This expands upon https://github.com/bevyengine/bevy/pull/11134.
I found myself needing `tonemapping_pipeline_key` for some custom 2d
draw functions. #11134 exported the 3d version of
`tonemapping_pipeline_key` and this PR exports the 2d version. I also
made `alpha_mode_pipeline_key` public for good measure.
# Objective
When panic handler prints to stdout instead of stderr, I've observed two
outcomes with this PR test #11169:
- Sometimes output is mixed up, so it is not clear where one record ends
and another stards
- Sometimes output is lost
## Solution
Print to stderr.
## Changelog
- Panic handler in `LogPlugin` writes to stderr instead of stdin.
# Objective
`SystemName` might be useful in systems which accept `&mut World`.
## Solution
- `impl ExclusiveSystemParam for SystemName`
- move `SystemName` into a separate file, because it no longer belongs
to a file which defines `SystemParam`
- add a test for new impl, and for existing impl
## Changelog
- `impl ExclusiveSystemParam for SystemName`
Turns out whenever a normal prepass was active (which includes whenever
you use SSAO) we were attempting to read the normals from the prepass
for the specular transmissive material. Since transmissive materials
don't participate in the prepass (unlike opaque materials) we were
reading the normals from “behind” the mesh, producing really weird
visual results.
# Objective
- Fixes#11112.
## Solution
- We introduce a new `READS_VIEW_TRANSMISSION_TEXTURE` mesh pipeline
key;
- We set it whenever the material properties has the
`reads_view_transmission_texture` flag set; (i.e. the material is
transmissive)
- If this key is set we prevent the reading of normals from the prepass,
by not setting the `LOAD_PREPASS_NORMALS` shader def.
---
## Changelog
### Fixed
- Specular transmissive materials no longer attempt to erroneously load
prepass normals, and now work correctly even with the normal prepass
active (e.g. when using SSAO)
# Objective
- Refactor collide code and add tests.
## Solution
- Rebase the changes made in #4485.
Co-authored-by: Eduardo Canellas de Oliveira <eduardo.canellas@bemobi.com>
# Objective
There are a lot of doctests that are `ignore`d for no documented reason.
And that should be fixed.
## Solution
I searched the bevy repo with the regex ` ```[a-z,]*ignore ` in order to
find all `ignore`d doctests. For each one of the `ignore`d doctests, I
did the following steps:
1. Attempt to remove the `ignored` attribute while still passing the
test. I did this by adding hidden dummy structs and imports.
2. If step 1 doesn't work, attempt to replace the `ignored` attribute
with the `no_run` attribute while still passing the test.
3. If step 2 doesn't work, keep the `ignored` attribute but add
documentation for why the `ignored` attribute was added.
---------
Co-authored-by: François <mockersf@gmail.com>
# Objective
Fixes#11050
Rename ArchetypeEntity::entity to ArchetypeEntity::id to be consistent
with `EntityWorldMut`, `EntityMut` and `EntityRef`.
## Migration Guide
The method `ArchetypeEntity::entity` has been renamed to
`ArchetypeEntity::id`
# Objective
- There is an warning about non snake case on system_param.rs generated
by a macro
## Solution
- Allow non snake case on the function at fault
# Objective
Implement `ExclusiveSystemParam` for `PhantomData`.
For the same reason `SystemParam` impl exists: to simplify writing
generic code.
786abbf3f5/crates/bevy_ecs/src/system/system_param.rs (L1557)
Also for consistency.
## Solution
`impl ExclusiveSystemParam for PhantomData`.
## Changelog
Added: PhantomData<T> now implements ExclusiveSystemParam.
# Objective
Mostly for consistency.
## Solution
```rust
impl ExclusiveSystemParam for WorldId
```
- Also add a test for `SystemParam for WorldId`
## Changelog
Added: Worldd now implements ExclusiveSystemParam.
# Objective
- Custom render passes, or future passes in the engine (such as
https://github.com/bevyengine/bevy/pull/10164) need a better way to know
and indicate to the core passes whether the view color/depth/prepass
attachments have been cleared or not yet this frame, to know if they
should clear it themselves or load it.
## Solution
- For all render targets (depth textures, shadow textures, prepass
textures, main textures) use an atomic bool to track whether or not each
texture has been cleared this frame. Abstracted away in the new
ColorAttachment and DepthAttachment wrappers.
---
## Changelog
- Changed `ViewTarget::get_color_attachment()`, removed arguments.
- Changed `ViewTarget::get_unsampled_color_attachment()`, removed
arguments.
- Removed `Camera3d::clear_color`.
- Removed `Camera2d::clear_color`.
- Added `Camera::clear_color`.
- Added `ExtractedCamera::clear_color`.
- Added `ColorAttachment` and `DepthAttachment` wrappers.
- Moved `ClearColor` and `ClearColorConfig` from
`bevy::core_pipeline::clear_color` to `bevy::render::camera`.
- Core render passes now track when a texture is first bound as an
attachment in order to decide whether to clear or load it.
## Migration Guide
- Remove arguments to `ViewTarget::get_color_attachment()` and
`ViewTarget::get_unsampled_color_attachment()`.
- Configure clear color on `Camera` instead of on `Camera3d` and
`Camera2d`.
- Moved `ClearColor` and `ClearColorConfig` from
`bevy::core_pipeline::clear_color` to `bevy::render::camera`.
- `ViewDepthTexture` must now be created via the `new()` method
---------
Co-authored-by: vero <email@atlasdostal.com>
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
# Objective
Fix ci hang, so we can merge pr's again.
## Solution
- switch ppa action to use mesa stable versions
https://launchpad.net/~kisak/+archive/ubuntu/turtle
- use commit from #11123
---------
Co-authored-by: Stepan Koltsov <stepan.koltsov@gmail.com>
# Objective
- Provides an alternate solution to the one implemented in #10791
without breaking changes.
## Solution
- Changes the bounds of macro-generated `TypePath` implementations to
universally ignore the types of fields, rather than use the same bounds
as other implementations. I think this is a more holistic solution than
#10791 because it totally erases the finicky bounds we currently
generate, helping to untangle the reflection trait system.
# Objective
- Make the implementation order consistent between all sources to fit
the order in the trait.
## Solution
- Change the implementation order.
Matches versioning & features from other Cargo.toml files in the
project.
# Objective
Resolves#10932
## Solution
Added smallvec to the bevy_utils cargo.toml and added a line to
re-export the crate. Target version and features set to match what's
used in the other bevy crates.
# Objective
Register and Serialize `Camera3dDepthTextureUsage` and
`ScreenSpaceTransmissionQuality`.
Fixes: #11036
## Solution
Added the relevant derives for reflection and serialization and type
registrations.
# Objective
Outlines are drawn for UI nodes with `Display::None` set and their
descendants. They should not be visible.
## Solution
Make all Nodes with `Display::None` inherit an empty clipping rect,
ensuring that the outlines are not visible.
Fixes#10940
---
## Changelog
* In `update_clipping_system` if a node has `Display::None` set, clip
the entire node and all its descendants by replacing the inherited clip
with a default rect (which is empty)
# Objective
The documentation for the `States` trait contains an error! There is a
single colon missing from `OnExit<T:Variant>`.
## Solution
Replace `OnExit<T:Variant>` with `OnExit<T::Variant>`. (Notice the added
colon.)
---
## Changelog
### Added
- Added missing colon in `States` documentation.
---
Bevy community, you may now rest easy.
The error conditions were not documented, this requires the user to
inspect the source code to know when to expect a `None`.
Error conditions should always be documented, so we document them.
---------
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
Improves #11052
# Changelog
- Remove `Window::fit_canvas_to_parent`, as its resizing on wasm now
respects its CSS configuration.
## Migration Guide
- Remove uses of `Window::fit_canvas_to_parent` in favor of CSS
properties, for example:
```css
canvas {
width: 100%;
height: 100%;
}
```
# Objective
- After #10336, some gltf files fail to load (examples
custom_gltf_vertex_attribute, gltf_skinned_mesh, ...)
- Fix them
## Solution
- Allow padding in base 64 decoder
# Objective
Fix#10731.
## Solution
Rename `App::add_state<T>(&mut self)` to `init_state`, and add
`App::insert_state<T>(&mut self, state: T)`. I decided on these names
because they are more similar to `init_resource` and `insert_resource`.
I also removed the `States` trait's requirement for `Default`. Instead,
`init_state` requires `FromWorld`.
---
## Changelog
- Renamed `App::add_state` to `init_state`.
- Added `App::insert_state`.
- Removed the `States` trait's requirement for `Default`.
## Migration Guide
- Renamed `App::add_state` to `init_state`.
# Objective
- Update winit dependency to 0.29
## Changelog
### KeyCode changes
- Removed `ScanCode`, as it was [replaced by
KeyCode](https://github.com/rust-windowing/winit/blob/master/CHANGELOG.md#0292).
- `ReceivedCharacter.char` is now a `SmolStr`, [relevant
doc](https://docs.rs/winit/latest/winit/event/struct.KeyEvent.html#structfield.text).
- Changed most `KeyCode` values, and added more.
KeyCode has changed meaning. With this PR, it refers to physical
position on keyboard rather than the printed letter on keyboard keys.
In practice this means:
- On QWERTY keyboard layouts, nothing changes
- On any other keyboard layout, `KeyCode` no longer reflects the label
on key.
- This is "good". In bevy 0.12, when you used WASD for movement, users
with non-QWERTY keyboards couldn't play your game! This was especially
bad for non-latin keyboards. Now, WASD represents the physical keys. A
French player will press the ZQSD keys, which are near each other,
Kyrgyz players will use "Цфыв".
- This is "bad" as well. You can't know in advance what the label of the
key for input is. Your UI says "press WASD to move", even if in reality,
they should be pressing "ZQSD" or "Цфыв". You also no longer can use
`KeyCode` for text inputs. In any case, it was a pretty bad API for text
input. You should use `ReceivedCharacter` now instead.
### Other changes
- Use `web-time` rather than `instant` crate.
(https://github.com/rust-windowing/winit/pull/2836)
- winit did split `run_return` in `run_onDemand` and `pump_events`, I
did the same change in bevy_winit and used `pump_events`.
- Removed `return_from_run` from `WinitSettings` as `winit::run` now
returns on supported platforms.
- I left the example "return_after_run" as I think it's still useful.
- This winit change is done partly to allow to create a new window after
quitting all windows: https://github.com/emilk/egui/issues/1918 ; this
PR doesn't address.
- added `width` and `height` properties in the `canvas` from wasm
example
(https://github.com/bevyengine/bevy/pull/10702#discussion_r1420567168)
## Known regressions (important follow ups?)
- Provide an API for reacting when a specific key from current layout
was released.
- possible solutions: use winit::Key from winit::KeyEvent ; mapping
between KeyCode and Key ; or .
- We don't receive characters through alt+numpad (e.g. alt + 151 = "ù")
anymore ; reproduced on winit example "ime". maybe related to
https://github.com/rust-windowing/winit/issues/2945
- (windows) Window content doesn't refresh at all when resizing. By
reading https://github.com/rust-windowing/winit/issues/2900 ; I suspect
we should just fire a `window.request_redraw();` from `AboutToWait`, and
handle actual redrawing within `RedrawRequested`. I'm not sure how to
move all that code so I'd appreciate it to be a follow up.
- (windows) unreleased winit fix for using set_control_flow in
AboutToWait https://github.com/rust-windowing/winit/issues/3215 ; ⚠️ I'm
not sure what the implications are, but that feels bad 🤔
## Follow up
I'd like to avoid bloating this PR, here are a few follow up tasks
worthy of a separate PR, or new issue to track them once this PR is
closed, as they would either complicate reviews, or at risk of being
controversial:
- remove CanvasParentResizePlugin
(https://github.com/bevyengine/bevy/pull/10702#discussion_r1417068856)
- avoid mentionning explicitly winit in docs from bevy_window ?
- NamedKey integration on bevy_input:
https://github.com/rust-windowing/winit/pull/3143 introduced a new
NamedKey variant. I implemented it only on the converters but we'd
benefit making the same changes to bevy_input.
- Add more info in KeyboardInput
https://github.com/bevyengine/bevy/pull/10702#pullrequestreview-1748336313
- https://github.com/bevyengine/bevy/pull/9905 added a workaround on a
bug allegedly fixed by winit 0.29. We should check if it's still
necessary.
- update to raw_window_handle 0.6
- blocked by wgpu
- Rename `KeyCode` to `PhysicalKeyCode`
https://github.com/bevyengine/bevy/pull/10702#discussion_r1404595015
- remove `instant` dependency, [replaced
by](https://github.com/rust-windowing/winit/pull/2836) `web_time`), we'd
need to update to :
- fastrand >= 2.0
- [`async-executor`](https://github.com/smol-rs/async-executor) >= 1.7
- [`futures-lite`](https://github.com/smol-rs/futures-lite) >= 2.0
- Verify license, see
[discussion](https://github.com/bevyengine/bevy/pull/8745#discussion_r1402439800)
- we might be missing a short notice or description of changes made
- Consider using https://github.com/rust-windowing/cursor-icon directly
rather than vendoring it in bevy.
- investigate [this
unwrap](https://github.com/bevyengine/bevy/pull/8745#discussion_r1387044986)
(`winit_window.canvas().unwrap();`)
- Use more good things about winit's update
- https://github.com/bevyengine/bevy/pull/10689#issuecomment-1823560428
## Migration Guide
This PR should have one.
# Objective
- Update base64 requirement from 0.13.0 to 0.21.5.
- Closes#10317.
## Solution
- Bumped `base64` requirement and manually migrated code to fix a
breaking change after updating.
# Objective
`Has<T>` in some niche cases may behave in an unexpected way.
Specifically, when using `Query::get` on a `Has<T>` with a despawned
entity.
## Solution
Add precision about cases wehre `Query::get` could return an `Err`.
Use `'w` for world lifetime consistently.
When implementing system params, useful to look at how other params are
implemented. `'w` makes it clear it is world, not state.
# Objective
- Fixes#10587, where the `Aabb` component of entities with `Sprite` and
`Handle<Image>` components was not automatically updated when
`Sprite::custom_size` changed.
## Solution
- In the query for entities with `Sprite` components in
`calculate_bounds_2d`, use the `Changed` filter to detect for `Sprites`
that changed as well as sprites that do not have `Aabb` components. As
noted in the issue, this will cause the `Aabb` to be recalculated when
other fields of the `Sprite` component change, but calculating the
`Aabb` for sprites is trivial.
---
## Changelog
- Modified query for entities with `Sprite` components in
`calculate_bounds_2d`, so that entities with `Sprite` components that
changed will also have their AABB recalculated.
# Objective
- Provide way to check whether multiple inputs are pressed.
## Solution
- Add `all_pressed` method that checks if all inputs are currently being
pressed.
# Objective
- Allow checking if a resource has changed by its ComponentId
---
## Changelog
- Added `World::is_resource_changed_by_id()` and
`World::is_resource_added_by_id()`.
# Objective
Being able to do:
```rust
ev_scene_ready.read().next().unwrap();
```
Which currently isn't possible because `SceneInstanceReady` doesn't
implement `Debug`.
## Solution
Implement `Debug` for `SceneInstanceReady`.
---
## Changelog
### Added
- Implement Std traits for `SceneInstanceReady`.
# Objective
- Fix an inconsistency in the calculation of aspect ratio's.
- Fixes#10288
## Solution
- Created an intermediate `AspectRatio` struct, as suggested in the
issue. This is currently just used in any places where aspect ratio
calculations happen, to prevent doing it wrong. In my and @mamekoro 's
opinion, it would be better if this was used instead of a normal `f32`
in various places, but I didn't want to make too many changes to begin
with.
## Migration Guide
- Anywhere where you are currently expecting a f32 when getting aspect
ratios, you will now receive a `AspectRatio` struct. this still holds
the same value.
---------
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
# Objective
The definition of several `QueryState` methods use unnecessary explicit
lifetimes, which adds to visual noise.
## Solution
Elide the lifetimes.
# Objective
- bevy_sprite crate is missing docs for important types. `Sprite` being
undocumented was especially confusing for me even though it is one of
the first types I need to learn.
## Solution
- Improves the situation a little by adding some documentations.
I'm unsure about my understanding of functionality and writing. I'm
happy to be pointed out any mistakes.
---------
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
Co-authored-by: Federico Rinaldi <gisquerin@gmail.com>
# Objective
`Instant` and `Duration` from the `instant` crate are exposed in
`bevy_utils` to have a single abstraction for native/wasm.
It would be useful to have the same thing for
[`SystemTime`](https://doc.rust-lang.org/std/time/struct.SystemTime.html).
---
## Changelog
### Added
- `bevy_utils` now re-exposes the `instant::SystemTime` struct
Co-authored-by: Charles Bournhonesque <cbournhonesque@snapchat.com>
# Objective
- Users are often confused when their command effects are not visible in
the next system. This PR auto inserts sync points if there are deferred
buffers on a system and there are dependents on that system (systems
with after relationships).
- Manual sync points can lead to users adding more than needed and it's
hard for the user to have a global understanding of their system graph
to know which sync points can be merged. However we can easily calculate
which sync points can be merged automatically.
## Solution
1. Add new edge types to allow opting out of new behavior
2. Insert an sync point for each edge whose initial node has deferred
system params.
3. Reuse nodes if they're at the number of sync points away.
* add opt outs for specific edges with `after_ignore_deferred`,
`before_ignore_deferred` and `chain_ignore_deferred`. The
`auto_insert_apply_deferred` boolean on `ScheduleBuildSettings` can be
set to false to opt out for the whole schedule.
## Perf
This has a small negative effect on schedule build times.
```text
group auto-sync main-for-auto-sync
----- ----------- ------------------
build_schedule/1000_schedule 1.06 2.8±0.15s ? ?/sec 1.00 2.7±0.06s ? ?/sec
build_schedule/1000_schedule_noconstraints 1.01 26.2±0.88ms ? ?/sec 1.00 25.8±0.36ms ? ?/sec
build_schedule/100_schedule 1.02 13.1±0.33ms ? ?/sec 1.00 12.9±0.28ms ? ?/sec
build_schedule/100_schedule_noconstraints 1.08 505.3±29.30µs ? ?/sec 1.00 469.4±12.48µs ? ?/sec
build_schedule/500_schedule 1.00 485.5±6.29ms ? ?/sec 1.00 485.5±9.80ms ? ?/sec
build_schedule/500_schedule_noconstraints 1.00 6.8±0.10ms ? ?/sec 1.02 6.9±0.16ms ? ?/sec
```
---
## Changelog
- Auto insert sync points and added `after_ignore_deferred`,
`before_ignore_deferred`, `chain_no_deferred` and
`auto_insert_apply_deferred` APIs to opt out of this behavior
## Migration Guide
- `apply_deferred` points are added automatically when there is ordering
relationship with a system that has deferred parameters like `Commands`.
If you want to opt out of this you can switch from `after`, `before`,
and `chain` to the corresponding `ignore_deferred` API,
`after_ignore_deferred`, `before_ignore_deferred` or
`chain_ignore_deferred` for your system/set ordering.
- You can also set `ScheduleBuildSettings::auto_insert_sync_points` to
`false` if you want to do it for the whole schedule. Note that in this
mode you can still add `apply_deferred` points manually.
- For most manual insertions of `apply_deferred` you should remove them
as they cannot be merged with the automatically inserted points and
might reduce parallelizability of the system graph.
## TODO
- [x] remove any apply_deferred used in the engine
- [x] ~~decide if we should deprecate manually using apply_deferred.~~
We'll still allow inserting manual sync points for now for whatever edge
cases users might have.
- [x] Update migration guide
- [x] rerun schedule build benchmarks
---------
Co-authored-by: Joseph <21144246+JoJoJet@users.noreply.github.com>
# Objective
- Finish the work done in #8942 .
## Solution
- Rebase the changes made in #8942 and fix the issues stopping it from
being merged earlier
---------
Co-authored-by: Thomas <1234328+thmsgntz@users.noreply.github.com>
# Objective
Make direction construction a bit more ergonomic.
## Solution
Add `Direction2d::from_xy` and `Direction3d::from_xyz`, similar to
`Transform::from_xyz`:
```rust
let dir2 = Direction2d::from_xy(0.5, 0.5).unwrap();
let dir3 = Direction3d::from_xyz(0.5, 0.5, 0.5).unwrap();
```
This can be a bit cleaner than using `new`:
```rust
let dir2 = Direction2d::new(Vec2::new(0.5, 0.5)).unwrap();
let dir3 = Direction3d::new(Vec3::new(0.5, 0.5, 0.5)).unwrap();
```
Fixes https://github.com/bevyengine/bevy/issues/10974
# Objective
Duplicate the ordering logic of the `Main` schedule into the `FixedMain`
schedule.
---
## Changelog
- `FixedUpdate` is no longer the main schedule ran in
`RunFixedUpdateLoop`, `FixedMain` has replaced this and has a similar
structure to `Main`.
## Migration Guide
- Usage of `RunFixedUpdateLoop` should be renamed to `RunFixedMainLoop`.
# Objective
Fixes#10968
## Solution
Pull startup schedules from a list of `ScheduleLabel`s in the same way
the update schedules are handled.
---
## Changelog
- Added `MainScheduleOrder::startup_labels` to allow the editing of the
startup schedule order.
## Migration Guide
- Added a new field to `MainScheduleOrder`, `startup_labels`, for
editing the startup schedule order.
# Objective
Keep up to date with wgpu.
## Solution
Update the wgpu version.
Currently blocked on naga_oil updating to naga 0.14 and releasing a new
version.
3d scenes (or maybe any scene with lighting?) currently don't render
anything due to
```
error: naga_oil bug, please file a report: composer failed to build a valid header: Type [2] '' is invalid
= Capability Capabilities(CUBE_ARRAY_TEXTURES) is required
```
I'm not sure what should be passed in for `wgpu::InstanceFlags`, or if we want to make the gles3minorversion configurable (might be useful for debugging?)
Currently blocked on https://github.com/bevyengine/naga_oil/pull/63, and https://github.com/gfx-rs/wgpu/issues/4569 to be fixed upstream in wgpu first.
## Known issues
Amd+windows+vulkan has issues with texture_binding_arrays (see the image [here](https://github.com/bevyengine/bevy/pull/10266#issuecomment-1819946278)), but that'll be fixed in the next wgpu/naga version, and you can just use dx12 as a workaround for now (Amd+linux mesa+vulkan texture_binding_arrays are fixed though).
---
## Changelog
Updated wgpu to 0.18, naga to 0.14.2, and naga_oil to 0.11.
- Windows desktop GL should now be less painful as it no longer requires Angle.
- You can now toggle shader validation and debug information for debug and release builds using `WgpuSettings.instance_flags` and [InstanceFlags](https://docs.rs/wgpu/0.18.0/wgpu/struct.InstanceFlags.html)
## Migration Guide
- `RenderPassDescriptor` `color_attachments` (as well as `RenderPassColorAttachment`, and `RenderPassDepthStencilAttachment`) now use `StoreOp::Store` or `StoreOp::Discard` instead of a `boolean` to declare whether or not they should be stored.
- `RenderPassDescriptor` now have `timestamp_writes` and `occlusion_query_set` fields. These can safely be set to `None`.
- `ComputePassDescriptor` now have a `timestamp_writes` field. This can be set to `None` for now.
- See the [wgpu changelog](https://github.com/gfx-rs/wgpu/blob/trunk/CHANGELOG.md#v0180-2023-10-25) for additional details
# Objective
- Make the implementation order consistent between all sources to fit
the order in the trait.
## Solution
- Change the implementation order.
# Objective
A workaround for a webgl issue was introduced in #9383 but one function
for mesh2d was missed.
## Solution
Applied the migration guide from #9383 in
`mesh2d_normal_local_to_world()
Note: I'm not using normals so I have not tested the bug & fix
# Objective
The documentation for `AnimationPlayer::play` mentions a non-existent
`transition_duration` argument from an old iteration of the API. It's
confusing.
## Solution
Remove the offending sentence.
# Objective
Since #10776 split `WorldQuery` to `WorldQueryData` and
`WorldQueryFilter`, it should be clear that the query is actually
composed of two parts. It is not factually correct to call "query" only
the data part. Therefore I suggest to rename the `Q` parameter to `D` in
`Query` and related items.
As far as I know, there shouldn't be breaking changes from renaming
generic type parameters.
## Solution
I used a combination of rust-analyzer go to reference and `Ctrl-F`ing
various patterns to catch as many cases as possible. Hopefully I got
them all. Feel free to check if you're concerned of me having missed
some.
## Notes
This and #10779 have many lines in common, so merging one will cause a
lot of merge conflicts to the other.
---------
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
# Objective
- The example in the docs is unsound.
Demo:
```rust
#[derive(Resource)]
struct MyRes(u32);
fn main() {
let mut w = World::new();
w.insert_resource(MyRes(0));
let (mut res, comp) = split_world_access(&mut w);
let mut r1 = res.get_resource_mut::<MyRes>().unwrap();
let mut r2 = res.get_resource_mut::<MyRes>().unwrap();
*r1 = MyRes(1);
*r2 = MyRes(2);
}
```
The API in the example allows aliasing mutable references to the same
resource. Miri also complains when running this.
## Solution
- Change the example API to make the returned `Mut` borrow from the
`OnlyResourceAccessWorld` instead of borrowing from the world via `'w`.
This prevents obtaining more than one `Mut` at the same time from it.
I didn't notice minus where vertices are generated, so could not
understand the order there.
Adding a comment to help the next person who is going to understand Bevy
by reading its code.
# Objective
- Reduce nesting in `process_handle_drop_internal()`.
- Related to #10896.
## Solution
- Use early returns when possible.
- Reduced from 9 levels of indents to 4.
# Objective
add `RenderLayers` awareness to lights. lights default to
`RenderLayers::layer(0)`, and must intersect the camera entity's
`RenderLayers` in order to affect the camera's output.
note that lights already use renderlayers to filter meshes for shadow
casting. this adds filtering lights per view based on intersection of
camera layers and light layers.
fixes#3462
## Solution
PointLights and SpotLights are assigned to individual views in
`assign_lights_to_clusters`, so we simply cull the lights which don't
match the view layers in that function.
DirectionalLights are global, so we
- add the light layers to the `DirectionalLight` struct
- add the view layers to the `ViewUniform` struct
- check for intersection before processing the light in
`apply_pbr_lighting`
potential issue: when mesh/light layers are smaller than the view layers
weird results can occur. e.g:
camera = layers 1+2
light = layers 1
mesh = layers 2
the mesh does not cast shadows wrt the light as (1 & 2) == 0.
the light affects the view as (1+2 & 1) != 0.
the view renders the mesh as (1+2 & 2) != 0.
so the mesh is rendered and lit, but does not cast a shadow.
this could be fixed (so that the light would not affect the mesh in that
view) by adding the light layers to the point and spot light structs,
but i think the setup is pretty unusual, and space is at a premium in
those structs (adding 4 bytes more would reduce the webgl point+spot
light max count to 240 from 256).
I think typical usage is for cameras to have a single layer, and
meshes/lights to maybe have multiple layers to render to e.g. minimaps
as well as primary views.
if there is a good use case for the above setup and we should support
it, please let me know.
---
## Migration Guide
Lights no longer affect all `RenderLayers` by default, now like cameras
and meshes they default to `RenderLayers::layer(0)`. To recover the
previous behaviour and have all lights affect all views, add a
`RenderLayers::all()` component to the light entity.
# Objective
Printing `DynamicStruct` with a debug format does not show the contained
type anymore. For instance, in `examples/reflection/reflection.rs`,
adding `dbg!(&reflect_value);` to line 96 will print:
```rust
[examples/reflection/reflection.rs:96] &reflect_value = DynamicStruct(bevy_reflect::DynamicStruct {
a: 4,
nested: DynamicStruct(bevy_reflect::DynamicStruct {
b: 8,
}),
})
```
## Solution
Show the represented type instead (`reflection::Foo` and
`reflection::Bar` in this case):
```rust
[examples/reflection/reflection.rs:96] &reflect_value = DynamicStruct(reflection::Foo {
a: 4,
nested: DynamicStruct(reflection::Bar {
b: 8,
}),
})
```
---------
Co-authored-by: Gino Valente <49806985+MrGVSV@users.noreply.github.com>
# Objective
The `Despawn` command breaks the hierarchy whenever you use it if the
despawned entity has a parent or any children. This is a serious footgun
because the `Despawn` command has the shortest name, the behavior is
unexpected and not likely to be what you want, and the crash that it
causes can be very difficult to track down.
## Solution
Until this can be fixed by relations, add a note mentioning the footgun
in the documentation.
## Solution
`Commands.remove` and `.retain` (because I copied `remove`s doc)
referenced `EntityWorldMut.remove` and `retain` for more detail but the
`Commands` docs are much more detailed (which makes sense because it is
the most common api), so I have instead inverted this so that
`EntityWorldMut` docs link to `Commands`.
I also made `EntityWorldMut.despawn` reference `World.despawn` for more
details, like `Commands.despawn` does.
# Objective
Fixes#5891.
For mikktspace normal maps, normals must be renormalized in vertex
shaders to match the way mikktspace bakes vertex tangents and normal
maps so that the exact inverse process is applied when shading.
However, for invalid normals like `vec3<f32>(0.0, 0.0, 0.0)`, this
normalization causes NaN values, and because it's in the vertex shader,
it affects the entire triangle and causes it to be shaded as black:
*A cone with a tip that has a vertex normal of [0, 0, 0], causing the
mesh to be shaded as black.*
In some cases, normals of zero are actually *useful*. For example, a
smoothly shaded cone without creases requires the apex vertex normal to
be zero, because there is no singular normal that works correctly, so
the apex shouldn't contribute to the overall shading. Duplicate vertices
for the apex fix some shading issues, but it causes visible creases and
is more expensive. See #5891 and #10298 for more details.
For correctly shaded cones and other similar low-density shapes with
sharp tips, vertex normals of zero can not be normalized in the vertex
shader.
## Solution
Only normalize the vertex normals and tangents in the vertex shader if
the normal isn't [0, 0, 0]. This way, mikktspace normal maps should
still work for everything except the zero normals, and the zero normals
will only be normalized in the fragment shader.
This allows us to render cones correctly:
Notice how there is still a weird shadow banding effect in one area. I
noticed that it can be fixed by normalizing
[here](d2614f2d80/crates/bevy_pbr/src/render/pbr_functions.wgsl (L51)),
which produces a perfectly smooth cone without duplicate vertices:
I didn't add this change yet, because it seems a bit arbitrary. I can
add it here if that'd be useful or make another PR though.
# Objective
`update_accessibility_nodes` is one of the most nested functions in the
entire Bevy repository, with a maximum of 9 levels of indentations. This
PR refactors it down to 3 levels of indentations, while improving
readability on other fronts. The result is a function that is actually
understandable at a first glance.
- This is a proof of concept to demonstrate that it is possible to
gradually lower the nesting limit proposed by #10896.
PS: I read AccessKit's documentation, but I don't have experience with
it. Therefore, naming of variables and subroutines may be a bit off.
PS2: I don't know if the test suite covers the functionality of this
system, but since I've spent quite some time on it and the changes were
simple, I'm pretty confident the refactor is functionally equivalent to
the original.
## Solution
I documented each change with a commit, but as a summary I did the
following to reduce nesting:
- I moved from `if-let` blocks to `let-else` statements where
appropriate to reduce rightward shift
- I extracted the closure body to a new function `update_adapter`
- I factored out parts of `update_adapter` into new functions
`queue_node_for_update` and `add_children_nodes`
**Note for reviewers:** GitHub's diff viewer is not the greatest in
showing horizontal code shifts, therefore you may want to use a
different tool like VSCode to review some commits, especially the second
one (anyway, that commit is very straightforward, despite changing many
lines).
# Objective
A nodes outline should be clipped using its own clipping rect, not its
parents.
fixes#10921
## Solution
Clip outlines by the node's own clipping rect, not the parent's.
If you compare the `overflow` ui example in main with this PR, you'll
see that the outlines that appear when you hover above the images are
now clipped along with the images.
---
## Changelog
* Outlines are now clipped using the node's own clipping rect, not the
parent's.
# Objective
- Improve readability.
- Somewhat relates to #10896.
## Solution
- Use early returns to minimize nesting.
- Change `emitter_translation` to use `if let` instead of `map`.
# Objective
The `update_emitter_positions`, and `update_listener_positions` systems
are added for every call to `add_audio_source`.
Instead, add them once in the `AudioPlugin` directly.
Also merged the calls to `add_systems`.
Caught while working on my schedule visualizer c:
# Objective
Test more complex function signatures for exclusive systems, and test
that `StaticSystemParam` is indeed a `SystemParam`.
I mean, it currently works, but might as well add a test for it.
# Objective
- Resolves#10853
## Solution
- ~~Changed the name of `Input` struct to `PressableInput`.~~
- Changed the name of `Input` struct to `ButtonInput`.
## Migration Guide
- Breaking Change: Users need to rename `Input` to `ButtonInput` in
their projects.
# Objective
A better alternative version of #10843.
Currently, Bevy has a single `Ray` struct for 3D. To allow better
interoperability with Bevy's primitive shapes (#10572) and some third
party crates (that handle e.g. spatial queries), it would be very useful
to have separate versions for 2D and 3D respectively.
## Solution
Separate `Ray` into `Ray2d` and `Ray3d`. These new structs also take
advantage of the new primitives by using `Direction2d`/`Direction3d` for
the direction:
```rust
pub struct Ray2d {
pub origin: Vec2,
pub direction: Direction2d,
}
pub struct Ray3d {
pub origin: Vec3,
pub direction: Direction3d,
}
```
and by using `Plane2d`/`Plane3d` in `intersect_plane`:
```rust
impl Ray2d {
// ...
pub fn intersect_plane(&self, plane_origin: Vec2, plane: Plane2d) -> Option<f32> {
// ...
}
}
```
---
## Changelog
### Added
- `Ray2d` and `Ray3d`
- `Ray2d::new` and `Ray3d::new` constructors
- `Plane2d::new` and `Plane3d::new` constructors
### Removed
- Removed `Ray` in favor of `Ray3d`
### Changed
- `direction` is now a `Direction2d`/`Direction3d` instead of a vector,
which provides guaranteed normalization
- `intersect_plane` now takes a `Plane2d`/`Plane3d` instead of just a
vector for the plane normal
- `Direction2d` and `Direction3d` now derive `Serialize` and
`Deserialize` to preserve ray (de)serialization
## Migration Guide
`Ray` has been renamed to `Ray3d`.
### Ray creation
Before:
```rust
Ray {
origin: Vec3::ZERO,
direction: Vec3::new(0.5, 0.6, 0.2).normalize(),
}
```
After:
```rust
// Option 1:
Ray3d {
origin: Vec3::ZERO,
direction: Direction3d::new(Vec3::new(0.5, 0.6, 0.2)).unwrap(),
}
// Option 2:
Ray3d::new(Vec3::ZERO, Vec3::new(0.5, 0.6, 0.2))
```
### Plane intersections
Before:
```rust
let result = ray.intersect_plane(Vec2::X, Vec2::Y);
```
After:
```rust
let result = ray.intersect_plane(Vec2::X, Plane2d::new(Vec2::Y));
```
# Objective
Implement `TryFrom<Vec2>`/`TryFrom<Vec3>` for direction primitives as
considered in #10857.
## Solution
Implement `TryFrom` for the direction primitives.
These are all equivalent:
```rust
let dir2d = Direction2d::try_from(Vec2::new(0.5, 0.5)).unwrap();
let dir2d = Vec2::new(0.5, 0.5).try_into().unwrap(); // (assumes that the type is inferred)
let dir2d = Direction2d::new(Vec2::new(0.5, 0.5)).unwrap();
```
For error cases, an `Err(InvalidDirectionError)` is returned. It
contains the type of failure:
```rust
/// An error indicating that a direction is invalid.
#[derive(Debug, PartialEq)]
pub enum InvalidDirectionError {
/// The length of the direction vector is zero or very close to zero.
Zero,
/// The length of the direction vector is `std::f32::INFINITY`.
Infinite,
/// The length of the direction vector is `NaN`.
NaN,
}
```
# Objective
- Resolves#10784
## Solution
- As @ickshonpe mentioned in #10784, this is intended behavior but could
benefit from mentioning it in docs.
- I'm also thinking about adding a helper function to disable os scaling
such as `disable_os_scaling()`, but not sure if it's needed.
---
## Changelog
> Add a comment about scaling behavior that happens, and point user to
how he can avoid that behavior.
# Objective
Adds `EntityCommands.retain` and `EntityWorldMut.retain` to remove all
components except the given bundle from the entity.
Fixes#10865.
## Solution
I added a private unsafe function in `EntityWorldMut` called
`remove_bundle_info` which performs the shared behaviour of `remove` and
`retain`, namely taking a `BundleInfo` of components to remove, and
removing them from the given entity. Then `retain` simply gets all the
components on the entity and filters them by whether they are in the
bundle it was passed, before passing this `BundleInfo` into
`remove_bundle_info`.
`EntityCommands.retain` just creates a new type `Retain` which runs
`EntityWorldMut.retain` when run.
---
## Changelog
Added `EntityCommands.retain` and `EntityWorldMut.retain`, which remove
all components except the given bundle from the entity, they can also be
used to remove all components by passing `()` as the bundle.
# Objective
The name `TextAlignment` is really deceptive and almost every new user
gets confused about the differences between aligning text with
`TextAlignment`, aligning text with `Style` and aligning text with
anchor (when using `Text2d`).
## Solution
* Rename `TextAlignment` to `JustifyText`. The associated helper methods
are also renamed.
* Improve the doc comments for text explaining explicitly how the
`JustifyText` component affects the arrangement of text.
* Add some extra cases to the `text_debug` example that demonstate the
differences between alignment using `JustifyText` and alignment using
`Style`.
<img width="757" alt="text_debug_2"
src="https://github.com/bevyengine/bevy/assets/27962798/9d53e647-93f9-4bc7-8a20-0d9f783304d2">
---
## Changelog
* `TextAlignment` has been renamed to `JustifyText`
* `TextBundle::with_text_alignment` has been renamed to
`TextBundle::with_text_justify`
* `Text::with_alignment` has been renamed to `Text::with_justify`
* The `text_alignment` field of `TextMeasureInfo` has been renamed to
`justification`
## Migration Guide
* `TextAlignment` has been renamed to `JustifyText`
* `TextBundle::with_text_alignment` has been renamed to
`TextBundle::with_text_justify`
* `Text::with_alignment` has been renamed to `Text::with_justify`
* The `text_alignment` field of `TextMeasureInfo` has been renamed to
`justification`
# Objective
- Fixes#10806
## Solution
Replaced `new` and `index` methods for both `TableRow` and `TableId`
with `from_*` and `as_*` methods. These remove the need to perform
casting at call sites, reducing the total number of casts in the Bevy
codebase. Within these methods, an appropriate `debug_assertion` ensures
the cast will behave in an expected manner (no wrapping, etc.). I am
using a `debug_assertion` instead of an `assert` to reduce any possible
runtime overhead, however minimal. This choice is something I am open to
changing (or leaving up to another PR) if anyone has any strong
arguments for it.
---
## Changelog
- `ComponentSparseSet::sparse` stores a `TableRow` instead of a `u32`
(private change)
- Replaced `TableRow::new` and `TableRow::index` methods with
`TableRow::from_*` and `TableRow::as_*`, with `debug_assertions`
protecting any internal casting.
- Replaced `TableId::new` and `TableId::index` methods with
`TableId::from_*` and `TableId::as_*`, with `debug_assertions`
protecting any internal casting.
- All `TableId` methods are now `const`
## Migration Guide
- `TableRow::new` -> `TableRow::from_usize`
- `TableRow::index` -> `TableRow::as_usize`
- `TableId::new` -> `TableId::from_usize`
- `TableId::index` -> `TableId::as_usize`
---
## Notes
I have chosen to remove the `index` and `new` methods for the following
chain of reasoning:
- Across the codebase, `new` was called with a mixture of `u32` and
`usize` values. Likewise for `index`.
- Choosing `new` to either be `usize` or `u32` would break half of these
call-sites, requiring `as` casting at the site.
- Adding a second method `new_u32` or `new_usize` avoids the above, bu
looks visually inconsistent.
- Therefore, they should be replaced with `from_*` and `as_*` methods
instead.
Worth noting is that by updating `ComponentSparseSet`, there are now
zero instances of interacting with the inner value of `TableRow` as a
`u32`, it is exclusively used as a `usize` value (due to interactions
with methods like `len` and slice indexing). I have left the `as_u32`
and `from_u32` methods as the "proper" constructors/getters.
This removes the `From<Vec2/3>` implementations for the direction types.
It doesn't seem right to have when it only works if the vector is
nonzero and finite and produces NaN otherwise.
Added `Direction2d/3d::new` which uses `Vec2/3::try_normalize` to
guarantee it returns either a valid direction or `None`.
This should make it impossible to create an invalid direction, which I
think was the intention with these types.
# Objective
Fixes#10291
This adds a way to easily log messages once within system which are
called every frame.
## Solution
Opted for a macro-based approach. The fact that the 'once' call is
tracked per call site makes the `log_once!()` macro very versatile and
easy-to-use. I suspect it will be very handy for all of us, but
especially beginners, to get some initial feedback from systems without
spamming up the place!
I've made the macro's return its internal `has_fired` state, for
situations in which that might be useful to know (trigger something else
alongside the log, for example).
Please let me know if I placed the macro's in the right location, and if
you would like me to do something more clever with the macro's
themselves, since its looking quite copy-pastey at the moment. I've
tried ways to replace 5 with 1 macro's, but no success yet.
One downside of this approach is: Say you wish to warn the user if a
resource is invalid. In this situation, the
`resource.is_valid()` check would still be performed every frame:
```rust
fn my_system(my_res: Res<MyResource>) {
if !my_res.is_valid() {
warn_once!("resource is invalid!");
}
}
```
If you want to prevent that, you would still need to introduce a local
boolean. I don't think this is a very big deal, as expensive checks
shouldn't be called every frame in any case.
## Changelog
Added: `trace_once!()`, `debug_once!()`, `info_once!()`, `warn_once!()`,
and `error_once!()` log macros which fire only once per call site.
# Objective
Resolves Issue #10772.
## Solution
Added the deprecated warning for QueryState::for_each_unchecked, as
noted in the comments of PR #6773.
Followed the wording in the deprecation messages for `for_each` and
`for_each_mut`
# Objective
After #6547, `Query::for_each` has been capable of automatic
vectorization on certain queries, which is seeing a notable (>50% CPU
time improvements) for iteration. However, `Query::for_each` isn't
idiomatic Rust, and lacks the flexibility of iterator combinators.
Ideally, `Query::iter` and friends should be able to achieve the same
results. However, this does seem to blocked upstream
(rust-lang/rust#104914) by Rust's loop optimizations.
## Solution
This is an intermediate solution and refactor. This moves the
`Query::for_each` implementation onto the `Iterator::fold`
implementation for `QueryIter` instead. This should result in the same
automatic vectorization optimization on all `Iterator` functions that
internally use fold, including `Iterator::for_each`, `Iterator::count`,
etc.
With this, it should close the gap between the two completely.
Internally, this PR changes `Query::for_each` to use
`query.iter().for_each(..)` instead of the duplicated implementation.
Separately, the duplicate implementations of internal iteration (i.e.
`Query::par_for_each`) now use portions of the current `Query::for_each`
implementation factored out into their own functions.
This also massively cleans up our internal fragmentation of internal
iteration options, deduplicating the iteration code used in `for_each`
and `par_iter().for_each()`.
---
## Changelog
Changed: `Query::for_each`, `Query::for_each_mut`, `Query::for_each`,
and `Query::for_each_mut` have been moved to `QueryIter`'s
`Iterator::for_each` implementation, and still retains their performance
improvements over normal iteration. These APIs are deprecated in 0.13
and will be removed in 0.14.
---------
Co-authored-by: JoJoJet <21144246+JoJoJet@users.noreply.github.com>
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
# Objective
when loading gltfs we may want to filter the results. in particular, i
need to be able to exclude cameras.
i can do this already by modifying the gltf after load and before
spawning, but it seems like a useful general option.
## Solution
add `GltfLoaderSettings` struct with bool members:
- `load_cameras` : checked before processing camera nodes.
- `load_lights` : checked before processing light nodes
- `load_meshes` : checked before loading meshes, materials and morph
weights
Existing code will work as before. Now you also have the option to
restrict what parts of the gltf are loaded. For example, to load a gltf
but exclude the cameras, replace a call to
`asset_server.load("my.gltf")` with:
```rust
asset_server.load_with_settings(
"my.gltf",
|s: &mut GltfLoaderSettings| {
s.load_cameras = false;
}
);
```
---------
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
# Objective
Fixes#10444
Currently manually removing an asset prevents it from being reloaded
while there are still active handles. Doing so will result in a panic,
because the storage entry has been marked as "empty / None" but the ID
is still assumed to be active by the asset server.
Patterns like `images.remove() -> asset_server.reload()` and
`images.remove() -> images.insert()` would fail if the handle was still
alive.
## Solution
Most of the groundwork for this was already laid in Bevy Asset V2. This
is largely just a matter of splitting out `remove` into two separate
operations:
* `remove_dropped`: remove the stored asset, invalidate the internal
Assets entry (preventing future insertions with the old id), and recycle
the id
* `remove_still_alive`: remove the stored asset, but leave the entry
otherwise untouched (and dont recycle the id).
`remove_still_alive` and `insert` can be called any number of times (in
any order) for an id until `remove_dropped` has been called, which will
invalidate the id.
From a user-facing perspective, there are no API changes and this is non
breaking. The public `Assets::remove` will internally call
`remove_still_alive`. `remove_dropped` can only be called by the
internal "handle management" system.
---
## Changelog
- Fix a bug preventing `Assets::remove` from blocking future inserts for
a specific `AssetIndex`.
# Objective
Fixes https://github.com/bevyengine/bevy/issues/10786
## Solution
The bind_group_layout entries for the prepass were wrong when not all 4
prepass textures were used, as it just zipped [17, 18, 19, 20] with the
smallvec of prepass `bind_group_layout` entries that potentially didn't
contain 4 entries. (eg. if you had a depth and motion vector prepass but
no normal prepass, then depth would be correct but the entry for the
motion vector prepass would be 18 (normal prepass' spot) instead of 19).
Change the prepass `get_bind_group_layout_entries` function to return an
array of `[Option<BindGroupLayoutEntryBuilder>; 4]` and only add the
layout entry if it exists.
# Objective
avoid panics from `calculate_bounds` systems if entities are despawned
in PostUpdate.
there's a running general discussion (#10166) about command panicking.
in the meantime we may as well fix up some cases where it's clear a
failure to insert is safe.
## Solution
change `.insert(aabb)` to `.try_insert(aabb)`
# Objective
> Issue raised on
[Discord](https://discord.com/channels/691052431525675048/1002362493634629796/1179182488787103776)
Currently the following code fails due to a missing `TypePath` bound:
```rust
#[derive(Reflect)] struct Foo<T>(T);
#[derive(Reflect)] struct Bar<T>(Foo<T>);
#[derive(Reflect)] struct Baz<T>(Bar<Foo<T>>);
```
## Solution
Add `TypePath` to the per-field bounds instead of _just_ the generic
type parameter bounds.
### Related Work
It should be noted that #9046 would help make these kinds of issues
easier to work around and/or avoid entirely.
---
## Changelog
- Fixes missing `TypePath` requirement when deriving `Reflect` on nested
generics
# Objective
Fixes#10401
## Solution
* Allow sources to register specific processed/unprocessed watch
warnings.
* Specify per-platform watch warnings. This removes the need to cover
all platform cases in one warning message.
* Only register watch warnings for the _processed_ embedded source, as
warning about watching unprocessed embedded isn't helpful.
---
## Changelog
- Asset sources can now register specific watch warnings.
# Objective
- Shorten paths by removing unnecessary prefixes
## Solution
- Remove the prefixes from many paths which do not need them. Finding
the paths was done automatically using built-in refactoring tools in
Jetbrains RustRover.
# Objective
These type are unavailable to editors and scripting interfaces making
use of reflection.
## Solution
`#[derive(Reflect)]` and call `.register_type` during plugin
initialization.
---
## Changelog
### Added
- Implement `Reflect` for audio-related types, and register them.
# Objective
- Materials should be a more frequent rebind then meshes (due to being
able to use a single vertex buffer, such as in #10164) and therefore
should be in a higher bind group.
---
## Changelog
- For 2d and 3d mesh/material setups (but not UI materials, or other
rendering setups such as gizmos, sprites, or text), mesh data is now in
bind group 1, and material data is now in bind group 2, which is swapped
from how they were before.
## Migration Guide
- Custom 2d and 3d mesh/material shaders should now use bind group 2
`@group(2) @binding(x)` for their bound resources, instead of bind group
1.
- Many internal pieces of rendering code have changed so that mesh data
is now in bind group 1, and material data is now in bind group 2.
Semi-custom rendering setups (that don't use the Material or Material2d
APIs) should adapt to these changes.
# Objective
Keep essentially the same structure of `EntityHasher` from #9903, but
rephrase the multiplication slightly to save an instruction.
cc @superdump
Discord thread:
https://discord.com/channels/691052431525675048/1172033156845674507/1174969772522356756
## Solution
Today, the hash is
```rust
self.hash = i | (i.wrapping_mul(FRAC_U64MAX_PI) << 32);
```
with `i` being `(generation << 32) | index`.
Expanding things out, we get
```rust
i | ( (i * CONST) << 32 )
= (generation << 32) | index | ((((generation << 32) | index) * CONST) << 32)
= (generation << 32) | index | ((index * CONST) << 32) // because the generation overflowed
= (index * CONST | generation) << 32 | index
```
What if we do the same thing, but with `+` instead of `|`? That's almost
the same thing, except that it has carries, which are actually often
better in a hash function anyway, since it doesn't saturate. (`|` can be
dangerous, since once something becomes `-1` it'll stay that, and
there's no mixing available.)
```rust
(index * CONST + generation) << 32 + index
= (CONST << 32 + 1) * index + generation << 32
= (CONST << 32 + 1) * index + (WHATEVER << 32 + generation) << 32 // because the extra overflows and thus can be anything
= (CONST << 32 + 1) * index + ((CONST * generation) << 32 + generation) << 32 // pick "whatever" to be something convenient
= (CONST << 32 + 1) * index + ((CONST << 32 + 1) * generation) << 32
= (CONST << 32 + 1) * index +((CONST << 32 + 1) * (generation << 32)
= (CONST << 32 + 1) * (index + generation << 32)
= (CONST << 32 + 1) * (generation << 32 | index)
= (CONST << 32 + 1) * i
```
So we can do essentially the same thing using a single multiplication
instead of doing multiply-shift-or.
LLVM was already smart enough to merge the shifting into a
multiplication, but this saves the extra `or`:
<https://rust.godbolt.org/z/MEvbz4eo4>
It's a very small change, and often will disappear in load latency
anyway, but it's a couple percent faster in lookups:
(There was more of an improvement here before #10558, but with `to_bits`
being a single `qword` load now, keeping things mostly as it is turned
out to be better than the bigger changes I'd tried in #10605.)
---
## Changelog
(Probably skip it)
## Migration Guide
(none needed)
# Objective
the pbr prepass vertex shader currently only sets
`VertexOutput::world_position` when deferred or motion prepasses are
enabled.
the field is always in the vertex output so is otherwise undetermined,
and the calculation is very cheap.
## Solution
always set the world position in the pbr prepass vert shader.
# Objective
`GlobalsUniform` provides the current time to shaders, which is useful
for animations. `UiMaterial` is an abstraction that makes it easier to
write custom shaders for UI elements.
This PR makes it possible to use the `GlobalsUniform` in `UiMaterial`
shaders.
## Solution
The `GlobalsUniform` is bound to `@group(0) @binding(1)`. It is
accessible in shaders with:
```wgsl
#import bevy_render::globals::Globals
@group(0) @binding(1)
var<uniform> globals: Globals;
```
---
## Changelog
Added `GlobalsUniform` in `UiMaterial` shaders
## Discussion
Should I modify the existing ui_material example to showcase this?
# Objective
Related to #10612.
Enable the
[`clippy::manual_let_else`](https://rust-lang.github.io/rust-clippy/master/#manual_let_else)
lint as a warning. The `let else` form seems more idiomatic to me than a
`match`/`if else` that either match a pattern or diverge, and from the
clippy doc, the lint doesn't seem to have any possible false positive.
## Solution
Add the lint as warning in `Cargo.toml`, refactor places where the lint
triggers.
# Objective
- Follow up to #9694
## Solution
- Same api as #9694 but adapted for `BindGroupLayoutEntry`
- Use the same `ShaderStages` visibilty for all entries by default
- Add `BindingType` helper function that mirror the wgsl equivalent and
that make writing layouts much simpler.
Before:
```rust
let layout = render_device.create_bind_group_layout(&BindGroupLayoutDescriptor {
label: Some("post_process_bind_group_layout"),
entries: &[
BindGroupLayoutEntry {
binding: 0,
visibility: ShaderStages::FRAGMENT,
ty: BindingType::Texture {
sample_type: TextureSampleType::Float { filterable: true },
view_dimension: TextureViewDimension::D2,
multisampled: false,
},
count: None,
},
BindGroupLayoutEntry {
binding: 1,
visibility: ShaderStages::FRAGMENT,
ty: BindingType::Sampler(SamplerBindingType::Filtering),
count: None,
},
BindGroupLayoutEntry {
binding: 2,
visibility: ShaderStages::FRAGMENT,
ty: BindingType::Buffer {
ty: bevy::render::render_resource::BufferBindingType::Uniform,
has_dynamic_offset: false,
min_binding_size: Some(PostProcessSettings::min_size()),
},
count: None,
},
],
});
```
After:
```rust
let layout = render_device.create_bind_group_layout(
"post_process_bind_group_layout"),
&BindGroupLayoutEntries::sequential(
ShaderStages::FRAGMENT,
(
texture_2d_f32(),
sampler(SamplerBindingType::Filtering),
uniform_buffer(false, Some(PostProcessSettings::min_size())),
),
),
);
```
Here's a more extreme example in bevy_solari:
86dab7f5da
---
## Changelog
- Added `BindGroupLayoutEntries` and all `BindingType` helper functions.
## Migration Guide
`RenderDevice::create_bind_group_layout()` doesn't take a
`BindGroupLayoutDescriptor` anymore. You need to provide the parameters
separately
```rust
// 0.12
let layout = render_device.create_bind_group_layout(&BindGroupLayoutDescriptor {
label: Some("post_process_bind_group_layout"),
entries: &[
BindGroupLayoutEntry {
// ...
},
],
});
// 0.13
let layout = render_device.create_bind_group_layout(
"post_process_bind_group_layout",
&[
BindGroupLayoutEntry {
// ...
},
],
);
```
## TODO
- [x] implement a `Dynamic` variant
- [x] update the `RenderDevice::create_bind_group_layout()` api to match
the one from `RenderDevice::creat_bind_group()`
- [x] docs
# Objective
- Fixes#7680
- This is an updated for https://github.com/bevyengine/bevy/pull/8899
which had the same objective but fell a long way behind the latest
changes
## Solution
The traits `WorldQueryData : WorldQuery` and `WorldQueryFilter :
WorldQuery` have been added and some of the types and functions from
`WorldQuery` has been moved into them.
`ReadOnlyWorldQuery` has been replaced with `ReadOnlyWorldQueryData`.
`WorldQueryFilter` is safe (as long as `WorldQuery` is implemented
safely).
`WorldQueryData` is unsafe - safely implementing it requires that
`Self::ReadOnly` is a readonly version of `Self` (this used to be a
safety requirement of `WorldQuery`)
The type parameters `Q` and `F` of `Query` must now implement
`WorldQueryData` and `WorldQueryFilter` respectively.
This makes it impossible to accidentally use a filter in the data
position or vice versa which was something that could lead to bugs.
~~Compile failure tests have been added to check this.~~
It was previously sometimes useful to use `Option<With<T>>` in the data
position. Use `Has<T>` instead in these cases.
The `WorldQuery` derive macro has been split into separate derive macros
for `WorldQueryData` and `WorldQueryFilter`.
Previously it was possible to derive both `WorldQuery` for a struct that
had a mixture of data and filter items. This would not work correctly in
some cases but could be a useful pattern in others. *This is no longer
possible.*
---
## Notes
- The changes outside of `bevy_ecs` are all changing type parameters to
the new types, updating the macro use, or replacing `Option<With<T>>`
with `Has<T>`.
- All `WorldQueryData` types always returned `true` for `IS_ARCHETYPAL`
so I moved it to `WorldQueryFilter` and
replaced all calls to it with `true`. That should be the only logic
change outside of the macro generation code.
- `Changed<T>` and `Added<T>` were being generated by a macro that I
have expanded. Happy to revert that if desired.
- The two derive macros share some functions for implementing
`WorldQuery` but the tidiest way I could find to implement them was to
give them a ton of arguments and ask clippy to ignore that.
## Changelog
### Changed
- Split `WorldQuery` into `WorldQueryData` and `WorldQueryFilter` which
now have separate derive macros. It is not possible to derive both for
the same type.
- `Query` now requires that the first type argument implements
`WorldQueryData` and the second implements `WorldQueryFilter`
## Migration Guide
- Update derives
```rust
// old
#[derive(WorldQuery)]
#[world_query(mutable, derive(Debug))]
struct CustomQuery {
entity: Entity,
a: &'static mut ComponentA
}
#[derive(WorldQuery)]
struct QueryFilter {
_c: With<ComponentC>
}
// new
#[derive(WorldQueryData)]
#[world_query_data(mutable, derive(Debug))]
struct CustomQuery {
entity: Entity,
a: &'static mut ComponentA,
}
#[derive(WorldQueryFilter)]
struct QueryFilter {
_c: With<ComponentC>
}
```
- Replace `Option<With<T>>` with `Has<T>`
```rust
/// old
fn my_system(query: Query<(Entity, Option<With<ComponentA>>)>)
{
for (entity, has_a_option) in query.iter(){
let has_a:bool = has_a_option.is_some();
//todo!()
}
}
/// new
fn my_system(query: Query<(Entity, Has<ComponentA>)>)
{
for (entity, has_a) in query.iter(){
//todo!()
}
}
```
- Fix queries which had filters in the data position or vice versa.
```rust
// old
fn my_system(query: Query<(Entity, With<ComponentA>)>)
{
for (entity, _) in query.iter(){
//todo!()
}
}
// new
fn my_system(query: Query<Entity, With<ComponentA>>)
{
for entity in query.iter(){
//todo!()
}
}
// old
fn my_system(query: Query<AnyOf<(&ComponentA, With<ComponentB>)>>)
{
for (entity, _) in query.iter(){
//todo!()
}
}
// new
fn my_system(query: Query<Option<&ComponentA>, Or<(With<ComponentA>, With<ComponentB>)>>)
{
for entity in query.iter(){
//todo!()
}
}
```
---------
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
# Objective
Kind of helps #10509
## Solution
Add a line to `prepass.wgsl` that ensure the `instance_index` push
constant is always used on WebGL 2. This is not a full fix, as the
_second_ a custom shader is used that doesn't use the push constant, the
breakage will resurface. We have satisfying medium term and long term
solutions. This is just a short term hack for 0.12.1 that will make more
cases work. See #10509 for more details.
# Objective
- `insert_reflect` relies on `reflect_type_path`, which doesn't gives
the actual type path for object created by `clone_value`, leading to an
unexpected panic. This is a workaround for it.
- Fix#10590
## Solution
- Tries to get type path from `get_represented_type_info` if get failed
from `reflect_type_path`.
---
## Defect remaining
- `get_represented_type_info` implies a shortage on performance than
using `TypeRegistry`.
# Objective
Fixes#10688
There were a number of issues at play:
1. The GLTF loader was not registering Scene dependencies properly. They
were being registered at the root instead of on the scene assets. This
made `LoadedWithDependencies` fire immediately on load.
2. Recursive labeled assets _inside_ of labeled assets were not being
loaded. This only became relevant for scenes after fixing (1) because we
now add labeled assets to the nested scene `LoadContext` instead of the
root load context. I'm surprised nobody has hit this yet. I'm glad I
caught it before somebody hit it.
3. Accessing "loaded with dependencies" state on the Asset Server is
boilerplatey + error prone (because you need to manually query two
states).
## Solution
1. In GltfLoader, use a nested LoadContext for scenes and load
dependencies through that context.
2. In the `AssetServer`, load labeled assets recursively.
3. Added a simple `asset_server.is_loaded_with_dependencies(id)`
I also added some docs to `LoadContext` to help prevent this problem in
the future.
---
## Changelog
- Added `AssetServer::is_loaded_with_dependencies`
- Fixed GLTF Scene dependencies
- Fixed nested labeled assets not being loaded
---------
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
# Objective
- Fixes#10676, preventing a possible memory leak for commands which
owned resources.
## Solution
Implemented `Drop` for `CommandQueue`. This has been done entirely in
the private API of `CommandQueue`, ensuring no breaking changes. Also
added a unit test, `test_command_queue_inner_drop_early`, based on the
reproduction steps as outlined in #10676.
## Notes
I believe this can be applied to `0.12.1` as well, but I am uncertain of
the process to make that kind of change. Please let me know if there's
anything I can do to help with the back-porting of this change.
---------
Co-authored-by: Carter Anderson <mcanders1@gmail.com>
# Objective
Fixes#10157
## Solution
Add `AssetMetaCheck` resource which can configure when/if asset meta
files will be read:
```rust
app
// Never attempts to look up meta files. The default meta configuration will be used for each asset.
.insert_resource(AssetMetaCheck::Never)
.add_plugins(DefaultPlugins)
```
This serves as a band-aid fix for the issue with wasm's
`HttpWasmAssetReader` creating a bunch of requests for non-existent
meta, which can slow down asset loading (by waiting for the 404
response) and creates a bunch of noise in the logs. This also provides a
band-aid fix for the more serious issue of itch.io deployments returning
403 responses, which results in full failure of asset loads.
If users don't want to include meta files for all deployed assets for
web builds, and they aren't using meta files at all, they should set
this to `AssetMetaCheck::Never`.
If users do want to include meta files for specific assets, they can use
`AssetMetaCheck::Paths`, which will only look up meta for those paths.
Currently, this defaults to `AssetMetaCheck::Always`, which makes this
fully non-breaking for the `0.12.1` release. _**However it _is_ worth
discussing making this `AssetMetaCheck::Never` by default**_, given that
I doubt most people are using meta files without the Asset Processor
enabled. This would be a breaking change, but it would make WASM / Itch
deployments work by default, which is a pretty big win imo. The downside
is that people using meta files _without_ processing would need to
manually enable `AssetMetaCheck::Always`, which is also suboptimal.
When in `AssetMetaCheck::Processed`, the meta check resource is ignored,
as processing requires asset meta files to function.
In general, I don't love adding this knob as things should ideally "just
work" in all cases. But this is the reality of the current situation.
---
## Changelog
- Added `AssetMetaCheck` resource, which can configure when/if asset
meta files will be read
# Objective
Resolves#10743.
## Solution
Copied over the documentation written by @stepancheng from PR #10718.
I left out the lines from the doctest where `<()>` is removed, as that
seemed to be the part people couldn't decide on whether to keep or not.
## Objective
Currently, events are dropped after two frames. This cadence wasn't
*chosen* for a specific reason, double buffering just lets events
persist for at least two frames. Events only need to be dropped at a
predictable point so that the event queues don't grow forever (i.e.
events should never cause a memory leak).
Events (and especially input events) need to be observable by systems in
`FixedUpdate`, but as-is events are dropped before those systems even
get a chance to see them.
## Solution
Instead of unconditionally dropping events in `First`, require
`FixedUpdate` to first queue the buffer swap (if the `TimePlugin` has
been installed). This way, events are only dropped after a frame that
runs `FixedUpdate`.
## Future Work
In the same way we have independent copies of `Time` for tracking time
in `Main` and `FixedUpdate`, we will need independent copies of `Input`
for tracking press/release status correctly in `Main` and `FixedUpdate`.
--
Every run of `FixedUpdate` covers a specific timespan. For example, if
the fixed timestep `Δt` is 10ms, the first three `FixedUpdate` runs
cover `[0ms, 10ms)`, `[10ms, 20ms)`, and `[20ms, 30ms)`.
`FixedUpdate` can run many times in one frame. For truly
framerate-independent behavior, each `FixedUpdate` should only see the
events that occurred in its covered timespan, but what happens right now
is the first step in the frame reads all pending events.
Fixing that will require timestamped events.
---------
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
forward for bevy user to consume
# Objective
- since winit 0.27 an event WindowOccluded will be produced:
https://docs.rs/winit/latest/winit/event/enum.WindowEvent.html#variant.Occluded
- on ios this is currently the only way to know if an app comes back
from the background which is an important time to to things (like
resetting the badge)
## Solution
- pick up the winit event and forward it to a new `EventWriter`
---
## Changelog
### Added
- new Event `WindowOccluded` added allowing to hook into
`WindowEvent::Occluded` of winit
# Objective
I tried setting `ClearColorConfig` in my app via `Color::FOO.into()`
expecting it to work, but the impl was missing.
## Solution
- Add `impl From<Color> for ClearColorConfig`
- Change examples to use this impl
## Changelog
### Added
- `ClearColorConfig` can be constructed via `.into()` on a `Color`
---------
Signed-off-by: Torstein Grindvik <torstein.grindvik@muybridge.com>
Co-authored-by: Torstein Grindvik <torstein.grindvik@muybridge.com>
# Objective
`wgpu` has a helper method `texture.as_image_copy()` for a common
pattern when making a default-like `ImageCopyTexture` from a texture.
This is used in various places in Bevy for texture copy operations, but
it was not used where `write_texture` is called.
## Solution
- Replace struct `ImageCopyTexture` initialization with
`texture.as_image_copy()` where appropriate
Signed-off-by: Torstein Grindvik <torstein.grindvik@muybridge.com>
Co-authored-by: Torstein Grindvik <torstein.grindvik@muybridge.com>
# Objective
- Window size, scale and position are not correct on the first execution
of the systems
- Fixes#10407, fixes#10642
## Solution
- Don't run `update` before we get a chance to create the window in
winit
- Finish reverting #9826 after #10389
# Objective
The `generate_composite_uuid` utility function hidden in
`bevy_reflect::__macro_exports` could be generally useful to users.
For example, I previously relied on `Hash` to generate a `u64` to create
a deterministic `HandleId`. In v0.12, `HandleId` has been replaced by
`AssetId` which now requires a `Uuid`, which I could generate with this
function.
## Solution
Relocate `generate_composite_uuid` from `bevy_reflect::__macro_exports`
to `bevy_utils::uuid`.
It is still re-exported under `bevy_reflect::__macro_exports` so there
should not be any breaking changes (although, users should generally not
rely on pseudo-private/hidden modules like `__macro_exports`).
I chose to keep it in `bevy_reflect::__macro_exports` so as to not
clutter up our public API and to reduce the number of changes in this
PR. We could have also marked the export as `#[doc(hidden)]`, but
personally I like that we have a dedicated module for this (makes it
clear what is public and what isn't when just looking at the macro
code).
---
## Changelog
- Moved `generate_composite_uuid` to `bevy_utils::uuid` and made it
public
- Note: it was technically already public, just hidden
# Objective
It is currently impossible to control the relative ordering of two 2D
materials at the same depth. This is required to implement wireframes
for 2D meshes correctly
(https://github.com/bevyengine/bevy/issues/5881).
## Solution
Add a `Material2d::depth_bias` function that mirrors the existing 3D
`Material::depth_bias` function.
(this is pulled out of https://github.com/bevyengine/bevy/pull/10489)
---
## Changelog
### Added
- Added `Material2d::depth_bias`
## Migration Guide
`PreparedMaterial2d` has a new `depth_bias` field. A value of 0.0 can be
used to get the previous behavior.
# Objective
Resolves #10727.
`outline.width` was being assigned to `node.outline_offset` instead of
`outline.offset`.
## Solution
Changed `.width` to `.offset` in line 413.
# Objective
Bevy_hierarchy is very useful for ECS only usages of bevy_ecs, but it
currently pulls in bevy_reflect, bevy_app and bevy_core with no way to
opt out.
## Solution
This PR provides features `bevy_app` and `reflect` that are enabled by
default. If disabled, they should remove these dependencies from
bevy_hierarchy.
---
## Changelog
Added features `bevy_app` and `reflect` to bevy_hierarchy.
# Objective
Updates [`futures-lite`](https://github.com/smol-rs/futures-lite) in
bevy_tasks to the next major version (1 -> 2).
Also removes the duplication of `futures-lite`, as `async-fs` requires v
2, so there are currently 2 copies of futures-lite in the dependency
tree.
Futures-lite has received [a number of
updates](https://github.com/smol-rs/futures-lite/blob/master/CHANGELOG.md)
since bevy's current version `1.4`.
---------
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
Co-authored-by: Mike <mike.hsu@gmail.com>
# Objective
- Fix#10499
## Solution
- Use `.get_represented_type_info()` module path and type ident instead
of `.reflect_*` module path and type ident when serializing the `Option`
enum
---
## Changelog
- Fix serialization bug
- Add simple test
- Add `serde_json` dev dependency
- Add `serde` with `derive` feature dev dependency (wouldn't compile for
me without it)
---------
Co-authored-by: hank <hank@hank.co.in>
Co-authored-by: Gino Valente <49806985+MrGVSV@users.noreply.github.com>
Explain https://github.com/bevyengine/bevy/issues/10625.
This might be obvious to those familiar with Bevy internals, but it
surprised me.
---------
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
I incorrectly assumed that moving a system from `Update` to
`FixedUpdate` would simplify logic without hurting performance.
But this is not the case: if there's single-threaded long computation in
the `FixedUpdate`, the machine won't do anything else in parallel with
it. Which might be not what users expect.
So this PR adds a note. But maybe it is obvious, I don't know.
# Objective
fix webgpu+chrome(119) textureSample in non-uniform control flow error
## Solution
modify view transmission texture sampling to use textureSampleLevel.
there are no mips for the view transmission texture, so this doesn't
change the result, but it removes the need for the samples to be in
uniform control flow.
note: in future we may add a mipchain to the transmission texture to
improve the blur effect. if uniformity analysis hasn't improved, this
would require switching to manual derivative calculations (which is
something we plan to do anyway).
## Objective
- Split different types of gizmos into their own files
## Solution
- Move `arc_2d` and `Arc2dBuilder` into `arcs.rs`
- turns out there's no 3d arc function! I'll add one Soon(TM) in another
MR
## Changelog
- Changed
- moved `gizmos::Arc2dBuilder` to `gizmos::arcs::Arc2dBuilder`
## Migration Guide
- `gizmos::Arc2dBuilder` -> `gizmos::arcs::Arc2dBuilder`
# Objective
Problems:
* The clipped, non-visible regions of UI nodes are interactive.
* `RelativeCursorPostion` is set relative to the visible part of the
node. It should be relative to the whole node.
* The `RelativeCursorPostion::mouse_over` method returns `true` when the
mouse is over a clipped part of a node.
fixes#10470
## Solution
Intersect a node's bounding rect with its clipping rect before checking
if it contains the cursor.
Added the field `normalized_visible_node_rect` to
`RelativeCursorPosition`. This is set to the bounds of the unclipped
area of the node rect by `ui_focus_system` expressed in normalized
coordinates relative to the entire node.
Instead of checking if the normalized cursor position lies within a unit
square, it instead checks if it is contained by
`normalized_visible_node_rect`.
Added outlines to the `overflow` example that appear when the cursor is
over the visible part of the images, but not the clipped area.
---
## Changelog
* `ui_focus_system` intersects a node's bounding rect with its clipping
rect before checking if mouse over.
* Added the field `normalized_visible_node_rect` to
`RelativeCursorPosition`. This is set to the bounds of the unclipped
area of the node rect by `ui_focus_system` expressed in normalized
coordinates relative to the entire node.
* `RelativeCursorPostion` is calculated relative to the whole node's
position and size, not only the visible part.
* `RelativeCursorPosition::mouse_over` only returns true when the mouse
is over an unclipped region of the UI node.
* Removed the `Deref` and `DerefMut` derives from
`RelativeCursorPosition` as it is no longer a single field struct.
* Added some outlines to the `overflow` example that respond to
`Interaction` changes.
## Migration Guide
The clipped areas of UI nodes are no longer interactive.
`RelativeCursorPostion` is now calculated relative to the whole node's
position and size, not only the visible part. Its `mouse_over` method
only returns true when the cursor is over an unclipped part of the node.
`RelativeCursorPosition` no longer implements `Deref` and `DerefMut`.
# Objective
- Fixes#10695
## Solution
Fixed obvious blunder in `PartialEq` implementation for
`UntypedAssetId`'s where the `TypeId` was not included in the
comparison. This was not picked up in the unit tests I added because
they only tested over a single asset type.
# Objective
- I've been experimenting with different patterns to try and make async
tasks more convenient. One of the better ones I've found is to return a
command queue to allow for deferred &mut World access. It can be
convenient to check for task completion in a normal system, but it is
hard to do something with the command queue after getting it back. This
pr adds a `append` to Commands. This allows appending the returned
command queue onto the system's commands.
## Solution
- I edited the async compute example to use the new `append`, but not
sure if I should keep the example changed as this might be too
opinionated.
## Future Work
- It would be very easy to pull the pattern used in the example out into
a plugin or a external crate, so users wouldn't have to add the checking
system.
---
## Changelog
- add `append` to `Commands` and `CommandQueue`
# Objective
Enables warning on `clippy::undocumented_unsafe_blocks` across the
workspace rather than only in `bevy_ecs`, `bevy_transform` and
`bevy_utils`. This adds a little awkwardness in a few areas of code that
have trivial safety or explain safety for multiple unsafe blocks with
one comment however automatically prevents these comments from being
missed.
## Solution
This adds `undocumented_unsafe_blocks = "warn"` to the workspace
`Cargo.toml` and fixes / adds a few missed safety comments. I also added
`#[allow(clippy::undocumented_unsafe_blocks)]` where the safety is
explained somewhere above.
There are a couple of safety comments I added I'm not 100% sure about in
`bevy_animation` and `bevy_render/src/view` and I'm not sure about the
use of `#[allow(clippy::undocumented_unsafe_blocks)]` compared to adding
comments like `// SAFETY: See above`.
# Objective
First, some terminology:
- **Minor radius**: The radius of the tube of a torus, i.e. the
"half-thickness"
- **Major radius**: The distance from the center of the tube to the
center of the torus
- **Inner radius**: The radius of the hole (if it exists), `major_radius
- minor_radius`
- **Outer radius**: The radius of the overall shape, `major_radius +
minor_radius`
- **Ring torus**: The familiar donut shape with a hole in the center,
`major_radius > minor_radius`
- **Horn torus**: A torus that doesn't have a hole but also isn't
self-intersecting, `major_radius == minor_radius`
- **Spindle torus**: A self-intersecting torus, `major_radius <
minor_radius`
Different tori from [Wikipedia](https://en.wikipedia.org/wiki/Torus),
where *R* is the major radius and *r* is the minor radius:
Currently, Bevy's torus is represented by a `radius` and `ring_radius`.
I believe these correspond to the outer radius and minor radius, but
they are rather confusing and inconsistent names, and they make the
assumption that the torus always has a ring.
I also couldn't find any other big engines using this representation;
[Godot](https://docs.godotengine.org/en/stable/classes/class_torusmesh.html)
and [Unity
ProBuilder](https://docs.unity3d.com/Packages/com.unity.probuilder@4.0/manual/Torus.html)
use the inner and outer radii, while
[Unreal](https://docs.unrealengine.com/5.3/en-US/BlueprintAPI/GeometryScript/Primitives/AppendTorus/)
uses the minor and major radii.
[Blender](https://docs.blender.org/manual/en/latest/modeling/meshes/primitives.html#torus)
supports both, but defaults to minor/major.
Bevy's `Torus` primitive should have an efficient, consistent, clear and
flexible representation, and the current `radius` and `ring_radius`
properties are not ideal for that.
## Solution
Change `Torus` to be represented by a `minor_radius` and `major_radius`.
- Mathematically correct and consistent
- Flexible, not restricted to ring tori
- Computations and conversions are efficient
- `inner_radius = major_radius - minor_radius`
- `outer_radius = major_radius + minor_radius`
- Mathematical formulae for things like area and volume rely on the
minor and major radii, no conversion needed
Perhaps the primary issue with this representation is that "minor
radius" and "major radius" are rather mathematical, and an inner/outer
radius can be more intuitive in some cases. However, this can be
mitigated with constructors and helpers.
# Objective
Make the impl block for RemovedSystem generic so that the methods can be
called for systems that have inputs or outputs.
## Solution
Simply adding generics to the impl block.
# Objective
Adds `.entry` to `EntityWorldMut` with `Entry`, `OccupiedEntry` and
`VacantEntry` for easier in-situ modification, based on `HashMap.entry`.
Fixes#10635
## Solution
This adds the `entry` method to `EntityWorldMut` which returns an
`Entry`. This is an enum of `OccupiedEntry` and `VacantEntry` and has
the methods `and_modify`, `insert_entry`, `or_insert`, `or_insert_with`
and `or_default`. The only difference between `OccupiedEntry` and
`VacantEntry` is the type, they are both a mutable reference to the
`EntityWorldMut` and a marker for the component type, `HashMap` also
stores things to make it quicker to access the data in `OccupiedEntry`
but I wasn't sure if we had anything it would be logical to store to
make accessing/modifying the component faster? As such, the differences
are that `OccupiedEntry` assumes the entity has the component (because
nothing else can have an `EntityWorldMut` so it can't be changed outside
the entry api) and has different methods.
All the methods are based very closely off `hashbrown::HashMap` (because
its easier to read the source of) with a couple of quirks like
`OccupiedEntry.insert` doesn't return the old value because we don't
appear to have an api for mem::replacing components.
---
## Changelog
- Added a new function `EntityWorldMut.entry` which returns an `Entry`,
allowing easier in-situ modification of a component.
---------
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
Co-authored-by: Pascal Hertleif <killercup@gmail.com>
# Objective
- Fixes#10629
- `UntypedAssetId` and `AssetId` (along with `UntypedHandle` and
`Handle`) do not hash to the same values when pointing to the same
`Asset`. Additionally, comparison and conversion between these types
does not follow idiomatic Rust standards.
## Solution
- Added new unit tests to validate/document expected behaviour
- Added trait implementations to make working with Un/Typed values more
ergonomic
- Ensured hashing and comparison between Un/Typed values is consistent
- Removed `From` trait implementations that panic, and replaced them
with `TryFrom`
---
## Changelog
- Ensured `Handle::<A>::hash` and `UntypedHandle::hash` will produce the
same value for the same `Asset`
- Added non-panicing `Handle::<A>::try_typed`
- Added `PartialOrd` to `UntypedHandle` to match `Handle<A>` (this will
return `None` for `UntypedHandles` for differing `Asset` types)
- Added `TryFrom<UntypedHandle>` for `Handle<A>`
- Added `From<Handle<A>>` for `UntypedHandle`
- Removed panicing `From<Untyped...>` implementations. These are
currently unused within the Bevy codebase, and shouldn't be used
externally, hence removal.
- Added cross-implementations of `PartialEq` and `PartialOrd` for
`UntypedHandle` and `Handle<A>` allowing direct comparison when
`TypeId`'s match.
- Near-identical changes to `AssetId` and `UntypedAssetId`
## Migration Guide
If you relied on any of the panicing `From<Untyped...>` implementations,
simply call the existing `typed` methods instead. Alternatively, use the
new `TryFrom` implementation instead to directly expose possible
mistakes.
## Notes
I've made these changes since `Handle` is such a fundamental type to the
entire `Asset` ecosystem within Bevy, and yet it had pretty unclear
behaviour with no direct testing. The fact that hashing untyped vs typed
versions of the same handle would produce different values is something
I expect to cause a very subtle bug for someone else one day.
I haven't included it in this PR to avoid any controversy, but I also
believe the `typed_unchecked` methods should be removed from these
types, or marked as `unsafe`. The `texture_atlas` example currently uses
it, and I believe it is a bad choice. The performance gained by not
type-checking before conversion would be entirely dwarfed by the act of
actually loading an asset and creating its handle anyway. If an end user
is in a tight loop repeatedly calling `typed_unchecked` on an
`UntypedHandle` for the entire runtime of their application, I think the
small performance drop caused by that safety check is ~~a form of cosmic
justice~~ reasonable.
# Objective
- Standardize fmt for toml files
## Solution
- Add [taplo](https://taplo.tamasfe.dev/) to CI (check for fmt and diff
for toml files), for context taplo is used by the most popular extension
in VScode [Even Better
TOML](https://marketplace.visualstudio.com/items?itemName=tamasfe.even-better-toml
- Add contribution section to explain toml fmt with taplo.
Now to pass CI you need to run `taplo fmt --option indent_string=" "` or
if you use vscode have the `Even Better TOML` extension with 4 spaces
for indent
---------
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
## Objective
- Give all the intuitive groups of gizmos their own file
- don't be a breaking change
- don't change Gizmos interface
- eventually do arcs too
- future types of gizmos should be in their own files
- see also https://github.com/bevyengine/bevy/issues/9400
## Solution
- Moved `gizmos.circle`, `gizmos.2d_circle`, and assorted helpers into
`circles.rs`
- Can also do arcs in this MR if y'all want; just figured I should do
one thing at a time.
## Changelog
- Changed
- `gizmos::CircleBuilder` moved to `gizmos::circles::Circle2dBuilder`
- `gizmos::Circle2dBuilder` moved to `gizmos::circles::Circle2dBuilder`
## Migration Guide
- change `gizmos::CircleBuilder` to `gizmos::circles::Circle2dBuilder`
- change `gizmos::Circle2dBuilder` to `gizmos::circles::Circle2dBuilder`
---------
Co-authored-by: François <mockersf@gmail.com>
# Objective
This PR adds some helpers for `Triangle2d` to work with its winding
order. This could also be extended to polygons (and `Triangle3d` once
it's added).
## Solution
- Add `WindingOrder` enum with `Clockwise`, `Counterclockwise` and
`Invalid` variants
- `Invalid` is for cases where the winding order can not be reliably
computed, i.e. the points lie on a single line and the area is zero
- Add `Triangle2d::winding_order` method that uses a signed surface area
to determine the winding order
- Add `Triangle2d::reverse` method that reverses the winding order by
swapping the second and third vertices
The API looks like this:
```rust
let mut triangle = Triangle2d::new(
Vec2::new(0.0, 2.0),
Vec2::new(-0.5, -1.2),
Vec2::new(-1.0, -1.0),
);
assert_eq!(triangle.winding_order(), WindingOrder::Clockwise);
// Reverse winding order
triangle.reverse();
assert_eq!(triangle.winding_order(), WindingOrder::Counterclockwise);
```
I also added tests to make sure the methods work correctly. For now,
they live in the same file as the primitives.
## Open questions
- Should it be `Counterclockwise` or `CounterClockwise`? The first one
is more correct but perhaps a bit less readable. Counter-clockwise is
also a valid spelling, but it seems to be a lot less common than
counterclockwise.
- Is `WindingOrder::Invalid` a good name? Parry uses
`TriangleOrientation::Degenerate`, but I'm not a huge fan, at least as a
non-native English speaker. Any better suggestions?
- Is `WindingOrder` fine in `bevy_math::primitives`? It's not specific
to a dimension, so I put it there for now.
# Objective
Fix the `bevy_asset/file_watcher` feature in practice depending on
multithreading, while not informing the user of it.
**As I understand it** (I didn't check it), the file watcher feature
depends on spawning a concurrent thread to receive file update events
from the `notify-debouncer-full` crate. But if multithreading is
disabled, that thread will never have time to read the events and
consume them.
- Fixes#10573
## Solution
Add a `compile_error!` causing compilation failure if `file_watcher` is
enabled while `multi-threaded` is disabled.
This is considered better than adding a dependency on `multi-threaded`
on the `file_watcher`, as (according to @mockersf) toggling on/off
`multi-threaded` has a non-zero chance of changing behavior. And we
shouldn't implicitly change behavior. A compilation failure prevents
compilation of code that is invalid, while informing the user of the
steps needed to fix it.
# Objective
- Sometimes it's very useful to know if a `Transform` contains any `NaN`
or infinite values. It's a bit boiler-plate heavy to check translation,
rotation and scale individually.
## Solution
- Add a new method `is_finite` that returns true if, and only if
translation, rotation and scale all are finite.
- It's a natural extension of `Quat::is_finite`, and `Vec3::is_finite`,
which return true if, and only if all their components' `is_finite()`
returns true.
---
## Changelog
- Added `Transform::is_finite`
# Objective
The `map_async` method involves a type `BufferAsyncError`:
https://docs.rs/bevy/latest/bevy/render/render_resource/struct.BufferSlice.html#method.map_async
This type is not re-exported in Bevy, so if a user wants to store a
struct involving this type they have to add wgpu manually to their
manifest.
## Solution
- Re-export wgpu::BufferAsyncError
---
## Changelog
### Added
- Re-export wgpu::BufferAsyncError
Signed-off-by: Torstein Grindvik <torstein.grindvik@muybridge.com>
Co-authored-by: Torstein Grindvik <torstein.grindvik@muybridge.com>
# Objective
- Fix adding `#![allow(clippy::type_complexity)]` everywhere. like #9796
## Solution
- Use the new [lints] table that will land in 1.74
(https://doc.rust-lang.org/nightly/cargo/reference/unstable.html#lints)
- inherit lint to the workspace, crates and examples.
```
[lints]
workspace = true
```
## Changelog
- Bump rust version to 1.74
- Enable lints table for the workspace
```toml
[workspace.lints.clippy]
type_complexity = "allow"
```
- Allow type complexity for all crates and examples
```toml
[lints]
workspace = true
```
---------
Co-authored-by: Martín Maita <47983254+mnmaita@users.noreply.github.com>
# Objective
- Follow up on https://github.com/bevyengine/bevy/pull/10519, diving
deeper into optimising `Entity` due to the `derive`d `PartialOrd`
`partial_cmp` not being optimal with codegen:
https://github.com/rust-lang/rust/issues/106107
- Fixes#2346.
## Solution
Given the previous PR's solution and the other existing LLVM codegen
bug, there seemed to be a potential further optimisation possible with
`Entity`. In exploring providing manual `PartialOrd` impl, it turned out
initially that the resulting codegen was not immediately better than the
derived version. However, once `Entity` was given `#[repr(align(8)]`,
the codegen improved remarkably, even more once the fields in `Entity`
were rearranged to correspond to a `u64` layout (Rust doesn't
automatically reorder fields correctly it seems). The field order and
`align(8)` additions also improved `to_bits` codegen to be a single
`mov` op. In turn, this led me to replace the previous
"non-shortcircuiting" impl of `PartialEq::eq` to use direct `to_bits`
comparison.
The result was remarkably better codegen across the board, even for
hastable lookups.
The current baseline codegen is as follows:
https://godbolt.org/z/zTW1h8PnY
Assuming the following example struct that mirrors with the existing
`Entity` definition:
```rust
#[derive(Clone, Copy, Eq, PartialEq, PartialOrd, Ord)]
pub struct FakeU64 {
high: u32,
low: u32,
}
```
the output for `to_bits` is as follows:
```
example::FakeU64::to_bits:
shl rdi, 32
mov eax, esi
or rax, rdi
ret
```
Changing the struct to:
```rust
#[derive(Clone, Copy, Eq)]
#[repr(align(8))]
pub struct FakeU64 {
low: u32,
high: u32,
}
```
and providing manual implementations for `PartialEq`/`PartialOrd`/`Ord`,
`to_bits` now optimises to:
```
example::FakeU64::to_bits:
mov rax, rdi
ret
```
The full codegen example for this PR is here for reference:
https://godbolt.org/z/n4Mjx165a
To highlight, `gt` comparison goes from
```
example::greater_than:
cmp edi, edx
jae .LBB3_2
xor eax, eax
ret
.LBB3_2:
setne dl
cmp esi, ecx
seta al
or al, dl
ret
```
to
```
example::greater_than:
cmp rdi, rsi
seta al
ret
```
As explained on Discord by @scottmcm :
>The root issue here, as far as I understand it, is that LLVM's
middle-end is inexplicably unwilling to merge loads if that would make
them under-aligned. It leaves that entirely up to its target-specific
back-end, and thus a bunch of the things that you'd expect it to do that
would fix this just don't happen.
## Benchmarks
Before discussing benchmarks, everything was tested on the following
specs:
AMD Ryzen 7950X 16C/32T CPU
64GB 5200 RAM
AMD RX7900XT 20GB Gfx card
Manjaro KDE on Wayland
I made use of the new entity hashing benchmarks to see how this PR would
improve things there. With the changes in place, I first did an
implementation keeping the existing "non shortcircuit" `PartialEq`
implementation in place, but with the alignment and field ordering
changes, which in the benchmark is the `ord_shortcircuit` column. The
`to_bits` `PartialEq` implementation is the `ord_to_bits` column. The
main_ord column is the current existing baseline from `main` branch.
My machine is not super set-up for benchmarking, so some results are
within noise, but there's not just a clear improvement between the
non-shortcircuiting implementation, but even further optimisation taking
place with the `to_bits` implementation.
On my machine, a fair number of the stress tests were not showing any
difference (indicating other bottlenecks), but I was able to get a clear
difference with `many_foxes` with a fox count of 10,000:
Test with `cargo run --example many_foxes --features
bevy/trace_tracy,wayland --release -- --count 10000`:
On avg, a framerate of about 28-29FPS was improved to 30-32FPS. "This
trace" represents the current PR's perf, while "External trace"
represents the `main` branch baseline.
## Changelog
Changed: micro-optimized Entity align and field ordering as well as
providing manual `PartialOrd`/`Ord` impls to help LLVM optimise further.
## Migration Guide
Any `unsafe` code relying on field ordering of `Entity` or sufficiently
cursed shenanigans should change to reflect the different internal
representation and alignment requirements of `Entity`.
Co-authored-by: james7132 <contact@jamessliu.com>
Co-authored-by: NathanW <nathansward@comcast.net>
Bevy introduced unintentional breaking behaviour along with the v0.12.0
release regarding the `App::set_runner` API. See: #10385, #10389 for
details. We weren't able to catch this before release because this API
is only used internally in one or two places (the very places which
motivated the break).
This commit adds a regression test to help guarantee some expected
behaviour for custom runners, namely that `app::update` won't be called
before the runner has a chance to initialise state.
# Objective
There is no easy way to discard some amount for `Time<Fixed>`'s
overstep. This can be useful for online games when the client receives
information about a tick (which happens when you get a FPS drop or the
ping changes for example) it has not yet processed, it can discard
overstep equal to the number of ticks it can jump ahead.
Currently the workaround would be to create a new `Time<Fixed>` copy the
old timestep, advance it by the overstep amount that would remain after
subtracting the discarded amount, and using `.context_mut()` to
overwrite the old context with the new one. If you overwrite the whole
`Time<Fixed>` or forget to copy over the timestep you can introduce
undesirable side effects.
## Solution
Introduce a `discard_overstep` method, which discards the provided
amount of overstep. It uses satuarting_sub to avoid errors (negative
`Duration`s do not exist).
---
## Changelog
- Added `discard_overstep` function to `Time<Fixed>`
---------
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
# Objective
- Allow bevy applications that does not have any assets folder to start
from a read-only directory. (typically installed to a systems folder)
Fixes#10613
## Solution
- warn instead of panic when assets folder creation fails.
# Objective
- Currently, in 0.12 there is an issue that it is not possible to build
bevy for Wasm with feature "file_watcher" enabled. It still would not
compile, but now with proper explanation.
- Fixes https://github.com/bevyengine/bevy/issues/10507
## Solution
- Remove `notify-debouncer-full` dependency on WASM platform entirely.
- Compile with "file_watcher" feature now on platform `wasm32` gives
meaningful compile error.
---
## Changelog
### Fixed
- Compile with "file_watcher" feature now on platform `wasm32` gives
meaningful compile error.
# Add and implement constructors for Primitives
- Adds more Primitive types and adds a constructor for almost all of
them
- Works towards finishing #10572
## Solution
- Created new primitives
- Torus
- Conical Frustum
- Cone
- Ellipse
- Implemented constructors (`Primitive::new`) for almost every single
other primitive.
---------
Co-authored-by: Joona Aalto <jondolf.dev@gmail.com>
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
# Objective
- Handy to have a constant instead of `VolumeLevel::new(0.0)`
- `VolumeLevel::new` is not `const`
## Solution
- Adds a `VolumeLevel::ZERO` constant, which we have for most of our
other types where it makes sense.
---
## Changelog
- Add `VolumeLevel::ZERO`
# Objective
The way `bevy_app` works was changed unnecessarily in #9826 whose
changes should have been specific to `bevy_winit`.
I'm somewhat disappointed that happened and we can see in
https://github.com/bevyengine/bevy/pull/10195 that it made things more
complicated.
Even worse, in #10385 it's clear that this breaks the clean abstraction
over another engine someone built with Bevy!
Fixes#10385.
## Solution
- Move the changes made to `bevy_app` in #9826 to `bevy_winit`
- Revert the changes to `ScheduleRunnerPlugin` and the `run_once` runner
in #10195 as they're no longer necessary.
While this code is breaking relative to `0.12.0`, it reverts the
behavior of `bevy_app` back to how it was in `0.11`.
Due to the nature of the breakage relative to `0.11` I hope this will be
considered for `0.12.1`.
# Objective
- Fix the panic on using Images in UiMaterials due to assets not being
loaded.
- Fixes#10513
## Solution
- add `let else` statement that `return`s or `continue`s instead of
unwrapping, causing a panic.
# Objective
- Fixes#10518
## Solution
I've added a method to `LoadContext`, `load_direct_with_reader`, which
mirrors the behaviour of `load_direct` with a single key difference: it
is provided with the `Reader` by the caller, rather than getting it from
the contained `AssetServer`. This allows for an `AssetLoader` to process
its `Reader` stream, and then directly hand the results off to the
`LoadContext` to handle further loading. The outer `AssetLoader` can
control how the `Reader` is interpreted by providing a relevant
`AssetPath`.
For example, a Gzip decompression loader could process the asset
`images/my_image.png.gz` by decompressing the bytes, then handing the
decompressed result to the `LoadContext` with the new path
`images/my_image.png.gz/my_image.png`. This intuitively reflects the
nature of contained assets, whilst avoiding unintended behaviour, since
the generated path cannot be a real file path (a file and folder of the
same name cannot coexist in most file-systems).
```rust
#[derive(Asset, TypePath)]
pub struct GzAsset {
pub uncompressed: ErasedLoadedAsset,
}
#[derive(Default)]
pub struct GzAssetLoader;
impl AssetLoader for GzAssetLoader {
type Asset = GzAsset;
type Settings = ();
type Error = GzAssetLoaderError;
fn load<'a>(
&'a self,
reader: &'a mut Reader,
_settings: &'a (),
load_context: &'a mut LoadContext,
) -> BoxedFuture<'a, Result<Self::Asset, Self::Error>> {
Box::pin(async move {
let compressed_path = load_context.path();
let file_name = compressed_path
.file_name()
.ok_or(GzAssetLoaderError::IndeterminateFilePath)?
.to_string_lossy();
let uncompressed_file_name = file_name
.strip_suffix(".gz")
.ok_or(GzAssetLoaderError::IndeterminateFilePath)?;
let contained_path = compressed_path.join(uncompressed_file_name);
let mut bytes_compressed = Vec::new();
reader.read_to_end(&mut bytes_compressed).await?;
let mut decoder = GzDecoder::new(bytes_compressed.as_slice());
let mut bytes_uncompressed = Vec::new();
decoder.read_to_end(&mut bytes_uncompressed)?;
// Now that we have decompressed the asset, let's pass it back to the
// context to continue loading
let mut reader = VecReader::new(bytes_uncompressed);
let uncompressed = load_context
.load_direct_with_reader(&mut reader, contained_path)
.await?;
Ok(GzAsset { uncompressed })
})
}
fn extensions(&self) -> &[&str] {
&["gz"]
}
}
```
Because this example is so prudent, I've included an
`asset_decompression` example which implements this exact behaviour:
```rust
fn main() {
App::new()
.add_plugins(DefaultPlugins)
.init_asset::<GzAsset>()
.init_asset_loader::<GzAssetLoader>()
.add_systems(Startup, setup)
.add_systems(Update, decompress::<Image>)
.run();
}
fn setup(mut commands: Commands, asset_server: Res<AssetServer>) {
commands.spawn(Camera2dBundle::default());
commands.spawn((
Compressed::<Image> {
compressed: asset_server.load("data/compressed_image.png.gz"),
..default()
},
Sprite::default(),
TransformBundle::default(),
VisibilityBundle::default(),
));
}
fn decompress<A: Asset>(
mut commands: Commands,
asset_server: Res<AssetServer>,
mut compressed_assets: ResMut<Assets<GzAsset>>,
query: Query<(Entity, &Compressed<A>)>,
) {
for (entity, Compressed { compressed, .. }) in query.iter() {
let Some(GzAsset { uncompressed }) = compressed_assets.remove(compressed) else {
continue;
};
let uncompressed = uncompressed.take::<A>().unwrap();
commands
.entity(entity)
.remove::<Compressed<A>>()
.insert(asset_server.add(uncompressed));
}
}
```
A key limitation to this design is how to type the internally loaded
asset, since the example `GzAssetLoader` is unaware of the internal
asset type `A`. As such, in this example I store the contained asset as
an `ErasedLoadedAsset`, and leave it up to the consumer of the `GzAsset`
to handle typing the final result, which is the purpose of the
`decompress` system. This limitation can be worked around by providing
type information to the `GzAssetLoader`, such as `GzAssetLoader<Image,
ImageAssetLoader>`, but this would require registering the asset loader
for every possible decompression target.
Aside from this limitation, nested asset containerisation works as an
end user would expect; if the user registers a `TarAssetLoader`, and a
`GzAssetLoader`, then they can load assets with compound
containerisation, such as `images.tar.gz`.
---
## Changelog
- Added `LoadContext::load_direct_with_reader`
- Added `asset_decompression` example
## Notes
- While I believe my implementation of a Gzip asset loader is
reasonable, I haven't included it as a public feature of `bevy_asset` to
keep the scope of this PR as focussed as possible.
- I have included `flate2` as a `dev-dependency` for the example; it is
not included in the main dependency graph.
# Objective
Addresses #[10438](https://github.com/bevyengine/bevy/issues/10438)
The objective was to include the failing path in the error for the user
to see.
## Solution
Add a `path` field to the `ReadAssetBytesError::Io` variant to expose
the failing path in the error message.
## Migration Guide
- The `ReadAssetBytesError::Io` variant now contains two named fields
instead of converting from `std::io::Error`.
1. `path`: The requested (failing) path (`PathBuf`)
2. `source`: The source `std::io::Error`
---------
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
# Objective
- Fixes#10532
## Solution
I've updated the various `Event` send methods to return the sent
`EventId`(s). Since these methods previously returned nothing, and this
information is cheap to copy, there should be minimal negative
consequences to providing this additional information. In the case of
`send_batch`, an iterator is returned built from `Range` and `Map`,
which only consumes 16 bytes on the stack with no heap allocations for
all batch sizes. As such, the cost of this information is negligible.
These changes are reflected for `EventWriter` and `World`. For `World`,
the return types are optional to account for the possible lack of an
`Events` resource. Again, these methods previously returned no
information, so its inclusion should only be a benefit.
## Usage
Now when sending events, the IDs of those events is available for
immediate use:
```rust
// Example of a request-response system where the requester can track handled requests.
/// A system which can make and track requests
fn requester(
mut requests: EventWriter<Request>,
mut handled: EventReader<Handled>,
mut pending: Local<HashSet<EventId<Request>>>,
) {
// Check status of previous requests
for Handled(id) in handled.read() {
pending.remove(&id);
}
if !pending.is_empty() {
error!("Not all my requests were handled on the previous frame!");
pending.clear();
}
// Send a new request and remember its ID for later
let request_id = requests.send(Request::MyRequest { /* ... */ });
pending.insert(request_id);
}
/// A system which handles requests
fn responder(
mut requests: EventReader<Request>,
mut handled: EventWriter<Handled>,
) {
for (request, id) in requests.read_with_id() {
if handle(request).is_ok() {
handled.send(Handled(id));
}
}
}
```
In the above example, a `requester` system can send request events, and
keep track of which ones are currently pending by `EventId`. Then, a
`responder` system can act on that event, providing the ID as a
reference that the `requester` can use. Before this PR, it was not
trivial for a system sending events to keep track of events by ID. This
is unfortunate, since for a system reading events, it is trivial to
access the ID of a event.
---
## Changelog
- Updated `Events`:
- Added `send_batch`
- Modified `send` to return the sent `EventId`
- Modified `send_default` to return the sent `EventId`
- Updated `EventWriter`
- Modified `send_batch` to return all sent `EventId`s
- Modified `send` to return the sent `EventId`
- Modified `send_default` to return the sent `EventId`
- Updated `World`
- Modified `send_event` to return the sent `EventId` if sent, otherwise
`None`.
- Modified `send_event_default` to return the sent `EventId` if sent,
otherwise `None`.
- Modified `send_event_batch` to return all sent `EventId`s if sent,
otherwise `None`.
- Added unit test `test_send_events_ids` to ensure returned `EventId`s
match the sent `Event`s
- Updated uses of modified methods.
## Migration Guide
### `send` / `send_default` / `send_batch`
For the following methods:
- `Events::send`
- `Events::send_default`
- `Events::send_batch`
- `EventWriter::send`
- `EventWriter::send_default`
- `EventWriter::send_batch`
- `World::send_event`
- `World::send_event_default`
- `World::send_event_batch`
Ensure calls to these methods either handle the returned value, or
suppress the result with `;`.
```rust
// Now fails to compile due to mismatched return type
fn send_my_event(mut events: EventWriter<MyEvent>) {
events.send_default()
}
// Fix
fn send_my_event(mut events: EventWriter<MyEvent>) {
events.send_default();
}
```
This will most likely be noticed within `match` statements:
```rust
// Before
match is_pressed {
true => events.send(PlayerAction::Fire),
// ^--^ No longer returns ()
false => {}
}
// After
match is_pressed {
true => {
events.send(PlayerAction::Fire);
},
false => {}
}
```
---------
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
Co-authored-by: Nicola Papale <nicopap@users.noreply.github.com>
# Objective
Give us the ability to load untyped assets in AssetLoaders.
## Solution
Basically just copied the code from `load`, but used
`asset_server.load_untyped` instead internally.
## Changelog
Added `load_untyped` method to `LoadContext`
# Objective
- Implement a subset of
https://github.com/bevyengine/rfcs/blob/main/rfcs/12-primitive-shapes.md#feature-name-primitive-shapes
## Solution
- Define a very basic set of primitives in bevy_math
- Assume a 0,0,0 origin for most shapes
- Use radius and half extents to avoid unnecessary computational
overhead wherever they get used
- Provide both Boxed and const generics variants for shapes with
variable sizes
- Boxed is useful if a 3rd party crate wants to use something like
enum-dispatch for all supported primitives
- Const generics is useful when just working on a single primitive, as
it causes no allocs
#### Some discrepancies from the RFC:
- Box was changed to Cuboid, because Box is already used for an alloc
type
- Skipped Cone because it's unclear where the origin should be for
different uses
- Skipped Wedge because it's too niche for an initial PR (we also don't
implement Torus, Pyramid or a Death Star (there's an SDF for that!))
- Skipped Frustum because while it would be a useful math type, it's not
really a common primitive
- Skipped Triangle3d and Quad3d because those are just rotated 2D shapes
## Future steps
- Add more primitives
- Add helper methods to make primitives easier to construct (especially
when half extents are involved)
- Add methods to calculate AABBs for primitives (useful for physics, BVH
construction, for the mesh AABBs, etc)
- Add wrappers for common and cheap operations, like extruding 2D shapes
and translating them
- Use the primitives to generate meshes
- Provide signed distance functions and gradients for primitives (maybe)
---
## Changelog
- Added a collection of primitives to the bevy_math crate
---------
Co-authored-by: Joona Aalto <jondolf.dev@gmail.com>
# Objective
Closes#10319
## Changelog
* Added a new `Color::rgba_from_array([f32; 4]) -> Color` method.
* Added a new `Color::rgb_from_array([f32; 3]) -> Color` method.
* Added a new `Color::rgba_linear_from_array([f32; 4]) -> Color` method.
* Added a new `Color::rgb_linear_from_array([f32; 3]) -> Color` method.
* Added a new `Color::hsla_from_array([f32; 4]) -> Color` method.
* Added a new `Color::hsl_from_array([f32; 3]) -> Color` method.
* Added a new `Color::lcha_from_array([f32; 4]) -> Color` method.
* Added a new `Color::lch_from_array([f32; 3]) -> Color` method.
* Added a new `Color::rgba_to_vec4(&self) -> Vec4` method.
* Added a new `Color::rgba_to_array(&self) -> [f32; 4]` method.
* Added a new `Color::rgb_to_vec3(&self) -> Vec3` method.
* Added a new `Color::rgb_to_array(&self) -> [f32; 3]` method.
* Added a new `Color::rgba_linear_to_vec4(&self) -> Vec4` method.
* Added a new `Color::rgba_linear_to_array(&self) -> [f32; 4]` method.
* Added a new `Color::rgb_linear_to_vec3(&self) -> Vec3` method.
* Added a new `Color::rgb_linear_to_array(&self) -> [f32; 3]` method.
* Added a new `Color::hsla_to_vec4(&self) -> Vec4` method.
* Added a new `Color::hsla_to_array(&self) -> [f32; 4]` method.
* Added a new `Color::hsl_to_vec3(&self) -> Vec3` method.
* Added a new `Color::hsl_to_array(&self) -> [f32; 3]` method.
* Added a new `Color::lcha_to_vec4(&self) -> Vec4` method.
* Added a new `Color::lcha_to_array(&self) -> [f32; 4]` method.
* Added a new `Color::lch_to_vec3(&self) -> Vec3` method.
* Added a new `Color::lch_to_array(&self) -> [f32; 3]` method.
## Migration Guide
`Color::from(Vec4)` is now `Color::rgba_from_array(impl Into<[f32; 4]>)`
`Vec4::from(Color)` is now `Color::rgba_to_vec4(&self)`
Before:
```rust
let color_vec4 = Vec4::new(0.5, 0.5, 0.5);
let color_from_vec4 = Color::from(color_vec4);
let color_array = [0.5, 0.5, 0.5];
let color_from_array = Color::from(color_array);
```
After:
```rust
let color_vec4 = Vec4::new(0.5, 0.5, 0.5);
let color_from_vec4 = Color::rgba_from_array(color_vec4);
let color_array = [0.5, 0.5, 0.5];
let color_from_array = Color::rgba_from_array(color_array);
```
# Objective
Close#10504. Improve the development experience for working with scenes
by not requiring the user to specify a matching version of `ron` in
their `Cargo.toml`
---------
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
# Objective
- When compiling bevy for both singlethreaded and multithreaded contexts
and using `Task` directly, you can run into errors where you expect a
`Task` to be returned but `FakeTask` is instead. Due to `FakeTask` being
private the only solution is to ignore the return at all however because
it *is* returned that isn't totally clear. The error is confusing and
doesn't provide a solution or help figuring it out.
## Solution
- Made `FakeTask` public and added brief documentation providing a use
(none) that helps guide usage (no usage) of FakeTask.
In gamepad.rs, `ButtonSettings` `is_pressed` and `is_released` are both
private, but their implementations use publicly available values.
Keeping them private forces consumers to unnecessarily re-implement this
logic, so just make them public.
## Objective
- Add an arrow gizmo as suggested by #9400
## Solution
(excuse my Protomen music)
https://github.com/bevyengine/bevy/assets/14184826/192adf24-079f-4a4b-a17b-091e892974ec
Wasn't horribly hard when i remembered i can change coordinate systems
whenever I want. Gave them four tips (as suggested by @alice-i-cecile in
discord) instead of trying to decide what direction the tips should
point.
Made the tip length default to 1/10 of the arrow's length, which looked
good enough to me. Hard-coded the angle from the body to the tips to 45
degrees.
## Still TODO
- [x] actual doc comments
- [x] doctests
- [x] `ArrowBuilder.with_tip_length()`
---
## Changelog
- Added `gizmos.arrow()` and `gizmos.arrow_2d()`
- Added arrows to `2d_gizmos` and `3d_gizmos` examples
## Migration Guide
N/A
---------
Co-authored-by: Nicola Papale <nicopap@users.noreply.github.com>
# Objective
Allows chained systems taking an `In<_>` input parameter to be run as
one-shot systems. This API was mentioned in #8963.
In addition, `run_system(_with_input)` returns the system output, for
any `'static` output type.
## Solution
A new function, `World::run_system_with_input` allows a `SystemId<I, O>`
to be run by providing an `I` value as input and producing `O` as an
output.
`SystemId<I, O>` is now generic over the input type `I` and output type
`O`, along with the related functions and types `RegisteredSystem`,
`RemovedSystem`, `register_system`, `remove_system`, and
`RegisteredSystemError`. These default to `()`, preserving the existing
API, for all of the public types.
---
## Changelog
- Added `World::run_system_with_input` function to allow one-shot
systems that take `In<_>` input parameters
- Changed `World::run_system` and `World::register_system` to support
systems with return types beyond `()`
- Added `Commands::run_system_with_input` command that schedules a
one-shot system with an `In<_>` input parameter
# Objective
- Ensure ExtendedMaterial can be referenced in bevy_egui_inspector
correctly
## Solution
Add a more manual `TypePath` implementation to work around bugs in the
derive macro.
# Objective
Make sure a camera which has had its render target changed recomputes
its info.
On main, the following is possible:
- System A has an inactive camera with render target set to the default
`Image` (i.e. white 1x1 rgba texture)
Later:
- System B sets the same camera active and sets the `camera.target` to a
newly created `Image`
**Bug**: Since `camera_system` only checks `Modified` and not `Added`
events, the size of the render target is not recomputed, which means the
camera will render with 1x1 size even though the new target is an
entirely different size.
## Solution
- Ensure `camera_system` checks `Added` image assets events
## Changelog
### Fixed
- Cameras which have their render targets changed to a newly created
target with a different size than the previous target will now render
properly
---------
Signed-off-by: Torstein Grindvik <torstein.grindvik@muybridge.com>
Co-authored-by: Torstein Grindvik <torstein.grindvik@muybridge.com>
Co-authored-by: Afonso Lage <lage.afonso@gmail.com>
Fix a precision issue with in the manual near-clipping function.
This only affected lines that span large distances (starting at 100_000~
units) in my testing.
Fixes#10403
# Objective
- Reduce work from inactive cameras
Tracing was done on the `3d_shapes` example on PR
https://github.com/bevyengine/bevy/pull/10543 .
Doing tracing on a "real" application showed more instances of
unnecessary work.
## Solution
- Skip work on inactive cameras
Signed-off-by: Torstein Grindvik <torstein.grindvik@muybridge.com>
Co-authored-by: Torstein Grindvik <torstein.grindvik@muybridge.com>
# Objective
The quality of Bevy's text rendering can vary wildly depending on the
font, font size, pixel alignment and scale factor.
But this situation can be improved dramatically with some small
adjustments.
## Solution
* Text node positions are rounded to the nearest physical pixel before
rendering.
* Each glyph texture has a 1-pixel wide transparent border added along
its edges.
This means font atlases will use more memory because of the extra pixel
of padding for each glyph but it's more than worth it I think (although
glyph size is increased by 2 pixels on both axes, the net increase is 1
pixel as the font texture atlas's padding has been removed).
## Results
Screenshots are from the 'ui' example with a scale factor of 1.5.
Things can get much uglier with the right font and worst scale
factor<sup>tm</sup>.
### before
<img width="300" alt="list-bad-text"
src="https://github.com/bevyengine/bevy/assets/27962798/482b384d-8743-4bae-9a65-468ff1b4c301">
### after
<img width="300" alt="good_list_text"
src="https://github.com/bevyengine/bevy/assets/27962798/34323b0a-f714-47ba-9728-a59804987bc8">
---
## Changelog
* Font texture atlases are no longer padded.
* Each glyph texture has a 1-pixel wide padding added along its edges.
* Text node positions are rounded to the nearest physical pixel before
rendering.
# Objective
Fixes#10436
Alternative to #10465
## Solution
`load_untyped_async` / `load_internal` currently has a bug. In
`load_untyped_async`, we pass None into `load_internal` for the
`UntypedHandle` of the labeled asset path. This results in a call to
`get_or_create_path_handle_untyped` with `loader.asset_type_id()`
This is a new code path that wasn't hit prior to the newly added
`load_untyped` because `load_untyped_async` was a private method only
used in the context of the `load_folder` impl (which doesn't have
labels)
The fix required some refactoring to catch that case and defer handle
retrieval. I have also made `load_untyped_async` public as it is now
"ready for public use" and unlocks new scenarios.
# Objective
Currently, if a large amount of inactive cameras are spawned, they will
immensely slow down performance.
This can be reproduced by adding
```rust
let default_image = images.add(default());
for _ in 0..10000 {
commands.spawn(Camera3dBundle {
camera: Camera {
is_active: false,
target: RenderTarget::Image(default_image.clone()),
..default()
},
..default()
});
}
```
to for example `3d_shapes`.
Using `tracy`, it's clear that preparing view bind groups for all
cameras is still happening.
Also, visibility checks on the extracted views from inactive cameras
also take place.
## Performance gains
The following `tracy` comparisons show the effect of skipping this
unneeded work.
Yellow is Bevy main, red is with the fix.
### Visibility checks
### Bind group preparation
## Solution
- Check if the cameras are inactive in the appropriate places, and if so
skip them
## Changelog
### Changed
- Do not extract views from inactive cameras or check visiblity from
their extracted views
Signed-off-by: Torstein Grindvik <torstein.grindvik@muybridge.com>
Co-authored-by: Torstein Grindvik <torstein.grindvik@muybridge.com>
(This is my first PR here, so I've probably missed some things. Please
let me know what else I should do to help you as a reviewer!)
# Objective
Due to https://github.com/rust-lang/rust/issues/117800, the `derive`'d
`PartialEq::eq` on `Entity` isn't as good as it could be. Since that's
used in hashtable lookup, let's improve it.
## Solution
The derived `PartialEq::eq` short-circuits if the generation doesn't
match. However, having a branch there is sub-optimal, especially on
64-bit systems like x64 that could just load the whole `Entity` in one
load anyway.
Due to complications around `poison` in LLVM and the exact details of
what unsafe code is allowed to do with reference in Rust
(https://github.com/rust-lang/unsafe-code-guidelines/issues/346), LLVM
isn't allowed to completely remove the short-circuiting. `&Entity` is
marked `dereferencable(8)` so LLVM knows it's allowed to *load* all 8
bytes -- and does so -- but it has to assume that the `index` might be
undef/poison if the `generation` doesn't match, and thus while it finds
a way to do it without needing a branch, it has to do something slightly
more complicated than optimal to combine the results. (LLVM is allowed
to change non-short-circuiting code to use branches, but not the other
way around.)
Here's a link showing the codegen today:
<https://rust.godbolt.org/z/9WzjxrY7c>
```rust
#[no_mangle]
pub fn demo_eq_ref(a: &Entity, b: &Entity) -> bool {
a == b
}
```
ends up generating the following assembly:
```asm
demo_eq_ref:
movq xmm0, qword ptr [rdi]
movq xmm1, qword ptr [rsi]
pcmpeqd xmm1, xmm0
pshufd xmm0, xmm1, 80
movmskpd eax, xmm0
cmp eax, 3
sete al
ret
```
(It's usually not this bad in real uses after inlining and LTO, but it
makes a strong demo.)
This PR manually implements `PartialEq::eq` *without* short-circuiting,
and because that tells LLVM that neither the generations nor the index
can be poison, it doesn't need to be so careful and can generate the
"just compare the two 64-bit values" code you'd have probably already
expected:
```asm
demo_eq_ref:
mov rax, qword ptr [rsi]
cmp qword ptr [rdi], rax
sete al
ret
```
Since this doesn't change the representation of `Entity`, if it's
instead passed by *value*, then each `Entity` is two `u32` registers,
and the old and the new code do exactly the same thing. (Other
approaches, like changing `Entity` to be `[u32; 2]` or `u64`, affect
this case.)
This should hopefully merge easily with changes like
https://github.com/bevyengine/bevy/pull/9907 that also want to change
`Entity`.
## Benchmarks
I'm not super-confident that I got my machine fully consistent for
benchmarking, but whether I run the old or the new one first I get
reasonably consistent results.
Here's a fairly typical example of the benchmarks I added in this PR:
Building the sets seems to be basically the same. It's usually reported
as noise, but sometimes I see a few percent slower or faster.
But lookup hits in particular -- since a hit checks that the key is
equal -- consistently shows around 10% improvement.
`cargo run --example many_cubes --features bevy/trace_tracy --release --
--benchmark` showed as slightly faster with this change, though if I had
to bet I'd probably say it's more noise than meaningful (but at least
it's not worse either):
This is my first PR here -- and my first time running Tracy -- so please
let me know what else I should run, or run things on your own more
reliable machines to double-check.
---
## Changelog
(probably not worth including)
Changed: micro-optimized `Entity::eq` to help LLVM slightly.
## Migration Guide
(I really hope nobody was using this on uninitialized entities where
sufficiently tortured `unsafe` could could technically notice that this
has changed.)
# Objective
After #9002, it seems that "single shot" animations were broken. When
completing, they would reset to their initial value. Which is generally
not what you want.
- Fixes#10480
## Solution
Avoid `%`-ing the animation after the number of completions exceeds the
specified one. Instead, we early-return. This is also true when the
player is playing in reverse.
---
## Changelog
- Avoid resetting animations after `Repeat::Never` animation completion.
# Objective
Fixes an issue where Bevy will look for `.meta` files in the root of the
server instead of `imported_assets/Default` on the web.
## Solution
`self.root_path.join` was seemingly forgotten in the `read_meta`
function on `HttpWasmAssetReader`, though it was included in the `read`
function. This PR simply adds the missing function call.
# Objective
* In Bevy 0.11 asset loaders used `anyhow::Error` for returning errors.
In Bevy 0.12 `AssetLoader` (and `AssetSaver`) have associated `Error`
type. Unfortunately it's type bounds does not allow `anyhow::Error` to
be used despite migration guide claiming otherwise. This makes migration
to 0.12 more challenging. Solve this by changing type bounds for
associated `Error` type.
* Fix#10350
## Solution
Change associated `Error` type bounds to require `Into<Box<dyn
std::error::Error + Send + Sync + 'static>>` to be implemented instead
of `std::error::Error + Send + Sync + 'static`. Both `anyhow::Error` and
errors generated by `thiserror` seems to be fine with such type bound.
---
## Changelog
### Fixed
* Fixed compatibility with `anyhow::Error` in `AssetLoader` and
`AssetSaver` associated `Error` type
# Objective
Fixes#10439
`Timer::percent()` and `Timer::percent_left()` return values in the
range of 0.0 to 1.0, even though their names contain "percent".
These functions should be renamed for clarity.
## Solution
- Rename `Timer::percent()` to `Timer::fraction()`
- Rename `Timer::percent_left()` to `Timer::fraction_remaining()`
---
## Changelog
### Changed
- Renamed `Timer::percent()` to `Timer::fraction()`
- Renamed `Timer::percent_left()` to `Timer::fraction_remaining()`
## Migration Guide
- `Timer::percent()` has been renamed to `Timer::fraction()`
- `Timer::percent_left()` has been renamed to
`Timer::fraction_remaining()`
# Objective
This is similar to #10439.
`Time::<Fixed>::overstep_percentage()` and
`Time::<Fixed>::overstep_percentage_f64()` returns values from 0.0 to
1.0, but their names use the word "percentage". These function names
make it easy to misunderstand that they return values from 0.0 to 100.0.
To avoid confusion, these functions should be renamed to
"`overstep_fraction(_f64)`".
## Solution
Rename them.
---
## Changelog
### Changed
- Renamed `Time::<Fixed>::overstep_percentage()` to
`Time::<Fixed>::overstep_fraction()`
- Renamed `Time::<Fixed>::overstep_percentage_f64()` to
`Time::<Fixed>::overstep_fraction_f64()`
## Migration Guide
- `Time::<Fixed>::overstep_percentage()` has been renamed to
`Time::<Fixed>::overstep_fraction()`
- `Time::<Fixed>::overstep_percentage_f64()` has been renamed to
`Time::<Fixed>::overstep_fraction_f64()`
# Objective
Hot reloading shader imports on windows is currently broken due to
inconsistent `/` and `\` usage ('/` is used in the user facing APIs and
`\` is produced by notify-rs (and likely other OS apis).
Fixes#10500
## Solution
Standardize import paths when loading a `Shader`. The correct long term
fix is to standardize AssetPath on `/`-only, but this is the right scope
of fix for a patch release.
---------
Co-authored-by: François <mockersf@gmail.com>
# Objective
- `CommandQueue::apply` calculates the address of the end of the
internal buffer as a `usize` rather than as a pointer, requiring two
casts of `cursor` to `usize`. Casting pointers to integers is generally
discouraged and may also prevent optimizations. It's also unnecessary
here.
## Solution
- Calculate the end address as a pointer rather than a `usize`.
Small note:
A trivial translation of the old code to use pointers would have
computed `end_addr` as `cursor.add(self.bytes.len())`, which is not
wrong but is an additional `unsafe` operation that also needs to be
properly documented and proven correct. However this operation is
already implemented in the form of the safe `as_mut_ptr_range`, so I
just used that.
# Objective
- The docs on `AssetPath::try_parse` say that it will return an error
when the string is malformed, but it actually just `.unwrap()`s the
result.
## Solution
- Use `?` instead of unwrapping the result.
# Objective
Calling `RenderDevice::poll` requires an instance of `wgpu::Maintain`,
but the type was not reexported by bevy. Working around it requires
adding a dependency on `wgpu`, since bevy does not reexport the `wgpu`
crate as a whole anywhere.
## Solution
Reexport `wgpu::Maintain` in `render_resource`, where the other wgpu
types are reexported.
# Objective
There is an if statement checking if a node is present in a graph
moments after it explicitly being added.
Unless the edge function has super weird side effects and the tests
don't pass, this is unnecessary.
## Solution
Removed it
# Objective
- Allow registration of one-shot systems when those systems have already
been `Box`ed.
- Needed for `bevy_eventlisteners` which allows adding event listeners
with callbacks in normal systems. The current one shot system
implementation requires systems be registered from an exclusive system,
and that those systems be passed in as types that implement
`IntoSystem`. However, the eventlistener callback crate allows users to
define their callbacks in normal systems, by boxing the system and
deferring initialization to an exclusive system.
## Solution
- Separate the registration of the system from the boxing of the system.
This is non-breaking, and adds a new method.
---
## Changelog
- Added `World::register_boxed_system` to allow registration of
already-boxed one shot systems.
# Objective
Had an issue where I had `VisibilityBundle` inside a bundle that
implements `Clone`, but since `VisibilityBundle` doesn't implement
`Clone` that wasn't possible. This PR fixes that.
## Solution
Implement `Clone` for `VisibilityBundle` by deriving it. And also
`SpatialBundle` too because why not.
---
## Changelog
- Added implementation for `Clone` on `VisibilityBundle` and
`SpatialBundle`.
# Objective
Fix a shader error that happens when using pbr morph targets.
## Solution
Fix the function name in the `prepass.wgsl` shader, which is incorrectly
prefixed with `morph::` (added in
61bad4eb57 (diff-97e4500f0a36bc6206d7b1490c8dd1a69459ee39dc6822eb9b2f7b160865f49fR42)).
This section of the shader is only enabled when using morph targets, so
it seems like there are no tests / examples using it?
# Objective
- Entities with both a `BackgroundColor` and a
`Handle<CustomUiMaterial>` are extracted by both pipelines and results
in entities being overwritten in the render world
- Fixes#10431
## Solution
- Ignore entities with `BackgroundColor` when extracting ui material
entities, and document that limit
# Objective
- There is a specialized hasher for entities:
[`EntityHashMap`](https://docs.rs/bevy/latest/bevy/utils/type.EntityHashMap.html)
- [`EntityMapper`] currently uses a normal `HashMap<Entity, Entity>`
- Fixes#10391
## Solution
- Replace the normal `HashMap` with the more performant `EntityHashMap`
## Questions
- This does change public API. Should a system be implemented to help
migrate code?
- Perhaps an `impl From<HashMap<K, V, S>> for EntityHashMap<K, V>`
- I updated to docs for each function that I changed, but I may have
missed something
---
## Changelog
- Changed `EntityMapper` to use `EntityHashMap` instead of normal
`HashMap`
## Migration Guide
If you are using the following types, update their listed methods to use
the new `EntityHashMap`. `EntityHashMap` has the same methods as the
normal `HashMap`, so you just need to replace the name.
### `EntityMapper`
- `get_map`
- `get_mut_map`
- `new`
- `world_scope`
### `ReflectMapEntities`
- `map_all_entities`
- `map_entities`
- `write_to_world`
### `InstanceInfo`
- `entity_map`
- This is a property, not a method.
---
This is my first time contributing in a while, and I'm not familiar with
the usage of `EntityMapper`. I changed the type definition and fixed all
errors, but there may have been things I've missed. Please keep an eye
out for me!
Preparing next release
This PR has been auto-generated
---------
Co-authored-by: Bevy Auto Releaser <41898282+github-actions[bot]@users.noreply.github.com>
Co-authored-by: François <mockersf@gmail.com>
# Objective
- Fixes#10209
- Assets should work in single threaded
## Solution
- In single threaded mode, don't use `async_fs` but fallback on
`std::fs` with a thin layer to mimic the async API
- file `file_asset.rs` is the async imps from `mod.rs`
- file `sync_file_asset.rs` is the same with `async_fs` APIs replaced by
`std::fs`
- which module is used depends on the `multi-threaded` feature
---------
Co-authored-by: Carter Anderson <mcanders1@gmail.com>
# Objective
Fixes a small typo in `bevy_window/src/window.rs`
## Solution
Change `Should be used instead 'scale_factor' when set.` to `Should be
used instead of 'scale_factor' when set.`
# Objective
- Adopt #10239 to get it in time for the release
- Fix accessibility on macOS and linux
## Solution
- call `on_event` from AcccessKit adapter on winit events
---------
Co-authored-by: Nolan Darilek <nolan@thewordnerd.info>
Co-authored-by: Alice Cecile <alice.i.cecil@gmail.com>
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
# Objective
- Changes the default clear color to match the code block color on
Bevy's website.
## Solution
- Changed the clear color, updated text in examples to ensure adequate
contrast. Inconsistent usage of white text color set to use the default
color instead, which is already white.
- Additionally, updated the `3d_scene` example to make it look a bit
better, and use bevy's branding colors.
# Objective
Fixes https://github.com/bevyengine/bevy/issues/9077 (see this issue for
motivations)
## Solution
Implement 1 and 2 of the "How to fix it" section of
https://github.com/bevyengine/bevy/issues/9077
`update_directional_light_cascades` is split into
`clear_directional_light_cascades` and a generic
`build_directional_light_cascades`, to clear once and potentially insert
many times.
---
## Changelog
`DirectionalLight`'s computation is now generic over `CameraProjection`
and can work with custom camera projections.
## Migration Guide
If you have a component `MyCustomProjection` that implements
`CameraProjection`:
- You need to implement a new required associated method,
`get_frustum_corners`, returning an array of the corners of a subset of
the frustum with given `z_near` and `z_far`, in local camera space.
- You can now add the
`build_directional_light_cascades::<MyCustomProjection>` system in
`SimulationLightSystems::UpdateDirectionalLightCascades` after
`clear_directional_light_cascades` for your projection to work with
directional lights.
---------
Co-authored-by: Carter Anderson <mcanders1@gmail.com>
# Objective
Bevy's default bias values for directional and spot lights currently
cause significant artifacts. We should fix that so shadows look good by
default!
This is a less controversial/invasive alternative to #10188, which might
enable us to keep the default bias value low, but also has its own sets
of concerns and caveats that make it a risky choice for Bevy 0.12.
## Solution
Bump the default normal bias from `0.6` to `1.8`. There is precedent for
values in this general area as Godot has a default normal bias of `2.0`.
### Before
### After
## Migration Guide
The default `shadow_normal_bias` value for `DirectionalLight` and
`SpotLight` has changed to accommodate artifacts introduced with the new
shadow PCF changes. It is unlikely (especially given the new PCF shadow
behaviors with these values), but you might need to manually tweak this
value if your scene requires a lower bias and it relied on the previous
default value.
# Objective
Reimplement #8793 on top of the recent rendering changes.
## Solution
The batch creation logic is quite convoluted, but I tested it on enough
examples to convince myself that it works.
The initial value of `batch_image_handle` is changed from
`HandleId::Id(Uuid::nil(), u64::MAX)` to `DEFAULT_IMAGE_HANDLE.id()`,
which allowed me to make the if-block simpler I think.
The default image from `DEFAULT_IMAGE_HANDLE` is always inserted into
`UiImageBindGroups` even if it's not used. I tried to add a check so
that it would be only inserted when there is only one batch using the
default image but this crashed.
---
## Changelog
`prepare_uinodes`
* Changed the initial value of `batch_image_handle` to
`DEFAULT_IMAGE_HANDLE.id()`.
* The default image is added to the UI image bind groups before
assembling the batches.
* A new `UiBatch` isn't created when the next `ExtractedUiNode`s image
is set to `DEFAULT_IMAGE_HANDLE` (unless it is the first item in the UI
phase items list).
# Objective
fix crash / misbehaviour when `DeferredPrepass` is used without
`DepthPrepass`.
- Deferred lighting requires the depth prepass texture to be present, so
that the depth texture is available for binding. without it the deferred
lighting pass will use 0 for depth of all meshes.
- When `DeferredPrepass` is used without other prepass markers, and with
any materials that use `OpaqueRenderMode::Forward`, those entities will
try to queue to the `Opaque3dPrepass` render phase, which doesn't exist,
causing a crash.
## Solution
- check if the prepass phases exist before queueing
- generate prepass textures if `Opaque3dDeferred` is present
- add a note to the DeferredPrepass marker to note that DepthPrepass is
also required by the default deferred lighting pass
- also changed some `With<T>.is_some()`s to `Has<T>`s
# Objective
I was working with forward rendering prepass fragment shaders and ran
into an issue of not being able to access vertex colors in the prepass.
I was able to access vertex colors in regular fragment shaders as well
as in deferred shaders.
## Solution
It seems like this `if` was nested unintentionally as moving it outside
of the `deferred` block works.
---
## Changelog
Enable vertex colors in forward rendering prepass fragment shaders
# Objective
Alternative to #7310
## Solution
Implemented the suggestion from
https://github.com/bevyengine/bevy/pull/7310#discussion_r1083356655
I am guessing that these were originally split as an optimization, but I
am not sure since I believe the original author of the code is the one
speculating about combining them up there.
## Benchmarks
I ran three benchmarks to compare main, this PR, and the approach from
#7310
([updated](https://github.com/rparrett/bevy/commits/rebased-parallel-check-visibility)
to the same commit on main).
This seems to perform slightly better than main in scenarios where most
entities have AABBs, and a bit worse when they don't (`many_lights`).
That seems to make sense to me.
Either way, the difference is ~-20 microseconds in the more common
scenarios or ~+100 microseconds in the less common scenario. I would
speculate that this might perform **very slightly** worse in
single-threaded scenarios.
Benches were run in release mode for 2000 frames while capturing a trace
with tracy.
| bench | commit | check_visibility_system mean μs |
| -- | -- | -- |
| many_cubes | main | 929.5 |
| many_cubes | this | 914.0 |
| many_cubes | 7310 | 1003.5 |
| | |
| many_foxes | main | 191.6 |
| many_foxes | this | 173.2 |
| many_foxes | 7310 | 167.9 |
| | |
| many_lights | main | 619.3 |
| many_lights | this | 703.7 |
| many_lights | 7310 | 842.5 |
## Notes
Technically this behaves slightly differently -- prior to this PR, view
visibility was determined even for entities without `GlobalTransform`. I
don't think this has any practical impact though.
IMO, I don't think we need to do this. But I opened a PR because it
seemed like the handiest way to share the code / benchmarks.
## TODO
I have done some rudimentary testing with the examples above, but I can
do some screenshot diffing if it seems like we want to do this.
# Objective
- Revert #10296
## Solution
- Avoid implementing `Display` without a justification
- `Display` implementation is a guarantee without a direct use, takes
additional time to compile and require work to maintain
- `Debug`, `Reflect` or `Serialize` should cover all needs
# Objective
The `BuildWorldChildren` API was missing several methods that exist in
`BuildChildren`.
## Solution
Added the methods (and tests) for consistency.
# Objective
If we add the stack index to `Node` then we don't need to walk the
`UiStack` repeatedly during extraction.
## Solution
Add a field `stack_index` to `Node`.
Update it in `ui_stack_system`.
Iterate queries directly in the UI's extraction systems.
### Benchmarks
```
cargo run --profile stress-test --features trace_tracy --example many_buttons -- --no-text --no-borders
```
frames (yellow this PR, red main):
<img width="447" alt="frames-per-second"
src="https://github.com/bevyengine/bevy/assets/27962798/385c0ccf-c257-42a2-b736-117542d56eff">
`ui_stack_system`:
<img width="585" alt="ui-stack-system"
src="https://github.com/bevyengine/bevy/assets/27962798/2916cc44-2887-4c3b-a144-13250d84f7d5">
extract schedule:
<img width="469" alt="extract-schedule"
src="https://github.com/bevyengine/bevy/assets/27962798/858d4ab4-d99f-48e8-b153-1c92f51e0743">
---
## Changelog
* Added the field `stack_index` to `Node`.
* `ui_stack_system` updates `Node::stack_index` after a new `UiStack` is
generated.
* The UI's extraction functions iterate a query directly rather than
walking the `UiStack` and doing lookups.
# Objective
<img width="1920" alt="Screenshot 2023-04-26 at 01 07 34"
src="https://user-images.githubusercontent.com/418473/234467578-0f34187b-5863-4ea1-88e9-7a6bb8ce8da3.png">
This PR adds both diffuse and specular light transmission capabilities
to the `StandardMaterial`, with support for screen space refractions.
This enables realistically representing a wide range of real-world
materials, such as:
- Glass; (Including frosted glass)
- Transparent and translucent plastics;
- Various liquids and gels;
- Gemstones;
- Marble;
- Wax;
- Paper;
- Leaves;
- Porcelain.
Unlike existing support for transparency, light transmission does not
rely on fixed function alpha blending, and therefore works with both
`AlphaMode::Opaque` and `AlphaMode::Mask` materials.
## Solution
- Introduces a number of transmission related fields in the
`StandardMaterial`;
- For specular transmission:
- Adds logic to take a view main texture snapshot after the opaque
phase; (in order to perform screen space refractions)
- Introduces a new `Transmissive3d` phase to the renderer, to which all
meshes with `transmission > 0.0` materials are sent.
- Calculates a light exit point (of the approximate mesh volume) using
`ior` and `thickness` properties
- Samples the snapshot texture with an adaptive number of taps across a
`roughness`-controlled radius enabling “blurry” refractions
- For diffuse transmission:
- Approximates transmitted diffuse light by using a second, flipped +
displaced, diffuse-only Lambertian lobe for each light source.
## To Do
- [x] Figure out where `fresnel_mix()` is taking place, if at all, and
where `dielectric_specular` is being calculated, if at all, and update
them to use the `ior` value (Not a blocker, just a nice-to-have for more
correct BSDF)
- To the _best of my knowledge, this is now taking place, after
964340cdd. The fresnel mix is actually "split" into two parts in our
implementation, one `(1 - fresnel(...))` in the transmission, and
`fresnel()` in the light implementations. A surface with more
reflectance now will produce slightly dimmer transmission towards the
grazing angle, as more of the light gets reflected.
- [x] Add `transmission_texture`
- [x] Add `diffuse_transmission_texture`
- [x] Add `thickness_texture`
- [x] Add `attenuation_distance` and `attenuation_color`
- [x] Connect values to glTF loader
- [x] `transmission` and `transmission_texture`
- [x] `thickness` and `thickness_texture`
- [x] `ior`
- [ ] `diffuse_transmission` and `diffuse_transmission_texture` (needs
upstream support in `gltf` crate, not a blocker)
- [x] Add support for multiple screen space refraction “steps”
- [x] Conditionally create no transmission snapshot texture at all if
`steps == 0`
- [x] Conditionally enable/disable screen space refraction transmission
snapshots
- [x] Read from depth pre-pass to prevent refracting pixels in front of
the light exit point
- [x] Use `interleaved_gradient_noise()` function for sampling blur in a
way that benefits from TAA
- [x] Drill down a TAA `#define`, tweak some aspects of the effect
conditionally based on it
- [x] Remove const array that's crashing under HLSL (unless a new `naga`
release with https://github.com/gfx-rs/naga/pull/2496 comes out before
we merge this)
- [ ] Look into alternatives to the `switch` hack for dynamically
indexing the const array (might not be needed, compilers seem to be
decent at expanding it)
- [ ] Add pipeline keys for gating transmission (do we really want/need
this?)
- [x] Tweak some material field/function names?
## A Note on Texture Packing
_This was originally added as a comment to the
`specular_transmission_texture`, `thickness_texture` and
`diffuse_transmission_texture` documentation, I removed it since it was
more confusing than helpful, and will likely be made redundant/will need
to be updated once we have a better infrastructure for preprocessing
assets_
Due to how channels are mapped, you can more efficiently use a single
shared texture image
for configuring the following:
- R - `specular_transmission_texture`
- G - `thickness_texture`
- B - _unused_
- A - `diffuse_transmission_texture`
The `KHR_materials_diffuse_transmission` glTF extension also defines a
`diffuseTransmissionColorTexture`,
that _we don't currently support_. One might choose to pack the
intensity and color textures together,
using RGB for the color and A for the intensity, in which case this
packing advice doesn't really apply.
---
## Changelog
- Added a new `Transmissive3d` render phase for rendering specular
transmissive materials with screen space refractions
- Added rendering support for transmitted environment map light on the
`StandardMaterial` as a fallback for screen space refractions
- Added `diffuse_transmission`, `specular_transmission`, `thickness`,
`ior`, `attenuation_distance` and `attenuation_color` to the
`StandardMaterial`
- Added `diffuse_transmission_texture`, `specular_transmission_texture`,
`thickness_texture` to the `StandardMaterial`, gated behind a new
`pbr_transmission_textures` cargo feature (off by default, for maximum
hardware compatibility)
- Added `Camera3d::screen_space_specular_transmission_steps` for
controlling the number of “layers of transparency” rendered for
transmissive objects
- Added a `TransmittedShadowReceiver` component for enabling shadows in
(diffusely) transmitted light. (disabled by default, as it requires
carefully setting up the `thickness` to avoid self-shadow artifacts)
- Added support for the `KHR_materials_transmission`,
`KHR_materials_ior` and `KHR_materials_volume` glTF extensions
- Renamed items related to temporal jitter for greater consistency
## Migration Guide
- `SsaoPipelineKey::temporal_noise` has been renamed to
`SsaoPipelineKey::temporal_jitter`
- The `TAA` shader def (controlled by the presence of the
`TemporalAntiAliasSettings` component in the camera) has been replaced
with the `TEMPORAL_JITTER` shader def (controlled by the presence of the
`TemporalJitter` component in the camera)
- `MeshPipelineKey::TAA` has been replaced by
`MeshPipelineKey::TEMPORAL_JITTER`
- The `TEMPORAL_NOISE` shader def has been consolidated with
`TEMPORAL_JITTER`
# Objective
- We need to check multiple times if a color is fully transparent, e.g.
for performance optimizations.
- Make code more readable.
- Reduce code duplication, to simplify making changes if needed (e.g. if
we need to take floating point weirdness into account later on).
## Solution
- Introduce a new `Color::is_fully_transparent` helper function to
determine if the alpha of a color is 0.
- Use the helper function in our UI rendering code.
---
## Changelog
- Added `Color::is_fully_transparent` helper function.
---------
Co-authored-by: François <mockersf@gmail.com>
# Objective
Right now, we flip the `world_normal` in response to `double_sided &&
!is_front`, however when calculating `N` from tangents and the normal
map, we don't flip the normal read from the normal map, which produces
extremely weird results.
## Solution
- Pass `double_sided` and `is_front` flags to the
`apply_normal_mapping()` function and use them to conditionally flip
`Nt`
## Comparison
Note: These are from a custom scene running with the `transmission`
branch, (#8015) I noticed lighting got pretty weird for the back side of
translucent `double_sided` materials whenever I added a normal map.
### Before
<img width="1392" alt="Screenshot 2023-10-31 at 01 26 06"
src="https://github.com/bevyengine/bevy/assets/418473/d5f8c9c3-aca1-4c2f-854d-f0d0fd2fb19a">
### After
<img width="1392" alt="Screenshot 2023-10-31 at 01 25 42"
src="https://github.com/bevyengine/bevy/assets/418473/fa0e1aa2-19ad-4c27-bb08-37299d97971c">
---
## Changelog
- Fixed a bug where `StandardMaterial::double_sided` would interact
incorrectly with normal maps, producing broken results.
# Objective
- Work towards GPU-driven culling
(https://github.com/bevyengine/bevy/pull/10164)
## Solution
- Pass the view frustum to the shader view uniform
---
## Changelog
- View Frustums are now extracted to the render world and made available
to shaders
# Objective
- Address inconsistent term usage in the docs for the alignment
properties for UI nodes. Fixes#10218
- `JustifyContent::Stretch` is missing despite being supported by Taffy,
being as the default value for Grids, so it should be added to Bevy as
well
## Solution
- Consistently provide links to the mdn site for the css equivalent
- Match (mostly) the documentation given on the pub struct and the
underlying enums
- Use the term `items` consistently to refer each child in the container
- Add `JustifyContent::Stretch` and map it to Taffy
## Migration Guide
- The `JustifyContents` enum has been expanded to include
`JustifyContents::Stretch`.
# Objective
Align all error-like types to implement `Error`.
Fixes #10176
## Solution
- Derive `Error` on more types
- Refactor instances of manual implementations that could be derived
This adds thiserror as a dependency to bevy_transform, which might
increase compilation time -- but I don't know of any situation where you
might only use that but not any other crate that pulls in bevy_utils.
The `contributors` example has a `LoadContributorsError` type, but as
it's an example I have not updated it. Doing that would mean either
having a `use bevy_internal::utils::thiserror::Error;` in an example
file, or adding `thiserror` as a dev-dependency to the main `bevy`
crate.
---
## Changelog
- All `…Error` types now implement the `Error` trait
Existing truncation code limits the number of attribute buffers to be
less than or equal to the number of vertices.
Instead the number of elements from each attribute buffer should be
limited to the length of the shortest buffer as mentioned in the earlier
warning.
# Objective
- Fixes#10267
## Solution
- Moves the `.take()` from the outer loop of attribute buffers, to the
inner loop of attribute values.
---
# Objective
`normalize` method that expresses a rectangle relative to a normalized
[0..1] x [0..1] space defined by another rectangle.
Useful for UI and texture atlas calculations etc.
---------
Co-authored-by: Rob Parrett <robparrett@gmail.com>
# Objective
- When finding the `CursorIcon` doc, it should be easier to find out
where to use it.
- When saying it is partially copied from the browser, be more clear
about the provenance and link to the spec document.
## Solution
- Link to the example code.
- Link to the CSS3 UI spec document.
Extracted the easy stuff from #8974 .
# Problem
1. Commands from `update_previous_view_projections` would crash when
matching entities were despawned.
2. `TaaPipelineId` and `draw_3d_graph` module were not public.
3. When the motion vectors pointed to pixels that are now off screen, a
smearing artifact could occur.
# Solution
1. Use `try_insert` command instead.
2. Make them public, renaming to `TemporalAntiAliasPipelineId`.
3. Check for this case, and ignore history for pixels that are
off-screen.
# Objective
- Remove special cases where `clippy::doc_markdown` lint is disabled.
## Solution
- Add default values back into `clippy.toml` by adding `".."` to the
list of `doc-valid-idents`.
- Add `"VSync"` and `"WebGL2"` to the list of `doc-valid-idents`.
- Remove all instances where `clippy::doc_markdown` is allowed.
- Fix `max_mip` formatting so that there isn't a warning.
# Objective
- Have more docs for `bevy_text` to avoid reading the source code for
some things.
## Solution
- Add some additional docs.
## Changelog
- `TextSettings.max_font_atlases` in `bevy_text` has been renamed to `
TextSettings.soft_max_font_atlases`.
## Migration Guide
- Usages of `TextSettings.max_font_atlases` from `bevy_text` must be
changed to `TextSettings.soft_max_font_atlases`.
# Situation
- In case of parent without visibility components, the visibility
inheritance of children creates a panic.
## Solution
- Apply same fallback visibility as parent not found instead of panic.
# Objective
Make it obvious why stuff renders pink when rendering stuff with bevy
with `default_features = false` and bevy's default tonemapper
(TonyMcMapFace, it requires a LUT which requires the `tonemapping_luts`,
`ktx2`, and `zstd` features).
Not sure if this should be considered as fixing these issues, but in my
previous PR (https://github.com/bevyengine/bevy/pull/9073, and old
discussions on discord that I only somewhat remember) it seemed like we
didn't want to make ktx2 and zstd required features for
bevy_core_pipeline.
Related https://github.com/bevyengine/bevy/issues/9179
Related https://github.com/bevyengine/bevy/issues/9098
## Solution
This logs an error when a LUT based tonemapper is used without the
`tonemapping_luts` feature enabled, and cleans up the default features a
bit (`tonemapping_luts` now includes the `ktx2` and `zstd` features,
since it panics without them).
Another solution would be to fall back to a non-lut based tonemapper,
but I don't like this solution as then it's not explicitly clear to
users why eg. a library example renders differently than a normal bevy
app (if the library forgot the `tonemapping_luts` feature).
I did remove the `ktx2` and `zstd` features from the list of default
features in Cargo.toml, as I don't believe anything else currently in
bevy relies on them (or at least searching through every hit for `ktx2`
and `zstd` didn't show anything except loading an environment map in
some examples), and they still show up in the `cargo_features` doc as
default features.
---
## Changelog
- The `tonemapping_luts` feature now includes both the `ktx2` and `zstd`
features to avoid a panic when the `tonemapping_luts` feature was enable
without both the `ktx2` and `zstd` feature enabled.
# Objective
- `deferred_rendering` and `load_gltf` fail in WebGPU builds due to
textureSample() being called on the diffuse environment map texture
after non-uniform control flow
## Solution
- The diffuse environment map texture only has one mip, so use
`textureSampleLevel(..., 0.0)` to sample that mip and not require UV
gradient calculation.
# Objective
- Build on the changes in https://github.com/bevyengine/bevy/pull/9982
- Use `ImageSamplerDescriptor` as the "public image sampler descriptor"
interface in all places (for consistency)
- Make it possible to configure textures to use the "default" sampler
(as configured in the `DefaultImageSampler` resource)
- Fix a bug introduced in #9982 that prevents configured samplers from
being used in Basis, KTX2, and DDS textures
---
## Migration Guide
- When using the `Image` API, use `ImageSamplerDescriptor` instead of
`wgpu::SamplerDescriptor`
- If writing custom wgpu renderer features that work with `Image`, call
`&image_sampler.as_wgpu()` to convert to a wgpu descriptor.
# Objective
- Folder handles are not shared. Loading the same folder multiple times
will result in different handles.
- Once folder handles are shared, they can no longer be manually
reloaded, so we should add support for hot-reloading them
## Solution
- Reuse folder handles based on their path
- Trigger a reload of a folder if a file contained in it (or a sub
folder) is added or removed
- This also covers adding/removing/moving sub folders containing files
---------
Co-authored-by: Carter Anderson <mcanders1@gmail.com>
# Objective
- Assets v2 does not currently offer a public API to load untyped assets
## Solution
- Wrap the untyped handle in a `LoadedUntypedAsset` asset to offer a
non-blocking load for untyped assets. The user does not need to know the
actual asset type.
- Handles to `LoadedUntypedAsset` have the same path as the wrapped
asset, but their handles are shared using a label.
The user side of `load_untyped` looks like this:
```rust
use bevy::prelude::*;
use bevy_internal::asset::LoadedUntypedAsset;
fn main() {
App::new()
.add_plugins(DefaultPlugins)
.add_systems(Startup, setup)
.add_systems(Update, check)
.run();
}
#[derive(Resource)]
struct UntypedAsset {
handle: Handle<LoadedUntypedAsset>,
}
fn setup(
mut commands: Commands,
asset_server: Res<AssetServer>,
) {
let handle = asset_server.load_untyped("branding/banner.png");
commands.insert_resource(UntypedAsset { handle });
commands.spawn(Camera2dBundle::default());
}
fn check(
mut commands: Commands,
res: Option<Res<UntypedAsset>>,
assets: Res<Assets<LoadedUntypedAsset>>,
) {
if let Some(untyped_asset) = res {
if let Some(asset) = assets.get(&untyped_asset.handle) {
commands.spawn(SpriteBundle {
texture: asset.handle.clone().typed(),
..default()
});
commands.remove_resource::<UntypedAsset>();
}
}
}
```
---
## Changelog
- `load_untyped` on the asset server now returns a handle to a
`LoadedUntypedAsset` instead of an untyped handle to the asset at the
given path. The untyped handle for the given path can be retrieved from
the `LoadedUntypedAsset` once it is done loading.
## Migration Guide
Whenever possible use the typed API in order to directly get a handle to
your asset. If you do not know the type or need to use `load_untyped`
for a different reason, Bevy 0.12 introduces an additional layer of
indirection. The asset server will return a handle to a
`LoadedUntypedAsset`, which will load in the background. Once it is
loaded, the untyped handle to the asset file can be retrieved from the
`LoadedUntypedAsset`s field `handle`.
---------
Co-authored-by: Carter Anderson <mcanders1@gmail.com>
# Objective
Fixes#9395
Alternative to #9415 (See discussion here)
## Solution
Do clamping like
[`fit-content`](https://www.w3.org/TR/css-sizing-3/#column-sizing).
## Notes
I am not sure if this is a valid approach. It doesn't seem to cause any
obvious issues with our existing examples.
# Objective
- Hot reloading doesn't work the first time it is used
## Solution
- Currently, Bevy processor:
1. Create the `imported_assets` folder
2. Setup a watcher on it
3. Clear empty folders, so the `imported_assets` folder is deleted
4. Recreate the `imported_assets` folder and add all the imported assets
- On a first run without an existing `imported_assets` with some
content, hot reloading won't work as step 3 breaks the file watcher
- This PR stops the empty root folder from being deleted
- Also don't setup the processor internal asset server for file
watching, freeing up a thread
---------
Co-authored-by: Carter Anderson <mcanders1@gmail.com>
# Objective
Fixes#9473
## Solution
Added `resolve()` method to AssetPath. This method accepts a relative
asset path string and returns a "full" path that has been resolved
relative to the current (self) path.
---------
Co-authored-by: Carter Anderson <mcanders1@gmail.com>
# Objective
First of all, this PR took heavy inspiration from #7760 and #5715. It
intends to also fix#5569, but with a slightly different approach.
This also fixes#9335 by reexporting `DynEq`.
## Solution
The advantage of this API is that we can intern a value without
allocating for zero-sized-types and for enum variants that have no
fields. This PR does this automatically in the `SystemSet` and
`ScheduleLabel` derive macros for unit structs and fieldless enum
variants. So this should cover many internal and external use cases of
`SystemSet` and `ScheduleLabel`. In these optimal use cases, no memory
will be allocated.
- The interning returns a `Interned<dyn SystemSet>`, which is just a
wrapper around a `&'static dyn SystemSet`.
- `Hash` and `Eq` are implemented in terms of the pointer value of the
reference, similar to my first approach of anonymous system sets in
#7676.
- Therefore, `Interned<T>` does not implement `Borrow<T>`, only `Deref`.
- The debug output of `Interned<T>` is the same as the interned value.
Edit:
- `AppLabel` is now also interned and the old
`derive_label`/`define_label` macros were replaced with the new
interning implementation.
- Anonymous set ids are reused for different `Schedule`s, reducing the
amount of leaked memory.
### Pros
- `InternedSystemSet` and `InternedScheduleLabel` behave very similar to
the current `BoxedSystemSet` and `BoxedScheduleLabel`, but can be copied
without an allocation.
- Many use cases don't allocate at all.
- Very fast lookups and comparisons when using `InternedSystemSet` and
`InternedScheduleLabel`.
- The `intern` module might be usable in other areas.
- `Interned{ScheduleLabel, SystemSet, AppLabel}` does implement
`{ScheduleLabel, SystemSet, AppLabel}`, increasing ergonomics.
### Cons
- Implementors of `SystemSet` and `ScheduleLabel` still need to
implement `Hash` and `Eq` (and `Clone`) for it to work.
## Changelog
### Added
- Added `intern` module to `bevy_utils`.
- Added reexports of `DynEq` to `bevy_ecs` and `bevy_app`.
### Changed
- Replaced `BoxedSystemSet` and `BoxedScheduleLabel` with
`InternedSystemSet` and `InternedScheduleLabel`.
- Replaced `impl AsRef<dyn ScheduleLabel>` with `impl ScheduleLabel`.
- Replaced `AppLabelId` with `InternedAppLabel`.
- Changed `AppLabel` to use `Debug` for error messages.
- Changed `AppLabel` to use interning.
- Changed `define_label`/`derive_label` to use interning.
- Replaced `define_boxed_label`/`derive_boxed_label` with
`define_label`/`derive_label`.
- Changed anonymous set ids to be only unique inside a schedule, not
globally.
- Made interned label types implement their label trait.
### Removed
- Removed `define_boxed_label` and `derive_boxed_label`.
## Migration guide
- Replace `BoxedScheduleLabel` and `Box<dyn ScheduleLabel>` with
`InternedScheduleLabel` or `Interned<dyn ScheduleLabel>`.
- Replace `BoxedSystemSet` and `Box<dyn SystemSet>` with
`InternedSystemSet` or `Interned<dyn SystemSet>`.
- Replace `AppLabelId` with `InternedAppLabel` or `Interned<dyn
AppLabel>`.
- Types manually implementing `ScheduleLabel`, `AppLabel` or `SystemSet`
need to implement:
- `dyn_hash` directly instead of implementing `DynHash`
- `as_dyn_eq`
- Pass labels to `World::try_schedule_scope`, `World::schedule_scope`,
`World::try_run_schedule`. `World::run_schedule`, `Schedules::remove`,
`Schedules::remove_entry`, `Schedules::contains`, `Schedules::get` and
`Schedules::get_mut` by value instead of by reference.
---------
Co-authored-by: Joseph <21144246+JoJoJet@users.noreply.github.com>
Co-authored-by: Carter Anderson <mcanders1@gmail.com>
# Objective
When a mesh vertex attribute has a vertex count mismatch, a warning
message is printed with the index of the attribute which did not match.
Change to name the attribute, or fall back to the old behaviour if it
was not a known attribute.
Before:
```
MeshVertexAttributeId(2) has a different vertex count (32) than other attributes (64) in this mesh, all attributes will be truncated to match the smallest.
```
After:
```
Vertex_Uv has a different vertex count (32) than other attributes (64) in this mesh, all attributes will be truncated to match the smallest.
```
## Solution
Name the mesh attribute which had a count mismatch.
## Changelog
- If a mesh vertex attribute has a different count than other vertex
attributes, name the offending attribute using a human readable name
Signed-off-by: Torstein Grindvik <torstein.grindvik@muybridge.com>
Co-authored-by: Torstein Grindvik <torstein.grindvik@muybridge.com>
# Objective
- the style of import used by bevy guarantees merge conflicts when any
file change
- This is especially true when import lists are large, such as in
`bevy_pbr`
- Merge conflicts are tricky to resolve. This bogs down rendering PRs
and makes contributing to bevy's rendering system more difficult than it
needs to
## Solution
- Use wildcard imports to replace multiline import list in `bevy_pbr`
I suspect this is controversial, but I'd like to hear alternatives.
Because this is one of many papercuts that makes developing render
features near impossible.
Closes#9946
# Objective
Add a new type mirroring `wgpu::SamplerDescriptor` for
`ImageLoaderSettings` to control how a loaded image should be sampled.
Fix issues with texture sampler descriptors not being set when loading
gltf texture from URI.
## Solution
Add a new `ImageSamplerDescriptor` and its affiliated types that mirrors
`wgpu::SamplerDescriptor`, use it in the image loader settings.
---
## Changelog
### Added
- Added new types `ImageSamplerDescriptor`, `ImageAddressMode`,
`ImageFilterMode`, `ImageCompareFunction` and `ImageSamplerBorderColor`
that mirrors the corresponding wgpu types.
- `ImageLoaderSettings` now carries an `ImageSamplerDescriptor` field
that will be used to determine how the loaded image is sampled, and will
be serialized as part of the image assets `.meta` files.
### Changed
- `Image::from_buffer` now takes the sampler descriptor to use as an
additional parameter.
### Fixed
- Sampler descriptors are set for gltf textures loaded from URI.
# Objective
- Fixes#10250
```
[Log] ERROR crates/bevy_render/src/render_resource/pipeline_cache.rs:823 failed to process shader: (wasm_example.js, line 376)
error: no definition in scope for identifier: 'bevy_pbr::pbr_deferred_functions::unpack_unorm3x4_plus_unorm_20_'
┌─ crates/bevy_pbr/src/deferred/deferred_lighting.wgsl:44:20
│
44 │ frag_coord.z = bevy_pbr::pbr_deferred_functions::unpack_unorm3x4_plus_unorm_20_(deferred_data.b).w;
│ ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ unknown identifier
│
= no definition in scope for identifier: 'bevy_pbr::pbr_deferred_functions::unpack_unorm3x4_plus_unorm_20_'
```
## Solution
- Fix the import path
The "gray" issue is since #9258 on macOS
... at least they're not white anymore
<img width="1294" alt="Screenshot 2023-10-25 at 00 14 11"
src="https://github.com/bevyengine/bevy/assets/8672791/df1a1138-c26c-4417-9b49-a00fbb8561d7">
Updates the requirements on
[async-io](https://github.com/smol-rs/async-io) to permit the latest
version.
<details>
<summary>Release notes</summary>
<p><em>Sourced from <a
href="https://github.com/smol-rs/async-io/releases">async-io's
releases</a>.</em></p>
<blockquote>
<h2>v2.0.0</h2>
<ul>
<li><strong>Breaking:</strong> <code>Async::new()</code> now takes types
that implement <code>AsFd</code>/<code>AsSocket</code> instead of
<code>AsRawFd</code>/<code>AsRawSocket</code>, in order to implement I/O
safety. (<a
href="https://redirect.github.com/smol-rs/async-io/issues/142">#142</a>)</li>
<li><strong>Breaking:</strong> <code>Async::get_mut()</code>,
<code>Async::read_with_mut()</code> and
<code>Async::write_with_mut()</code> are now <code>unsafe</code>. The
underlying source is technically "borrowed" by the polling
instance, so moving it out would be unsound. (<a
href="https://redirect.github.com/smol-rs/async-io/issues/142">#142</a>)</li>
<li>Expose miscellaneous <code>kqueue</code> filters in the
<code>os::kqueue</code> module. (<a
href="https://redirect.github.com/smol-rs/async-io/issues/112">#112</a>)</li>
<li>Expose a way to get the underlying <code>Poller</code>'s file
descriptor on Unix. (<a
href="https://redirect.github.com/smol-rs/async-io/issues/125">#125</a>)</li>
<li>Add a new <code>Async::new_nonblocking</code> method to allow users
to avoid duplicating an already nonblocking socket. (<a
href="https://redirect.github.com/smol-rs/async-io/issues/159">#159</a>)</li>
<li>Remove the unused <code>fastrand</code> and <code>memchr</code>
dependencies. (<a
href="https://redirect.github.com/smol-rs/async-io/issues/131">#131</a>)</li>
<li>Use <code>tracing</code> instead of <code>log</code>. (<a
href="https://redirect.github.com/smol-rs/async-io/issues/140">#140</a>)</li>
<li>Support ESP-IDF. (<a
href="https://redirect.github.com/smol-rs/async-io/issues/144">#144</a>)</li>
<li>Optimize the <code>block_on</code> function to reduce allocation,
leading to a slight performance improvement. (<a
href="https://redirect.github.com/smol-rs/async-io/issues/149">#149</a>)</li>
</ul>
</blockquote>
</details>
<details>
<summary>Changelog</summary>
<p><em>Sourced from <a
href="https://github.com/smol-rs/async-io/blob/master/CHANGELOG.md">async-io's
changelog</a>.</em></p>
<blockquote>
<h1>Version 2.0.0</h1>
<ul>
<li><strong>Breaking:</strong> <code>Async::new()</code> now takes types
that implement <code>AsFd</code>/<code>AsSocket</code> instead of
<code>AsRawFd</code>/<code>AsRawSocket</code>, in order to implement I/O
safety. (<a
href="https://redirect.github.com/smol-rs/async-io/issues/142">#142</a>)</li>
<li><strong>Breaking:</strong> <code>Async::get_mut()</code>,
<code>Async::read_with_mut()</code> and
<code>Async::write_with_mut()</code> are now <code>unsafe</code>. The
underlying source is technically "borrowed" by the polling
instance, so moving it out would be unsound. (<a
href="https://redirect.github.com/smol-rs/async-io/issues/142">#142</a>)</li>
<li>Expose miscellaneous <code>kqueue</code> filters in the
<code>os::kqueue</code> module. (<a
href="https://redirect.github.com/smol-rs/async-io/issues/112">#112</a>)</li>
<li>Expose a way to get the underlying <code>Poller</code>'s file
descriptor on Unix. (<a
href="https://redirect.github.com/smol-rs/async-io/issues/125">#125</a>)</li>
<li>Add a new <code>Async::new_nonblocking</code> method to allow users
to avoid duplicating an already nonblocking socket. (<a
href="https://redirect.github.com/smol-rs/async-io/issues/159">#159</a>)</li>
<li>Remove the unused <code>fastrand</code> and <code>memchr</code>
dependencies. (<a
href="https://redirect.github.com/smol-rs/async-io/issues/131">#131</a>)</li>
<li>Use <code>tracing</code> instead of <code>log</code>. (<a
href="https://redirect.github.com/smol-rs/async-io/issues/140">#140</a>)</li>
<li>Support ESP-IDF. (<a
href="https://redirect.github.com/smol-rs/async-io/issues/144">#144</a>)</li>
<li>Optimize the <code>block_on</code> function to reduce allocation,
leading to a slight performance improvement. (<a
href="https://redirect.github.com/smol-rs/async-io/issues/149">#149</a>)</li>
</ul>
<h1>Version 1.13.0</h1>
<ul>
<li>Use <a
href="https://crates.io/crates/rustix/"><code>rustix</code></a> instead
of <a href="https://crates.io/crates/libc/"><code>libc</code></a>/<a
href="https://crates.io/crates/windows-sys/"><code>windows-sys</code></a>
for system calls (<a
href="https://redirect.github.com/smol-rs/async-io/issues/76">#76</a>)</li>
<li>Add a <code>will_fire</code> method to <code>Timer</code> to test if
it will ever fire (<a
href="https://redirect.github.com/smol-rs/async-io/issues/106">#106</a>)</li>
<li>Reduce syscalls in <code>Async::new</code> (<a
href="https://redirect.github.com/smol-rs/async-io/issues/107">#107</a>)</li>
<li>Improve the drop ergonomics of <code>Readable</code> and
<code>Writable</code> (<a
href="https://redirect.github.com/smol-rs/async-io/issues/109">#109</a>)</li>
<li>Change the "<code>wepoll</code>" in documentation to
"<code>IOCP</code>" (<a
href="https://redirect.github.com/smol-rs/async-io/issues/116">#116</a>)</li>
</ul>
<h1>Version 1.12.0</h1>
<ul>
<li>Switch from <code>winapi</code> to <code>windows-sys</code> (<a
href="https://redirect.github.com/smol-rs/async-io/issues/102">#102</a>)</li>
</ul>
<h1>Version 1.11.0</h1>
<ul>
<li>Update <code>concurrent-queue</code> to v2. (<a
href="https://redirect.github.com/smol-rs/async-io/issues/99">#99</a>)</li>
</ul>
<h1>Version 1.10.0</h1>
<ul>
<li>Remove the dependency on the <code>once_cell</code> crate to restore
the MSRV. (<a
href="https://redirect.github.com/smol-rs/async-io/issues/95">#95</a>)</li>
</ul>
<h1>Version 1.9.0</h1>
<ul>
<li>Fix panic on very large durations. (<a
href="https://redirect.github.com/smol-rs/async-io/issues/87">#87</a>)</li>
<li>Add <code>Timer::never</code> (<a
href="https://redirect.github.com/smol-rs/async-io/issues/87">#87</a>)</li>
</ul>
<h1>Version 1.8.0</h1>
<ul>
<li>Implement I/O safety traits on Rust 1.63+ (<a
href="https://redirect.github.com/smol-rs/async-io/issues/84">#84</a>)</li>
</ul>
<h1>Version 1.7.0</h1>
<ul>
<li>Process timers set for exactly <code>now</code>. (<a
href="https://redirect.github.com/smol-rs/async-io/issues/73">#73</a>)</li>
</ul>
<h1>Version 1.6.0</h1>
<!-- raw HTML omitted -->
</blockquote>
<p>... (truncated)</p>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a
href="7e89eec4d1"><code>7e89eec</code></a>
v2.0.0</li>
<li><a
href="356431754c"><code>3564317</code></a>
tests: Add test for <a
href="https://redirect.github.com/smol-rs/async-io/issues/154">#154</a></li>
<li><a
href="a5da16f072"><code>a5da16f</code></a>
Expose Async::new_nonblocking</li>
<li><a
href="0f2af634d8"><code>0f2af63</code></a>
Avoid needless set_nonblocking calls</li>
<li><a
href="62e3454f38"><code>62e3454</code></a>
Migrate to Rust 2021 (<a
href="https://redirect.github.com/smol-rs/async-io/issues/160">#160</a>)</li>
<li><a
href="59ee2ea27c"><code>59ee2ea</code></a>
Use set_nonblocking in Async::new on Windows (<a
href="https://redirect.github.com/smol-rs/async-io/issues/157">#157</a>)</li>
<li><a
href="d5bc619021"><code>d5bc619</code></a>
Remove needless as_fd/as_socket calls (<a
href="https://redirect.github.com/smol-rs/async-io/issues/158">#158</a>)</li>
<li><a
href="0b5016e567"><code>0b5016e</code></a>
m: Replace socket2 calls with rustix</li>
<li><a
href="8c3c3bd80b"><code>8c3c3bd</code></a>
m: Optimize block_on by caching Parker and Waker</li>
<li><a
href="1b1466a6c1"><code>1b1466a</code></a>
Update this crate to use the new polling breaking changes (<a
href="https://redirect.github.com/smol-rs/async-io/issues/142">#142</a>)</li>
<li>Additional commits viewable in <a
href="https://github.com/smol-rs/async-io/compare/v1.13.0...v2.0.0">compare
view</a></li>
</ul>
</details>
<br />
Dependabot will resolve any conflicts with this PR as long as you don't
alter it yourself. You can also trigger a rebase manually by commenting
`@dependabot rebase`.
[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)
---
<details>
<summary>Dependabot commands and options</summary>
<br />
You can trigger Dependabot actions by commenting on this PR:
- `@dependabot rebase` will rebase this PR
- `@dependabot recreate` will recreate this PR, overwriting any edits
that have been made to it
- `@dependabot merge` will merge this PR after your CI passes on it
- `@dependabot squash and merge` will squash and merge this PR after
your CI passes on it
- `@dependabot cancel merge` will cancel a previously requested merge
and block automerging
- `@dependabot reopen` will reopen this PR if it is closed
- `@dependabot close` will close this PR and stop Dependabot recreating
it. You can achieve the same result by closing it manually
- `@dependabot show <dependency name> ignore conditions` will show all
of the ignore conditions of the specified dependency
- `@dependabot ignore this major version` will close this PR and stop
Dependabot creating any more for this major version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this minor version` will close this PR and stop
Dependabot creating any more for this minor version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this dependency` will close this PR and stop
Dependabot creating any more for this dependency (unless you reopen the
PR or upgrade to it yourself)
</details>
Signed-off-by: dependabot[bot] <support@github.com>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
# Objective
A follow-up PR for https://github.com/bevyengine/bevy/pull/10221
## Changelog
Replaced usages of texture_descriptor.size with the helper methods of
`Image` through the entire engine codebase
# Objective
Reduce code duplication and improve APIs of Bevy's [global
taskpools](https://github.com/bevyengine/bevy/blob/main/crates/bevy_tasks/src/usages.rs).
## Solution
- As all three of the global taskpools have identical implementations
and only differ in their identifiers, this PR moves the implementation
into a macro to reduce code duplication.
- The `init` method is renamed to `get_or_init` to more accurately
reflect what it really does.
- Add a new `try_get` method that just returns `None` when the pool is
uninitialized, to complement the other getter methods.
- Minor documentation improvements to accompany the above changes.
---
## Changelog
- Added a new `try_get` method to the global TaskPools
- The global TaskPools' `init` method has been renamed to `get_or_init`
for clarity
- Documentation improvements
## Migration Guide
- Uses of `ComputeTaskPool::init`, `AsyncComputeTaskPool::init` and
`IoTaskPool::init` should be changed to `::get_or_init`.
# Objective
- Handle pausing audio when Android app is suspended
## Solution
- This is the start of application lifetime events. They are mostly
useful on mobile
- Next version of winit should add a few more
- When application is suspended, send an event to notify the
application, and run the schedule one last time before actually
suspending the app
- Audio is now suspended too 🎉https://github.com/bevyengine/bevy/assets/8672791/d74e2e09-ee29-4f40-adf2-36a0c064f94e
---------
Co-authored-by: Marco Buono <418473+coreh@users.noreply.github.com>
# Objective
Fog color was passed to shaders without conversion from sRGB to linear
color space. Because shaders expect colors in linear space this resulted
in wrong color being used. This is most noticeable in open scenes with
dark fog color and clear color set to the same color. In such case
background/clear color (which is properly processed) is going to be
darker than very far objects.
Example:
[bevy-fog-color-bug.zip](https://github.com/bevyengine/bevy/files/13063718/bevy-fog-color-bug.zip)
## Solution
Add missing conversion of fog color to linear color space.
---
## Changelog
* Fixed conversion of fog color
## Migration Guide
- Colors in `FogSettings` struct (`color` and `directional_light_color`)
are now sent to the GPU in linear space. If you were using
`Color::rgb()`/`Color::rgba()` and would like to retain the previous
colors, you can quickly fix it by switching to
`Color::rgb_linear()`/`Color::rgba_linear()`.
# Objective
- After #9826, there are issues on "run once runners"
- example `without_winit` crashes:
```
2023-10-19T22:06:01.810019Z INFO bevy_render::renderer: AdapterInfo { name: "llvmpipe (LLVM 15.0.7, 256 bits)", vendor: 65541, device: 0, device_type: Cpu, driver: "llvmpipe", driver_info: "Mesa 23.2.1 - kisak-mesa PPA (LLVM 15.0.7)", backend: Vulkan }
2023-10-19T22:06:02.860331Z WARN bevy_audio::audio_output: No audio device found.
2023-10-19T22:06:03.215154Z INFO bevy_diagnostic::system_information_diagnostics_plugin::internal: SystemInfo { os: "Linux 22.04 Ubuntu", kernel: "6.2.0-1014-azure", cpu: "Intel(R) Xeon(R) CPU E5-2673 v3 @ 2.40GHz", core_count: "2", memory: "6.8 GiB" }
thread 'main' panicked at crates/bevy_render/src/pipelined_rendering.rs:91:14:
Unable to get RenderApp. Another plugin may have removed the RenderApp before PipelinedRenderingPlugin
note: run with `RUST_BACKTRACE=1` environment variable to display a backtrace
```
- example `headless` runs the app twice with the `run_once` schedule
## Solution
- Expose a more complex state of an app than just "ready"
- Also block adding plugins to an app after it has finished or cleaned
up its plugins as that wouldn't work anyway
## Migration Guide
* `app.ready()` has been replaced by `app.plugins_state()` which will
return more details on the current state of plugins in the app
# Objective
- Replace md5 by another hasher, as suggested in
https://github.com/bevyengine/bevy/pull/8624#discussion_r1359291028
- md5 is not secure, and is slow. use something more secure and faster
## Solution
- Replace md5 by blake3
Putting this PR in the 0.12 as once it's released, changing the hash
algorithm will be a painful breaking change
# Objective
Even at `reflectance == 0.0`, our ambient and environment map light
implementations still produce fresnel/specular highlights.
Such a low `reflectance` value lies outside of the physically possible
range and is already used by our directional, point and spot light
implementations (via the `fresnel()` function) to enable artistic
control, effectively disabling the fresnel "look" for non-physically
realistic materials. Since ambient and environment lights use a
different formulation, they were not honoring this same principle.
This PR aims to bring consistency to all light types, offering the same
fresnel extinguishing control to ambient and environment lights.
Thanks to `@nathanf` for [pointing
out](https://discord.com/channels/691052431525675048/743663924229963868/1164083373514440744)
the [Filament docs section about
this](https://google.github.io/filament/Filament.md.html#lighting/occlusion/specularocclusion).
## Solution
- We use [the same
formulation](ffc572728f/crates/bevy_pbr/src/render/pbr_lighting.wgsl (L99))
already used by the `fresnel()` function in `bevy_pbr::lighting` to
modulate the F90, to modulate the specular component of Ambient and
Environment Map lights.
## Comparison
⚠️ **Modified version of the PBR example for demo purposes, that shows
reflectance (_NOT_ part of this PR)** ⚠️
Also, keep in mind this is a very subtle difference (look for the
fresnel highlights on the lower left spheres, you might need to zoom in.
### Before
<img width="1392" alt="Screenshot 2023-10-18 at 23 02 25"
src="https://github.com/bevyengine/bevy/assets/418473/ec0efb58-9a98-4377-87bc-726a1b0a3ff3">
### After
<img width="1392" alt="Screenshot 2023-10-18 at 23 01 43"
src="https://github.com/bevyengine/bevy/assets/418473/a2809325-5728-405e-af02-9b5779767843">
---
## Changelog
- Ambient and Environment Map lights will now honor values of
`reflectance` that are below the physically possible range (⪅ 0.35) by
extinguishing their fresnel highlights. (Just like point, directional
and spot lights already did.) This allows for more consistent artistic
control and for non-physically realistic looks with all light types.
## Migration Guide
- If Fresnel highlights from Ambient and Environment Map lights are no
longer visible in your materials, make sure you're using a higher,
physically plausible value of `reflectance` (⪆ 0.35).
# Objective
- I want to use the `debug_glam_assert` feature with bevy.
## Solution
- Re-export the feature flag
---
## Changelog
- Re-export `debug_glam_assert` feature flag from glam.
# Objective
Fixes#5101
Alternative to #6511
## Solution
Corrected the behavior for ignored fields in `FromReflect`, which was
previously using the incorrect field indexes.
Similarly, fields marked with `#[reflect(skip_serializing)]` no longer
break when using `FromReflect` after deserialization. This was done by
modifying `SerializationData` to store a function pointer that can later
be used to generate a default instance of the skipped field during
deserialization.
The function pointer points to a function generated by the derive macro
using the behavior designated by `#[reflect(default)]` (or just
`Default` if none provided). The entire output of the macro is now
wrapped in an [unnamed
constant](https://doc.rust-lang.org/stable/reference/items/constant-items.html#unnamed-constant)
which keeps this behavior hygienic.
#### Rationale
The biggest downside to this approach is that it requires fields marked
`#[reflect(skip_serializing)]` to provide the ability to create a
default instance— either via a `Default` impl or by specifying a custom
one. While this isn't great, I think it might be justified by the fact
that we really need to create this value when using `FromReflect` on a
deserialized object. And we need to do this _during_ deserialization
because after that (at least for tuples and tuple structs) we lose
information about which field is which: _"is the value at index 1 in
this `DynamicTupleStruct` the actual value for index 1 or is it really
the value for index 2 since index 1 is skippable...?"_
#### Alternatives
An alternative would be to store `Option<Box<dyn Reflect>>` within
`DynamicTuple` and `DynamicTupleStruct` instead of just `Box<dyn
Reflect>`. This would allow us to insert "empty"/"missing" fields during
deserialization, thus saving the positional information of the skipped
fields. However, this may require changing the API of `Tuple` and
`TupleStruct` such that they can account for their dynamic counterparts
returning `None` for a skipped field. In practice this would probably
mean exposing the `Option`-ness of the dynamics onto implementors via
methods like `Tuple::drain` or `TupleStruct::field`.
Personally, I think requiring `Default` would be better than muddying up
the API to account for these special cases. But I'm open to trying out
this other approach if the community feels that it's better.
---
## Changelog
### Public Changes
#### Fixed
- The behaviors of `#[reflect(ignore)]` and
`#[reflect(skip_serializing)]` are no longer dependent on field order
#### Changed
- Fields marked with `#[reflect(skip_serializing)]` now need to either
implement `Default` or specify a custom default function using
`#[reflect(default = "path::to::some_func")]`
- Deserializing a type with fields marked `#[reflect(skip_serializing)]`
will now include that field initialized to its specified default value
- `SerializationData::new` now takes the new `SkippedField` struct along
with the skipped field index
- Renamed `SerializationData::is_ignored_field` to
`SerializationData::is_field_skipped`
#### Added
- Added `SkippedField` struct
- Added methods `SerializationData::generate_default` and
`SerializationData::iter_skipped`
### Internal Changes
#### Changed
- Replaced `members_to_serialization_denylist` and `BitSet<u32>` with
`SerializationDataDef`
- The `Reflect` derive is more hygienic as it now outputs within an
[unnamed
constant](https://doc.rust-lang.org/stable/reference/items/constant-items.html#unnamed-constant)
- `StructField::index` has been split up into
`StructField::declaration_index` and `StructField::reflection_index`
#### Removed
- Removed `bitset` dependency
## Migration Guide
* Fields marked `#[reflect(skip_serializing)]` now must implement
`Default` or specify a custom default function with `#[reflect(default =
"path::to::some_func")]`
```rust
#[derive(Reflect)]
struct MyStruct {
#[reflect(skip_serializing)]
#[reflect(default = "get_foo_default")]
foo: Foo, // <- `Foo` does not impl `Default` so requires a custom
function
#[reflect(skip_serializing)]
bar: Bar, // <- `Bar` impls `Default`
}
#[derive(Reflect)]
struct Foo(i32);
#[derive(Reflect, Default)]
struct Bar(i32);
fn get_foo_default() -> Foo {
Foo(123)
}
```
* `SerializationData::new` has been changed to expect an iterator of
`(usize, SkippedField)` rather than one of just `usize`
```rust
// BEFORE
SerializationData::new([0, 3].into_iter());
// AFTER
SerializationData::new([
(0, SkippedField::new(field_0_default_fn)),
(3, SkippedField::new(field_3_default_fn)),
].into_iter());
```
* `Serialization::is_ignored_field` has been renamed to
`Serialization::is_field_skipped`
* Fields marked `#[reflect(skip_serializing)]` are now included in
deserialization output. This may affect logic that expected those fields
to be absent.
# Objective
To get the width or height of an image you do:
```rust
self.texture_descriptor.size.{width, height}
```
that is quite verbose.
This PR adds some convenient methods for Image to reduce verbosity.
## Changelog
* Add a `width()` method for getting the width of an image.
* Add a `height()` method for getting the height of an image.
* Rename the `size()` method to `size_f32()`.
* Add a `size()` method for getting the size of an image as u32.
* Renamed the `aspect_2d()` method to `aspect_ratio()`.
## Migration Guide
Replace calls to the `Image::size()` method with `size_f32()`.
Replace calls to the `Image::aspect_2d()` method with `aspect_ratio()`.
# Objective
- Fix#10165
- On iOS simulator on apple silicon Macs, shader validation is going
through the host, but device limits are reported for the device. They
sometimes differ, and cause the validation to crash on something that
should work
```
-[MTLDebugRenderCommandEncoder validateCommonDrawErrors:]:5775: failed assertion `Draw Errors Validation
Fragment Function(fragment_): the offset into the buffer _naga_oil_mod_MJSXM6K7OBRHEOR2NVSXG2C7OZUWK527MJUW4ZDJNZTXG_memberfog that is bound at buffer index 6 must be a multiple of 256 but was set to 448.
```
## Solution
- Add a custom flag when building for the simulator and override the
buffer alignment
# Objective
- Closes#10049.
- Detect DDS texture containing a cubemap or a cubemap array.
## Solution
- When loading a dds texture, the header capabilities are checked for
the cubemap flag. An error is returned if not all faces are provided.
---
## Changelog
### Added
- Added a new texture error `TextureError::IncompleteCubemap`, used for
dds cubemap textures containing less than 6 faces, as that is not
supported on modern graphics APIs.
### Fixed
- DDS cubemaps are now loaded as cubemaps instead of 2D textures.
## Migration Guide
If you are matching on a `TextureError`, you will need to add a new
branch to handle `TextureError::IncompleteCubemap`.
# Objective
While reviewing #10187 I noticed some other mistakes in the UI node
docs.
## Solution
I did a quick proofreading pass and fixed a few things. And of course,
the typo from that other PR.
## Notes
I occasionally insert a period to make a section of doc self-consistent
but didn't go one way or the other on all periods in the file.
---------
Co-authored-by: Noah <noahshomette@gmail.com>
# Objective
Simplify bind group creation code. alternative to (and based on) #9476
## Solution
- Add a `BindGroupEntries` struct that can transparently be used where
`&[BindGroupEntry<'b>]` is required in BindGroupDescriptors.
Allows constructing the descriptor's entries as:
```rust
render_device.create_bind_group(
"my_bind_group",
&my_layout,
&BindGroupEntries::with_indexes((
(2, &my_sampler),
(3, my_uniform),
)),
);
```
instead of
```rust
render_device.create_bind_group(
"my_bind_group",
&my_layout,
&[
BindGroupEntry {
binding: 2,
resource: BindingResource::Sampler(&my_sampler),
},
BindGroupEntry {
binding: 3,
resource: my_uniform,
},
],
);
```
or
```rust
render_device.create_bind_group(
"my_bind_group",
&my_layout,
&BindGroupEntries::sequential((&my_sampler, my_uniform)),
);
```
instead of
```rust
render_device.create_bind_group(
"my_bind_group",
&my_layout,
&[
BindGroupEntry {
binding: 0,
resource: BindingResource::Sampler(&my_sampler),
},
BindGroupEntry {
binding: 1,
resource: my_uniform,
},
],
);
```
the structs has no user facing macros, is tuple-type-based so stack
allocated, and has no noticeable impact on compile time.
- Also adds a `DynamicBindGroupEntries` struct with a similar api that
uses a `Vec` under the hood and allows extending the entries.
- Modifies `RenderDevice::create_bind_group` to take separate arguments
`label`, `layout` and `entries` instead of a `BindGroupDescriptor`
struct. The struct can't be stored due to the internal references, and
with only 3 members arguably does not add enough context to justify
itself.
- Modify the codebase to use the new api and the `BindGroupEntries` /
`DynamicBindGroupEntries` structs where appropriate (whenever the
entries slice contains more than 1 member).
## Migration Guide
- Calls to `RenderDevice::create_bind_group({BindGroupDescriptor {
label, layout, entries })` must be amended to
`RenderDevice::create_bind_group(label, layout, entries)`.
- If `label`s have been specified as `"bind_group_name".into()`, they
need to change to just `"bind_group_name"`. `Some("bind_group_name")`
and `None` will still work, but `Some("bind_group_name")` can optionally
be simplified to just `"bind_group_name"`.
---------
Co-authored-by: IceSentry <IceSentry@users.noreply.github.com>
# Objective
- bump naga_oil to 0.10
- update shader imports to use rusty syntax
## Migration Guide
naga_oil 0.10 reworks the import mechanism to support more syntax to
make it more rusty, and test for item use before importing to determine
which imports are modules and which are items, which allows:
- use rust-style imports
```
#import bevy_pbr::{
pbr_functions::{alpha_discard as discard, apply_pbr_lighting},
mesh_bindings,
}
```
- import partial paths:
```
#import part::of::path
...
path::remainder::function();
```
which will call to `part::of::path::remainder::function`
- use fully qualified paths without importing:
```
// #import bevy_pbr::pbr_functions
bevy_pbr::pbr_functions::pbr()
```
- use imported items without qualifying
```
#import bevy_pbr::pbr_functions::pbr
// for backwards compatibility the old style is still supported:
// #import bevy_pbr::pbr_functions pbr
...
pbr()
```
- allows most imported items to end with `_` and numbers (naga_oil#30).
still doesn't allow struct members to end with `_` or numbers but it's
progress.
- the vast majority of existing shader code will work without changes,
but will emit "deprecated" warnings for old-style imports. these can be
suppressed with the `allow-deprecated` feature.
- partly breaks overrides (as far as i'm aware nobody uses these yet) -
now overrides will only be applied if the overriding module is added as
an additional import in the arguments to `Composer::make_naga_module` or
`Composer::add_composable_module`. this is necessary to support
determining whether imports are modules or items.
# Objective
This PR aims to make it so that we don't accidentally go over
`MAX_TEXTURE_IMAGE_UNITS` (in WebGL) or
`maxSampledTexturesPerShaderStage` (in WebGPU), giving us some extra
leeway to add more view bind group textures.
(This PR is extracted from—and unblocks—#8015)
## Solution
- We replace the existing `view_layout` and `view_layout_multisampled`
pair with an array of 32 bind group layouts, generated ahead of time;
- For now, these layouts cover all the possible combinations of:
`multisampled`, `depth_prepass`, `normal_prepass`,
`motion_vector_prepass` and `deferred_prepass`:
- In the future, as @JMS55 pointed out, we can likely take out
`motion_vector_prepass` and `deferred_prepass`, as these are not really
needed for the mesh pipeline and can use separate pipelines. This would
bring the possible combinations down to 8;
- We can also add more "optional" textures as they become needed,
allowing the engine to scale to a wider variety of use cases in lower
end/web environments (e.g. some apps might just want normal and depth
prepasses, others might only want light probes), while still keeping a
high ceiling for high end native environments where more textures are
supported.
- While preallocating bind group layouts is relatively cheap, the number
of combinations grows exponentially, so we should likely limit ourselves
to something like at most 256–1024 total layouts until we find a better
solution (like generating them lazily)
- To make this mechanism a little bit more explicit/discoverable, so
that compatibility with WebGPU/WebGL is not broken by accident, we add a
`MESH_PIPELINE_VIEW_LAYOUT_SAFE_MAX_TEXTURES` const and warn whenever
the number of textures in the layout crosses it.
- The warning is gated by `#[cfg(debug_assertions)]` and not issued in
release builds;
- We're counting the actual textures in the bind group layout instead of
using some roundabout metric so it should be accurate;
- Right now `MESH_PIPELINE_VIEW_LAYOUT_SAFE_MAX_TEXTURES` is set to 10
in order to leave 6 textures free for other groups;
- Currently there's no combination that would cause us to go over the
limit, but that will change once #8015 lands.
---
## Changelog
- `MeshPipeline` view bind group layouts now vary based on the current
multisampling and prepass states, saving a couple of texture binding
entries when prepasses are not in use.
## Migration Guide
- `MeshPipeline::view_layout` and
`MeshPipeline::view_layout_multisampled` have been replaced with a
private array to accomodate for variable view bind group layouts. To
obtain a view bind group layout for the current pipeline state, use the
new `MeshPipeline::get_view_layout()` or
`MeshPipeline::get_view_layout_from_key()` methods.
