Mirrors/u-boot
2
0
Fork 0
mirror of https://github.com/AsahiLinux/u-boot synced 2024-11-20 11:43:22 +00:00
Code Issues Projects Releases Packages Wiki Activity
u-boot/include/configs
History
Haiying Wang bea3f28d28 Add support for reading and writing mac addresses to or from ID EEPROM. 
Added code for reading and writing Mac addresses to/from ID EEPROM(0x57).
With attached patch, we can use command "mac/mac read/mac save/"
to read and write EEPROM under u-boot prompt.

U-boot will calculate the checksum of EEPROM while bootup,
if it is right, then u-boot will check whether the mac address
of eTSEC0/1/2/3 is availalbe (non-zero).

If there is mac address availabe in EEPROM, u-boot will use it,
otherewise, u-boot will use the mac address defined in
MPC8641HPCN.h. This matches the requirement to set unique mac address
for each TSEC port.

Signed-off-by: Haiying Wang <haiying.wang@freescale.com>
Signed-off-by: York Sun <yorksun@freescale.com>
2006-07-13 10:57:37 -05:00
..
A3000.h * Patches by Yuli Barcohen, 13 Jul 2003: 2003-07-14 22:13:32 +00:00
ADCIOP.h Cleanup (PPC4xx is AMCC now) 2005-09-23 11:05:55 +02:00
Adder.h Add support for Adder boards with 16MB SDRAM; 2006-03-12 01:43:03 +01:00
ADNPESC1.h Add common (with Linux) MTD partition scheme and "mtdparts" command 2005-08-08 01:03:24 +02:00
ADNPESC1_base_32.h * Patch by Stephan Linz, 09 Mar 2004 2004-03-14 15:20:55 +00:00
ADS860.h Patch by Yuli Barcohen, 19 Apr 2004: 2004-06-06 21:35:06 +00:00
adsvix.h Patch by Steven Scholz, 06 Apr 2005: 2005-04-06 13:52:31 +00:00
aev.h Change all '$(...)' variable references into '${...}' 2005-11-20 21:40:11 +01:00
Alaska8220.h Add support for multiple PHYs. 2005-10-28 22:30:33 +02:00
AmigaOneG3SE.h * The PS/2 mux on the BMS2003 board needs 450 ms after power on 2004-01-20 23:12:12 +00:00
AMX860.h Change all '$(...)' variable references into '${...}' 2005-11-20 21:40:11 +01:00
AP1000.h Support passing of OF flat trees to the kernel. 2005-10-13 01:45:54 +02:00
APC405.h Change all '$(...)' variable references into '${...}' 2005-11-20 21:40:11 +01:00
AR405.h Cleanup (PPC4xx is AMCC now) 2005-09-23 11:05:55 +02:00
armadillo.h Add board support for armadillo HT1070 2005-09-26 01:06:33 +02:00
ASH405.h Re-factoring the legacy NAND code (legacy NAND now only in board-specific 2006-03-05 18:57:33 +01:00
assabet.h Patch by Steven Scholz, 4 Apr 2005: 2005-04-04 12:44:11 +00:00
at91rm9200dk.h Add support for multiple PHYs. 2005-10-28 22:30:33 +02:00
atc.h Change all '$(...)' variable references into '${...}' 2005-11-20 21:40:11 +01:00
B2.h Patch by Steven Scholz, 4 Apr 2005: 2005-04-04 12:44:11 +00:00
BAB7xx.h Change all '$(...)' variable references into '${...}' 2005-11-20 21:40:11 +01:00
bamboo.h Re-factoring the legacy NAND code (legacy NAND now only in board-specific 2006-03-05 18:57:33 +01:00
barco.h Support passing of OF flat trees to the kernel. 2005-10-13 01:45:54 +02:00
BC3450.h Add support for BC3450 board 2006-04-21 18:30:47 +02:00
BMW.h Re-factoring the legacy NAND code (legacy NAND now only in board-specific 2006-03-05 18:57:33 +01:00
bubinga.h Change all '$(...)' variable references into '${...}' 2005-11-20 21:40:11 +01:00
c2mon.h Change all '$(...)' variable references into '${...}' 2005-11-20 21:40:11 +01:00
CANBT.h Cleanup (PPC4xx is AMCC now) 2005-09-23 11:05:55 +02:00
canmb.h Change all '$(...)' variable references into '${...}' 2005-11-20 21:40:11 +01:00
CATcenter.h Fix JFFS2 support for legacy NAND driver. 2006-04-08 19:08:06 +02:00
CCM.h Change all '$(...)' variable references into '${...}' 2005-11-20 21:40:11 +01:00
cerf250.h Patch by Steven Scholz, 4 Apr 2005: 2005-04-04 12:44:11 +00:00
cm41xx.h * Extend burst mode RAM test program to take a loop count 2005-05-23 10:49:50 +00:00
cm4008.h * Extend burst mode RAM test program to take a loop count 2005-05-23 10:49:50 +00:00
cmc_pu2.h Change all '$(...)' variable references into '${...}' 2005-11-20 21:40:11 +01:00
cmi_mpc5xx.h * Code cleanup: 2003-06-27 21:31:46 +00:00
CMS700.h Re-factoring the legacy NAND code (legacy NAND now only in board-specific 2006-03-05 18:57:33 +01:00
cobra5272.h Patch by Florian Schlote, 08 Sep 2004: 2005-01-09 18:21:42 +00:00
cogent_common.h * Patch by Shlomo Kut, 29 Mar 2004: 2004-09-29 11:02:56 +00:00
cogent_mpc8xx.h * The PS/2 mux on the BMS2003 board needs 450 ms after power on 2004-01-20 23:12:12 +00:00
cogent_mpc8260.h * Patch by Jon Loeliger, Kumar Gala 2005-02-08 2005-07-23 10:37:35 -05:00
CPC45.h Fix problems with SNTP support; 2005-04-02 22:37:54 +00:00
CPCI2DP.h PMC405 and CPCI405: Moved configuration of pci resources into config file. 2006-01-18 20:03:15 +01:00
CPCI405.h Re-factoring the legacy NAND code (legacy NAND now only in board-specific 2006-03-05 18:57:33 +01:00
CPCI405AB.h Re-factoring the legacy NAND code (legacy NAND now only in board-specific 2006-03-05 18:57:33 +01:00
CPCI405DT.h Re-factoring the legacy NAND code (legacy NAND now only in board-specific 2006-03-05 18:57:33 +01:00
CPCI440.h Cleanup (PPC4xx is AMCC now) 2005-09-23 11:05:55 +02:00
CPCI750.h Minor code cleanup 2006-03-06 13:03:37 +01:00
CPCI4052.h Re-factoring the legacy NAND code (legacy NAND now only in board-specific 2006-03-05 18:57:33 +01:00
cpci5200.h Change all '$(...)' variable references into '${...}' 2005-11-20 21:40:11 +01:00
CPCIISER4.h Cleanup (PPC4xx is AMCC now) 2005-09-23 11:05:55 +02:00
CPU86.h Fix JFFS2 support for legacy NAND driver. 2006-04-08 19:08:06 +02:00
CPU87.h Re-factoring the legacy NAND code (legacy NAND now only in board-specific 2006-03-05 18:57:33 +01:00
cradle.h Patch by Steven Scholz, 4 Apr 2005: 2005-04-04 12:44:11 +00:00
CRAYL1.h * The PS/2 mux on the BMS2003 board needs 450 ms after power on 2004-01-20 23:12:12 +00:00
csb226.h Patch by Steven Scholz, 4 Apr 2005: 2005-04-04 12:44:11 +00:00
csb272.h Change all '$(...)' variable references into '${...}' 2005-11-20 21:40:11 +01:00
csb472.h Change all '$(...)' variable references into '${...}' 2005-11-20 21:40:11 +01:00
csb637.h Fix the machine-id of the Cogent csb637 board 2005-10-06 01:26:16 +02:00
CU824.h Fix problems with SNTP support; 2005-04-02 22:37:54 +00:00
DASA_SIM.h Cleanup (PPC4xx is AMCC now) 2005-09-23 11:05:55 +02:00
DB64360.h Change all '$(...)' variable references into '${...}' 2005-11-20 21:40:11 +01:00
DB64460.h Change all '$(...)' variable references into '${...}' 2005-11-20 21:40:11 +01:00
dbau1x00.h * Fix dbau1x00 Board 2006-04-11 14:53:29 +02:00
debris.h Change all '$(...)' variable references into '${...}' 2005-11-20 21:40:11 +01:00
delta.h Merge with /home/m8/git/u-boot 2006-04-12 12:26:32 +02:00
DK1C20.h Add common (with Linux) MTD partition scheme and "mtdparts" command 2005-08-08 01:03:24 +02:00
DK1C20_safe_32.h Patches by Stephan Linz, 30 Jan 2004: 2004-02-09 23:12:24 +00:00
DK1C20_standard_32.h Patches by Stephan Linz, 30 Jan 2004: 2004-02-09 23:12:24 +00:00
DK1S10.h Add common (with Linux) MTD partition scheme and "mtdparts" command 2005-08-08 01:03:24 +02:00
DK1S10_mtx_ldk_20.h Patches by Stephan Linz, 30 Jan 2004: 2004-02-09 23:12:24 +00:00
DK1S10_safe_32.h Patches by Stephan Linz, 30 Jan 2004: 2004-02-09 23:12:24 +00:00
DK1S10_standard_32.h Patches by Stephan Linz, 30 Jan 2004: 2004-02-09 23:12:24 +00:00
dnp1110.h Patch by Steven Scholz, 4 Apr 2005: 2005-04-04 12:44:11 +00:00
DP405.h Cleanup (PPC4xx is AMCC now) 2005-09-23 11:05:55 +02:00
DU405.h Cleanup (PPC4xx is AMCC now) 2005-09-23 11:05:55 +02:00
ebony.h Change all '$(...)' variable references into '${...}' 2005-11-20 21:40:11 +01:00
ELPPC.h Change all '$(...)' variable references into '${...}' 2005-11-20 21:40:11 +01:00
ELPT860.h Change all '$(...)' variable references into '${...}' 2005-11-20 21:40:11 +01:00
EP88x.h Add support for EmbeddedPlanet EP88x boards 2006-03-12 23:17:31 +01:00
ep7312.h Add common (with Linux) MTD partition scheme and "mtdparts" command 2005-08-08 01:03:24 +02:00
ep8248.h Add support for ep8248 board 2005-08-06 01:42:58 +02:00
ep8260.h Update ep8260: Fix flash timeouts; improve clock resolution for faster UARTs 2005-09-25 16:56:15 +02:00
ERIC.h Cleanup (PPC4xx is AMCC now) 2005-09-23 11:05:55 +02:00
ESTEEM192E.h * Code cleanup: 2003-06-27 21:31:46 +00:00
ETX094.h Change all '$(...)' variable references into '${...}' 2005-11-20 21:40:11 +01:00
evb4510.h Patch by Steven Scholz, 4 Apr 2005: 2005-04-04 12:44:11 +00:00
EVB64260.h Add common (with Linux) MTD partition scheme and "mtdparts" command 2005-08-08 01:03:24 +02:00
eXalion.h * Patch by Pierre Aubert, 26 Feb 2004 2004-02-27 08:20:54 +00:00
EXBITGEN.h * The PS/2 mux on the BMS2003 board needs 450 ms after power on 2004-01-20 23:12:12 +00:00
ezkit533.h Coding Style cleanup 2006-03-12 02:55:22 +01:00
FADS823.h Change all '$(...)' variable references into '${...}' 2005-11-20 21:40:11 +01:00
FADS850SAR.h * Patch by Robert Schwebel, 10 Jun 2004: 2004-06-10 21:34:36 +00:00
FADS860T.h Patch by Yuli Barcohen, 19 Apr 2004: 2004-06-06 21:35:06 +00:00
FLAGADM.h Initial revision 2002-08-19 11:57:05 +00:00
FPS850L.h * Fix flash parameters passed to Linux for PPChameleon board 2004-06-17 18:50:45 +00:00
FPS860L.h Fix problems with SNTP support; 2005-04-02 22:37:54 +00:00
G2000.h Change all '$(...)' variable references into '${...}' 2005-11-20 21:40:11 +01:00
gcplus.h Patch by Steven Scholz, 4 Apr 2005: 2005-04-04 12:44:11 +00:00
GEN860T.h Re-factoring the legacy NAND code (legacy NAND now only in board-specific 2006-03-05 18:57:33 +01:00
GENIETV.h Change all '$(...)' variable references into '${...}' 2005-11-20 21:40:11 +01:00
GTH.h Initial revision 2002-08-19 11:57:05 +00:00
gw8260.h Adjust "echo" as a default command 2006-03-12 16:51:59 +01:00
h2_p2_dbg_board.h * Code cleanup (ARM mostly) 2004-07-01 16:30:44 +00:00
hermes.h Change all '$(...)' variable references into '${...}' 2005-11-20 21:40:11 +01:00
HH405.h Merge the new NAND code (testing-NAND brach); see doc/README.nand 2006-03-06 11:25:22 +01:00
HIDDEN_DRAGON.h * Patch by Yusdi Santoso, 22 Oct 2004: 2005-04-03 15:51:42 +00:00
HMI10.h Change all '$(...)' variable references into '${...}' 2005-11-20 21:40:11 +01:00
hmi1001.h Change all '$(...)' variable references into '${...}' 2005-11-20 21:40:11 +01:00
HUB405.h Re-factoring the legacy NAND code (legacy NAND now only in board-specific 2006-03-05 18:57:33 +01:00
hymod.h * Fix PHY address argument passing with mii info command 2005-09-24 21:54:50 +02:00
IAD210.h Change all '$(...)' variable references into '${...}' 2005-11-20 21:40:11 +01:00
IceCube.h Set SDelay register in the DDR controller for the MPC5200B chip. 2006-03-29 13:17:09 +02:00
ICU862.h Change all '$(...)' variable references into '${...}' 2005-11-20 21:40:11 +01:00
IDS8247.h Fix JFFS2 support for legacy NAND driver. 2006-04-08 19:08:06 +02:00
impa7.h Add common (with Linux) MTD partition scheme and "mtdparts" command 2005-08-08 01:03:24 +02:00
incaip.h Change all '$(...)' variable references into '${...}' 2005-11-20 21:40:11 +01:00
inka4x0.h Update default environment for INKA4x00 board. 2006-02-07 15:18:25 +01:00
innokom.h Add common (with Linux) MTD partition scheme and "mtdparts" command 2005-08-08 01:03:24 +02:00
integratorap.h Update ARM Integrator boards: 2005-10-04 23:10:28 +02:00
integratorcp.h Update ARM Integrator boards: 2005-10-04 23:10:28 +02:00
IP860.h Change all '$(...)' variable references into '${...}' 2005-11-20 21:40:11 +01:00
IPHASE4539.h * Patch by Jon Loeliger, Kumar Gala 2005-02-08 2005-07-23 10:37:35 -05:00
ISPAN.h Adjust "echo" as a default command 2006-03-12 16:51:59 +01:00
IVML24.h * Patch by Martin Krause, 17 Jul 2003: 2003-07-17 23:16:40 +00:00
IVMS8.h * Patch by Martin Krause, 17 Jul 2003: 2003-07-17 23:16:40 +00:00
ixdp425.h Patch by Steven Scholz, 4 Apr 2005: 2005-04-04 12:44:11 +00:00
JSE.h Fix device partition intialization for SystemACE disks. 2005-10-05 00:25:17 +02:00
KAREF.h Cleanup (PPC4xx is AMCC now) 2005-09-23 11:05:55 +02:00
kb9202.h Complete support for the KwikByte KB920x boards 2005-10-06 01:22:22 +02:00
KUP4K.h Change all '$(...)' variable references into '${...}' 2005-11-20 21:40:11 +01:00
KUP4X.h Change all '$(...)' variable references into '${...}' 2005-11-20 21:40:11 +01:00
LANTEC.h * Fix PHY address argument passing with mii info command 2005-09-24 21:54:50 +02:00
lart.h Patch by Steven Scholz, 4 Apr 2005: 2005-04-04 12:44:11 +00:00
logodl.h Patch by Steven Scholz, 4 Apr 2005: 2005-04-04 12:44:11 +00:00
lpd7a400-10.h * Patch by Paul Ruhland, 10 Jun 2004: 2004-06-10 21:55:33 +00:00
lpd7a400.h Patch by Steven Scholz, 4 Apr 2005: 2005-04-04 12:44:11 +00:00
lpd7a404-10.h * Patch by Paul Ruhland, 10 Jun 2004: 2004-06-10 21:55:33 +00:00
lpd7a404.h Patch by Steven Scholz, 4 Apr 2005: 2005-04-04 12:44:11 +00:00
luan.h Add support for AMCC 440SP, add support for AMCC Luan 440SP eval board. 2005-11-29 18:18:21 +01:00
lubbock.h Fixes to the Lubbock (PXA 25x) support: 2005-09-26 00:29:53 +02:00
lwmon.h * Patch by Detlev Zundel, 30 Jun 2005: 2005-07-04 00:03:16 +00:00
M5272C3.h * Some code cleanup 2004-02-12 00:47:09 +00:00
M5282EVB.h * Some code cleanup 2004-02-12 00:47:09 +00:00
MBX.h * Code cleanup: 2003-06-27 21:31:46 +00:00
MBX860T.h Initial revision 2002-08-19 11:57:05 +00:00
mcc200.h Fix Quad UART mapping on MCC200 board due to new HW revision 2006-04-13 16:35:22 +02:00
METROBOX.h Cleanup (PPC4xx is AMCC now) 2005-09-23 11:05:55 +02:00
MHPC.h Change all '$(...)' variable references into '${...}' 2005-11-20 21:40:11 +01:00
MIP405.h Adjust "echo" as a default command 2006-03-12 16:51:59 +01:00
ML2.h Cleanup (PPC4xx is AMCC now) 2005-09-23 11:05:55 +02:00
ml300.h Cleanup (PPC4xx is AMCC now) 2005-09-23 11:05:55 +02:00
modnet50.h Add common (with Linux) MTD partition scheme and "mtdparts" command 2005-08-08 01:03:24 +02:00
MOUSSE.h * Code cleanup: 2003-06-27 21:31:46 +00:00
mp2usb.h Add support for AT91RM9200 OHCI Controller. 2005-09-26 01:26:56 +02:00
MPC86xADS.h Switch MPC86xADS and MPC885ADS boards to use cpuclk environment 2006-03-12 01:55:43 +01:00
MPC885ADS.h Switch MPC86xADS and MPC885ADS boards to use cpuclk environment 2006-03-12 01:55:43 +01:00
MPC8260ADS.h Add board support for armadillo HT1070 2005-09-26 01:06:33 +02:00
MPC8266ADS.h Change all '$(...)' variable references into '${...}' 2005-11-20 21:40:11 +01:00
MPC8349ADS.h Merge with git://git.kernel.org/pub/scm/boot/u-boot/u-boot.git#mpc8349ads 2006-03-12 21:49:19 +01:00
MPC8349EMDS.h Some code cleanup 2006-04-16 10:51:58 +02:00
MPC8540ADS.h * Patch by Jon Loeliger, 2005-05-05 2005-07-25 14:05:07 -05:00
MPC8540EVAL.h Fix style issues primarily in 85xx and 83xx boards. 2005-08-01 13:20:47 -05:00
MPC8541CDS.h * Patch by Jon Loeliger, 2005-05-05 2005-07-25 14:05:07 -05:00
MPC8548CDS.h * Patch by Jon Loeliger, 2005-05-05 2005-07-25 14:05:07 -05:00
MPC8555CDS.h * Patch by Jon Loeliger, 2005-05-05 2005-07-25 14:05:07 -05:00
MPC8560ADS.h Add support for multiple PHYs. 2005-10-28 22:30:33 +02:00
MPC8641HPCN.h Add support for reading and writing mac addresses to or from ID EEPROM. 2006-07-13 10:57:37 -05:00
MUSENKI.h * Code cleanup: 2003-06-27 21:31:46 +00:00
MVBLUE.h Change all '$(...)' variable references into '${...}' 2005-11-20 21:40:11 +01:00
MVS1.h Change all '$(...)' variable references into '${...}' 2005-11-20 21:40:11 +01:00
mx1ads.h Patch by Steven Scholz, 4 Apr 2005: 2005-04-04 12:44:11 +00:00
mx1fs2.h Add common (with Linux) MTD partition scheme and "mtdparts" command 2005-08-08 01:03:24 +02:00
NC650.h Update for NC650 board. Add NC650 based CP850 configuration. 2006-04-19 11:52:46 +02:00
NETPHONE.h Re-factoring the legacy NAND code (legacy NAND now only in board-specific 2006-03-05 18:57:33 +01:00
netstar.h Re-factoring the legacy NAND code (legacy NAND now only in board-specific 2006-03-05 18:57:33 +01:00
NETTA.h Fix JFFS2 support for legacy NAND driver. 2006-04-08 19:08:06 +02:00
NETTA2.h Re-factoring the legacy NAND code (legacy NAND now only in board-specific 2006-03-05 18:57:33 +01:00
NETVIA.h Re-factoring the legacy NAND code (legacy NAND now only in board-specific 2006-03-05 18:57:33 +01:00
ns9750dev.h Patch by Steven Scholz, 4 Apr 2005: 2005-04-04 12:44:11 +00:00
NSCU.h Change all '$(...)' variable references into '${...}' 2005-11-20 21:40:11 +01:00
NX823.h Initial revision 2002-08-20 16:13:03 +00:00
o2dnt.h Change port configuration for O2DNT (CODEC1 on PSC1) 2005-12-06 20:33:07 +01:00
ocotea.h Change all '$(...)' variable references into '${...}' 2005-11-20 21:40:11 +01:00
OCRTC.h Cleanup (PPC4xx is AMCC now) 2005-09-23 11:05:55 +02:00
omap730.h * Patch by Rishi Bhattacharya, 08 May 2004: 2004-06-08 00:22:43 +00:00
omap730p2.h Patch by Steven Scholz, 4 Apr 2005: 2005-04-04 12:44:11 +00:00
omap1510.h Add support for Siemens SX1 mobile phone; 2004-03-12 00:14:09 +00:00
omap1510inn.h Patch by Steven Scholz, 4 Apr 2005: 2005-04-04 12:44:11 +00:00
omap1610h2.h Patch by Steven Scholz, 4 Apr 2005: 2005-04-04 12:44:11 +00:00
omap1610inn.h Patch by Steven Scholz, 4 Apr 2005: 2005-04-04 12:44:11 +00:00
omap2420h4.h Fix JFFS2 support for legacy NAND driver. 2006-04-08 19:08:06 +02:00
omap5912osk.h Patch by Steven Scholz, 4 Apr 2005: 2005-04-04 12:44:11 +00:00
ORSG.h Cleanup (PPC4xx is AMCC now) 2005-09-23 11:05:55 +02:00
OXC.h * Patch by Mark Jonas: Remove config.tmp files only when 2004-04-08 22:31:29 +00:00
P3G4.h Change all '$(...)' variable references into '${...}' 2005-11-20 21:40:11 +01:00
p3p440.h Merge with /home/sr/git/u-boot/cfi-flash 2006-04-06 00:16:58 +02:00
PATI.h * Patch by Ronen Shitrit, 10 Dec 2003: 2004-01-03 00:43:19 +00:00
pb1x00.h Change all '$(...)' variable references into '${...}' 2005-11-20 21:40:11 +01:00
PCI405.h Cleanup (PPC4xx is AMCC now) 2005-09-23 11:05:55 +02:00
PCI5441.h Patches by Scott McNutt, 24 Aug 2004: 2004-10-10 21:27:30 +00:00
PCIPPC2.h Re-factoring the legacy NAND code (legacy NAND now only in board-specific 2006-03-05 18:57:33 +01:00
PCIPPC6.h Re-factoring the legacy NAND code (legacy NAND now only in board-specific 2006-03-05 18:57:33 +01:00
pcu_e.h Change all '$(...)' variable references into '${...}' 2005-11-20 21:40:11 +01:00
pf5200.h Change all '$(...)' variable references into '${...}' 2005-11-20 21:40:11 +01:00
PIP405.h Adjust "echo" as a default command 2006-03-12 16:51:59 +01:00
PK1C20.h * Patch by Scott McNutt, 21 Oct 2004: 2005-03-30 23:28:18 +00:00
pleb2.h Patch by Steven Scholz, 4 Apr 2005: 2005-04-04 12:44:11 +00:00
PLU405.h Re-factoring the legacy NAND code (legacy NAND now only in board-specific 2006-03-05 18:57:33 +01:00
PM520.h Re-factoring the legacy NAND code (legacy NAND now only in board-specific 2006-03-05 18:57:33 +01:00
PM826.h Re-factoring the legacy NAND code (legacy NAND now only in board-specific 2006-03-05 18:57:33 +01:00
PM828.h Re-factoring the legacy NAND code (legacy NAND now only in board-specific 2006-03-05 18:57:33 +01:00
PM854.h Add support for multiple PHYs. 2005-10-28 22:30:33 +02:00
PM856.h Fix build problems for PM856 Board 2005-08-08 00:47:14 +02:00
PMC405.h PMC405 and CPCI405: Moved configuration of pci resources into config file. 2006-01-18 20:03:15 +01:00
PN62.h Change all '$(...)' variable references into '${...}' 2005-11-20 21:40:11 +01:00
PPChameleonEVB.h Updates to common PPC4xx onboard (DDR)SDRAM init code (405 and 440) 2006-03-31 14:32:07 +02:00
ppmc8260.h Adjust "echo" as a default command 2006-03-12 16:51:59 +01:00
purple.h Change all '$(...)' variable references into '${...}' 2005-11-20 21:40:11 +01:00
pxa255_idp.h Add Vibren (was Accelent) PXA255 IDP Support 2005-09-25 15:59:01 +02:00
QS823.h Patch by Wolter Kamphuis, 05 Dec 2003: 2003-12-07 22:27:15 +00:00
QS850.h Patch by Wolter Kamphuis, 05 Dec 2003: 2003-12-07 22:27:15 +00:00
QS860T.h Change all '$(...)' variable references into '${...}' 2005-11-20 21:40:11 +01:00
quantum.h Change all '$(...)' variable references into '${...}' 2005-11-20 21:40:11 +01:00
R360MPI.h Change all '$(...)' variable references into '${...}' 2005-11-20 21:40:11 +01:00
Rattler.h Adjust "echo" as a default command 2006-03-12 16:51:59 +01:00
RBC823.h Fix JFFS2 support for legacy NAND driver. 2006-04-08 19:08:06 +02:00
rmu.h Change all '$(...)' variable references into '${...}' 2005-11-20 21:40:11 +01:00
RPXClassic.h Change all '$(...)' variable references into '${...}' 2005-11-20 21:40:11 +01:00
RPXlite.h RPXlite configuration fixes 2006-03-12 01:48:55 +01:00
RPXlite_DW.h Add support for Lite5200B board. 2006-03-17 11:42:53 +01:00
RPXsuper.h Adjust "echo" as a default command 2006-03-12 16:51:59 +01:00
RRvision.h Change all '$(...)' variable references into '${...}' 2005-11-20 21:40:11 +01:00
rsdproto.h * Patch by Jon Loeliger, Kumar Gala 2005-02-08 2005-07-23 10:37:35 -05:00
sacsng.h Adjust "echo" as a default command 2006-03-12 16:51:59 +01:00
Sandpoint8240.h Change all '$(...)' variable references into '${...}' 2005-11-20 21:40:11 +01:00
Sandpoint8245.h Fix problems with SNTP support; 2005-04-02 22:37:54 +00:00
sbc405.h Change all '$(...)' variable references into '${...}' 2005-11-20 21:40:11 +01:00
sbc8240.h * Rename SBC8560 into sbc8560 for consistency 2004-07-10 22:35:59 +00:00
sbc8260.h Adjust "echo" as a default command 2006-03-12 16:51:59 +01:00
SBC8540.h * Patch by Jon Loeliger, 2005-05-05 2005-07-25 14:05:07 -05:00
SBC8560.h * Patch by Jon Loeliger, 2005-05-05 2005-07-25 14:05:07 -05:00
sbc8560.h * Patch by Jon Loeliger, 2005-05-05 2005-07-25 14:05:07 -05:00
sc520_cdp.h Add common (with Linux) MTD partition scheme and "mtdparts" command 2005-08-08 01:03:24 +02:00
sc520_spunk.h Add common (with Linux) MTD partition scheme and "mtdparts" command 2005-08-08 01:03:24 +02:00
sc520_spunk_rel.h * Code cleanup: 2003-06-27 21:31:46 +00:00
scb9328.h Patch by Steven Scholz, 4 Apr 2005: 2005-04-04 12:44:11 +00:00
SCM.h Change all '$(...)' variable references into '${...}' 2005-11-20 21:40:11 +01:00
shannon.h Patch by Steven Scholz, 4 Apr 2005: 2005-04-04 12:44:11 +00:00
SL8245.h * Add support for USB Mass Storage Devices (BBB) 2003-09-10 18:20:28 +00:00
SM850.h Change all '$(...)' variable references into '${...}' 2005-11-20 21:40:11 +01:00
smdk2400.h Patch by Steven Scholz, 4 Apr 2005: 2005-04-04 12:44:11 +00:00
smdk2410.h Patch by Steven Scholz, 4 Apr 2005: 2005-04-04 12:44:11 +00:00
smmaco4.h Rename SMMACO4 board into smmaco4 for consistency with Linux. 2006-02-22 10:25:39 +01:00
sorcery.h Add PCI support for Sorcery board. 2005-05-16 15:23:22 +00:00
SPD823TS.h * Patch by Martin Krause, 17 Jul 2003: 2003-07-17 23:16:40 +00:00
spieval.h Change all '$(...)' variable references into '${...}' 2005-11-20 21:40:11 +01:00
stamp.h Coding Style cleanup 2006-03-12 02:55:22 +01:00
stxgp3.h * Patch by Jon Loeliger, 2005-05-05 2005-07-25 14:05:07 -05:00
stxxtc.h Fix JFFS2 support for legacy NAND driver. 2006-04-08 19:08:06 +02:00
suzaku.h Patch by Steven Scholz, 4 Apr 2005: 2005-04-04 12:44:11 +00:00
svm_sc8xx.h Re-factoring the legacy NAND code (legacy NAND now only in board-specific 2006-03-05 18:57:33 +01:00
SX1.h Patch by Steven Scholz, 4 Apr 2005: 2005-04-04 12:44:11 +00:00
SXNI855T.h Re-factoring the legacy NAND code (legacy NAND now only in board-specific 2006-03-05 18:57:33 +01:00
TASREG.h Code cleanup. 2004-12-16 21:44:03 +00:00
tb0229.h Change all '$(...)' variable references into '${...}' 2005-11-20 21:40:11 +01:00
TOP860.h Change all '$(...)' variable references into '${...}' 2005-11-20 21:40:11 +01:00
TOP5200.h Change all '$(...)' variable references into '${...}' 2005-11-20 21:40:11 +01:00
Total5200.h Change all '$(...)' variable references into '${...}' 2005-11-20 21:40:11 +01:00
TQM85xx.h Add support for TQM8541/8555 boards, TQM85xx support reworked: 2005-11-30 13:06:40 +01:00
TQM823L.h Change all '$(...)' variable references into '${...}' 2005-11-20 21:40:11 +01:00
TQM823M.h Change all '$(...)' variable references into '${...}' 2005-11-20 21:40:11 +01:00
TQM834x.h Enable address translation on MPC83xx 2006-02-10 15:40:06 -06:00
TQM850L.h Change all '$(...)' variable references into '${...}' 2005-11-20 21:40:11 +01:00
TQM850M.h Change all '$(...)' variable references into '${...}' 2005-11-20 21:40:11 +01:00
TQM855L.h Change all '$(...)' variable references into '${...}' 2005-11-20 21:40:11 +01:00
TQM855M.h Change all '$(...)' variable references into '${...}' 2005-11-20 21:40:11 +01:00
TQM860L.h Change all '$(...)' variable references into '${...}' 2005-11-20 21:40:11 +01:00
TQM860M.h Change all '$(...)' variable references into '${...}' 2005-11-20 21:40:11 +01:00
TQM862L.h Change all '$(...)' variable references into '${...}' 2005-11-20 21:40:11 +01:00
TQM862M.h Change all '$(...)' variable references into '${...}' 2005-11-20 21:40:11 +01:00
TQM866M.h Change all '$(...)' variable references into '${...}' 2005-11-20 21:40:11 +01:00
TQM5200.h Adjust "echo" as a default command 2006-03-12 16:51:59 +01:00
TQM8260.h Change all '$(...)' variable references into '${...}' 2005-11-20 21:40:11 +01:00
trab.h Change all '$(...)' variable references into '${...}' 2005-11-20 21:40:11 +01:00
uc100.h Change all '$(...)' variable references into '${...}' 2005-11-20 21:40:11 +01:00
utx8245.h Adjust "echo" as a default command 2006-03-12 16:51:59 +01:00
v37.h Change all '$(...)' variable references into '${...}' 2005-11-20 21:40:11 +01:00
VCMA9.h Fix JFFS2 support for legacy NAND driver. 2006-04-08 19:08:06 +02:00
versatile.h * Patch by Philippe Robin, 28 Sept 2004: 2004-10-11 22:51:13 +00:00
VOH405.h Re-factoring the legacy NAND code (legacy NAND now only in board-specific 2006-03-05 18:57:33 +01:00
voiceblue.h Change all '$(...)' variable references into '${...}' 2005-11-20 21:40:11 +01:00
VOM405.h New PPC 405EP board added: CMS700 2005-11-15 10:35:59 +01:00
VoVPN-GW.h Change all '$(...)' variable references into '${...}' 2005-11-20 21:40:11 +01:00
W7OLMC.h Cleanup (PPC4xx is AMCC now) 2005-09-23 11:05:55 +02:00
W7OLMG.h Cleanup (PPC4xx is AMCC now) 2005-09-23 11:05:55 +02:00
walnut.h Change all '$(...)' variable references into '${...}' 2005-11-20 21:40:11 +01:00
wepep250.h Patch by Steven Scholz, 4 Apr 2005: 2005-04-04 12:44:11 +00:00
WUH405.h Re-factoring the legacy NAND code (legacy NAND now only in board-specific 2006-03-05 18:57:33 +01:00
xaeniax.h Adjust configuration of XENIAX board 2005-08-04 19:45:01 +02:00
xm250.h Patch by Steven Scholz, 4 Apr 2005: 2005-04-04 12:44:11 +00:00
XPEDITE1K.h Cleanup (PPC4xx is AMCC now) 2005-09-23 11:05:55 +02:00
xsengine.h Add common (with Linux) MTD partition scheme and "mtdparts" command 2005-08-08 01:03:24 +02:00
yellowstone.h Change all '$(...)' variable references into '${...}' 2005-11-20 21:40:11 +01:00
yosemite.h Change all '$(...)' variable references into '${...}' 2005-11-20 21:40:11 +01:00
Yukon8220.h Add support for multiple PHYs. 2005-10-28 22:30:33 +02:00
ZPC1900.h Memory configuration changes for ZPC.1900 board 2006-03-12 01:45:44 +01:00
ZUMA.h Add common (with Linux) MTD partition scheme and "mtdparts" command 2005-08-08 01:03:24 +02:00
zylonite.h SDRAM now working for delta board, but there are still aliasing problems, 2006-02-22 14:05:44 +01:00