mirror of
https://github.com/AsahiLinux/u-boot
synced 2025-03-03 23:07:12 +00:00
Errata doc: https://www.ti.com/lit/pdf/sprz457 Errata ID i2331 CPSW: Device lockup when reading CPSW registers Details: A device lockup can occur during the second read of any CPSW subsystem register after any MAIN domain power on reset (POR). A MAIN domain POR occurs using the hardware MCU_PORz signal, or via software using CTRLMMR_RST_CTRL.SW_MAIN_POR or CTRLMMR_MCU_RST_CTRL.SW_MAIN_POR. After these resets, the processor and internal bus structures may get into a state which is only recoverable with full device reset using MCU_PORz. Due to this errata, Ethernet boot should not be used on this device. Workaround(s): To avoid the lockup, a warm reset should be issued after a MAIN domain POR and before any access to the CPSW registers. The warm reset realigns internal clocks and prevents the lockup from happening. Workaround above errata by calling do_reset() in case of cold boot in order to trigger warm reset. This needs enabling SYSRESET driver in R5 SPL to enable TI SCI reset driver. Signed-off-by: Nitin Yadav <n-yadav@ti.com> Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com> Reviewed-by: Bryan Brattlof <bb@ti.com> |
||
---|---|---|
.. | ||
cpu | ||
dts | ||
include | ||
lib | ||
mach-apple | ||
mach-aspeed | ||
mach-at91 | ||
mach-bcm283x | ||
mach-bcmbca | ||
mach-bcmstb | ||
mach-cortina | ||
mach-davinci | ||
mach-exynos | ||
mach-highbank | ||
mach-hpe | ||
mach-imx | ||
mach-integrator | ||
mach-ipq40xx | ||
mach-k3 | ||
mach-keystone | ||
mach-kirkwood | ||
mach-lpc32xx | ||
mach-mediatek | ||
mach-meson | ||
mach-mvebu | ||
mach-nexell | ||
mach-npcm | ||
mach-octeontx | ||
mach-octeontx2 | ||
mach-omap2 | ||
mach-orion5x | ||
mach-owl | ||
mach-qemu | ||
mach-rmobile | ||
mach-rockchip | ||
mach-s5pc1xx | ||
mach-snapdragon | ||
mach-socfpga | ||
mach-sti | ||
mach-stm32 | ||
mach-stm32mp | ||
mach-sunxi | ||
mach-tegra | ||
mach-u8500 | ||
mach-uniphier | ||
mach-versal | ||
mach-versal-net | ||
mach-versatile | ||
mach-zynq | ||
mach-zynqmp | ||
mach-zynqmp-r5 | ||
thumb1/include/asm/proc-armv | ||
config.mk | ||
Kconfig | ||
Kconfig.debug | ||
Makefile |