u-boot/include/configs
Stefan Roese e59581c56a [PATCH] Enable the IceCube/lite5200 variants to pass a device tree to Linux.
This patch adds the code and configuration necessary to boot with an
arch/powerpc Linux kernel.

Signed-off-by: Grant Likely <grant.likely@gmail.com>
Acked-by: Jon Loeliger <jdl@freescale.com>
2006-11-28 17:55:49 +01:00
..
A3000.h * Patches by Yuli Barcohen, 13 Jul 2003: 2003-07-14 22:13:32 +00:00
ADCIOP.h Cleanup (PPC4xx is AMCC now) 2005-09-23 11:05:55 +02:00
Adder.h Add support for Adder boards with 16MB SDRAM; 2006-03-12 01:43:03 +01:00
ADNPESC1.h Add common (with Linux) MTD partition scheme and "mtdparts" command 2005-08-08 01:03:24 +02:00
ADNPESC1_base_32.h * Patch by Stephan Linz, 09 Mar 2004 2004-03-14 15:20:55 +00:00
ADS860.h Patch by Yuli Barcohen, 19 Apr 2004: 2004-06-06 21:35:06 +00:00
adsvix.h Patch by Steven Scholz, 06 Apr 2005: 2005-04-06 13:52:31 +00:00
aev.h * Cleanup TQM5200 board configurations: 2006-07-21 11:16:34 +02:00
Alaska8220.h Add support for multiple PHYs. 2005-10-28 22:30:33 +02:00
alpr.h [PATCH] Remove testing 4xx enet PHY setup 2006-11-27 14:46:06 +01:00
AmigaOneG3SE.h * The PS/2 mux on the BMS2003 board needs 450 ms after power on 2004-01-20 23:12:12 +00:00
AMX860.h Change all '$(...)' variable references into '${...}' 2005-11-20 21:40:11 +01:00
AP1000.h Support passing of OF flat trees to the kernel. 2005-10-13 01:45:54 +02:00
APC405.h Change all '$(...)' variable references into '${...}' 2005-11-20 21:40:11 +01:00
AR405.h Cleanup (PPC4xx is AMCC now) 2005-09-23 11:05:55 +02:00
armadillo.h Add board support for armadillo HT1070 2005-09-26 01:06:33 +02:00
ASH405.h Re-factoring the legacy NAND code (legacy NAND now only in board-specific 2006-03-05 18:57:33 +01:00
assabet.h Patch by Steven Scholz, 4 Apr 2005: 2005-04-04 12:44:11 +00:00
at91rm9200dk.h Add support for multiple PHYs. 2005-10-28 22:30:33 +02:00
atc.h Change all '$(...)' variable references into '${...}' 2005-11-20 21:40:11 +01:00
atstk1002.h Add ATSTK1000 and ATSTK1002 board support 2006-10-24 14:42:37 +02:00
B2.h Patch by Steven Scholz, 4 Apr 2005: 2005-04-04 12:44:11 +00:00
BAB7xx.h Change all '$(...)' variable references into '${...}' 2005-11-20 21:40:11 +01:00
bamboo.h Add support for AMCC Sequoia PPC440EPx eval board 2006-09-07 11:51:23 +02:00
barco.h Support passing of OF flat trees to the kernel. 2005-10-13 01:45:54 +02:00
BC3450.h Coding Style cleanup 2006-05-03 01:24:04 +02:00
BMW.h Re-factoring the legacy NAND code (legacy NAND now only in board-specific 2006-03-05 18:57:33 +01:00
bubinga.h Add commandline history support to all AMCC eval boards 2006-08-07 14:33:32 +02:00
c2mon.h Change all '$(...)' variable references into '${...}' 2005-11-20 21:40:11 +01:00
CANBT.h Cleanup (PPC4xx is AMCC now) 2005-09-23 11:05:55 +02:00
canmb.h Change all '$(...)' variable references into '${...}' 2005-11-20 21:40:11 +01:00
CATcenter.h Fix JFFS2 support for legacy NAND driver. 2006-04-08 19:08:06 +02:00
CCM.h Change all '$(...)' variable references into '${...}' 2005-11-20 21:40:11 +01:00
cerf250.h Patch by Steven Scholz, 4 Apr 2005: 2005-04-04 12:44:11 +00:00
cm41xx.h * Extend burst mode RAM test program to take a loop count 2005-05-23 10:49:50 +00:00
cm4008.h * Extend burst mode RAM test program to take a loop count 2005-05-23 10:49:50 +00:00
cmc_pu2.h Update configuration for CMC-PU2 board 2006-06-16 16:43:33 +02:00
cmi_mpc5xx.h * Code cleanup: 2003-06-27 21:31:46 +00:00
CMS700.h Re-factoring the legacy NAND code (legacy NAND now only in board-specific 2006-03-05 18:57:33 +01:00
cobra5272.h Patch by Florian Schlote, 08 Sep 2004: 2005-01-09 18:21:42 +00:00
cogent_common.h * Patch by Shlomo Kut, 29 Mar 2004: 2004-09-29 11:02:56 +00:00
cogent_mpc8xx.h * The PS/2 mux on the BMS2003 board needs 450 ms after power on 2004-01-20 23:12:12 +00:00
cogent_mpc8260.h * Patch by Jon Loeliger, Kumar Gala 2005-02-08 2005-07-23 10:37:35 -05:00
CPC45.h Fix problems with SNTP support; 2005-04-02 22:37:54 +00:00
CPCI2DP.h PMC405 and CPCI405: Moved configuration of pci resources into config file. 2006-01-18 20:03:15 +01:00
CPCI405.h Re-factoring the legacy NAND code (legacy NAND now only in board-specific 2006-03-05 18:57:33 +01:00
CPCI405AB.h Re-factoring the legacy NAND code (legacy NAND now only in board-specific 2006-03-05 18:57:33 +01:00
CPCI405DT.h Re-factoring the legacy NAND code (legacy NAND now only in board-specific 2006-03-05 18:57:33 +01:00
CPCI440.h Fix build problem with CPCI440 2006-09-07 12:48:49 +02:00
CPCI750.h README says CFG_AUTO_COMPLETE, but ocde uses CONFIG_AUTO_COMPLETE 2006-10-28 02:28:02 +02:00
CPCI4052.h Re-factoring the legacy NAND code (legacy NAND now only in board-specific 2006-03-05 18:57:33 +01:00
cpci5200.h Change all '$(...)' variable references into '${...}' 2005-11-20 21:40:11 +01:00
CPCIISER4.h Cleanup (PPC4xx is AMCC now) 2005-09-23 11:05:55 +02:00
CPU86.h Fix JFFS2 support for legacy NAND driver. 2006-04-08 19:08:06 +02:00
CPU87.h Code cleanup 2006-08-27 18:10:01 +02:00
cradle.h Patch by Steven Scholz, 4 Apr 2005: 2005-04-04 12:44:11 +00:00
CRAYL1.h * The PS/2 mux on the BMS2003 board needs 450 ms after power on 2004-01-20 23:12:12 +00:00
csb226.h Patch by Steven Scholz, 4 Apr 2005: 2005-04-04 12:44:11 +00:00
csb272.h Change all '$(...)' variable references into '${...}' 2005-11-20 21:40:11 +01:00
csb472.h Change all '$(...)' variable references into '${...}' 2005-11-20 21:40:11 +01:00
csb637.h Fix the machine-id of the Cogent csb637 board 2005-10-06 01:26:16 +02:00
CU824.h Fix problems with SNTP support; 2005-04-02 22:37:54 +00:00
DASA_SIM.h Cleanup (PPC4xx is AMCC now) 2005-09-23 11:05:55 +02:00
DB64360.h Change all '$(...)' variable references into '${...}' 2005-11-20 21:40:11 +01:00
DB64460.h Change all '$(...)' variable references into '${...}' 2005-11-20 21:40:11 +01:00
dbau1x00.h * Fix dbau1x00 Board 2006-04-11 14:53:29 +02:00
debris.h Change all '$(...)' variable references into '${...}' 2005-11-20 21:40:11 +01:00
delta.h delta board: support for magic key detection and handling. 2006-04-25 10:03:01 +02:00
DK1C20.h Add common (with Linux) MTD partition scheme and "mtdparts" command 2005-08-08 01:03:24 +02:00
DK1C20_safe_32.h Patches by Stephan Linz, 30 Jan 2004: 2004-02-09 23:12:24 +00:00
DK1C20_standard_32.h Patches by Stephan Linz, 30 Jan 2004: 2004-02-09 23:12:24 +00:00
DK1S10.h Add common (with Linux) MTD partition scheme and "mtdparts" command 2005-08-08 01:03:24 +02:00
DK1S10_mtx_ldk_20.h Patches by Stephan Linz, 30 Jan 2004: 2004-02-09 23:12:24 +00:00
DK1S10_safe_32.h Patches by Stephan Linz, 30 Jan 2004: 2004-02-09 23:12:24 +00:00
DK1S10_standard_32.h Patches by Stephan Linz, 30 Jan 2004: 2004-02-09 23:12:24 +00:00
dnp1110.h Patch by Steven Scholz, 4 Apr 2005: 2005-04-04 12:44:11 +00:00
DP405.h Cleanup (PPC4xx is AMCC now) 2005-09-23 11:05:55 +02:00
DU405.h Cleanup (PPC4xx is AMCC now) 2005-09-23 11:05:55 +02:00
EB+MCF-EV123.h Minor code cleanup. 2006-06-10 22:00:40 +02:00
ebony.h Add commandline history support to all AMCC eval boards 2006-08-07 14:33:32 +02:00
ELPPC.h Change all '$(...)' variable references into '${...}' 2005-11-20 21:40:11 +01:00
ELPT860.h Change all '$(...)' variable references into '${...}' 2005-11-20 21:40:11 +01:00
EP1C20.h Nios II - Add Altera EP1C20, EP1S10 and EP1S40 boards 2006-06-08 13:37:39 -04:00
EP1S10.h Nios II - Add Altera EP1C20, EP1S10 and EP1S40 boards 2006-06-08 13:37:39 -04:00
EP1S40.h Nios II - Add Altera EP1C20, EP1S10 and EP1S40 boards 2006-06-08 13:37:39 -04:00
ep82xxm.h README says CFG_AUTO_COMPLETE, but ocde uses CONFIG_AUTO_COMPLETE 2006-10-28 02:28:02 +02:00
EP88x.h Add support for EmbeddedPlanet EP88x boards 2006-03-12 23:17:31 +01:00
ep7312.h Add common (with Linux) MTD partition scheme and "mtdparts" command 2005-08-08 01:03:24 +02:00
ep8248.h Add support for ep8248 board 2005-08-06 01:42:58 +02:00
ep8260.h Update ep8260: Fix flash timeouts; improve clock resolution for faster UARTs 2005-09-25 16:56:15 +02:00
ERIC.h Cleanup (PPC4xx is AMCC now) 2005-09-23 11:05:55 +02:00
ESTEEM192E.h * Code cleanup: 2003-06-27 21:31:46 +00:00
ETX094.h Change all '$(...)' variable references into '${...}' 2005-11-20 21:40:11 +01:00
evb4510.h Patch by Steven Scholz, 4 Apr 2005: 2005-04-04 12:44:11 +00:00
EVB64260.h Add common (with Linux) MTD partition scheme and "mtdparts" command 2005-08-08 01:03:24 +02:00
eXalion.h * Patch by Pierre Aubert, 26 Feb 2004 2004-02-27 08:20:54 +00:00
EXBITGEN.h * The PS/2 mux on the BMS2003 board needs 450 ms after power on 2004-01-20 23:12:12 +00:00
ezkit533.h Coding Style cleanup 2006-03-12 02:55:22 +01:00
FADS823.h Change all '$(...)' variable references into '${...}' 2005-11-20 21:40:11 +01:00
FADS850SAR.h * Patch by Robert Schwebel, 10 Jun 2004: 2004-06-10 21:34:36 +00:00
FADS860T.h Patch by Yuli Barcohen, 19 Apr 2004: 2004-06-06 21:35:06 +00:00
FLAGADM.h
FPS850L.h * Fix flash parameters passed to Linux for PPChameleon board 2004-06-17 18:50:45 +00:00
FPS860L.h Fix problems with SNTP support; 2005-04-02 22:37:54 +00:00
G2000.h Change all '$(...)' variable references into '${...}' 2005-11-20 21:40:11 +01:00
gcplus.h Patch by Steven Scholz, 4 Apr 2005: 2005-04-04 12:44:11 +00:00
GEN860T.h Re-factoring the legacy NAND code (legacy NAND now only in board-specific 2006-03-05 18:57:33 +01:00
GENIETV.h Change all '$(...)' variable references into '${...}' 2005-11-20 21:40:11 +01:00
GTH.h
gth2.h Add support for TB5200 board 2006-07-19 13:50:38 +02:00
gw8260.h Adjust "echo" as a default command 2006-03-12 16:51:59 +01:00
h2_p2_dbg_board.h * Code cleanup (ARM mostly) 2004-07-01 16:30:44 +00:00
hermes.h Change all '$(...)' variable references into '${...}' 2005-11-20 21:40:11 +01:00
HH405.h Merge the new NAND code (testing-NAND brach); see doc/README.nand 2006-03-06 11:25:22 +01:00
HIDDEN_DRAGON.h * Patch by Yusdi Santoso, 22 Oct 2004: 2005-04-03 15:51:42 +00:00
HMI10.h Change all '$(...)' variable references into '${...}' 2005-11-20 21:40:11 +01:00
hmi1001.h Change all '$(...)' variable references into '${...}' 2005-11-20 21:40:11 +01:00
HUB405.h Re-factoring the legacy NAND code (legacy NAND now only in board-specific 2006-03-05 18:57:33 +01:00
hymod.h * Fix PHY address argument passing with mii info command 2005-09-24 21:54:50 +02:00
IAD210.h Change all '$(...)' variable references into '${...}' 2005-11-20 21:40:11 +01:00
IceCube.h [PATCH] Enable the IceCube/lite5200 variants to pass a device tree to Linux. 2006-11-28 17:55:49 +01:00
ICU862.h Change all '$(...)' variable references into '${...}' 2005-11-20 21:40:11 +01:00
IDS8247.h Fix JFFS2 support for legacy NAND driver. 2006-04-08 19:08:06 +02:00
impa7.h Add common (with Linux) MTD partition scheme and "mtdparts" command 2005-08-08 01:03:24 +02:00
incaip.h Change all '$(...)' variable references into '${...}' 2005-11-20 21:40:11 +01:00
inka4x0.h Update default environment for INKA4x00 board. 2006-02-07 15:18:25 +01:00
innokom.h Add common (with Linux) MTD partition scheme and "mtdparts" command 2005-08-08 01:03:24 +02:00
integratorap.h Update ARM Integrator boards: 2005-10-04 23:10:28 +02:00
integratorcp.h Update ARM Integrator boards: 2005-10-04 23:10:28 +02:00
IP860.h Change all '$(...)' variable references into '${...}' 2005-11-20 21:40:11 +01:00
IPHASE4539.h * Patch by Jon Loeliger, Kumar Gala 2005-02-08 2005-07-23 10:37:35 -05:00
ISPAN.h Adjust "echo" as a default command 2006-03-12 16:51:59 +01:00
IVML24.h * Patch by Martin Krause, 17 Jul 2003: 2003-07-17 23:16:40 +00:00
IVMS8.h * Patch by Martin Krause, 17 Jul 2003: 2003-07-17 23:16:40 +00:00
ixdp425.h * Update Intel IXP4xx support 2006-05-30 15:56:48 +02:00
ixdpg425.h * Update Intel IXP4xx support 2006-05-30 15:56:48 +02:00
JSE.h Fix device partition intialization for SystemACE disks. 2005-10-05 00:25:17 +02:00
KAREF.h README says CFG_AUTO_COMPLETE, but ocde uses CONFIG_AUTO_COMPLETE 2006-10-28 02:28:02 +02:00
kb9202.h Complete support for the KwikByte KB920x boards 2005-10-06 01:22:22 +02:00
KUP4K.h Change all '$(...)' variable references into '${...}' 2005-11-20 21:40:11 +01:00
KUP4X.h Change all '$(...)' variable references into '${...}' 2005-11-20 21:40:11 +01:00
kvme080.h Add support for KVME080 board 2006-07-21 11:29:20 +02:00
LANTEC.h * Fix PHY address argument passing with mii info command 2005-09-24 21:54:50 +02:00
lart.h Patch by Steven Scholz, 4 Apr 2005: 2005-04-04 12:44:11 +00:00
logodl.h Patch by Steven Scholz, 4 Apr 2005: 2005-04-04 12:44:11 +00:00
lpd7a400-10.h * Patch by Paul Ruhland, 10 Jun 2004: 2004-06-10 21:55:33 +00:00
lpd7a400.h Patch by Steven Scholz, 4 Apr 2005: 2005-04-04 12:44:11 +00:00
lpd7a404-10.h * Patch by Paul Ruhland, 10 Jun 2004: 2004-06-10 21:55:33 +00:00
lpd7a404.h Patch by Steven Scholz, 4 Apr 2005: 2005-04-04 12:44:11 +00:00
luan.h Add commandline history support to all AMCC eval boards 2006-08-07 14:33:32 +02:00
lubbock.h Fixes to the Lubbock (PXA 25x) support: 2005-09-26 00:29:53 +02:00
lwmon.h * Patch by Detlev Zundel, 30 Jun 2005: 2005-07-04 00:03:16 +00:00
M5271EVB.h Enable autoboot for M5271EVB board. 2006-05-17 12:16:26 +02:00
M5272C3.h * Some code cleanup 2004-02-12 00:47:09 +00:00
M5282EVB.h * Some code cleanup 2004-02-12 00:47:09 +00:00
MBX.h * Code cleanup: 2003-06-27 21:31:46 +00:00
MBX860T.h
mcc200.h Fixed problems on PRS200 board caused by adding splash screen on MCC200 2006-09-03 18:17:46 +02:00
METROBOX.h README says CFG_AUTO_COMPLETE, but ocde uses CONFIG_AUTO_COMPLETE 2006-10-28 02:28:02 +02:00
MHPC.h Change all '$(...)' variable references into '${...}' 2005-11-20 21:40:11 +01:00
MIP405.h Adjust "echo" as a default command 2006-03-12 16:51:59 +01:00
ML2.h Cleanup (PPC4xx is AMCC now) 2005-09-23 11:05:55 +02:00
ml300.h Cleanup (PPC4xx is AMCC now) 2005-09-23 11:05:55 +02:00
modnet50.h Add common (with Linux) MTD partition scheme and "mtdparts" command 2005-08-08 01:03:24 +02:00
MOUSSE.h * Code cleanup: 2003-06-27 21:31:46 +00:00
mp2usb.h Add support for AT91RM9200 OHCI Controller. 2005-09-26 01:26:56 +02:00
MPC86xADS.h Switch MPC86xADS and MPC885ADS boards to use cpuclk environment 2006-03-12 01:55:43 +01:00
MPC885ADS.h Switch MPC86xADS and MPC885ADS boards to use cpuclk environment 2006-03-12 01:55:43 +01:00
MPC8260ADS.h Add board support for armadillo HT1070 2005-09-26 01:06:33 +02:00
MPC8266ADS.h Change all '$(...)' variable references into '${...}' 2005-11-20 21:40:11 +01:00
MPC8349EMDS.h Minor cleanup. 2006-05-10 17:43:20 +02:00
MPC8540ADS.h Converted all 85xx boards to use a common FSL I2C driver. 2006-10-20 15:50:15 -05:00
MPC8540EVAL.h Converted all 85xx boards to use a common FSL I2C driver. 2006-10-20 15:50:15 -05:00
MPC8541CDS.h Converted all 85xx boards to use a common FSL I2C driver. 2006-10-20 15:50:15 -05:00
MPC8548CDS.h Merge with /home/wd/git/u-boot/master 2006-10-24 17:08:31 +02:00
MPC8555CDS.h Converted all 85xx boards to use a common FSL I2C driver. 2006-10-20 15:50:15 -05:00
MPC8560ADS.h Converted all 85xx boards to use a common FSL I2C driver. 2006-10-20 15:50:15 -05:00
MPC8641HPCN.h Converted all 85xx boards to use a common FSL I2C driver. 2006-10-20 15:50:15 -05:00
MUSENKI.h * Code cleanup: 2003-06-27 21:31:46 +00:00
MVBLUE.h Change all '$(...)' variable references into '${...}' 2005-11-20 21:40:11 +01:00
MVS1.h Change all '$(...)' variable references into '${...}' 2005-11-20 21:40:11 +01:00
mx1ads.h Patch by Steven Scholz, 4 Apr 2005: 2005-04-04 12:44:11 +00:00
mx1fs2.h Add common (with Linux) MTD partition scheme and "mtdparts" command 2005-08-08 01:03:24 +02:00
NC650.h Update for NC650 board. Add NC650 based CP850 configuration. 2006-04-19 11:52:46 +02:00
NETPHONE.h Re-factoring the legacy NAND code (legacy NAND now only in board-specific 2006-03-05 18:57:33 +01:00
netstar.h Re-factoring the legacy NAND code (legacy NAND now only in board-specific 2006-03-05 18:57:33 +01:00
NETTA.h Fix JFFS2 support for legacy NAND driver. 2006-04-08 19:08:06 +02:00
NETTA2.h Re-factoring the legacy NAND code (legacy NAND now only in board-specific 2006-03-05 18:57:33 +01:00
NETVIA.h Re-factoring the legacy NAND code (legacy NAND now only in board-specific 2006-03-05 18:57:33 +01:00
ns9750dev.h Patch by Steven Scholz, 4 Apr 2005: 2005-04-04 12:44:11 +00:00
NSCU.h Change all '$(...)' variable references into '${...}' 2005-11-20 21:40:11 +01:00
NX823.h
o2dnt.h Change port configuration for O2DNT (CODEC1 on PSC1) 2005-12-06 20:33:07 +01:00
ocotea.h Add commandline history support to all AMCC eval boards 2006-08-07 14:33:32 +02:00
OCRTC.h Cleanup (PPC4xx is AMCC now) 2005-09-23 11:05:55 +02:00
omap730.h * Patch by Rishi Bhattacharya, 08 May 2004: 2004-06-08 00:22:43 +00:00
omap730p2.h Patch by Steven Scholz, 4 Apr 2005: 2005-04-04 12:44:11 +00:00
omap1510.h Add support for Siemens SX1 mobile phone; 2004-03-12 00:14:09 +00:00
omap1510inn.h Patch by Steven Scholz, 4 Apr 2005: 2005-04-04 12:44:11 +00:00
omap1610h2.h Patch by Steven Scholz, 4 Apr 2005: 2005-04-04 12:44:11 +00:00
omap1610inn.h Patch by Steven Scholz, 4 Apr 2005: 2005-04-04 12:44:11 +00:00
omap2420h4.h Fix JFFS2 support for legacy NAND driver. 2006-04-08 19:08:06 +02:00
omap5912osk.h Update omap5912osk board support 2006-05-10 10:55:16 +02:00
ORSG.h Cleanup (PPC4xx is AMCC now) 2005-09-23 11:05:55 +02:00
OXC.h * Patch by Mark Jonas: Remove config.tmp files only when 2004-04-08 22:31:29 +00:00
P3G4.h Change all '$(...)' variable references into '${...}' 2005-11-20 21:40:11 +01:00
p3p440.h Merge with /home/sr/git/u-boot/cfi-flash 2006-04-06 00:16:58 +02:00
PATI.h * Patch by Ronen Shitrit, 10 Dec 2003: 2004-01-03 00:43:19 +00:00
pb1x00.h Change all '$(...)' variable references into '${...}' 2005-11-20 21:40:11 +01:00
PCI405.h Cleanup (PPC4xx is AMCC now) 2005-09-23 11:05:55 +02:00
PCI5441.h Patches by Scott McNutt, 24 Aug 2004: 2004-10-10 21:27:30 +00:00
PCIPPC2.h Re-factoring the legacy NAND code (legacy NAND now only in board-specific 2006-03-05 18:57:33 +01:00
PCIPPC6.h Re-factoring the legacy NAND code (legacy NAND now only in board-specific 2006-03-05 18:57:33 +01:00
pcs440ep.h Add support for AMCC Sequoia PPC440EPx eval board 2006-09-07 11:51:23 +02:00
pcu_e.h Change all '$(...)' variable references into '${...}' 2005-11-20 21:40:11 +01:00
pdnb3.h * Update Intel IXP4xx support 2006-05-30 15:56:48 +02:00
pf5200.h Change all '$(...)' variable references into '${...}' 2005-11-20 21:40:11 +01:00
PIP405.h Adjust "echo" as a default command 2006-03-12 16:51:59 +01:00
PK1C20.h Update PK1C20 board 2006-06-08 12:03:21 -04:00
pleb2.h Patch by Steven Scholz, 4 Apr 2005: 2005-04-04 12:44:11 +00:00
PLU405.h Re-factoring the legacy NAND code (legacy NAND now only in board-specific 2006-03-05 18:57:33 +01:00
PM520.h Re-factoring the legacy NAND code (legacy NAND now only in board-specific 2006-03-05 18:57:33 +01:00
PM826.h Re-factoring the legacy NAND code (legacy NAND now only in board-specific 2006-03-05 18:57:33 +01:00
PM828.h Re-factoring the legacy NAND code (legacy NAND now only in board-specific 2006-03-05 18:57:33 +01:00
PM854.h Converted all 85xx boards to use a common FSL I2C driver. 2006-10-20 15:50:15 -05:00
PM856.h Converted all 85xx boards to use a common FSL I2C driver. 2006-10-20 15:50:15 -05:00
PMC405.h PMC405 and CPCI405: Moved configuration of pci resources into config file. 2006-01-18 20:03:15 +01:00
PN62.h Change all '$(...)' variable references into '${...}' 2005-11-20 21:40:11 +01:00
PPChameleonEVB.h Updates to common PPC4xx onboard (DDR)SDRAM init code (405 and 440) 2006-03-31 14:32:07 +02:00
ppmc7xx.h Add support for TB5200 board 2006-07-19 13:50:38 +02:00
ppmc8260.h Adjust "echo" as a default command 2006-03-12 16:51:59 +01:00
purple.h Change all '$(...)' variable references into '${...}' 2005-11-20 21:40:11 +01:00
pxa255_idp.h Add Vibren (was Accelent) PXA255 IDP Support 2005-09-25 15:59:01 +02:00
QS823.h Patch by Wolter Kamphuis, 05 Dec 2003: 2003-12-07 22:27:15 +00:00
QS850.h Patch by Wolter Kamphuis, 05 Dec 2003: 2003-12-07 22:27:15 +00:00
QS860T.h Change all '$(...)' variable references into '${...}' 2005-11-20 21:40:11 +01:00
quantum.h Change all '$(...)' variable references into '${...}' 2005-11-20 21:40:11 +01:00
R360MPI.h Change all '$(...)' variable references into '${...}' 2005-11-20 21:40:11 +01:00
r5200.h Minor cleanup. 2006-05-10 17:43:20 +02:00
Rattler.h Adjust "echo" as a default command 2006-03-12 16:51:59 +01:00
RBC823.h Fix JFFS2 support for legacy NAND driver. 2006-04-08 19:08:06 +02:00
rmu.h Change all '$(...)' variable references into '${...}' 2005-11-20 21:40:11 +01:00
RPXClassic.h Change all '$(...)' variable references into '${...}' 2005-11-20 21:40:11 +01:00
RPXlite.h RPXlite configuration fixes 2006-03-12 01:48:55 +01:00
RPXlite_DW.h Add support for Lite5200B board. 2006-03-17 11:42:53 +01:00
RPXsuper.h Adjust "echo" as a default command 2006-03-12 16:51:59 +01:00
RRvision.h Change all '$(...)' variable references into '${...}' 2005-11-20 21:40:11 +01:00
rsdproto.h * Patch by Jon Loeliger, Kumar Gala 2005-02-08 2005-07-23 10:37:35 -05:00
sacsng.h Adjust "echo" as a default command 2006-03-12 16:51:59 +01:00
Sandpoint8240.h Change all '$(...)' variable references into '${...}' 2005-11-20 21:40:11 +01:00
Sandpoint8245.h Fix problems with SNTP support; 2005-04-02 22:37:54 +00:00
sbc405.h Change all '$(...)' variable references into '${...}' 2005-11-20 21:40:11 +01:00
sbc2410x.h Code cleanup 2006-07-21 11:56:05 +02:00
sbc8240.h * Rename SBC8560 into sbc8560 for consistency 2004-07-10 22:35:59 +00:00
sbc8260.h Adjust "echo" as a default command 2006-03-12 16:51:59 +01:00
SBC8540.h Converted all 85xx boards to use a common FSL I2C driver. 2006-10-20 15:50:15 -05:00
sbc8560.h Converted all 85xx boards to use a common FSL I2C driver. 2006-10-20 15:50:15 -05:00
SBC8560.h * Patch by Jon Loeliger, 2005-05-05 2005-07-25 14:05:07 -05:00
sc520_cdp.h Add common (with Linux) MTD partition scheme and "mtdparts" command 2005-08-08 01:03:24 +02:00
sc520_spunk.h Add common (with Linux) MTD partition scheme and "mtdparts" command 2005-08-08 01:03:24 +02:00
sc520_spunk_rel.h * Code cleanup: 2003-06-27 21:31:46 +00:00
scb9328.h Patch by Steven Scholz, 4 Apr 2005: 2005-04-04 12:44:11 +00:00
SCM.h Change all '$(...)' variable references into '${...}' 2005-11-20 21:40:11 +01:00
sequoia.h [PATCH] Select NAND embedded environment from board configuration 2006-11-27 17:34:10 +01:00
shannon.h Patch by Steven Scholz, 4 Apr 2005: 2005-04-04 12:44:11 +00:00
SL8245.h * Add support for USB Mass Storage Devices (BBB) 2003-09-10 18:20:28 +00:00
SM850.h Change all '$(...)' variable references into '${...}' 2005-11-20 21:40:11 +01:00
smdk2400.h Patch by Steven Scholz, 4 Apr 2005: 2005-04-04 12:44:11 +00:00
smdk2410.h Patch by Steven Scholz, 4 Apr 2005: 2005-04-04 12:44:11 +00:00
smmaco4.h Rename SMMACO4 board into smmaco4 for consistency with Linux. 2006-02-22 10:25:39 +01:00
sorcery.h Fix build problems on sorcery board. 2006-09-04 02:01:27 +02:00
spc1920.h Support for spc1920 board. 2006-07-12 08:48:24 +02:00
SPD823TS.h * Patch by Martin Krause, 17 Jul 2003: 2003-07-17 23:16:40 +00:00
spieval.h * Cleanup TQM5200 board configurations: 2006-07-21 11:16:34 +02:00
stamp.h Coding Style cleanup 2006-03-12 02:55:22 +01:00
stxgp3.h Converted all 85xx boards to use a common FSL I2C driver. 2006-10-20 15:50:15 -05:00
stxxtc.h Fix JFFS2 support for legacy NAND driver. 2006-04-08 19:08:06 +02:00
suzaku.h Patch by Steven Scholz, 4 Apr 2005: 2005-04-04 12:44:11 +00:00
svm_sc8xx.h Re-factoring the legacy NAND code (legacy NAND now only in board-specific 2006-03-05 18:57:33 +01:00
SX1.h Patch by Steven Scholz, 4 Apr 2005: 2005-04-04 12:44:11 +00:00
SXNI855T.h Re-factoring the legacy NAND code (legacy NAND now only in board-specific 2006-03-05 18:57:33 +01:00
TASREG.h Code cleanup. 2004-12-16 21:44:03 +00:00
tb0229.h Change all '$(...)' variable references into '${...}' 2005-11-20 21:40:11 +01:00
TB5200.h * Cleanup TQM5200 board configurations: 2006-07-21 11:16:34 +02:00
TOP860.h Change all '$(...)' variable references into '${...}' 2005-11-20 21:40:11 +01:00
TOP5200.h Change all '$(...)' variable references into '${...}' 2005-11-20 21:40:11 +01:00
Total5200.h Change all '$(...)' variable references into '${...}' 2005-11-20 21:40:11 +01:00
TQM85xx.h Enable commandline editing and hush shell on all TQM boards. 2006-10-28 02:29:14 +02:00
TQM823L.h Enable commandline editing and hush shell on all TQM boards. 2006-10-28 02:29:14 +02:00
TQM823M.h Enable commandline editing and hush shell on all TQM boards. 2006-10-28 02:29:14 +02:00
TQM834x.h Enable commandline editing and hush shell on all TQM boards. 2006-10-28 02:29:14 +02:00
TQM850L.h Enable commandline editing and hush shell on all TQM boards. 2006-10-28 02:29:14 +02:00
TQM850M.h Enable commandline editing and hush shell on all TQM boards. 2006-10-28 02:29:14 +02:00
TQM855L.h Enable commandline editing and hush shell on all TQM boards. 2006-10-28 02:29:14 +02:00
TQM855M.h Enable commandline editing and hush shell on all TQM boards. 2006-10-28 02:29:14 +02:00
TQM860L.h Enable commandline editing and hush shell on all TQM boards. 2006-10-28 02:29:14 +02:00
TQM860M.h Enable commandline editing and hush shell on all TQM boards. 2006-10-28 02:29:14 +02:00
TQM862L.h Enable commandline editing and hush shell on all TQM boards. 2006-10-28 02:29:14 +02:00
TQM862M.h Enable commandline editing and hush shell on all TQM boards. 2006-10-28 02:29:14 +02:00
TQM866M.h Enable commandline editing and hush shell on all TQM boards. 2006-10-28 02:29:14 +02:00
TQM885D.h Enable commandline editing and hush shell on all TQM boards. 2006-10-28 02:29:14 +02:00
TQM5200.h Updates for TQM5200 modules: 2006-11-23 22:58:58 +01:00
TQM8260.h Enable commandline editing and hush shell on all TQM boards. 2006-10-28 02:29:14 +02:00
trab.h Fix some bugs in TRAB board flash driver. 2006-07-19 14:13:02 +02:00
uc100.h Change all '$(...)' variable references into '${...}' 2005-11-20 21:40:11 +01:00
utx8245.h Adjust "echo" as a default command 2006-03-12 16:51:59 +01:00
v37.h Change all '$(...)' variable references into '${...}' 2005-11-20 21:40:11 +01:00
v38b.h Disable the watchdog in the default config for the V38B board. 2006-11-11 22:48:22 +01:00
VCMA9.h Fix JFFS2 support for legacy NAND driver. 2006-04-08 19:08:06 +02:00
versatile.h * Patch by Philippe Robin, 28 Sept 2004: 2004-10-11 22:51:13 +00:00
virtlab2.h Add support for VirtLab2 board 2006-05-12 16:15:46 +02:00
VOH405.h Re-factoring the legacy NAND code (legacy NAND now only in board-specific 2006-03-05 18:57:33 +01:00
voiceblue.h VoiceBlue update: use new MTD flash partitioning methods, use more 2006-05-03 08:34:03 +02:00
VOM405.h New PPC 405EP board added: CMS700 2005-11-15 10:35:59 +01:00
VoVPN-GW.h Change all '$(...)' variable references into '${...}' 2005-11-20 21:40:11 +01:00
W7OLMC.h Cleanup (PPC4xx is AMCC now) 2005-09-23 11:05:55 +02:00
W7OLMG.h Cleanup (PPC4xx is AMCC now) 2005-09-23 11:05:55 +02:00
walnut.h Add commandline history support to all AMCC eval boards 2006-08-07 14:33:32 +02:00
wepep250.h Patch by Steven Scholz, 4 Apr 2005: 2005-04-04 12:44:11 +00:00
WUH405.h Re-factoring the legacy NAND code (legacy NAND now only in board-specific 2006-03-05 18:57:33 +01:00
xaeniax.h Adjust configuration of XENIAX board 2005-08-04 19:45:01 +02:00
xm250.h Enable initrd ATAG for xm250 board. 2006-07-21 11:36:48 +02:00
XPEDITE1K.h Cleanup (PPC4xx is AMCC now) 2005-09-23 11:05:55 +02:00
xsengine.h Add common (with Linux) MTD partition scheme and "mtdparts" command 2005-08-08 01:03:24 +02:00
yellowstone.h Add CONFIG_BOARD_RESET to configure board specific reset function 2006-10-07 11:30:52 +02:00
yosemite.h Add CONFIG_BOARD_RESET to configure board specific reset function 2006-10-07 11:30:52 +02:00
yucca.h Cleanup debug code for yucca board. 2006-08-17 10:48:36 +02:00
Yukon8220.h Add support for multiple PHYs. 2005-10-28 22:30:33 +02:00
ZPC1900.h Memory configuration changes for ZPC.1900 board 2006-03-12 01:45:44 +01:00
ZUMA.h Add common (with Linux) MTD partition scheme and "mtdparts" command 2005-08-08 01:03:24 +02:00
zylonite.h NAND support for zylonite board + some minor cleanup. 2006-04-25 16:48:48 +02:00