u-boot/arch/arm/include/asm/arch-sunxi
Icenowy Zheng 9946631a0f sunxi: add clock configuration of R40 sata
R40 has a similar SATA controller with the ones on A10/A20, but with a
reset line added (like other peripherals on sun6i+), and two extra VDD
pins added (1.2v and 2.5v).

Add clock configuration of R40 SATA.

Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2017-05-02 09:21:09 +02:00
..
boot0.h sunxi: A64: do an RMR switch if started in AArch32 mode 2017-01-04 16:37:42 +01:00
clock.h sunxi: Add support for Allwinner A64 SoCs 2016-04-01 09:52:28 +02:00
clock_sun4i.h sunxi: Add missing macros to configure the NAND controller clk 2016-07-24 20:36:28 -05:00
clock_sun6i.h sunxi: add clock configuration of R40 sata 2017-05-02 09:21:09 +02:00
clock_sun8i_a83t.h sunxi: clk: Fix USB PHY clock macros for A83T 2016-03-31 17:04:08 +02:00
clock_sun9i.h sunxi: add initial clock setup for sun9i for SPL 2016-10-30 11:38:04 +01:00
cpu.h sunxi: Use H3/A64 DRAM initialization code for R40 2017-04-20 13:30:01 +02:00
cpu_sun4i.h sunxi: video: Add A64/H3/H5 HDMI driver 2017-04-28 09:21:25 +02:00
cpu_sun9i.h sunxi: Add support for SID e-fuses on sun9i 2016-10-30 11:38:04 +01:00
cpucfg.h sunxi: Add CPUCFG debug lock and sun7i cpu power controls 2016-06-20 22:44:00 +02:00
display.h sunxi: video: Split out TCON code 2017-04-20 13:34:50 +02:00
display2.h sunxi: video: Add A64/H3/H5 HDMI driver 2017-04-28 09:21:25 +02:00
dma.h sunxi: Add DMA definitions 2015-05-29 13:46:36 +02:00
dma_sun4i.h sunxi: Add DMA definitions 2015-05-29 13:46:36 +02:00
dram.h sunxi: Use H3/A64 DRAM initialization code for R40 2017-04-20 13:30:01 +02:00
dram_sun4i.h sunxi: Make DRAM_ODT_EN Kconfig setting a bool 2015-05-19 18:46:44 +02:00
dram_sun6i.h sun6i: Add dram initialization code 2014-11-13 14:49:01 +01:00
dram_sun8i_a23.h sunxi: Make DRAM_ODT_EN Kconfig setting a bool 2015-05-19 18:46:44 +02:00
dram_sun8i_a33.h sunxi: Add a33 dram init code 2015-05-04 16:51:51 +02:00
dram_sun8i_a83t.h sunxi: Add support for LPDDR3 for A83T 2016-01-26 16:20:05 +01:00
dram_sun8i_h3.h sunxi: Use H3/A64 DRAM initialization code for R40 2017-04-20 13:30:01 +02:00
dram_sun9i.h sunxi: DRAM initialisation for sun9i 2016-10-30 11:38:04 +01:00
gpio.h sunxi: add basic V3s support 2017-04-21 09:23:17 +02:00
gtbus.h sunxi: add gtbus-initialisation for sun9i 2016-10-30 11:38:04 +01:00
gtbus_sun9i.h sunxi: add gtbus-initialisation for sun9i 2016-10-30 11:38:04 +01:00
i2c.h sunxi: Add support for the I2C controller which is part of the PRCM 2016-01-21 07:30:01 +01:00
lcdc.h sunxi: video: Convert lcdc to use struct display_timing 2017-04-20 13:34:52 +02:00
mmc.h sunxi: Use BROM stored boot_media value to determine our boot-source 2016-07-15 15:54:56 +02:00
p2wi.h sun6i: Add new p2wi controller driver 2014-11-13 14:49:01 +01:00
pmic_bus.h sunxi: axp: Move axp pmic register helpers to a separate file 2015-05-04 16:51:53 +02:00
prcm.h sunxi: Group cpu core related controls together 2016-06-20 22:44:00 +02:00
pwm.h sunxi: display: Use PWM to drive backlight where applicable 2016-08-26 16:58:37 +02:00
rsb.h sunxi: rsb: Move rsb_set_device_mode() call to rsb_init() 2015-02-02 13:55:14 +01:00
spl.h sunxi: Kconfig: introduce CONFIG_SUNXI_HIGH_SRAM 2017-04-05 15:03:17 +05:30
sys_proto.h sunxi: Fix gmac not working due to cpu_eth_init no longer being called 2016-03-23 22:04:13 +01:00
timer.h sunxi: Fix watchdog reset function for R40 2017-04-20 13:30:00 +02:00
tzpc.h sunxi: Support Secure Memory Touch Arbiter (SMTA) in sun8i H3 2016-01-26 16:20:04 +01:00
usb_phy.h sunxi: musb: Power off OTG port VBUS when disabled 2016-09-17 14:37:40 +02:00
watchdog.h sunxi: Fix watchdog reset function for R40 2017-04-20 13:30:00 +02:00