net: convert altera_tse to driver model and phylib

Convert altera_tse to driver model and phylib.

Signed-off-by: Thomas Chou <thomas@wytron.com.tw>
Reviewed-by: Marek Vasut <marex@denx.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
This commit is contained in:
Thomas Chou 2015-10-22 15:29:11 +08:00
parent 8a3ea97966
commit 96fa1e4385
6 changed files with 524 additions and 1067 deletions

View file

@ -18,6 +18,8 @@ CONFIG_NET_RANDOM_ETHADDR=y
CONFIG_ALTERA_PIO=y
CONFIG_MISC=y
CONFIG_ALTERA_SYSID=y
CONFIG_DM_ETH=y
CONFIG_ALTERA_TSE=y
CONFIG_ALTERA_JTAG_UART=y
CONFIG_ALTERA_JTAG_UART_BYPASS=y
CONFIG_TIMER=y

View file

@ -0,0 +1,112 @@
* Altera Triple-Speed Ethernet MAC driver (TSE)
Required properties:
- compatible: Should be "altr,tse-1.0" for legacy SGDMA based TSE, and should
be "altr,tse-msgdma-1.0" for the preferred MSGDMA based TSE.
- reg: Address and length of the register set for the device. It contains
the information of registers in the same order as described by reg-names
- reg-names: Should contain the reg names
"control_port": MAC configuration space region
"tx_csr": xDMA Tx dispatcher control and status space region
"tx_desc": MSGDMA Tx dispatcher descriptor space region
"rx_csr" : xDMA Rx dispatcher control and status space region
"rx_desc": MSGDMA Rx dispatcher descriptor space region
"rx_resp": MSGDMA Rx dispatcher response space region
"s1": SGDMA descriptor memory
- interrupts: Should contain the TSE interrupts and it's mode.
- interrupt-names: Should contain the interrupt names
"rx_irq": xDMA Rx dispatcher interrupt
"tx_irq": xDMA Tx dispatcher interrupt
- rx-fifo-depth: MAC receive FIFO buffer depth in bytes
- tx-fifo-depth: MAC transmit FIFO buffer depth in bytes
- phy-mode: See ethernet.txt in the same directory.
- phy-handle: See ethernet.txt in the same directory.
- phy-addr: See ethernet.txt in the same directory. A configuration should
include phy-handle or phy-addr.
- altr,has-supplementary-unicast:
If present, TSE supports additional unicast addresses.
Otherwise additional unicast addresses are not supported.
- altr,has-hash-multicast-filter:
If present, TSE supports a hash based multicast filter.
Otherwise, hash-based multicast filtering is not supported.
- mdio device tree subnode: When the TSE has a phy connected to its local
mdio, there must be device tree subnode with the following
required properties:
- compatible: Must be "altr,tse-mdio".
- #address-cells: Must be <1>.
- #size-cells: Must be <0>.
For each phy on the mdio bus, there must be a node with the following
fields:
- reg: phy id used to communicate to phy.
- device_type: Must be "ethernet-phy".
Optional properties:
- local-mac-address: See ethernet.txt in the same directory.
- max-frame-size: See ethernet.txt in the same directory.
Example:
tse_sub_0_eth_tse_0: ethernet@0x1,00000000 {
compatible = "altr,tse-msgdma-1.0";
reg = <0x00000001 0x00000000 0x00000400>,
<0x00000001 0x00000460 0x00000020>,
<0x00000001 0x00000480 0x00000020>,
<0x00000001 0x000004A0 0x00000008>,
<0x00000001 0x00000400 0x00000020>,
<0x00000001 0x00000420 0x00000020>;
reg-names = "control_port", "rx_csr", "rx_desc", "rx_resp", "tx_csr", "tx_desc";
interrupt-parent = <&hps_0_arm_gic_0>;
interrupts = <0 41 4>, <0 40 4>;
interrupt-names = "rx_irq", "tx_irq";
rx-fifo-depth = <2048>;
tx-fifo-depth = <2048>;
address-bits = <48>;
max-frame-size = <1500>;
local-mac-address = [ 00 00 00 00 00 00 ];
phy-mode = "gmii";
altr,has-supplementary-unicast;
altr,has-hash-multicast-filter;
phy-handle = <&phy0>;
mdio {
compatible = "altr,tse-mdio";
#address-cells = <1>;
#size-cells = <0>;
phy0: ethernet-phy@0 {
reg = <0x0>;
device_type = "ethernet-phy";
};
phy1: ethernet-phy@1 {
reg = <0x1>;
device_type = "ethernet-phy";
};
};
};
tse_sub_1_eth_tse_0: ethernet@0x1,00001000 {
compatible = "altr,tse-msgdma-1.0";
reg = <0x00000001 0x00001000 0x00000400>,
<0x00000001 0x00001460 0x00000020>,
<0x00000001 0x00001480 0x00000020>,
<0x00000001 0x000014A0 0x00000008>,
<0x00000001 0x00001400 0x00000020>,
<0x00000001 0x00001420 0x00000020>;
reg-names = "control_port", "rx_csr", "rx_desc", "rx_resp", "tx_csr", "tx_desc";
interrupt-parent = <&hps_0_arm_gic_0>;
interrupts = <0 43 4>, <0 42 4>;
interrupt-names = "rx_irq", "tx_irq";
rx-fifo-depth = <2048>;
tx-fifo-depth = <2048>;
address-bits = <48>;
max-frame-size = <1500>;
local-mac-address = [ 00 00 00 00 00 00 ];
phy-mode = "gmii";
altr,has-supplementary-unicast;
altr,has-hash-multicast-filter;
phy-handle = <&phy1>;
};

View file

@ -25,6 +25,15 @@ menuconfig NETDEVICES
if NETDEVICES
config ALTERA_TSE
bool "Altera Triple-Speed Ethernet MAC support"
depends on DM_ETH
select PHYLIB
help
This driver supports the Altera Triple-Speed (TSE) Ethernet MAC.
Please find details on the "Triple-Speed Ethernet MegaCore Function
Resource Center" of Altera.
config E1000
bool "Intel PRO/1000 Gigabit Ethernet support"
help

File diff suppressed because it is too large Load diff

View file

@ -13,102 +13,6 @@
#define __packed_1_ __attribute__ ((packed, aligned(1)))
/* PHY Stuff */
#define miim_end -2
#define miim_read -1
#define PHY_AUTONEGOTIATE_TIMEOUT 5000 /* in ms */
#ifndef CONFIG_SYS_TBIPA_VALUE
#define CONFIG_SYS_TBIPA_VALUE 0x1f
#endif
#define MIIMCFG_INIT_VALUE 0x00000003
#define MIIMCFG_RESET 0x80000000
#define MIIMIND_BUSY 0x00000001
#define MIIMIND_NOTVALID 0x00000004
#define MIIM_CONTROL 0x00
#define MIIM_CONTROL_RESET 0x00009140
#define MIIM_CONTROL_INIT 0x00001140
#define MIIM_CONTROL_RESTART 0x00001340
#define MIIM_ANEN 0x00001000
#define MIIM_CR 0x00
#define MIIM_CR_RST 0x00008000
#define MIIM_CR_INIT 0x00001000
#define MIIM_STATUS 0x1
#define MIIM_STATUS_AN_DONE 0x00000020
#define MIIM_STATUS_LINK 0x0004
#define MIIM_PHYIR1 0x2
#define MIIM_PHYIR2 0x3
#define MIIM_ANAR 0x4
#define MIIM_ANAR_INIT 0x1e1
#define MIIM_TBI_ANLPBPA 0x5
#define MIIM_TBI_ANLPBPA_HALF 0x00000040
#define MIIM_TBI_ANLPBPA_FULL 0x00000020
#define MIIM_TBI_ANEX 0x6
#define MIIM_TBI_ANEX_NP 0x00000004
#define MIIM_TBI_ANEX_PRX 0x00000002
#define MIIM_GBIT_CONTROL 0x9
#define MIIM_GBIT_CONTROL_INIT 0xe00
#define MIIM_EXT_PAGE_ACCESS 0x1f
/* 88E1011 PHY Status Register */
#define MIIM_88E1011_PHY_STATUS 0x11
#define MIIM_88E1011_PHYSTAT_SPEED 0xc000
#define MIIM_88E1011_PHYSTAT_GBIT 0x8000
#define MIIM_88E1011_PHYSTAT_100 0x4000
#define MIIM_88E1011_PHYSTAT_DUPLEX 0x2000
#define MIIM_88E1011_PHYSTAT_SPDDONE 0x0800
#define MIIM_88E1011_PHYSTAT_LINK 0x0400
#define MIIM_88E1011_PHY_SCR 0x10
#define MIIM_88E1011_PHY_MDI_X_AUTO 0x0060
#define MIIM_88E1111_PHY_EXT_CR 0x14
#define MIIM_88E1111_PHY_EXT_SR 0x1b
/* 88E1111 PHY LED Control Register */
#define MIIM_88E1111_PHY_LED_CONTROL 24
#define MIIM_88E1111_PHY_LED_DIRECT 0x4100
#define MIIM_88E1111_PHY_LED_COMBINE 0x411C
#define MIIM_READ_COMMAND 0x00000001
/* struct phy_info: a structure which defines attributes for a PHY
* id will contain a number which represents the PHY. During
* startup, the driver will poll the PHY to find out what its
* UID--as defined by registers 2 and 3--is. The 32-bit result
* gotten from the PHY will be shifted right by "shift" bits to
* discard any bits which may change based on revision numbers
* unimportant to functionality
*
* The struct phy_cmd entries represent pointers to an arrays of
* commands which tell the driver what to do to the PHY.
*/
struct phy_info {
uint id;
char *name;
uint shift;
/* Called to configure the PHY, and modify the controller
* based on the results */
struct phy_cmd *config;
/* Called when starting up the controller */
struct phy_cmd *startup;
/* Called when bringing down the controller */
struct phy_cmd *shutdown;
};
/* SGDMA Stuff */
#define ALT_SGDMA_STATUS_ERROR_MSK (0x00000001)
#define ALT_SGDMA_STATUS_EOP_ENCOUNTERED_MSK (0x00000002)
@ -116,18 +20,9 @@ struct phy_info {
#define ALT_SGDMA_STATUS_CHAIN_COMPLETED_MSK (0x00000008)
#define ALT_SGDMA_STATUS_BUSY_MSK (0x00000010)
#define ALT_SGDMA_CONTROL_IE_ERROR_MSK (0x00000001)
#define ALT_SGDMA_CONTROL_IE_EOP_ENCOUNTERED_MSK (0x00000002)
#define ALT_SGDMA_CONTROL_IE_DESC_COMPLETED_MSK (0x00000004)
#define ALT_SGDMA_CONTROL_IE_CHAIN_COMPLETED_MSK (0x00000008)
#define ALT_SGDMA_CONTROL_IE_GLOBAL_MSK (0x00000010)
#define ALT_SGDMA_CONTROL_RUN_MSK (0x00000020)
#define ALT_SGDMA_CONTROL_STOP_DMA_ER_MSK (0x00000040)
#define ALT_SGDMA_CONTROL_IE_MAX_DESC_PROCESSED_MSK (0x00000080)
#define ALT_SGDMA_CONTROL_MAX_DESC_PROCESSED_MSK (0x0000FF00)
#define ALT_SGDMA_CONTROL_SOFTWARERESET_MSK (0x00010000)
#define ALT_SGDMA_CONTROL_PARK_MSK (0x00020000)
#define ALT_SGDMA_CONTROL_CLEAR_INTERRUPT_MSK (0x80000000)
#define ALTERA_TSE_SGDMA_INTR_MASK (ALT_SGDMA_CONTROL_IE_CHAIN_COMPLETED_MSK \
| ALT_SGDMA_STATUS_DESC_COMPLETED_MSK \
@ -176,13 +71,13 @@ struct phy_info {
*
*/
struct alt_sgdma_descriptor {
unsigned int *source; /* the address of data to be read. */
unsigned int source; /* the address of data to be read. */
unsigned int source_pad;
unsigned int *destination; /* the address to write data */
unsigned int destination; /* the address to write data */
unsigned int destination_pad;
unsigned int *next; /* the next descriptor in the list. */
unsigned int next; /* the next descriptor in the list. */
unsigned int next_pad;
unsigned short bytes_to_transfer; /* the number of bytes to transfer */
@ -241,112 +136,15 @@ struct alt_sgdma_registers {
#define ALTERA_TSE_RX_CMD_STAT_RX_SHIFT16 (0x02000000)
#define ALT_TSE_SW_RESET_WATCHDOG_CNTR 10000
#define ALT_TSE_SGDMA_BUSY_WATCHDOG_CNTR 90000000
/* Command_Config Register Bit Definitions */
typedef volatile union __alt_tse_command_config {
unsigned int image;
struct {
unsigned int
transmit_enable:1, /* bit 0 */
receive_enable:1, /* bit 1 */
pause_frame_xon_gen:1, /* bit 2 */
ethernet_speed:1, /* bit 3 */
promiscuous_enable:1, /* bit 4 */
pad_enable:1, /* bit 5 */
crc_forward:1, /* bit 6 */
pause_frame_forward:1, /* bit 7 */
pause_frame_ignore:1, /* bit 8 */
set_mac_address_on_tx:1, /* bit 9 */
halfduplex_enable:1, /* bit 10 */
excessive_collision:1, /* bit 11 */
late_collision:1, /* bit 12 */
software_reset:1, /* bit 13 */
multicast_hash_mode_sel:1, /* bit 14 */
loopback_enable:1, /* bit 15 */
src_mac_addr_sel_on_tx:3, /* bit 18:16 */
magic_packet_detect:1, /* bit 19 */
sleep_mode_enable:1, /* bit 20 */
wake_up_request:1, /* bit 21 */
pause_frame_xoff_gen:1, /* bit 22 */
control_frame_enable:1, /* bit 23 */
payload_len_chk_disable:1, /* bit 24 */
enable_10mbps_intf:1, /* bit 25 */
rx_error_discard_enable:1, /* bit 26 */
reserved_bits:4, /* bit 30:27 */
self_clear_counter_reset:1; /* bit 31 */
} __packed_1_ bits;
} __packed_1_ alt_tse_command_config;
/* Tx_Cmd_Stat Register Bit Definitions */
typedef volatile union __alt_tse_tx_cmd_stat {
unsigned int image;
struct {
unsigned int reserved_lsbs:17, /* bit 16:0 */
omit_crc:1, /* bit 17 */
tx_shift16:1, /* bit 18 */
reserved_msbs:13; /* bit 31:19 */
} __packed_1_ bits;
} alt_tse_tx_cmd_stat;
/* Rx_Cmd_Stat Register Bit Definitions */
typedef volatile union __alt_tse_rx_cmd_stat {
unsigned int image;
struct {
unsigned int reserved_lsbs:25, /* bit 24:0 */
rx_shift16:1, /* bit 25 */
reserved_msbs:6; /* bit 31:26 */
} __packed_1_ bits;
} alt_tse_rx_cmd_stat;
struct alt_tse_mdio {
unsigned int control; /*PHY device operation control register */
unsigned int status; /*PHY device operation status register */
unsigned int phy_id1; /*Bits 31:16 of PHY identifier. */
unsigned int phy_id2; /*Bits 15:0 of PHY identifier. */
unsigned int auto_negotiation_advertisement;
unsigned int remote_partner_base_page_ability;
unsigned int reg6;
unsigned int reg7;
unsigned int reg8;
unsigned int reg9;
unsigned int rega;
unsigned int regb;
unsigned int regc;
unsigned int regd;
unsigned int rege;
unsigned int regf;
unsigned int reg10;
unsigned int reg11;
unsigned int reg12;
unsigned int reg13;
unsigned int reg14;
unsigned int reg15;
unsigned int reg16;
unsigned int reg17;
unsigned int reg18;
unsigned int reg19;
unsigned int reg1a;
unsigned int reg1b;
unsigned int reg1c;
unsigned int reg1d;
unsigned int reg1e;
unsigned int reg1f;
};
#define ALT_TSE_SW_RESET_TIMEOUT (3 * CONFIG_SYS_HZ)
#define ALT_TSE_SGDMA_BUSY_TIMEOUT (3 * CONFIG_SYS_HZ)
/* MAC register Space */
struct alt_tse_mac {
unsigned int megacore_revision;
unsigned int scratch_pad;
alt_tse_command_config command_config;
unsigned int command_config;
unsigned int mac_addr_0;
unsigned int mac_addr_1;
unsigned int max_frame_length;
@ -413,8 +211,8 @@ struct alt_tse_mac {
unsigned int reservedxE4;
/*FIFO control register. */
alt_tse_tx_cmd_stat tx_cmd_stat;
alt_tse_rx_cmd_stat rx_cmd_stat;
unsigned int tx_cmd_stat;
unsigned int rx_cmd_stat;
unsigned int ipaccTxConf;
unsigned int ipaccRxConf;
@ -425,8 +223,8 @@ struct alt_tse_mac {
unsigned int hash_table[64];
/*Registers 0 to 31 within PHY device 0/1 */
struct alt_tse_mdio mdio_phy0;
struct alt_tse_mdio mdio_phy1;
unsigned int mdio_phy0[0x20];
unsigned int mdio_phy1[0x20];
/*4 Supplemental MAC Addresses */
unsigned int supp_mac_addr_0_0;
@ -441,52 +239,19 @@ struct alt_tse_mac {
unsigned int reservedx320[56];
};
/* flags: TSE MII modes */
/* GMII/MII = 0 */
/* RGMII = 1 */
/* RGMII_ID = 2 */
/* RGMII_TXID = 3 */
/* RGMII_RXID = 4 */
/* SGMII = 5 */
struct altera_tse_priv {
char devname[16];
volatile struct alt_tse_mac *mac_dev;
volatile struct alt_sgdma_registers *sgdma_rx;
volatile struct alt_sgdma_registers *sgdma_tx;
unsigned int rx_sgdma_irq;
unsigned int tx_sgdma_irq;
unsigned int has_descriptor_mem;
unsigned int descriptor_mem_base;
unsigned int descriptor_mem_size;
volatile struct alt_sgdma_descriptor *rx_desc;
volatile struct alt_sgdma_descriptor *tx_desc;
volatile unsigned char *rx_buf;
struct phy_info *phyinfo;
struct alt_tse_mac *mac_dev;
struct alt_sgdma_registers *sgdma_rx;
struct alt_sgdma_registers *sgdma_tx;
unsigned int rx_fifo_depth;
unsigned int tx_fifo_depth;
struct alt_sgdma_descriptor *rx_desc;
struct alt_sgdma_descriptor *tx_desc;
unsigned char *rx_buf;
unsigned int phyaddr;
unsigned int flags;
unsigned int link;
unsigned int duplexity;
unsigned int speed;
unsigned int interface;
struct phy_device *phydev;
struct mii_dev *bus;
};
/* Phy stuff continued */
/*
* struct phy_cmd: A command for reading or writing a PHY register
*
* mii_reg: The register to read or write
*
* mii_data: For writes, the value to put in the register.
* A value of -1 indicates this is a read.
*
* funct: A function pointer which is invoked for each command.
* For reads, this function will be passed the value read
* from the PHY, and process it.
* For writes, the result of this function will be written
* to the PHY register
*/
struct phy_cmd {
uint mii_reg;
uint mii_data;
uint(*funct) (uint mii_reg, struct altera_tse_priv *priv);
};
#endif /* _ALTERA_TSE_H_ */

View file

@ -33,6 +33,14 @@
#define CONFIG_SYS_MAX_FLASH_BANKS 1
#define CONFIG_SYS_MAX_FLASH_SECT 512
/*
* MII/PHY
*/
#define CONFIG_CMD_MII 1
#define CONFIG_PHY_GIGE 1
#define CONFIG_SYS_FAULT_ECHO_LINK_DOWN 1
#define CONFIG_PHY_MARVELL 1
/*
* BOOTP options
*/