u-boot/drivers
Jagan Teki 2da24fe551 i2c: mxc: Make 'no gpio pinctrl state' print as debug
Some I2C bus devicetree nodes, doesn't require to have
gpio pinctrl so replace the dev_info to debug so the
print never comes on the console and for bus that uses
gpio pinctrl anyway have dev_err.

Before:
------
U-Boot> i2c dev 1
Setting bus to 1
i2c bus 1 at 0x21a4000, no gpio pinctrl state.

After:
------
U-Boot> i2c dev 1
Setting bus to 1

Cc: Simon Glass <sjg@chromium.org>
Cc: Heiko Schocher <hs@denx.de>
Cc: Peng Fan <peng.fan@nxp.com>
Cc: Michael Trimarchi <michael@amarulasolutions.com>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Acked-by: Heiko Schocher <hs@denx.de>
2016-12-16 17:15:27 +01:00
..
adc sandbox: add ADC driver 2015-11-02 10:38:00 +09:00
bios_emulator bios_emulator: Fix cast for 64-bit compilation 2016-10-11 11:55:33 +08:00
block Revert "Merge branch 'master' of git://www.denx.de/git/u-boot-microblaze" 2016-12-09 07:56:54 -05:00
bootcount bootcounter_ram: Fix misaligned cache warning 2016-11-28 15:10:34 -05:00
clk rockchip: clk: Support setting ACLK 2016-11-25 17:59:31 -07:00
core dm: core: Add dev_get_addr_size_index() to retrieve addr and size 2016-12-02 21:03:31 -07:00
cpu cpu: Add get_vendor callback 2016-10-19 09:01:51 +02:00
crypto powerpc: C29X: Move CONFIG_PPC_C29X to Kconfig option 2016-11-23 23:42:04 -08:00
ddr fsl/ddr: Add erratum_a009942_check_cpo and clean related erratum 2016-12-05 08:31:45 -08:00
demo drivers: hierarchize drivers Kconfig menu 2015-08-12 20:47:44 -04:00
dfu dfu: align array in dfu_get_dev_type with enum dfu_device_type 2016-11-03 11:55:25 +01:00
dma treewide: replace #include <asm/errno.h> with <linux/errno.h> 2016-09-23 17:55:42 -04:00
fpga arm: imx: add i.MX53 Beckhoff CX9020 Embedded PC 2016-12-16 12:57:12 +01:00
gpio gpio: bcm2835: add device tree support 2016-11-28 20:09:45 -05:00
hwmon mailaddr: Update mail address 2016-01-27 15:32:05 +01:00
i2c i2c: mxc: Make 'no gpio pinctrl state' print as debug 2016-12-16 17:15:27 +01:00
input powerpc: MPC8555: Remove macro CONFIG_MPC8555 2016-11-23 23:42:05 -08:00
led dm: led: Tidy up SPL options for the led and led-gpio 2015-09-02 21:28:22 -06:00
mailbox libfdt: Bring in upstream stringlist functions 2016-10-13 13:54:10 -06:00
memory memory: Move TI_AEMIF config to KCONFIG 2016-04-18 17:11:43 -04:00
misc OCOTP: Update OCOTP driver to support i.MX6SLL 2016-12-16 11:38:24 +01:00
mmc ARM: OMAP4+: Add support for getting pbias info from board 2016-12-04 13:54:51 -05:00
mtd spl: Add a name to the SPL load-image methods 2016-12-09 08:40:13 -05:00
net dm: net: fec: Add .read_rom_hwaddr 2016-12-16 17:15:27 +01:00
pch dm: Use dm_scan_fdt_dev() directly where possible 2016-07-27 14:15:54 -06:00
pci pci: mvebu: Add PCIe driver for Armada-8K 2016-12-05 13:34:33 +01:00
pcmcia powerpc: mpc824x: remove MPC824X cpu support 2015-01-05 12:08:55 -05:00
phy/marvell drivers/phy: marvell: Add support for the slave CP COMPHY device 2016-12-05 13:28:23 +01:00
pinctrl arm: imx: add i.MX53 Beckhoff CX9020 Embedded PC 2016-12-16 12:57:12 +01:00
power ARM: OMAP4+: Add support for getting pbias info from board 2016-12-04 13:54:51 -05:00
pwm pwm: imx: increase support up to PWM8 for i.MX6SX 2016-11-29 16:34:27 +01:00
qe powerpc: P1025: Remove macro CONFIG_P1025 2016-11-23 23:42:10 -08:00
ram ram: rename CONFIG_SPL_RAM_SUPPORT to CONFIG_SPL_RAM 2015-08-18 13:46:02 -04:00
remoteproc remoteproc: Add support for TI power processor 2016-03-14 19:18:37 -04:00
reset libfdt: Bring in upstream stringlist functions 2016-10-13 13:54:10 -06:00
rtc rtc: Add RTC chip pcf2127 support 2016-12-02 21:03:31 -07:00
serial arm: imx: add i.MX53 Beckhoff CX9020 Embedded PC 2016-12-16 12:57:12 +01:00
soc Use correct spelling of "U-Boot" 2016-02-06 12:00:59 +01:00
sound of: clean up OF_CONTROL ifdef conditionals 2015-08-18 13:46:05 -04:00
spi ARM: DRA7x/AM57xx: Get rid of CONFIG_AM57XX 2016-12-03 13:21:11 -05:00
spmi Merge git://git.denx.de/u-boot-dm 2016-08-12 16:00:50 -04:00
sysreset xtensa: add support for the 'xtfpga' evaluation board 2016-08-15 18:46:40 -04:00
thermal thermal: Kconfig: Add IMX_THERMAL entry 2016-10-26 16:53:16 +02:00
timer Merge git://git.denx.de/u-boot-dm 2016-03-14 19:21:44 -04:00
tpm tpm: tpm_tis_lpc: Add support for AT97SC3204 2016-12-02 10:37:47 -07:00
twserial drivers: convert makefiles to Kbuild style 2013-10-31 13:26:01 -04:00
usb net: usb: r8152: Use ALLOC_CACHE_ALIGN_BUFFER() to allocate the buffers 2016-12-08 10:36:22 -06:00
video video: Kconfig: Add VIDEO_IPV3 entry 2016-12-16 17:15:27 +01:00
watchdog imx_watchdog: Do not assert WDOG_B on watchdog init 2016-10-04 12:01:14 +02:00
Kconfig drivers/phy: Add Marvell SerDes / PHY drivers used on Armada 3k 2016-09-27 17:29:53 +02:00
Makefile spl: add USB Gadget config option 2016-11-28 19:49:49 -05:00