will be probed before using its MDIO. Signed-off-by: Ye Li <ye.li@nxp.com> Signed-off-by: Peng Fan <peng.fan@nxp.com>
2020-05-03 14:41:14 +00:00
config DM_ETH_PHY
bool "Enable Driver Model for Ethernet Generic PHY drivers"
depends on DM
help
Enable driver model for Ethernet Generic PHY .
sandbox: Add a DSA sandbox driver and unit test The DSA sandbox driver is used for unit testing the DSA class code. It implements a simple 2 port switch plus 1 CPU port, and uses a very simple tag to identify the ports. The DSA sandbox device is connected via CPU port to a regular Ethernet sandbox device, called 'dsa-test-eth, managed by the existing eth sandbox driver. The 'dsa-test-eth' is not intended for testing the eth class code however, but it is used to emulate traffic through the 'lan0' and 'lan1' front pannel switch ports. To achieve this the dsa sandbox driver registers a tx handler for the 'dsa-test-eth' device. The switch ports, labeled as 'lan0' and 'lan1', are also registered as eth devices by the dsa class code this time. So pinging through these switch ports is as easy as: => setenv ethact lan0 => ping 1.2.3.5 Unit tests for the dsa class code were also added. The 'dsa_probe' test exercises most API functions from dsa.h. The 'dsa' unit test simply exercises ARP/ICMP traffic through the two switch ports, including tag injection and extraction, with the help of the dsa sandbox driver. I took care to minimize the impact on the existing eth unit tests, though some adjustments needed to be made with the addition of extra eth interfaces used by the dsa unit tests. The additional eth interfaces also require MAC addresses, these have been added to the sandbox default environment. Signed-off-by: Alex Marginean <alexandru.marginean@nxp.com> Signed-off-by: Claudiu Manoil <claudiu.manoil@nxp.com> Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Message-Id: <20210216224804.3355044-5-olteanv@gmail.com> Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2021-03-14 12:14:57 +00:00
config DSA_SANDBOX
depends on DM_DSA && SANDBOX
default y
bool "Sandbox: Mocked DSA driver"
help
This driver implements a dummy DSA switch connected to a dummy sandbox
Ethernet device used as DSA master, to test DSA class code, including
exported DSA API and datapath processing of Ethernet traffic.
sandbox: eth: Add network support to sandbox Add basic network support to sandbox which includes a network driver. Signed-off-by: Joe Hershberger <joe.hershberger@ni.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2015-03-22 22:09:13 +00:00
menuconfig NETDEVICES
bool "Network device support"
depends on NET
Move defaults from config_cmd_default.h to Kconfig This sets the default commands Kconfig to match include/config_cmd_default.h commands in the common/Kconfig and removes them from include/configs. Signed-off-by: Joe Hershberger <joe.hershberger@ni.com> [trini: rastaban, am43xx_evm_usbhost_boot, am43xx_evm_ethboot updates] Signed-off-by: Tom Rini <trini@konsulko.com>
2015-06-22 21:15:30 +00:00
default y if DM_ETH
sandbox: eth: Add network support to sandbox Add basic network support to sandbox which includes a network driver. Signed-off-by: Joe Hershberger <joe.hershberger@ni.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2015-03-22 22:09:13 +00:00
help
You must select Y to enable any network device support
Generally if you have any networking support this is a given
If unsure, say Y
if NETDEVICES
net: Kconfig:make PHY_GIGE and individual Micrel PHYs selectable This change migrate the following configuration options for Kconfig: * PHY_GIGE, indicates that a controller (with an appropriate PHY) is Gigabit capable and enables extra support in the miiutil for parsing the status of Gigabit PHYs * adds configuration options for Micrel KSZ9021 and KSZ9031 GbE PHYs, which previously had to enabled through a board-specific config file Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2017-03-26 16:50:23 +00:00
config PHY_GIGE
bool "Enable GbE PHY status parsing and configuration"
help
Enables support for parsing the status output and for
configuring GbE PHYs (affects the inner workings of some
commands and miiphyutil.c).
net: Add ag7xxx driver for Atheros MIPS Add ethernet driver for the AR933x and AR934x Atheros MIPS machines. The driver could be easily extended to other WiSoCs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com> Cc: Joe Hershberger <joe.hershberger@ni.com> Cc: Wills Wang <wills.wang@live.com> [fixed Kconfig dependency] Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2016-05-24 21:29:09 +00:00
config AG7XXX
bool "Atheros AG7xxx Ethernet MAC support"
depends on DM_ETH && ARCH_ATH79
select PHYLIB
help
This driver supports the Atheros AG7xxx Ethernet MAC. This MAC is
present in the Atheros AR7xxx, AR9xxx and QCA9xxx MIPS chips.
net: convert altera_tse to driver model and phylib Convert altera_tse to driver model and phylib. Signed-off-by: Thomas Chou <thomas@wytron.com.tw> Reviewed-by: Marek Vasut <marex@denx.de> Reviewed-by: Simon Glass <sjg@chromium.org>
2015-10-22 07:29:11 +00:00
config ALTERA_TSE
bool "Altera Triple-Speed Ethernet MAC support"
depends on DM_ETH
select PHYLIB
help
This driver supports the Altera Triple-Speed (TSE) Ethernet MAC.
Please find details on the "Triple-Speed Ethernet MegaCore Function
Resource Center" of Altera.
net: move Broadcom SF2 driver to Kconfig move to Kconfig: CONFIG_BCM_SF2_ETH CONFIG_BCM_SF2_ETH_DEFAULT_PORT CONFIG_BCM_SF2_ETH_GMAC Also modified defconfigs of all platforms that use these configs. Signed-off-by: Suji Velupillai <suji.velupillai@broadcom.com> Tested-by: Suji Velupillai <suji.velupillai@broadcom.com> Reviewed-by: JD Zheng <jiandong.zheng@broadcom.com> Reviewed-by: Scott Branden <scott.branden@broadcom.com> Signed-off-by: Steve Rae <steve.rae@raedomain.com> Reviewed-by: Tom Rini <trini@konsulko.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2017-07-10 21:05:41 +00:00
config BCM_SF2_ETH
bool "Broadcom SF2 (Starfighter2) Ethernet support"
select PHYLIB
help
This is an abstract framework which provides a generic interface
to MAC and DMA management for multiple Broadcom SoCs such as
Cygnus, NSP and bcm28155_ap platforms.
config BCM_SF2_ETH_DEFAULT_PORT
int "Broadcom SF2 (Starfighter2) Ethernet default port number"
depends on BCM_SF2_ETH
default 0
help
Default port number for the Starfighter2 ethernet driver.
config BCM_SF2_ETH_GMAC
bool "Broadcom SF2 (Starfighter2) GMAC Ethernet support"
depends on BCM_SF2_ETH
help
This flag enables the ethernet support for Broadcom platforms with
GMAC such as Cygnus. This driver is based on the framework provided
by the BCM_SF2_ETH driver.
Say Y to any bcmcygnus based platforms.
net: add support for bcm6348-enet Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> Reviewed-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2018-12-01 18:00:24 +00:00
config BCM6348_ETH
bool "BCM6348 EMAC support"
depends on DM_ETH && ARCH_BMIPS
select DMA
select DMA_CHANNELS
select MII
select PHYLIB
help
This driver supports the BCM6348 Ethernet MAC.
net: add support for bcm6368-enet Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> Reviewed-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2018-12-01 18:00:32 +00:00
config BCM6368_ETH
bool "BCM6368 EMAC support"
depends on DM_ETH && ARCH_BMIPS
select DMA
select MII
help
This driver supports the BCM6368 Ethernet MAC.
net: Add support for Broadcom GENETv5 Ethernet controller The Broadcom GENET Ethernet MACs are used in several MIPS based SoCs and in the Broadcom 2711/2838 SoC used on the Raspberry Pi 4. There is no publicly available documentation, so this driver is based on the Linux driver. Compared to that the queue management is drastically simplified, also we only support version 5 of the IP and RGMII connections between MAC and PHY, as used on the RPi4. Signed-off-by: Amit Singh Tomar <amittomer25@gmail.com> Reviewed-by: Andre Przywara <andre.przywara@arm.com> [Andre: heavy cleanup and a few fixes] Signed-off-by: Andre Przywara <andre.przywara@arm.com> Tested-by: Corentin Labbe <clabbe@baylibre.com> Signed-off-by: Matthias Brugger <mbrugger@suse.com>
2020-01-27 01:14:42 +00:00
config BCMGENET
bool "BCMGENET V5 support"
depends on DM_ETH
select PHYLIB
help
This driver supports the BCMGENET Ethernet MAC.
net: cortina_ni: Add eth support for Cortina Access CAxxxx SoCs Add Cortina Access Ethernet device driver for CAxxxx SoCs. This driver supports both legacy and DM_ETH network models. Signed-off-by: Aaron Tseng <aaron.tseng@cortina-access.com> Signed-off-by: Alex Nemirovsky <alex.nemirovsky@cortina-access.com> Signed-off-by: Abbie Chang <abbie.chang@cortina-access.com> CC: Joe Hershberger <joe.hershberger@ni.com> CC: Abbie Chang <abbie.chang@Cortina-Access.com> CC: Tom Rini <trini@konsulko.com>
2021-01-14 21:34:11 +00:00
config CORTINA_NI_ENET
bool "Cortina-Access Ethernet driver"
depends on DM_ETH && CORTINA_PLATFORM
help
This driver supports the Cortina-Access Ethernet MAC for
all supported CAxxxx SoCs.
net: calxedagmac: Convert to DM_ETH To squash that nasty warning message and make better use of the newly gained OF_CONTROL feature, let's convert the calxedagmac driver to the "new" driver model. The conversion is pretty straight forward, mostly just adjusting the use of the involved data structures. The only actual change is the required split of the receive routine into a receive and free_pkt part. Also this allows us to get rid of the hardcoded platform information and explicit init calls. This also uses the opportunity to wrap the code decoding the MMIO register base address, to make it safe for using PHYS_64BIT later. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
2021-04-12 00:04:52 +00:00
config CALXEDA_XGMAC
bool "Calxeda XGMAC support"
depends on DM_ETH
help
This driver supports the XGMAC in Calxeda Highbank and Midway
machines.
net: dm9000: Add Kconfig entry Add Kconfig entry for the DM9000 MAC. Reviewed-by: Ramon Fried <rfried.dev@gmail.com> Signed-off-by: Marek Vasut <marex@denx.de> Cc: Joe Hershberger <joe.hershberger@ni.com> Cc: Ramon Fried <rfried.dev@gmail.com>
2022-04-13 02:15:38 +00:00
config DRIVER_DM9000
bool "Davicom DM9000 controller driver"
help
The Davicom DM9000 parallel bus external ethernet interface chip.
net: add driver for Synopsys Ethernet QoS device This driver supports the Synopsys Designware Ethernet QoS (Quality of Service) a/k/a eqos IP block, which is a different design than the HW supported by the existing designware.c driver. The IP supports many options for bus type, clocking/reset structure, and feature list. This driver currently supports the specific configuration used in NVIDIA's Tegra186 chip, but should be extensible to other combinations quite easily, as explained in the source. Signed-off-by: Stephen Warren <swarren@nvidia.com> Reviewed-by: Simon Glass <sjg@chromium.org> # V1 Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2016-10-21 20:46:47 +00:00
config DWC_ETH_QOS
bool "Synopsys DWC Ethernet QOS device support"
depends on DM_ETH
select PHYLIB
help
This driver supports the Synopsys Designware Ethernet QOS (Quality
Of Service) IP block. The IP supports many options for bus type,
net: dwc_eth_qos: add Kconfig option to select supported configuration Add configuration flag to select the supported dwc driver configuration: - CONFIG_DWC_ETH_QOS_TEGRA186 - CONFIG_DWC_ETH_QOS_IMX - CONFIG_DWC_ETH_QOS_STM32 See Linux driver ethernet/stmicro/stmmac and associated glue layers for other configuration examples. This patch removes the not-selected compatibles and lets the linker remove the unused functions to reduce the size of the driver. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2020-06-08 09:27:19 +00:00
clocking/reset structure, and feature list.
config DWC_ETH_QOS_IMX
bool "Synopsys DWC Ethernet QOS device support for IMX"
depends on DWC_ETH_QOS
help
The Synopsys Designware Ethernet QOS IP block with the specific
configuration used in IMX soc.
config DWC_ETH_QOS_STM32
bool "Synopsys DWC Ethernet QOS device support for STM32"
depends on DWC_ETH_QOS
net: dwc_eth_qos: use generic ethernet phy for stm32 variant Use the generic ethernet phy which already manages the correct binding for gpio reset, including the assert an deassert delays. Reviewed-by: Ramon Fried <rfried.dev@gmail.com> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
2021-07-20 18:09:55 +00:00
select DM_ETH_PHY
net: dwc_eth_qos: add Kconfig option to select supported configuration Add configuration flag to select the supported dwc driver configuration: - CONFIG_DWC_ETH_QOS_TEGRA186 - CONFIG_DWC_ETH_QOS_IMX - CONFIG_DWC_ETH_QOS_STM32 See Linux driver ethernet/stmicro/stmmac and associated glue layers for other configuration examples. This patch removes the not-selected compatibles and lets the linker remove the unused functions to reduce the size of the driver. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2020-06-08 09:27:19 +00:00
default y if ARCH_STM32MP
help
The Synopsys Designware Ethernet QOS IP block with the specific
configuration used in STM32MP soc.
config DWC_ETH_QOS_TEGRA186
bool "Synopsys DWC Ethernet QOS device support for TEGRA186"
depends on DWC_ETH_QOS
default y if TEGRA186
help
The Synopsys Designware Ethernet QOS IP block with specific
configuration used in NVIDIA's Tegra186 chip.
net: add driver for Synopsys Ethernet QoS device This driver supports the Synopsys Designware Ethernet QoS (Quality of Service) a/k/a eqos IP block, which is a different design than the HW supported by the existing designware.c driver. The IP supports many options for bus type, clocking/reset structure, and feature list. This driver currently supports the specific configuration used in NVIDIA's Tegra186 chip, but should be extensible to other combinations quite easily, as explained in the source. Signed-off-by: Stephen Warren <swarren@nvidia.com> Reviewed-by: Simon Glass <sjg@chromium.org> # V1 Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2016-10-21 20:46:47 +00:00
net: e1000: Add Kconfig options Add Kconfig options in preparation for moving boards to use Kconfig. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2015-08-19 15:33:41 +00:00
config E1000
bool "Intel PRO/1000 Gigabit Ethernet support"
net: e1000: Depend on CONFIG_PCI This driver depends on PCI. Update the Kconfig accordingly. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Tim Harvey <tharvey@gateworks.com> Reviewed-by: Stefan Roese <sr@denx.de> Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
2022-04-26 18:35:33 +00:00
depends on PCI
net: e1000: Add Kconfig options Add Kconfig options in preparation for moving boards to use Kconfig. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2015-08-19 15:33:41 +00:00
help
This driver supports Intel(R) PRO/1000 gigabit ethernet family of
adapters. For more information on how to identify your adapter, go
to the Adapter & Driver ID Guide at:
<http://support.intel.com/support/network/adapter/pro100/21397.htm>
config E1000_SPI_GENERIC
bool "Allow access to the Intel 8257x SPI bus"
depends on E1000
help
Allow generic access to the SPI bus on the Intel 8257x, for
example with the "sspi" command.
config E1000_SPI
bool "Enable SPI bus utility code"
depends on E1000
help
Utility code for direct access to the SPI bus on Intel 8257x.
This does not do anything useful unless you set at least one
of CONFIG_CMD_E1000 or CONFIG_E1000_SPI_GENERIC.
config CMD_E1000
bool "Enable the e1000 command"
depends on E1000
help
This enables the 'e1000' management command for E1000 devices. When
used on devices with SPI support you can reprogram the EEPROM from
U-Boot.
net: eepro100: Add Kconfig entries Add Kconfig entries for the eepro100 driver and convert various boards. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
2020-05-23 16:07:53 +00:00
config EEPRO100
bool "Intel PRO/100 82557/82559/82559ER Fast Ethernet support"
help
This driver supports Intel(R) PRO/100 82557/82559/82559ER fast
ethernet family of adapters.
sandbox: eth: Add network support to sandbox Add basic network support to sandbox which includes a network driver. Signed-off-by: Joe Hershberger <joe.hershberger@ni.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2015-03-22 22:09:13 +00:00
config ETH_SANDBOX
depends on DM_ETH && SANDBOX
default y
bool "Sandbox: Mocked Ethernet driver"
help
This driver simply responds with fake ARP replies and ping
replies that are used to verify network stack functionality
This driver is particularly useful in the test/dm/eth.c tests
sandbox: eth: Add a bridge to a real network for sandbox Implement a bridge between U-Boot's network stack and Linux's raw packet API allowing the sandbox to send and receive packets using the host machine's network interface. This raw Ethernet API requires elevated privileges. You can either run as root, or you can add the capability needed like so: sudo /sbin/setcap "CAP_NET_RAW+ep" /path/to/u-boot Signed-off-by: Joe Hershberger <joe.hershberger@ni.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2015-03-22 22:09:21 +00:00
config ETH_SANDBOX_RAW
depends on DM_ETH && SANDBOX
default y
bool "Sandbox: Bridge to Linux Raw Sockets"
help
This driver is a bridge from the bottom of the network stack
in U-Boot to the RAW AF_PACKET API in Linux. This allows real
network traffic to be tested from within sandbox. See
doc: arch: sandbox: Replace all the instances of README.sandbox commit 49116e6d236d ("doc: arch: Convert README.sandbox to reST") Moves README.sandbox to doc/arch. Replace all the existing instances to point to the right documentation file. Signed-off-by: Keerthy <j-keerthy@ti.com>
2019-07-29 08:22:04 +00:00
doc/arch/index.rst for more details.
sandbox: eth: Add a bridge to a real network for sandbox Implement a bridge between U-Boot's network stack and Linux's raw packet API allowing the sandbox to send and receive packets using the host machine's network interface. This raw Ethernet API requires elevated privileges. You can either run as root, or you can add the capability needed like so: sudo /sbin/setcap "CAP_NET_RAW+ep" /path/to/u-boot Signed-off-by: Joe Hershberger <joe.hershberger@ni.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2015-03-22 22:09:21 +00:00
Kconfig: Move CONFIG_DESIGNWARE_ETH to Kconfig Move this to Kconfig and clean up board config files that use it. Also rename it to CONFIG_ETH_DESIGNWARE to fit with the naming that exists in drivers/net/Kconfig. Signed-off-by: Simon Glass <sjg@chromium.org> Version 1: Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2015-04-05 22:07:34 +00:00
config ETH_DESIGNWARE
bool "Synopsys Designware Ethernet MAC"
net: eth_designware: select PHYLIB in Kconfig Select PHYLIB in drivers/net/Kconfig. And remove CONFIG_PHYLIB from legacy board header files. This fixed the warnings when both ALTERA_TSE and ETH_DESIGNWARE are selected. Signed-off-by: Thomas Chou <thomas@wytron.com.tw> Reported-by: Pavel Machek <pavel@denx.de> Acked-by: Chin Liang See <clsee@altera.com> Acked-by: Pavel Machek <pavel@denx.de> Tested-by: Pavel Machek <pavel@denx.de> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2015-12-07 12:53:29 +00:00
select PHYLIB
arm: socfpga: gen5 enable designware_socfpga Enable the socfpga specific designware ethernet driver by default for socfpga by implying it when enabling CONFIG_ETH_DESIGNWARE for a MACH_SOCFPGA config. This is required to remove the hacky reset and phy mode handling in arch/arm/mach-socfpga. Signed-off-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
2019-01-13 18:58:41 +00:00
imply ETH_DESIGNWARE_SOCFPGA if ARCH_SOCFPGA
Kconfig: Move CONFIG_DESIGNWARE_ETH to Kconfig Move this to Kconfig and clean up board config files that use it. Also rename it to CONFIG_ETH_DESIGNWARE to fit with the naming that exists in drivers/net/Kconfig. Signed-off-by: Simon Glass <sjg@chromium.org> Version 1: Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2015-04-05 22:07:34 +00:00
help
This MAC is present in SoCs from various vendors. It supports
100Mbit and 1 Gbit operation. You must enable CONFIG_PHYLIB to
provide the PHY (physical media interface).
net: designware: add Amlogic Meson8b & later glue driver This adds a proper glue driver for the Designware DWMAC ethernet MAC IP found in the Amlogic Meson8, GXBB, GXL, GXM, G12A, G12B & SM1 SoCs. This is aimed to replace the static ethernet link setup found on the board init code for the Amlogic SoC based boards. Tested on a libretech-cc (S905x Internal RMII 10/100 PHY) and Khadas VIM3 (A113d with external 10/100/1000 RGMII PHY) to cover the most extreme setups. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2021-02-24 19:33:56 +00:00
config ETH_DESIGNWARE_MESON8B
bool "Amlogic Meson8b and later glue driver for Synopsys Designware Ethernet MAC"
depends on DM_ETH
select ETH_DESIGNWARE
help
This provides glue layer to use Synopsys Designware Ethernet MAC
present on the Amlogic Meson8b, GX, AXG & G12A SoCs.
net: designware: socfpga: Add Arria10 extras Add wrapper around the designware MAC driver to handle the SoCFPGA specific configuration bits. On Arria10, this is configuration of syscon phy_intf. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Chin Liang See <chin.liang.see@intel.com> Cc: Dinh Nguyen <dinguyen@kernel.org> Cc: Ley Foon Tan <ley.foon.tan@intel.com> Cc: Joe Hershberger <joe.hershberger@ni.com>
2018-08-13 17:32:14 +00:00
config ETH_DESIGNWARE_SOCFPGA
net: designware: socfpga: adapt to Gen5 This driver was written for Arria10, but it applies to Gen5, too. The main difference is that Gen5 has 2 MACs (Arria10 has 3) and the syscon bits are encoded in the same register, thus an offset is needed. This offset is already read from the devicetree, but for Arria10 it is always 0, which is probably why it has been ignored. By using this offset when writing the phy mode into the syscon regiter, we can use this driver to set the phy mode for both of the MACs on Gen5. Since the PHY mode bits in sysmgr are the same even for Stratix10, let's drop the detection of the sub-mach by checking compatible version and just use the same code for all FPGAs. To work correctly, this driver depends on SYSCON and REGMAP, so select those via Kconfig when it is enabeld. Tested on socfpga_socrates (where the 2nd MAC is connected, so a shift offset is required). Signed-off-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
2019-01-13 18:58:40 +00:00
select REGMAP
select SYSCON
net: designware: socfpga: Add Arria10 extras Add wrapper around the designware MAC driver to handle the SoCFPGA specific configuration bits. On Arria10, this is configuration of syscon phy_intf. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Chin Liang See <chin.liang.see@intel.com> Cc: Dinh Nguyen <dinguyen@kernel.org> Cc: Ley Foon Tan <ley.foon.tan@intel.com> Cc: Joe Hershberger <joe.hershberger@ni.com>
2018-08-13 17:32:14 +00:00
bool "Altera SoCFPGA extras for Synopsys Designware Ethernet MAC"
depends on DM_ETH && ETH_DESIGNWARE
help
The Altera SoCFPGA requires additional configuration of the
Altera system manager to correctly interface with the PHY.
This code handles those SoC specifics.
net: designware: s700: Add glue code for S700 mac This patchs adds glue logic to enable designware mac present on Action Semi based S700 SoC, Configures SoC specific bits. Undocumented bit that programs the PHY interface select register comes from vendor source. It has been tested on Cubieboard7-lite based on S700 SoC. Signed-off-by: Amit Singh Tomar <amittomer25@gmail.com>
2020-05-09 14:25:12 +00:00
config ETH_DESIGNWARE_S700
bool "Actins S700 glue driver for Synopsys Designware Ethernet MAC"
depends on DM_ETH && ETH_DESIGNWARE
help
This provides glue layer to use Synopsys Designware Ethernet MAC
present on Actions S700 SoC.
net/ethoc: add Kconfig entry for the driver Add Kconfig entry for the driver, remove #define CONFIG_ETHOC from the only board configuration that uses it and put it into that board's defconfig. Cc: Stefan Kristiansson <stefan.kristiansson@saunalahti.fi> Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2016-08-05 15:26:15 +00:00
config ETHOC
bool "OpenCores 10/100 Mbps Ethernet MAC"
help
This MAC is present in OpenRISC and Xtensa XTFPGA boards.
net: fec: sharing MDIO for two enet controllers On i.MX6SX, 6UL and 7D, there are two enet controllers each has a MDIO port. But Some boards share one MDIO port for the two enets. So introduce a configuration CONFIG_FEC_MXC_MDIO_BASE to indicate the MDIO port for sharing. In Kconfig, user needs enable CONFIG_FEC_MXC_SHARE_MDIO first to enter the CONFIG_FEC_MXC_MDIO_BASE. To i.MX28, adapt to use the new config Signed-off-by: Peng Fan <peng.fan@nxp.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com> Cc: Fabio Estevam <fabio.estevam@nxp.com>
2018-03-28 12:54:14 +00:00
config FEC_MXC_SHARE_MDIO
bool "Share the MDIO bus for FEC controller"
depends on FEC_MXC
config FEC_MXC_MDIO_BASE
hex "MDIO base address for the FEC controller"
depends on FEC_MXC_SHARE_MDIO
help
This specifies the MDIO registers base address. It is used when
two FEC controllers share MDIO bus.
net: Kconfig: Add FEC_MXC entry Added kconfig for FEC_MXC driver. Cc: Joe Hershberger <joe.hershberger@gmail.com> Cc: Simon Glass <sjg@chromium.org> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Peng Fan <peng.fan@nxp.com> Cc: Matteo Lisi <matteo.lisi@engicam.com> Cc: Michael Trimarchi <michael@amarulasolutions.com> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2016-10-08 12:30:12 +00:00
config FEC_MXC
bool "FEC Ethernet controller"
net: fec_mxc: support i.MX8ULP Support i.MX8ULP in fec_mxc Signed-off-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
2021-08-07 08:00:42 +00:00
depends on MX28 || MX5 || MX6 || MX7 || IMX8 || IMX8M || IMX8ULP || VF610
net: Kconfig: Add FEC_MXC entry Added kconfig for FEC_MXC driver. Cc: Joe Hershberger <joe.hershberger@gmail.com> Cc: Simon Glass <sjg@chromium.org> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Peng Fan <peng.fan@nxp.com> Cc: Matteo Lisi <matteo.lisi@engicam.com> Cc: Michael Trimarchi <michael@amarulasolutions.com> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2016-10-08 12:30:12 +00:00
help
This driver supports the 10/100 Fast Ethernet controller for
NXP i.MX processors.
configs: Migrate CONFIG_FMAN_ENET and some related options to Kconfig Move the main symbol for Freescale Fman Ethernet controller option to Kconfig. Also migrate the CONFIG_SYS_QE_FMAN_FW_IN_xxx macros and rename the SPIFLASH one to follow the same format as all of the others. To do this fully we need to migrate CONFIG_QC, do so. Signed-off-by: Tom Rini <trini@konsulko.com>
2019-05-12 11:59:12 +00:00
config FMAN_ENET
bool "Freescale FMan ethernet support"
depends on ARM || PPC
help
This driver support the Freescale FMan Ethernet controller
configs: fsl: migrate FMAN/QE specific defines to Kconfig Use moveconfig.py script to convert CONFIG_SYS_FMAN_FW_ADDR, CONFIG_SYS_QE_FW_ADDR and CONFIG_SYS_QE_FMAN_FW_LENGTH to Kconfig and move these entries to defconfigs. Signed-off-by: Rajesh Bhagat <rajesh.bhagat@nxp.com> [Rebased] Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
2021-11-09 11:00:38 +00:00
config SYS_FMAN_FW_ADDR
hex "FMAN Firmware Address"
depends on FMAN_ENET
default 0x0
config SYS_QE_FMAN_FW_LENGTH
hex "FMAN QE Firmware length"
depends on FMAN_ENET || QE || U_QE
default 0x10000
Merge branch 'master' of git://git.denx.de/u-boot-nds32 Move FTMAC100 to where it should be, alphabetically in drivers/net/Kconfig Signed-off-by: Tom Rini <trini@konsulko.com> Conflicts: drivers/net/Kconfig
2017-05-26 15:18:53 +00:00
config FTMAC100
bool "Ftmac100 Ethernet Support"
help
This MAC is present in Andestech SoCs.
net: ftgmac100: convert to driver model The driver is based on the previous one and the code is only adapted to fit the driver model. The support for the Faraday ftgmac100 controller is the same with MAC and MDIO bus support for RGMII/RMII modes. Configuration is updated to enable compile again. At this stage, the driver compiles but is not yet functional. Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Joel Stanley <joel@jms.id.au> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2018-10-29 06:06:31 +00:00
config FTGMAC100
bool "Ftgmac100 Ethernet Support"
depends on DM_ETH
select PHYLIB
help
This driver supports the Faraday's FTGMAC100 Gigabit SoC
Ethernet controller that can be found on Aspeed SoCs (which
include NCSI).
It is fully compliant with IEEE 802.3 specification for
10/100 Mbps Ethernet and IEEE 802.3z specification for 1000
Mbps Ethernet and includes Reduced Media Independent
Interface (RMII) and Reduced Gigabit Media Independent
Interface (RGMII) interfaces. It adopts an AHB bus interface
and integrates a link list DMA engine with direct M-Bus
accesses for transmitting and receiving packets. It has
independent TX/RX fifos, supports half and full duplex (1000
Mbps mode only supports full duplex), flow control for full
duplex and backpressure for half duplex.
The FTGMAC100 also implements IP, TCP, UDP checksum offloads
and supports IEEE 802.1Q VLAN tag insertion and removal. It
offers high-priority transmit queue for QoS and CoS
applications.
drivers: net: add mcf fec dm Kconfig support Add ColdFire fec to Kconfig. Signed-off-by: Angelo Durgehello <angelo.dureghello@timesys.com>
2019-11-15 22:54:17 +00:00
config MCFFEC
bool "ColdFire Ethernet Support"
depends on DM_ETH
select PHYLIB
help
This driver supports the network interface units in the
ColdFire family.
config FSLDMAFEC
bool "ColdFire DMA Ethernet Support"
depends on DM_ETH
select PHYLIB
help
This driver supports the network interface units in the
ColdFire family.
net: ks8851: Add Kconfig entries Convert CONFIG_KS8851_MLL and CONFIG_KS8851_MLL_BASEADDR to Kconfig Signed-off-by: Marek Vasut <marex@denx.de> Cc: Eugen Hristev <eugen.hristev@microchip.com> Cc: Joe Hershberger <joe.hershberger@ni.com>
2020-03-25 18:08:59 +00:00
config KS8851_MLL
bool "Microchip KS8851-MLL controller driver"
help
The Microchip KS8851 parallel bus external ethernet interface chip.
if KS8851_MLL
if !DM_ETH
config KS8851_MLL_BASEADDR
hex "Microchip KS8851-MLL Base Address"
help
Define this to hold the physical address of the device (I/O space)
endif #DM_ETH
endif #KS8851_MLL
net: add support for KSZ9477/KSZ9897/KSZ9567 GbE switch The Microchip KSZ9477/KSZ9897/KSZ9567 7-Port Gigabit Ethernet Switches support SGMII/RGMII/MII/RMII with register access via SPI, I2C, or MDIO. This driver currently supports I2C register access but SPI or MDIO register access can be easily added at a later time. Tagging is not implemented and instead the active port is tracked to avoid needing a tag to store port information. This was tested with the imx8mm-venice-gw7901 board which has a KSZ9897S switch with an IMX8MM FEC MAC master connected via RGMII_ID. Signed-off-by: Tim Harvey <tharvey@gateworks.com> Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
2021-06-30 23:50:08 +00:00
config KSZ9477
bool "Microchip KSZ9477 I2C controller driver"
depends on DM_DSA && DM_I2C
help
This driver implements a DSA switch driver for the KSZ9477 family
of GbE switches using the I2C interface.
Convert CONFIG_LPC32XX_ETH to Kconfig This converts the following to Kconfig: CONFIG_LPC32XX_ETH Cc: Ramon Fried <rfried.dev@gmail.com> Signed-off-by: Tom Rini <trini@konsulko.com>
2022-03-18 12:38:24 +00:00
config LPC32XX_ETH
bool "LPC32xx Ethernet MAC interface driver"
depends on ARCH_LPC32XX
default y
net: add Kconfig for MVGBE Add Kconfig for MVGBE and update boards to select this. Signed-off-by: Chris Packham <judge.packham@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
2018-05-03 11:00:35 +00:00
config MVGBE
bool "Marvell Orion5x/Kirkwood network interface support"
rename symbol: CONFIG_KIRKWOOD -> CONFIG_ARCH_KIRKWOOD Have this symbol follow the pattern of all other such symbols. This patch also removes a TODO from the code. Reviewed-by: Chris Packham <judge.packham@gmail.com> Signed-off-by: Trevor Woerner <twoerner@gmail.com>
2020-05-06 12:02:40 +00:00
depends on ARCH_KIRKWOOD || ARCH_ORION5X
net: mvgbe: convert to DM Add driver model support to the mvgbe driver. As a temporary measure both DM and non-DM uses are supported. Once all the users have been converted the non-DM support can be dropped. Signed-off-by: Chris Packham <judge.packham@gmail.com> Tested-by: Michael Walle <michael@walle.cc> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2018-07-09 09:34:00 +00:00
select PHYLIB if DM_ETH
net: add Kconfig for MVGBE Add Kconfig for MVGBE and update boards to select this. Signed-off-by: Chris Packham <judge.packham@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
2018-05-03 11:00:35 +00:00
help
This driver supports the network interface units in the
Marvell Orion5x and Kirkwood SoCs
ARM: mvebu: Convert CONFIG_MVNETA to Kconfig This converts the following to Kconfig: CONFIG_MVNETA Signed-off-by: Chris Packham <judge.packham@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Stefan Roese <sr@denx.de>
2017-08-21 08:17:03 +00:00
config MVNETA
ARM: mvebu: Allow MVNETA to be selected with Armada 3700 SoCs Until now, Armada 3700 SoCs could not enable the mvneta driver, and thus did not benefit from Ethernet support. Add ARMADA_3700 in the "depends on" list of the MVNETA Kconfig entry. Signed-off-by: Miquel Raynal <miquel.raynal@free-electrons.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Stefan Roese <sr@denx.de>
2017-12-28 14:43:09 +00:00
bool "Marvell Armada XP/385/3700 network interface support"
depends on ARMADA_XP || ARMADA_38X || ARMADA_3700
ARM: mvebu: Convert CONFIG_MVNETA to Kconfig This converts the following to Kconfig: CONFIG_MVNETA Signed-off-by: Chris Packham <judge.packham@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Stefan Roese <sr@denx.de>
2017-08-21 08:17:03 +00:00
select PHYLIB
net: mvneta: Use DM MDIO API for connecting PHY Use the modern DM MDIO API for connecting PHY in the mvneta driver. This requires enabling MVMDIO driver in several config files. Signed-off-by: Marek Behún <marek.behun@nic.cz> Reviewed-by: Ramon Fried <rfried.dev@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
2022-04-27 10:41:46 +00:00
select DM_MDIO
ARM: mvebu: Convert CONFIG_MVNETA to Kconfig This converts the following to Kconfig: CONFIG_MVNETA Signed-off-by: Chris Packham <judge.packham@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Stefan Roese <sr@denx.de>
2017-08-21 08:17:03 +00:00
help
This driver supports the network interface units in the
ARM: mvebu: Allow MVNETA to be selected with Armada 3700 SoCs Until now, Armada 3700 SoCs could not enable the mvneta driver, and thus did not benefit from Ethernet support. Add ARMADA_3700 in the "depends on" list of the MVNETA Kconfig entry. Signed-off-by: Miquel Raynal <miquel.raynal@free-electrons.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Stefan Roese <sr@denx.de>
2017-12-28 14:43:09 +00:00
Marvell ARMADA XP, ARMADA 38X and ARMADA 3700 SoCs
ARM: mvebu: Convert CONFIG_MVNETA to Kconfig This converts the following to Kconfig: CONFIG_MVNETA Signed-off-by: Chris Packham <judge.packham@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Stefan Roese <sr@denx.de>
2017-08-21 08:17:03 +00:00
net: mvpp2.c: Add Marvell mvpp2 network driver for Armada 375 This patch adds support for the mvpp2 ethernet controller which is integrated in the Marvell Armada 375 SoC. This port is based on the Linux driver (v4.4), which has been stripped of the in U-Boot unused portions. Tested on the Marvell Armada 375 eval board db-88f6720. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Luka Perkov <luka.perkov@sartura.hr> Acked-by: Joe Hershberger <joe.hershberger@gmail.com>
2016-02-10 06:22:10 +00:00
config MVPP2
net: mvpp2: Enable compilation for Armada 7K/8K platforms Since Armada 7K/8K is also equipped with a newer version of the MVPP2 ethernet controller, lets enable compilation of this driver for these platforms. Signed-off-by: Stefan Roese <sr@denx.de> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2017-02-15 10:42:59 +00:00
bool "Marvell Armada 375/7K/8K network interface support"
depends on ARMADA_375 || ARMADA_8K
net: mvpp2.c: Add Marvell mvpp2 network driver for Armada 375 This patch adds support for the mvpp2 ethernet controller which is integrated in the Marvell Armada 375 SoC. This port is based on the Linux driver (v4.4), which has been stripped of the in U-Boot unused portions. Tested on the Marvell Armada 375 eval board db-88f6720. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Luka Perkov <luka.perkov@sartura.hr> Acked-by: Joe Hershberger <joe.hershberger@gmail.com>
2016-02-10 06:22:10 +00:00
select PHYLIB
net: mvpp2: MVPP2 now needs MVMDIO Changes to mvpp2.c require the MVMDIO module which in turn uses DM_MDIO. Signed-off-by: Nevo Hed <nhed+github@starry.com> Reviewed-by: Ramon Fried <rfried.dev@gmail.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2019-08-15 22:08:45 +00:00
select MVMDIO
select DM_MDIO
net: mvpp2.c: Add Marvell mvpp2 network driver for Armada 375 This patch adds support for the mvpp2 ethernet controller which is integrated in the Marvell Armada 375 SoC. This port is based on the Linux driver (v4.4), which has been stripped of the in U-Boot unused portions. Tested on the Marvell Armada 375 eval board db-88f6720. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Luka Perkov <luka.perkov@sartura.hr> Acked-by: Joe Hershberger <joe.hershberger@gmail.com>
2016-02-10 06:22:10 +00:00
help
This driver supports the network interface units in the
net: mvpp2: Enable compilation for Armada 7K/8K platforms Since Armada 7K/8K is also equipped with a newer version of the MVPP2 ethernet controller, lets enable compilation of this driver for these platforms. Signed-off-by: Stefan Roese <sr@denx.de> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2017-02-15 10:42:59 +00:00
Marvell ARMADA 375, 7K and 8K SoCs.
net: mvpp2.c: Add Marvell mvpp2 network driver for Armada 375 This patch adds support for the mvpp2 ethernet controller which is integrated in the Marvell Armada 375 SoC. This port is based on the Linux driver (v4.4), which has been stripped of the in U-Boot unused portions. Tested on the Marvell Armada 375 eval board db-88f6720. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Luka Perkov <luka.perkov@sartura.hr> Acked-by: Joe Hershberger <joe.hershberger@gmail.com>
2016-02-10 06:22:10 +00:00
net: Kconfig: Add CONFIG_MACB option Add CONFIG_MACB option in KConfig to be used to select the Cadence MACB Ethernet driver. Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com>
2016-11-02 02:06:55 +00:00
config MACB
bool "Cadence MACB/GEM Ethernet Interface"
select PHYLIB
help
The Cadence MACB ethernet interface is found on many Atmel
AT91 and SAMA5 parts. This driver also supports the Cadence
GEM (Gigabit Ethernet MAC) found in some ARM SoC devices.
Say Y to include support for the MACB/GEM chip.
net: macb: Add support for Xilinx Zynq SoC Although Xilinx Zynq SoC was using MACB similar hardware. However, U-boot MACB driver was not supporting Xilinx Zynq SoC. This patch is to add support for the Xilinx Zynq SoC to the existing MACB network driver. This patch is to add Zynq GEM DMA Config, provide callback function for different linkspeed for case of using Xilinx Zynq Programmable Logic as GMII to RGMII converter. This patch convert the return value to use error codes. Signed-off-by: Wilson Lee <wilson.lee@ni.com> Cc: Chen Yee Chew <chen.yee.chew@ni.com> Cc: Keng Soon Cheah <keng.soon.cheah@ni.com> Cc: Joe Hershberger <joe.hershberger@ni.com> Cc: Wenyou Yang <wenyou.yang@atmel.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2017-08-23 03:25:07 +00:00
config MACB_ZYNQ
bool "Cadence MACB/GEM Ethernet Interface for Xilinx Zynq"
depends on MACB
help
The Cadence MACB ethernet interface was used on Zynq platform.
Say Y to enable support for the MACB/GEM in Zynq chip.
net: add ethernet driver for MediaTek MT7620 SoC This patch adds ethernet driver for MediaTek MT7620 SoC. The MT7620 SoC has a built-in ethernet (Frame Engine) and a built-in 7-port switch and two xMII interfaces (can be MII/RMII/RGMII). The port 0-3 of the switch connects to intergrited FE PHYs. Port 4 can be configured to connect to either the intergrited FE PHY, or the xMII. Port 5 always connects to the xMII. Port 6 is the CPU port. This driver supports MT7530 giga switch connects to port 5. Reviewed-by: Stefan Roese <sr@denx.de> Signed-off-by: Weijie Gao <weijie.gao@mediatek.com>
2020-11-12 08:36:53 +00:00
config MT7620_ETH
bool "MediaTek MT7620 Ethernet Interface"
depends on SOC_MT7620
select PHYLIB
select DM_RESET
select DM_GPIO
select CLK
help
The MediaTek MT7620 ethernet interface is used on MT7620 based
boards. It has a built-in switch with two configurable ports which
can connect to external PHY/MACs.
net: Add MT7628 ethernet driver This patch adds ethernet support for the MIPS based Mediatek MT76xx SoCs (e.g. MT7628 and MT7688), including a minimum setup of the integrated switch. This driver is loosly based on the driver version included in this MediaTek github repository: https://github.com/MediaTek-Labs/linkit-smart-uboot.git Tested on the MT7688 LinkIt smart-gateway and on the Gardena-smart-gateway. Signed-off-by: Stefan Roese <sr@denx.de> Reviewed-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com> Cc: Joe Hershberger <joe.hershberger@ni.com> Cc: Frank Wunderlich <frankwu@gmx.de> Cc: Weijie Gao <hackpascal@gmail.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2018-10-26 12:53:27 +00:00
config MT7628_ETH
bool "MediaTek MT7628 Ethernet Interface"
mips: rename mach-mt7620 to mach-mtmips Currently mach-mt7620 contains only support for mt7628. To avoid confusion, rename mach-mt7620 to mach-mtmips, which means MediaTek MIPS platforms. MT7620 and MT7628 should be distinguished by SOC_MT7620 and SOC_MT7628 because they do not share the same lowlevel codes. Dependencies of four drivers are changed to SOC_MT7628 as these drivers are only used by MT7628. Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de> Signed-off-by: Weijie Gao <weijie.gao@mediatek.com>
2019-04-30 03:13:58 +00:00
depends on SOC_MT7628
net: mt7628-eth: make phy link up detection optional via DT The mt7628 has an embedded ethernet switch (5 phy ports + 1 cpu port). Although in IOT mode only port0 is usable, the phy0 is still connected to the switch, not the ethernet gmac directly. This patch rewrites it and makes it optional. It can be turned on by adding mediatek,poll-link-phy = <?> explicitly into the eth node. By default the driver is switch mode with all 5 phy ports working without link detection. Signed-off-by: Weijie Gao <weijie.gao@mediatek.com>
2019-09-25 09:45:33 +00:00
select PHYLIB
net: Add MT7628 ethernet driver This patch adds ethernet support for the MIPS based Mediatek MT76xx SoCs (e.g. MT7628 and MT7688), including a minimum setup of the integrated switch. This driver is loosly based on the driver version included in this MediaTek github repository: https://github.com/MediaTek-Labs/linkit-smart-uboot.git Tested on the MT7688 LinkIt smart-gateway and on the Gardena-smart-gateway. Signed-off-by: Stefan Roese <sr@denx.de> Reviewed-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com> Cc: Joe Hershberger <joe.hershberger@ni.com> Cc: Frank Wunderlich <frankwu@gmx.de> Cc: Weijie Gao <hackpascal@gmail.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2018-10-26 12:53:27 +00:00
help
The MediaTek MT7628 ethernet interface is used on MT7628 and
MT7688 based boards.
net: Add ethernet support for MIPS Octeon This patchs adds the ethernet & MDIO driver for the MIPS Octeon II / III SoC platform. Please note that these drivers are based on the 2013 U-Boot version from Marvell and make use of the platform supported helper functions for the ethernet functionality, including stuff like SFP handling. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Ramon Fried <rfried.dev@gmail.com> Cc: Joe Hershberger <joe.hershberger@ni.com>
2022-04-07 07:11:52 +00:00
config NET_OCTEON
bool "MIPS Octeon ethernet support"
depends on ARCH_OCTEON
help
You must select Y to enable network device support for
MIPS Octeon SoCs. If unsure, say n
net: Add NIC controller driver for OcteonTX Adds support for Network Interface controllers found on OcteonTX SoC platforms. Signed-off-by: Suneel Garapati <sgarapati@marvell.com> Signed-off-by: Stefan Roese <sr@denx.de> Cc: Joe Hershberger <joe.hershberger@ni.com>
2020-08-26 12:37:33 +00:00
config NET_OCTEONTX
bool "OcteonTX Ethernet support"
depends on ARCH_OCTEONTX
depends on PCI_SRIOV
help
You must select Y to enable network device support for
OcteonTX SoCs. If unsure, say n
net: Add NIC controller driver for OcteonTX2 Adds support for Network Interface controllers found on OcteonTX2 SoC platforms. Signed-off-by: Suneel Garapati <sgarapati@marvell.com> Signed-off-by: Stefan Roese <sr@denx.de> Cc: Joe Hershberger <joe.hershberger@ni.com>
2020-08-26 12:37:42 +00:00
config NET_OCTEONTX2
bool "OcteonTX2 Ethernet support"
depends on ARCH_OCTEONTX2
select OCTEONTX2_CGX_INTF
help
You must select Y to enable network device support for
OcteonTX2 SoCs. If unsure, say n
net: Add NIC controller driver for OcteonTX Adds support for Network Interface controllers found on OcteonTX SoC platforms. Signed-off-by: Suneel Garapati <sgarapati@marvell.com> Signed-off-by: Stefan Roese <sr@denx.de> Cc: Joe Hershberger <joe.hershberger@ni.com>
2020-08-26 12:37:33 +00:00
config OCTEONTX_SMI
bool "OcteonTX SMI Device support"
depends on ARCH_OCTEONTX || ARCH_OCTEONTX2
help
You must select Y to enable SMI controller support for
OcteonTX or OcteonTX2 SoCs. If unsure, say n
net: Add NIC controller driver for OcteonTX2 Adds support for Network Interface controllers found on OcteonTX2 SoC platforms. Signed-off-by: Suneel Garapati <sgarapati@marvell.com> Signed-off-by: Stefan Roese <sr@denx.de> Cc: Joe Hershberger <joe.hershberger@ni.com>
2020-08-26 12:37:42 +00:00
config OCTEONTX2_CGX_INTF
bool "OcteonTX2 CGX ATF interface support"
depends on ARCH_OCTEONTX2
default y if ARCH_OCTEONTX2
help
You must select Y to enable CGX ATF interface support for
OcteonTX2 SoCs. If unsure, say n
net: pch_gbe: Add Kconfig option Add Kconfig option in preparation for moving board to use Kconfig. Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
2015-08-28 05:25:58 +00:00
config PCH_GBE
bool "Intel Platform Controller Hub EG20T GMAC driver"
pci: Drop DM_PCI This option has not effect now. Drop it, using PCI instead where needed. Signed-off-by: Simon Glass <sjg@chromium.org>
2021-08-02 00:54:44 +00:00
depends on DM_ETH
net: pch_gbe: Add Kconfig option Add Kconfig option in preparation for moving board to use Kconfig. Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
2015-08-28 05:25:58 +00:00
select PHYLIB
help
This MAC is present in Intel Platform Controller Hub EG20T. It
supports 10/100/1000 Mbps operation.
sunxi: Convert CONFIG_RGMII to Kconfig Convert CONFIG_RGMII to Kconfig. Thanks to that, it is possible to update defconfig files of SYS_EXTRA_OPTIONS accordingly and remove it when it is possible. Signed-off-by: Mylène Josserand <mylene.josserand@free-electrons.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2017-04-02 10:59:08 +00:00
config RGMII
bool "Enable RGMII"
help
Enable the support of the Reduced Gigabit Media-Independent
Interface (RGMII).
Convert CONFIG_MII et al to Kconfig This converts the following to Kconfig: CONFIG_MII CONFIG_DRIVER_TI_EMAC Signed-off-by: Adam Ford <aford173@gmail.com> Acked-by: Jagan Teki <jagan@amarulasolutions.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2018-07-21 04:03:57 +00:00
config MII
bool "Enable MII"
help
Enable support of the Media-Independent Interface (MII)
Convert CONFIG_RMII to Kconfig This converts the following to Kconfig: CONFIG_RMII Cc: Ramon Fried <rfried.dev@gmail.com> Signed-off-by: Tom Rini <trini@konsulko.com>
2022-03-18 12:38:22 +00:00
config RMII
bool "Enable RMII"
help
Enable support of the Reduced Media-Independent Interface (MII)
net: pcnet: Add Kconfig entries Add Kconfig entries for the pcnet driver and convert MIPS malta to use those. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com> Cc: Joe Hershberger <joe.hershberger@ni.com>
2020-05-17 16:14:17 +00:00
config PCNET
bool "AMD PCnet series Ethernet controller driver"
help
This driver supports AMD PCnet series fast ethernet family of
PCI chipsets/adapters.
net, qe: add DM support for QE UEC ethernet add DM/DTS support for the UEC ethernet on QUICC Engine Block. Signed-off-by: Heiko Schocher <hs@denx.de> Patch-cc: Mario Six <mario.six@gdsys.cc> Patch-cc: Qiang Zhao <qiang.zhao@nxp.com> Patch-cc: Holger Brunck <holger.brunck@hitachi-powergrids.com> Patch-cc: Madalin Bucur <madalin.bucur@oss.nxp.com> Series-changes: 3 - revert: commit "3374264df97b" ("drivers: net: qe: deselect QE when DM_ETH is enabled") as now qe works with DM and DM_ETH support. - fix mailaddress from Holger Series-changes: 2 - add comments from Qiang Zhao: - add device node documentation - I did not drop the dm_qe_uec_phy.c and use drivers/net/fsl_mdio.c because using drivers/net/fsl_mdio.c leads in none existent udevice mdio@3320 instead boards with DM ETH support should use now this driver. - remove RFC tag Commit-notes: - I let the old none DM based implementation in code so boards should work with old implementation. This Code should be removed if all boards are converted to DM/DTS. - add the DM based qe uec driver under drivers/net/qe - Therefore copied the files uccf.c uccf.h uec.h from drivers/qe. So there are a lot of Codingstyle problems currently. I fix them in next version if this RFC patch is OK or it needs some changes. - The dm based driver code is now under drivers/net/qe/dm_qe_uec.c Used a lot of functions from drivers/qe/uec.c - seperated the PHY specific code into seperate file drivers/net/qe/dm_qe_uec_phy.c END
2020-02-06 08:48:16 +00:00
source "drivers/net/qe/Kconfig"
net: Move CONFIG_RTL8139 to Kconfig Introduce CONFIG_RTL8139 in Kconfig and move over boards' defconfig to use that. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com> [trini: Fixup MPC8641HPCN* and r2dplus configs] Signed-off-by: Tom Rini <trini@konsulko.com>
2016-03-21 13:47:41 +00:00
config RTL8139
bool "Realtek 8139 series Ethernet controller driver"
help
This driver supports Realtek 8139 series fast ethernet family of
PCI chipsets/adapters.
net: Move CONFIG_RTL8169 to Kconfig Introduce CONFIG_RTL8169 in Kconfig and move over boards' defconfig to use that. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Stephen Warren <swaren@nvidia.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2016-03-21 13:47:42 +00:00
config RTL8169
bool "Realtek 8169 series Ethernet controller driver"
help
This driver supports Realtek 8169 series gigabit ethernet family of
PCI/PCIe chipsets/adapters.
net: dsa: add driver for NXP SJA1105 L2 switch The SJA1105 driver is largely reused from Linux. Its programming model is that it is blank out of reset, and it waits for a static configuration stream over SPI, which contains all runtime parameters (it has no notion of "default values"). Keeping a binary array for the configuration stream would have meant that aspects such as the CPU port and the MAC speeds could have not been configured easily, and would have been static and board-dependent. Live-patching the binary array means recalculating the static config table CRCs, which is not a fun process. So we create an abstraction over the static config tables, using the packing API, same as in Linux. The tables are kept as C structures, and the binary configuration stream is constructed on-the-go, with CRC and all. All static config tables instantiated in this driver are mandatory. The hardware reference manual can be found at: https://www.nxp.com/docs/en/user-guide/UM10944.pdf For tagging, a simplified version of tag_8021q from Linux is used. The VLAN EtherType is the same (0xdadb) but since we don't want switching in U-Boot, there is no reason to have a TX VLAN and an RX VLAN for each port. We just need the RX VLANs to act as the unique pvid of each front-panel port, to decode the switch port number. The RX VLAN is used for both RX and TX. The device tree bindings are the same as in Linux. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
2021-09-29 15:04:41 +00:00
config SJA1105
bool "NXP SJA1105 Ethernet switch family driver"
depends on DM_DSA && DM_SPI
select BITREVERSE
help
This is the driver for the NXP SJA1105 automotive Ethernet switch
family. These are 5-port devices and are managed over an SPI
interface. Probing is handled based on OF bindings. The driver
supports the following revisions:
- SJA1105E (Gen. 1, No TT-Ethernet)
- SJA1105T (Gen. 1, TT-Ethernet)
- SJA1105P (Gen. 2, No SGMII, No TT-Ethernet)
- SJA1105Q (Gen. 2, No SGMII, TT-Ethernet)
- SJA1105R (Gen. 2, SGMII, No TT-Ethernet)
- SJA1105S (Gen. 2, SGMII, TT-Ethernet)
net: Add SMC911X driver to Kconfig, convert We add the various SMC91XX symbols to drivers/net/Kconfig and then this converts the following to Kconfig: CONFIG_SMC911X CONFIG_SMC911X_BASE CONFIG_SMC911X_16_BIT CONFIG_SMC911X_32_BIT Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Apply to the rest of the tree, re-squash old and new patch] Signed-off-by: Tom Rini <trini@konsulko.com>
2017-09-05 20:20:44 +00:00
config SMC911X
bool "SMSC LAN911x and LAN921x controller driver"
if SMC911X
net: smc911x: Add DM support Add support for U-Boot DM and DT probing. Furthermore, build the SMC911x standalone EEPROM example only for the non-DM case, as it is not converted yet. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Joe Hershberger <joe.hershberger@ni.com> Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
2020-03-15 16:39:01 +00:00
if !DM_ETH
net: Add SMC911X driver to Kconfig, convert We add the various SMC91XX symbols to drivers/net/Kconfig and then this converts the following to Kconfig: CONFIG_SMC911X CONFIG_SMC911X_BASE CONFIG_SMC911X_16_BIT CONFIG_SMC911X_32_BIT Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Apply to the rest of the tree, re-squash old and new patch] Signed-off-by: Tom Rini <trini@konsulko.com>
2017-09-05 20:20:44 +00:00
config SMC911X_BASE
hex "SMC911X Base Address"
help
Define this to hold the physical address
of the device (I/O space)
net: smc911x: Add DM support Add support for U-Boot DM and DT probing. Furthermore, build the SMC911x standalone EEPROM example only for the non-DM case, as it is not converted yet. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Joe Hershberger <joe.hershberger@ni.com> Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
2020-03-15 16:39:01 +00:00
endif #DM_ETH
net: Add SMC911X driver to Kconfig, convert We add the various SMC91XX symbols to drivers/net/Kconfig and then this converts the following to Kconfig: CONFIG_SMC911X CONFIG_SMC911X_BASE CONFIG_SMC911X_16_BIT CONFIG_SMC911X_32_BIT Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Apply to the rest of the tree, re-squash old and new patch] Signed-off-by: Tom Rini <trini@konsulko.com>
2017-09-05 20:20:44 +00:00
config SMC911X_32_BIT
net: smc911x: Drop redundant CONFIG_SMC911X_16_BIT Kconfig symbol The SMC911x Ethernet driver needs to know which accessor functions it can use to access the MMIO registers. For that reason we have a Kconfig choice between 16 and 32-bit bus width. Since it's only those two options that we (and the Linux kernel) support, and there does not seem to be any evidence of another bus width anywhere, limit the Kconfig construct to a simple symbol. This simplifies the code and allows a later rework to be much easier. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
2021-06-28 13:30:30 +00:00
bool "Enable SMC911X 32-bit interface"
net: Add SMC911X driver to Kconfig, convert We add the various SMC91XX symbols to drivers/net/Kconfig and then this converts the following to Kconfig: CONFIG_SMC911X CONFIG_SMC911X_BASE CONFIG_SMC911X_16_BIT CONFIG_SMC911X_32_BIT Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Apply to the rest of the tree, re-squash old and new patch] Signed-off-by: Tom Rini <trini@konsulko.com>
2017-09-05 20:20:44 +00:00
help
net: smc911x: Drop redundant CONFIG_SMC911X_16_BIT Kconfig symbol The SMC911x Ethernet driver needs to know which accessor functions it can use to access the MMIO registers. For that reason we have a Kconfig choice between 16 and 32-bit bus width. Since it's only those two options that we (and the Linux kernel) support, and there does not seem to be any evidence of another bus width anywhere, limit the Kconfig construct to a simple symbol. This simplifies the code and allows a later rework to be much easier. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
2021-06-28 13:30:30 +00:00
Define this if data bus is 32 bits. If your processor use a
narrower 16 bit bus or cannot convert one 32 bit word to two 16 bit
words, leave this to "n".
net: Add SMC911X driver to Kconfig, convert We add the various SMC91XX symbols to drivers/net/Kconfig and then this converts the following to Kconfig: CONFIG_SMC911X CONFIG_SMC911X_BASE CONFIG_SMC911X_16_BIT CONFIG_SMC911X_32_BIT Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Apply to the rest of the tree, re-squash old and new patch] Signed-off-by: Tom Rini <trini@konsulko.com>
2017-09-05 20:20:44 +00:00
endif #SMC911X
sunxi: Move SUNXI_GMAC to Kconfig Move the SUNXI_GMAC config option to Kconfig, remove it from SYS_EXTRA_OPTIONS and rename it into SUN7I_GMAC. Signed-off-by: Mylène Josserand <mylene.josserand@free-electrons.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2017-04-02 10:59:03 +00:00
config SUN7I_GMAC
bool "Enable Allwinner GMAC Ethernet support"
help
Enable the support for Sun7i GMAC Ethernet controller
sunxi: Fix A20-OLinuXino-MICRO LAN8710 support >From revision J the board uses new phy chip LAN8710. Compared with RTL8201, RA17 pin is TXERR. It has pullup which causes phy not to work. To fix this PA17 is muxed with GMAC function. This makes the pin output-low. Signed-off-by: Stefan Mavrodiev <stefan@olimex.com> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> Reviewed-by: Jagan Teki <jagan@openedev.com>
2017-11-03 06:56:51 +00:00
config SUN7I_GMAC_FORCE_TXERR
bool "Force PA17 as gmac function"
depends on SUN7I_GMAC
help
Some ethernet phys needs TXERR control. Since the GMAC
doesn't have such signal, setting PA17 as GMAC function
makes the pin output low, which enables data transmission.
sunxi: Convert SUNXI_EMAC to Kconfig Convert the SUNXI_EMAC config to Kconfig. Remove it from SYS_EXTRA_OPTIONS from many sunxi defconfig and renamed it into SUN4I_EMAC to not confuse it with SUN8I_EMAC. Signed-off-by: Mylène Josserand <mylene.josserand@free-electrons.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2017-04-02 10:59:07 +00:00
config SUN4I_EMAC
bool "Allwinner Sun4i Ethernet MAC support"
depends on DM_ETH
sunxi: restore PHYLIB for CONFIG_SUN4I_EMAC users due misnaming of CONFIG_SUN4I_EMAC in include/configs/sunxi-common.h, likely missed in: commit 3146f0c017df ("Move PHYLIB to Kconfig") Signed-off-by: Artturi Alm <artturi.alm@gmail.com> Reviewed-by: Jagan Teki <jagan@openedev.com>
2017-11-08 03:08:58 +00:00
select PHYLIB
sunxi: Convert SUNXI_EMAC to Kconfig Convert the SUNXI_EMAC config to Kconfig. Remove it from SYS_EXTRA_OPTIONS from many sunxi defconfig and renamed it into SUN4I_EMAC to not confuse it with SUN8I_EMAC. Signed-off-by: Mylène Josserand <mylene.josserand@free-electrons.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2017-04-02 10:59:07 +00:00
help
This driver supports the Allwinner based SUN4I Ethernet MAC.
net: Add EMAC driver for H3/A83T/A64 SoCs. This patch add EMAC driver support for H3/A83T/A64 SoCs. Tested on Pine64(A64-External PHY) and Orangepipc(H3-Internal PHY). BIG Thanks to Andre for providing some of the DT code. Signed-off-by: Amit Singh Tomar <amittomer25@gmail.com> Acked-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2016-07-06 12:29:44 +00:00
config SUN8I_EMAC
bool "Allwinner Sun8i Ethernet MAC support"
depends on DM_ETH
select PHYLIB
net: Kconfig:make PHY_GIGE and individual Micrel PHYs selectable This change migrate the following configuration options for Kconfig: * PHY_GIGE, indicates that a controller (with an appropriate PHY) is Gigabit capable and enables extra support in the miiutil for parsing the status of Gigabit PHYs * adds configuration options for Micrel KSZ9021 and KSZ9031 GbE PHYs, which previously had to enabled through a board-specific config file Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2017-03-26 16:50:23 +00:00
select PHY_GIGE
net: Add EMAC driver for H3/A83T/A64 SoCs. This patch add EMAC driver support for H3/A83T/A64 SoCs. Tested on Pine64(A64-External PHY) and Orangepipc(H3-Internal PHY). BIG Thanks to Andre for providing some of the DT code. Signed-off-by: Amit Singh Tomar <amittomer25@gmail.com> Acked-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2016-07-06 12:29:44 +00:00
help
This driver supports the Allwinner based SUN8I/SUN50I Ethernet MAC.
It can be found in H3/A64/A83T based SoCs and compatible with both
drivers/net/Kconfig: Correct use of apostrophe Signed-off-by: Tom Rini <trini@konsulko.com>
2017-02-20 14:38:03 +00:00
External and Internal PHYs.
net: Add EMAC driver for H3/A83T/A64 SoCs. This patch add EMAC driver support for H3/A83T/A64 SoCs. Tested on Pine64(A64-External PHY) and Orangepipc(H3-Internal PHY). BIG Thanks to Andre for providing some of the DT code. Signed-off-by: Amit Singh Tomar <amittomer25@gmail.com> Acked-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2016-07-06 12:29:44 +00:00
net: sh-eth: Add to Kconfig and convert This adds SH_ETHER to drivers/net/Kconfig and convert to Kconfig. Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2017-12-01 07:08:03 +00:00
config SH_ETHER
bool "Renesas SH Ethernet MAC"
select PHYLIB
help
This driver supports the Ethernet for Renesas SH and ARM SoCs.
driver: net: consolidate ti's code in separate folder Add drivers/net/ti/ folder and move all TI's code in this folder for better maintenance. Reviewed-by: Tom Rini <trini@konsulko.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
2018-10-31 21:21:39 +00:00
source "drivers/net/ti/Kconfig"
Convert CONFIG_MII et al to Kconfig This converts the following to Kconfig: CONFIG_MII CONFIG_DRIVER_TI_EMAC Signed-off-by: Adam Ford <aford173@gmail.com> Acked-by: Jagan Teki <jagan@amarulasolutions.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2018-07-21 04:03:57 +00:00
net: dc2114x: Add Kconfig entries Add Kconfig entries for the dc2114x driver and convert various boards. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Joe Hershberger <joe.hershberger@ni.com> Cc: Ramon Fried <rfried.dev@gmail.com>
2020-06-20 15:43:29 +00:00
config TULIP
bool "DEC Tulip DC2114x Ethernet support"
help
This driver supports DEC DC2114x Fast ethernet chips.
net: Add axi emac to Kconfig Also add dependency on PHYLIB and MII which is required. Clean PHYLIB dependency from the driver too. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2015-12-09 15:54:42 +00:00
config XILINX_AXIEMAC
xilinx: kconfig: Change Kconfig dependencies for Xilinx drivers Zynq/ZynqMP/Versal IPs should be possible to called also from Microblaze in PL and vice versa. That's why change dependencies and do not limit enabling just for some platforms. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Heiko Schocher <hs@denx.de>
2020-08-06 13:18:36 +00:00
depends on DM_ETH
net: Add axi emac to Kconfig Also add dependency on PHYLIB and MII which is required. Clean PHYLIB dependency from the driver too. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2015-12-09 15:54:42 +00:00
select PHYLIB
select MII
bool "Xilinx AXI Ethernet"
help
This MAC is present in Xilinx Microblaze, Zynq and ZynqMP SoCs.
net: xilinx: axi_mrmac: Add MRMAC driver Add support for xilinx multirate(MRMAC) ethernet driver. This driver uses multichannel DMA(MCDMA) for data transfers of MRMAC. Added support for 4 ports of MRMAC for speeds 10G and 25G. MCDMA supports upto 16 channels but in this driver we have setup only one channel which is enough. Tested 10G and 25G on all 4 ports. Signed-off-by: Ashok Reddy Soma <ashok.reddy.soma@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2021-07-02 10:40:34 +00:00
config XILINX_AXIMRMAC
depends on DM_ETH && ARCH_VERSAL
bool "Xilinx AXI MRMAC"
help
MRMAC is a high performance, low latency, adaptable Ethernet
integrated hard IP. This can be configured up to four ports with MAC
rates from 10GE to 100GE. This could be present in some of the Xilinx
Versal designs.
net: emaclite: Move emaclite to Kconfig Add PHYLIB and MII dependencies and enable it by default for Microblaze. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2015-12-11 08:41:49 +00:00
config XILINX_EMACLITE
xilinx: kconfig: Change Kconfig dependencies for Xilinx drivers Zynq/ZynqMP/Versal IPs should be possible to called also from Microblaze in PL and vice versa. That's why change dependencies and do not limit enabling just for some platforms. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Heiko Schocher <hs@denx.de>
2020-08-06 13:18:36 +00:00
depends on DM_ETH
net: emaclite: Move emaclite to Kconfig Add PHYLIB and MII dependencies and enable it by default for Microblaze. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2015-12-11 08:41:49 +00:00
select PHYLIB
select MII
bool "Xilinx Ethernetlite"
help
This MAC is present in Xilinx Microblaze, Zynq and ZynqMP SoCs.
net: gem: Move gem to Kconfig Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Jagan Teki <jteki@openedev.com>
2015-11-30 13:34:52 +00:00
config ZYNQ_GEM
xilinx: kconfig: Change Kconfig dependencies for Xilinx drivers Zynq/ZynqMP/Versal IPs should be possible to called also from Microblaze in PL and vice versa. That's why change dependencies and do not limit enabling just for some platforms. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Heiko Schocher <hs@denx.de>
2020-08-06 13:18:36 +00:00
depends on DM_ETH
net: gem: Add driver dependencies to PHYLIB Clear driver dependecies via Kconfig. Remove PHYLIB dependency from the driver. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2015-12-11 08:14:31 +00:00
select PHYLIB
net: gem: Move gem to Kconfig Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Jagan Teki <jteki@openedev.com>
2015-11-30 13:34:52 +00:00
bool "Xilinx Ethernet GEM"
help
net: gem: Fix typo in Kconfig entry Signed-off-by: Michal Simek <michal.simek@xilinx.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2015-12-09 15:53:52 +00:00
This MAC is present in Xilinx Zynq and ZynqMP SoCs.
net: gem: Move gem to Kconfig Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Jagan Teki <jteki@openedev.com>
2015-11-30 13:34:52 +00:00
drivers: net: Add ethernet driver for Microchip PIC32. This driver implements MAC and MII layer of the ethernet controller. Network data transfer is handled by controller internal DMA engine. Ethernet controller is configurable through device-tree file. Signed-off-by: Purna Chandra Mandal <purna.mandal@microchip.com>
2016-01-28 10:00:21 +00:00
config PIC32_ETH
bool "Microchip PIC32 Ethernet Support"
depends on DM_ETH && MACH_PIC32
select PHYLIB
help
This driver implements 10/100 Mbps Ethernet and MAC layer for
Microchip PIC32 microcontrollers.
net: gmac_rockchip: Add Rockchip GMAC driver Add a new driver for the GMAC ethernet interface present in Rockchip RK3288 SOCs. This driver subclasses the generic design-ware driver to add the glue needed specifically for Rockchip. Signed-off-by: Sjoerd Simons <sjoerd.simons@collabora.co.uk> Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Romain Perier <romain.perier@collabora.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2017-01-11 10:46:11 +00:00
config GMAC_ROCKCHIP
bool "Rockchip Synopsys Designware Ethernet MAC"
depends on DM_ETH && ETH_DESIGNWARE
help
This driver provides Rockchip SoCs network support based on the
Synopsys Designware driver.
net: ravb: Add Renesas Ethernet RAVB driver Add driver for the Renesas Ethernet AVB block found in RCar H3/M3. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Hiroyuki Yokoyama <hiroyuki.yokoyama.vx@renesas.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> Cc: Tom Rini <trini@konsulko.com> Cc: Joe Hershberger <joe.hershberger@ni.com> Based on work of: Hiroyuki Yokoyama <hiroyuki.yokoyama.vx@renesas.com> Takeshi Kihara <takeshi.kihara.df@renesas.com> Kazuya Mizuguchi <kazuya.mizuguchi.ks@renesas.com>
2017-05-13 13:54:28 +00:00
config RENESAS_RAVB
bool "Renesas Ethernet AVB MAC"
depends on DM_ETH && RCAR_GEN3
select PHYLIB
help
This driver implements support for the Ethernet AVB block in
Renesas M3 and H3 SoCs.
powerpc, 8xx: move FEC Ethernet driver in drivers/net Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
2017-07-06 08:33:23 +00:00
config MPC8XX_FEC
bool "Fast Ethernet Controller on MPC8XX"
powerpc: mpc8xx: Change CONFIG_8xx to CONFIG_MPC8xx CONFIG_8xx doesn't mean much outside of arch/powerpc/ This patch renames it CONFIG_MPC8xx just like CONFIG_MPC85xx etc ... It also renames 8xx_immap.h to immap_8xx.h to be consistent with other file names. Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
2018-03-16 16:20:41 +00:00
depends on MPC8xx
powerpc, 8xx: move FEC Ethernet driver in drivers/net Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
2017-07-06 08:33:23 +00:00
select MII
help
This driver implements support for the Fast Ethernet Controller
on MPC8XX
net: add Socionext AVE ethernet driver support Add driver for Socionext AVE ethernet controller that includes MAC and MDIO bus supporting RGMII/RMII modes. The driver behaves the ethernet driver model (DM_ETH) with devicetree. Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2018-05-24 10:24:37 +00:00
config SNI_AVE
bool "Socionext AVE Ethernet support"
depends on DM_ETH && ARCH_UNIPHIER
select PHYLIB
select SYSCON
select REGMAP
help
This driver implements support for the Socionext AVE Ethernet
controller, as found on the Socionext UniPhier family.
net: synquacer: Add netsec driver Add SynQuacer's NETSEC GbE controller driver. Since this driver will load the firmware from SPI NOR flash, this depends on CONFIG_SYNQUACER_SPI=y. Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org> Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
2021-06-04 09:44:38 +00:00
config SNI_NETSEC
bool "Socionext NETSEC Ethernet support"
depends on DM_ETH && SYNQUACER_SPI
select PHYLIB
help
This driver implements support for the Socionext SynQuacer NETSEC
ethernet controller, as found on the Socionext SynQuacer family.
net: mscc: Move ocelot_switch to mscc_eswitch folder Move file ocelot_switch to mscc_eswitch to prepare to add new net drivers for other MSCC SoCs. Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
2019-01-31 14:30:33 +00:00
source "drivers/net/mscc_eswitch/Kconfig"
net: add MSCC Ocelot switch support This patch adds support for the Microsemi Ethernet switch present on Ocelot SoCs. Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com> Reviewed-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2019-01-17 16:07:13 +00:00
powerpc, 8xx: move FEC Ethernet driver in drivers/net Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
2017-07-06 08:33:23 +00:00
config ETHER_ON_FEC1
bool "FEC1"
depends on MPC8XX_FEC
default y
config FEC1_PHY
int "FEC1 PHY"
depends on ETHER_ON_FEC1
default -1
help
Define to the hardcoded PHY address which corresponds
to the given FEC; i. e.
#define CONFIG_FEC1_PHY 4
means that the PHY with address 4 is connected to FEC1
When set to -1, means to probe for first available.
config PHY_NORXERR
bool "PHY_NORXERR"
depends on ETHER_ON_FEC1
help
The PHY does not have a RXERR line (RMII only).
(so program the FEC to ignore it).
config ETHER_ON_FEC2
bool "FEC2"
depends on MPC8XX_FEC && MPC885
default y
config FEC2_PHY
int "FEC2 PHY"
depends on ETHER_ON_FEC2
default -1
help
Define to the hardcoded PHY address which corresponds
to the given FEC; i. e.
#define CONFIG_FEC1_PHY 4
means that the PHY with address 4 is connected to FEC1
When set to -1, means to probe for first available.
config FEC2_PHY_NORXERR
bool "PHY_NORXERR"
depends on ETHER_ON_FEC2
help
The PHY does not have a RXERR line (RMII only).
(so program the FEC to ignore it).
configs: Move SYS_DPAA_QBMAN to Kconfig The CONFIG_SYS_DPAA_QBMAN define is used by DPAA1 freescale SOCs to add device tree fixups that allow deep sleep in Linux. The define was placed in header files included by a number of boards, but was not explicitly documented in any of the Kconfigs. A description was added to the drivers/networking menuconfig and default selection for current SOCs that have this part Signed-off-by: Ahmed Mansour <ahmed.mansour@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
2017-12-15 21:01:01 +00:00
config SYS_DPAA_QBMAN
bool "Device tree fixup for QBMan on freescale SOCs"
depends on (ARM || PPC) && !SPL_BUILD
default y if ARCH_B4860 || \
ARCH_B4420 || \
ARCH_P1023 || \
ARCH_P2041 || \
ARCH_T1024 || \
ARCH_T1040 || \
ARCH_T1042 || \
ARCH_T2080 || \
ARCH_T4240 || \
ARCH_P4080 || \
ARCH_P3041 || \
ARCH_P5040 || \
ARCH_LS1043A || \
ARCH_LS1046A
help
QBman fixups to allow deep sleep in DPAA 1 SOCs
treewide: Migrate CONFIG_TSEC_ENET to Kconfig Migrate the CONFIG_TSEC_ENET option to Kconfig. Signed-off-by: Mario Six <mario.six@gdsys.cc>
2018-03-28 12:38:18 +00:00
config TSEC_ENET
select PHYLIB
bool "Enable Three-Speed Ethernet Controller"
help
This driver implements support for the (Enhanced) Three-Speed
Ethernet Controller found on Freescale SoCs.
ethernet: MediaTek: add ethernet driver for MediaTek ARM-based SoCs This patch adds ethernet support for Mediatek ARM-based SoCs, including a minimum setup of the integrated switch. Cc: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Mark Lee <Mark-MC.Lee@mediatek.com> Signed-off-by: Weijie Gao <weijie.gao@mediatek.com> Tested-By: "Frank Wunderlich" <frank-w@public-files.de>
2018-12-20 08:12:53 +00:00
config MEDIATEK_ETH
bool "MediaTek Ethernet GMAC Driver"
depends on DM_ETH
select PHYLIB
select DM_GPIO
select DM_RESET
help
This Driver support MediaTek Ethernet GMAC
Say Y to enable support for the MediaTek Ethernet GMAC.
net: add higmacv300 Ethernet driver for HiSilicon platform It adds the driver for HIGMACV300 Ethernet controller found on HiSilicon SoCs like Hi3798CV200. It's based on a downstream U-Boot driver, but quite a lot of code gets rewritten and cleaned up to adopt driver model and PHY API. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2019-03-20 07:32:40 +00:00
config HIGMACV300_ETH
bool "HiSilicon Gigabit Ethernet Controller"
depends on DM_ETH
select DM_RESET
select PHYLIB
help
This driver supports HIGMACV300 Ethernet controller found on
HiSilicon SoCs.
drivers: net: add NXP ENETC ethernet driver Adds a driver for NXP ENETC ethernet controller currently integrated in LS1028A. ENETC is a fairly straight-forward BD ring device and interfaces are presented as PCI EPs on the SoC ECAM. Signed-off-by: Catalin Horghidan <catalin.horghidan@nxp.com> Signed-off-by: Alex Marginean <alexm.osslist@gmail.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2019-07-03 09:11:40 +00:00
config FSL_ENETC
bool "NXP ENETC Ethernet controller"
pci: Drop DM_PCI This option has not effect now. Drop it, using PCI instead where needed. Signed-off-by: Simon Glass <sjg@chromium.org>
2021-08-02 00:54:44 +00:00
depends on DM_ETH && DM_MDIO
drivers: net: add NXP ENETC ethernet driver Adds a driver for NXP ENETC ethernet controller currently integrated in LS1028A. ENETC is a fairly straight-forward BD ring device and interfaces are presented as PCI EPs on the SoC ECAM. Signed-off-by: Catalin Horghidan <catalin.horghidan@nxp.com> Signed-off-by: Alex Marginean <alexm.osslist@gmail.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2019-07-03 09:11:40 +00:00
help
This driver supports the NXP ENETC Ethernet controller found on some
of the NXP SoCs.
drivers: net: driver for MDIO muxes controlled over I2C This driver is used for MDIO muxes driven over I2C. This is currently used on Freescale LS1028A QDS board, on which the physical MDIO MUX is controlled by an on-board FPGA which in turn is configured through I2C. Signed-off-by: Alex Marginean <alexm.osslist@gmail.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2019-07-16 08:21:17 +00:00
config MDIO_MUX_I2CREG
bool "MDIO MUX accessed as a register over I2C"
depends on DM_MDIO_MUX && DM_I2C
help
This driver is used for MDIO muxes driven by writing to a register of
an I2C chip. The board it was developed for uses a mux controlled by
on-board FPGA which in turn is accessed as a chip over I2C.
net: Add IPQ40xx MDIO driver This adds the driver for the IPQ40xx built-in MDIO. This will be needed to support future PHY driver. Signed-off-by: Robert Marko <robert.marko@sartura.hr> Cc: Luka Perkov <luka.perkov@sartura.hr>
2020-10-08 20:05:11 +00:00
config MDIO_IPQ4019
bool "Qualcomm IPQ4019 MDIO interface support"
depends on DM_MDIO
help
This driver supports the MDIO interface found in Qualcomm
IPQ40xx series Soc-s.
drivers: net: add marvell MDIO driver This patch adds a separate driver for the MDIO interface of the Marvell Ethernet controllers based on driver model. There are two reasons to have a separate driver rather than including it inside the MAC driver itself: *) The MDIO interface is shared by all Ethernet ports, so a driver must guarantee non-concurrent accesses to this MDIO interface. The most logical way is to have a separate driver that handles this single MDIO interface, used by all Ethernet ports. *) The MDIO interface is the same between the existing mv643xx_eth driver and the new mvneta/mvpp2 driver. Even though it is for now only used by the mvneta/mvpp2 driver, it will in the future be used by the mv643xx_eth driver as well. This driver supports SMI IEEE for 802.3 Clause 22 and XSMI for IEEE 802.3 Clause 45. This patch also adds device tree binding for marvell MDIO driver. Signed-off-by: Ken Ma <make@marvell.com> Signed-off-by: Alex Marginean <alexm.osslist@gmail.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2019-07-25 09:33:19 +00:00
config MVMDIO
bool "Marvell MDIO interface support"
depends on DM_MDIO
help
This driver supports the MDIO interface found in the network
interface units of the Marvell EBU SoCs (Kirkwood, Orion5x,
Dove, Armada 370, Armada XP, Armada 37xx and Armada7K/8K/8KP).
This driver is used by the MVPP2 and MVNETA drivers.
drivers: net: add Layerscape mEMAC MDIO driver Add a driver for the MDIO interface integrated in the mEMAC (Multi-rate Ethernet Media Access Controller) and the Fman 10G Ethernet MACs. Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-03-18 14:47:36 +00:00
config FSL_LS_MDIO
bool "NXP Layerscape MDIO interface support"
depends on DM_MDIO
help
This driver supports the MDIO bus found on the Fman 10G Ethernet MACs and
on the mEMAC (which supports both Clauses 22 and 45).
drivers: net: add Aspeed MDIO driver Add a driver for the MDIO interface for Aspeed AST2600 SOC. The driver only supports clause 22 for now. Signed-off-by: Dylan Hung <dylan_hung@aspeedtech.com> Reviewed-by: Ramon Fried <rfried.dev@gmail.com> Reviewed-by: Ryan Chen <ryan_chen@aspeedtech.com>
2021-11-02 05:41:54 +00:00
config ASPEED_MDIO
bool "Aspeed MDIO interface support"
depends on DM_MDIO
help
This driver supports the MDIO bus of Aspeed AST2600 SOC. The driver
currently supports Clause 22.
net: add MMIO Register MDIO MUX driver Add support for MMIO register MDIO muxes based on the Linux mdio-mux-mmioreg driver. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
2021-02-24 14:02:23 +00:00
config MDIO_MUX_MMIOREG
bool "MDIO MUX accessed as a MMIO register access"
depends on DM_MDIO_MUX
help
This driver is used for MDIO muxes driven by writing to a register in
the MMIO physical memory.
net: add Amlogic Meson G12A MDIO MUX driver The Amlogic G12A & compatible SoCs embeds a mux to either communicate with the external PHY or the internal 10/100 PHY. This adds support for this mux as a MDIO MUX device. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
2021-02-24 16:31:53 +00:00
config MDIO_MUX_MESON_G12A
bool "MDIO MUX for Amlogic Meson G12A SoCs"
depends on DM_MDIO_MUX
help
This driver is used for the MDIO mux found on the Amlogic G12A & compatible
SoCs.
sandbox: eth: Add network support to sandbox Add basic network support to sandbox which includes a network driver. Signed-off-by: Joe Hershberger <joe.hershberger@ni.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2015-03-22 22:09:13 +00:00
endif # NETDEVICES
Reference in a new issue Copy permalink