net: Add SMC911X driver to Kconfig, convert

We add the various SMC91XX symbols to drivers/net/Kconfig and then this
converts the following to Kconfig:
   CONFIG_SMC911X
   CONFIG_SMC911X_BASE
   CONFIG_SMC911X_16_BIT
   CONFIG_SMC911X_32_BIT

Signed-off-by: Adam Ford <aford173@gmail.com>
[trini: Apply to the rest of the tree, re-squash old and new patch]
Signed-off-by: Tom Rini <trini@konsulko.com>
This commit is contained in:
Adam Ford 2017-09-05 15:20:44 -05:00 committed by Tom Rini
parent 0a9ef45158
commit 8daec2d9d3
70 changed files with 174 additions and 184 deletions

15
README
View file

@ -1028,21 +1028,6 @@ The following options need to be configured:
control registers. This behavior won't affect the
correctnessof 10/100 link speed update.
CONFIG_SMC911X
Support for SMSC's LAN911x and LAN921x chips
CONFIG_SMC911X_BASE
Define this to hold the physical address
of the device (I/O space)
CONFIG_SMC911X_32_BIT
Define this if data bus is 32 bits
CONFIG_SMC911X_16_BIT
Define this if data bus is 16 bits. If your processor
automatically converts one 32 bit word to two 16 bit
words you may also try CONFIG_SMC911X_32_BIT.
CONFIG_SH_ETHER
Support for Renesas on-chip Ethernet controller

View file

@ -452,6 +452,7 @@ static int handle_mac_address(void)
* Routine: board_eth_init
* Description: initialize module and base-board Ethernet chips
*/
#define SB_T35_SMC911X_BASE (CONFIG_SMC911X_BASE + SZ_16M)
int board_eth_init(bd_t *bis)
{
int rc = 0, rc1 = 0;
@ -460,7 +461,7 @@ int board_eth_init(bd_t *bis)
if (rc1)
printf("No MAC address found! ");
rc1 = cl_omap3_smc911x_init(0, 5, CM_T3X_SMC911X_BASE,
rc1 = cl_omap3_smc911x_init(0, 5, CONFIG_SMC911X_BASE,
cm_t3x_reset_net_chip, -EINVAL);
if (rc1 > 0)
rc++;

View file

@ -25,6 +25,10 @@ CONFIG_CMD_EXT2=y
CONFIG_DOS_PARTITION=y
CONFIG_ENV_IS_IN_FLASH=y
CONFIG_MTD_NOR_FLASH=y
CONFIG_NETDEVICES=y
CONFIG_SMC911X=y
CONFIG_SMC911X_BASE=0xB6080000
CONFIG_SMC911X_32_BIT=y
CONFIG_BAUDRATE=38400
CONFIG_SCIF_CONSOLE=y
CONFIG_USE_PRIVATE_LIBGCC=y

View file

@ -25,6 +25,9 @@ CONFIG_DM_I2C_COMPAT=y
CONFIG_MMC_DW=y
CONFIG_MMC_SDHCI=y
CONFIG_MMC_SDHCI_S5P=y
CONFIG_NETDEVICES=y
CONFIG_SMC911X=y
CONFIG_SMC911X_BASE=0x5000000
CONFIG_SOUND=y
CONFIG_I2S=y
CONFIG_I2S_SAMSUNG=y

View file

@ -20,5 +20,8 @@ CONFIG_MTD_NOR_FLASH=y
CONFIG_SPI_FLASH=y
CONFIG_SPI_FLASH_BAR=y
CONFIG_SPI_FLASH_SPANSION=y
CONFIG_NETDEVICES=y
CONFIG_SMC911X=y
CONFIG_SMC911X_BASE=0x18000000
CONFIG_BAUDRATE=38400
CONFIG_SCIF_CONSOLE=y

View file

@ -38,6 +38,10 @@ CONFIG_LED_STATUS_BOOT_ENABLE=y
CONFIG_LED_STATUS_BOOT=0
CONFIG_MMC_OMAP_HS=y
CONFIG_NAND=y
CONFIG_NETDEVICES=y
CONFIG_SMC911X=y
CONFIG_SMC911X_BASE=0x2D000000
CONFIG_SMC911X_32_BIT=y
CONFIG_SYS_NS16550=y
CONFIG_OMAP3_SPI=y
CONFIG_USB=y

View file

@ -40,6 +40,10 @@ CONFIG_LED_STATUS_BOOT=0
CONFIG_MMC_OMAP_HS=y
CONFIG_NAND=y
CONFIG_SPL_NAND_SIMPLE=y
CONFIG_NETDEVICES=y
CONFIG_SMC911X=y
CONFIG_SMC911X_BASE=0x2C000000
CONFIG_SMC911X_32_BIT=y
CONFIG_SYS_NS16550=y
CONFIG_OMAP3_SPI=y
CONFIG_USB=y
@ -47,3 +51,4 @@ CONFIG_USB_EHCI_HCD=y
CONFIG_USB_STORAGE=y
CONFIG_LCD=y
CONFIG_OF_LIBFDT=y
CONFIG_NETDEVICES=y

View file

@ -23,6 +23,10 @@ CONFIG_CMD_EXT4_WRITE=y
# CONFIG_SPL_EFI_PARTITION is not set
CONFIG_SPL_PARTITION_UUIDS=y
CONFIG_MMC_OMAP_HS=y
CONFIG_NETDEVICES=y
CONFIG_SMC911X=y
CONFIG_SMC911X_BASE=0x2C000000
CONFIG_SMC911X_32_BIT=y
CONFIG_SYS_NS16550=y
CONFIG_OMAP3_SPI=y
CONFIG_USB=y

View file

@ -32,6 +32,10 @@ CONFIG_MMC_OMAP_HS=y
CONFIG_NAND=y
CONFIG_SYS_NAND_BUSWIDTH_16BIT=y
CONFIG_SPL_NAND_SIMPLE=y
CONFIG_NETDEVICES=y
CONFIG_SMC911X=y
CONFIG_SMC911X_BASE=0x2C000000
CONFIG_SMC911X_32_BIT=y
CONFIG_SYS_NS16550=y
CONFIG_OMAP3_SPI=y
CONFIG_FAT_WRITE=y

View file

@ -33,6 +33,10 @@ CONFIG_NAND=y
CONFIG_SYS_NAND_BUSWIDTH_16BIT=y
CONFIG_SPL_NAND_SIMPLE=y
CONFIG_MTD_UBI_FASTMAP=y
CONFIG_NETDEVICES=y
CONFIG_SMC911X=y
CONFIG_SMC911X_BASE=0x2C000000
CONFIG_SMC911X_32_BIT=y
CONFIG_SYS_NS16550=y
CONFIG_OMAP3_SPI=y
CONFIG_FAT_WRITE=y

View file

@ -10,3 +10,7 @@ CONFIG_CMD_PING=y
CONFIG_ENV_IS_IN_EEPROM=y
# CONFIG_MMC is not set
CONFIG_MTD_NOR_FLASH=y
CONFIG_NETDEVICES=y
CONFIG_SMC911X=y
CONFIG_SMC911X_BASE=0xa8000000
CONFIG_SMC911X_32_BIT=y

View file

@ -14,3 +14,7 @@ CONFIG_CMD_BMP=y
CONFIG_ENV_IS_IN_EEPROM=y
# CONFIG_MMC is not set
CONFIG_MTD_NOR_FLASH=y
CONFIG_NETDEVICES=y
CONFIG_SMC911X=y
CONFIG_SMC911X_BASE=0xa8000000
CONFIG_SMC911X_32_BIT=y

View file

@ -17,6 +17,10 @@ CONFIG_CMD_FAT=y
CONFIG_ENV_IS_IN_FLASH=y
# CONFIG_MMC is not set
CONFIG_MTD_NOR_FLASH=y
CONFIG_NETDEVICES=y
CONFIG_SMC911X=y
CONFIG_SMC911X_BASE=0x10000000
CONFIG_SMC911X_32_BIT=y
CONFIG_SCIF_CONSOLE=y
# CONFIG_FAT_WRITE is not set
CONFIG_OF_LIBFDT=y

View file

@ -18,3 +18,7 @@ CONFIG_ENV_IS_IN_NAND=y
# CONFIG_MMC is not set
CONFIG_NAND=y
CONFIG_NAND_MXC=y
CONFIG_NETDEVICES=y
CONFIG_SMC911X=y
CONFIG_SMC911X_BASE=0xB6000000
CONFIG_SMC911X_32_BIT=y

View file

@ -25,6 +25,9 @@ CONFIG_ENV_IS_IN_FLASH=y
CONFIG_MTD_NOR_FLASH=y
CONFIG_NAND=y
CONFIG_NAND_MXC=y
CONFIG_NETDEVICES=y
CONFIG_SMC911X=y
CONFIG_SMC911X_BASE=0xB6000000
CONFIG_USB=y
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_STORAGE=y

View file

@ -16,4 +16,7 @@ CONFIG_CMD_FAT=y
CONFIG_ENV_IS_IN_MMC=y
CONFIG_NAND=y
CONFIG_NAND_MXC=y
CONFIG_NETDEVICES=y
CONFIG_SMC911X=y
CONFIG_SMC911X_BASE=0xF4000000
CONFIG_OF_LIBFDT=y

View file

@ -29,6 +29,9 @@ CONFIG_DFU_MMC=y
CONFIG_MMC_DW=y
CONFIG_MMC_SDHCI=y
CONFIG_MMC_SDHCI_S5P=y
CONFIG_NETDEVICES=y
CONFIG_SMC911X=y
CONFIG_SMC911X_BASE=0x5000000
CONFIG_DM_PMIC=y
CONFIG_PMIC_S2MPS11=y
CONFIG_DM_REGULATOR=y

View file

@ -44,6 +44,10 @@ CONFIG_MTD=y
CONFIG_NAND=y
CONFIG_SYS_NAND_BUSWIDTH_16BIT=y
CONFIG_SPL_NAND_SIMPLE=y
CONFIG_NETDEVICES=y
CONFIG_SMC911X=y
CONFIG_SMC911X_BASE=0x2C000000
CONFIG_SMC911X_32_BIT=y
CONFIG_DM_SERIAL=y
CONFIG_SYS_NS16550=y
CONFIG_OMAP3_SPI=y

View file

@ -37,6 +37,10 @@ CONFIG_SYS_NAND_BUSWIDTH_16BIT=y
CONFIG_SYS_NAND_U_BOOT_LOCATIONS=y
CONFIG_SYS_NAND_U_BOOT_OFFS=0x80000
CONFIG_SPL_NAND_SIMPLE=y
CONFIG_NETDEVICES=y
CONFIG_SMC911X=y
CONFIG_SMC911X_BASE=0x08000000
CONFIG_SMC911X_32_BIT=y
CONFIG_SYS_NS16550=y
CONFIG_OMAP3_SPI=y
CONFIG_USB=y

View file

@ -43,6 +43,10 @@ CONFIG_MMC_OMAP_HS=y
CONFIG_NAND=y
CONFIG_SYS_NAND_BUSWIDTH_16BIT=y
CONFIG_SPL_NAND_SIMPLE=y
CONFIG_NETDEVICES=y
CONFIG_SMC911X=y
CONFIG_SMC911X_BASE=0x2C000000
CONFIG_SMC911X_32_BIT=y
CONFIG_SYS_NS16550=y
CONFIG_OMAP3_SPI=y
CONFIG_USB=y
@ -51,3 +55,4 @@ CONFIG_USB_STORAGE=y
CONFIG_FAT_WRITE=y
CONFIG_BCH=y
CONFIG_OF_LIBFDT=y
CONFIG_NETDEVICES=y

View file

@ -33,6 +33,10 @@ CONFIG_ENV_IS_IN_NAND=y
CONFIG_MMC_OMAP_HS=y
CONFIG_NAND=y
CONFIG_SYS_NAND_BUSWIDTH_16BIT=y
CONFIG_NETDEVICES=y
CONFIG_SMC911X=y
CONFIG_SMC911X_BASE=0x08000000
CONFIG_SMC911X_32_BIT=y
CONFIG_SYS_NS16550=y
CONFIG_OMAP3_SPI=y
CONFIG_FAT_WRITE=y

View file

@ -38,6 +38,9 @@ CONFIG_MMC_SDHCI_S5P=y
CONFIG_SPI_FLASH=y
CONFIG_SPI_FLASH_GIGADEVICE=y
CONFIG_SPI_FLASH_WINBOND=y
CONFIG_NETDEVICES=y
CONFIG_SMC911X=y
CONFIG_SMC911X_BASE=0x5000000
CONFIG_DM_PMIC=y
CONFIG_PMIC_TPS65090=y
CONFIG_DM_REGULATOR=y

View file

@ -38,6 +38,9 @@ CONFIG_MMC_SDHCI_S5P=y
CONFIG_SPI_FLASH=y
CONFIG_SPI_FLASH_GIGADEVICE=y
CONFIG_SPI_FLASH_WINBOND=y
CONFIG_NETDEVICES=y
CONFIG_SMC911X=y
CONFIG_SMC911X_BASE=0x5000000
CONFIG_DM_PMIC=y
CONFIG_PMIC_TPS65090=y
CONFIG_DM_REGULATOR=y

View file

@ -34,6 +34,9 @@ CONFIG_MMC_SDHCI_S5P=y
CONFIG_SPI_FLASH=y
CONFIG_SPI_FLASH_GIGADEVICE=y
CONFIG_SPI_FLASH_WINBOND=y
CONFIG_NETDEVICES=y
CONFIG_SMC911X=y
CONFIG_SMC911X_BASE=0x5000000
CONFIG_DM_PMIC=y
CONFIG_DM_PMIC_MAX77686=y
CONFIG_DM_REGULATOR=y

View file

@ -29,6 +29,9 @@ CONFIG_MMC_SDHCI_S5P=y
CONFIG_SPI_FLASH=y
CONFIG_SPI_FLASH_GIGADEVICE=y
CONFIG_SPI_FLASH_WINBOND=y
CONFIG_NETDEVICES=y
CONFIG_SMC911X=y
CONFIG_SMC911X_BASE=0x5000000
CONFIG_DM_PMIC=y
CONFIG_DM_REGULATOR=y
CONFIG_EXYNOS_SPI=y

View file

@ -16,3 +16,6 @@ CONFIG_CMD_FAT=y
CONFIG_CMD_MTDPARTS=y
CONFIG_ENV_IS_IN_ONENAND=y
# CONFIG_MMC is not set
CONFIG_NETDEVICES=y
CONFIG_SMC911X=y
CONFIG_SMC911X_BASE=0x98800300

View file

@ -28,5 +28,8 @@ CONFIG_MMC_DW=y
CONFIG_MMC_SDHCI=y
CONFIG_MMC_SDHCI_SDMA=y
CONFIG_MMC_SDHCI_S5P=y
CONFIG_NETDEVICES=y
CONFIG_SMC911X=y
CONFIG_SMC911X_BASE=0x5000000
CONFIG_USB=y
CONFIG_DM_USB=y

View file

@ -42,6 +42,9 @@ CONFIG_MMC_SDHCI_S5P=y
CONFIG_SPI_FLASH=y
CONFIG_SPI_FLASH_GIGADEVICE=y
CONFIG_SPI_FLASH_WINBOND=y
CONFIG_NETDEVICES=y
CONFIG_SMC911X=y
CONFIG_SMC911X_BASE=0x5000000
CONFIG_DM_PMIC=y
CONFIG_DM_PMIC_MAX77686=y
CONFIG_PMIC_S5M8767=y

View file

@ -42,6 +42,9 @@ CONFIG_MMC_SDHCI_S5P=y
CONFIG_SPI_FLASH=y
CONFIG_SPI_FLASH_GIGADEVICE=y
CONFIG_SPI_FLASH_WINBOND=y
CONFIG_NETDEVICES=y
CONFIG_SMC911X=y
CONFIG_SMC911X_BASE=0x5000000
CONFIG_DM_PMIC=y
CONFIG_DM_PMIC_MAX77686=y
CONFIG_PMIC_S5M8767=y

View file

@ -34,6 +34,9 @@ CONFIG_NAND=y
CONFIG_NAND_OMAP_GPMC_PREFETCH=y
CONFIG_SYS_NAND_BUSWIDTH_16BIT=y
CONFIG_SPL_NAND_SIMPLE=y
CONFIG_NETDEVICES=y
CONFIG_SMC911X=y
CONFIG_SMC911X_BASE=0x2C000000
CONFIG_SYS_NS16550=y
CONFIG_USB=y
CONFIG_USB_EHCI_HCD=y

View file

@ -44,6 +44,9 @@ CONFIG_NAND_DENALI_DT=y
CONFIG_SYS_NAND_DENALI_64BIT=y
CONFIG_NAND_DENALI_SPARE_AREA_SKIP_BYTES=8
CONFIG_SPL_NAND_DENALI=y
CONFIG_NETDEVICES=y
CONFIG_SMC911X=y
CONFIG_SMC911X_32_BIT=y
CONFIG_USB=y
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_EHCI_GENERIC=y

View file

@ -43,6 +43,10 @@ CONFIG_NAND_DENALI_DT=y
CONFIG_SYS_NAND_DENALI_64BIT=y
CONFIG_NAND_DENALI_SPARE_AREA_SKIP_BYTES=8
CONFIG_SPL_NAND_DENALI=y
CONFIG_NETDEVICES=y
CONFIG_SMC911X=y
CONFIG_SMC911X_BASE=0x0
CONFIG_SMC911X_32_BIT=y
CONFIG_USB=y
CONFIG_USB_XHCI_HCD=y
CONFIG_USB_EHCI_HCD=y

View file

@ -38,6 +38,10 @@ CONFIG_NAND_DENALI=y
CONFIG_NAND_DENALI_DT=y
CONFIG_SYS_NAND_DENALI_64BIT=y
CONFIG_NAND_DENALI_SPARE_AREA_SKIP_BYTES=8
CONFIG_NETDEVICES=y
CONFIG_SMC911X=y
CONFIG_SMC911X_BASE=0x0
CONFIG_SMC911X_32_BIT=y
CONFIG_SYSRESET=y
CONFIG_SYSRESET_PSCI=y
CONFIG_USB=y

View file

@ -15,6 +15,10 @@ CONFIG_CMD_SNTP=y
CONFIG_CMD_FAT=y
CONFIG_ENV_IS_IN_FLASH=y
CONFIG_MTD_NOR_FLASH=y
CONFIG_NETDEVICES=y
CONFIG_SMC911X=y
CONFIG_SMC911X_BASE=0x00000000
CONFIG_SMC911X_32_BIT=y
CONFIG_SYS_NS16550=y
CONFIG_USB=y
CONFIG_USB_EHCI_HCD=y

View file

@ -19,6 +19,10 @@ CONFIG_CMD_JFFS2=y
CONFIG_CMD_UBI=y
# CONFIG_CMD_UBIFS is not set
CONFIG_ENV_IS_IN_ONENAND=y
CONFIG_NETDEVICES=y
CONFIG_SMC911X=y
CONFIG_SMC911X_BASE=0x00000000
CONFIG_SMC911X_32_BIT=y
CONFIG_SYS_NS16550=y
CONFIG_USB=y
CONFIG_USB_EHCI_HCD=y

View file

@ -15,6 +15,10 @@ CONFIG_CMD_SNTP=y
CONFIG_CMD_FAT=y
CONFIG_ENV_IS_IN_FLASH=y
CONFIG_MTD_NOR_FLASH=y
CONFIG_NETDEVICES=y
CONFIG_SMC911X=y
CONFIG_SMC911X_BASE=0x00000000
CONFIG_SMC911X_32_BIT=y
CONFIG_SYS_NS16550=y
CONFIG_USB=y
CONFIG_USB_EHCI_HCD=y

View file

@ -19,6 +19,10 @@ CONFIG_CMD_JFFS2=y
CONFIG_CMD_UBI=y
# CONFIG_CMD_UBIFS is not set
CONFIG_ENV_IS_IN_ONENAND=y
CONFIG_NETDEVICES=y
CONFIG_SMC911X=y
CONFIG_SMC911X_BASE=0x00000000
CONFIG_SMC911X_32_BIT=y
CONFIG_SYS_NS16550=y
CONFIG_USB=y
CONFIG_USB_EHCI_HCD=y

View file

@ -28,5 +28,9 @@ CONFIG_ENV_IS_IN_FLASH=y
CONFIG_DM=y
# CONFIG_MMC is not set
CONFIG_MTD_NOR_FLASH=y
CONFIG_NETDEVICES=y
CONFIG_SMC911X=y
CONFIG_SMC911X_BASE=0x018000000
CONFIG_SMC911X_32_BIT=y
CONFIG_DM_SERIAL=y
CONFIG_OF_LIBFDT=y

View file

@ -19,5 +19,9 @@ CONFIG_CMD_MMC=y
# CONFIG_CMD_MISC is not set
CONFIG_ENV_IS_IN_FLASH=y
CONFIG_MTD_NOR_FLASH=y
CONFIG_NETDEVICES=y
CONFIG_SMC911X=y
CONFIG_SMC911X_BASE=0x1a000000
CONFIG_SMC911X_32_BIT=y
CONFIG_BAUDRATE=38400
CONFIG_OF_LIBFDT=y

View file

@ -18,5 +18,9 @@ CONFIG_CMD_MMC=y
# CONFIG_CMD_MISC is not set
CONFIG_ENV_IS_IN_FLASH=y
CONFIG_MTD_NOR_FLASH=y
CONFIG_NETDEVICES=y
CONFIG_SMC911X=y
CONFIG_SMC911X_BASE=0x1a000000
CONFIG_SMC911X_32_BIT=y
CONFIG_BAUDRATE=38400
CONFIG_OF_LIBFDT=y

View file

@ -18,5 +18,9 @@ CONFIG_CMD_MMC=y
# CONFIG_CMD_MISC is not set
CONFIG_ENV_IS_IN_FLASH=y
CONFIG_MTD_NOR_FLASH=y
CONFIG_NETDEVICES=y
CONFIG_SMC911X=y
CONFIG_SMC911X_BASE=0x4e000000
CONFIG_SMC911X_32_BIT=y
CONFIG_BAUDRATE=38400
CONFIG_OF_LIBFDT=y

View file

@ -211,6 +211,34 @@ config RTL8169
This driver supports Realtek 8169 series gigabit ethernet family of
PCI/PCIe chipsets/adapters.
config SMC911X
bool "SMSC LAN911x and LAN921x controller driver"
if SMC911X
config SMC911X_BASE
hex "SMC911X Base Address"
help
Define this to hold the physical address
of the device (I/O space)
choice
prompt "SMC911X bus width"
default SMC911X_16_BIT
config SMC911X_32_BIT
bool "Enable 32-bit interface"
config SMC911X_16_BIT
bool "Enable 16-bit interface"
help
Define this if data bus is 16 bits. If your processor
automatically converts one 32 bit word to two 16 bit
words you may also try CONFIG_SMC911X_32_BIT.
endchoice
endif #SMC911X
config SUN7I_GMAC
bool "Enable Allwinner GMAC Ethernet support"
help

View file

@ -16,11 +16,6 @@
#define CONFIG_DISPLAY_BOARDINFO
#undef CONFIG_SHOW_BOOT_PROGRESS
/* SMC9118 */
#define CONFIG_SMC911X 1
#define CONFIG_SMC911X_32_BIT 1
#define CONFIG_SMC911X_BASE 0xB6080000
/* MEMORY */
#define AP325RXA_SDRAM_BASE (0x88000000)
#define AP325RXA_FLASH_BASE_1 (0xA0000000)

View file

@ -65,11 +65,7 @@
#undef CONFIG_CMD_SPI
#endif
/* BLANCHE on board LANC: SMC89218 (ExCS0) */
#define CONFIG_NET_MULTI
#define CONFIG_SMC911X 1
#define CONFIG_SMC911X_16_BIT 1
#define CONFIG_SMC911X_BASE 0x18000000
/* Board Clock */
#define RMOBILE_XTAL_CLK 20000000u

View file

@ -207,14 +207,6 @@
#define CONFIG_ENV_OFFSET 0x260000
#define CONFIG_ENV_ADDR 0x260000
#if defined(CONFIG_CMD_NET)
#define CONFIG_SMC911X
#define CONFIG_SMC911X_32_BIT
#define CM_T3X_SMC911X_BASE 0x2C000000
#define SB_T35_SMC911X_BASE (CM_T3X_SMC911X_BASE + (16 << 20))
#define CONFIG_SMC911X_BASE CM_T3X_SMC911X_BASE
#endif /* (CONFIG_CMD_NET) */
/* additions for new relocation code, must be added to all boards */
#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1
#define CONFIG_SYS_INIT_RAM_ADDR 0x4020f800

View file

@ -213,9 +213,6 @@
#define CONFIG_DRIVER_TI_EMAC
#define CONFIG_DRIVER_TI_EMAC_USE_RMII
#define CONFIG_MII
#define CONFIG_SMC911X
#define CONFIG_SMC911X_32_BIT
#define CONFIG_SMC911X_BASE (0x2C000000 + (16 << 20))
#define CONFIG_ARP_TIMEOUT 200UL
#define CONFIG_NET_RETRY_COUNT 5
#endif /* CONFIG_CMD_NET */

View file

@ -30,10 +30,6 @@
#define CONFIG_SYS_ENABLE_PADS_ALL
#define CONFIG_SMC911X
#define CONFIG_SMC911X_32_BIT
#define CONFIG_SMC911X_BASE 0x2C000000
/* GPIO */
/* ENV related config options */

View file

@ -123,9 +123,6 @@
/* Ethernet Controllor Driver */
#ifdef CONFIG_CMD_NET
#define CONFIG_SMC911X
#define CONFIG_SMC911X_BASE 0x5000000
#define CONFIG_SMC911X_16_BIT
#define CONFIG_ENV_SROM_BANK 1
#endif /*CONFIG_CMD_NET*/

View file

@ -85,10 +85,6 @@
"pclk:185925,le:9,ri:17,up:7,lo:10,hs:1,vs:1," \
"sync:1241513985,vmode:0\0"
#define CONFIG_SMC911X
#define CONFIG_SMC911X_BASE 0xa8000000
#define CONFIG_SMC911X_32_BIT
/*
* Miscellaneous configurable options
*/

View file

@ -103,10 +103,6 @@
#define CONFIG_SH_SCIF_CLK_FREQ CONFIG_SYS_CLK_FREQ
#define TMU_CLK_DIVIDER (4) /* 4 (default), 16, 64, 256 or 1024 */
/* Ether */
#define CONFIG_SMC911X
#define CONFIG_SMC911X_BASE (0x10000000)
#define CONFIG_SMC911X_32_BIT
#define CONFIG_NFS_TIMEOUT 10000UL
/* I2C */

View file

@ -79,10 +79,6 @@
"nand erase 0x0 0x40000; " \
"nand write 0x81000000 0x0 0x40000\0"
#define CONFIG_SMC911X
#define CONFIG_SMC911X_BASE 0xB6000000
#define CONFIG_SMC911X_32_BIT
/*
* Miscellaneous configurable options
*/

View file

@ -85,10 +85,6 @@
/*
* Ethernet on the debug board (SMC911)
*/
#define CONFIG_SMC911X
#define CONFIG_SMC911X_16_BIT 1
#define CONFIG_SMC911X_BASE CS5_BASE_ADDR
#define CONFIG_HAS_ETH1
#define CONFIG_ETHPRIME

View file

@ -60,11 +60,6 @@
#define CONFIG_ETHPRIME "smc911x"
/*Support LAN9217*/
#define CONFIG_SMC911X
#define CONFIG_SMC911X_16_BIT
#define CONFIG_SMC911X_BASE CS1_BASE_ADDR
#define CONFIG_LOADADDR 0x72000000 /* loadaddr env var */
#define CONFIG_SYS_TEXT_BASE 0x77800000

View file

@ -83,13 +83,6 @@
/* USB EHCI */
#define CONFIG_SYS_USB_FAT_BOOT_PARTITION 1
/* SMSC911x Ethernet */
#if defined(CONFIG_CMD_NET)
#define CONFIG_SMC911X
#define CONFIG_SMC911X_32_BIT
#define CONFIG_SMC911X_BASE 0x2C000000
#endif /* CONFIG_CMD_NET */
/* Environment */
#define CONFIG_PREBOOT "usb start"

View file

@ -101,15 +101,6 @@
#endif
/*
* SMSC911x Ethernet
*/
#if defined(CONFIG_CMD_NET)
#define CONFIG_SMC911X
#define CONFIG_SMC911X_32_BIT
#define CONFIG_SMC911X_BASE 0x2C000000
#endif /* (CONFIG_CMD_NET) */
#define CONFIG_MTD_PARTITIONS
#define CONFIG_SYS_MTDPARTS_RUNTIME

View file

@ -236,13 +236,6 @@
#define CONFIG_ENV_OFFSET 0x260000
#define CONFIG_ENV_ADDR 0x260000
/* SMSC922x Ethernet */
#if defined(CONFIG_CMD_NET)
#define CONFIG_SMC911X
#define CONFIG_SMC911X_32_BIT
#define CONFIG_SMC911X_BASE 0x08000000
#endif /* (CONFIG_CMD_NET) */
/* Defines for SPL */
/* NAND: SPL falcon mode configs */

View file

@ -179,13 +179,6 @@
#define CONFIG_ENV_OFFSET 0x240000
#define CONFIG_ENV_ADDR 0x240000
/* Configure SMSC9211 ethernet */
#if defined(CONFIG_CMD_NET)
#define CONFIG_SMC911X
#define CONFIG_SMC911X_32_BIT
#define CONFIG_SMC911X_BASE 0x2C000000
#endif /* (CONFIG_CMD_NET) */
/* Initial RAM setup */
#define CONFIG_SYS_INIT_RAM_ADDR 0x4020f800
#define CONFIG_SYS_INIT_RAM_SIZE 0x800

View file

@ -153,12 +153,4 @@
#define CONFIG_ENV_OFFSET 0x260000
#define CONFIG_ENV_ADDR 0x260000
#ifdef CONFIG_CMD_NET
/* Ethernet (LAN9211 from SMSC9118 family) */
#define CONFIG_SMC911X
#define CONFIG_SMC911X_32_BIT
#define CONFIG_SMC911X_BASE DEBUG_BASE
#endif
#endif /* __CONFIG_H */

View file

@ -28,11 +28,6 @@
#define CONFIG_BITBANGMII_MULTI
#define CONFIG_SH_ETHER_SH7734_MII (0x00) /* MII */
#define CONFIG_SH_ETHER_PHY_MODE PHY_INTERFACE_MODE_MII
#ifndef CONFIG_SH_ETHER
# define CONFIG_SMC911X
# define CONFIG_SMC911X_16_BIT
# define CONFIG_SMC911X_BASE (0x84000000)
#endif
/* undef to save memory */
#define CONFIG_SYS_LONGHELP

View file

@ -67,9 +67,4 @@
#define CMT_CLK_DIVIDER 32 /* 8 (default), 32, 128 or 512 */
#define CONFIG_SH_CMT_CLK_FREQ (CONFIG_SYS_CLK_FREQ / CMT_CLK_DIVIDER)
/* Network interface */
#define CONFIG_SMC911X
#define CONFIG_SMC911X_16_BIT
#define CONFIG_SMC911X_BASE (0x24000000)
#endif /* __RSK7203_H */

View file

@ -56,9 +56,4 @@
#define CMT_CLK_DIVIDER 32 /* 8 (default), 32, 128 or 512 */
#define CONFIG_SH_CMT_CLK_FREQ (CONFIG_SYS_CLK_FREQ / CMT_CLK_DIVIDER)
/* Network interface */
#define CONFIG_SMC911X
#define CONFIG_SMC911X_16_BIT
#define CONFIG_SMC911X_BASE 0x28000000
#endif /* __RSK7264_H */

View file

@ -55,9 +55,4 @@
#define CMT_CLK_DIVIDER 32 /* 8 (default), 32, 128 or 512 */
#define CONFIG_SH_CMT_CLK_FREQ (CONFIG_SYS_CLK_FREQ / CMT_CLK_DIVIDER)
/* Network interface */
#define CONFIG_SMC911X
#define CONFIG_SMC911X_16_BIT
#define CONFIG_SMC911X_BASE 0x24000000
#endif /* __RSK7269_H */

View file

@ -174,9 +174,6 @@
* Ethernet Contoller driver
*/
#ifdef CONFIG_CMD_NET
#define CONFIG_SMC911X 1 /* we have a SMC9115 on-board */
#define CONFIG_SMC911X_16_BIT 1 /* SMC911X_16_BIT Mode */
#define CONFIG_SMC911X_BASE 0x98800300 /* SMC911X Drive Base */
#define CONFIG_ENV_SROM_BANK 3 /* Select SROM Bank-3 for Ethernet*/
#endif /* CONFIG_CMD_NET */

View file

@ -88,9 +88,6 @@
/* Ethernet Controllor Driver */
#ifdef CONFIG_CMD_NET
#define CONFIG_SMC911X
#define CONFIG_SMC911X_BASE 0x5000000
#define CONFIG_SMC911X_16_BIT
#define CONFIG_ENV_SROM_BANK 1
#endif /*CONFIG_CMD_NET*/

View file

@ -24,14 +24,6 @@
#define CONFIG_HOSTNAME twister
/*
* Miscellaneous configurable options
*/
#define CONFIG_SMC911X
#define CONFIG_SMC911X_16_BIT
#define CONFIG_SMC911X_BASE 0x2C000000
#define CONFIG_SMC911X_NO_EEPROM
#define CONFIG_EXTRA_ENV_SETTINGS CONFIG_TAM3517_SETTINGS \
"bootcmd=run nandboot\0"

View file

@ -28,14 +28,6 @@
/* FLASH related */
#define CONFIG_MTD_DEVICE
#define CONFIG_SMC911X_32_BIT
/* dummy: referenced by examples/standalone/smc911x_eeprom.c */
#define CONFIG_SMC911X_BASE 0
#ifdef CONFIG_MICRO_SUPPORT_CARD
#define CONFIG_SMC911X
#endif
#define CONFIG_FLASH_CFI_DRIVER
#define CONFIG_SYS_FLASH_CFI

View file

@ -65,33 +65,12 @@
#define CONFIG_SYS_LOAD_ADDR 0x80400000 /* default load address */
#if defined(CONFIG_VCT_PREMIUM) || defined(CONFIG_VCT_PLATINUM)
/*
* SMSC91C11x Network Card
*/
#define CONFIG_SMC911X
#define CONFIG_SMC911X_BASE 0x00000000
#define CONFIG_SMC911X_32_BIT
#define CONFIG_NET_RETRY_COUNT 20
#endif
/*
* Commands
*/
/*
* Only Premium/Platinum have ethernet support right now
*/
#if (defined(CONFIG_VCT_PREMIUM) || defined(CONFIG_VCT_PLATINUM)) && \
!defined(CONFIG_VCT_SMALL_IMAGE)
#endif
/*
* Only Premium/Platinum have USB-EHCI support right now
*/
#if (defined(CONFIG_VCT_PREMIUM) || defined(CONFIG_VCT_PLATINUM)) && \
!defined(CONFIG_VCT_SMALL_IMAGE)
#endif
#if defined(CONFIG_CMD_USB)
#define CONFIG_SUPPORT_VFAT
@ -236,7 +215,6 @@ int vct_gpio_get(int pin);
* (NOR/OneNAND) usage and Linux kernel booting.
*/
#if defined(CONFIG_VCT_SMALL_IMAGE)
#undef CONFIG_SMC911X
#undef CONFIG_SYS_I2C_SOFT
#undef CONFIG_SOURCE
#undef CONFIG_SYS_LONGHELP

View file

@ -102,13 +102,7 @@
/* Size of malloc() pool */
#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + (8 << 20))
/* Ethernet Configuration */
#ifdef CONFIG_TARGET_VEXPRESS64_JUNO
/* The real hardware Versatile express uses SMSC9118 */
#define CONFIG_SMC911X 1
#define CONFIG_SMC911X_32_BIT 1
#define CONFIG_SMC911X_BASE (0x018000000)
#else
#ifndef CONFIG_TARGET_VEXPRESS64_JUNO
/* The Vexpress64 simulators use SMSC91C111 */
#define CONFIG_SMC91111 1
#define CONFIG_SMC91111_BASE (0x01A000000)

View file

@ -55,7 +55,6 @@
#define V2M_NOR1 (V2M_PA_CS1)
#define V2M_SRAM (V2M_PA_CS2)
#define V2M_VIDEO_SRAM (V2M_PA_CS3 + 0x00000000)
#define V2M_LAN9118 (V2M_PA_CS3 + 0x02000000)
#define V2M_ISP1761 (V2M_PA_CS3 + 0x03000000)
/* Common peripherals relative to CS7. */
@ -133,11 +132,6 @@
#define CONFIG_SYS_TIMER_COUNTER (V2M_TIMER01 + 0x4)
#define CONFIG_SYS_TIMER_COUNTS_DOWN
/* SMSC9115 Ethernet from SMSC9118 family */
#define CONFIG_SMC911X 1
#define CONFIG_SMC911X_32_BIT 1
#define CONFIG_SMC911X_BASE V2M_LAN9118
/* PL011 Serial Configuration */
#define CONFIG_PL011_SERIAL
#define CONFIG_PL011_CLOCK 24000000

View file

@ -2044,11 +2044,6 @@ CONFIG_SLTTMR
CONFIG_SMC91111
CONFIG_SMC91111_BASE
CONFIG_SMC91111_EXT_PHY
CONFIG_SMC911X
CONFIG_SMC911X_16_BIT
CONFIG_SMC911X_32_BIT
CONFIG_SMC911X_BASE
CONFIG_SMC911X_NO_EEPROM
CONFIG_SMC_AUTONEG_TIMEOUT
CONFIG_SMC_USE_32_BIT
CONFIG_SMC_USE_IOFUNCS