Mirrors/u-boot
2
0
Fork 0
mirror of https://github.com/AsahiLinux/u-boot synced 2024-12-04 02:20:25 +00:00
Code Issues Projects Releases Packages Wiki Activity
u-boot/arch/arm/include/asm
History
Erik van Luijk bfc37f3cb8 arm: at91: add support for mini-box picosam9g45 board 
Bootlog:
U-Boot SPL 2015.10-rc1-00452-g96a7ed1 (Aug 17 2015 - 10:32:21)
mci: setting clock 258000 Hz, block size 512
mci: setting clock 258000 Hz, block size 512
mci: setting clock 258000 Hz, block size 512
mci: setting clock 33024000 Hz, block size 512
reading u-boot.img
reading u-boot.img

U-Boot 2015.10-rc1-00452-g96a7ed1 (Aug 17 2015 - 10:32:21 +0000)

CPU: AT91SAM9G45
Crystal frequency:       12 MHz
CPU clock        :      400 MHz
Master clock     :  133.333 MHz
       Watchdog enabled
DRAM:  256 MiB
WARNING: Caches not enabled
MMC:   mci: 0
mci: setting clock 260416 Hz, block size 512
mci: setting clock 260416 Hz, block size 512
mci: setting clock 260416 Hz, block size 512
mci: setting clock 33333333 Hz, block size 512
reading uboot.env
In:    serial
Out:   serial
Err:   serial
Net:   macb0
Error: macb0 address not set.

Hit any key to stop autoboot:  0
U-Boot>

Signed-off-by: Erik van Luijk <evanluijk@interact.nl>
[add 'picosam9g45_defconfig' to MAINTAINERS]
Signed-off-by: Andreas Bießmann <andreas.devel@googlemail.com>
2015-08-21 15:47:04 +02:00
..
arch-am33xx ARM: AM43xx: Add support for disabling clocks in uboot 2015-08-17 23:29:14 +05:30
arch-armada100 ARM: remove CONFIG_ARM926EJS defines 2014-11-20 11:28:25 -05:00
arch-armv7 ARMv7: Factor out reusable timer_wait from sunxi/psci_sun7i.S 2015-07-20 11:44:38 -07:00
arch-bcm281xx usb: gadget: bcm_udc_otg files 2015-07-22 08:57:54 +02:00
arch-bcmcygnus arm: bcmcygnus: Enable Ethernet support 2015-08-12 20:47:28 -04:00
arch-bcmnsp arm: add Cygnus and NSP boards 2014-08-30 07:46:40 -04:00
arch-ep93xx arm: ep9315: Return back Cirrus Logic EDB9315A board support 2014-07-04 23:45:48 +02:00
arch-fsl-lsch3 armv8/lsch3/config: Define USB XHCI controller base address for LS2085A 2015-08-03 12:06:39 -07:00
arch-hi6220 mmc: hi6220_dw_mmc: Add hi6220 glue code for dw_mmc controller. 2015-08-12 20:48:01 -04:00
arch-imx imx: mx6ul: Add i.MX6UL CPU type 2015-08-02 11:05:06 +02:00
arch-lpc32xx lpc32xx: add common USB OHCI defines for all LPC32xx boards 2015-08-18 13:45:58 -04:00
arch-ls102xa Correct License and Copyright information on few files 2015-08-12 20:47:46 -04:00
arch-mvebu arm: marvell: Move arch-kirkwood/spi.h to arch-mvebu/spi.h 2014-10-23 09:59:20 -04:00
arch-mx5 patch - arm - define SYS_CACHELINE_SIZE for mx5 2015-06-09 12:00:42 +02:00
arch-mx6 imx:mx6ul add dram spl configuration and header file 2015-08-02 11:05:09 +02:00
arch-mx25 i2c, mxc: rework i2c base address names for different SoCs 2015-05-26 14:17:00 +02:00
arch-mx27 i2c, mxc: rework i2c base address names for different SoCs 2015-05-26 14:17:00 +02:00
arch-mx31 arm: mx31: use common timer functions 2014-09-16 12:51:46 +02:00
arch-mx35 arm: mx35: use common timer functions 2014-09-16 12:53:09 +02:00
arch-mxs arm: mxs: Add 'Wait for JTAG user' if booted in JTAG mode 2015-02-10 12:48:50 +01:00
arch-omap3 omap3: Reboot mode support 2015-08-12 20:47:36 -04:00
arch-omap4 omap: SPL boot devices cleanup and completion 2015-07-27 15:02:04 -04:00
arch-omap5 ARM: dra7xx_evm: Enable EDMA3 in SPL to support DMA on qspi 2015-08-17 23:29:15 +05:30
arch-orion5x edminiv2: switch to SPL 2015-02-25 07:59:50 +01:00
arch-pxa
arch-rmobile arm: rmobile: alt: Update to QoS revision 0.31 and 0.321 2015-06-01 08:56:34 +09:00
arch-s3c24x0 mtd: nand: s3c: Unify the register definition and naming 2014-11-26 23:21:43 -06:00
arch-s5pc1xx dm: exynos: gpio: Convert to driver model 2014-10-22 10:36:36 -06:00
arch-sa1100
arch-spear usb: spear: Add support for both SPEAr600 EHCI controllers 2015-08-19 22:30:20 +02:00
arch-stm32f1 ARMv7M: add STM32F1 support 2015-05-28 08:18:24 -04:00
arch-stm32f4 stm32f429: pass the device unique ID in DTB 2015-07-27 15:02:14 -04:00
arch-stv0991 stv0991: configure clock & pad muxing for qspi 2015-07-03 13:50:53 +05:30
arch-sunxi sun6i: clock: Add support for the mipi pll 2015-08-14 08:37:39 +02:00
arch-tegra ARM: tegra: Make pinmux.h standalone includible 2015-08-13 13:06:03 -07:00
arch-tegra20 tegra: Move display controller header into common 2015-05-13 09:24:10 -07:00
arch-tegra30 ARM: ARM720t: remove empty asm/arch/hardware.h 2015-04-23 08:52:27 -04:00
arch-tegra114 ARM: ARM720t: remove empty asm/arch/hardware.h 2015-04-23 08:52:27 -04:00
arch-tegra124 tegra: Add missing tegra124 peripherals 2015-06-09 09:56:14 -07:00
arch-tegra210 Tegra: PLL: use per-SoC pllinfo table instead of PLL_DIVM/N/P, etc. 2015-08-05 15:22:51 -07:00
arch-u8500
arch-vf610 i2c: fix vf610 support 2015-07-10 10:10:48 +02:00
arch-zynqmp zynqmp: usb: Add usb dwc3 driver support for zynqmp 2015-08-19 11:27:30 +02:00
armv8 armv8: Fix TCR macros for shareability attribute 2015-07-20 11:44:40 -07:00
imx-common imx: mx6 add PAD_CTL_SPEED_LOW for i.MX6SX/UL 2015-08-02 11:05:08 +02:00
iproc-common arm: add Cygnus and NSP boards 2014-08-30 07:46:40 -04:00
kona-common bcm281xx: add support for "USB OTG clock" 2014-12-29 16:31:23 -05:00
proc-armv ARM: add missing HYP mode constant 2014-07-28 17:06:35 +02:00
ti-common dma: ti-edma3: Add helper function to support edma3 transfer 2015-08-17 23:29:15 +05:30
armv7.h virt-dt: Allow reservation of secure region when in a RAM carveout 2015-05-13 09:24:14 -07:00
armv7m.h ARM: Add ARMv7-M support 2015-04-22 12:14:55 -04:00
assembler.h arm: build arch memset/memcpy in Thumb2 mode 2015-01-09 10:20:22 -05:00
atomic.h
bitops.h arm: implement find_next_zero_bit function 2015-04-16 09:31:14 +02:00
bootm.h
byteorder.h
cache.h ARM: cache_v7: use __weak 2014-07-04 19:57:22 +02:00
config.h ARMv8: enable pre-allocation malloc 2015-03-27 16:28:58 +01:00
davinci_rtc.h
dma-mapping.h arm: asm: dma-mapping: added dma_free_coherent API 2015-04-14 05:48:09 +02:00
ehci-omap.h
emif.h am33xx: Re-enable SW levelling for DDR2 2015-06-15 10:57:26 -04:00
errno.h
fsl_secure_boot.h Add bootscript support to esbc_validate. 2015-04-21 10:19:19 -07:00
gic.h
global_data.h omap-common: Common boot code OMAP3 support and cleanup 2015-07-27 15:02:03 -04:00
gpio.h
hardware.h
io.h arm: ls102xa: Add Freescale LS102xA SoC support 2014-09-08 10:30:32 -07:00
linkage.h
mach-types.h arm: at91: add support for mini-box picosam9g45 board 2015-08-21 15:47:04 +02:00
macro.h Armv8: Initializing CNTVOFF_EL2 2015-04-16 11:27:15 +02:00
memory.h
omap_common.h ARM: OMAP5: Add functions to enable and disable EDMA3 clocks 2015-08-17 23:29:14 +05:30
omap_gpio.h gpio: omap: Drop 'method' parameter 2015-08-12 20:48:06 -04:00
omap_mmc.h
omap_musb.h
pl310.h mx6: Set shared override bit in PL310 AUX_CTRL register 2015-05-15 19:21:24 +02:00
posix_types.h
processor.h
psci.h ARM: Add board-specific initialization hook for PSCI 2015-05-13 09:24:15 -07:00
ptrace.h
sections.h
secure.h ARM: HYP/non-sec: allow relocation to secure RAM 2014-07-28 17:19:09 +02:00
setup.h
spl.h arm: spl: Avoid setting up a duplicate global data structure 2015-03-04 14:55:04 -05:00
string.h
system.h armv8: caches: Added routine to set non cacheable region 2015-07-31 01:38:12 +02:00
types.h include: asm: types: add resource_size_t type 2015-04-14 05:48:09 +02:00
u-boot-arm.h common: Move dram_init() declaration to common location 2015-02-09 15:08:48 +01:00
u-boot.h Revert "break build if it would produce broken binary" 2015-07-07 11:39:36 +02:00
unaligned.h
utils.h