..
A3000.h
* Patches by Yuli Barcohen, 13 Jul 2003:
2003-07-14 22:13:32 +00:00
ADCIOP.h
Cleanup (PPC4xx is AMCC now)
2005-09-23 11:05:55 +02:00
Adder.h
Add support for Adder boards with 16MB SDRAM;
2006-03-12 01:43:03 +01:00
AdderUSB.h
Code cleanup
2006-06-14 18:14:56 +02:00
ADNPESC1.h
Add common (with Linux) MTD partition scheme and "mtdparts" command
2005-08-08 01:03:24 +02:00
ADNPESC1_base_32.h
* Patch by Stephan Linz, 09 Mar 2004
2004-03-14 15:20:55 +00:00
ADS860.h
Patch by Yuli Barcohen, 19 Apr 2004:
2004-06-06 21:35:06 +00:00
adsvix.h
Patch by Steven Scholz, 06 Apr 2005:
2005-04-06 13:52:31 +00:00
aev.h
* Cleanup TQM5200 board configurations:
2006-07-21 11:16:34 +02:00
Alaska8220.h
Add support for multiple PHYs.
2005-10-28 22:30:33 +02:00
AmigaOneG3SE.h
* The PS/2 mux on the BMS2003 board needs 450 ms after power on
2004-01-20 23:12:12 +00:00
AMX860.h
Change all '$(...)' variable references into '${...}'
2005-11-20 21:40:11 +01:00
AP1000.h
Support passing of OF flat trees to the kernel.
2005-10-13 01:45:54 +02:00
APC405.h
Change all '$(...)' variable references into '${...}'
2005-11-20 21:40:11 +01:00
AR405.h
Cleanup (PPC4xx is AMCC now)
2005-09-23 11:05:55 +02:00
armadillo.h
Add board support for armadillo HT1070
2005-09-26 01:06:33 +02:00
ASH405.h
Re-factoring the legacy NAND code (legacy NAND now only in board-specific
2006-03-05 18:57:33 +01:00
assabet.h
Patch by Steven Scholz, 4 Apr 2005:
2005-04-04 12:44:11 +00:00
at91rm9200dk.h
Add support for multiple PHYs.
2005-10-28 22:30:33 +02:00
atc.h
Change all '$(...)' variable references into '${...}'
2005-11-20 21:40:11 +01:00
B2.h
Patch by Steven Scholz, 4 Apr 2005:
2005-04-04 12:44:11 +00:00
BAB7xx.h
Change all '$(...)' variable references into '${...}'
2005-11-20 21:40:11 +01:00
bamboo.h
AMCC bamboo (440EP) U-Boot image reduced to 384kbyte
2006-07-27 16:14:05 +02:00
barco.h
Support passing of OF flat trees to the kernel.
2005-10-13 01:45:54 +02:00
BC3450.h
Coding Style cleanup
2006-05-03 01:24:04 +02:00
BMW.h
Re-factoring the legacy NAND code (legacy NAND now only in board-specific
2006-03-05 18:57:33 +01:00
bubinga.h
Change all '$(...)' variable references into '${...}'
2005-11-20 21:40:11 +01:00
c2mon.h
Change all '$(...)' variable references into '${...}'
2005-11-20 21:40:11 +01:00
CANBT.h
Cleanup (PPC4xx is AMCC now)
2005-09-23 11:05:55 +02:00
canmb.h
Change all '$(...)' variable references into '${...}'
2005-11-20 21:40:11 +01:00
CATcenter.h
Fix JFFS2 support for legacy NAND driver.
2006-04-08 19:08:06 +02:00
CCM.h
Change all '$(...)' variable references into '${...}'
2005-11-20 21:40:11 +01:00
cerf250.h
Patch by Steven Scholz, 4 Apr 2005:
2005-04-04 12:44:11 +00:00
cm41xx.h
* Extend burst mode RAM test program to take a loop count
2005-05-23 10:49:50 +00:00
cm4008.h
* Extend burst mode RAM test program to take a loop count
2005-05-23 10:49:50 +00:00
cmc_pu2.h
Update configuration for CMC-PU2 board
2006-06-16 16:43:33 +02:00
cmi_mpc5xx.h
* Code cleanup:
2003-06-27 21:31:46 +00:00
CMS700.h
Re-factoring the legacy NAND code (legacy NAND now only in board-specific
2006-03-05 18:57:33 +01:00
cobra5272.h
Patch by Florian Schlote, 08 Sep 2004:
2005-01-09 18:21:42 +00:00
cogent_common.h
* Patch by Shlomo Kut, 29 Mar 2004:
2004-09-29 11:02:56 +00:00
cogent_mpc8xx.h
* The PS/2 mux on the BMS2003 board needs 450 ms after power on
2004-01-20 23:12:12 +00:00
cogent_mpc8260.h
* Patch by Jon Loeliger, Kumar Gala 2005-02-08
2005-07-23 10:37:35 -05:00
CPC45.h
Fix problems with SNTP support;
2005-04-02 22:37:54 +00:00
CPCI2DP.h
PMC405 and CPCI405: Moved configuration of pci resources into config file.
2006-01-18 20:03:15 +01:00
CPCI405.h
Re-factoring the legacy NAND code (legacy NAND now only in board-specific
2006-03-05 18:57:33 +01:00
CPCI405AB.h
Re-factoring the legacy NAND code (legacy NAND now only in board-specific
2006-03-05 18:57:33 +01:00
CPCI405DT.h
Re-factoring the legacy NAND code (legacy NAND now only in board-specific
2006-03-05 18:57:33 +01:00
CPCI440.h
Cleanup (PPC4xx is AMCC now)
2005-09-23 11:05:55 +02:00
CPCI750.h
Minor code cleanup
2006-03-06 13:03:37 +01:00
CPCI4052.h
Re-factoring the legacy NAND code (legacy NAND now only in board-specific
2006-03-05 18:57:33 +01:00
cpci5200.h
Change all '$(...)' variable references into '${...}'
2005-11-20 21:40:11 +01:00
CPCIISER4.h
Cleanup (PPC4xx is AMCC now)
2005-09-23 11:05:55 +02:00
CPU86.h
Fix JFFS2 support for legacy NAND driver.
2006-04-08 19:08:06 +02:00
CPU87.h
Add support for 256 MB SDRAM on CPU87
2006-07-22 21:45:49 +02:00
cradle.h
Patch by Steven Scholz, 4 Apr 2005:
2005-04-04 12:44:11 +00:00
CRAYL1.h
* The PS/2 mux on the BMS2003 board needs 450 ms after power on
2004-01-20 23:12:12 +00:00
csb226.h
Patch by Steven Scholz, 4 Apr 2005:
2005-04-04 12:44:11 +00:00
csb272.h
Change all '$(...)' variable references into '${...}'
2005-11-20 21:40:11 +01:00
csb472.h
Change all '$(...)' variable references into '${...}'
2005-11-20 21:40:11 +01:00
csb637.h
Fix the machine-id of the Cogent csb637 board
2005-10-06 01:26:16 +02:00
CU824.h
Fix problems with SNTP support;
2005-04-02 22:37:54 +00:00
DASA_SIM.h
Cleanup (PPC4xx is AMCC now)
2005-09-23 11:05:55 +02:00
DB64360.h
Change all '$(...)' variable references into '${...}'
2005-11-20 21:40:11 +01:00
DB64460.h
Change all '$(...)' variable references into '${...}'
2005-11-20 21:40:11 +01:00
dbau1x00.h
* Fix dbau1x00 Board
2006-04-11 14:53:29 +02:00
debris.h
Change all '$(...)' variable references into '${...}'
2005-11-20 21:40:11 +01:00
delta.h
Modified the mpc5xxx and the ppc4xx cpu to use the generic OHCI driver
2006-11-27 11:43:09 +01:00
DK1C20.h
Add common (with Linux) MTD partition scheme and "mtdparts" command
2005-08-08 01:03:24 +02:00
DK1C20_safe_32.h
Patches by Stephan Linz, 30 Jan 2004:
2004-02-09 23:12:24 +00:00
DK1C20_standard_32.h
Patches by Stephan Linz, 30 Jan 2004:
2004-02-09 23:12:24 +00:00
DK1S10.h
Add common (with Linux) MTD partition scheme and "mtdparts" command
2005-08-08 01:03:24 +02:00
DK1S10_mtx_ldk_20.h
Patches by Stephan Linz, 30 Jan 2004:
2004-02-09 23:12:24 +00:00
DK1S10_safe_32.h
Patches by Stephan Linz, 30 Jan 2004:
2004-02-09 23:12:24 +00:00
DK1S10_standard_32.h
Patches by Stephan Linz, 30 Jan 2004:
2004-02-09 23:12:24 +00:00
dnp1110.h
Patch by Steven Scholz, 4 Apr 2005:
2005-04-04 12:44:11 +00:00
DP405.h
Cleanup (PPC4xx is AMCC now)
2005-09-23 11:05:55 +02:00
DU405.h
Cleanup (PPC4xx is AMCC now)
2005-09-23 11:05:55 +02:00
EB+MCF-EV123.h
Minor code cleanup.
2006-06-10 22:00:40 +02:00
ebony.h
Change all '$(...)' variable references into '${...}'
2005-11-20 21:40:11 +01:00
ELPPC.h
Change all '$(...)' variable references into '${...}'
2005-11-20 21:40:11 +01:00
ELPT860.h
Change all '$(...)' variable references into '${...}'
2005-11-20 21:40:11 +01:00
EP1C20.h
Nios II - Add Altera EP1C20, EP1S10 and EP1S40 boards
2006-06-08 13:37:39 -04:00
EP1S10.h
Nios II - Add Altera EP1C20, EP1S10 and EP1S40 boards
2006-06-08 13:37:39 -04:00
EP1S40.h
Nios II - Add Altera EP1C20, EP1S10 and EP1S40 boards
2006-06-08 13:37:39 -04:00
EP88x.h
Add support for EmbeddedPlanet EP88x boards
2006-03-12 23:17:31 +01:00
ep7312.h
Add common (with Linux) MTD partition scheme and "mtdparts" command
2005-08-08 01:03:24 +02:00
ep8248.h
Add support for ep8248 board
2005-08-06 01:42:58 +02:00
ep8260.h
Update ep8260: Fix flash timeouts; improve clock resolution for faster UARTs
2005-09-25 16:56:15 +02:00
ERIC.h
Cleanup (PPC4xx is AMCC now)
2005-09-23 11:05:55 +02:00
ESTEEM192E.h
* Code cleanup:
2003-06-27 21:31:46 +00:00
ETX094.h
Change all '$(...)' variable references into '${...}'
2005-11-20 21:40:11 +01:00
evb4510.h
Patch by Steven Scholz, 4 Apr 2005:
2005-04-04 12:44:11 +00:00
EVB64260.h
Add common (with Linux) MTD partition scheme and "mtdparts" command
2005-08-08 01:03:24 +02:00
eXalion.h
* Patch by Pierre Aubert, 26 Feb 2004
2004-02-27 08:20:54 +00:00
EXBITGEN.h
* The PS/2 mux on the BMS2003 board needs 450 ms after power on
2004-01-20 23:12:12 +00:00
ezkit533.h
Coding Style cleanup
2006-03-12 02:55:22 +01:00
FADS823.h
Change all '$(...)' variable references into '${...}'
2005-11-20 21:40:11 +01:00
FADS850SAR.h
* Patch by Robert Schwebel, 10 Jun 2004:
2004-06-10 21:34:36 +00:00
FADS860T.h
Patch by Yuli Barcohen, 19 Apr 2004:
2004-06-06 21:35:06 +00:00
FLAGADM.h
Initial revision
2002-08-19 11:57:05 +00:00
FPS850L.h
* Fix flash parameters passed to Linux for PPChameleon board
2004-06-17 18:50:45 +00:00
FPS860L.h
Fix problems with SNTP support;
2005-04-02 22:37:54 +00:00
G2000.h
Change all '$(...)' variable references into '${...}'
2005-11-20 21:40:11 +01:00
gcplus.h
Patch by Steven Scholz, 4 Apr 2005:
2005-04-04 12:44:11 +00:00
GEN860T.h
Re-factoring the legacy NAND code (legacy NAND now only in board-specific
2006-03-05 18:57:33 +01:00
GENIETV.h
Change all '$(...)' variable references into '${...}'
2005-11-20 21:40:11 +01:00
GTH.h
Initial revision
2002-08-19 11:57:05 +00:00
gth2.h
Add support for TB5200 board
2006-07-19 13:50:38 +02:00
gw8260.h
Adjust "echo" as a default command
2006-03-12 16:51:59 +01:00
h2_p2_dbg_board.h
* Code cleanup (ARM mostly)
2004-07-01 16:30:44 +00:00
hermes.h
Change all '$(...)' variable references into '${...}'
2005-11-20 21:40:11 +01:00
HH405.h
Merge the new NAND code (testing-NAND brach); see doc/README.nand
2006-03-06 11:25:22 +01:00
HIDDEN_DRAGON.h
* Patch by Yusdi Santoso, 22 Oct 2004:
2005-04-03 15:51:42 +00:00
HMI10.h
Change all '$(...)' variable references into '${...}'
2005-11-20 21:40:11 +01:00
hmi1001.h
Change all '$(...)' variable references into '${...}'
2005-11-20 21:40:11 +01:00
HUB405.h
Re-factoring the legacy NAND code (legacy NAND now only in board-specific
2006-03-05 18:57:33 +01:00
hymod.h
* Fix PHY address argument passing with mii info command
2005-09-24 21:54:50 +02:00
IAD210.h
Change all '$(...)' variable references into '${...}'
2005-11-20 21:40:11 +01:00
IceCube.h
Set SDelay register in the DDR controller for the MPC5200B chip.
2006-03-29 13:17:09 +02:00
ICU862.h
Change all '$(...)' variable references into '${...}'
2005-11-20 21:40:11 +01:00
IDS8247.h
Fix JFFS2 support for legacy NAND driver.
2006-04-08 19:08:06 +02:00
impa7.h
Add common (with Linux) MTD partition scheme and "mtdparts" command
2005-08-08 01:03:24 +02:00
incaip.h
Change all '$(...)' variable references into '${...}'
2005-11-20 21:40:11 +01:00
inka4x0.h
Update default environment for INKA4x00 board.
2006-02-07 15:18:25 +01:00
innokom.h
Add common (with Linux) MTD partition scheme and "mtdparts" command
2005-08-08 01:03:24 +02:00
integratorap.h
Update ARM Integrator boards:
2005-10-04 23:10:28 +02:00
integratorcp.h
Update ARM Integrator boards:
2005-10-04 23:10:28 +02:00
IP860.h
Change all '$(...)' variable references into '${...}'
2005-11-20 21:40:11 +01:00
IPHASE4539.h
* Patch by Jon Loeliger, Kumar Gala 2005-02-08
2005-07-23 10:37:35 -05:00
ISPAN.h
Adjust "echo" as a default command
2006-03-12 16:51:59 +01:00
IVML24.h
* Patch by Martin Krause, 17 Jul 2003:
2003-07-17 23:16:40 +00:00
IVMS8.h
* Patch by Martin Krause, 17 Jul 2003:
2003-07-17 23:16:40 +00:00
ixdp425.h
* Update Intel IXP4xx support
2006-05-30 15:56:48 +02:00
ixdpg425.h
* Update Intel IXP4xx support
2006-05-30 15:56:48 +02:00
JSE.h
Fix device partition intialization for SystemACE disks.
2005-10-05 00:25:17 +02:00
KAREF.h
Cleanup (PPC4xx is AMCC now)
2005-09-23 11:05:55 +02:00
kb9202.h
Complete support for the KwikByte KB920x boards
2005-10-06 01:22:22 +02:00
KUP4K.h
Change all '$(...)' variable references into '${...}'
2005-11-20 21:40:11 +01:00
KUP4X.h
Change all '$(...)' variable references into '${...}'
2005-11-20 21:40:11 +01:00
kvme080.h
Add support for KVME080 board
2006-07-21 11:29:20 +02:00
LANTEC.h
* Fix PHY address argument passing with mii info command
2005-09-24 21:54:50 +02:00
lart.h
Patch by Steven Scholz, 4 Apr 2005:
2005-04-04 12:44:11 +00:00
logodl.h
Patch by Steven Scholz, 4 Apr 2005:
2005-04-04 12:44:11 +00:00
lpd7a400-10.h
* Patch by Paul Ruhland, 10 Jun 2004:
2004-06-10 21:55:33 +00:00
lpd7a400.h
Patch by Steven Scholz, 4 Apr 2005:
2005-04-04 12:44:11 +00:00
lpd7a404-10.h
* Patch by Paul Ruhland, 10 Jun 2004:
2004-06-10 21:55:33 +00:00
lpd7a404.h
Patch by Steven Scholz, 4 Apr 2005:
2005-04-04 12:44:11 +00:00
luan.h
Add support for AMCC 440SP, add support for AMCC Luan 440SP eval board.
2005-11-29 18:18:21 +01:00
lubbock.h
Fixes to the Lubbock (PXA 25x) support:
2005-09-26 00:29:53 +02:00
lwmon.h
* Patch by Detlev Zundel, 30 Jun 2005:
2005-07-04 00:03:16 +00:00
M5271EVB.h
Enable autoboot for M5271EVB board.
2006-05-17 12:16:26 +02:00
M5272C3.h
* Some code cleanup
2004-02-12 00:47:09 +00:00
M5282EVB.h
* Some code cleanup
2004-02-12 00:47:09 +00:00
MBX.h
* Code cleanup:
2003-06-27 21:31:46 +00:00
MBX860T.h
Initial revision
2002-08-19 11:57:05 +00:00
mcc200.h
Cleanup duplicate definitions in MCC200 config file.
2006-07-13 16:29:40 +02:00
METROBOX.h
Cleanup (PPC4xx is AMCC now)
2005-09-23 11:05:55 +02:00
MHPC.h
Change all '$(...)' variable references into '${...}'
2005-11-20 21:40:11 +01:00
MIP405.h
Adjust "echo" as a default command
2006-03-12 16:51:59 +01:00
ML2.h
Cleanup (PPC4xx is AMCC now)
2005-09-23 11:05:55 +02:00
ml300.h
Cleanup (PPC4xx is AMCC now)
2005-09-23 11:05:55 +02:00
modnet50.h
Add common (with Linux) MTD partition scheme and "mtdparts" command
2005-08-08 01:03:24 +02:00
MOUSSE.h
* Code cleanup:
2003-06-27 21:31:46 +00:00
mp2usb.h
Modified the mpc5xxx and the ppc4xx cpu to use the generic OHCI driver
2006-11-27 11:43:09 +01:00
MPC86xADS.h
Switch MPC86xADS and MPC885ADS boards to use cpuclk environment
2006-03-12 01:55:43 +01:00
MPC885ADS.h
Switch MPC86xADS and MPC885ADS boards to use cpuclk environment
2006-03-12 01:55:43 +01:00
MPC8260ADS.h
Add board support for armadillo HT1070
2005-09-26 01:06:33 +02:00
MPC8266ADS.h
Change all '$(...)' variable references into '${...}'
2005-11-20 21:40:11 +01:00
MPC8349EMDS.h
Minor cleanup.
2006-05-10 17:43:20 +02:00
MPC8540ADS.h
* Patch by Jon Loeliger, 2005-05-05
2005-07-25 14:05:07 -05:00
MPC8540EVAL.h
Fix style issues primarily in 85xx and 83xx boards.
2005-08-01 13:20:47 -05:00
MPC8541CDS.h
* Patch by Jon Loeliger, 2005-05-05
2005-07-25 14:05:07 -05:00
MPC8548CDS.h
* Patch by Jon Loeliger, 2005-05-05
2005-07-25 14:05:07 -05:00
MPC8555CDS.h
* Patch by Jon Loeliger, 2005-05-05
2005-07-25 14:05:07 -05:00
MPC8560ADS.h
Add support for multiple PHYs.
2005-10-28 22:30:33 +02:00
MUSENKI.h
* Code cleanup:
2003-06-27 21:31:46 +00:00
MVBLUE.h
Change all '$(...)' variable references into '${...}'
2005-11-20 21:40:11 +01:00
MVS1.h
Change all '$(...)' variable references into '${...}'
2005-11-20 21:40:11 +01:00
mx1ads.h
Patch by Steven Scholz, 4 Apr 2005:
2005-04-04 12:44:11 +00:00
mx1fs2.h
Add common (with Linux) MTD partition scheme and "mtdparts" command
2005-08-08 01:03:24 +02:00
NC650.h
Update for NC650 board. Add NC650 based CP850 configuration.
2006-04-19 11:52:46 +02:00
NETPHONE.h
Re-factoring the legacy NAND code (legacy NAND now only in board-specific
2006-03-05 18:57:33 +01:00
netstar.h
Re-factoring the legacy NAND code (legacy NAND now only in board-specific
2006-03-05 18:57:33 +01:00
NETTA.h
Fix JFFS2 support for legacy NAND driver.
2006-04-08 19:08:06 +02:00
NETTA2.h
Re-factoring the legacy NAND code (legacy NAND now only in board-specific
2006-03-05 18:57:33 +01:00
NETVIA.h
Re-factoring the legacy NAND code (legacy NAND now only in board-specific
2006-03-05 18:57:33 +01:00
ns9750dev.h
Patch by Steven Scholz, 4 Apr 2005:
2005-04-04 12:44:11 +00:00
NSCU.h
Change all '$(...)' variable references into '${...}'
2005-11-20 21:40:11 +01:00
NX823.h
Initial revision
2002-08-20 16:13:03 +00:00
o2dnt.h
Change port configuration for O2DNT (CODEC1 on PSC1)
2005-12-06 20:33:07 +01:00
ocotea.h
Change all '$(...)' variable references into '${...}'
2005-11-20 21:40:11 +01:00
OCRTC.h
Cleanup (PPC4xx is AMCC now)
2005-09-23 11:05:55 +02:00
omap730.h
* Patch by Rishi Bhattacharya, 08 May 2004:
2004-06-08 00:22:43 +00:00
omap730p2.h
Patch by Steven Scholz, 4 Apr 2005:
2005-04-04 12:44:11 +00:00
omap1510.h
Add support for Siemens SX1 mobile phone;
2004-03-12 00:14:09 +00:00
omap1510inn.h
Patch by Steven Scholz, 4 Apr 2005:
2005-04-04 12:44:11 +00:00
omap1610h2.h
Patch by Steven Scholz, 4 Apr 2005:
2005-04-04 12:44:11 +00:00
omap1610inn.h
Patch by Steven Scholz, 4 Apr 2005:
2005-04-04 12:44:11 +00:00
omap2420h4.h
Fix JFFS2 support for legacy NAND driver.
2006-04-08 19:08:06 +02:00
omap5912osk.h
Update omap5912osk board support
2006-05-10 10:55:16 +02:00
ORSG.h
Cleanup (PPC4xx is AMCC now)
2005-09-23 11:05:55 +02:00
OXC.h
* Patch by Mark Jonas: Remove config.tmp files only when
2004-04-08 22:31:29 +00:00
P3G4.h
Change all '$(...)' variable references into '${...}'
2005-11-20 21:40:11 +01:00
p3p440.h
Merge with /home/sr/git/u-boot/cfi-flash
2006-04-06 00:16:58 +02:00
PATI.h
* Patch by Ronen Shitrit, 10 Dec 2003:
2004-01-03 00:43:19 +00:00
pb1x00.h
Change all '$(...)' variable references into '${...}'
2005-11-20 21:40:11 +01:00
PCI405.h
Cleanup (PPC4xx is AMCC now)
2005-09-23 11:05:55 +02:00
PCI5441.h
Patches by Scott McNutt, 24 Aug 2004:
2004-10-10 21:27:30 +00:00
PCIPPC2.h
Re-factoring the legacy NAND code (legacy NAND now only in board-specific
2006-03-05 18:57:33 +01:00
PCIPPC6.h
Re-factoring the legacy NAND code (legacy NAND now only in board-specific
2006-03-05 18:57:33 +01:00
pcs440ep.h
Minor cleanup for PCS440EP board
2006-06-13 18:55:07 +02:00
pcu_e.h
Change all '$(...)' variable references into '${...}'
2005-11-20 21:40:11 +01:00
pdnb3.h
* Update Intel IXP4xx support
2006-05-30 15:56:48 +02:00
pf5200.h
Change all '$(...)' variable references into '${...}'
2005-11-20 21:40:11 +01:00
PIP405.h
Adjust "echo" as a default command
2006-03-12 16:51:59 +01:00
PK1C20.h
Update PK1C20 board
2006-06-08 12:03:21 -04:00
pleb2.h
Patch by Steven Scholz, 4 Apr 2005:
2005-04-04 12:44:11 +00:00
PLU405.h
Re-factoring the legacy NAND code (legacy NAND now only in board-specific
2006-03-05 18:57:33 +01:00
PM520.h
Re-factoring the legacy NAND code (legacy NAND now only in board-specific
2006-03-05 18:57:33 +01:00
PM826.h
Re-factoring the legacy NAND code (legacy NAND now only in board-specific
2006-03-05 18:57:33 +01:00
PM828.h
Re-factoring the legacy NAND code (legacy NAND now only in board-specific
2006-03-05 18:57:33 +01:00
PM854.h
Add support for multiple PHYs.
2005-10-28 22:30:33 +02:00
PM856.h
Fix build problems for PM856 Board
2005-08-08 00:47:14 +02:00
PMC405.h
PMC405 and CPCI405: Moved configuration of pci resources into config file.
2006-01-18 20:03:15 +01:00
PN62.h
Change all '$(...)' variable references into '${...}'
2005-11-20 21:40:11 +01:00
PPChameleonEVB.h
Updates to common PPC4xx onboard (DDR)SDRAM init code (405 and 440)
2006-03-31 14:32:07 +02:00
ppmc7xx.h
Add support for TB5200 board
2006-07-19 13:50:38 +02:00
ppmc8260.h
Adjust "echo" as a default command
2006-03-12 16:51:59 +01:00
purple.h
Change all '$(...)' variable references into '${...}'
2005-11-20 21:40:11 +01:00
pxa255_idp.h
Add Vibren (was Accelent) PXA255 IDP Support
2005-09-25 15:59:01 +02:00
QS823.h
Patch by Wolter Kamphuis, 05 Dec 2003:
2003-12-07 22:27:15 +00:00
QS850.h
Patch by Wolter Kamphuis, 05 Dec 2003:
2003-12-07 22:27:15 +00:00
QS860T.h
Change all '$(...)' variable references into '${...}'
2005-11-20 21:40:11 +01:00
quantum.h
Change all '$(...)' variable references into '${...}'
2005-11-20 21:40:11 +01:00
R360MPI.h
Change all '$(...)' variable references into '${...}'
2005-11-20 21:40:11 +01:00
r5200.h
Minor cleanup.
2006-05-10 17:43:20 +02:00
Rattler.h
Adjust "echo" as a default command
2006-03-12 16:51:59 +01:00
RBC823.h
Fix JFFS2 support for legacy NAND driver.
2006-04-08 19:08:06 +02:00
rmu.h
Change all '$(...)' variable references into '${...}'
2005-11-20 21:40:11 +01:00
RPXClassic.h
Change all '$(...)' variable references into '${...}'
2005-11-20 21:40:11 +01:00
RPXlite.h
RPXlite configuration fixes
2006-03-12 01:48:55 +01:00
RPXlite_DW.h
Add support for Lite5200B board.
2006-03-17 11:42:53 +01:00
RPXsuper.h
Adjust "echo" as a default command
2006-03-12 16:51:59 +01:00
RRvision.h
Change all '$(...)' variable references into '${...}'
2005-11-20 21:40:11 +01:00
rsdproto.h
* Patch by Jon Loeliger, Kumar Gala 2005-02-08
2005-07-23 10:37:35 -05:00
sacsng.h
Adjust "echo" as a default command
2006-03-12 16:51:59 +01:00
Sandpoint8240.h
Change all '$(...)' variable references into '${...}'
2005-11-20 21:40:11 +01:00
Sandpoint8245.h
Fix problems with SNTP support;
2005-04-02 22:37:54 +00:00
sbc405.h
Change all '$(...)' variable references into '${...}'
2005-11-20 21:40:11 +01:00
sbc2410x.h
Code cleanup
2006-07-21 11:56:05 +02:00
sbc8240.h
* Rename SBC8560 into sbc8560 for consistency
2004-07-10 22:35:59 +00:00
sbc8260.h
Adjust "echo" as a default command
2006-03-12 16:51:59 +01:00
SBC8540.h
* Patch by Jon Loeliger, 2005-05-05
2005-07-25 14:05:07 -05:00
sbc8560.h
* Patch by Jon Loeliger, 2005-05-05
2005-07-25 14:05:07 -05:00
SBC8560.h
* Patch by Jon Loeliger, 2005-05-05
2005-07-25 14:05:07 -05:00
sc520_cdp.h
Add common (with Linux) MTD partition scheme and "mtdparts" command
2005-08-08 01:03:24 +02:00
sc520_spunk.h
Add common (with Linux) MTD partition scheme and "mtdparts" command
2005-08-08 01:03:24 +02:00
sc520_spunk_rel.h
* Code cleanup:
2003-06-27 21:31:46 +00:00
scb9328.h
Patch by Steven Scholz, 4 Apr 2005:
2005-04-04 12:44:11 +00:00
SCM.h
Change all '$(...)' variable references into '${...}'
2005-11-20 21:40:11 +01:00
shannon.h
Patch by Steven Scholz, 4 Apr 2005:
2005-04-04 12:44:11 +00:00
SL8245.h
* Add support for USB Mass Storage Devices (BBB)
2003-09-10 18:20:28 +00:00
SM850.h
Change all '$(...)' variable references into '${...}'
2005-11-20 21:40:11 +01:00
smdk2400.h
Patch by Steven Scholz, 4 Apr 2005:
2005-04-04 12:44:11 +00:00
smdk2410.h
Patch by Steven Scholz, 4 Apr 2005:
2005-04-04 12:44:11 +00:00
smmaco4.h
Rename SMMACO4 board into smmaco4 for consistency with Linux.
2006-02-22 10:25:39 +01:00
sorcery.h
Add PCI support for Sorcery board.
2005-05-16 15:23:22 +00:00
spc1920.h
Support for spc1920 board.
2006-07-12 08:48:24 +02:00
SPD823TS.h
* Patch by Martin Krause, 17 Jul 2003:
2003-07-17 23:16:40 +00:00
spieval.h
* Cleanup TQM5200 board configurations:
2006-07-21 11:16:34 +02:00
stamp.h
Coding Style cleanup
2006-03-12 02:55:22 +01:00
stxgp3.h
* Patch by Jon Loeliger, 2005-05-05
2005-07-25 14:05:07 -05:00
stxxtc.h
Fix JFFS2 support for legacy NAND driver.
2006-04-08 19:08:06 +02:00
suzaku.h
Patch by Steven Scholz, 4 Apr 2005:
2005-04-04 12:44:11 +00:00
svm_sc8xx.h
Re-factoring the legacy NAND code (legacy NAND now only in board-specific
2006-03-05 18:57:33 +01:00
SX1.h
Patch by Steven Scholz, 4 Apr 2005:
2005-04-04 12:44:11 +00:00
SXNI855T.h
Re-factoring the legacy NAND code (legacy NAND now only in board-specific
2006-03-05 18:57:33 +01:00
TASREG.h
Code cleanup.
2004-12-16 21:44:03 +00:00
tb0229.h
Change all '$(...)' variable references into '${...}'
2005-11-20 21:40:11 +01:00
TB5200.h
* Cleanup TQM5200 board configurations:
2006-07-21 11:16:34 +02:00
TOP860.h
Change all '$(...)' variable references into '${...}'
2005-11-20 21:40:11 +01:00
TOP5200.h
Change all '$(...)' variable references into '${...}'
2005-11-20 21:40:11 +01:00
Total5200.h
Change all '$(...)' variable references into '${...}'
2005-11-20 21:40:11 +01:00
TQM85xx.h
More code cleanup
2006-07-21 15:24:56 +02:00
TQM823L.h
Change all '$(...)' variable references into '${...}'
2005-11-20 21:40:11 +01:00
TQM823M.h
Change all '$(...)' variable references into '${...}'
2005-11-20 21:40:11 +01:00
TQM834x.h
Enable address translation on MPC83xx
2006-02-10 15:40:06 -06:00
TQM850L.h
Change all '$(...)' variable references into '${...}'
2005-11-20 21:40:11 +01:00
TQM850M.h
Change all '$(...)' variable references into '${...}'
2005-11-20 21:40:11 +01:00
TQM855L.h
Change all '$(...)' variable references into '${...}'
2005-11-20 21:40:11 +01:00
TQM855M.h
Change all '$(...)' variable references into '${...}'
2005-11-20 21:40:11 +01:00
TQM860L.h
Change all '$(...)' variable references into '${...}'
2005-11-20 21:40:11 +01:00
TQM860M.h
Change all '$(...)' variable references into '${...}'
2005-11-20 21:40:11 +01:00
TQM862L.h
Change all '$(...)' variable references into '${...}'
2005-11-20 21:40:11 +01:00
TQM862M.h
Change all '$(...)' variable references into '${...}'
2005-11-20 21:40:11 +01:00
TQM866M.h
Change all '$(...)' variable references into '${...}'
2005-11-20 21:40:11 +01:00
TQM885D.h
Add support for TQM885D board.
2006-07-12 15:26:01 +02:00
TQM5200.h
Modified the mpc5xxx and the ppc4xx cpu to use the generic OHCI driver
2006-11-27 11:43:09 +01:00
TQM8260.h
Change all '$(...)' variable references into '${...}'
2005-11-20 21:40:11 +01:00
trab.h
Modified the mpc5xxx and the ppc4xx cpu to use the generic OHCI driver
2006-11-27 11:43:09 +01:00
uc100.h
Change all '$(...)' variable references into '${...}'
2005-11-20 21:40:11 +01:00
utx8245.h
Adjust "echo" as a default command
2006-03-12 16:51:59 +01:00
v37.h
Change all '$(...)' variable references into '${...}'
2005-11-20 21:40:11 +01:00
VCMA9.h
Fix JFFS2 support for legacy NAND driver.
2006-04-08 19:08:06 +02:00
versatile.h
* Patch by Philippe Robin, 28 Sept 2004:
2004-10-11 22:51:13 +00:00
virtlab2.h
Add support for VirtLab2 board
2006-05-12 16:15:46 +02:00
VOH405.h
Re-factoring the legacy NAND code (legacy NAND now only in board-specific
2006-03-05 18:57:33 +01:00
voiceblue.h
VoiceBlue update: use new MTD flash partitioning methods, use more
2006-05-03 08:34:03 +02:00
VOM405.h
New PPC 405EP board added: CMS700
2005-11-15 10:35:59 +01:00
VoVPN-GW.h
Change all '$(...)' variable references into '${...}'
2005-11-20 21:40:11 +01:00
W7OLMC.h
Cleanup (PPC4xx is AMCC now)
2005-09-23 11:05:55 +02:00
W7OLMG.h
Cleanup (PPC4xx is AMCC now)
2005-09-23 11:05:55 +02:00
walnut.h
Change all '$(...)' variable references into '${...}'
2005-11-20 21:40:11 +01:00
wepep250.h
Patch by Steven Scholz, 4 Apr 2005:
2005-04-04 12:44:11 +00:00
WUH405.h
Re-factoring the legacy NAND code (legacy NAND now only in board-specific
2006-03-05 18:57:33 +01:00
xaeniax.h
Adjust configuration of XENIAX board
2005-08-04 19:45:01 +02:00
xm250.h
Enable initrd ATAG for xm250 board.
2006-07-21 11:36:48 +02:00
XPEDITE1K.h
Cleanup (PPC4xx is AMCC now)
2005-09-23 11:05:55 +02:00
xsengine.h
Add common (with Linux) MTD partition scheme and "mtdparts" command
2005-08-08 01:03:24 +02:00
yellowstone.h
Changed default ramdisk addr in yosemite/yellowstone ports
2006-05-15 15:11:20 +02:00
yosemite.h
Modified the mpc5xxx and the ppc4xx cpu to use the generic OHCI driver
2006-11-27 11:43:09 +01:00
yucca.h
Fix timer problems on AMCC yucca board.
2006-07-06 21:17:24 +02:00
Yukon8220.h
Add support for multiple PHYs.
2005-10-28 22:30:33 +02:00
ZPC1900.h
Memory configuration changes for ZPC.1900 board
2006-03-12 01:45:44 +01:00
ZUMA.h
Add common (with Linux) MTD partition scheme and "mtdparts" command
2005-08-08 01:03:24 +02:00
zylonite.h
NAND support for zylonite board + some minor cleanup.
2006-04-25 16:48:48 +02:00
53e336e9ff