# Objective
- Closes#15752
Calling the functions `App::observe` and `World::observe` doesn't make
sense because you're not "observing" the `App` or `World`, you're adding
an observer that listens for an event that occurs *within* the `World`.
We should rename them to better fit this.
## Solution
Renames:
- `App::observe` -> `App::add_observer`
- `World::observe` -> `World::add_observer`
- `Commands::observe` -> `Commands::add_observer`
- `EntityWorldMut::observe_entity` -> `EntityWorldMut::observe`
(Note this isn't a breaking change as the original rename was introduced
earlier this cycle.)
## Testing
Reusing current tests.
# Objective
- Fixes#15285
## Solution
`winit` sends resized to zero events when the window is minimized only
on Windows OS(rust-windowing/winit#2015).
This makes updating window viewport size to `(0, 0)` and panicking when
calculating aspect ratio.
~~So, just skip these kinds of events - resizing to (0, 0) when the
window is minimized - on Windows OS~~
Idially, the camera extraction excludes the cameras whose target size
width or height is zero here;
25bfa80e60/crates/bevy_render/src/camera/camera.rs (L1060-L1074)
but it seems that winit event loop sends resize events after extraction
and before post update schedule, so they might panics before the
extraction filters them out.
Alternatively, it might be possible to change event loop evaluating
order or defer them to the right schedule but I'm afraid that it might
cause some breaking changes, so just skip rendering logics for such
windows and they will be all filtered out by the extractions on the next
frame and thereafter.
## Testing
Running the example in the original issue and minimizing causes panic,
or just running `tests/window/minimising.rs` with `cargo run --example
minimising` panics without this PR and doesn't panics with this PR.
I think that we should run it in CI on Windows OS btw
# Objective
- Fixes (partially) #15701.
## Solution
- Use little-endian bytes over native-endian bytes where applicable.
## Testing
- Ran CI.
## Open Questions
- Should we config-gate these for big-endian targets? It looks like
there are [very few
targets](https://doc.rust-lang.org/nightly/rustc/platform-support.html)
that use big-endian.
# Objective
Fixes#15560
Fixes (most of) #15570
Currently a lot of examples (and presumably some user code) depend on
toggling certain render features by adding/removing a single component
to an entity, e.g. `SpotLight` to toggle a light. Because of the
retained render world this no longer works: Extract will add any new
components, but when it is removed the entity persists unchanged in the
render world.
## Solution
Add `SyncComponentPlugin<C: Component>` that registers
`SyncToRenderWorld` as a required component for `C`, and adds a
component hook that will clear all components from the render world
entity when `C` is removed. We add this plugin to
`ExtractComponentPlugin` which fixes most instances of the problem. For
custom extraction logic we can manually add `SyncComponentPlugin` for
that component.
We also rename `WorldSyncPlugin` to `SyncWorldPlugin` so we start a
naming convention like all the `Extract` plugins.
In this PR I also fixed a bunch of breakage related to the retained
render world, stemming from old code that assumed that `Entity` would be
the same in both worlds.
I found that using the `RenderEntity` wrapper instead of `Entity` in
data structures when referring to render world entities makes intent
much clearer, so I propose we make this an official pattern.
## Testing
Run examples like
```
cargo run --features pbr_multi_layer_material_textures --example clearcoat
cargo run --example volumetric_fog
```
and see that they work, and that toggles work correctly. But really we
should test every single example, as we might not even have caught all
the breakage yet.
---
## Migration Guide
The retained render world notes should be updated to explain this edge
case and `SyncComponentPlugin`
---------
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
Co-authored-by: Trashtalk217 <trashtalk217@gmail.com>
The previous fixes were breaking pretty much everything on main due to
naga-oil complaining about the OIT shader not being loaded, since
apparently webgl is a default feature. This fix is a bit messier, but
properly warns the user and is probably what we should have gone for in
the first place.
# Objective
Bevy supports feature gates for each format it supports, but several
formats that it loads via the `image` crate do not have feature gates.
Additionally, the QOI format is supported by the `image` crate and
wasn't available at all. This fixes that.
## Solution
The following feature gates are added:
* `avif`
* `ff` (Farbfeld)
* `gif`
* `ico`
* `qoi`
* `tiff`
None of these formats are enabled by default, despite the fact that all
these formats appeared to be enabled by default before. Since
`default-features` was disabled for the `image` crate, it's likely that
using any of these formats would have errored by default before this
change, although this probably needs additional testing.
## Testing
The changes seemed minimal enough that a compile test would be
sufficient.
## Migration guide
Image formats that previously weren't feature-gated are now
feature-gated, meaning they will have to be enabled if you use them:
* `avif`
* `ff` (Farbfeld)
* `gif`
* `ico`
* `tiff`
Additionally, the `qoi` feature has been added to support loading QOI
format images.
Previously, these formats appeared in the enum by default, but weren't
actually enabled via the `image` crate, potentially resulting in weird
bugs. Now, you should be able to add these features to your projects to
support them properly.
# Objective
After merging retained rendering world #15320, we now have a good way of
creating a link between worlds (*HIYAA intensifies*). This means that
`get_or_spawn` is no longer necessary for that function. Entity should
be opaque as the warning above `get_or_spawn` says. This is also part of
#15459.
I'm deprecating `get_or_spawn_batch` in a different PR in order to keep
the PR small in size.
## Solution
Deprecate `get_or_spawn` and replace it with `get_entity` in most
contexts. If it's possible to query `&RenderEntity`, then the entity is
synced and `render_entity.id()` is initialized in the render world.
## Migration Guide
If you are given an `Entity` and you want to do something with it, use
`Commands.entity(...)` or `World.entity(...)`. If instead you want to
spawn something use `Commands.spawn(...)` or `World.spawn(...)`. If you
are not sure if an entity exists, you can always use `get_entity` and
match on the `Option<...>` that is returned.
---------
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
# Objective
Following the pattern established in #15593, we can reduce the API
surface of `World` by providing a single function to grab both a
singular entity reference, or multiple entity references.
## Solution
The following functions can now also take multiple entity IDs and will
return multiple entity references back:
- `World::entity`
- `World::get_entity`
- `World::entity_mut`
- `World::get_entity_mut`
- `DeferredWorld::entity_mut`
- `DeferredWorld::get_entity_mut`
If you pass in X, you receive Y:
- give a single `Entity`, receive a single `EntityRef`/`EntityWorldMut`
(matches current behavior)
- give a `[Entity; N]`/`&[Entity; N]` (array), receive an equally-sized
`[EntityRef; N]`/`[EntityMut; N]`
- give a `&[Entity]` (slice), receive a
`Vec<EntityRef>`/`Vec<EntityMut>`
- give a `&EntityHashSet`, receive a
`EntityHashMap<EntityRef>`/`EntityHashMap<EntityMut>`
Note that `EntityWorldMut` is only returned in the single-entity case,
because having multiple at the same time would lead to UB. Also,
`DeferredWorld` receives an `EntityMut` in the single-entity case
because it does not allow structural access.
## Testing
- Added doc-tests on `World::entity`, `World::entity_mut`, and
`DeferredWorld::entity_mut`
- Added tests for aliased mutability and entity existence
---
## Showcase
<details>
<summary>Click to view showcase</summary>
The APIs for fetching `EntityRef`s and `EntityMut`s from the `World`
have been unified.
```rust
// This code will be referred to by subsequent code blocks.
let world = World::new();
let e1 = world.spawn_empty().id();
let e2 = world.spawn_empty().id();
let e3 = world.spawn_empty().id();
```
Querying for a single entity remains mostly the same:
```rust
// 0.14
let eref: EntityRef = world.entity(e1);
let emut: EntityWorldMut = world.entity_mut(e1);
let eref: Option<EntityRef> = world.get_entity(e1);
let emut: Option<EntityWorldMut> = world.get_entity_mut(e1);
// 0.15
let eref: EntityRef = world.entity(e1);
let emut: EntityWorldMut = world.entity_mut(e1);
let eref: Result<EntityRef, Entity> = world.get_entity(e1);
let emut: Result<EntityWorldMut, Entity> = world.get_entity_mut(e1);
```
Querying for multiple entities with an array has changed:
```rust
// 0.14
let erefs: [EntityRef; 2] = world.many_entities([e1, e2]);
let emuts: [EntityMut; 2] = world.many_entities_mut([e1, e2]);
let erefs: Result<[EntityRef; 2], Entity> = world.get_many_entities([e1, e2]);
let emuts: Result<[EntityMut; 2], QueryEntityError> = world.get_many_entities_mut([e1, e2]);
// 0.15
let erefs: [EntityRef; 2] = world.entity([e1, e2]);
let emuts: [EntityMut; 2] = world.entity_mut([e1, e2]);
let erefs: Result<[EntityRef; 2], Entity> = world.get_entity([e1, e2]);
let emuts: Result<[EntityMut; 2], EntityFetchError> = world.get_entity_mut([e1, e2]);
```
Querying for multiple entities with a slice has changed:
```rust
let ids = vec![e1, e2, e3]);
// 0.14
let erefs: Result<Vec<EntityRef>, Entity> = world.get_many_entities_dynamic(&ids[..]);
let emuts: Result<Vec<EntityMut>, QueryEntityError> = world.get_many_entities_dynamic_mut(&ids[..]);
// 0.15
let erefs: Result<Vec<EntityRef>, Entity> = world.get_entity(&ids[..]);
let emuts: Result<Vec<EntityMut>, EntityFetchError> = world.get_entity_mut(&ids[..]);
let erefs: Vec<EntityRef> = world.entity(&ids[..]); // Newly possible!
let emuts: Vec<EntityMut> = world.entity_mut(&ids[..]); // Newly possible!
```
Querying for multiple entities with an `EntityHashSet` has changed:
```rust
let set = EntityHashSet::from_iter([e1, e2, e3]);
// 0.14
let emuts: Result<Vec<EntityMut>, QueryEntityError> = world.get_many_entities_from_set_mut(&set);
// 0.15
let emuts: Result<EntityHashMap<EntityMut>, EntityFetchError> = world.get_entity_mut(&set);
let erefs: Result<EntityHashMap<EntityRef>, EntityFetchError> = world.get_entity(&set); // Newly possible!
let emuts: EntityHashMap<EntityMut> = world.entity_mut(&set); // Newly possible!
let erefs: EntityHashMap<EntityRef> = world.entity(&set); // Newly possible!
```
</details>
## Migration Guide
- `World::get_entity` now returns `Result<_, Entity>` instead of
`Option<_>`.
- Use `world.get_entity(..).ok()` to return to the previous behavior.
- `World::get_entity_mut` and `DeferredWorld::get_entity_mut` now return
`Result<_, EntityFetchError>` instead of `Option<_>`.
- Use `world.get_entity_mut(..).ok()` to return to the previous
behavior.
- Type inference for `World::entity`, `World::entity_mut`,
`World::get_entity`, `World::get_entity_mut`,
`DeferredWorld::entity_mut`, and `DeferredWorld::get_entity_mut` has
changed, and might now require the input argument's type to be
explicitly written when inside closures.
- The following functions have been deprecated, and should be replaced
as such:
- `World::many_entities` -> `World::entity::<[Entity; N]>`
- `World::many_entities_mut` -> `World::entity_mut::<[Entity; N]>`
- `World::get_many_entities` -> `World::get_entity::<[Entity; N]>`
- `World::get_many_entities_dynamic` -> `World::get_entity::<&[Entity]>`
- `World::get_many_entities_mut` -> `World::get_entity_mut::<[Entity;
N]>`
- The equivalent return type has changed from `Result<_,
QueryEntityError>` to `Result<_, EntityFetchError>`
- `World::get_many_entities_dynamic_mut` ->
`World::get_entity_mut::<&[Entity]>1
- The equivalent return type has changed from `Result<_,
QueryEntityError>` to `Result<_, EntityFetchError>`
- `World::get_many_entities_from_set_mut` ->
`World::get_entity_mut::<&EntityHashSet>`
- The equivalent return type has changed from `Result<Vec<EntityMut>,
QueryEntityError>` to `Result<EntityHashMap<EntityMut>,
EntityFetchError>`. If necessary, you can still convert the
`EntityHashMap` into a `Vec`.
# Objective
- `bevy_render` should not depend on `bevy_winit`
- Fixes#15565
## Solution
- `bevy_render` no longer depends on `bevy_winit`
- The following is behind the `custom_cursor` feature
- Move custom cursor code from `bevy_render` to `bevy_winit` behind the
`custom_cursor` feature
- `bevy_winit` now depends on `bevy_render` (for `Image` and
`TextureFormat`)
- `bevy_winit` now depends on `bevy_asset` (for `Assets`, `Handle` and
`AssetId`)
- `bevy_winit` now depends on `bytemuck` (already in tree)
- Custom cursor code in `bevy_winit` reworked to use `AssetId` (other
than that it is taken over 1:1)
- Rework `bevy_winit` custom cursor interface visibility now that the
logic is all contained in `bevy_winit`
## Testing
- I ran the screenshot and window_settings examples
- Tested on linux wayland so far
---
## Migration Guide
`CursorIcon` and `CustomCursor` previously provided by
`bevy::render::view::cursor` is now available from `bevy::winit`.
A new feature `custom_cursor` enables this functionality (default
feature).
# Objective
- bevy_render is gargantuan
## Solution
- Split out bevy_mesh
## Testing
- Ran some examples, everything looks fine
## Migration Guide
`bevy_render::mesh::morph::inherit_weights` is now
`bevy_render::mesh::inherit_weights`
if you were using `Mesh::compute_aabb`, you will need to `use
bevy_render::mesh::MeshAabb;` now
---------
Co-authored-by: Joona Aalto <jondolf.dev@gmail.com>
# Objective
Yet another PR for migrating stuff to required components. This time,
cameras!
## Solution
As per the [selected
proposal](https://hackmd.io/tsYID4CGRiWxzsgawzxG_g#Combined-Proposal-1-Selected),
deprecate `Camera2dBundle` and `Camera3dBundle` in favor of `Camera2d`
and `Camera3d`.
Adding a `Camera` without `Camera2d` or `Camera3d` now logs a warning,
as suggested by Cart [on
Discord](https://discord.com/channels/691052431525675048/1264881140007702558/1291506402832945273).
I would personally like cameras to work a bit differently and be split
into a few more components, to avoid some footguns and confusing
semantics, but that is more controversial, and shouldn't block this core
migration.
## Testing
I ran a few 2D and 3D examples, and tried cameras with and without
render graphs.
---
## Migration Guide
`Camera2dBundle` and `Camera3dBundle` have been deprecated in favor of
`Camera2d` and `Camera3d`. Inserting them will now also insert the other
components required by them automatically.
# Objective
- Another step towards #15558
## Solution
- Instead of allocating a Vec and then having wgpu copy it into a
staging buffer, write directly into the staging buffer.
- gets rid of another hidden copy, in `pad_to_alignment`.
future work:
- why is there a gcd implementation in here (and its subpar, use
binary_gcd. its in the hot path, run twice for every mesh, every frame i
think?) make it better and put it in bevy_math
- zero-copy custom mesh api to avoid having to write out a Mesh from a
custom rep
## Testing
- lighting and many_cubes run fine (and slightly faster. havent
benchmarked though)
---
## Showcase
- look ma... no copies
at least when RenderAssetUsage is GPU only :3
---------
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
Co-authored-by: Kristoffer Søholm <k.soeholm@gmail.com>
# Objective
System param validation warnings should be configurable and default to
"warn once" (per system).
Fixes: #15391
## Solution
`SystemMeta` is given a new `ParamWarnPolicy` field.
The policy decides whether warnings will be emitted by each system param
when it fails validation.
The policy is updated by the system after param validation fails.
Example warning:
```
2024-09-30T18:10:04.740749Z WARN bevy_ecs::system::function_system: System fallible_params::do_nothing_fail_validation will not run because it requested inaccessible system parameter Single<(), (With<Player>, With<Enemy>)>
```
Currently, only the first invalid parameter is displayed.
Warnings can be disabled on function systems using
`.param_never_warn()`.
(there is also `.with_param_warn_policy(policy)`)
## Testing
Ran `fallible_params` example.
---------
Co-authored-by: SpecificProtagonist <vincentjunge@posteo.net>
As discussed in #15521
- Partial revert of #14897, reverting the change to the methods to
consume `self`
- The `insert_if` method is kept
The migration guide of #14897 should be removed
Closes#15521
---------
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
# Objective
A big step in the migration to required components: meshes and
materials!
## Solution
As per the [selected
proposal](https://hackmd.io/@bevy/required_components/%2Fj9-PnF-2QKK0on1KQ29UWQ):
- Deprecate `MaterialMesh2dBundle`, `MaterialMeshBundle`, and
`PbrBundle`.
- Add `Mesh2d` and `Mesh3d` components, which wrap a `Handle<Mesh>`.
- Add `MeshMaterial2d<M: Material2d>` and `MeshMaterial3d<M: Material>`,
which wrap a `Handle<M>`.
- Meshes *without* a mesh material should be rendered with a default
material. The existence of a material is determined by
`HasMaterial2d`/`HasMaterial3d`, which is required by
`MeshMaterial2d`/`MeshMaterial3d`. This gets around problems with the
generics.
Previously:
```rust
commands.spawn(MaterialMesh2dBundle {
mesh: meshes.add(Circle::new(100.0)).into(),
material: materials.add(Color::srgb(7.5, 0.0, 7.5)),
transform: Transform::from_translation(Vec3::new(-200., 0., 0.)),
..default()
});
```
Now:
```rust
commands.spawn((
Mesh2d(meshes.add(Circle::new(100.0))),
MeshMaterial2d(materials.add(Color::srgb(7.5, 0.0, 7.5))),
Transform::from_translation(Vec3::new(-200., 0., 0.)),
));
```
If the mesh material is missing, previously nothing was rendered. Now,
it renders a white default `ColorMaterial` in 2D and a
`StandardMaterial` in 3D (this can be overridden). Below, only every
other entity has a material:
Why white? This is still open for discussion, but I think white makes
sense for a *default* material, while *invalid* asset handles pointing
to nothing should have something like a pink material to indicate that
something is broken (I don't handle that in this PR yet). This is kind
of a mix of Godot and Unity: Godot just renders a white material for
non-existent materials, while Unity renders nothing when no materials
exist, but renders pink for invalid materials. I can also change the
default material to pink if that is preferable though.
## Testing
I ran some 2D and 3D examples to test if anything changed visually. I
have not tested all examples or features yet however. If anyone wants to
test more extensively, it would be appreciated!
## Implementation Notes
- The relationship between `bevy_render` and `bevy_pbr` is weird here.
`bevy_render` needs `Mesh3d` for its own systems, but `bevy_pbr` has all
of the material logic, and `bevy_render` doesn't depend on it. I feel
like the two crates should be refactored in some way, but I think that's
out of scope for this PR.
- I didn't migrate meshlets to required components yet. That can
probably be done in a follow-up, as this is already a huge PR.
- It is becoming increasingly clear to me that we really, *really* want
to disallow raw asset handles as components. They caused me a *ton* of
headache here already, and it took me a long time to find every place
that queried for them or inserted them directly on entities, since there
were no compiler errors for it. If we don't remove the `Component`
derive, I expect raw asset handles to be a *huge* footgun for users as
we transition to wrapper components, especially as handles as components
have been the norm so far. I personally consider this to be a blocker
for 0.15: we need to migrate to wrapper components for asset handles
everywhere, and remove the `Component` derive. Also see
https://github.com/bevyengine/bevy/issues/14124.
---
## Migration Guide
Asset handles for meshes and mesh materials must now be wrapped in the
`Mesh2d` and `MeshMaterial2d` or `Mesh3d` and `MeshMaterial3d`
components for 2D and 3D respectively. Raw handles as components no
longer render meshes.
Additionally, `MaterialMesh2dBundle`, `MaterialMeshBundle`, and
`PbrBundle` have been deprecated. Instead, use the mesh and material
components directly.
Previously:
```rust
commands.spawn(MaterialMesh2dBundle {
mesh: meshes.add(Circle::new(100.0)).into(),
material: materials.add(Color::srgb(7.5, 0.0, 7.5)),
transform: Transform::from_translation(Vec3::new(-200., 0., 0.)),
..default()
});
```
Now:
```rust
commands.spawn((
Mesh2d(meshes.add(Circle::new(100.0))),
MeshMaterial2d(materials.add(Color::srgb(7.5, 0.0, 7.5))),
Transform::from_translation(Vec3::new(-200., 0., 0.)),
));
```
If the mesh material is missing, a white default material is now used.
Previously, nothing was rendered if the material was missing.
The `WithMesh2d` and `WithMesh3d` query filter type aliases have also
been removed. Simply use `With<Mesh2d>` or `With<Mesh3d>`.
---------
Co-authored-by: Tim Blackbird <justthecooldude@gmail.com>
Co-authored-by: Carter Anderson <mcanders1@gmail.com>
# Objective
- First step towards #15558
## Solution
- Rename `get_vertex_buffer_data` to `create_packed_vertex_buffer_data`
to make it clear that it is not "free" and actually allocates
- Compute length analytically for preallocation instead of creating the
buffer to get its length and immediately discard it
- Use existing vertex attribute size calculation method to reduce code
duplication
- Fix a bug where mesh index data was being replaced by unnecessarily
newly created mesh vertex data in some cases
- Overall reduces mesh copies by two. We still have plenty to go, but
these were the easy ones.
## Testing
- I ran 3d_scene, lighting, and many_cubes, they look fine.
- Benchmarks would be nice, but this is very obviously a win in perf and
correctness.
---
## Migration Guide
- `Mesh::create_packed_vertex_buffer_data` has been renamed
`Mesh::create_packed_vertex_buffer_data` to reflect the fact that it
copies data and allocates.
## Showcase
- look mom, less copies
# Objective
- This PR fixes#12488
## Solution
- This PR adds a new property to `Camera` that emulates the
functionality of the
[setViewOffset()](https://threejs.org/docs/#api/en/cameras/PerspectiveCamera.setViewOffset)
API in three.js.
- When set, the perspective and orthographic projections will restrict
the visible area of the camera to a part of the view frustum defined by
`offset` and `size`.
## Testing
- In the new `camera_sub_view` example, a fixed, moving and control sub
view is created for both perspective and orthographic projection
- Run the example with `cargo run --example camera_sub_view`
- The code can be tested by adding a `SubCameraView` to a camera
---
## Showcase
- Left Half: Perspective Projection
- Right Half: Orthographic Projection
- Small boxes in order:
- Sub view of the left half of the full image
- Sub view moving from the top left to the bottom right of the full
image
- Sub view of the full image (acting as a control)
- Large box: No sub view
<details>
<summary>Shortened camera setup of `camera_sub_view` example</summary>
```rust
// Main perspective Camera
commands.spawn(Camera3dBundle {
transform,
..default()
});
// Perspective camera left half
commands.spawn(Camera3dBundle {
camera: Camera {
sub_camera_view: Some(SubCameraView {
// Set the sub view camera to the left half of the full image
full_size: uvec2(500, 500),
offset: ivec2(0, 0),
size: uvec2(250, 500),
}),
order: 1,
..default()
},
transform,
..default()
});
// Perspective camera moving
commands.spawn((
Camera3dBundle {
camera: Camera {
sub_camera_view: Some(SubCameraView {
// Set the sub view camera to a fifth of the full view and
// move it in another system
full_size: uvec2(500, 500),
offset: ivec2(0, 0),
size: uvec2(100, 100),
}),
order: 2,
..default()
},
transform,
..default()
},
MovingCameraMarker,
));
// Perspective camera control
commands.spawn(Camera3dBundle {
camera: Camera {
sub_camera_view: Some(SubCameraView {
// Set the sub view to the full image, to ensure that it matches
// the projection without sub view
full_size: uvec2(450, 450),
offset: ivec2(0, 0),
size: uvec2(450, 450),
}),
order: 3,
..default()
},
transform,
..default()
});
// Main orthographic camera
commands.spawn(Camera3dBundle {
projection: OrthographicProjection {
...
}
.into(),
camera: Camera {
order: 4,
..default()
},
transform,
..default()
});
// Orthographic camera left half
commands.spawn(Camera3dBundle {
projection: OrthographicProjection {
...
}
.into(),
camera: Camera {
sub_camera_view: Some(SubCameraView {
// Set the sub view camera to the left half of the full image
full_size: uvec2(500, 500),
offset: ivec2(0, 0),
size: uvec2(250, 500),
}),
order: 5,
..default()
},
transform,
..default()
});
// Orthographic camera moving
commands.spawn((
Camera3dBundle {
projection: OrthographicProjection {
...
}
.into(),
camera: Camera {
sub_camera_view: Some(SubCameraView {
// Set the sub view camera to a fifth of the full view and
// move it in another system
full_size: uvec2(500, 500),
offset: ivec2(0, 0),
size: uvec2(100, 100),
}),
order: 6,
..default()
},
transform,
..default()
},
MovingCameraMarker,
));
// Orthographic camera control
commands.spawn(Camera3dBundle {
projection: OrthographicProjection {
...
}
.into(),
camera: Camera {
sub_camera_view: Some(SubCameraView {
// Set the sub view to the full image, to ensure that it matches
// the projection without sub view
full_size: uvec2(450, 450),
offset: ivec2(0, 0),
size: uvec2(450, 450),
}),
order: 7,
..default()
},
transform,
..default()
});
```
</details>
# Objective
Fixes#15541
A bunch of lifetimes were added during the Assets V2 rework, but after
moving to async traits in #12550 they can be elided. That PR mentions
that this might be the case, but apparently it wasn't followed up on at
the time.
~~I ended up grepping for `<'a` and finding a similar case in
`bevy_reflect` which I also fixed.~~ (edit: that one was needed
apparently)
Note that elided lifetimes are unstable in `impl Trait`. If that gets
stabilized then we can elide even more.
## Solution
Remove the extra lifetimes.
## Testing
Everything still compiles. If I have messed something up there is a
small risk that some user code stops compiling, but all the examples
still work at least.
---
## Migration Guide
The traits `AssetLoader`, `AssetSaver` and `Process` traits from
`bevy_asset` now use elided lifetimes. If you implement these then
remove the named lifetime.
- Adopted from #14449
- Still fixes#12144.
## Migration Guide
The retained render world is a complex change: migrating might take one
of a few different forms depending on the patterns you're using.
For every example, we specify in which world the code is run. Most of
the changes affect render world code, so for the average Bevy user who's
using Bevy's high-level rendering APIs, these changes are unlikely to
affect your code.
### Spawning entities in the render world
Previously, if you spawned an entity with `world.spawn(...)`,
`commands.spawn(...)` or some other method in the rendering world, it
would be despawned at the end of each frame. In 0.15, this is no longer
the case and so your old code could leak entities. This can be mitigated
by either re-architecting your code to no longer continuously spawn
entities (like you're used to in the main world), or by adding the
`bevy_render::world_sync::TemporaryRenderEntity` component to the entity
you're spawning. Entities tagged with `TemporaryRenderEntity` will be
removed at the end of each frame (like before).
### Extract components with `ExtractComponentPlugin`
```
// main world
app.add_plugins(ExtractComponentPlugin::<ComponentToExtract>::default());
```
`ExtractComponentPlugin` has been changed to only work with synced
entities. Entities are automatically synced if `ComponentToExtract` is
added to them. However, entities are not "unsynced" if any given
`ComponentToExtract` is removed, because an entity may have multiple
components to extract. This would cause the other components to no
longer get extracted because the entity is not synced.
So be careful when only removing extracted components from entities in
the render world, because it might leave an entity behind in the render
world. The solution here is to avoid only removing extracted components
and instead despawn the entire entity.
### Manual extraction using `Extract<Query<(Entity, ...)>>`
```rust
// in render world, inspired by bevy_pbr/src/cluster/mod.rs
pub fn extract_clusters(
mut commands: Commands,
views: Extract<Query<(Entity, &Clusters, &Camera)>>,
) {
for (entity, clusters, camera) in &views {
// some code
commands.get_or_spawn(entity).insert(...);
}
}
```
One of the primary consequences of the retained rendering world is that
there's no longer a one-to-one mapping from entity IDs in the main world
to entity IDs in the render world. Unlike in Bevy 0.14, Entity 42 in the
main world doesn't necessarily map to entity 42 in the render world.
Previous code which called `get_or_spawn(main_world_entity)` in the
render world (`Extract<Query<(Entity, ...)>>` returns main world
entities). Instead, you should use `&RenderEntity` and
`render_entity.id()` to get the correct entity in the render world. Note
that this entity does need to be synced first in order to have a
`RenderEntity`.
When performing manual abstraction, this won't happen automatically
(like with `ExtractComponentPlugin`) so add a `SyncToRenderWorld` marker
component to the entities you want to extract.
This results in the following code:
```rust
// in render world, inspired by bevy_pbr/src/cluster/mod.rs
pub fn extract_clusters(
mut commands: Commands,
views: Extract<Query<(&RenderEntity, &Clusters, &Camera)>>,
) {
for (render_entity, clusters, camera) in &views {
// some code
commands.get_or_spawn(render_entity.id()).insert(...);
}
}
// in main world, when spawning
world.spawn(Clusters::default(), Camera::default(), SyncToRenderWorld)
```
### Looking up `Entity` ids in the render world
As previously stated, there's now no correspondence between main world
and render world `Entity` identifiers.
Querying for `Entity` in the render world will return the `Entity` id in
the render world: query for `MainEntity` (and use its `id()` method) to
get the corresponding entity in the main world.
This is also a good way to tell the difference between synced and
unsynced entities in the render world, because unsynced entities won't
have a `MainEntity` component.
---------
Co-authored-by: re0312 <re0312@outlook.com>
Co-authored-by: re0312 <45868716+re0312@users.noreply.github.com>
Co-authored-by: Periwink <charlesbour@gmail.com>
Co-authored-by: Anselmo Sampietro <ans.samp@gmail.com>
Co-authored-by: Emerson Coskey <56370779+ecoskey@users.noreply.github.com>
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
Co-authored-by: Christian Hughes <9044780+ItsDoot@users.noreply.github.com>
# Objective
* Remove all uses of render_resource_wrapper.
* Make it easier to share a `wgpu::Device` between Bevy and application
code.
## Solution
Removed the `render_resource_wrapper` macro.
To improve the `RenderCreation:: Manual ` API, `ErasedRenderDevice` was
replaced by `Arc`. Unfortunately I had to introduce one more usage of
`WgpuWrapper` which seems like an unwanted constraint on the caller.
## Testing
- Did you test these changes? If so, how?
- Ran `cargo test`.
- Ran a few examples.
- Used `RenderCreation::Manual` in my own project
- Exercised `RenderCreation::Automatic` through examples
- Are there any parts that need more testing?
- No
- How can other people (reviewers) test your changes? Is there anything
specific they need to know?
- Run examples
- Use `RenderCreation::Manual` in their own project
# Objective
- Provide a generic and _reflectable_ way to iterate over contained
entities
## Solution
Adds two new traits:
* `VisitEntities`: Reflectable iteration, accepts a closure rather than
producing an iterator. Implemented by default for `IntoIterator`
implementing types. A proc macro is also provided.
* A `Mut` variant of the above. Its derive macro uses the same field
attribute to avoid repetition.
## Testing
Added a test for `VisitEntities` that also transitively tests its derive
macro as well as the default `MapEntities` impl.
# Objective
Adds a new `Readback` component to request for readback of a
`Handle<Image>` or `Handle<ShaderStorageBuffer>` to the CPU in a future
frame.
## Solution
We track the `Readback` component and allocate a target buffer to write
the gpu resource into and map it back asynchronously, which then fires a
trigger on the entity in the main world. This proccess is asynchronous,
and generally takes a few frames.
## Showcase
```rust
let mut buffer = ShaderStorageBuffer::from(vec![0u32; 16]);
buffer.buffer_description.usage |= BufferUsages::COPY_SRC;
let buffer = buffers.add(buffer);
commands
.spawn(Readback::buffer(buffer.clone()))
.observe(|trigger: Trigger<ReadbackComplete>| {
info!("Buffer data from previous frame {:?}", trigger.event());
});
```
---------
Co-authored-by: Kristoffer Søholm <k.soeholm@gmail.com>
Co-authored-by: IceSentry <IceSentry@users.noreply.github.com>
# Objective
- Fixes#15077
## Solution
- Clears `ViewTargetAttachments` resource every frame before
`create_surfaces` system instead, which was previously done after
`extract_windows`.
## Testing
- Confirmed that examples no longer panic on window resizing with DX12
backend.
- `screenshot` example keeps working after this change.
# Objective
- We use a feature introduced in async-channel 2.3.0, `force_send`
- Existing project fail to compile as they have a lock file on the 2.2.X
## Solution
- Bump async-channel
# Objective
- Fixes#15490 introduced in #15094.
## Solution
- Use non-panicking `try_insert`
## Testing
- Closing window with `CursorIcon` no longer crashes after this change
(confirmed with `window_settings` example)
# Objective
The next step in the migration to required components: Deprecate
`VisibilityBundle` and make `Visibility` require `InheritedVisibility`
and `ViewVisibility`, as per the [chosen
proposal](https://hackmd.io/@bevy/required_components/%2FcO7JPSAQR5G0J_j5wNwtOQ).
## Solution
Deprecate `VisibilityBundle` and make `Visibility` require
`InheritedVisibility` and `ViewVisibility`.
I chose not to deprecate `SpatialBundle` yet, as doing so would mean
that we need to manually add `Visibility` to a bunch of places. It will
be nicer once meshes, sprites, lights, fog, and cameras have been
migrated, since they will require `Transform` and `Visibility` and
therefore not need manually added defaults for them.
---
## Migration Guide
Replace all insertions of `VisibilityBundle` with the `Visibility`
component. The other components required by it will now be inserted
automatically.
# Objective
- Fixes#6370
- Closes#6581
## Solution
- Added the following lints to the workspace:
- `std_instead_of_core`
- `std_instead_of_alloc`
- `alloc_instead_of_core`
- Used `cargo +nightly fmt` with [item level use
formatting](https://rust-lang.github.io/rustfmt/?version=v1.6.0&search=#Item%5C%3A)
to split all `use` statements into single items.
- Used `cargo clippy --workspace --all-targets --all-features --fix
--allow-dirty` to _attempt_ to resolve the new linting issues, and
intervened where the lint was unable to resolve the issue automatically
(usually due to needing an `extern crate alloc;` statement in a crate
root).
- Manually removed certain uses of `std` where negative feature gating
prevented `--all-features` from finding the offending uses.
- Used `cargo +nightly fmt` with [crate level use
formatting](https://rust-lang.github.io/rustfmt/?version=v1.6.0&search=#Crate%5C%3A)
to re-merge all `use` statements matching Bevy's previous styling.
- Manually fixed cases where the `fmt` tool could not re-merge `use`
statements due to conditional compilation attributes.
## Testing
- Ran CI locally
## Migration Guide
The MSRV is now 1.81. Please update to this version or higher.
## Notes
- This is a _massive_ change to try and push through, which is why I've
outlined the semi-automatic steps I used to create this PR, in case this
fails and someone else tries again in the future.
- Making this change has no impact on user code, but does mean Bevy
contributors will be warned to use `core` and `alloc` instead of `std`
where possible.
- This lint is a critical first step towards investigating `no_std`
options for Bevy.
---------
Co-authored-by: François Mockers <francois.mockers@vleue.com>
# Objective
Make it easier to debug why an entity doesn't match a query.
## Solution
List the entities components in `QueryEntityError::QueryDoesNotMatch`'s
message, e.g. `The query does not match the entity 0v1, which has
components foo::Bar, foo::Baz`.
This covers most cases as expected components are typically known and
filtering for change detection is rare when assessing a query by entity
id.
## Testing
Added a test confirming the new message matches the entity's components.
## Migration Guide
- `QueryEntityError` now has a lifetime. Convert it to a custom error if
you need to store it.
---------
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
Co-authored-by: poopy <gonesbird@gmail.com>
# Objective
I'm building a game where i generate a set of meshes where the transform
is identity, and in each mesh the vertices are offset to where the model
is. When adding visibility ranges to the models i noticed that they only
switched when the distance to the origin changed over the threshold and
all at the same time.
## Solution
I believe that each mesh gets a Aabb generated for use with visibility
testing. So we can use that aabb to calculate a more representative
distance to the mesh.
The code to transform the aabb is taken from the visibility sysyem.
## Testing
I tested the changes locally in my project.
Would you like me to write an example or a test somewhere?
Is there any other code that uses the visibility range, that i should
also update?
# Objective
Updating ``glam`` to 0.29, ``encase`` to 0.10.
## Solution
Update the necessary ``Cargo.toml`` files.
## Testing
Ran ``cargo run -p ci`` on Windows; no issues came up.
---------
Co-authored-by: aecsocket <aecsocket@tutanota.com>
# Objective
Currently, the term "value" in the context of reflection is a bit
overloaded.
For one, it can be used synonymously with "data" or "variable". An
example sentence would be "this function takes a reflected value".
However, it is also used to refer to reflected types which are
`ReflectKind::Value`. These types are usually either primitives, opaque
types, or types that don't fall into any other `ReflectKind` (or perhaps
could, but don't due to some limitation/difficulty). An example sentence
would be "this function takes a reflected value type".
This makes it difficult to write good documentation or other learning
material without causing some amount of confusion to readers. Ideally,
we'd be able to move away from the `ReflectKind::Value` usage and come
up with a better term.
## Solution
This PR replaces the terminology of "value" with "opaque" across
`bevy_reflect`. This includes in documentation, type names, variant
names, and macros.
The term "opaque" was chosen because that's essentially how the type is
treated within the reflection API. In other words, its internal
structure is hidden. All we can do is work with the type itself.
### Primitives
While primitives are not technically opaque types, I think it's still
clearer to refer to them as "opaque" rather than keep the confusing
"value" terminology.
We could consider adding another concept for primitives (e.g.
`ReflectKind::Primitive`), but I'm not sure that provides a lot of
benefit right now. In most circumstances, they'll be treated just like
an opaque type. They would also likely use the same macro (or two copies
of the same macro but with different names).
## Testing
You can test locally by running:
```
cargo test --package bevy_reflect --all-features
```
---
## Migration Guide
The reflection concept of "value type" has been replaced with a clearer
"opaque type". The following renames have been made to account for this:
- `ReflectKind::Value` → `ReflectKind::Opaque`
- `ReflectRef::Value` → `ReflectRef::Opaque`
- `ReflectMut::Value` → `ReflectMut::Opaque`
- `ReflectOwned::Value` → `ReflectOwned::Opaque`
- `TypeInfo::Value` → `TypeInfo::Opaque`
- `ValueInfo` → `OpaqueInfo`
- `impl_reflect_value!` → `impl_reflect_opaque!`
- `impl_from_reflect_value!` → `impl_from_reflect_opaque!`
Additionally, declaring your own opaque types no longer uses
`#[reflect_value]`. This attribute has been replaced by
`#[reflect(opaque)]`:
```rust
// BEFORE
#[derive(Reflect)]
#[reflect_value(Default)]
struct MyOpaqueType(u32);
// AFTER
#[derive(Reflect)]
#[reflect(opaque)]
#[reflect(Default)]
struct MyOpaqueType(u32);
```
Note that the order in which `#[reflect(opaque)]` appears does not
matter.
# Objective
The goal of this PR is to introduce `SystemParam` validation in order to
reduce runtime panics.
Fixes#15265
## Solution
`SystemParam` now has a new method `validate_param(...) -> bool`, which
takes immutable variants of `get_param` arguments. The returned value
indicates whether the parameter can be acquired from the world. If
parameters cannot be acquired for a system, it won't be executed,
similarly to run conditions. This reduces panics when using params like
`Res`, `ResMut`, etc. as well as allows for new, ergonomic params like
#15264 or #15302.
Param validation happens at the level of executors. All validation
happens directly before executing a system, in case of normal systems
they are skipped, in case of conditions they return false.
Warning about system skipping is primitive and subject to change in
subsequent PRs.
## Testing
Two executor tests check that all executors:
- skip systems which have invalid parameters:
- piped systems get skipped together,
- dependent systems still run correctly,
- skip systems with invalid run conditions:
- system conditions have invalid parameters,
- system set conditions have invalid parameters.
**Note:** This is an adoption of @Shfty 's adoption (#8131) of #3996!
All I've done is updated the branch and run the docs CI.
> **Note:** This is an adoption of #3996, originally authored by
@molikto
>
> # Objective
> Allow use of `wgpu::Features::SPIRV_SHADER_PASSTHROUGH` and the
corresponding `wgpu::Device::create_shader_module_spirv` for SPIR-V
shader assets.
>
> This enables use-cases where naga is not sufficient to load a given
(valid) SPIR-V module, i.e. cases where naga lacks support for a given
SPIR-V feature employed by a third-party codegen backend like
`rust-gpu`.
>
> ## Solution
> * Reimplemented the changes from [Spirv shader
bypass #3996](https://github.com/bevyengine/bevy/pull/3996), on account
of the original branch having been deleted.
> * Documented the new `spirv_shader_passthrough` feature flag with the
appropriate platform support context from [wgpu's
documentation](https://docs.rs/wgpu/latest/wgpu/struct.Features.html#associatedconstant.SPIRV_SHADER_PASSTHROUGH).
>
> ## Changelog
> * Adds a `spirv_shader_passthrough` feature flag to the following
crates:
>
> * `bevy`
> * `bevy_internal`
> * `bevy_render`
> * Extends `RenderDevice::create_shader_module` with a conditional call
to `wgpu::Device::create_shader_module_spirv` if
`spirv_shader_passthrough` is enabled and
`wgpu::Features::SPIRV_SHADER_PASSTHROUGH` is present for the current
platform.
> * Documents the relevant `wgpu` platform support in
`docs/cargo_features.md`
---------
Co-authored-by: Josh Palmer <1253239+Shfty@users.noreply.github.com>
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
# Objective
> Rust 1.81 released the #[expect(...)] attribute, which works like
#[allow(...)] but throws a warning if the lint isn't raised. This is
preferred to #[allow(...)] because it tells us when it can be removed.
- Adopts the parts of #15118 that are complete, and updates the branch
so it can be merged.
- There were a few conflicts, let me know if I misjudged any of 'em.
Alice's
[recommendation](https://github.com/bevyengine/bevy/issues/15059#issuecomment-2349263900)
seems well-taken, let's do this crate by crate now that @BD103 has done
the lion's share of this!
(Relates to, but doesn't yet completely finish #15059.)
Crates this _doesn't_ cover:
- bevy_input
- bevy_gilrs
- bevy_window
- bevy_winit
- bevy_state
- bevy_render
- bevy_picking
- bevy_core_pipeline
- bevy_sprite
- bevy_text
- bevy_pbr
- bevy_ui
- bevy_gltf
- bevy_gizmos
- bevy_dev_tools
- bevy_internal
- bevy_dylib
---------
Co-authored-by: BD103 <59022059+BD103@users.noreply.github.com>
Co-authored-by: Ben Frankel <ben.frankel7@gmail.com>
Co-authored-by: Antony <antony.m.3012@gmail.com>
Enabled `check-private-items` in `clippy.toml` and then fixed the
resulting errors. Most of these were simply misformatted and of the
remaining:
- ~Added `#[allow(clippy::missing_safety_doc)]` to~ Removed unsafe from
a pair of functions in `bevy_utils/futures` which are only unsafe so
that they can be passed to a function which requires `unsafe fn`
- Removed `unsafe` from `UnsafeWorldCell::observers` as from what I can
tell it is always safe like `components`, `bundles` etc. (this should be
checked)
- Added safety docs to:
- `Bundles::get_storage_unchecked`: Based on the function that writes to
`dynamic_component_storages`
- `Bundles::get_storages_unchecked`: Based on the function that writes
to `dynamic_bundle_storages`
- `QueryIterationCursor::init_empty`: Duplicated from `init`
- `QueryIterationCursor::peek_last`: Thanks Giooschi (also added
internal unsafe blocks)
- `tests::drop_ptr`: Moved safety comment out to the doc string
This lint would also apply to `missing_errors_doc`, `missing_panics_doc`
and `unnecessary_safety_doc` if we chose to enable any of those at some
point, although there is an open
[issue](https://github.com/rust-lang/rust-clippy/issues/13074) to
separate these options.
# Objective
- Fixes#15236
## Solution
- Use bevy_math::ops instead of std floating point operations.
## Testing
- Did you test these changes? If so, how?
Unit tests and `cargo run -p ci -- test`
- How can other people (reviewers) test your changes? Is there anything
specific they need to know?
Execute `cargo run -p ci -- test` on Windows.
- If relevant, what platforms did you test these changes on, and are
there any important ones you can't test?
Windows
## Migration Guide
- Not a breaking change
- Projects should use bevy math where applicable
---------
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
Co-authored-by: IQuick 143 <IQuick143cz@gmail.com>
Co-authored-by: Joona Aalto <jondolf.dev@gmail.com>
# Objective
- Makes naming between add_child and add_children more consistent
- Fixes#15101
## Solution
renamed push_children to add_children
## Testing
- Did you test these changes? If so, how?
Ran tests + grep search for any instance of `push_child`
- Are there any parts that need more testing?
- How can other people (reviewers) test your changes? Is there anything
specific they need to know?
- If relevant, what platforms did you test these changes on, and are
there any important ones you can't test?
ran tests on WSL2
---
## Migration Guide
> This section is optional. If there are no breaking changes, you can
delete this section.
- If this PR is a breaking change (relative to the last release of
Bevy), describe how a user might need to migrate their code to support
these changes
rename any use of `push_children()` to the updated `add_children()`
# Objective
Fixes#14540
## Solution
- Clean slab layouts from stale `SlabId`s when freeing meshes
- Technically performance requirements of freeing now increase based on
the number of existing meshes, but maybe it doesn't matter too much in
practice
- This was the case before this PR too, but it's technically possible to
free and allocate 2^32 times and overflow with `SlabId`s and cause
incorrect behavior. It looks like new meshes would then override old
ones.
## Testing
- Tested in `loading_screen` example and tapping keyboard 1 and 2.
# Objective
Fixes https://github.com/bevyengine/bevy/issues/13225
## Solution
Invalidate `TrackedRenderPass` internal state upon accessing internal
`wgpu::RenderPass`.
## Testing
- Tested by calling `set_bind_group` on `RenderPass` returned by
`TrackedRenderPass::wgpu_pass` and checking if in later `set_bind_group`
calls on `TrackedRenderPass` correct bind group is restored.
# Objective
Hello! I am adopting #11022 to resolve conflicts with `main`. tldr: this
removes `scale` in favour of `scaling_mode`. Please see the original PR
for explanation/discussion.
Also relates to #2580.
## Migration Guide
Replace all uses of `scale` with `scaling_mode`, keeping in mind that
`scale` is (was) a multiplier. For example, replace
```rust
scale: 2.0,
scaling_mode: ScalingMode::FixedHorizontal(4.0),
```
with
```rust
scaling_mode: ScalingMode::FixedHorizontal(8.0),
```
---------
Co-authored-by: Stepan Koltsov <stepan.koltsov@gmail.com>
# Objective
I noticed some issues in `screenshot` example:
1. Cursor icon won't return from `SystemCursorIcon::Progress` to default
icon, even though screen shot saving is done.
2. Panics when exiting window: ``called `Result::unwrap()` on an `Err`
value:
NoEntities("bevy_ecs::query::state::QueryState<bevy_ecs::entity::Entity,
bevy_ecs::query::filter::With<bevy_window:🪟:Window>>")``
## Solution
1. Caused by cursor updating system not responding to [`CursorIcon`
component
removal](5cfcbf47ed/examples/window/screenshot.rs (L38)).
I believe it should, so change it to react to
`RemovedComponents<CursorIcon>`. (a suggestion)
2. Use `get_single` for window.
## Testing
- run screenshot example
---------
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
Hello,
I'd like to contribute to this project by adding some useful constants
and improving the documentation for the AspectRatio struct. Here's a
summary of the changes I've made:
1. Added new constants for common aspect ratios:
- SIXTEEN_NINE (16:9)
- FOUR_THREE (4:3)
- ULTRAWIDE (21:9)
2. Enhanced the overall documentation:
- Improved module-level documentation with an overview and use cases
- Expanded explanation of the AspectRatio struct with examples
- Added detailed descriptions and examples for all methods (both
existing and new)
- Included explanations for the newly introduced constant values
- Added clarifications for From trait implementations
These changes aim to make the AspectRatio API more user-friendly and
easier to understand. The new constants provide convenient access to
commonly used aspect ratios, which I believe will be helpful in many
scenarios.
---------
Co-authored-by: Gonçalo Rica Pais da Silva <bluefinger@gmail.com>
Co-authored-by: Lixou <82600264+DasLixou@users.noreply.github.com>
# Objective
- Fixes#15060
## Solution
- Added `IdentityAssetTransformer<A>` which is an `AssetTransformer`
which infallibly returns the input `Asset` unmodified.
- Replaced `LoadAndSave` and `LoadAndSaveSettings` with type definitions
linking back to `LoadTransformAndSave` and
`LoadTransformAndSaveSettings` respectively.
- Marked `LoadAndSave` and `LoadAndSaveSettings` as depreciated with a
migration guide included, hinting to the user to use the underlying type
instead.
## Testing
- Ran CI locally
---
## Migration Guide
- Replace `LoadAndSave<L, S>` with `LoadTransformAndSave<L,
IdentityAssetTransformer<<L as AssetLoader>::Asset>, S>`
- Replace `LoadAndSaveSettings<L, S>` with
`LoadTransformAndSaveSettings<L, (), S>`
