Path remapping: Make behavior of diagnostics output dependent on presence of --remap-path-prefix.
This PR fixes a regression (#87745) with `--remap-path-prefix` where the flag stopped causing diagnostic messages to be remapped as well. The regression was introduced in https://github.com/rust-lang/rust/pull/83813 where we erroneously assumed that remapping of diagnostic messages was not desired anymore (because #70642 partially undid that functionality with nobody objecting).
The issue is fixed by making `--remap-path-prefix` remap diagnostic messages again, including for paths that have been remapped in upstream crates (e.g. the standard library). This means that "sysroot-localization" (implemented in #70642) is also disabled if `rustc` is invoked with `--remap-path-prefix`. The assumption is that once someone starts explicitly remapping paths they also don't want paths to their local Rust installation in their build output.
In the future we might want to give more fine-grained control over this behavior via compiler flags (see https://github.com/rust-lang/rfcs/pull/3127 for a related RFC). For now this PR is intended as a regression fix.
This PR is an alternative to https://github.com/rust-lang/rust/pull/88191, which makes diagnostic messages be remapped unconditionally. That approach, however, would effectively revert #70642.
Fixes https://github.com/rust-lang/rust/issues/87745.
cc `@cbeuw`
r? `@ghost`
Fix `option_if_let_else`
fixes: #5822fixes: #6737fixes: #7567
The inference from #6137 still exists so I'm not sure if this should be moved from the nursery. Before doing that though I'd almost want to see this split into two lints. One suggesting `map_or` and the other suggesting `map_or_else`.
`map_or_else` tends to have longer expressions for both branches so it doesn't end up much shorter than a match expression in practice. It also seems most people find it harder to read. `map_or` at least has the terseness benefit of being on one line most of the time, especially when the `None` branch is just a literal or path expression.
changelog: `break` and `continue` statments local to the would-be closure are allowed in `option_if_let_else`
changelog: don't lint in const contexts in `option_if_let_else`
changelog: don't lint when yield expressions are used in `option_if_let_else`
changelog: don't lint when the captures made by the would-be closure conflict with the other branch in `option_if_let_else`
changelog: don't lint when a field of a local is used when the type could be pontentially moved from in `option_if_let_else`
changelog: in some cases, don't lint when scrutinee expression conflicts with the captures of the would-be closure in `option_if_let_else`
Add module_style lint to style
changelog: Add new [`module_style`] style lint
This is a configurable (no mod file/mod file) lint that determines if `mod.rs` is used consistently or if `mod.rs` is never used (using the new mod layout).
Don't report function calls as unnecessary operation if used in array index
Attempts to fix: #7412
changelog: Don't report function calls used in indexing as unnecessary operation. [`unnecessary_operation`]
Add tests for disallowed_mod in ui-cargo test section
Use correct algorithm to determine if mod.rs is missing
Move to two lints and remove config option
Switch lint names so they read "warn on ..."
Emit the same help info for self_named_mod_file warnings
Bail when both lints are Allow
Reword help message for both module_style lints
Add new lint `negative_feature_names` and `redundant_feature_names`
Add new lint [`negative_feature_names`] to detect feature names with prefixes `no-` or `not-` and new lint [`redundant_feature_names`] to detect feature names with prefixes `use-`, `with-` or suffix `-support`
changelog: Add new lint [`negative_feature_names`] and [`redundant_feature_names`]
New lint `manual_split_once`
This is a WIP because it still needs to recognize more patterns. Currently handles:
```rust
s.splitn(2, ' ').next();
s.splitn(2, ' ').nth(0)
s.splitn(2, ' ').nth(1);
s.splitn(2, ' ').skip(0).next();
s.splitn(2, ' ').skip(1).next();
s.splitn(2, ' ').next_tuple(); // from itertools
// as well as `unwrap()` and `?` forms
```
Still to do:
```rust
let mut iter = s.splitn(2, ' ');
(iter.next().unwrap(), iter.next()?)
let mut iter = s.splitn(2, ' ');
let key = iter.next().unwrap();
let value = iter.next()?;
```
Suggestions on other patterns to check for would be useful. I've done a search on github for uses of `splitn`. Still have yet to actually look through the results.
There's also the question of whether the lint shouold trigger on all uses of `splitn` with two values, or only on recognized usages. The former could have false positives where it couldn't be replaced, but I'm not sure how common that would be.
changelog: Add lint `manual_split_once`
* `break` and `continue` statments local to the would-be closure are allowed
* don't lint in const contexts
* don't lint when yield expressions are used
* don't lint when the captures made by the would-be closure conflict with the other branch
* don't lint when a field of a local is used when the type could be pontentially moved from
* in some cases, don't lint when scrutinee expression conflicts with the captures of the would-be closure
Uplift the invalid_atomic_ordering lint from clippy to rustc
This is mostly just a rebase of https://github.com/rust-lang/rust/pull/79654; I've copy/pasted the text from that PR below.
r? `@lcnr` since you reviewed the last one, but feel free to reassign.
---
This is an implementation of https://github.com/rust-lang/compiler-team/issues/390.
As mentioned, in general this turns an unconditional runtime panic into a (compile time) lint failure. It has no false positives, and the only false negatives I'm aware of are if `Ordering` isn't specified directly and is comes from an argument/constant/whatever.
As a result of it having no false positives, and the alternative always being strictly wrong, it's on as deny by default. This seems right.
In the [zulip stream](https://rust-lang.zulipchat.com/#narrow/stream/233931-t-compiler.2Fmajor-changes/topic/Uplift.20the.20.60invalid_atomic_ordering.60.20lint.20from.20clippy/near/218483957) `@joshtriplett` suggested that lang team should FCP this before landing it. Perhaps libs team cares too?
---
Some notes on the code for reviewers / others below
## Changes from clippy
The code is changed from [the implementation in clippy](68cf94f6a6/clippy_lints/src/atomic_ordering.rs) in the following ways:
1. Uses `Symbols` and `rustc_diagnostic_item`s instead of string literals.
- It's possible I should have just invoked Symbol::intern for some of these instead? Seems better to use symbol, but it did require adding several.
2. The functions are moved to static methods inside the lint struct, as a way to namespace them.
- There's a lot of other code in that file — which I picked as the location for this lint because `@jyn514` told me that seemed reasonable.
3. Supports unstable AtomicU128/AtomicI128.
- I did this because it was almost easier to support them than not — not supporting them would have (ideally) required finding a way not to give them a `rustc_diagnostic_item`, which would have complicated an already big macro.
- These don't have tests since I wasn't sure if/how I should make tests conditional on whether or not the target has the atomic... This is to a certain extent an issue of 64bit atomics too, but 128-bit atomics are much less common. Regardless, the existing tests should be *more* than thorough enough here.
4. Minor changes like:
- grammar tweaks ("loads cannot have `Release` **and** `AcqRel` ordering" => "loads cannot have `Release` **or** `AcqRel` ordering")
- function renames (`match_ordering_def_path` => `matches_ordering_def_path`),
- avoiding clippy-specific helper methods that don't exist in rustc_lint and didn't seem worth adding for this case (for example `cx.struct_span_lint` vs clippy's `span_lint_and_help` helper).
## Potential issues
(This is just about the code in this PR, not conceptual issues with the lint or anything)
1. I'm not sure if I should have used a diagnostic item for `Ordering` and its variants (I couldn't figure out how really, so if I should do this some pointers would be appreciated).
- It seems possible that failing to do this might possibly mean there are more cases this lint would miss, but I don't really know how `match_def_path` works and if it has any pitfalls like that, so maybe not.
2. I *think* I deprecated the lint in clippy (CC `@flip1995` who asked to be notified about clippy changes in the future in [this comment](https://github.com/rust-lang/rust/pull/75671#issuecomment-718731659)) but I'm not sure if I need to do anything else there.
- I'm kind of hoping CI will catch if I missed anything, since `x.py test src/tools/clippy` fails with a lot of errors with and without my changes (and is probably a nonsense command regardless). Running `cargo test` from src/tools/clippy also fails with unrelated errors that seem like refactorings that didnt update clippy? So, honestly no clue.
3. I wasn't sure if the description/example I gave good. Hopefully it is. The example is less thorough than the one from clippy here: https://rust-lang.github.io/rust-clippy/master/index.html#invalid_atomic_ordering. Let me know if/how I should change it if it needs changing.
4. It pulls in the `if_chain` crate. This crate was already used in clippy, and seems like it's used elsewhere in rustc, but I'm willing to rewrite it to not use this if needed (I'd prefer not to, all things being equal).
- Deprecate clippy::invalid_atomic_ordering
- Use rustc_diagnostic_item for the orderings in the invalid_atomic_ordering lint
- Reduce code duplication
- Give up on making enum variants diagnostic items and just look for
`Ordering` instead
I ran into tons of trouble with this because apparently the change to
store HIR attrs in a side table also gave the DefIds of the
constructor instead of the variant itself. So I had to change
`matches_ordering` to also check the grandparent of the defid as well.
- Rename `atomic_ordering_x` symbols to just the name of the variant
- Fix typos in checks - there were a few places that said "may not be
Release" in the diagnostic but actually checked for SeqCst in the lint.
- Make constant items const
- Use fewer diagnostic items
- Only look at arguments after making sure the method matches
This prevents an ICE when there aren't enough arguments.
- Ignore trait methods
- Only check Ctors instead of going through `qpath_res`
The functions take values, so this couldn't ever be anything else.
- Add if_chain to allowed dependencies
- Fix grammar
- Remove unnecessary allow
Manual map 7413
fixes: #7413
This only fixes the specific problem from #7413, not the general case. The full fix requires interacting with the borrow checker to determine the lifetime of all the borrows made in the function. I'll open an issue about it later.
changelog: Don't suggest using `map` when the option is borrowed in the match, and also consumed in the arm.
changelog: Locals declared within the would-be closure will not prevent the closure from being suggested in `manual_map` and `map_entry`
Add `unwrap_or_else_default` lint
---
*Please write a short comment explaining your change (or "none" for internal only changes)*
changelog: Add a new [`unwrap_or_else_default`] style lint. This will catch `unwrap_or_else(Default::default)` on Result and Option and suggest `unwrap_or_default()` instead.
`never_loop`: suggest using an `if let` instead of a `for` loop
changelog: suggest using an `if let` statement instead of a `for` loop that [`never_loop`]s
Fixes#7537, r? `@camsteffen.`
Cleanup usage of `span_to_snippet` and `LintContext::sess`
- avoid using `SourceMap::span_to_snippet` directly and use `clippy_utils::source::snippet_opt` instead
- don't use `LintContext::sess()` on `EarlyContext`s which have a `sess` field directly available, saving the import of `LintContext`
changelog: none
Don't emit `too_many_lines` for closures
changelog: don't emit the [`too_many_lines`] lint inside closures to avoir duplicated diagnostics.
Fixes#7517.
rustc: Replace `HirId`s with `LocalDefId`s in `AccessLevels` tables
and passes using those tables - primarily privacy checking, stability checking and dead code checking.
All these passes work with definitions rather than with arbitrary HIR nodes.
r? `@cjgillot`
cc `@lambinoo` (#87487)
rfc3052 followup: Remove authors field from Cargo manifests
Since RFC 3052 soft deprecated the authors field, hiding it from
crates.io, docs.rs, and making Cargo not add it by default, and it is
not generally up to date/useful information for contributors, we may as well
remove it from crates in this repo.
Since RFC 3052 soft deprecated the authors field anyway, hiding it from
crates.io, docs.rs, and making Cargo not add it by default, and it is
not generally up to date/useful information, we should remove it from
crates in this repo.
Update lint documentation to use markdown headlines
This PR updates all lint documentation to use markdown headlines. It additionally removed the *Known problems* section for lints without any problems. I've double-checked all automatic replacements, but a second pair of eyes is definitely appreciated!
I wasn't sure when you wanted to switch to the new metadata collection tomorrow, I therefore prepared this PR today. And that's it this is a standalone PR to keep the other related PRs reviewable.
changelog: none
r? `@flip1995`
cc: #7172
Note: This should be merged with the other metadata collection related PRs.
Switch CI to new metadata collection
r? `@xFrednet`
Things we have to keep in mind:
- This removes the template files and the scripts used for deployment from the checkout. This was added in #5517. I don't think we ever needed those there. Not sure though.
- ~~As a result, we can't remove the python scripts yet. We have to wait until this hits a stable Clippy release.~~ I'll just break the next stable deploy and do it by hand once.
- This should be merged together with #7279. Me and `@xFrednet` will coordinate the switch
- ...?
I still have to try out some things:
- [x] Is it worth caching? Yes
- [x] ~~Is it worth to do a release build?~~ Nope
- [x] Does it actually work? With a few changes, yes
- [ ] ...?
changelog: Clippy now uses a lint to generate its documentation 🎉
Changes included:
- Minimum adaption to the new `lints.json` format
- Fixing filtering for the new `lints.json` format; hardcoding the
lint groups in the index
- Recreating the original doc styling for the new format
- Fixed sytax highlighting for rust,ignore code blocks
- Fixed markdown table extraction in the metadata collector and
fixed lint level output
- Adding the additional information row for lints
- Changed the website title to Clippy's lint list
- Flexing the website for mobile users
- Added (?) references for lint levels and groups
- Making deprecated lints look dead
- Removed JS code block language extraction in favor of a rust
implementation `rust-clippy#7352`
- Added the suspicious lint group to the lint list
- Remove trailing whitespaces from index.html
- Fix code highlighting
- Use default value if the docVersion is empty
Co-authored-by: Philipp Krones <hello@philkrones.com>
This updates all the deploy scripts and the deploy workflow.
The deploy workflow now runs the metadata collector to collect the lint
documentation. It also changes the files that are checked out in the
deploy workflow from master and adds an explanation why we have to do
this.
Fix docs of disallowed_type
Add ability to name primitive types without import path
Move primitive resolution to clippy_utils path_to_res fn
Refactor Res matching, fix naming and docs from review
Use tcx.def_path_str when emitting the lint
Use diagnostic items where possible
Clippy still uses a bunch of paths in places that could easily use already defined diagnostic items. This PR updates all references to such paths and also removes a bunch of them that are no longer needed after this cleanup.
Some paths are also used to construct new paths and can therefore not be removed that easily. I've added a doc comment to those instances that recommends the use of the diagnostic item where possible.
And that's it, cleaning crew signing off 🧹🗑️
---
changelog: none
(only internal improvements)
cc: #5393
Prefer a code snipped over formatting the self type (`new_without_default`)
Fixes: rust-lang/rust-clippy#7220
changelog: [`new_without_default`]: The `Default` impl block type doesn't use the full type path qualification
Have a nice day to everyone reading this 🙃
Some `clippy::author` improvements
changelog: none
* Use `Debug` instead of re-implementing it for some things
* Fix block trailing expression handing
* Don't double print on stmt/expr with `#[clippy::author]` attribute
similar_names: No longer suggest inserting or appending an underscore
changelog: [`similar_names`] lint no longer suggests to insert or add an underscore to "fix" too similar names
New lint: [`self_named_constructor`]
Adds the `self_named_constructor` lint for detecting when an implemented method has the same name as the type it is implemented for.
changelog: [`self_named_constructor`]
closes: #7142
Remove refs from Pat slices
Changes `PatKind::Or(&'hir [&'hir Pat<'hir>])` to `PatKind::Or(&'hir [Pat<'hir>])` and others. This is more consistent with `ExprKind`, saves a little memory, and is a little easier to use.
FP fix and documentation for `branches_sharing_code` lint
Closesrust-lang/rust-clippy#7369
Related rust-lang/rust-clippy#7452 I'm still thinking about the best way to fix this. I could simply add another visitor to ensure that the moved expressions don't modify values being used in the condition, but I'm not totally happy with this due to the complexity. I therefore only documented it for now
changelog: [`branches_sharing_code`] fixed false positive where block expressions would sometimes be ignored.
Fix internal `default_hash_types` lint to use resolved path
I run into false positives now and then (mostly in Clippy) when I want to name some util after HashMap.
Don't suggest doc(hidden) or unstable variants in wildcard lint
Clippy's wildcard lint would suggest doc(hidden) and unstable variants for non_exhaustive enums, even though those aren't part of the public interface (yet) and should only be matched on using a `_`, just like potential future additions to the enum. There was already some logic to exclude a *single* doc(hidden) variant. This extends that to all hidden variants, and also hides `#[unstable]` variants.
See https://github.com/rust-lang/rust/pull/85746#issuecomment-868886893
This PR includes https://github.com/rust-lang/rust-clippy/pull/7406 as the first commit.
Here's the diff that this PR adds on top of that PR: https://github.com/m-ou-se/rust-clippy/compare/std-errorkind...m-ou-se:doc-hidden-variants
---
*Please write a short comment explaining your change (or "none" for internal only changes)*
changelog: No longer suggest unstable and doc(hidden) variants in wildcard lint. wildcard_enum_match_arm, match_wildcard_for_single_variants
This fixes a bug where match_wildcard_for_single_variants produced a
bad suggestion where besides the missing variant, one or more hidden
variants were left.
This also adds tests to the ui-tests match_wildcard_for_single_variants
and wildcard_enum_match_arm to make sure that the correct suggestion is
produced.
New lint: `disallowed_script_idents`
This PR implements a new lint to restrict locales that can be used in the code,
as proposed in #7376.
Current concerns / unresolved questions:
- ~~Mixed usage of `script` (as a Unicode term) and `locale` (as something that is easier to understand for the broad audience). I'm not sure whether these terms are fully interchangeable and whether in the current form it is more confusing than helpful.~~ `script` is now used everywhere.
- ~~Having to mostly copy-paste `AllowedScript`. Probably it's not a big problem, as the list of scripts is standardized and is unlikely to change, and even if we'd stick to the `unicode_script::Script`, we'll still have to implement custom deserialization, and I don't think that it will be shorter in terms of the amount of LoC.~~ `unicode::Script` is used together with a filtering deserialize function.
- Should we stick to the list of "recommended scripts" from [UAX #31](http://www.unicode.org/reports/tr31/#Table_Recommended_Scripts) in the configuration?
*Please write a short comment explaining your change (or "none" for internal only changes)*
changelog: ``[`disallowed_script_idents`]``
r? `@Manishearth`
Improve lint message for match-same-arms lint
fixes#7331
Follow-up to #7377
This PR improves the lint message for `match-same-arms` lint and adds `todo!(..)` example to the lint docs.
*Please write a short comment explaining your change (or "none" for internal only changes)*
changelog: None
Do not spawn blacklisted_name lint in test context
---
fixed#7305
*Please write a short comment explaining your change (or "none" for internal only changes)*
changelog: `blacklisted_name` lint is not spawned in the test context anymore.
Fix detecting of the 'test' attribute
Update UI test to actually check that warning is not triggered in the test code
Fix approach for detecting the test module
Add nested test case
Remove code duplication by extracting 'is_test_module_or_function' into 'clippy_utils'
Cleanup the code
Add import_rename lint, this adds a field on the Conf struct
fixes#7276
changelog: Add ``[`import_rename`]`` a lint that enforces import renaming defined in the config file.
Fixed broken deploy script due to multiline configuration docs
The deploy script on master currently runs into an error (See [log](https://github.com/rust-lang/rust-clippy/runs/2865828873)) due to the new configuration documentation added in #7299. The current documentation collection for the configuration macro sadly doesn't support multiline doc comments. This will be changes in the future with the new metadata collector tracked in #7172 For now we have to use `<br>` inside doc comments to add paragraphs.
This PR restricts `define_Conf!` macro to single lines and adds a comment explaining the reasoning behind it. It also adjusted the actual document parsing to fix a bug. (The parsing was automatically stopping on the first curly bracket, even if it was part of a doc comment).
changelog: none
Problem:
for code like
````
fn main() {
println!("Hello, world!");
}
````
clippy will issue a warning to use a clippy.toml option instead:
````
warning: lint `clippy::wrong_pub_self_convention` has been removed: set the `avoid_breaking_exported_api` config option to `false` to enable the `wrong_self_convention` lint for public items
--> src/main.rs:2:9
|
2 | #![warn(clippy::wrong_pub_self_convention)]
| ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
|
= note: `#[warn(renamed_and_removed_lints)]` on by default
````
But using the lint name as seen in the warning message
echo "avoid_breaking_exported_api = true\n" > clippy.toml
Will cause an error:
````
error: error reading Clippy's configuration file `/tmp/clippytest/clippy.toml`: unknown field `avoid_breaking_exported_api`, expected one of `avoid-breaking-exported-api`, ...
````
Replace the underscores with dashes in the deprecation message.
changelog: avoid_breaking_exported_api: suggest correct clippy config toml option in the deprecation message
Add macro_braces lint to check for irregular brace use in certain macros
The name is a bit long but this sounds good as `#[allow(unconventional_macro_braces)]` and it seems more clear that we are talking about the macro call not macro definitions, any feedback let me know. Thanks!
fixes#7278
changelog: Add ``[`unconventional_macro_braces`]`` lint that checks for uncommon brace usage with macros.
Remove some last remants of {push,pop}_unsafe!
These macros have already been removed, but there was still some code handling these macros. That code is now removed.
Rename unconventional -> nonstandard, add config field
Add standard_macro_braces fields so users can specify macro names and
brace combinations to lint for in the clippy.toml file.
Fix errors caused by nonstandard_macro_braces in other lint tests
Fix users ability to override the default nonstandard macro braces
Add type position macros impl `check_ty`
Remove requirement of fully qualified path for disallowed_method/type
changelog: Remove the need for fully qualified paths in disallowed_method and disallowed_type
After fixing this issue in [import_rename](https://github.com/rust-lang/rust-clippy/pull/7300#discussion_r650127720) I figured I'd fix it for these two.
If this does in fact fix the **Known problems:** section I was planning to remove them from both lints after confirmation.
Vec extend to append
This PR adds a check to suggest changes of vector from
```
vec.extend(other_vec.drain(..))
```
could be written as
```
vec![].append(&mut vec![]);
```
changelog: Add vec_extend_to_append lint
issue: #7209
Don't trigger `field_reassign_with_default` in macros
Fixes#7155
Producing a good suggestion for this lint is already hard when no macros
are involved. With macros the lint message and the suggestion are just
confusing. Since both, producing a good suggestion and figuring out if
this pattern can be re-written inside a macro is nearly impossible, just
bail out.
changelog: [`field_reassign_with_default`] No longer triggers in macros
---
No that our reviewing queue is under control, I want to start hacking on Clippy myself again. Starting with an easy issue to get back in :)
Add disallowed_type lint, this adds a field to the conf struct
Fixes#7277
changelog: Add ``[`disallowed_type`]`` a lint that can enforce banning types specified in the config.
Fix false positive on `semicolon_if_nothing_returned`
Currently the [`semicolon_if_nothing_returned`](https://rust-lang.github.io/rust-clippy/master/index.html#semicolon_if_nothing_returned) lint fires in unwanted situations where a block only spans one line. An example of this was given in #7324. This code:
```rust
use std::mem::MaybeUninit;
use std::ptr;
fn main() {
let mut s = MaybeUninit::<String>::uninit();
let _d = || unsafe { ptr::drop_in_place(s.as_mut_ptr()) };
}
```
yields the following clippy error:
```
error: consider adding a `;` to the last statement for consistent formatting
--> src/main.rs:6:26
|
6 | let _d = || unsafe { ptr::drop_in_place(s.as_mut_ptr()) };
| ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ help: add a `;` here: `ptr::drop_in_place(s.as_mut_ptr());`
|
= note: `-D clippy::semicolon-if-nothing-returned` implied by `-D clippy::pedantic`
= help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#semicolon_if_nothing_returned
```
I updated the lint to check if the statement is inside an `unsafe` block, a closure or a normal block and if the block only spans one line, in that case the lint is not emitted.
This closes#7324.
changelog: enhanced semicolon if nothing returned according to #7324.
Refactoring identity function lints
I've noticed that we have several lints that all check for identity functions and each used their own check implementation. I moved the `is_expr_identity_function` function to `clippy_utils` and adapted all lints to reuse that one function. This should make the addition of new lints like this also easier in the future.
I've also moved the `map_identity` lint into the `methods` module. It's probably the best to review this PR by checking each commit individually. And that's it, have a great day 🙃
changelog: none
fix `while_let_on_iterator` suggestion in a closure
fixes: #7249
A future improvement would be to check if the closure is being used as `FnOnce`, in which case the original suggestion would be correct.
changelog: Suggest `&mut iter` inside a closure for `while_let_on_iterator`
Fix missing_docs_in_private_items false negative
changelog: Fix [`missing_docs_in_private_items`] false negative when the item has any `#[name = "value"]` attribute
Closes#7247 (decided not to use the rustc method since it calls `Session::check_name`, which is for rustc only)
Fix allow on some statement lints
changelog: Fix `#[allow(..)]` over statements for [`needless_collect`], [`short_circuit_statement`] and [`unnecessary_operation`]
Fixes#7171Fixes#7202
Add avoid_breaking_exported_api config option
changelog: Add `avoid_breaking_exported_api` config option for [`enum_variant_names`], [`large_types_passed_by_value`], [`trivially_copy_pass_by_ref`], [`unnecessary_wraps`], [`upper_case_acronyms`] and [`wrong_self_convention`].
changelog: Deprecates [`pub_enum_variant_names`] and [`wrong_pub_self_convention`] as the non-pub variants are now configurable.
changelog: Fix various false negatives for `pub` items that are not exported from the crate.
A couple changes to late passes in order to use `cx.access_levels.is_exported` rather than `item.vis.kind.is_pub`.
I'm not sure how to better document the config option or lints that are (not) affected (see comments in #6806). Suggestions are welcome. cc `@rust-lang/clippy`
I added `/clippy.toml` to use the config internally and `/tests/clippy.toml` to maintain a default config in ui tests.
Closes#6806Closes#4504
Fix invalid syntax in `from_iter_instead_of_collect` suggestion
First attempt at contributing, hopefully this is a good start and can be improved. :)
fixes#7259
changelog: [`from_iter_instead_of_collect`] fix invalid suggestion involving "as Trait"
Fix `redundant_closure` for `vec![]` macro in a closure with arguments
fixes: #7224
changelog: Fix `redundant_closure` for `vec![]` macro in a closure with arguments
This speeds up the metadata collection by 2-2.5x on my machine. During
metadata collection other lint passes don't have to be registered, only
the lints themselves.
Implement the new desugaring from `try_trait_v2`
~~Currently blocked on https://github.com/rust-lang/rust/issues/84782, which has a PR in https://github.com/rust-lang/rust/pull/84811~~ Rebased atop that fix.
`try_trait_v2` tracking issue: https://github.com/rust-lang/rust/issues/84277
Unfortunately this is already touching a ton of things, so if you have suggestions for good ways to split it up, I'd be happy to hear them. (The combination between the use in the library, the compiler changes, the corresponding diagnostic differences, even MIR tests mean that I don't really have a great plan for it other than trying to have decently-readable commits.
r? `@ghost`
~~(This probably shouldn't go in during the last week before the fork anyway.)~~ Fork happened.
Don't lint `multiple_inherent_impl` with generic arguments
fixes: #5772
changelog: Treat different generic arguments as different types in `multiple_inherent_impl`
This enables the same warnings that are enabled in `clippy_lints` also
in `clippy_utils` and `clippy_dev`. Then it makes sure, that the
`deny-warnings` feature is passed down to `clippy_lints` and
`clippy_utils` when compiling Clippy.
Remove powi, "square can be computed more efficiently"
powi(2) produces exactly the same native code as x * x
powi was part of the [`suboptimal_flops`] lint
fixes#7058
changelog: Remove powi [`suboptimal_flops`], "square can be computed more efficiently"
Add `needless_bitwise_bool` lint
fixes#6827fixes#1594
changelog: Add ``[`needless_bitwise_bool`]`` lint
Creates a new `bitwise_bool` lint to convert `x & y` to `x && y` when both `x` and `y` are booleans. I also had to adjust thh `needless_bool` lint slightly, and fix a couple failing dogfood tests. I made it a correctness lint as per flip1995's comment [here](https://github.com/rust-lang/rust-clippy/pull/3385#issuecomment-434715723), from a previous WIP attempt at this lint.
Fix FPs about generic args
Fix 2 false positives in [`use_self`] and [`useless_conversion`] lints, by taking into account generic args and comparing them.
Fixes: #7205Fixes: #7206
changelog: Fix FPs about generic args in [`use_self`] and [`useless_conversion`] lints
New lint: `unused_async`
changelog: Adds a lint, `unused_async`, which checks for async functions with no await statements
`unused_async` is a lint that reduces code smell and overhead by encouraging async functions to be refactored into synchronous functions.
Fixes#7176
### Examples
```rust
async fn get_random_number() -> i64 {
4 // Chosen by fair dice roll. Guaranteed to be random.
}
```
Could be written as:
```rust
fn get_random_number() -> i64 {
4 // Chosen by fair dice roll. Guaranteed to be random.
}
```
Something like this, however, should **not** be caught by clippy:
```rust
#[async_trait]
trait AsyncTrait {
async fn foo();
}
struct Bar;
#[async_trait]
impl AsyncTrait for Bar {
async fn foo() {
println!("bar");
}
}
```
Stop linting `else if let` pattern in [`option_if_let_else`] lint
For readability concerns, it is counterproductive to lint `else if let` pattern.
Unfortunately the suggested code is much less readable.
Fixes: #7006
changelog: stop linting `else if let` pattern in [`option_if_let_else`] lint
Remove CrateNum parameter for queries that only work on local crate
The pervasive `CrateNum` parameter is a remnant of the multi-crate rustc idea.
Using `()` as query key in those cases avoids having to worry about the validity of the query key.
Metadata collection monster searching for Clippy's configuration options
This PR teaches our lovely metadata collection monster which configurations are available inside Clippy. It then adds a new *Configuration* section to the lint documentation.
---
The implementation uses the `define_Conf!` macro to create a vector of metadata during compilation. This enables easy collection and parsing without the need of searching for the struct during a lint-pass (and it's quite elegant IMO). The information is then parsed into an intermediate struct called `ClippyConfiguration` which will be saved inside the `MetadataCollector` struct itself. It is currently only used to generate the *Configuration* section in the lint documentation, but I'm thinking about adding an overview of available configurations to the website. Saving them in this intermediate state without formatting them right away enables this in the future.
The new parsing will also allow us to have a documentation that spans over multiple lines in the future. For example, this will be valid when the old script has been removed:
```rust
/// Lint: BLACKLISTED_NAME.
/// The list of blacklisted names to lint about. NB: `bar` is not here since it has legitimate uses
(blacklisted_names: Vec<String> = ["foo", "baz", "quux"].iter().map(ToString::to_string).collect())
```
The deprecation reason is also currently being collected but not used any further and that's basically it.
---
See: #7172 for the full metadata collection to-do list or to suggest a new feature in connection to it 🙃
---
changelog: none
r? `@flip1995`
cc `@camsteffen` It would be great if you could also review this PR as you have recently worked on Clippy's `define_Conf!` macro.
`needless_collect` enhancements
fixes#7164
changelog: `needless_collect`: For `BTreeMap` and `HashMap` lint only `is_empty`, as `len` might produce different results than iter's `count`
changelog: `needless_collect`: Lint `LinkedList` and `BinaryHeap` in direct usage case as well
Trigger [`wrong_self_convention`] only if it has implicit self
Lint [`wrong_self_convention`] only if the impl or trait has `self` _per sé_.
Fixes: #7179
changelog: trigger [`wrong_self_convention`] only if it has implicit self
match_single_binding: Fix invalid suggestion when match scrutinee has side effects
fixes#7094
changelog: `match_single_binding`: Fix invalid suggestion when match scrutinee has side effects
---
`Expr::can_have_side_effects` is used to determine the scrutinee has side effects, while this method is a little bit conservative for our use case. But I'd like to use it to avoid reimplementation of the method and too much heuristics. If you think this is problematic, then I'll implement a custom visitor to address it.
* Suggest `&mut iter` when the iterator is used after the loop.
* Suggest `&mut iter` when the iterator is a field in a struct.
* Don't lint when the iterator is a field in a struct, and the struct is
used in the loop.
* Lint when the loop is nested in another loop, but suggest `&mut iter`
unless the iterator is from a local declared inside the loop.
Fix `--remap-path-prefix` not correctly remapping `rust-src` component paths and unify handling of path mapping with virtualized paths
This PR fixes#73167 ("Binaries end up containing path to the rust-src component despite `--remap-path-prefix`") by preventing real local filesystem paths from reaching compilation output if the path is supposed to be remapped.
`RealFileName::Named` introduced in #72767 is now renamed as `LocalPath`, because this variant wraps a (most likely) valid local filesystem path.
`RealFileName::Devirtualized` is renamed as `Remapped` to be used for remapped path from a real path via `--remap-path-prefix` argument, as well as real path inferred from a virtualized (during compiler bootstrapping) `/rustc/...` path. The `local_path` field is now an `Option<PathBuf>`, as it will be set to `None` before serialisation, so it never reaches any build output. Attempting to serialise a non-`None` `local_path` will cause an assertion faliure.
When a path is remapped, a `RealFileName::Remapped` variant is created. The original path is preserved in `local_path` field and the remapped path is saved in `virtual_name` field. Previously, the `local_path` is directly modified which goes against its purpose of "suitable for reading from the file system on the local host".
`rustc_span::SourceFile`'s fields `unmapped_path` (introduced by #44940) and `name_was_remapped` (introduced by #41508 when `--remap-path-prefix` feature originally added) are removed, as these two pieces of information can be inferred from the `name` field: if it's anything other than a `FileName::Real(_)`, or if it is a `FileName::Real(RealFileName::LocalPath(_))`, then clearly `name_was_remapped` would've been false and `unmapped_path` would've been `None`. If it is a `FileName::Real(RealFileName::Remapped{local_path, virtual_name})`, then `name_was_remapped` would've been true and `unmapped_path` would've been `Some(local_path)`.
cc `@eddyb` who implemented `/rustc/...` path devirtualisation
Metadata collection monster eating deprecated lints
This adds the collection of deprecated lints to the metadata collection monster. The JSON output has the same structure with the *new* lint group "DEPRECATED". Here is one of fourteen examples it was able to dig up in Clippy's code:
```JSON
{
"id": "assign_op_pattern",
"id_span": {
"path": "src/assign_ops.rs",
"line": 34
},
"group": "clippy::style",
"docs": " **What it does:** Checks for `a = a op b` or `a = b commutative_op a` patterns.\n\n **Why is this bad?** These can be written as the shorter `a op= b`.\n\n **Known problems:** While forbidden by the spec, `OpAssign` traits may have\n implementations that differ from the regular `Op` impl.\n\n **Example:**\n ```rust\n let mut a = 5;\n let b = 0;\n // ...\n // Bad\n a = a + b;\n\n // Good\n a += b;\n ```\n",
"applicability": {
"is_multi_part_suggestion": false,
"applicability": "MachineApplicable"
}
}
```
And you! Yes you! Sir or Madam can get all of this **for free** in Clippy if this PR gets merged. (Sorry for the silliness ^^)
---
See: #7172 for the full metadata collection to-do list or to suggest a new feature in connection to it 🙃
---
changelog: none
r? `@flip1995`
This PR implements span quoting, allowing proc-macros to produce spans
pointing *into their own crate*. This is used by the unstable
`proc_macro::quote!` macro, allowing us to get error messages like this:
```
error[E0412]: cannot find type `MissingType` in this scope
--> $DIR/auxiliary/span-from-proc-macro.rs:37:20
|
LL | pub fn error_from_attribute(_args: TokenStream, _input: TokenStream) -> TokenStream {
| ----------------------------------------------------------------------------------- in this expansion of procedural macro `#[error_from_attribute]`
...
LL | field: MissingType
| ^^^^^^^^^^^ not found in this scope
|
::: $DIR/span-from-proc-macro.rs:8:1
|
LL | #[error_from_attribute]
| ----------------------- in this macro invocation
```
Here, `MissingType` occurs inside the implementation of the proc-macro
`#[error_from_attribute]`. Previosuly, this would always result in a
span pointing at `#[error_from_attribute]`
This will make many proc-macro-related error message much more useful -
when a proc-macro generates code containing an error, users will get an
error message pointing directly at that code (within the macro
definition), instead of always getting a span pointing at the macro
invocation site.
This is implemented as follows:
* When a proc-macro crate is being *compiled*, it causes the `quote!`
macro to get run. This saves all of the sapns in the input to `quote!`
into the metadata of *the proc-macro-crate* (which we are currently
compiling). The `quote!` macro then expands to a call to
`proc_macro::Span::recover_proc_macro_span(id)`, where `id` is an
opaque identifier for the span in the crate metadata.
* When the same proc-macro crate is *run* (e.g. it is loaded from disk
and invoked by some consumer crate), the call to
`proc_macro::Span::recover_proc_macro_span` causes us to load the span
from the proc-macro crate's metadata. The proc-macro then produces a
`TokenStream` containing a `Span` pointing into the proc-macro crate
itself.
The recursive nature of 'quote!' can be difficult to understand at
first. The file `src/test/ui/proc-macro/quote-debug.stdout` shows
the output of the `quote!` macro, which should make this eaier to
understand.
This PR also supports custom quoting spans in custom quote macros (e.g.
the `quote` crate). All span quoting goes through the
`proc_macro::quote_span` method, which can be called by a custom quote
macro to perform span quoting. An example of this usage is provided in
`src/test/ui/proc-macro/auxiliary/custom-quote.rs`
Custom quoting currently has a few limitations:
In order to quote a span, we need to generate a call to
`proc_macro::Span::recover_proc_macro_span`. However, proc-macros
support renaming the `proc_macro` crate, so we can't simply hardcode
this path. Previously, the `quote_span` method used the path
`crate::Span` - however, this only works when it is called by the
builtin `quote!` macro in the same crate. To support being called from
arbitrary crates, we need access to the name of the `proc_macro` crate
to generate a path. This PR adds an additional argument to `quote_span`
to specify the name of the `proc_macro` crate. Howver, this feels kind
of hacky, and we may want to change this before stabilizing anything
quote-related.
Additionally, using `quote_span` currently requires enabling the
`proc_macro_internals` feature. The builtin `quote!` macro
has an `#[allow_internal_unstable]` attribute, but this won't work for
custom quote implementations. This will likely require some additional
tricks to apply `allow_internal_unstable` to the span of
`proc_macro::Span::recover_proc_macro_span`.
The whole point of named fields is that we don't have to worry about
order. The names, not the position, communicate the information, so
worrying about consistency for consistency's sake is pedantic to a *T*.
Fixes#7192.
wchargin-branch: inconsistent-struct-constructor-pedantic
wchargin-source: 4fe078a21c77ceb625e58fa3b90b613fc4fa6a76
Fix needless_quesiton_mark false positive
changelog: Fix [`needless_question_mark`] false positive where the inner value is implicity dereferenced by the question mark.
Fixes#7107
Handle write!(buf, "\n") case better
Make `write!(buf, "\n")` suggest `writeln!(buf)` by removing
the trailing comma from `writeln!(buf, )`.
changelog: [`write_with_newline`] suggestion on only "\n" improved
Make `write!(buf, "\n")` suggest `writeln!(buf)` by removing
the trailing comma from `writeln!(buf, )`.
changelog: [`write_with_newline`] suggestion on only "\n" improved
It relaxes rules for `to_*` variant, so it doesn't lint in trait definitions
and implementations anymore.
Although, non-`Copy` type implementing trait's `to_*` method taking
`self` feels not good (consumes ownership, so should be rather named `into_`), it would be better if this case was a pedantic lint (allow-by-default) instead.
Refactor: arrange lints in misc_early module
This PR arranges misc_early lints so that they can be accessed more easily.
Basically, I refactored them following the instruction described in #6680.
cc: `@Y-Nak,` `@flip1995,` `@magurotuna`
changelog: Move lints in misc_early module into their own modules.
Fix stack overflow issue in `redundant_pattern_matching`
Fixes#7169
~~cc `@Jarcho` Since tomorrow is release day and we need to get this also fixed in beta, I'll just revert the PR instead of looking into the root issue. Your changes are good, so if you have an idea what could cause this stack overflow and know how to fix it, please open a PR that reverts this revert with a fix.~~
r? `@llogiq`
changelog: none (fixes stack overflow, but this was introduced in this release cycle)
needless_collect: Lint cases with type annotations for indirect usage and recognize `BinaryHeap`
fixes#7110
changelog: needless_collect: Lint cases with type annotations for indirect usage and recognize `BinaryHeap`.
Producing a good suggestion for this lint is already hard when no macros
are involved. With macros the lint message and the suggestion are just
confusing. Since both, producing a good suggestion and figuring out if
this pattern can be re-written inside a macro is nearly impossible, just
bail out.
[single_char_pattern] add strip_prefix and strip_suffix
Title says it all. Adjusted ui tests.
I added the second commit in case you don't like that I moved that table into `single_char_pattern.rs` directly. I don't see any reason why it shouldn't be in that file. It isn't used anywhere else.
*Please write a short comment explaining your change (or "none" for internal only changes)*
changelog: add strip_prefix and strip_suffix to single_char_pattern lint
while_immutable_cond: check condition for mutation
This fixes#6689 by also checking the bindings mutated in the condition, whereas it was previously only checked in the loop body.
---
changelog: Fix FP in [`while_immutable_cond`] where mutation in the loop variable wasn't picked up.
`implicit_return` improvements
fixes: #6940
changelog: Fix `implicit_return` suggestion for async functions
changelog: Improve `implicit_return` suggestions when returning the result of a macro
changelog: Check for `break` expressions inside a loop which are then implicitly returned
changelog: Allow all diverging functions in `implicit_return`, not just panic functions
Remove leftover plugin conf_file code
changelog: none
Removes dead code that used to support the following syntax:
```rust
#![plugin(clippy(conf_file="path/to/clippy's/configuration"))]
```
RLS (and others?) will need to remove the `&[]` from `clippy_lints::read_conf(&[], sess)`.
r? `@flip1995`
Don't rebuild rustdoc and clippy after checking bootstrap
This works by unconditionally passing -Z unstable-options to the
compiler. This has no affect in practice since bootstrap doesn't use
`deny(rustc::internal)`.
Fixes https://github.com/rust-lang/rust/issues/82461.
r? ```@Mark-Simulacrum```
thread 'rustc' panicked at 'index out of bounds: the len is 0 but the index is 0', src/tools/clippy/clippy_lints/src/matches.rs:1595:53
note: run with `RUST_BACKTRACE=1` environment variable to display a backtrace
I don't have a minimised testcase because I don't have time to reduce libstd down to a few lines right now.
Fix FN in `iter_cloned_collect` with a large array
fixes#6808
changelog: Fix FN in `iter_cloned_collect` with a large array
I spotted that [is_iterable_array](a362a4d1d0/clippy_lints/src/loops/explicit_iter_loop.rs (L67-L75)) function that `explicit_iter_loop` lint is using only works for array sizes <= 32.
There is this comment:
> IntoIterator is currently only implemented for array sizes <= 32 in rustc
I'm a bit confused, because I read that [IntoIterator for arrays](https://doc.rust-lang.org/src/core/array/mod.rs.html#194-201) with const generic `N` is stable since = "1.0.0". Although Const Generics MVP were stabilized in Rust 1.51.
Should I set MSRV for the current change? I will try to test with older compilers soon.
manual_unwrap_or: fix invalid code suggestion, due to macro expansion
fixes#6965
changelog: fix invalid code suggestion in `manual_unwrap_or` lint, due to macro expansion
extend `single_element_loop` to match `.iter()`
This extends `single_element_loop` to also match `[..].iter()` in the loop argument. Related to #7125, but not completely fixing it due to the lint only firing if the array expression contains a local variable.
---
changelog: none
`single_component_path_imports`: ignore `pub(crate) use some_macro;`
Fixes#7106
*Please write a short comment explaining your change (or "none" for internal only changes)*
changelog: Ignore exporting a macro within a crate using `pub(crate) use some_macro;` for [`single_component_path_imports`]
Unused io amount detects `.read().ok()?`
fixes#7096
changelog: unused_io_amount now detect expertion like `.read().ok()?`, `.read().or_else(|err| ...)?` and similar expressions.
Better suggestions when returning macro calls.
Suggest changeing all the break expressions in a loop, not just the final statement.
Don't lint divergent functions.
Don't suggest returning the result of any divergent fuction.
Switch transmute_ptr_to_ptr to "pedantic" class.
Per discussion in https://github.com/rust-lang/rust-clippy/issues/6372, this lint has significant false positives.
changelog: transmute_ptr_to_ptr defaults to "allow".
Add lint to check for boolean comparison in assert macro calls
This PR adds a lint to check if an assert macro is using a boolean as "comparison value". For example:
```rust
assert_eq!("a".is_empty(), false);
```
Could be rewritten as:
```rust
assert!(!"a".is_empty());
```
PS: The dev guidelines are amazing. Thanks a lot for writing them!
changelog: Add `bool_assert_comparison` lint
useless use of format! should return function directly
fixes#7066
changelog: [`useless_format`] wraps the content in the braces when it's needed.
r? `@giraffate`
Allow allman style braces in `suspicious_else_formatting`
fixes: #3864
Indentation checks could be added as well, but the lint already doesn't check for it.
changelog: Allow allman style braces in `suspicious_else_formatting`
Fixing FPs for the `branches_sharing_code` lint
Fixes#7053Fixes#7054
And an additional CSS adjustment to support dark mode for every inline code. It currently only works in paragraphs, which was an oversight on my part 😅. [Current Example](https://rust-lang.github.io/rust-clippy/master/index.html#blacklisted_name)
This also includes ~50 lines of doc comments and is therefor not as big as the changes would indicate. 🐧
---
changelog: none
All of these bugs were introduced in this dev version and are therefor not worth a change log entry.
r? `@phansch`
cc: `@camsteffen` since you have a pretty good overview of the `SpanlessEq` implementation 🙃
Add `cloned_instead_of_copied` lint
Don't go cloning all willy-nilly.
Featuring a new `get_iterator_item_ty` util!
changelog: Add cloned_instead_of_copied lint
Closes#3870
Fix: redundant_pattern_matching drop order
Fixes#5746
A note about the change in drop order is added when the scrutinee (or any temporary in the expression) isn't known to be safe to drop in any order (i.e. doesn't implement the `Drop` trait, or contain such a type). There is a whitelist for some `std` types, but it's incomplete. Currently just `Vec<_>`, `Box<_>`, `Rc<_>` and `Arc<_>`, but only if the contained type is also safe to drop in any order.
Another lint for when the drop order changes could be added as allowed by default, but the drop order requirement is pretty subtle in this case. I think the note added to the lint should be enough to make someone think before applying the change.
changelog: Added a note to `redundant_pattern_matching` when the change in drop order might matter
Improve `map_entry` suggestion
fixes: #5176fixes: #4674fixes: #4664fixes: #1450
Still need to handle the value returned by `insert` correctly.
changelog: Improve `map_entry` suggestion. Will now suggest `or_insert`, `insert_with` or `match _.entry(_)` as appopriate.
changelog: Fix `map_entry` false positives where the entry api can't be used. e.g. when the map is used for multiple things.
Don't allow adjustments for `manual_map`
fixes: #7077
The other option here would be to add the return type to the closure. It would be fine for simple types, but longer types can be rather unwieldy. Could also implement the adjustment manually.
changelog: Don't lint `manual_map` when type adjustments are added. e.g. autoderef
Remove `match_path` and `match_qpath`
The only remaining usage is the `author` lint, so the functions are left in for now. The test result for `repl_uninit` changed, the lint was broken before.
The `collapsible_span_lint_calls` and `match_type_on_diag_item` tests have been changed. Both lints were broken when utils was extracted into it's own crate. `match_type_on_diag_item` isn't quite fixed, but it's at least less broken.
changelog: None
Fix false positives where the map is used before inserting into the map.
Fix false positives where two insertions happen.
Suggest using `if let Entry::Vacant(e) = _.entry(_)` when `or_insert` might be a semantic change
tabs_in_doc_comments: Fix ICE due to char indexing
This is a quick-fix for an ICE in `tabs_in_doc_comments`. The problem
was that we we're indexing into possibly multi-byte characters, such as '位'.
More specifically `get_chunks_of_tabs` was returning indices into
multi-byte characters. Those were passed on to a `Span` creation that
then caused the ICE.
This fix makes sure that we don't return indices that point inside a
multi-byte character. *However*, we are still iterating over unicode
codepoints, not grapheme clusters. So a seemingly single character like y̆ ,
which actually consists of two codepoints, will probably still cause
incorrect spans in the output. But I don't think we handle those cases
anywhere in Clippy currently?
Fixes#5835
changelog: Fix ICE in `tabs_in_doc_comments`
Fix a FP in `missing_const_for_fn`
where a function that calls a standard library function whose constness
is unstable is considered as being able to be a const function. Fixes#5995.
The core change is the move from `rustc_mir::const_eval::is_min_const_fn` to `rustc_mir::const_eval::is_const_fn`. I'm not clear about the difference in their purpose between them so I'm not sure if it's acceptable to call `qualify_min_const_fn::is_min_const_fn` this way now.
---
changelog: `missing_const_for_fn`: No longer lints when an unstably const function is called
Fix FP in `wrong_self_convention` lint
Previously, this lint didn't check into impl block when it was implementing a trait.
Recent improvements (#6924) have moved this check and some impl blocks are now checked but they shouldn't, such as in #7032.
Fixes#7032
changelog: Fix FP when not taking `self` in impl block for `wrong_self_convention` lint
Add a note on the issue #5953
Hello,
I thought it would be better to have a note and warning about this issue considering it introduced an UB in the past even with the "Search on Github" feature.
---
changelog: Add a note on the issue #5953 to the known problems section.
Deprecate `filter_map`
Since #6591, `filter_map` does not even lint `filter().map()`. The cases that are still linted make no sense IMO. So this just removes/deprecates it.
changelog: Deprecate `filter_map` lint
Closes#3424Fixes#7050
Fix FP in `single_component_path_imports` lint
Fix FP in `single_component_path_imports` lint when the import is reused with `self`, like in `use self::module`.
Fixes#5210
changelog: none
Invalid null usage v2
This is continuation of #6192 after inactivity.
I plan to move paths into the compiler as diagnostic items after this is merged.
fixes#1703
changelog: none
consider mutability on useless_vec suggestions
fixes#7035
changelog: Now the suggested by `useless_vec` considers mutability to suggest either `&[]`, as before, or `&mut []` if the used reference is mutable.
This is a quick-fix for an ICE in `tabs_in_doc_comments`. The problem
was that we we're indexing into possibly multi-byte characters, such as '位'.
More specifically `get_chunks_of_tabs` was returning indices into
multi-byte characters. Those were passed on to a `Span` creation that
then caused the ICE.
This fix makes sure that we don't return indices that point inside a
multi-byte character. *However*, we are still iterating over unicode
codepoints, not grapheme clusters. So a seemingly single character like y̆ ,
which actually consists of two codepoints, will probably still cause
incorrect spans in the output.
Don't trigger `same_item_push` if the vec is used in the loop body
fixes#6987
changelog: `same_item_push`: Don't trigger if the `vec` is used in the loop body
fix `missing_panics_doc` not detecting `assert_eq!` and `assert_ne!`
fixes#6997
changelog: `missing_panics_doc` detects `assert_eq!` and `assert_ne!`
---
searching for `assert_eq!` and `assert_ne!` in `FindPanicUnwrap`
New Lint: `branches_sharing_code`
This lint checks if all `if`-blocks contain some statements that are the same and can be moved out of the blocks to prevent code duplication. Here is an example:
```rust
let _ = if ... {
println!("Start"); // <-- Lint for code duplication
let _a = 99;
println!("End"); // <-- Lint for code duplication
false
} else {
println!("Start");
let _b = 17;
println!("End");
false
};
```
This could be written as:
```rust
println!("Start");
let _ = if ... {
let _a = 99;
false
} else {
let _b = 17;
false
};
println!("End");
```
---
This lint will get masked by the `IF_SAME_THEN_ELSE` lint. I think it makes more sense to only emit one lint per if block. This means that the folloing example:
```rust
if ... {
let _a = 17;
} else {
let _a = 17;
}
```
Will only trigger the `IF_SAME_THEN_ELSE` lint and not the `SHARED_CODE_IN_IF_BLOCKS` lint.
---
closes: #5234
changelog: Added a new lint: `branches_sharing_code`
And hello to the one that is writing the changelog for this release :D
Remove author requirement for `cargo_common_metadata`
This PR follows https://github.com/rust-lang/cargo/pull/9282, I'm not fully informed about all of this, it would be great if somebody knowledgeable about this topic agrees.
changelog: Changed `cargo_common_metadata` to stop linting on the optional author field.
* Added expression check for shared_code_in_if_blocks
* Finishing touches for the shared_code_in_if_blocks lint
* Applying PR suggestions
* Update lints yay
* Moved test into subfolder
Fix `redundant_clone` fp
fixes: #5973fixes: #5595fixes: #6998
changelog: Fix `redundant_clone` fp where the cloned value is modified while the clone is in use.
Lint: filter(Option::is_some).map(Option::unwrap)
Fixes#6061
*Please write a short comment explaining your change (or "none" for internal only changes)*
changelog:
* add new lint for filter(Option::is_some).map(Option::unwrap)
First Rust PR, so I'm sure I've violated some idioms. Happy to change anything.
I'm getting one test failure locally -- a stderr diff for `compile_test`. I'm having a hard time seeing how I could be causing it, so I'm tentatively opening this in the hopes that it's an artifact of my local setup against `rustc`. Hoping it can at least still be reviewed in the meantime.
I'm gathering that since this is a method lint, and `.filter(...).map(...)` is already checked, the means of implementation needs to be a little different, so I didn't exactly follow the setup boilerplate. My way of checking for method calls seems a little too direct (ie, "is the second element of the expression literally the path for `Option::is_some`?"), but it seems like that's how some other lints work, so I went with it. I'm assuming we're not concerned about, eg, closures that just end up equivalent to `Option::is_some` by eta reduction.
disable upper_case_acronyms for pub items - enum edition
Fixes https://github.com/rust-lang/rust-clippy/issues/6803 (again... 😅 )
My previous fix did not work for enums because enum variants were checked separately in the `check_variant` function but it looks like we can't use that because we can't tell if the enum the variants belong to is declared as public or not (it always said `Inherited` for me)
I went and special-cased enums and iterated over all the variants "manually", but only, if the enums is not public.
---
changelog: fix upper_case_acronyms still firing on public enums (#6803)
Refactor types
r? `@flip1995`
This is the last PR to close#6724🎉
Also, this fixes#6936.
changelog: `vec_box`: Fix FN in `const` or `static`
changelog: `linkedlist`: Fix FN in `const` or `static`
changelog: `option_option`: Fix FN in `const` or `static`
Improve `clone_on_copy`
This also removes the `clone_on_copy_mut` test as the same thing is covered in the `clone_on_copy` test.
changelog: `copy_on_clone` lint on chained method calls taking self by value
changelog: `copy_on_clone` only lint when using the `Clone` trait
changelog: `copy_on_clone` correct suggestion when the cloned value is a macro call.
Lint on `_.clone().method()` when method takes self by value
Set applicability correctly
Correct suggestion when the cloned value is a macro call. e.g. `m!(x).clone()`
Don't lint when not using the `Clone` trait
Improve `expl_impl_clone_on_copy`
fixes: #1254
changelog: Check to see if the generic constraints are the same as if using derive for `expl_impl_clone_on_copy`
Found with https://github.com/est31/warnalyzer.
Dubious changes:
- Is anyone else using rustc_apfloat? I feel weird completely deleting
x87 support.
- Maybe some of the dead code in rustc_data_structures, in case someone
wants to use it in the future?
- Don't change rustc_serialize
I plan to scrap most of the json module in the near future (see
https://github.com/rust-lang/compiler-team/issues/418) and fixing the
tests needed more work than I expected.
TODO: check if any of the comments on the deleted code should be kept.
`len_without_is_empty` improvements
fixes: #6958fixes: #6972
changelog: Check the return type of `len`. Only integral types, or an `Option` or `Result` wrapping one.
changelog: Ensure the return type of `is_empty` matches. e.g. `Option<usize>` -> `Option<bool>`
Check the return type of `len`. Only integral types, or an `Option` or `Result` wrapping one.
Ensure the return type of `is_empty` matches. e.g. `Option<usize>` -> `Option<bool>`
Fix bad suggestion when a reborrow might be required
Fix bad suggestion when the value being sliced is a macro call
Don't lint inside of a macro due to the previous context sensitive changes
Ignore str::len() in or_fun_call lint.
changelog: Changed `or_fun_call` to ignore `str::len`, in the same way it ignores `slice::len` and `array::len`
Closes#6943
Refactor lints in methods module
This PR refactors methods lints other than the lints I refactored in https://github.com/rust-lang/rust-clippy/pull/6826 and moves some functions to methods/utils.rs.
Basically, I follow the instruction described in #6680.
**For ease of review, I refactored step by step, keeping each commit small.**
closes https://github.com/rust-lang/rust-clippy/issues/6886
cc: `@phansch,` `@flip1995,` `@Y-Nak`
changelog: Move lints in methods module to their own modules and some function to methods/utils.rs.
search_is_some: add checking for `is_none()`
fixes: #6815
changelog: search_is_some: add checking for `is_none()`.
To be honest I don't know what is the process of renaming the lints. Appreciate any feedback if that needs to be handled differently. Thanks!
Fix bad suggestion for `match_single_binding` lint
Fix a bad suggestion that needs curly braces when the target `match` is the body of an arm.
Fixes#6572
changelog: none
`match_wildcard` improvements
fixes: #6604fixes: #5733fixes: #6862#5733 is only fixed in the normal case, if different paths are used for the variants then the same problem will occur. It's cause by `def_path_str` returning an utterly useless result. I haven't dug into why yet.
For #6604 there should be some discussion before accepting this. It's easy enough to change the message rather than disable the lint for `Option` and `Result`.
changelog: Attempt to find a common path prefix for `match_wildcard_for_single_variants` and `wildcard_enum_match_arm`
changelog: Don't lint op `Option` and `Result` for `match_wildcard_for_single_variants` and `wildcard_enum_match_arm`
changelog: Consider `or` patterns and `Self` prefix for `match_wildcard_for_single_variants` and `wildcard_enum_match_arm`
Deprecate `intrinsics::drop_in_place` and `collections::Bound`, which accidentally weren't deprecated
Fixes#82080.
I've taken the liberty of updating the `since` values to 1.52, since an unobservable deprecation isn't much of a deprecation (even the detailed release notes never bothered to mention these deprecations).
As mentioned in the issue I'm *pretty* sure that using a type alias for `Bound` is semantically equivalent to the re-export; [the reference implies](https://doc.rust-lang.org/reference/items/type-aliases.html) that type aliases only observably differ from types when used on unit structs or tuple structs, whereas `Bound` is an enum.
ast/hir: Rename field-related structures
I always forget what `ast::Field` and `ast::StructField` mean despite working with AST for long time, so this PR changes the naming to less confusing and more consistent.
- `StructField` -> `FieldDef` ("field definition")
- `Field` -> `ExprField` ("expression field", not "field expression")
- `FieldPat` -> `PatField` ("pattern field", not "field pattern")
Various visiting and other methods working with the fields are renamed correspondingly too.
The second commit reduces the size of `ExprKind` by boxing fields of `ExprKind::Struct` in preparation for https://github.com/rust-lang/rust/pull/80080.
Don't lint on `Result` and `Option` types.
Considers `or` patterns.
Considers variants prefixed with `Self`
Suggestions will try to find a common prefix rather than just using the full path
Write literal suggestion
fixes: #6768
changelog: Add suggestion to `write_literal` and `print_literal` lints
changelog: Change `use_debug` to point only at the format string
StructField -> FieldDef ("field definition")
Field -> ExprField ("expression field", not "field expression")
FieldPat -> PatField ("pattern field", not "field pattern")
Also rename visiting and other methods working on them.
wrong_self_convention: fix lint in case of `to_*_mut` method
fixes#6758
changelog: wrong_self_convention: fix lint in case of `to_*_mut` method. When a method starts with `to_` and ends with `_mut`, clippy expects a `&mut self` parameter, otherwise `&self`.
Any feedback is welcome. I was also thinking if shouldn't we treat `to_` the same way as `as_`. Namely to accept `self` taken: `&self` or `&mut self`.
replace span_lint with span_lint_and_sugg along with error message
fixes: #6874
changelog: none
apologies if this may not be the most idiomatic way of doing it, any advice on changes (if any) would be greatly appreciated.
mem_replace_with_default: recognize some std library ctors
fixes#6562
changelog: mem_replace_with_default: recognize some common constructors equivalent to `Default::default()`
Fix suggestion for `explicit_deref_methods`. Sometimes `&**` is needed, sometimes nothing is needed.
Allow `explicit_deref_methods` to trigger in a few new contexts.
`explicit_deref_methods` will now consider ufcs calls
inconsistent_struct_constructor: try to make message and lint description a bit clearer
changelog: inconsistent_struct_constructor: try to make message and lint description a bit clearer
r? `@ghost`
Fix false positives on procedural macros of `missing_inline_in_public_items` lint
Fixes#6486.
changelog: Fix false positives on procedural macros of `missing_inline_in_public_items` lint.
Improve needless_borrowed_ref docs
changelog: none
I think "borrowed ref" is a confusing description for this lint. Destructuring a reference is the opposite of borrowing. So I updated the wording throughout the docs. Unfortunately this nit applies to the name of the lint itself, but I won't bother changing that. One motivation for these changes is to clarify the difference between this lint and `needless_borrow` (they are actually quite different). Let me know if I need to clarify anything or if you disagree with any changes.
Refactor casts lint
Ref: #6724
Changes:
1. Separate the `casts` group from the `types` group.
2. Reorganize the lints of the `casts` group into their own modules.
Notes:
1. I didn't `fix` #6874 in order to maintain this PR as small as possible.
---
changelog: none
or-patterns: disallow in `let` bindings
~~Blocked on https://github.com/rust-lang/rust/pull/81869~~
Disallows top-level or-patterns before type ascription. We want to reserve this syntactic space for possible future generalized type ascription.
r? ``@petrochenkov``
Opt-in to rustc_private for `rust-analyzer`
rust-analyzer/rust-analyzer#7891
changelog: none
This will also help priroda and any other package which depends on the `miri` library crate.
This gets rid of the following paths:
* OS_STRING
* TO_OWNED
* TO_STRING
Also removes some usages of:
* PATH_BUF
And the now completely unused `clippy_lints::types::is_ty_param_path`
Fix `manual_map` false positives
fixes: #6795fixes: #6797fixes: #6811fixes: #6819
changelog: Fix false positives for `manual_map` when `return`, `break`, `continue`, `yield`, `await`, and partially moved values are used.
changelog: Don't expand macros in suggestions for `manual_map`
Fix false positive for unit_arg lint
Fixes#6447
To avoid false positives don't complain about unit args when they come from a path expression, e.g. a local variable.
**Note:** This is my first contribution to Clippy, so I might have messed up somewhere. Any feedback is welcome and I'm happy to work out any kinks.
---
changelog: Do not lint unit arguments when they come from a path expression.
or_fun_call: fix suggestion for `or_insert(vec![])`
fixes#6748
changelog: or_fun_call: fix suggestion for `or_insert(vec![])` on `std::collections::hash_map::Entry` or `std::collections::btree_map::Entry`
Applies for `std::collections::hash_map::Entry` and `std::collections::btree_map::Entry`
Example:
Previously, for the following code:
`let _ = hash_map.entry("test".to_owned()).or_insert(vec![]);`
clippy would suggest to use:
`or_insert_with(vec![])`, which causes a compiler error (E0277).
Now clippy suggests:
`or_insert_with(Vec::new)`
move upper_case_acronyms back to style, but make the default behaviour less aggressive by default (can be unleashed via config option)
Previous discussion in the bi-weekly clippy meeting for reference: https://rust-lang.zulipchat.com/#narrow/stream/257328-clippy/topic/Meeting.202021-02-23/near/227458019
Move the `upper_case_acronyms` lint back to the style group.
Only warn on fully-capitalized names by default.
Add add a clippy-config option `upper-case-acronyms-aggressive: true/false` to enabled more aggressive linting on
all substrings that could be capitalized acronyms.
---
changelog: reenable upper_case_acronyms by default but make the more aggressive linting opt-in via config option
Moves the lint back from pedantic to style group.
The lint default now only warns on names that are completely capitalized, like "WORD"
and only if the name is longer than 2 chars (so that names where each of the letter represents a word are still distinguishable).
For example: FP (false positive) would still be "valid" and not warned about (but EOF would warn).
A "upper_case_acronyms_aggressive: true/false" config option was added that restores the original lint behaviour to warn
on any kind of camel case name that had more than one capital letter following another capital letter.
The lint does point out inconsistency with the Rust naming convention,
but the fact that rustc does not warn about the inconsistency by default
means that clippy probably should not warn by default either.
changelog: move upper_case_acronyms lint from style to pedantic group.
Inconsistent struct constructor
fixes: #6352
r? `@matthiaskrgr`
I added the lint that checks for the struct constructors where the order of the field init shorthands is inconsistent with that in the struct definition.
changelog: Add style lint: `inconsistent_struct_constructor`
Fix FP in inherent_to_string when the function has generic parameters
Minimal example of the false positive:
````
struct G;
impl G {
fn to_string<const _N: usize>(&self) -> String {
"G.to_string()".to_string()
}
}
fn main() {
let g = G;
g.to_string::<1>();
}
````
Clippy emits an `inherent_to_string` warning, and suggests that we implement `Display` for `G` instead. However, this is not possible, since the generic parameter _N only exists in this function, not in `G` itself. This particular example uses const generics, which is where the issue is most likely to come up, but this PR skips the lint if the `to_string` function has any kind of generic parameters.
changelog: Fix FP in `inherent_to_string`
Change unnecessary_wraps to pedantic
changelog: Change unnecessary_wraps to pedantic
There seems to be enough evidence that this lint is not wanted as warn-by-default. Attempted before at #6380. False positives at #6721 and #6427. Actually requested to change the category at #6726.
Closes#6726
Teach SpanlessEq binding IDs
changelog: Fix collapsible_match false positive
Fixes#6740
This PR changes the way `SpanlessEq` determines whether two local variables are the same. Instead of checking that the names match, it checks that the `HirId`s match. If local bindings are declared within the expressions that are being compared, `SpanlessEq` will remember bindings that correspond to each other in a `FxHashMap<HirId, HirId>`. This makes `SpanlessEq` more flexible while also fixing false positives.
Example: `{ let x = 1; x + 2 }` is equal to `{ let y = 1; y + 2 }`.
CC `@xFrednet` I think this will resolve some concerns in #6463
Add the from_str_radix_10 lint
changelog: added the new `from_str_radix_10` which sometimes replaces calls to `primitive::from_str_radix` to `str::parse`
This is ready to be merged, although maybe the category should be `pedantic` instead of `style`? I'm not sure where it fits better.
Closes#6713.
ast: Keep expansion status for out-of-line module items
I.e. whether a module `mod foo;` is already loaded from a file or not.
This is a pre-requisite to correctly treating inner attributes on such modules (https://github.com/rust-lang/rust/issues/81661).
With this change AST structures for `mod` items diverge even more for AST structure for the crate root, which previously used `ast::Mod`.
Therefore this PR removes `ast::Mod` from `ast::Crate` in the first commit, these two things are sufficiently different from each other, at least at syntactic level.
Customization points for visiting a "`mod` item or crate root" were also removed from AST visitors (`fn visit_mod`).
`ast::Mod` itself was refactored away in the second commit in favor of `ItemKind::Mod(Unsafe, ModKind)`.
Fix for issue 6640
*Please write a short comment explaining your change (or "none" for internal only changes)*
changelog: unnecessary_wraps will now suggest to remove unnecessary wrapped return unit type, like Option<()>
fixes#6640
Replace if-let and while-let with `if let` and `while let`
This pull request replaces if-let and while-let with `if let` and `while let`.
closes https://github.com/rust-lang/rust/issues/82205
New lint: default_numeric_fallback
fixes#6064
r? `@flip1995`
As we discussed in [here](https://rust-lang.zulipchat.com/#narrow/stream/257328-clippy/topic/Issue.20.236064/near/224647188) and [here](https://rust-lang.zulipchat.com/#narrow/stream/257328-clippy/topic/Issue.20clippy.236064/near/224746333), I start implementing this lint from the strictest version.
In this PR, I'll allow the below two cases to pass the lint to reduce FPs.
1. Appearances of unsuffixed numeric literals in `Local` if `Local` has a type annotation, for example:
```rust
// Good.
let x: i32 = 1;
// Also good.
let x: (i32, i32) = if cond {
(1, 2)
} else {
(2, 3)
};
```
2. Appearances of unsuffixed numeric literals in args of `Call` or `MethodCall` if corresponding arguments of their signature have concrete types, for example:
```rust
fn foo_mono(x: i32) -> i32 {
x
}
fn foo_poly<T>(t: T) -> t {
t
}
// Good.
let x = foo_mono(13);
// Still bad.
let x: i32 = foo_poly(13);
```
changelog: Added restriction lint: `default_numeric_fallback`
Do not lint when the closure is called using an iterator
Fix FP when the closure is used in an iterator for `blocks_in_if_conditions` lint
FIxes: #1141
changelog: none
Rework use_self impl based on ty::Ty comparison #3410 | Take 2
This builds on top of #5531
I already reviewed and approved the commits by `@montrivo.` So only the review of my commits should be necessary.
I would also appreciate your review `@montrivo,` since you are familiar with the challenges here.
Fixes#3410 and Fixes#4143 (same problem)
Fixes#2843Fixes#3859Fixes#4734 and fixes#6221Fixes#4305Fixes#5078 (even at expression level now 🎉)
Fixes#3881 and Fixes#4887 (same problem)
Fixes#3909
Not yet: #4140 (test added)
All the credit for the fixes goes to `@montrivo.` I only refactored and copy and pasted his code.
changelog: rewrite [`use_self`] lint and fix multiple (8) FPs. One to go.
Fix suggestions that need parens in `from_iter_instead_of_collect` lint
Fixes broken suggestions that need parens (i.e.: range)
Fixes: #6648
changelog: none
This renames the variants in HIR UnOp from
enum UnOp {
UnDeref,
UnNot,
UnNeg,
}
to
enum UnOp {
Deref,
Not,
Neg,
}
Motivations:
- This is more consistent with the rest of the code base where most enum
variants don't have a prefix.
- These variants are never used without the `UnOp` prefix so the extra
`Un` prefix doesn't help with readability. E.g. we don't have any
`UnDeref`s in the code, we only have `UnOp::UnDeref`.
- MIR `UnOp` type variants don't have a prefix so this is more
consistent with MIR types.
- "un" prefix reads like "inverse" or "reverse", so as a beginner in
rustc code base when I see "UnDeref" what comes to my mind is
something like "&*" instead of just "*".
disallowed_methods: Support functions in addition to methods
## Context:
Hey all! I have a particular use case where I'd like to ban certain functions in a code base I work on. For example, I want to ban `Instant::now()` (among others) as we have a time service for mocking time in deterministic simulation tests. Obviously, it doesn't make sense to include a lint like this for all clippy users. Imagine my excitement when I spotted the new `disallowed_methods` lint in clippy--perfect! Unfortunately, after playing around with it for a bit, I was frustrated to realize that it didn't support functions like `Instant::now()`, so I've added support for them in this PR.
It might also make sense to rename the lint from `disallowed_methods` -> `disallowed_functions`, though I've held off from including that rename in this change, since I'm unsure of clippy's breaking change policy.
## Change
Support functions in addition to methods. In other words, support:
`disallowed_methods = ["alloc::vec::Vec::new"]` (a function) in addition to
`disallowed_methods = ["alloc::vec::Vec::leak"]` (a method).
Improve the documentation to clarify that users must specify the full qualified path for each disallowed function, which can be confusing for reexports. Include an example `clippy.toml`.
Simplify the actual lint pass so we can reuse `utils::fn_def_id`.
changelog: disallowed_method: Now supports functions in addition to methods
Add new lint `filter_map_identity`
<!--
Thank you for making Clippy better!
We're collecting our changelog from pull request descriptions.
If your PR only includes internal changes, you can just write
`changelog: none`. Otherwise, please write a short comment
explaining your change.
If your PR fixes an issue, you can add "fixes #issue_number" into this
PR description. This way the issue will be automatically closed when
your PR is merged.
If you added a new lint, here's a checklist for things that will be
checked during review or continuous integration.
- \[x] Followed [lint naming conventions][lint_naming]
- \[x] Added passing UI tests (including committed `.stderr` file)
- \[x] `cargo test` passes locally
- \[x] Executed `cargo dev update_lints`
- \[x] Added lint documentation
- \[x] Run `cargo dev fmt`
[lint_naming]: https://rust-lang.github.io/rfcs/0344-conventions-galore.html#lints
Note that you can skip the above if you are just opening a WIP PR in
order to get feedback.
Delete this line and everything above before opening your PR.
-->
This commit adds a new lint named filter_map_identity.
This lint is the same as `flat_map_identity` except that it checks for the usage of `filter_map`.
---
Closes#6643
changelog: Added a new lint: `filter_map_identity`
Adds a new lint that checks if there is a semicolon on the last block statement if it returns nothing
changelog: Added a new lint: `SEMICOLON_IF_NOTHING_RETURNED`
fixes#6467
Adds the `SEMICOLON_IF_NOTHING_RETURNED` lint and therefore closes#6467.
Cleanup path-to-local checks
changelog: none
It seemed like too much ceremony going on to check if an expression matches a variable. So I created two util functions `path_to_local(Expr) -> Option<HirId>` and `path_to_local_id(Expr, HirId) -> bool` to make this easier, and used them wherever applicable.
I changed logic in a few places to use `HirId` instead of `Symbol` where it was easy to do so. I believe this is more correct and may even fix some bugs.
I also removed some calls to `qpath_res`. This is not needed if you are only looking for a `Res::Local`.
As a note, I wanted to name the util functions in a way that encourages understanding of the HIR.
Refactor `PrimitiveTypeTable` for Clippy
I removed `PrimitiveTypeTable` and added `PrimTy::ALL` and `PrimTy::from_name` in its place. This allows Clippy to use `PrimTy::from_name` for the `builtin_type_shadow` lint, and a `const` list of primitive types is deleted from Clippy code (the goal). All changes should be a little faster, if anything.
This commit adds a new lint named `filter_map_identity`. This lint is
the same as `flat_map_identity` except that it checks for `filter_map`.
Closes#6643
In other words, support:
`disallowed_methods = ["alloc::vec::Vec::new"]` (a free function) in
addition to
`disallowed_methods = ["alloc::vec::Vec::leak"]` (a method).
Improve the documentation to clarify that users must specify the full
qualified path for each disallowed function, which can be confusing for
reexports. Include an example `clippy.toml`.
Simplify the actual lint pass so we can reuse `utils::fn_def_id`.
New Lint: Manual Flatten
This is a draft PR for [Issue 6564](https://github.com/rust-lang/rust-clippy/issues/6564).
r? `@camsteffen`
- \[x] Followed [lint naming conventions][lint_naming]
- \[x] Added passing UI tests (including committed `.stderr` file)
- \[x] `cargo test` passes locally
- \[x] Executed `cargo dev update_lints`
- \[x] Added lint documentation
- \[x] Run `cargo dev fmt`
---
*Please write a short comment explaining your change (or "none" for internal only changes)*
changelog: Add new lint [`manual_flatten`] to check for loops over a single `if let` expression with `Result` or `Option`.
Fix let_and_return false positive
The issue:
See this Rust playground link: https://play.rust-lang.org/?edition=2018&gist=12cb5d1e7527f8c37743b87fc4a53748
Run the above with clippy to see the following warning:
```
warning: returning the result of a `let` binding from a block
--> src/main.rs:24:5
|
23 | let value = Foo::new(&x).value();
| --------------------------------- unnecessary `let` binding
24 | value
| ^^^^^
|
= note: `#[warn(clippy::let_and_return)]` on by default
= help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#let_and_return
help: return the expression directly
|
23 |
24 | Foo::new(&x).value()
|
```
Implementing the suggested fix, removing the temporary let binding,
yields a compiler error:
```
error[E0597]: `x` does not live long enough
--> src/main.rs:23:14
|
23 | Foo::new(&x).value()
| ---------^^-
| | |
| | borrowed value does not live long enough
| a temporary with access to the borrow is created here ...
24 | }
| -
| |
| `x` dropped here while still borrowed
| ... and the borrow might be used here, when that temporary is dropped and runs the `Drop` code for type `Foo`
|
= note: the temporary is part of an expression at the end of a block;
consider forcing this temporary to be dropped sooner, before the block's local variables are dropped
help: for example, you could save the expression's value in a new local variable `x` and then make `x` be the expression at the end of the block
|
23 | let x = Foo::new(&x).value(); x
| ^^^^^^^ ^^^
```
The fix:
Of course, clippy looks like it should already handle this edge case;
however, it appears `utils::fn_def_id` is not returning a `DefId` for
`Foo::new`. Changing the `qpath_res` lookup to use the child Path
`hir_id` instead of the parent Call `hir_id` fixes the issue.
changelog: none
