# Objective
This PR addresses #12222 (Fixes#12222). Simple addition to add a 2D
axes gizmo.
## Solution
- Add a new method axes_2d which takes a transform and a case length and
then draws two arrows in the XY plane.
The only thing I'm not sure about here is taking a 3D transform as an
argument. It says in the transform comments that for 2D the z-axis is
used for ordering, so I figured I'd keep it that way?
---
## Changelog
- Add method axes_2d.
- Update arrow_2d to also calculate the tip length depending on arrow
length as in arrow.
- Add axes_2d to examples 2d_gizmos.
---------
Co-authored-by: Ben Lambert <bennett-spencer.lambert@pierer-innovation.com>
# Objective
- Fixes#10909
- Fixes#8492
## Solution
- Name all matrices `x_from_y`, for example `world_from_view`.
## Testing
- I've tested most of the 3D examples. The `lighting` example
particularly should hit a lot of the changes and appears to run fine.
---
## Changelog
- Renamed matrices across the engine to follow a `y_from_x` naming,
making the space conversion more obvious.
## Migration Guide
- `Frustum`'s `from_view_projection`, `from_view_projection_custom_far`
and `from_view_projection_no_far` were renamed to
`from_clip_from_world`, `from_clip_from_world_custom_far` and
`from_clip_from_world_no_far`.
- `ComputedCameraValues::projection_matrix` was renamed to
`clip_from_view`.
- `CameraProjection::get_projection_matrix` was renamed to
`get_clip_from_view` (this affects implementations on `Projection`,
`PerspectiveProjection` and `OrthographicProjection`).
- `ViewRangefinder3d::from_view_matrix` was renamed to
`from_world_from_view`.
- `PreviousViewData`'s members were renamed to `view_from_world` and
`clip_from_world`.
- `ExtractedView`'s `projection`, `transform` and `view_projection` were
renamed to `clip_from_view`, `world_from_view` and `clip_from_world`.
- `ViewUniform`'s `view_proj`, `unjittered_view_proj`,
`inverse_view_proj`, `view`, `inverse_view`, `projection` and
`inverse_projection` were renamed to `clip_from_world`,
`unjittered_clip_from_world`, `world_from_clip`, `world_from_view`,
`view_from_world`, `clip_from_view` and `view_from_clip`.
- `GpuDirectionalCascade::view_projection` was renamed to
`clip_from_world`.
- `MeshTransforms`' `transform` and `previous_transform` were renamed to
`world_from_local` and `previous_world_from_local`.
- `MeshUniform`'s `transform`, `previous_transform`,
`inverse_transpose_model_a` and `inverse_transpose_model_b` were renamed
to `world_from_local`, `previous_world_from_local`,
`local_from_world_transpose_a` and `local_from_world_transpose_b` (the
`Mesh` type in WGSL mirrors this, however `transform` and
`previous_transform` were named `model` and `previous_model`).
- `Mesh2dTransforms::transform` was renamed to `world_from_local`.
- `Mesh2dUniform`'s `transform`, `inverse_transpose_model_a` and
`inverse_transpose_model_b` were renamed to `world_from_local`,
`local_from_world_transpose_a` and `local_from_world_transpose_b` (the
`Mesh2d` type in WGSL mirrors this).
- In WGSL, in `bevy_pbr::mesh_functions`, `get_model_matrix` and
`get_previous_model_matrix` were renamed to `get_world_from_local` and
`get_previous_world_from_local`.
- In WGSL, `bevy_sprite::mesh2d_functions::get_model_matrix` was renamed
to `get_world_from_local`.
# Objective
- Add GizmoBuilders for some primitives as discussed in #13233
## Solution
- `gizmos.primitive_2d(CIRCLE)` and `gizmos.primitive_2d(ELLIPSE)` now
return `Ellipse2dBuilder` aswell.
- `gizmos.primitive_3d(SPHERE)` and `gizmos.sphere()` now return the
same `SphereBuilder`.
- the `.circle_segments` method on the `SphereBuilder` that used to be
returned by `.sphere()` is now called `.segments`
- the sphere primitive gizmo now matches the `gizmos.sphere` gizmo
- `gizmos.primitive_2d(ANNULUS)` now returns a `Annulus2dBuilder`
allowing the configuration of the `segments`
- gizmos cylinders and capsules now have only 1 line per axis, similar
to `gizmos.sphere`
## Migration Guide
- Some `gizmos.primitive_nd` methods now return some or different
builders. You may need to adjust types and match statements
- Replace any calls to `circle_segments()` with `.segments()`
---------
Co-authored-by: Raphael Büttgenbach <62256001+solis-lumine-vorago@users.noreply.github.com>
# Objective
Fixes#13606.
Also Fixes#13614.
## Solution
Added the missing trait impls, and made `gizmos.arc_2d()` work with a
counter-clockwise angle.
## Testing
- Updated the render_primitives example, and it works.
# Objective
Fixes#13427.
## Solution
I changed the traits, and updated all usages.
## Testing
The `render_primitives` example still works perfectly.
---
## Changelog
- Made `gizmos.primitive_2d()` and `gizmos.primitive_3d()` take the
primitives by ref.
## Migration Guide
- Any usages of `gizmos.primitive_2d()` and/or `gizmos.primitive_3d()`
need to be updated to pass the primitive in by reference.
# Objective
- Create a new 2D primitive, Rhombus, also knows as "Diamond Shape"
- Simplify the creation and handling of isometric projections
- Extend Bevy's arsenal of 2D primitives
## Testing
- New unit tests created in bevy_math/ primitives and bev_math/ bounding
- Tested translations, rotations, wireframe, bounding sphere, aabb and
creation parameters
---------
Co-authored-by: Luís Figueiredo <luispcfigueiredo@tecnico.ulisboa.pt>
# Objective
This is just cleanup; we've got some more renderable gizmos and
primitives now that hadn't been added to this example, so let's add
them.
## Solution
In the `render_primitives` example:
- Added `Triangle3d` mesh
- Wrote `primitive_3d` gizmo impl for `Triangle3d` and added the gizmo
- Added `Tetrahedron` mesh and gizmo
I also made the 2d triangle bigger, since it was really small.
## Testing
You can just run the example to see that everything turned out all
right.
## Other
Feel free to let me know if there are other primitives that I missed;
I'm happy to tack them onto this PR.
# Objective
- Fixes#13412
## Solution
- Renamed `segments` in `bevy_gizmos` to `resolution` and adjusted
examples
## Migration Guide
- When working with gizmos, replace all calls to `.segments(...)` with
`.resolution(...)`
This commit makes us stop using the render world ECS for
`BinnedRenderPhase` and `SortedRenderPhase` and instead use resources
with `EntityHashMap`s inside. There are three reasons to do this:
1. We can use `clear()` to clear out the render phase collections
instead of recreating the components from scratch, allowing us to reuse
allocations.
2. This is a prerequisite for retained bins, because components can't be
retained from frame to frame in the render world, but resources can.
3. We want to move away from storing anything in components in the
render world ECS, and this is a step in that direction.
This patch results in a small performance benefit, due to point (1)
above.
## Changelog
### Changed
* The `BinnedRenderPhase` and `SortedRenderPhase` render world
components have been replaced with `ViewBinnedRenderPhases` and
`ViewSortedRenderPhases` resources.
## Migration Guide
* The `BinnedRenderPhase` and `SortedRenderPhase` render world
components have been replaced with `ViewBinnedRenderPhases` and
`ViewSortedRenderPhases` resources. Instead of querying for the
components, look the camera entity up in the
`ViewBinnedRenderPhases`/`ViewSortedRenderPhases` tables.
# Objective
- The volumetric fog PR originally needed to be modified to use
`.view_layouts` but that was changed in another PR. The merge with main
still kept those around.
## Solution
- Remove them because they aren't necessary
This commit implements a more physically-accurate, but slower, form of
fog than the `bevy_pbr::fog` module does. Notably, this *volumetric fog*
allows for light beams from directional lights to shine through,
creating what is known as *light shafts* or *god rays*.
To add volumetric fog to a scene, add `VolumetricFogSettings` to the
camera, and add `VolumetricLight` to directional lights that you wish to
be volumetric. `VolumetricFogSettings` has numerous settings that allow
you to define the accuracy of the simulation, as well as the look of the
fog. Currently, only interaction with directional lights that have
shadow maps is supported. Note that the overhead of the effect scales
directly with the number of directional lights in use, so apply
`VolumetricLight` sparingly for the best results.
The overall algorithm, which is implemented as a postprocessing effect,
is a combination of the techniques described in [Scratchapixel] and
[this blog post]. It uses raymarching in screen space, transformed into
shadow map space for sampling and combined with physically-based
modeling of absorption and scattering. Bevy employs the widely-used
[Henyey-Greenstein phase function] to model asymmetry; this essentially
allows light shafts to fade into and out of existence as the user views
them.
Volumetric rendering is a huge subject, and I deliberately kept the
scope of this commit small. Possible follow-ups include:
1. Raymarching at a lower resolution.
2. A post-processing blur (especially useful when combined with (1)).
3. Supporting point lights and spot lights.
4. Supporting lights with no shadow maps.
5. Supporting irradiance volumes and reflection probes.
6. Voxel components that reuse the volumetric fog code to create voxel
shapes.
7. *Horizon: Zero Dawn*-style clouds.
These are all useful, but out of scope of this patch for now, to keep
things tidy and easy to review.
A new example, `volumetric_fog`, has been added to demonstrate the
effect.
## Changelog
### Added
* A new component, `VolumetricFog`, is available, to allow for a more
physically-accurate, but more resource-intensive, form of fog.
* A new component, `VolumetricLight`, can be placed on directional
lights to make them interact with `VolumetricFog`. Notably, this allows
such lights to emit light shafts/god rays.
[Scratchapixel]:
https://www.scratchapixel.com/lessons/3d-basic-rendering/volume-rendering-for-developers/intro-volume-rendering.html
[this blog post]: https://www.alexandre-pestana.com/volumetric-lights/
[Henyey-Greenstein phase function]:
https://www.pbr-book.org/4ed/Volume_Scattering/Phase_Functions#TheHenyeyndashGreensteinPhaseFunction
# Objective
Remove the limit of `RenderLayer` by using a growable mask using
`SmallVec`.
Changes adopted from @UkoeHB's initial PR here
https://github.com/bevyengine/bevy/pull/12502 that contained additional
changes related to propagating render layers.
Changes
## Solution
The main thing needed to unblock this is removing `RenderLayers` from
our shader code. This primarily affects `DirectionalLight`. We are now
computing a `skip` field on the CPU that is then used to skip the light
in the shader.
## Testing
Checked a variety of examples and did a quick benchmark on `many_cubes`.
There were some existing problems identified during the development of
the original pr (see:
https://discord.com/channels/691052431525675048/1220477928605749340/1221190112939872347).
This PR shouldn't change any existing behavior besides removing the
layer limit (sans the comment in migration about `all` layers no longer
being possible).
---
## Changelog
Removed the limit on `RenderLayers` by using a growable bitset that only
allocates when layers greater than 64 are used.
## Migration Guide
- `RenderLayers::all()` no longer exists. Entities expecting to be
visible on all layers, e.g. lights, should compute the active layers
that are in use.
---------
Co-authored-by: robtfm <50659922+robtfm@users.noreply.github.com>
# Objective
- Implement rounded cuboids and rectangles, suggestion of #9400
## Solution
- Added `Gizmos::rounded_cuboid`, `Gizmos::rounded_rect` and
`Gizmos::rounded_rect_2d`.
- All of these return builders that allow configuring of the corner/edge
radius using `.corner_radius(...)` or `.edge_radius(...)` as well as the
line segments of each arc using `.arc_segments(...)`.
---
## Changelog
- Added a new `rounded_box` module to `bevy_gizmos` containing all of
the above methods and builders.
- Updated the examples `2d_gizmos` and `3d_gizmos`
## Additional information
The 3d example now looks like this:
<img width="1440" alt="Screenshot 2024-02-28 at 01 47 28"
src="https://github.com/bevyengine/bevy/assets/62256001/654e30ca-c091-4f14-a402-90138e95c71b">
And this is the updated 2d example showcasing negative corner radius:
<img width="1440" alt="Screenshot 2024-02-28 at 01 59 37"
src="https://github.com/bevyengine/bevy/assets/62256001/3904697a-5462-4ee7-abd9-3e893ca07082">
<img width="1440" alt="Screenshot 2024-02-28 at 01 59 47"
src="https://github.com/bevyengine/bevy/assets/62256001/a8892cfd-3aad-4c0c-87eb-559c17c8864c">
---------
Co-authored-by: JMS55 <47158642+JMS55@users.noreply.github.com>
Co-authored-by: James Gayfer <10660608+jgayfer@users.noreply.github.com>
# Objective
Sometimes it's nice to iterate over all the coordinate axes using
something like `Vec3::AXES`. This was not available for the
corresponding `Dir` types and now it is.
## Solution
We already have things like `Dir2::X`, `Dir3::Z` and so on, so I just
threw them in an array like the vector types do it. I also slightly
refactored the sphere gizmo code to use `Dir3::AXES` and operate on
directions instead of using `Dir3::new_unchecked`.
## Testing
I looked at the sphere in the `3d_gizmos` example and it seems to work,
so I assume I didn't break anything.
# Objective
- `README.md` is a common file that usually gives an overview of the
folder it is in.
- When on <https://crates.io>, `README.md` is rendered as the main
description.
- Many crates in this repository are lacking `README.md` files, which
makes it more difficult to understand their purpose.
<img width="1552" alt="image"
src="https://github.com/bevyengine/bevy/assets/59022059/78ebf91d-b0c4-4b18-9874-365d6310640f">
- There are also a few inconsistencies with `README.md` files that this
PR and its follow-ups intend to fix.
## Solution
- Create a `README.md` file for all crates that do not have one.
- This file only contains the title of the crate (underscores removed,
proper capitalization, acronyms expanded) and the <https://shields.io>
badges.
- Remove the `readme` field in `Cargo.toml` for `bevy` and
`bevy_reflect`.
- This field is redundant because [Cargo automatically detects
`README.md`
files](https://doc.rust-lang.org/cargo/reference/manifest.html#the-readme-field).
The field is only there if you name it something else, like `INFO.md`.
- Fix capitalization of `bevy_utils`'s `README.md`.
- It was originally `Readme.md`, which is inconsistent with the rest of
the project.
- I created two commits renaming it to `README.md`, because Git appears
to be case-insensitive.
- Expand acronyms in title of `bevy_ptr` and `bevy_utils`.
- In the commit where I created all the new `README.md` files, I
preferred using expanded acronyms in the titles. (E.g. "Bevy Developer
Tools" instead of "Bevy Dev Tools".)
- This commit changes the title of existing `README.md` files to follow
the same scheme.
- I do not feel strongly about this change, please comment if you
disagree and I can revert it.
- Add <https://shields.io> badges to `bevy_time` and `bevy_transform`,
which are the only crates currently lacking them.
---
## Changelog
- Added `README.md` files to all crates missing it.
This commit implements opt-in GPU frustum culling, built on top of the
infrastructure in https://github.com/bevyengine/bevy/pull/12773. To
enable it on a camera, add the `GpuCulling` component to it. To
additionally disable CPU frustum culling, add the `NoCpuCulling`
component. Note that adding `GpuCulling` without `NoCpuCulling`
*currently* does nothing useful. The reason why `GpuCulling` doesn't
automatically imply `NoCpuCulling` is that I intend to follow this patch
up with GPU two-phase occlusion culling, and CPU frustum culling plus
GPU occlusion culling seems like a very commonly-desired mode.
Adding the `GpuCulling` component to a view puts that view into
*indirect mode*. This mode makes all drawcalls indirect, relying on the
mesh preprocessing shader to allocate instances dynamically. In indirect
mode, the `PreprocessWorkItem` `output_index` points not to a
`MeshUniform` instance slot but instead to a set of `wgpu`
`IndirectParameters`, from which it allocates an instance slot
dynamically if frustum culling succeeds. Batch building has been updated
to allocate and track indirect parameter slots, and the AABBs are now
supplied to the GPU as `MeshCullingData`.
A small amount of code relating to the frustum culling has been borrowed
from meshlets and moved into `maths.wgsl`. Note that standard Bevy
frustum culling uses AABBs, while meshlets use bounding spheres; this
means that not as much code can be shared as one might think.
This patch doesn't provide any way to perform GPU culling on shadow
maps, to avoid making this patch bigger than it already is. That can be
a followup.
## Changelog
### Added
* Frustum culling can now optionally be done on the GPU. To enable it,
add the `GpuCulling` component to a camera.
* To disable CPU frustum culling, add `NoCpuCulling` to a camera. Note
that `GpuCulling` doesn't automatically imply `NoCpuCulling`.
# Objective
Allow `Gizmos` to work in `FixedUpdate` without any changes needed. This
changes `Gizmos` from being a purely immediate mode api, but allows the
user to use it as if it were an immediate mode API regardless of
schedule context.
Also allows for extending by other custom schedules by adding their own
`GizmoStorage<Clear>` and the requisite systems:
- `propagate_gizmos::<Clear>` before `update_gizmo_meshes`
- `stash_default_gizmos` when starting a clear context
- `pop_default_gizmos` when ending a clear context
- `collect_default_gizmos` when grabbing the requested gizmos
- `clear_gizmos` for clearing the context's gizmos
## Solution
Adds a generic to `Gizmos` that defaults to `Update` (the current way
gizmos works). When entering a new clear context the default `Gizmos`
gets swapped out for that context's duration so the context can collect
the gizmos requested.
Prior work: https://github.com/bevyengine/bevy/pull/9153
## To do
- [x] `FixedUpdate` should probably get its own First, Pre, Update,
Post, Last system sets for this. Otherwise users will need to make sure
to order their systems before `clear_gizmos`. This could alternatively
be fixed by moving the setup of this to `bevy_time::fixed`?
PR to fix this issue: https://github.com/bevyengine/bevy/pull/10977
- [x] use mem::take internally for the swaps?
- [x] Better name for the `Context` generic on gizmos? `Clear`?
---
## Changelog
- Gizmos drawn in `FixedMain` now last until the next `FixedMain`
iteration runs.
# Objective
Fix#2128. Both `Query::new_archetype` and `SystemParam::new_archetype`
do not check if the `Archetype` comes from the same World the state is
initialized from. This could result in unsoundness via invalid accesses
if called incorrectly.
## Solution
Make them `unsafe` functions and lift the invariant to the caller. This
also caught one instance of us not validating the World in
`SystemState::update_archetypes_unsafe_world_cell`'s implementation.
---
## Changelog
Changed: `QueryState::new_archetype` is now an unsafe function.
Changed: `SystemParam::new_archetype` is now an unsafe function.
## Migration Guide
`QueryState::new_archetype` and `SystemParam::new_archetype` are now an
unsafe functions that must be sure that the provided `Archetype` is from
the same `World` that the state was initialized from. Callers may need
to add additional assertions or propagate the safety invariant upwards
through the callstack to ensure safety.
# Objective
- `cargo check --workspace` appears to merge features and dependencies
together, so it does not catch some issues where dependencies are not
properly feature-gated.
- The issues **are** caught, though, by running `cd $crate && cargo
check`.
## Solution
- Manually check each crate for issues.
```shell
# Script used
for i in crates/bevy_* do
pushd $i
cargo check
popd
done
```
- `bevy_color` had an issue where it used `#[derive(Pod, Zeroable)]`
without using `bytemuck`'s `derive` feature.
- The `FpsOverlayPlugin` in `bevy_dev_tools` uses `bevy_ui`'s
`bevy_text` integration without properly enabling `bevy_text` as a
feature.
- `bevy_gizmos`'s `light` module was not properly feature-gated behind
`bevy_pbr`.
- ~~Lights appear to only be implemented in `bevy_pbr` and not
`bevy_sprite`, so I think this is the right call. Can I get a
confirmation by a gizmos person?~~ Confirmed :)
- `bevy_gltf` imported `SmallVec`, but only used it if `bevy_animation`
was enabled.
- There was another issue, but it was more challenging to solve than the
`smallvec` one. Run `cargo check -p bevy_gltf` and it will raise an
issue about `animation_roots`.
<details>
<summary><code>bevy_gltf</code> errors</summary>
```shell
error[E0425]: cannot find value `animation_roots` in this scope
--> crates/bevy_gltf/src/loader.rs:608:26
|
608 | &animation_roots,
| ^^^^^^^^^^^^^^^ not found in this scope
warning: variable does not need to be mutable
--> crates/bevy_gltf/src/loader.rs:1015:5
|
1015 | mut animation_context: Option<AnimationContext>,
| ----^^^^^^^^^^^^^^^^^
| |
| help: remove this `mut`
|
= note: `#[warn(unused_mut)]` on by default
For more information about this error, try `rustc --explain E0425`.
warning: `bevy_gltf` (lib) generated 1 warning
error: could not compile `bevy_gltf` (lib) due to 1 previous error; 1 warning emitted
```
</details>
---
## Changelog
- Fixed `bevy_color`, `bevy_dev_tools`, and `bevy_gizmos` so they can
now compile by themselves.
# Objective
- All gizmos APIs besides `gizmos.primitive_3d` use `impl Into<Color>`
as their type for `color`.
## Solution
- This PR changes `primitive_3d()` to use `impl Into<Color>` aswell.
# Objective
- Replace `RenderMaterials` / `RenderMaterials2d` / `RenderUiMaterials`
with `RenderAssets` to enable implementing changes to one thing,
`RenderAssets`, that applies to all use cases rather than duplicating
changes everywhere for multiple things that should be one thing.
- Adopts #8149
## Solution
- Make RenderAsset generic over the destination type rather than the
source type as in #8149
- Use `RenderAssets<PreparedMaterial<M>>` etc for render materials
---
## Changelog
- Changed:
- The `RenderAsset` trait is now implemented on the destination type.
Its `SourceAsset` associated type refers to the type of the source
asset.
- `RenderMaterials`, `RenderMaterials2d`, and `RenderUiMaterials` have
been replaced by `RenderAssets<PreparedMaterial<M>>` and similar.
## Migration Guide
- `RenderAsset` is now implemented for the destination type rather that
the source asset type. The source asset type is now the `RenderAsset`
trait's `SourceAsset` associated type.
Just updating docs for the arc gizmo so that the argument documentation
matches the order of the function arguments.
Also added docs for the color argument.
# Objective
- Improve docs
## Solution
- Moved the radius argument to the end of the argument list to match the
function
---
## Changelog
> N/A
## Migration Guide
> N/A
---------
Co-authored-by: François Mockers <francois.mockers@vleue.com>
# Objective
This is a necessary precursor to #9122 (this was split from that PR to
reduce the amount of code to review all at once).
Moving `!Send` resource ownership to `App` will make it unambiguously
`!Send`. `SubApp` must be `Send`, so it can't wrap `App`.
## Solution
Refactor `App` and `SubApp` to not have a recursive relationship. Since
`SubApp` no longer wraps `App`, once `!Send` resources are moved out of
`World` and into `App`, `SubApp` will become unambiguously `Send`.
There could be less code duplication between `App` and `SubApp`, but
that would break `App` method chaining.
## Changelog
- `SubApp` no longer wraps `App`.
- `App` fields are no longer publicly accessible.
- `App` can no longer be converted into a `SubApp`.
- Various methods now return references to a `SubApp` instead of an
`App`.
## Migration Guide
- To construct a sub-app, use `SubApp::new()`. `App` can no longer
convert into `SubApp`.
- If you implemented a trait for `App`, you may want to implement it for
`SubApp` as well.
- If you're accessing `app.world` directly, you now have to use
`app.world()` and `app.world_mut()`.
- `App::sub_app` now returns `&SubApp`.
- `App::sub_app_mut` now returns `&mut SubApp`.
- `App::get_sub_app` now returns `Option<&SubApp>.`
- `App::get_sub_app_mut` now returns `Option<&mut SubApp>.`
Today, we sort all entities added to all phases, even the phases that
don't strictly need sorting, such as the opaque and shadow phases. This
results in a performance loss because our `PhaseItem`s are rather large
in memory, so sorting is slow. Additionally, determining the boundaries
of batches is an O(n) process.
This commit makes Bevy instead applicable place phase items into *bins*
keyed by *bin keys*, which have the invariant that everything in the
same bin is potentially batchable. This makes determining batch
boundaries O(1), because everything in the same bin can be batched.
Instead of sorting each entity, we now sort only the bin keys. This
drops the sorting time to near-zero on workloads with few bins like
`many_cubes --no-frustum-culling`. Memory usage is improved too, with
batch boundaries and dynamic indices now implicit instead of explicit.
The improved memory usage results in a significant win even on
unbatchable workloads like `many_cubes --no-frustum-culling
--vary-material-data-per-instance`, presumably due to cache effects.
Not all phases can be binned; some, such as transparent and transmissive
phases, must still be sorted. To handle this, this commit splits
`PhaseItem` into `BinnedPhaseItem` and `SortedPhaseItem`. Most of the
logic that today deals with `PhaseItem`s has been moved to
`SortedPhaseItem`. `BinnedPhaseItem` has the new logic.
Frame time results (in ms/frame) are as follows:
| Benchmark | `binning` | `main` | Speedup |
| ------------------------ | --------- | ------- | ------- |
| `many_cubes -nfc -vpi` | 232.179 | 312.123 | 34.43% |
| `many_cubes -nfc` | 25.874 | 30.117 | 16.40% |
| `many_foxes` | 3.276 | 3.515 | 7.30% |
(`-nfc` is short for `--no-frustum-culling`; `-vpi` is short for
`--vary-per-instance`.)
---
## Changelog
### Changed
* Render phases have been split into binned and sorted phases. Binned
phases, such as the common opaque phase, achieve improved CPU
performance by avoiding the sorting step.
## Migration Guide
- `PhaseItem` has been split into `BinnedPhaseItem` and
`SortedPhaseItem`. If your code has custom `PhaseItem`s, you will need
to migrate them to one of these two types. `SortedPhaseItem` requires
the fewest code changes, but you may want to pick `BinnedPhaseItem` if
your phase doesn't require sorting, as that enables higher performance.
## Tracy graphs
`many-cubes --no-frustum-culling`, `main` branch:
<img width="1064" alt="Screenshot 2024-03-12 180037"
src="https://github.com/bevyengine/bevy/assets/157897/e1180ce8-8e89-46d2-85e3-f59f72109a55">
`many-cubes --no-frustum-culling`, this branch:
<img width="1064" alt="Screenshot 2024-03-12 180011"
src="https://github.com/bevyengine/bevy/assets/157897/0899f036-6075-44c5-a972-44d95895f46c">
You can see that `batch_and_prepare_binned_render_phase` is a much
smaller fraction of the time. Zooming in on that function, with yellow
being this branch and red being `main`, we see:
<img width="1064" alt="Screenshot 2024-03-12 175832"
src="https://github.com/bevyengine/bevy/assets/157897/0dfc8d3f-49f4-496e-8825-a66e64d356d0">
The binning happens in `queue_material_meshes`. Again with yellow being
this branch and red being `main`:
<img width="1064" alt="Screenshot 2024-03-12 175755"
src="https://github.com/bevyengine/bevy/assets/157897/b9b20dc1-11c8-400c-a6cc-1c2e09c1bb96">
We can see that there is a small regression in `queue_material_meshes`
performance, but it's not nearly enough to outweigh the large gains in
`batch_and_prepare_binned_render_phase`.
---------
Co-authored-by: James Liu <contact@jamessliu.com>
# Objective
- Disabling some plugins causes a crash due to ambiguities relying in
feature flags and not checking if both plugins are enabled causing code
like this to crash:
`app.add_plugins(DefaultPlugins.build().disable::<AnimationPlugin>())`
## Solution
- Check if plugins were added before ambiguities.
- Move bevy_gizmos ambiguities from bevy_internal to bevy_gizmos since
they already depend on them.
# Objective
- Fixes#12712
## Solution
- Move the `float_ord.rs` file to `bevy_math`
- Change any `bevy_utils::FloatOrd` statements to `bevy_math::FloatOrd`
---
## Changelog
- Moved `FloatOrd` from `bevy_utils` to `bevy_math`
## Migration Guide
- References to `bevy_utils::FloatOrd` should be changed to
`bevy_math::FloatOrd`
# Objective
Resolves#3824. `unsafe` code should be the exception, not the norm in
Rust. It's obviously needed for various use cases as it's interfacing
with platforms and essentially running the borrow checker at runtime in
the ECS, but the touted benefits of Bevy is that we are able to heavily
leverage Rust's safety, and we should be holding ourselves accountable
to that by minimizing our unsafe footprint.
## Solution
Deny `unsafe_code` workspace wide. Add explicit exceptions for the
following crates, and forbid it in almost all of the others.
* bevy_ecs - Obvious given how much unsafe is needed to achieve
performant results
* bevy_ptr - Works with raw pointers, even more low level than bevy_ecs.
* bevy_render - due to needing to integrate with wgpu
* bevy_window - due to needing to integrate with raw_window_handle
* bevy_utils - Several unsafe utilities used by bevy_ecs. Ideally moved
into bevy_ecs instead of made publicly usable.
* bevy_reflect - Required for the unsafe type casting it's doing.
* bevy_transform - for the parallel transform propagation
* bevy_gizmos - For the SystemParam impls it has.
* bevy_assets - To support reflection. Might not be required, not 100%
sure yet.
* bevy_mikktspace - due to being a conversion from a C library. Pending
safe rewrite.
* bevy_dynamic_plugin - Inherently unsafe due to the dynamic loading
nature.
Several uses of unsafe were rewritten, as they did not need to be using
them:
* bevy_text - a case of `Option::unchecked` could be rewritten as a
normal for loop and match instead of an iterator.
* bevy_color - the Pod/Zeroable implementations were replaceable with
bytemuck's derive macros.
# Objective
I found that some .rs files are unnecessarily executable.
Rust source files may start with a shebang-like statement `#!`, so let's
make sure they are not executable just in case.
Here is the result of the `find` commend that lists executable .rs files
as of main branch `86bd648`.
```console
$ find -name \*.rs -type f -executable
./crates/bevy_gizmos/src/lib.rs
./crates/bevy_tasks/src/lib.rs
./crates/bevy_time/src/lib.rs
./crates/bevy_transform/src/lib.rs
./src/lib.rs
```
It appears that the permissions of those files were originally 644, but
were unexpectedly changed to 755 by commit
52e3f2007b.
## Solution
Make them not executable by using this command;
`find -name \*.rs -type f -executable -exec chmod --verbose a-x -- {}
\+`
# Objective
- Adds line styles to bevy gizmos, suggestion of #9400
- Currently solid and dotted lines are implemented but this can easily
be extended to support dashed lines as well if that is wanted.
## Solution
- Adds the enum `GizmoLineStyle` and uses it in each `GizmoConfig` to
configure the style of the line.
- Each "dot" in a dotted line has the same width and height as the
`line_width` of the corresponding line.
---
## Changelog
- Added `GizmoLineStyle` to `bevy_gizmos`
- Added a `line_style: GizmoLineStyle ` attribute to `GizmoConfig`
- Updated the `lines.wgsl` shader and the pipelines accordingly.
## Migration Guide
- Any manually created `GizmoConfig` must now include the `line_style`
attribute
## Additional information
Some pretty pictures :)
This is the 3d_gizmos example with/without `line_perspective`:
<img width="1440" alt="Screenshot 2024-03-09 at 23 25 53"
src="https://github.com/bevyengine/bevy/assets/62256001/b1b97311-e78d-4de3-8dfe-9e48a35bb27d">
<img width="1440" alt="Screenshot 2024-03-09 at 23 25 39"
src="https://github.com/bevyengine/bevy/assets/62256001/50ee8ecb-5290-484d-ba36-7fd028374f7f">
And the 2d example:
<img width="1440" alt="Screenshot 2024-03-09 at 23 25 06"
src="https://github.com/bevyengine/bevy/assets/62256001/4452168f-d605-4333-bfa5-5461d268b132">
---------
Co-authored-by: BD103 <59022059+BD103@users.noreply.github.com>
# Objective
Currently the built docs only shows the logo and favicon for the top
level `bevy` crate. This makes views like
https://docs.rs/bevy_ecs/latest/bevy_ecs/ look potentially unrelated to
the project at first glance.
## Solution
Reproduce the docs attributes for every crate that Bevy publishes.
Ideally this would be done with some workspace level Cargo.toml control,
but AFAICT, such support does not exist.
# Objective
- Adds 3d grids, suggestion of #9400
## Solution
- Added 3d grids (grids spanning all three dimensions, not flat grids)
to bevy_gizmos
---
## Changelog
- `gizmos.grid(...)` and `gizmos.grid_2d(...)` now return a
`GridBuilder2d`.
- Added `gizmos.grid_3d(...)` which returns a `GridBuilder3d`.
- The difference between them is basically only that `GridBuilder3d`
exposes some methods for configuring the z axis while the 2d version
doesn't.
- Allowed for drawing the outer edges along a specific axis by calling
`.outer_edges_x()`, etc. on the builder.
## Additional information
Please note that I have not added the 3d grid to any example as not to
clutter them.
Here is an image of what the 3d grid looks like:
<img width="1440" alt="Screenshot 2024-03-12 at 02 19 55"
src="https://github.com/bevyengine/bevy/assets/62256001/4cd3b7de-cf2c-4f05-8a79-920a4dd804b8">
---------
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
# Objective
- Adds gizmo line joints, suggestion of #9400
## Solution
- Adds `line_joints: GizmoLineJoint` to `GizmoConfig`. Currently the
following values are supported:
- `GizmoLineJoint::None`: does not draw line joints, same behaviour as
previously
- `GizmoLineJoint::Bevel`: draws a single triangle between the lines
- `GizmoLineJoint::Miter` / 'spiky joints': draws two triangles between
the lines extending them until they meet at a (miter) point.
- NOTE: for very small angles between the lines, which happens
frequently in 3d, the miter point will be very far away from the point
at which the lines meet.
- `GizmoLineJoint::Round(resolution)`: Draw a circle arc between the
lines. The circle is a triangle fan of `resolution` triangles.
---
## Changelog
- Added `GizmoLineJoint`, use that in `GizmoConfig` and added necessary
pipelines and draw commands.
- Added a new `line_joints.wgsl` shader containing three vertex shaders
`vertex_bevel`, `vertex_miter` and `vertex_round` as well as a basic
`fragment` shader.
## Migration Guide
Any manually created `GizmoConfig`s must now set the `.line_joints`
field.
## Known issues
- The way we currently create basic closed shapes like rectangles,
circles, triangles or really any closed 2d shape means that one of the
corners will not be drawn with joints, although that would probably be
expected. (see the triangle in the 2d image)
- This could be somewhat mitigated by introducing line caps or fixed by
adding another segment overlapping the first of the strip. (Maybe in a
followup PR?)
- 3d shapes can look 'off' with line joints (especially bevel) because
wherever 3 or more lines meet one of them may stick out beyond the joint
drawn between the other 2.
- Adding additional lines so that there is a joint between every line at
a corner would fix this but would probably be too computationally
expensive.
- Miter joints are 'unreasonably long' for very small angles between the
lines (the angle is the angle between the lines in screen space). This
is technically correct but distracting and does not feel right,
especially in 3d contexts. I think limiting the length of the miter to
the point at which the lines meet might be a good idea.
- The joints may be drawn with a different gizmo in-between them and
their corresponding lines in 2d. Some sort of z-ordering would probably
be good here, but I believe this may be out of scope for this PR.
## Additional information
Some pretty images :)
<img width="1175" alt="Screenshot 2024-03-02 at 04 53 50"
src="https://github.com/bevyengine/bevy/assets/62256001/58df7e63-9376-4430-8871-32adba0cb53b">
- Note that the top vertex does not have a joint drawn.
<img width="1440" alt="Screenshot 2024-03-02 at 05 03 55"
src="https://github.com/bevyengine/bevy/assets/62256001/137a00cf-cbd4-48c2-a46f-4b47492d4fd9">
Now for a weird video:
https://github.com/bevyengine/bevy/assets/62256001/93026f48-f1d6-46fe-9163-5ab548a3fce4
- The black lines shooting out from the cube are miter joints that get
very long because the lines between which they are drawn are (almost)
collinear in screen space.
---------
Co-authored-by: Pablo Reinhardt <126117294+pablo-lua@users.noreply.github.com>
# Objective
Rotating vectors is a very common task. It is required for a variety of
things both within Bevy itself and in many third party plugins, for
example all over physics and collision detection, and for things like
Bevy's bounding volumes and several gizmo implementations.
For 3D, we can do this using a `Quat`, but for 2D, we do not have a
clear and efficient option. `Mat2` can be used for rotating vectors if
created using `Mat2::from_angle`, but this is not obvious to many users,
it doesn't have many rotation helpers, and the type does not give any
guarantees that it represents a valid rotation.
We should have a proper type for 2D rotations. In addition to allowing
for potential optimization, it would allow us to have a consistent and
explicitly documented representation used throughout the engine, i.e.
counterclockwise and in radians.
## Representation
The mathematical formula for rotating a 2D vector is the following:
```
new_x = x * cos - y * sin
new_y = x * sin + y * cos
```
Here, `sin` and `cos` are the sine and cosine of the rotation angle.
Computing these every time when a vector needs to be rotated can be
expensive, so the rotation shouldn't be just an `f32` angle. Instead, it
is often more efficient to represent the rotation using the sine and
cosine of the angle instead of storing the angle itself. This can be
freely passed around and reused without unnecessary computations.
The two options are either a 2x2 rotation matrix or a unit complex
number where the cosine is the real part and the sine is the imaginary
part. These are equivalent for the most part, but the unit complex
representation is a bit more memory efficient (two `f32`s instead of
four), so I chose that. This is like Nalgebra's
[`UnitComplex`](https://docs.rs/nalgebra/latest/nalgebra/geometry/type.UnitComplex.html)
type, which can be used for the
[`Rotation2`](https://docs.rs/nalgebra/latest/nalgebra/geometry/type.Rotation2.html)
type.
## Implementation
Add a `Rotation2d` type represented as a unit complex number:
```rust
/// A counterclockwise 2D rotation in radians.
///
/// The rotation angle is wrapped to be within the `]-pi, pi]` range.
pub struct Rotation2d {
/// The cosine of the rotation angle in radians.
///
/// This is the real part of the unit complex number representing the rotation.
pub cos: f32,
/// The sine of the rotation angle in radians.
///
/// This is the imaginary part of the unit complex number representing the rotation.
pub sin: f32,
}
```
Using it is similar to using `Quat`, but in 2D:
```rust
let rotation = Rotation2d::radians(PI / 2.0);
// Rotate vector (also works on Direction2d!)
assert_eq!(rotation * Vec2::X, Vec2::Y);
// Get angle as degrees
assert_eq!(rotation.as_degrees(), 90.0);
// Getting sin and cos is free
let (sin, cos) = rotation.sin_cos();
// "Subtract" rotations
let rotation2 = Rotation2d::FRAC_PI_4; // there are constants!
let diff = rotation * rotation2.inverse();
assert_eq!(diff.as_radians(), PI / 4.0);
// This is equivalent to the above
assert_eq!(rotation2.angle_between(rotation), PI / 4.0);
// Lerp
let rotation1 = Rotation2d::IDENTITY;
let rotation2 = Rotation2d::FRAC_PI_2;
let result = rotation1.lerp(rotation2, 0.5);
assert_eq!(result.as_radians(), std::f32::consts::FRAC_PI_4);
// Slerp
let rotation1 = Rotation2d::FRAC_PI_4);
let rotation2 = Rotation2d::degrees(-180.0); // we can use degrees too!
let result = rotation1.slerp(rotation2, 1.0 / 3.0);
assert_eq!(result.as_radians(), std::f32::consts::FRAC_PI_2);
```
There's also a `From<f32>` implementation for `Rotation2d`, which means
that methods can still accept radians as floats if the argument uses
`impl Into<Rotation2d>`. This means that adding `Rotation2d` shouldn't
even be a breaking change.
---
## Changelog
- Added `Rotation2d`
- Bounding volume methods now take an `impl Into<Rotation2d>`
- Gizmo methods with rotation now take an `impl Into<Rotation2d>`
## Future use cases
- Collision detection (a type like this is quite essential considering
how common vector rotations are)
- `Transform` helpers (e.g. return a 2D rotation about the Z axis from a
`Transform`)
- The rotation used for `Transform2d` (#8268)
- More gizmos, maybe meshes... everything in 2D that uses rotation
---------
Co-authored-by: Tristan Guichaoua <33934311+tguichaoua@users.noreply.github.com>
Co-authored-by: Robert Walter <robwalter96@gmail.com>
Co-authored-by: IQuick 143 <IQuick143cz@gmail.com>
# Objective
Fix missing `TextBundle` (and many others) which are present in the main
crate as default features but optional in the sub-crate. See:
- https://docs.rs/bevy/0.13.0/bevy/ui/node_bundles/index.html
- https://docs.rs/bevy_ui/0.13.0/bevy_ui/node_bundles/index.html
~~There are probably other instances in other crates that I could track
down, but maybe "all-features = true" should be used by default in all
sub-crates? Not sure.~~ (There were many.) I only noticed this because
rust-analyzer's "open docs" features takes me to the sub-crate, not the
main one.
## Solution
Add "all-features = true" to docs.rs metadata for crates that use
features.
## Changelog
### Changed
- Unified features documented on docs.rs between main crate and
sub-crates
# Objective
Make bevy_utils less of a compilation bottleneck. Tackle #11478.
## Solution
* Move all of the directly reexported dependencies and move them to
where they're actually used.
* Remove the UUID utilities that have gone unused since `TypePath` took
over for `TypeUuid`.
* There was also a extraneous bytemuck dependency on `bevy_core` that
has not been used for a long time (since `encase` became the primary way
to prepare GPU buffers).
* Remove the `all_tuples` macro reexport from bevy_ecs since it's
accessible from `bevy_utils`.
---
## Changelog
Removed: Many of the reexports from bevy_utils (petgraph, uuid, nonmax,
smallvec, and thiserror).
Removed: bevy_core's reexports of bytemuck.
## Migration Guide
bevy_utils' reexports of petgraph, uuid, nonmax, smallvec, and thiserror
have been removed.
bevy_core' reexports of bytemuck's types has been removed.
Add them as dependencies in your own crate instead.
# Objective
- Part of #9400.
- Add light gizmos for `SpotLight`, `PointLight` and `DirectionalLight`.
## Solution
- Add a `ShowLightGizmo` and its related gizmo group and plugin, that
shows a gizmo for all lights of an entities when inserted on it. Light
display can also be toggled globally through the gizmo config in the
same way it can already be done for `Aabb`s.
- Add distinct segment setters for height and base one `Cone3dBuilder`.
This allow having a properly rounded base without too much edges along
the height. The doc comments explain how to ensure height and base
connect when setting different values.
Gizmo for the three light types without radius with the depth bias set
to -1:
With Radius:
Possible future improvements:
- Add a billboarded sprite with a distinct sprite for each light type.
- Display the intensity of the light somehow (no idea how to represent
that apart from some text).
---
## Changelog
### Added
- The new `ShowLightGizmo`, part of the `LightGizmoPlugin` and
configurable globally with `LightGizmoConfigGroup`, allows drawing gizmo
for `PointLight`, `SpotLight` and `DirectionalLight`. The gizmos color
behavior can be controlled with the `LightGizmoColor` member of
`ShowLightGizmo` and `LightGizmoConfigGroup`.
- The cone gizmo builder (`Cone3dBuilder`) now allows setting a
differing number of segments for the base and height.
---------
Co-authored-by: Gino Valente <49806985+MrGVSV@users.noreply.github.com>
# Objective
Fixes#11298. Make the use of bevy_log vs bevy_utils::tracing more
consistent.
## Solution
Replace all uses of bevy_log's logging macros with the reexport from
bevy_utils. Remove bevy_log as a dependency where it's no longer needed
anymore.
Ideally we should just be using tracing directly, but given that all of
these crates are already using bevy_utils, this likely isn't that great
of a loss right now.
# Objective
- We introduce a gizmo that displays coordinate axes relative to a
Transform*, primarily for debugging purposes.
- See #9400
## Solution
A new method, `Gizmos::axes`, takes a `Transform`* as input and displays
the standard coordinate axes, transformed according to it; its signature
looks like this:
````rust
pub fn axes(&mut self, transform: into TransformPoint, base_length: f32) { //... }
````
If my carefully placed asterisks hadn't already tipped you off, the
argument here is not actually a `Transform` but instead anything which
implements `TransformPoint`, which allows it to work also with
`GlobalTransform` (and also `Mat4` and `Affine3A`, if the user happens
to be hand-rolling transformations in some way).
The `base_length` parameter is a scaling factor applied to the
coordinate vectors before the transformation takes place; in other
words, the caller can use this to help size the coordinate axes
appropriately for the entity that they are attached to.
An example invocation of this method looks something like this:
````rust
fn draw_axes_system(
mut gizmos: Gizmos,
query: Query<&Transform, With<MyMarkerComponent>>,
) {
for &transform in &query {
gizmos.axes(transform, 2.);
}
}
````
The result is the three coordinate axes, X, Y, Z (colored red, green,
and blue, respectively), drawn onto the entity:
<img width="206" alt="Screenshot 2024-02-29 at 2 41 45 PM"
src="https://github.com/bevyengine/bevy/assets/2975848/789d1703-29ae-4295-80ab-b87459cf8037">
Note that, if scaling was applied as part of the given transformation,
it shows up in scaling on the axes as well:
<img width="377" alt="Screenshot 2024-02-29 at 2 43 53 PM"
src="https://github.com/bevyengine/bevy/assets/2975848/6dc1caf4-8b3e-47f7-a86a-8906d870fa72">
---
## Changelog
- Added `Gizmos::axes` in bevy_gizmos/src/arrows.rs
- Fixed a minor issue with `ArrowBuilder::with_tip_length` not correctly
implementing builder style (no external impact)
---
## Discussion
### Design considerations
I feel pretty strongly that having no default length scale is for the
best, at least for the time being, since it's very easy for the length
scale to be too small, leading to the axes being hidden inside the body
of the object they are associated with. That is, if the API instead
looked like this:
````rust
gizmos.axes(transform); // or
gizmos.axes(transform).with_length_scale(3.0);
````
then I think it's a reasonable expectation that the first thing would
"just work" for most applications, and it wouldn't, which would be kind
of a footgun.
### Future steps
There are a few directions that this might expand in the future:
1. Introduce additional options via the standard builder pattern; i.e.
introducing `AxesBuilder<T: TransformPoint>` so that people can
configure the axis colors, normalize all axes to a fixed length
independent of scale deformations, etc.
2. Fold this functionality into a plugin (like AabbGizmoPlugin) so that
the functionality becomes more-or-less automatic based on certain fixed
marker components. This wouldn't be very hard to implement, and it has
the benefit of making the axes more frictionless to use. Furthermore, if
we coupled this to the AABB functionality we already have, we could also
ensure that the plugin automatically sizes the axes (by coupling their
size to the dimensions of the AABB, for example).
3. Implement something similar for 2d. Honestly, I have no idea if this
is desired/useful, but I could probably just implement it in this PR if
that's the case.
# Objective
- As part of the migration process we need to a) see the end effect of
the migration on user ergonomics b) check for serious perf regressions
c) actually migrate the code
- To accomplish this, I'm going to attempt to migrate all of the
remaining user-facing usages of `LegacyColor` in one PR, being careful
to keep a clean commit history.
- Fixes#12056.
## Solution
I've chosen to use the polymorphic `Color` type as our standard
user-facing API.
- [x] Migrate `bevy_gizmos`.
- [x] Take `impl Into<Color>` in all `bevy_gizmos` APIs
- [x] Migrate sprites
- [x] Migrate UI
- [x] Migrate `ColorMaterial`
- [x] Migrate `MaterialMesh2D`
- [x] Migrate fog
- [x] Migrate lights
- [x] Migrate StandardMaterial
- [x] Migrate wireframes
- [x] Migrate clear color
- [x] Migrate text
- [x] Migrate gltf loader
- [x] Register color types for reflection
- [x] Remove `LegacyColor`
- [x] Make sure CI passes
Incidental improvements to ease migration:
- added `Color::srgba_u8`, `Color::srgba_from_array` and friends
- added `set_alpha`, `is_fully_transparent` and `is_fully_opaque` to the
`Alpha` trait
- add and immediately deprecate (lol) `Color::rgb` and friends in favor
of more explicit and consistent `Color::srgb`
- standardized on white and black for most example text colors
- added vector field traits to `LinearRgba`: ~~`Add`, `Sub`,
`AddAssign`, `SubAssign`,~~ `Mul<f32>` and `Div<f32>`. Multiplications
and divisions do not scale alpha. `Add` and `Sub` have been cut from
this PR.
- added `LinearRgba` and `Srgba` `RED/GREEN/BLUE`
- added `LinearRgba_to_f32_array` and `LinearRgba::to_u32`
## Migration Guide
Bevy's color types have changed! Wherever you used a
`bevy::render::Color`, a `bevy::color::Color` is used instead.
These are quite similar! Both are enums storing a color in a specific
color space (or to be more precise, using a specific color model).
However, each of the different color models now has its own type.
TODO...
- `Color::rgba`, `Color::rgb`, `Color::rbga_u8`, `Color::rgb_u8`,
`Color::rgb_from_array` are now `Color::srgba`, `Color::srgb`,
`Color::srgba_u8`, `Color::srgb_u8` and `Color::srgb_from_array`.
- `Color::set_a` and `Color::a` is now `Color::set_alpha` and
`Color::alpha`. These are part of the `Alpha` trait in `bevy_color`.
- `Color::is_fully_transparent` is now part of the `Alpha` trait in
`bevy_color`
- `Color::r`, `Color::set_r`, `Color::with_r` and the equivalents for
`g`, `b` `h`, `s` and `l` have been removed due to causing silent
relatively expensive conversions. Convert your `Color` into the desired
color space, perform your operations there, and then convert it back
into a polymorphic `Color` enum.
- `Color::hex` is now `Srgba::hex`. Call `.into` or construct a
`Color::Srgba` variant manually to convert it.
- `WireframeMaterial`, `ExtractedUiNode`, `ExtractedDirectionalLight`,
`ExtractedPointLight`, `ExtractedSpotLight` and `ExtractedSprite` now
store a `LinearRgba`, rather than a polymorphic `Color`
- `Color::rgb_linear` and `Color::rgba_linear` are now
`Color::linear_rgb` and `Color::linear_rgba`
- The various CSS color constants are no longer stored directly on
`Color`. Instead, they're defined in the `Srgba` color space, and
accessed via `bevy::color::palettes::css`. Call `.into()` on them to
convert them into a `Color` for quick debugging use, and consider using
the much prettier `tailwind` palette for prototyping.
- The `LIME_GREEN` color has been renamed to `LIMEGREEN` to comply with
the standard naming.
- Vector field arithmetic operations on `Color` (add, subtract, multiply
and divide by a f32) have been removed. Instead, convert your colors
into `LinearRgba` space, and perform your operations explicitly there.
This is particularly relevant when working with emissive or HDR colors,
whose color channel values are routinely outside of the ordinary 0 to 1
range.
- `Color::as_linear_rgba_f32` has been removed. Call
`LinearRgba::to_f32_array` instead, converting if needed.
- `Color::as_linear_rgba_u32` has been removed. Call
`LinearRgba::to_u32` instead, converting if needed.
- Several other color conversion methods to transform LCH or HSL colors
into float arrays or `Vec` types have been removed. Please reimplement
these externally or open a PR to re-add them if you found them
particularly useful.
- Various methods on `Color` such as `rgb` or `hsl` to convert the color
into a specific color space have been removed. Convert into
`LinearRgba`, then to the color space of your choice.
- Various implicitly-converting color value methods on `Color` such as
`r`, `g`, `b` or `h` have been removed. Please convert it into the color
space of your choice, then check these properties.
- `Color` no longer implements `AsBindGroup`. Store a `LinearRgba`
internally instead to avoid conversion costs.
---------
Co-authored-by: Alice Cecile <alice.i.cecil@gmail.com>
Co-authored-by: Afonso Lage <lage.afonso@gmail.com>
Co-authored-by: Rob Parrett <robparrett@gmail.com>
Co-authored-by: Zachary Harrold <zac@harrold.com.au>
# Objective
Split up from #12017, rename Bevy's direction types.
Currently, Bevy has the `Direction2d`, `Direction3d`, and `Direction3dA`
types, which provide a type-level guarantee that their contained vectors
remain normalized. They can be very useful for a lot of APIs for safety,
explicitness, and in some cases performance, as they can sometimes avoid
unnecessary normalizations.
However, many consider them to be inconvenient to use, and opt for
standard vector types like `Vec3` because of this. One reason is that
the direction type names are a bit long and can be annoying to write (of
course you can use autocomplete, but just typing `Vec3` is still nicer),
and in some intances, the extra characters can make formatting worse.
The naming is also inconsistent with Glam's shorter type names, and
results in names like `Direction3dA`, which (in my opinion) are
difficult to read and even a bit ugly.
This PR proposes renaming the types to `Dir2`, `Dir3`, and `Dir3A`.
These names are nice and easy to write, consistent with Glam, and work
well for variants like the SIMD aligned `Dir3A`. As a bonus, it can also
result in nicer formatting in a lot of cases, which can be seen from the
diff of this PR.
Some examples of what it looks like: (copied from #12017)
```rust
// Before
let ray_cast = RayCast2d::new(Vec2::ZERO, Direction2d::X, 5.0);
// After
let ray_cast = RayCast2d::new(Vec2::ZERO, Dir2::X, 5.0);
```
```rust
// Before (an example using Bevy XPBD)
let hit = spatial_query.cast_ray(
Vec3::ZERO,
Direction3d::X,
f32::MAX,
true,
SpatialQueryFilter::default(),
);
// After
let hit = spatial_query.cast_ray(
Vec3::ZERO,
Dir3::X,
f32::MAX,
true,
SpatialQueryFilter::default(),
);
```
```rust
// Before
self.circle(
Vec3::new(0.0, -2.0, 0.0),
Direction3d::Y,
5.0,
Color::TURQUOISE,
);
// After (formatting is collapsed in this case)
self.circle(Vec3::new(0.0, -2.0, 0.0), Dir3::Y, 5.0, Color::TURQUOISE);
```
## Solution
Rename `Direction2d`, `Direction3d`, and `Direction3dA` to `Dir2`,
`Dir3`, and `Dir3A`.
---
## Migration Guide
The `Direction2d` and `Direction3d` types have been renamed to `Dir2`
and `Dir3`.
## Additional Context
This has been brought up on the Discord a few times, and we had a small
[poll](https://discord.com/channels/691052431525675048/1203087353850364004/1212465038711984158)
on this. `Dir2`/`Dir3`/`Dir3A` was quite unanimously chosen as the best
option, but of course it was a very small poll and inconclusive, so
other opinions are certainly welcome too.
---------
Co-authored-by: IceSentry <c.giguere42@gmail.com>
# Objective
- Fixes#12170
## Solution
- Moved the existing `color_from_entity` internals into
`Hsla::sequence_dispersed` which generates a randomly distributed but
deterministic color sequence based.
- Replicated the method for `Lcha` and `Oklcha` as well.
## Examples
### Getting a few colours for a quick palette
```rust
let palette = Hsla::sequence_dispersed().take(5).collect::<Vec<_>>();
/*[
Hsla::hsl(0.0, 1., 0.5),
Hsla::hsl(222.49225, 1., 0.5),
Hsla::hsl(84.984474, 1., 0.5),
Hsla::hsl(307.4767, 1., 0.5),
Hsla::hsl(169.96895, 1., 0.5),
]*/
```
### Getting a colour from an `Entity`
```rust
let color = Oklcha::sequence_dispersed().nth(entity.index() as u32).unwrap();
```
## Notes
This was previously a private function exclusively for `Entity` types.
I've decided it should instead be public and operate on a `u32`
directly, since this function may have broader uses for debugging
purposes.
---------
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
# Objective
- Implement grid gizmos, suggestion of #9400
## Solution
- Added `gizmos.grid(...) ` and `gizmos.grid_2d(...)`
- The grids may be configured using `.outer_edges(...)` to specify
whether to draw the outer border/edges of the grid and `.skew(...)`to
specify the skew of the grid along the x or y directions.
---
## Changelog
- Added a `grid` module to `bevy_gizmos` containing `gizmos.grid(...) `
and `gizmos.grid_2d(...)` as well as assorted items.
- Updated the `2d_gizmos` and `3d_gizmos` examples to use grids.
## Additional
The 2D and 3D examples now look like this:
<img width="1440" alt="Screenshot 2024-02-20 at 15 09 40"
src="https://github.com/bevyengine/bevy/assets/62256001/ce04191e-d839-4faf-a6e3-49b6bb4b922b">
<img width="1440" alt="Screenshot 2024-02-20 at 15 10 07"
src="https://github.com/bevyengine/bevy/assets/62256001/317459ba-d452-42eb-ae95-7c84cdbd569b">
# Objective
This PR arose as part of the migration process for `bevy_color`: see
#12056.
While examining how `bevy_gizmos` stores color types internally, I found
that rather than storing a `Color` internally, it actually stores a
`[f32;4]` for a linear RGB, type aliased to a `ColorItem`.
While we don't *have* to clean this up to complete the migration, now
that we have explicit strong typing for linear color types we should use
them rather than replicating this idea throughout the codebase.
## Solution
- Added `LinearRgba::NAN`, for when you want to do cursed rendering
things.
- Replaced the internal color representation in `bevy_gizmo`: this was
`ColorItem`, but is now `LinearRgba`.
- `LinearRgba` is now `Pod`, enabling us to use the same fast `bytemuck`
bit twiddling tricks that we were using before. This requires:
1. Forcing `LinearRgba` to be `repr(C)`
2. Implementing `Zeroable`, and unsafe trait which defines what the
struct looks like when all values are zero.
3. Implementing `Pod`, a marker trait with stringent safety requirements
that is required for "plain old data".
---------
Co-authored-by: Alice Cecile <alice.i.cecil@gmail.com>
# Objective
- During rendering of different gizmo groups, the ordering is random
between executions
## Solution
- Make the ordering stable
- It's using a `TypeIdMap`, its iteration order depends on the insertion
order. so insert when adding a group instead of when adding a gizmo
- Also changed `extract_gizmo_data` to not be group dependent. there
will be only one of those systems, no matter the number of gizmo groups
added
---------
Co-authored-by: pablo-lua <126117294+pablo-lua@users.noreply.github.com>
# Objective
Split up from #12017, add an aligned version of `Direction3d` for SIMD,
and move direction types out of `primitives`.
## Solution
Add `Direction3dA` and move direction types into a new `direction`
module.
---
## Migration Guide
The `Direction2d`, `Direction3d`, and `InvalidDirectionError` types have
been moved out of `bevy::math::primitives`.
Before:
```rust
use bevy::math::primitives::Direction3d;
```
After:
```rust
use bevy::math::Direction3d;
```
---------
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
# Objective
- Make `GizmoConfigStore` play well with reflection-based workflows like
editors.
## Solution
- `#[derive(Reflect)]` and call `.register_type()`.
# Objective
The migration process for `bevy_color` (#12013) will be fairly involved:
there will be hundreds of affected files, and a large number of APIs.
## Solution
To allow us to proceed granularly, we're going to keep both
`bevy_color::Color` (new) and `bevy_render::Color` (old) around until
the migration is complete.
However, simply doing this directly is confusing! They're both called
`Color`, making it very hard to tell when a portion of the code has been
ported.
As discussed in #12056, by renaming the old `Color` type, we can make it
easier to gradually migrate over, one API at a time.
## Migration Guide
THIS MIGRATION GUIDE INTENTIONALLY LEFT BLANK.
This change should not be shipped to end users: delete this section in
the final migration guide!
---------
Co-authored-by: Alice Cecile <alice.i.cecil@gmail.com>
Fixes#12016.
Bump version after release
This PR has been auto-generated
Co-authored-by: Bevy Auto Releaser <41898282+github-actions[bot]@users.noreply.github.com>
Co-authored-by: François <mockersf@gmail.com>
# Objective
- Some workspace members do not inherit the global lints.
## Solution
- Add a `[lints]` entry for all files returned by `rg
--files-without-match -F "[lints]" **/Cargo.toml`, except the compile
failure tests since these aren't part of the workspace.
- Add some docstrings where needed.
---------
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
# Objective
I tried using `insert_gizmo_group` to configure my physics gizmos in a
bevy_xpbd example, but was surprised to see that nothing happened. I
found out that the method does *not* overwrite gizmo groups that have
already been initialized (with `init_gizmo_group`). This is unexpected,
since methods like `insert_resource` *do* overwrite.
## Solution
Insert the configuration even if it has already been initialized.
This fixes a `FIXME` in `extract_meshes` and results in a performance
improvement.
As a result of this change, meshes in the render world might not be
attached to entities anymore. Therefore, the `entity` parameter to
`RenderCommand::render()` is now wrapped in an `Option`. Most
applications that use the render app's ECS can simply unwrap the
`Option`.
Note that for now sprites, gizmos, and UI elements still use the render
world as usual.
## Migration guide
* For efficiency reasons, some meshes in the render world may not have
corresponding `Entity` IDs anymore. As a result, the `entity` parameter
to `RenderCommand::render()` is now wrapped in an `Option`. Custom
rendering code may need to be updated to handle the case in which no
`Entity` exists for an object that is to be rendered.
This is just a minor fix extracted from #11697
A logic error. We tried to close the polygon shape, if the user
specifies an
unclosed polygon. The closing linestring previously didn't close the
polygon
though, but instead added a zero length line at the last coordinate.
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
Use `TypeIdMap<T>` instead of `HashMap<TypeId, T>`
- ~~`TypeIdMap` was in `bevy_ecs`. I've kept it there because of
#11478~~
- ~~I haven't swapped `bevy_reflect` over because it doesn't depend on
`bevy_ecs`, but I'd also be happy with moving `TypeIdMap` to
`bevy_utils` and then adding a dependency to that~~
- ~~this is a slight change in the public API of
`DrawFunctionsInternal`, does this need to go in the changelog?~~
## Changelog
- moved `TypeIdMap` to `bevy_utils`
- changed `DrawFunctionsInternal::indices` to `TypeIdMap`
## Migration Guide
- `TypeIdMap` now lives in `bevy_utils`
- `DrawFunctionsInternal::indices` now uses a `TypeIdMap`.
---------
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
# Objective
Currently the `missing_docs` lint is allowed-by-default and enabled at
crate level when their documentations is complete (see #3492).
This PR proposes to inverse this logic by making `missing_docs`
warn-by-default and mark crates with imcomplete docs allowed.
## Solution
Makes `missing_docs` warn at workspace level and allowed at crate level
when the docs is imcomplete.
The PR is in a reviewable state now in the sense that the basic
implementations are there. There are still some ToDos that I'm aware of:
- [x] docs for all the new structs and traits
- [x] implement `Default` and derive other useful traits for the new
structs
- [x] Take a look at the notes again (Do this after a first round of
reviews)
- [x] Take care of the repetition in the circle drawing functions
---
# Objective
- TLDR: This PR enables us to quickly draw all the newly added
primitives from `bevy_math` in immediate mode with gizmos
- Addresses #10571
## Solution
- This implements the first design idea I had that covered everything
that was mentioned in the Issue
https://github.com/bevyengine/bevy/issues/10571#issuecomment-1863646197
---
## Caveats
- I added the `Primitive(2/3)d` impls for `Direction(2/3)d` to make them
work with the current solution. We could impose less strict requirements
for the gizmoable objects and remove the impls afterwards if the
community doesn't like the current approach.
---
## Changelog
- implement capabilities to draw ellipses on the gizmo in general (this
was required to have some code which is able to draw the ellipse
primitive)
- refactored circle drawing code to use the more general ellipse drawing
code to keep code duplication low
- implement `Primitive2d` for `Direction2d` and impl `Primitive3d` for
`Direction3d`
- implement trait to draw primitives with specialized details with
gizmos
- `GizmoPrimitive2d` for all the 2D primitives
- `GizmoPrimitive3d` for all the 3D primitives
- (question while writing this: Does it actually matter if we split this
in 2D and 3D? I guess it could be useful in the future if we do
something based on the main rendering mode even though atm it's kinda
useless)
---
---------
Co-authored-by: nothendev <borodinov.ilya@gmail.com>
# Objective
Right now, all assets in the main world get extracted and prepared in
the render world (if the asset's using the RenderAssetPlugin). This is
unfortunate for two cases:
1. **TextureAtlas** / **FontAtlas**: This one's huge. The individual
`Image` assets that make up the atlas are cloned and prepared
individually when there's no reason for them to be. The atlas textures
are built on the CPU in the main world. *There can be hundreds of images
that get prepared for rendering only not to be used.*
2. If one loads an Image and needs to transform it in a system before
rendering it, kind of like the [decompression
example](https://github.com/bevyengine/bevy/blob/main/examples/asset/asset_decompression.rs#L120),
there's a price paid for extracting & preparing the asset that's not
intended to be rendered yet.
------
* References #10520
* References #1782
## Solution
This changes the `RenderAssetPersistencePolicy` enum to bitflags. I felt
that the objective with the parameter is so similar in nature to wgpu's
[`TextureUsages`](https://docs.rs/wgpu/latest/wgpu/struct.TextureUsages.html)
and
[`BufferUsages`](https://docs.rs/wgpu/latest/wgpu/struct.BufferUsages.html),
that it may as well be just like that.
```rust
// This asset only needs to be in the main world. Don't extract and prepare it.
RenderAssetUsages::MAIN_WORLD
// Keep this asset in the main world and
RenderAssetUsages::MAIN_WORLD | RenderAssetUsages::RENDER_WORLD
// This asset is only needed in the render world. Remove it from the asset server once extracted.
RenderAssetUsages::RENDER_WORLD
```
### Alternate Solution
I considered introducing a third field to `RenderAssetPersistencePolicy`
enum:
```rust
enum RenderAssetPersistencePolicy {
/// Keep the asset in the main world after extracting to the render world.
Keep,
/// Remove the asset from the main world after extracting to the render world.
Unload,
/// This doesn't need to be in the render world at all.
NoExtract, // <-----
}
```
Functional, but this seemed like shoehorning. Another option is renaming
the enum to something like:
```rust
enum RenderAssetExtractionPolicy {
/// Extract the asset and keep it in the main world.
Extract,
/// Remove the asset from the main world after extracting to the render world.
ExtractAndUnload,
/// This doesn't need to be in the render world at all.
NoExtract,
}
```
I think this last one could be a good option if the bitflags are too
clunky.
## Migration Guide
* `RenderAssetPersistencePolicy::Keep` → `RenderAssetUsage::MAIN_WORLD |
RenderAssetUsage::RENDER_WORLD` (or `RenderAssetUsage::default()`)
* `RenderAssetPersistencePolicy::Unload` →
`RenderAssetUsage::RENDER_WORLD`
* For types implementing the `RenderAsset` trait, change `fn
persistence_policy(&self) -> RenderAssetPersistencePolicy` to `fn
asset_usage(&self) -> RenderAssetUsages`.
* Change any references to `cpu_persistent_access`
(`RenderAssetPersistencePolicy`) to `asset_usage` (`RenderAssetUsage`).
This applies to `Image`, `Mesh`, and a few other types.
# Objective
- Fixes#11569
## Solution
- Add new methods to the Ext Trait
---
## Changelog
### Added
- Added new methods to the trait `AppGizmoBuilder`
---------
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
# Objective
- Implement an arc3d API for gizmos
- Solves #11536
## Solution
### `arc_3d`
- The current `arc3d` method on gizmos only takes an angle
- It draws an "standard arc" by default, this is an arc starting at
`Vec3::X`, in the XZ plane, in counter clockwise direction with a normal
that is facing up
- The "standard arc" can be customized with the usual gizmo builder
pattern. This way you'll be able to draw arbitrary arcs
### `short/long_arc_3d_between`
- Given `center`, `from`, `to` draws an arc between `from` and `to`
---
## Changelog
> This section is optional. If this was a trivial fix, or has no
externally-visible impact, you can delete this section.
- Added: `Gizmos::arc3d(&mut self, angle)` method
- Added: `Gizmos::long_arc_3d_between(&mut self, center, from, to)`
method
- Added: `Gizmos::short_arc_3d_between(&mut self, center, from, to)`
method
---
This PR factors out an orthogonal part of another PR as mentioned in
[this
comment](https://github.com/bevyengine/bevy/pull/11072#issuecomment-1883859573)
# Objective
Keep core dependencies up to date.
## Solution
Update the dependencies.
wgpu 0.19 only supports raw-window-handle (rwh) 0.6, so bumping that was
included in this.
The rwh 0.6 version bump is just the simplest way of doing it. There
might be a way we can take advantage of wgpu's new safe surface creation
api, but I'm not familiar enough with bevy's window management to
untangle it and my attempt ended up being a mess of lifetimes and rustc
complaining about missing trait impls (that were implemented). Thanks to
@MiniaczQ for the (much simpler) rwh 0.6 version bump code.
Unblocks https://github.com/bevyengine/bevy/pull/9172 and
https://github.com/bevyengine/bevy/pull/10812
~~This might be blocked on cpal and oboe updating their ndk versions to
0.8, as they both currently target ndk 0.7 which uses rwh 0.5.2~~ Tested
on android, and everything seems to work correctly (audio properly stops
when minimized, and plays when re-focusing the app).
---
## Changelog
- `wgpu` has been updated to 0.19! The long awaited arcanization has
been merged (for more info, see
https://gfx-rs.github.io/2023/11/24/arcanization.html), and Vulkan
should now be working again on Intel GPUs.
- Targeting WebGPU now requires that you add the new `webgpu` feature
(setting the `RUSTFLAGS` environment variable to
`--cfg=web_sys_unstable_apis` is still required). This feature currently
overrides the `webgl2` feature if you have both enabled (the `webgl2`
feature is enabled by default), so it is not recommended to add it as a
default feature to libraries without putting it behind a flag that
allows library users to opt out of it! In the future we plan on
supporting wasm binaries that can target both webgl2 and webgpu now that
wgpu added support for doing so (see
https://github.com/bevyengine/bevy/issues/11505).
- `raw-window-handle` has been updated to version 0.6.
## Migration Guide
- `bevy_render::instance_index::get_instance_index()` has been removed
as the webgl2 workaround is no longer required as it was fixed upstream
in wgpu. The `BASE_INSTANCE_WORKAROUND` shaderdef has also been removed.
- WebGPU now requires the new `webgpu` feature to be enabled. The
`webgpu` feature currently overrides the `webgl2` feature so you no
longer need to disable all default features and re-add them all when
targeting `webgpu`, but binaries built with both the `webgpu` and
`webgl2` features will only target the webgpu backend, and will only
work on browsers that support WebGPU.
- Places where you conditionally compiled things for webgl2 need to be
updated because of this change, eg:
- `#[cfg(any(not(feature = "webgl"), not(target_arch = "wasm32")))]`
becomes `#[cfg(any(not(feature = "webgl") ,not(target_arch = "wasm32"),
feature = "webgpu"))]`
- `#[cfg(all(feature = "webgl", target_arch = "wasm32"))]` becomes
`#[cfg(all(feature = "webgl", target_arch = "wasm32", not(feature =
"webgpu")))]`
- `if cfg!(all(feature = "webgl", target_arch = "wasm32"))` becomes `if
cfg!(all(feature = "webgl", target_arch = "wasm32", not(feature =
"webgpu")))`
- `create_texture_with_data` now also takes a `TextureDataOrder`. You
can probably just set this to `TextureDataOrder::default()`
- `TextureFormat`'s `block_size` has been renamed to `block_copy_size`
- See the `wgpu` changelog for anything I might've missed:
https://github.com/gfx-rs/wgpu/blob/trunk/CHANGELOG.md
---------
Co-authored-by: François <mockersf@gmail.com>
# Objective
> Can anyone explain to me the reasoning of renaming all the types named
Query to Data. I'm talking about this PR
https://github.com/bevyengine/bevy/pull/10779 It doesn't make sense to
me that a bunch of types that are used to run queries aren't named Query
anymore. Like ViewQuery on the ViewNode is the type of the Query. I
don't really understand the point of the rename, it just seems like it
hides the fact that a query will run based on those types.
[@IceSentry](https://discord.com/channels/691052431525675048/692572690833473578/1184946251431694387)
## Solution
Revert several renames in #10779.
## Changelog
- `ViewNode::ViewData` is now `ViewNode::ViewQuery` again.
## Migration Guide
- This PR amends the migration guide in
https://github.com/bevyengine/bevy/pull/10779
---------
Co-authored-by: atlas dostal <rodol@rivalrebels.com>
# Objective
Fix weird visuals when drawing a gizmo with a non-normed normal.
Fixes#11401
## Solution
Just normalize right before we draw. Could do it when constructing the
builder but that seems less consistent.
## Changelog
- gizmos.circle normal is now a Direction3d instead of a Vec3.
## Migration Guide
- Pass a Direction3d for gizmos.circle normal, eg.
`Direction3d::new(vec).unwrap_or(default)` or potentially
`Direction3d::new_unchecked(vec)` if you know your vec is definitely
normalized.
# Objective
After the Gizmos changes, `App::init_gizmos_group` turned into a
important function that for sure mustn't panic. The problem is: the
actual implementation causes a panic if somehow the code is runned
before `GizmoPlugin` was added to the App
- The error occurs here for example:
```rust
fn main() {
App::new()
.init_gizmo_group::<MyGizmoConfig>()
.add_plugins(DefaultPlugins)
.run();
}
#[derive(Default, Reflect, GizmoConfigGroup)]
struct MyGizmoConfig;
```
## Solution
- Instead of panicking when getting `GizmoConfigStore`, insert the store
in `App::init_gizmos_group` if needed
---
## Changelog
### Changed
- Changed App::init_gizmos_group to insert the resource if it don't
exist
### Removed
- Removed explicit init of `GizmoConfigStore`
---------
Co-authored-by: François <mockersf@gmail.com>
# Objective
This PR aims to implement multiple configs for gizmos as discussed in
#9187.
## Solution
Configs for the new `GizmoConfigGroup`s are stored in a
`GizmoConfigStore` resource and can be accesses using a type based key
or iterated over. This type based key doubles as a standardized location
where plugin authors can put their own configuration not covered by the
standard `GizmoConfig` struct. For example the `AabbGizmoGroup` has a
default color and toggle to show all AABBs. New configs can be
registered using `app.init_gizmo_group::<T>()` during startup.
When requesting the `Gizmos<T>` system parameter the generic type
determines which config is used. The config structs are available
through the `Gizmos` system parameter allowing for easy access while
drawing your gizmos.
Internally, resources and systems used for rendering (up to an including
the extract system) are generic over the type based key and inserted on
registering a new config.
## Alternatives
The configs could be stored as components on entities with markers which
would make better use of the ECS. I also implemented this approach
([here](https://github.com/jeliag/bevy/tree/gizmo-multiconf-comp)) and
believe that the ergonomic benefits of a central config store outweigh
the decreased use of the ECS.
## Unsafe Code
Implementing system parameter by hand is unsafe but seems to be required
to access the config store once and not on every gizmo draw function
call. This is critical for performance. ~Is there a better way to do
this?~
## Future Work
New gizmos (such as #10038, and ideas from #9400) will require custom
configuration structs. Should there be a new custom config for every
gizmo type, or should we group them together in a common configuration?
(for example `EditorGizmoConfig`, or something more fine-grained)
## Changelog
- Added `GizmoConfigStore` resource and `GizmoConfigGroup` trait
- Added `init_gizmo_group` to `App`
- Added early returns to gizmo drawing increasing performance when
gizmos are disabled
- Changed `GizmoConfig` and aabb gizmos to use new `GizmoConfigStore`
- Changed `Gizmos` system parameter to use type based key to retrieve
config
- Changed resources and systems used for gizmo rendering to be generic
over type based key
- Changed examples (3d_gizmos, 2d_gizmos) to showcase new API
## Migration Guide
- `GizmoConfig` is no longer a resource and has to be accessed through
`GizmoConfigStore` resource. The default config group is
`DefaultGizmoGroup`, but consider using your own custom config group if
applicable.
---------
Co-authored-by: Nicola Papale <nicopap@users.noreply.github.com>
# Objective
- `bevy_gizmos` cannot work if both `bevy_sprite` and `bevy_pbr` are
disabled.
- It silently fails to render, making it difficult to debug.
- Fixes#10984
## Solution
- Log an error message when `GizmoPlugin` is registered.
## Alternatives
I chose to log an error message, since it seemed the least intrusive of
potential solutions. Some alternatives include:
- Choosing one dependency as the default, neglecting the other. (#11035)
- Raising a compile error when neither dependency is enabled. ([See my
original
comment](https://github.com/bevyengine/bevy/issues/10984#issuecomment-1873420426))
- Raising a compile warning using a macro hack. ([Pre-RFC - Add
compile_warning!
macro](https://internals.rust-lang.org/t/pre-rfc-add-compile-warning-macro/9370/7?u=bd103))
- Logging a warning instead of an error.
- _This might be the better option. Let me know if I should change it._
---
## Changelog
- `bevy_gizmos` will now log an error if neither `bevy_pbr` nor
`bevy_sprite` are enabled.
# Objective
Fixes Gizmos crash due to the persistence policy being set to `Unload`
## Solution
Change it to `Keep`
Co-authored-by: rqg <ranqingguo318@gmail.com>
# Objective
- No point in keeping Meshes/Images in RAM once they're going to be sent
to the GPU, and kept in VRAM. This saves a _significant_ amount of
memory (several GBs) on scenes like bistro.
- References
- https://github.com/bevyengine/bevy/pull/1782
- https://github.com/bevyengine/bevy/pull/8624
## Solution
- Augment RenderAsset with the capability to unload the underlying asset
after extracting to the render world.
- Mesh/Image now have a cpu_persistent_access field. If this field is
RenderAssetPersistencePolicy::Unload, the asset will be unloaded from
Assets<T>.
- A new AssetEvent is sent upon dropping the last strong handle for the
asset, which signals to the RenderAsset to remove the GPU version of the
asset.
---
## Changelog
- Added `AssetEvent::NoLongerUsed` and
`AssetEvent::is_no_longer_used()`. This event is sent when the last
strong handle of an asset is dropped.
- Rewrote the API for `RenderAsset` to allow for unloading the asset
data from the CPU.
- Added `RenderAssetPersistencePolicy`.
- Added `Mesh::cpu_persistent_access` for memory savings when the asset
is not needed except for on the GPU.
- Added `Image::cpu_persistent_access` for memory savings when the asset
is not needed except for on the GPU.
- Added `ImageLoaderSettings::cpu_persistent_access`.
- Added `ExrTextureLoaderSettings`.
- Added `HdrTextureLoaderSettings`.
## Migration Guide
- Asset loaders (GLTF, etc) now load meshes and textures without
`cpu_persistent_access`. These assets will be removed from
`Assets<Mesh>` and `Assets<Image>` once `RenderAssets<Mesh>` and
`RenderAssets<Image>` contain the GPU versions of these assets, in order
to reduce memory usage. If you require access to the asset data from the
CPU in future frames after the GLTF asset has been loaded, modify all
dependent `Mesh` and `Image` assets and set `cpu_persistent_access` to
`RenderAssetPersistencePolicy::Keep`.
- `Mesh` now requires a new `cpu_persistent_access` field. Set it to
`RenderAssetPersistencePolicy::Keep` to mimic the previous behavior.
- `Image` now requires a new `cpu_persistent_access` field. Set it to
`RenderAssetPersistencePolicy::Keep` to mimic the previous behavior.
- `MorphTargetImage::new()` now requires a new `cpu_persistent_access`
parameter. Set it to `RenderAssetPersistencePolicy::Keep` to mimic the
previous behavior.
- `DynamicTextureAtlasBuilder::add_texture()` now requires that the
`TextureAtlas` you pass has an `Image` with `cpu_persistent_access:
RenderAssetPersistencePolicy::Keep`. Ensure you construct the image
properly for the texture atlas.
- The `RenderAsset` trait has significantly changed, and requires
adapting your existing implementations.
- The trait now requires `Clone`.
- The `ExtractedAsset` associated type has been removed (the type itself
is now extracted).
- The signature of `prepare_asset()` is slightly different
- A new `persistence_policy()` method is now required (return
RenderAssetPersistencePolicy::Unload to match the previous behavior).
- Match on the new `NoLongerUsed` variant for exhaustive matches of
`AssetEvent`.
# Objective
- Make the implementation order consistent between all sources to fit
the order in the trait.
## Solution
- Change the implementation order.
# Objective
- Follow up to #9694
## Solution
- Same api as #9694 but adapted for `BindGroupLayoutEntry`
- Use the same `ShaderStages` visibilty for all entries by default
- Add `BindingType` helper function that mirror the wgsl equivalent and
that make writing layouts much simpler.
Before:
```rust
let layout = render_device.create_bind_group_layout(&BindGroupLayoutDescriptor {
label: Some("post_process_bind_group_layout"),
entries: &[
BindGroupLayoutEntry {
binding: 0,
visibility: ShaderStages::FRAGMENT,
ty: BindingType::Texture {
sample_type: TextureSampleType::Float { filterable: true },
view_dimension: TextureViewDimension::D2,
multisampled: false,
},
count: None,
},
BindGroupLayoutEntry {
binding: 1,
visibility: ShaderStages::FRAGMENT,
ty: BindingType::Sampler(SamplerBindingType::Filtering),
count: None,
},
BindGroupLayoutEntry {
binding: 2,
visibility: ShaderStages::FRAGMENT,
ty: BindingType::Buffer {
ty: bevy::render::render_resource::BufferBindingType::Uniform,
has_dynamic_offset: false,
min_binding_size: Some(PostProcessSettings::min_size()),
},
count: None,
},
],
});
```
After:
```rust
let layout = render_device.create_bind_group_layout(
"post_process_bind_group_layout"),
&BindGroupLayoutEntries::sequential(
ShaderStages::FRAGMENT,
(
texture_2d_f32(),
sampler(SamplerBindingType::Filtering),
uniform_buffer(false, Some(PostProcessSettings::min_size())),
),
),
);
```
Here's a more extreme example in bevy_solari:
86dab7f5da
---
## Changelog
- Added `BindGroupLayoutEntries` and all `BindingType` helper functions.
## Migration Guide
`RenderDevice::create_bind_group_layout()` doesn't take a
`BindGroupLayoutDescriptor` anymore. You need to provide the parameters
separately
```rust
// 0.12
let layout = render_device.create_bind_group_layout(&BindGroupLayoutDescriptor {
label: Some("post_process_bind_group_layout"),
entries: &[
BindGroupLayoutEntry {
// ...
},
],
});
// 0.13
let layout = render_device.create_bind_group_layout(
"post_process_bind_group_layout",
&[
BindGroupLayoutEntry {
// ...
},
],
);
```
## TODO
- [x] implement a `Dynamic` variant
- [x] update the `RenderDevice::create_bind_group_layout()` api to match
the one from `RenderDevice::creat_bind_group()`
- [x] docs
## Objective
- Split different types of gizmos into their own files
## Solution
- Move `arc_2d` and `Arc2dBuilder` into `arcs.rs`
- turns out there's no 3d arc function! I'll add one Soon(TM) in another
MR
## Changelog
- Changed
- moved `gizmos::Arc2dBuilder` to `gizmos::arcs::Arc2dBuilder`
## Migration Guide
- `gizmos::Arc2dBuilder` -> `gizmos::arcs::Arc2dBuilder`
## Objective
- Give all the intuitive groups of gizmos their own file
- don't be a breaking change
- don't change Gizmos interface
- eventually do arcs too
- future types of gizmos should be in their own files
- see also https://github.com/bevyengine/bevy/issues/9400
## Solution
- Moved `gizmos.circle`, `gizmos.2d_circle`, and assorted helpers into
`circles.rs`
- Can also do arcs in this MR if y'all want; just figured I should do
one thing at a time.
## Changelog
- Changed
- `gizmos::CircleBuilder` moved to `gizmos::circles::Circle2dBuilder`
- `gizmos::Circle2dBuilder` moved to `gizmos::circles::Circle2dBuilder`
## Migration Guide
- change `gizmos::CircleBuilder` to `gizmos::circles::Circle2dBuilder`
- change `gizmos::Circle2dBuilder` to `gizmos::circles::Circle2dBuilder`
---------
Co-authored-by: François <mockersf@gmail.com>
# Objective
- Fix adding `#![allow(clippy::type_complexity)]` everywhere. like #9796
## Solution
- Use the new [lints] table that will land in 1.74
(https://doc.rust-lang.org/nightly/cargo/reference/unstable.html#lints)
- inherit lint to the workspace, crates and examples.
```
[lints]
workspace = true
```
## Changelog
- Bump rust version to 1.74
- Enable lints table for the workspace
```toml
[workspace.lints.clippy]
type_complexity = "allow"
```
- Allow type complexity for all crates and examples
```toml
[lints]
workspace = true
```
---------
Co-authored-by: Martín Maita <47983254+mnmaita@users.noreply.github.com>
## Objective
- Add an arrow gizmo as suggested by #9400
## Solution
(excuse my Protomen music)
https://github.com/bevyengine/bevy/assets/14184826/192adf24-079f-4a4b-a17b-091e892974ec
Wasn't horribly hard when i remembered i can change coordinate systems
whenever I want. Gave them four tips (as suggested by @alice-i-cecile in
discord) instead of trying to decide what direction the tips should
point.
Made the tip length default to 1/10 of the arrow's length, which looked
good enough to me. Hard-coded the angle from the body to the tips to 45
degrees.
## Still TODO
- [x] actual doc comments
- [x] doctests
- [x] `ArrowBuilder.with_tip_length()`
---
## Changelog
- Added `gizmos.arrow()` and `gizmos.arrow_2d()`
- Added arrows to `2d_gizmos` and `3d_gizmos` examples
## Migration Guide
N/A
---------
Co-authored-by: Nicola Papale <nicopap@users.noreply.github.com>
Fix a precision issue with in the manual near-clipping function.
This only affected lines that span large distances (starting at 100_000~
units) in my testing.
Fixes#10403
Preparing next release
This PR has been auto-generated
---------
Co-authored-by: Bevy Auto Releaser <41898282+github-actions[bot]@users.noreply.github.com>
Co-authored-by: François <mockersf@gmail.com>
# Objective
Simplify bind group creation code. alternative to (and based on) #9476
## Solution
- Add a `BindGroupEntries` struct that can transparently be used where
`&[BindGroupEntry<'b>]` is required in BindGroupDescriptors.
Allows constructing the descriptor's entries as:
```rust
render_device.create_bind_group(
"my_bind_group",
&my_layout,
&BindGroupEntries::with_indexes((
(2, &my_sampler),
(3, my_uniform),
)),
);
```
instead of
```rust
render_device.create_bind_group(
"my_bind_group",
&my_layout,
&[
BindGroupEntry {
binding: 2,
resource: BindingResource::Sampler(&my_sampler),
},
BindGroupEntry {
binding: 3,
resource: my_uniform,
},
],
);
```
or
```rust
render_device.create_bind_group(
"my_bind_group",
&my_layout,
&BindGroupEntries::sequential((&my_sampler, my_uniform)),
);
```
instead of
```rust
render_device.create_bind_group(
"my_bind_group",
&my_layout,
&[
BindGroupEntry {
binding: 0,
resource: BindingResource::Sampler(&my_sampler),
},
BindGroupEntry {
binding: 1,
resource: my_uniform,
},
],
);
```
the structs has no user facing macros, is tuple-type-based so stack
allocated, and has no noticeable impact on compile time.
- Also adds a `DynamicBindGroupEntries` struct with a similar api that
uses a `Vec` under the hood and allows extending the entries.
- Modifies `RenderDevice::create_bind_group` to take separate arguments
`label`, `layout` and `entries` instead of a `BindGroupDescriptor`
struct. The struct can't be stored due to the internal references, and
with only 3 members arguably does not add enough context to justify
itself.
- Modify the codebase to use the new api and the `BindGroupEntries` /
`DynamicBindGroupEntries` structs where appropriate (whenever the
entries slice contains more than 1 member).
## Migration Guide
- Calls to `RenderDevice::create_bind_group({BindGroupDescriptor {
label, layout, entries })` must be amended to
`RenderDevice::create_bind_group(label, layout, entries)`.
- If `label`s have been specified as `"bind_group_name".into()`, they
need to change to just `"bind_group_name"`. `Some("bind_group_name")`
and `None` will still work, but `Some("bind_group_name")` can optionally
be simplified to just `"bind_group_name"`.
---------
Co-authored-by: IceSentry <IceSentry@users.noreply.github.com>
# Objective
- bump naga_oil to 0.10
- update shader imports to use rusty syntax
## Migration Guide
naga_oil 0.10 reworks the import mechanism to support more syntax to
make it more rusty, and test for item use before importing to determine
which imports are modules and which are items, which allows:
- use rust-style imports
```
#import bevy_pbr::{
pbr_functions::{alpha_discard as discard, apply_pbr_lighting},
mesh_bindings,
}
```
- import partial paths:
```
#import part::of::path
...
path::remainder::function();
```
which will call to `part::of::path::remainder::function`
- use fully qualified paths without importing:
```
// #import bevy_pbr::pbr_functions
bevy_pbr::pbr_functions::pbr()
```
- use imported items without qualifying
```
#import bevy_pbr::pbr_functions::pbr
// for backwards compatibility the old style is still supported:
// #import bevy_pbr::pbr_functions pbr
...
pbr()
```
- allows most imported items to end with `_` and numbers (naga_oil#30).
still doesn't allow struct members to end with `_` or numbers but it's
progress.
- the vast majority of existing shader code will work without changes,
but will emit "deprecated" warnings for old-style imports. these can be
suppressed with the `allow-deprecated` feature.
- partly breaks overrides (as far as i'm aware nobody uses these yet) -
now overrides will only be applied if the overriding module is added as
an additional import in the arguments to `Composer::make_naga_module` or
`Composer::add_composable_module`. this is necessary to support
determining whether imports are modules or items.
# Objective
This PR aims to make it so that we don't accidentally go over
`MAX_TEXTURE_IMAGE_UNITS` (in WebGL) or
`maxSampledTexturesPerShaderStage` (in WebGPU), giving us some extra
leeway to add more view bind group textures.
(This PR is extracted from—and unblocks—#8015)
## Solution
- We replace the existing `view_layout` and `view_layout_multisampled`
pair with an array of 32 bind group layouts, generated ahead of time;
- For now, these layouts cover all the possible combinations of:
`multisampled`, `depth_prepass`, `normal_prepass`,
`motion_vector_prepass` and `deferred_prepass`:
- In the future, as @JMS55 pointed out, we can likely take out
`motion_vector_prepass` and `deferred_prepass`, as these are not really
needed for the mesh pipeline and can use separate pipelines. This would
bring the possible combinations down to 8;
- We can also add more "optional" textures as they become needed,
allowing the engine to scale to a wider variety of use cases in lower
end/web environments (e.g. some apps might just want normal and depth
prepasses, others might only want light probes), while still keeping a
high ceiling for high end native environments where more textures are
supported.
- While preallocating bind group layouts is relatively cheap, the number
of combinations grows exponentially, so we should likely limit ourselves
to something like at most 256–1024 total layouts until we find a better
solution (like generating them lazily)
- To make this mechanism a little bit more explicit/discoverable, so
that compatibility with WebGPU/WebGL is not broken by accident, we add a
`MESH_PIPELINE_VIEW_LAYOUT_SAFE_MAX_TEXTURES` const and warn whenever
the number of textures in the layout crosses it.
- The warning is gated by `#[cfg(debug_assertions)]` and not issued in
release builds;
- We're counting the actual textures in the bind group layout instead of
using some roundabout metric so it should be accurate;
- Right now `MESH_PIPELINE_VIEW_LAYOUT_SAFE_MAX_TEXTURES` is set to 10
in order to leave 6 textures free for other groups;
- Currently there's no combination that would cause us to go over the
limit, but that will change once #8015 lands.
---
## Changelog
- `MeshPipeline` view bind group layouts now vary based on the current
multisampling and prepass states, saving a couple of texture binding
entries when prepasses are not in use.
## Migration Guide
- `MeshPipeline::view_layout` and
`MeshPipeline::view_layout_multisampled` have been replaced with a
private array to accomodate for variable view bind group layouts. To
obtain a view bind group layout for the current pipeline state, use the
new `MeshPipeline::get_view_layout()` or
`MeshPipeline::get_view_layout_from_key()` methods.
# Objective
- Add a [Deferred
Renderer](https://en.wikipedia.org/wiki/Deferred_shading) to Bevy.
- This allows subsequent passes to access per pixel material information
before/during shading.
- Accessing this per pixel material information is needed for some
features, like GI. It also makes other features (ex. Decals) simpler to
implement and/or improves their capability. There are multiple
approaches to accomplishing this. The deferred shading approach works
well given the limitations of WebGPU and WebGL2.
Motivation: [I'm working on a GI solution for
Bevy](https://youtu.be/eH1AkL-mwhI)
# Solution
- The deferred renderer is implemented with a prepass and a deferred
lighting pass.
- The prepass renders opaque objects into the Gbuffer attachment
(`Rgba32Uint`). The PBR shader generates a `PbrInput` in mostly the same
way as the forward implementation and then [packs it into the
Gbuffer](ec1465559f/crates/bevy_pbr/src/render/pbr.wgsl (L168)).
- The deferred lighting pass unpacks the `PbrInput` and [feeds it into
the pbr()
function](ec1465559f/crates/bevy_pbr/src/deferred/deferred_lighting.wgsl (L65)),
then outputs the shaded color data.
- There is now a resource
[DefaultOpaqueRendererMethod](ec1465559f/crates/bevy_pbr/src/material.rs (L599))
that can be used to set the default render method for opaque materials.
If materials return `None` from
[opaque_render_method()](ec1465559f/crates/bevy_pbr/src/material.rs (L131))
the `DefaultOpaqueRendererMethod` will be used. Otherwise, custom
materials can also explicitly choose to only support Deferred or Forward
by returning the respective
[OpaqueRendererMethod](ec1465559f/crates/bevy_pbr/src/material.rs (L603))
- Deferred materials can be used seamlessly along with both opaque and
transparent forward rendered materials in the same scene. The [deferred
rendering
example](https://github.com/DGriffin91/bevy/blob/deferred/examples/3d/deferred_rendering.rs)
does this.
- The deferred renderer does not support MSAA. If any deferred materials
are used, MSAA must be disabled. Both TAA and FXAA are supported.
- Deferred rendering supports WebGL2/WebGPU.
## Custom deferred materials
- Custom materials can support both deferred and forward at the same
time. The
[StandardMaterial](ec1465559f/crates/bevy_pbr/src/render/pbr.wgsl (L166))
does this. So does [this
example](https://github.com/DGriffin91/bevy_glowy_orb_tutorial/blob/deferred/assets/shaders/glowy.wgsl#L56).
- Custom deferred materials that require PBR lighting can create a
`PbrInput`, write it to the deferred GBuffer and let it be rendered by
the `PBRDeferredLightingPlugin`.
- Custom deferred materials that require custom lighting have two
options:
1. Use the base_color channel of the `PbrInput` combined with the
`STANDARD_MATERIAL_FLAGS_UNLIT_BIT` flag.
[Example.](https://github.com/DGriffin91/bevy_glowy_orb_tutorial/blob/deferred/assets/shaders/glowy.wgsl#L56)
(If the unlit bit is set, the base_color is stored as RGB9E5 for extra
precision)
2. A Custom Deferred Lighting pass can be created, either overriding the
default, or running in addition. The a depth buffer is used to limit
rendering to only the required fragments for each deferred lighting
pass. Materials can set their respective depth id via the
[deferred_lighting_pass_id](b79182d2a3/crates/bevy_pbr/src/prepass/prepass_io.wgsl (L95))
attachment. The custom deferred lighting pass plugin can then set [its
corresponding
depth](ec1465559f/crates/bevy_pbr/src/deferred/deferred_lighting.wgsl (L37)).
Then with the lighting pass using
[CompareFunction::Equal](ec1465559f/crates/bevy_pbr/src/deferred/mod.rs (L335)),
only the fragments with a depth that equal the corresponding depth
written in the material will be rendered.
Custom deferred lighting plugins can also be created to render the
StandardMaterial. The default deferred lighting plugin can be bypassed
with `DefaultPlugins.set(PBRDeferredLightingPlugin { bypass: true })`
---------
Co-authored-by: nickrart <nickolas.g.russell@gmail.com>
# Objective
- Updates for rust 1.73
## Solution
- new doc check for `redundant_explicit_links`
- updated to text for compile fail tests
---
## Changelog
- updates for rust 1.73
