Jean-Jacques Hiblot 7d98dbcc3d usb: musb-new: Add support for DM_USB ... Enable DM for USB peripheral in the musb-new driver. Also make sure that the driver can be used in the SPL. This implies that: * the driver must work with and without the OF_CONTROL option. That in turn, implies that the platform data can be passed in a struct ti_musb_platdata or be read from the dtb * usb.o is linked in the SPL if host support is enabled Another change is that the driver does not fail to bind (and stop the boot process) if one of the child driver does not bind. Reporting the error is enough. This kind of error would appear if the port is configured in the DTS but the driver is not activated in the config. Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>		2018-12-14 17:59:10 +01:00
..
cpu	armv8: lx2160a: Add LX2160A SoC Support	2018-12-06 14:37:19 -08:00
dts	dts: am4372: Enable USB1 in SPL	2018-12-14 17:59:10 +01:00
include	usb: musb-new: Add support for DM_USB	2018-12-14 17:59:10 +01:00
lib	arm: efi: Generate Microsoft PE format compliant images	2018-12-02 21:59:36 +01:00
mach-aspeed
mach-at91	ARM: at91: lds: add test for SPL binary size and bss size	2018-12-07 08:13:44 -05:00
mach-bcm283x
mach-bcmstb	board: arm: Add support for Broadcom BCM7260	2018-09-10 21:19:31 -04:00
mach-davinci	driver: net: consolidate ti's code in separate folder	2018-11-05 10:41:59 -06:00
mach-exynos	Kconfig: Sort bool, default, select and imply options	2018-07-30 07:18:48 -04:00
mach-highbank
mach-imx	imx: mkimage: add size check to the u-boot.imx make target	2018-11-12 11:08:53 +01:00
mach-integrator
mach-k3	armv7r: K3: Allow SPL to run only on core 0	2018-11-26 22:52:11 -05:00
mach-keystone	ti: remove usage of DM_I2C_COMPAT and don't disable DM_I2C in SPL	2018-12-10 07:15:21 +01:00
mach-kirkwood	Convert CONFIG_MII et al to Kconfig	2018-08-17 13:03:54 -04:00
mach-mediatek	arm: MediaTek: add basic support for MT7623 boards	2018-11-28 23:04:50 -05:00
mach-meson	ARM: meson: Add boot device discovery	2018-11-26 14:40:52 +01:00
mach-mvebu	ARM: mvebu: add revision id for Armada-385 B0	2018-11-30 10:58:10 +01:00
mach-omap2	arm: am335x-pdu001: Move from embedded to separate DTB	2018-12-12 12:14:23 -05:00
mach-orion5x	arm: remove prototype for get_timer_masked	2018-10-10 13:35:09 -04:00
mach-owl	board: Add uCRobotics Bubblegum-96 board support	2018-07-09 15:25:23 -04:00
mach-qemu	Kconfig: Sort bool, default, select and imply options	2018-07-30 07:18:48 -04:00
mach-rmobile	ARM: rmobile: Fix to enable icache early in Gen3	2018-12-07 16:31:15 +01:00
mach-rockchip	rockchip: rk3399: Add common Rock960 family from Vamrs	2018-12-06 16:04:49 +01:00
mach-s5pc1xx
mach-snapdragon	db410c: serial# env using msm board serial	2018-09-30 13:00:35 -04:00
mach-socfpga	arm: socfpga: fix SPL booting from fpga OnChip RAM	2018-11-29 12:45:15 +01:00
mach-sti
mach-stm32	mach-stm32: Set MPU SDRAM size to 512MB for STM32F7/H7	2018-10-06 14:09:41 -04:00
mach-stm32mp	gpio: stm32f7: Move STM32_GPIOS_PER_BANK into gpio.h	2018-12-07 08:13:47 -05:00
mach-sunxi	sunxi: pmic_bus: Decrease boot time by not writing duplicate data	2018-12-07 22:24:33 +05:30
mach-tegra	linux/sizes.h: sync from kernel	2018-11-20 13:08:15 +01:00
mach-uniphier	mtd: move NAND files into a raw/ subdirectory	2018-09-20 20:10:49 +05:30
mach-versal	arm64: versal: Add Xilinx Versal Virtual QEMU board	2018-10-16 16:53:24 +02:00
mach-versatile
mach-zynq	Kconfig: Move config SYS_MALLOC_LEN to Kconfig for zynq	2018-08-06 08:44:35 +02:00
mach-zynqmp-r5	arm: zynqmp: Add ZynqMP minimal R5 support	2018-05-11 09:38:23 +02:00
thumb1/include/asm/proc-armv
config.mk	efi_loader: Rename sections to allow for implicit data	2018-07-25 14:57:44 +02:00
Kconfig	Merge branch 'master' of git://git.denx.de/u-boot-socfpga	2018-12-10 07:15:41 -05:00
Kconfig.debug
Makefile	arm: MediaTek: add basic support for MT7629 boards	2018-11-28 23:04:50 -05:00