u-boot/doc
Tom Rini 21e25992c8 Add new STM32 MCU boards and Documentation
STM32 programmer improvements
 video: support several LTDC HW versions and fix data enable polarity
 board: fix stboard error message, consider USB cable connected when boot device is USB
 configs: stm32mp1: set console variable for extlinux.conf
 configs: stm32mp1: add support for baudrate higher than 115200 for ST-Link
 ARM: stm32mp: Fix Silicon version handling and ft_system_setup()
 phy: stm32-usbphyc: Add DT phy tuning support
 arm: dts: stm32mp15: alignment with v5.18
 ram: Conditionally enable ASR
 mach-stm32mp: psci: retain MCUDIVR, PLL3CR, PLL4CR, MSSCKSELR across suspend
 configs: Use TFTP_TSIZE on DHSOM and STMicroelectronics boards
 ARM: stm32: Use default CONFIG_TFTP_BLOCKSIZE on DHSOM
 pinctrl: stm32: rework GPIO holes management
 -----BEGIN PGP SIGNATURE-----
 
 iQJQBAABCgA6FiEEXyrViUccKBz9c35Jysd4L3sz/6YFAmJ6U4QcHHBhdHJpY2Uu
 Y2hvdGFyZEBmb3NzLnN0LmNvbQAKCRDKx3gvezP/pg4SEACFSVRcCa/7r2QXObqk
 mORtlp6OrZLfCQGMugv9Oj0W+L4nanJEZEJknhasoHgm5CyTuCGEm7qxgWWBKA9j
 yeCfcpToXrY4cIMgsPR4tpZ9jn4fLsHFBEvCVMEoOp/K2ZI27lfJ0/OeRlgKdg11
 dTmM+J96vw7ltLHeN+yRWY1XgaGsBreqNJSO2mCGrAbbTJXSTrNZxP4wonTvKkFI
 GyTIgRaQA9ggk7/IhalusEEGIF0aaaX/z7uBXqEGkCyOTacLG5rxYNGCoaPdv1Bl
 fT7spZy1bAx3ABq/yJeF38Wi5jCXf55Z3cwYK0+tpJVUlAncYpJJBiyTERtR24OK
 NeDTWkw4e071xPDfmUFB96eINDQ8KXBRRcK2n2b6nW43loYtqgafrx4prL8W2T/u
 mB1WquNwjqdNN43iKAcyArrooOG18sJzRE3uAM6W4fjPx8DAHtYdaO3du3Mb5Kzz
 YaqgVO88NDsYaQRJCnmdQ7KDFToMy5A6btj2LhnYQ/3CMhktkg2RHC0aERGgNJLs
 ifVj3kvc+l8UwomvNOMjNket+AH7hbp64lbAfjAwzcgOGROKNyOslsr33qibg4lQ
 SQKl15wFDHLAcP2tj9QoUFO+97FqDXWBIzoEhDDBqfpVNRx25R7NePUkkA+0dHTS
 VedeNG6p2yFeW2UTAD4nYP9xWA==
 =s7xn
 -----END PGP SIGNATURE-----

Merge tag 'u-boot-stm32-20220510' of https://source.denx.de/u-boot/custodians/u-boot-stm

Add new STM32 MCU boards and Documentation
STM32 programmer improvements
video: support several LTDC HW versions and fix data enable polarity
board: fix stboard error message, consider USB cable connected when boot device is USB
configs: stm32mp1: set console variable for extlinux.conf
configs: stm32mp1: add support for baudrate higher than 115200 for ST-Link
ARM: stm32mp: Fix Silicon version handling and ft_system_setup()
phy: stm32-usbphyc: Add DT phy tuning support
arm: dts: stm32mp15: alignment with v5.18
ram: Conditionally enable ASR
mach-stm32mp: psci: retain MCUDIVR, PLL3CR, PLL4CR, MSSCKSELR across suspend
configs: Use TFTP_TSIZE on DHSOM and STMicroelectronics boards
ARM: stm32: Use default CONFIG_TFTP_BLOCKSIZE on DHSOM
pinctrl: stm32: rework GPIO holes management
2022-05-10 15:28:02 -04:00
..
android Create a new boot/ directory 2021-11-11 19:01:56 -05:00
api clk: Add driver API to HTML docs 2022-02-25 01:41:04 -05:00
arch sandbox: Add a build for VPL 2022-05-02 09:58:13 -04:00
board doc: Add documentation for STM32 MCUs 2022-05-10 13:56:12 +02:00
build doc: add libgnutls28-dev to build dependencies 2022-03-12 12:27:07 +01:00
chromium doc: Update documentation for cros-2021.04 release 2021-07-15 19:50:28 +08:00
develop Introduce Verifying Program Loader (VPL) 2022-05-02 09:58:13 -04:00
device-tree-bindings doc: Add device-tree-bindings for atsha204 and atsha204a 2022-05-10 06:47:38 +02:00
imx arm: Remove zmx25 board and ARCH_MX25 2021-10-01 21:08:18 -04:00
media doc: Remove duplicated documentation directory 2019-06-20 10:57:08 -04:00
mvebu WS cleanup: remove trailing empty lines 2021-09-30 08:08:56 -04:00
sphinx doc: update doc/sphinx/requirements.txt 2022-03-25 08:59:49 -04:00
sphinx-static doc: Remove duplicated documentation directory 2019-06-20 10:57:08 -04:00
SPI sandbox: update documents regarding spi_sf 2020-05-29 20:55:45 -06:00
SPL net: Rename SPL_NET_SUPPORT to SPL_NET 2021-09-04 12:48:53 -04:00
uImage.FIT mkimage: use environment variable MKIMAGE_SIGN_PIN to set pin for OpenSSL Engine 2021-07-28 20:46:34 -04:00
usage doc: fix typos in bootmenu.rst 2022-05-03 21:39:22 +02:00
.gitignore doc: Add .gitignore for the Sphinx build output directory 2019-07-24 14:15:37 -04:00
bounces patman: add support for omitting bouncing addresses 2017-09-11 21:43:58 -06:00
conf.py doc: fix Latex margins 2021-08-14 20:54:41 +02:00
feature-removal-schedule.txt treewide: mem: Move mtest related defines to Kconfig 2020-05-08 12:02:56 -04:00
git-mailrc nds32: Remove the architecture 2022-04-25 16:04:05 -04:00
I2C_Edge_Conditions rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
index.rst doc: move i.MX7D/i.MX8MM A/B booting to board specific 2021-08-17 17:24:07 +02:00
kwboot.1 tools: kwboot: Fix spelling of "followed" in kwboot.1 2022-04-23 22:05:33 +02:00
Makefile doc: handle 'make htmldocs' warnings as errors 2021-08-01 22:23:01 +02:00
mkeficapsule.1 mkeficapsule: Remove raw and FIT GUID types 2022-04-15 10:43:18 +02:00
mkimage.1 mkimage: Document misc options 2022-05-07 23:17:25 +02:00
README.arm-caches doc: ARM: Use the right function name 2015-01-14 11:37:39 -05:00
README.arm-relocation treewide: convert bd_t to struct bd_info manually 2020-07-17 10:46:44 -04:00
README.armada-secureboot arm: mvebu: Implement secure boot 2017-02-01 09:04:18 +01:00
README.asn1 doc: add README for asn1 compiler and decoder 2019-12-06 16:44:20 -05:00
README.atmel_mci treewide: convert bd_t to struct bd_info manually 2020-07-17 10:46:44 -04:00
README.atmel_pmecc ARM: at91: Convert SPL_GENERATE_ATMEL_PMECC_HEADER to Kconfig 2019-01-21 08:36:11 -05:00
README.autoboot autoboot: Rename CONFIG_MENUKEY to CONFIG_AUTOBOOT_MENUKEY 2019-08-02 11:19:14 -04:00
README.bcm7xxx board: arm: Add support for Broadcom BCM7445 2018-07-10 16:55:57 -04:00
README.bcmns3 doc: add README doc for bcmns3 platform 2020-07-29 10:37:11 -04:00
README.bitbangMII Coding Style cleanup; update CHANGELOG, prepare -rc1 2009-10-28 00:49:47 +01:00
README.bootcount bootcount: clarify documentation 2022-03-23 07:27:38 +01:00
README.boston boston: Introduce support for the MIPS Boston development board 2016-09-21 16:24:36 +02:00
README.bus_vcxk SPDX: Convert all of our single license tags to Linux Kernel style 2018-05-07 09:34:12 -04:00
README.cfi doc/README.cfi: Update code snippet, and add example. 2017-01-02 11:14:01 -05:00
README.commands.itest
README.commands.spl WS cleanup: remove SPACE(s) followed by TAB 2021-09-30 09:08:16 -04:00
README.console treewide: convert bd_t to struct bd_info manually 2020-07-17 10:46:44 -04:00
README.davinci README: davinci: Clarify when SPL is used and the target devices. 2020-07-13 20:58:34 +05:30
README.davinci.nand_spl arm, davinci: add cam_enc_4xx support 2011-11-03 22:56:25 +01:00
README.dfutftp WS cleanup: remove excessive empty lines 2021-09-30 08:08:56 -04:00
README.displaying-bmps lcd: implement a callback for splashimage 2013-03-11 11:06:09 -04:00
README.dns Coding Style cleanup; update CHANGELOG. 2009-07-23 22:23:23 +02:00
README.enetaddr net: Always build the string_to_enetaddr() helper 2019-12-09 09:47:41 -06:00
README.esbc_validate SPDX: Convert all of our single license tags to Linux Kernel style 2018-05-07 09:34:12 -04:00
README.ext4 fs: Migrate ext4 to Kconfig 2018-01-22 16:43:30 -05:00
README.falcon WS cleanup: remove SPACE(s) followed by TAB 2021-09-30 09:08:16 -04:00
README.fec_mxc net: fec_mxc: Drop CONFIG_FEC_XCV_TYPE 2022-03-18 12:48:17 -04:00
README.fsl-ddr driver/ddr/fsl: Add address parity support for DDR4 UDIMM/discrete 2016-03-21 12:42:13 -07:00
README.fsl-dpaa armv8/ls1043a: Add Fman support 2015-10-29 10:34:01 -07:00
README.fsl-esdhc Move eSDHC adapter card identification to board files 2020-07-27 14:16:28 +05:30
README.fsl-hwconfig powerpc/85xx: Specify hwconfig usage for USB controller 2011-07-11 13:24:20 -05:00
README.fsl-trustzone-components armv8: LS2080A: Rename LS2085A to reflect LS2080A 2015-11-30 08:53:04 -08:00
README.fsl_iim Add fsl_iim driver 2013-04-28 11:07:41 +02:00
README.fuse Add fuse API and commands 2013-04-28 11:07:40 +02:00
README.generic-board treewide: convert bd_t to struct bd_info manually 2020-07-17 10:46:44 -04:00
README.generic_usb_ohci doc: Fix outdated ohci board hook documentation 2019-04-02 12:52:54 +02:00
README.gpio dt-bindings: gpio: alignment with kernel v5.3 2020-04-16 23:06:54 -04:00
README.gpt cmd: gpt: Add option to write GPT partitions to environment variable 2021-05-04 12:52:46 -04:00
README.Heterogeneous-SoCs powerpc/mpc85xx: Add DSP side awareness for Freescale Heterogeneous SoCs 2015-03-04 10:15:29 -08:00
README.hwconfig Cosmetic: Fix a number of typos, no functional changes. 2013-09-20 10:30:54 -04:00
README.i2c i2c: Add a mux for GPIO-based I2C bus arbitration 2015-08-05 21:06:10 -06:00
README.iomux SPDX: Convert all of our single license tags to Linux Kernel style 2018-05-07 09:34:12 -04:00
README.JFFS2 fs: Kconfig: Add a separate option for FS_JFFS2 2017-05-22 12:45:31 -04:00
README.JFFS2_NAND README: Drop unused JFFS2 options 2016-10-06 20:40:26 -04:00
README.kconfig Revert "global: Remove CONFIG_SYS_EXTRA_OPTIONS support" 2022-04-02 18:18:57 -04:00
README.kwbimage doc: fix documentation of out-of-tree build 2014-11-07 16:27:07 -05:00
README.LED powerpc, 8xx: remove support for 8xx 2017-06-12 08:37:55 -04:00
README.link-local net: cosmetic: Fix checkpatch.pl failures in net.c 2015-04-18 11:11:35 -06:00
README.malta Use correct spelling of "U-Boot" 2016-02-06 12:00:59 +01:00
README.marvell Revert "arm64: dts: a3720: add support for espressobin with populated emmc" 2020-12-07 07:11:37 +01:00
README.mediatek doc: README.mediatek: Add a simple README for MediaTek 2018-11-28 23:04:54 -05:00
README.memory-test Feature Removal: disable "mtest" command by default 2013-03-11 15:26:59 -04:00
README.mpc83xx.ddrecc
README.mpc83xxads README: Drop CONFIG_MPC8349ADS 2016-10-06 20:40:51 -04:00
README.mpc85xx powerpc: mpc85xx: Rename _start_e500 symbol to _start 2022-04-26 17:18:39 +05:30
README.mpc85xx-sd-spi-boot Fix URLs to old freescale git repos 2022-03-28 08:22:17 -04:00
README.mpc85xx-spin-table Use correct spelling of "U-Boot" 2016-02-06 12:00:59 +01:00
README.mpc85xxcds Use correct spelling of "U-Boot" 2016-02-06 12:00:59 +01:00
README.multi-dtb-fit doc: multi-dtb-fit: Remove double underscores 2020-07-17 10:47:19 -04:00
README.mxc_ocotp arm: vf610: Add Vybrid VF610 to mxc_ocotp document 2013-06-03 10:56:54 +02:00
README.nand Convert CONFIG_NAND_OMAP_ECCSCHEME to Kconfig 2021-10-06 09:16:24 -04:00
README.odroid WS cleanup: remove SPACE(s) followed by TAB 2021-09-30 09:08:16 -04:00
README.OFT
README.omap-ulpi-viewport usb: ulpi: Add omap-ulpi-view port support 2012-02-12 10:11:30 +01:00
README.omap3 logicpd: Drop omap3 zoom1 2020-07-09 20:58:05 +05:30
README.pblimage powerpc/tool/pbl: fix pbl image compiling process 2013-10-16 16:13:13 -07:00
README.pcap WS cleanup: remove trailing empty lines 2021-09-30 08:08:56 -04:00
README.POST treewide: convert bd_t to struct bd_info manually 2020-07-17 10:46:44 -04:00
README.power-framework doc:power:pmic: Add doc entry for PMIC(v2) framework 2014-04-18 10:42:30 -04:00
README.pxe cmd: pxe_utils: sysboot: add kaslr-seed generation support 2022-02-11 09:00:47 -05:00
README.ramboot-ppc85xx powerpc: mpc85xx: Convert CONFIG_SYS_CCSRBAR_DEFAULT to Kconfig option 2016-12-02 08:52:34 -08:00
README.rmobile ARM: rmobile: Add R8A77965 M3NULCB support 2019-04-09 18:19:10 +02:00
README.rockchip doc: rockchip: puma: update build and flash instructions 2021-12-24 14:53:31 +08:00
README.rockusb usb: rockchip: implement K_FW_LBA_ERASE_10 command 2018-08-08 22:22:07 +02:00
README.s5p4418 arm: add (default) config for nanopi2 board 2020-07-29 08:43:40 -04:00
README.s5pc1xx s5pc1xx: update the README file 2010-04-03 15:24:26 -05:00
README.sata Use correct spelling of "U-Boot" 2016-02-06 12:00:59 +01:00
README.sched
README.scrapyard scrapyard: Delete this file and script 2019-09-19 12:54:29 -04:00
README.serial_multi powerpc, 5xxx, 512x: remove support for mpc5xxx and mpc512x 2017-06-16 10:14:55 -04:00
README.sha1 Drop references to MAKEALL in the documentation 2016-07-31 19:37:08 -06:00
README.silent Convert CONFIG_SYS_DEVICE_NULLDEV to Kconfig 2020-08-23 13:43:10 -04:00
README.SNTP doc: Fix some typos in different files 2012-03-27 13:31:37 +02:00
README.socfpga arm: socfpga: arria10: Add qts-filter for Arria10 socfpga 2020-10-09 17:53:14 +08:00
README.splashprepare splash: Use splashfile instead of location->name 2019-05-20 11:55:42 +02:00
README.srio-pcie-boot-corenet powerpc/doc: Update the README.srio-pcie-boot-corenet 2013-06-20 17:08:47 -05:00
README.standalone nds32: Remove the architecture 2022-04-25 16:04:05 -04:00
README.t1040-l2switch drivers: net: vsc9953: Add LAG support 2016-01-28 12:22:19 -06:00
README.tee Documentation: tee uclass and op-tee driver 2018-10-07 10:47:38 -04:00
README.ti-secure doc: Update info on using K3 secure devices 2019-04-26 17:51:51 -04:00
README.TPL cosmetic: Fix spelling and whitespace errors 2019-12-03 08:43:23 -05:00
README.ubi ubi: Add "skipcheck" command to set/clear this bit in the UBI volume hdr 2019-10-16 05:42:36 +02:00
README.ubispl spl: Lightweight UBI and UBI fastmap support 2016-07-22 09:53:00 -04:00
README.ublimage Minor coding style cleanup. 2011-09-11 21:24:09 +02:00
README.udp net: add a generic udp protocol 2020-09-30 16:55:03 -04:00
README.unaligned-memory-access.txt doc: Fix comparison operator 2014-10-27 11:04:00 -04:00
README.uniphier ARM: uniphier: enable distro boot 2018-07-25 08:47:53 +09:00
README.update cmd: drop fitupd command 2020-07-16 12:37:01 +02:00
README.usb usb: doc: Fix spelling issues in README.usb 2021-11-15 14:33:33 -05:00
README.vf610 arm: vf610: Add Vybrid VF610 CPU support 2013-06-03 10:56:53 +02:00
README.video video: Add information about using TrueType fonts 2018-12-28 12:26:58 +01:00
README.VLAN
README.VSC3316-3308 board/freescale/common: VSC3316/VSC3308 initialization code 2012-10-22 14:31:21 -05:00
README.watchdog nds32: Remove the architecture 2022-04-25 16:04:05 -04:00
README.zfs Coding Style cleanup: replace leading SPACEs by TABs 2013-10-14 16:06:54 -04:00

This patch series adds support for ZFS listing and load to u-boot.

To Enable zfs ls and load commands, modify the board specific config file with
#define CONFIG_CMD_ZFS

Steps to test:

1. After applying the patch, zfs specific commands can be seen
   in the boot loader prompt using
	UBOOT #help

	zfsload- load binary file from a ZFS file system
	zfsls  - list files in a directory (default /)

2. To list the files in zfs pool, device or partition, execute
	zfsls <interface> <dev[:part]> [POOL/@/dir/file]
	For example:
	UBOOT #zfsls mmc 0:5 /rpool/@/usr/bin/

3. To read and load a file from an ZFS formatted partition to RAM, execute
	zfsload <interface> <dev[:part]> [addr] [filename] [bytes]
	For example:
	UBOOT #zfsload mmc 2:2 0x30007fc0 /rpool/@/boot/uImage

References :
	-- ZFS GRUB sources from Solaris GRUB-0.97
	-- GRUB Bazaar repository

Jorgen Lundman <lundman at lundman.net> 2012.