u-boot/include/configs
Becky Bruce 0914f48328 powerpc: Update configs to properly set FSL_ELBC
Some parts that have an Enhanced Local Bus Controller weren't
setting CONFIG_FSL_ELBC.  Fix this so we can use this define
properly going forward (currently it's only used if PHYS_64BIT is
set, which meant not all platforms needed to have it set correctly).

Signed-off-by: Becky Bruce <beckyb@kernel.crashing.org>
Acked-by: Kim Phillips <kim.phillips@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2010-07-16 10:55:08 -05:00
..
manroland configs: remove unused CONFIG_COMMAND_HISTORY 2010-05-04 23:38:50 +02:00
a320evb.h arm: A320: Add support for Faraday A320 evaluation board 2009-11-27 16:26:17 -06:00
A3000.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
acadia.h common: delete CONFIG_SYS_64BIT_VSPRINTF and CONFIG_SYS_64BIT_STRTOUL 2009-12-08 22:14:07 +01:00
actux1.h Remove nowhere used symbol CONFIG_SYS_CLKS_IN_HZ 2009-03-29 16:04:51 +02:00
actux2.h Remove nowhere used symbol CONFIG_SYS_CLKS_IN_HZ 2009-03-29 16:04:51 +02:00
actux3.h Remove nowhere used symbol CONFIG_SYS_CLKS_IN_HZ 2009-03-29 16:04:51 +02:00
actux4.h Remove nowhere used symbol CONFIG_SYS_CLKS_IN_HZ 2009-03-29 16:04:51 +02:00
ADCIOP.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
Adder.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
AdderUSB.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
ADS860.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
aev.h mpc5xxx: Remove all references to MGT5100 2010-03-21 22:44:42 +01:00
afeb9260.h ARM change name of defines for AT91 arm926ejs 2010-03-07 12:36:35 -06:00
Alaska8220.h Separate mtdparts command from jffs2 2009-03-20 22:39:14 +01:00
alpr.h ppc4xx: alpr: Remove some not needed commands to make image fit again 2010-04-14 10:26:28 +02:00
am3517_evm.h AM35x: Add support for EMIF4 2010-06-08 10:07:19 -05:00
amcc-common.h i2c: Move PPC4xx I2C driver into drivers/i2c directory 2010-04-06 08:10:41 +02:00
AMX860.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
ap325rxa.h Convert SMC911X Ethernet driver to CONFIG_NET_MULTI API 2009-07-22 22:53:44 -07:00
AP1000.h configs: remove unused CONFIG_COMMAND_HISTORY 2010-05-04 23:38:50 +02:00
APC405.h ppc4xx: Fix APC405 build breakage 2010-04-29 10:16:30 +02:00
apollon.h Remove superfluous uses of V_PROMPT macro. 2010-01-04 08:48:16 -06:00
AR405.h ppc4xx: Remove unused feature from AR405 board 2010-02-03 09:17:56 +01:00
aria.h mpc5121: determine RAM size using get_ram_size() 2010-04-24 22:56:35 +02:00
armadillo.h Convert CS8900 Ethernet driver to CONFIG_NET_MULTI API 2009-08-25 13:35:54 -07:00
ASH405.h i2c: Move PPC4xx I2C driver into drivers/i2c directory 2010-04-06 08:10:41 +02:00
assabet.h LAN91C96: Enable NET_MULTI LAN driver 2009-12-13 21:31:26 -08:00
astro_mcf5373l.h ColdFire: Cache update for all platforms 2010-03-24 11:09:37 -05:00
at91cap9adk.h ARM change name of defines for AT91 arm926ejs 2010-03-07 12:36:35 -06:00
at91rm9200dk.h add new CONFIG_AT91_LEGACY 2010-02-12 12:31:54 -06:00
at91rm9200ek.h add new CONFIG_AT91_LEGACY 2010-02-12 12:31:54 -06:00
at91sam9m10g45ek.h ARM change name of defines for AT91 arm926ejs 2010-03-07 12:36:35 -06:00
at91sam9rlek.h ARM change name of defines for AT91 arm926ejs 2010-03-07 12:36:35 -06:00
at91sam9260ek.h ARM change name of defines for AT91 arm926ejs 2010-03-07 12:36:35 -06:00
at91sam9261ek.h ARM change name of defines for AT91 arm926ejs 2010-03-07 12:36:35 -06:00
at91sam9263ek.h ARM change name of defines for AT91 arm926ejs 2010-03-07 12:36:35 -06:00
atc.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
atngw100.h Add "source" command; prepare removal of "autoscr" command 2009-04-03 22:01:42 +02:00
atstk1002.h Add "source" command; prepare removal of "autoscr" command 2009-04-03 22:01:42 +02:00
atstk1003.h Merge branch 'fixes' into cleanups 2008-12-17 16:53:07 +01:00
atstk1004.h Merge branch 'fixes' into cleanups 2008-12-17 16:53:07 +01:00
atstk1006.h Add "source" command; prepare removal of "autoscr" command 2009-04-03 22:01:42 +02:00
ATUM8548.h ppc/85xx: Clean up ATUM8548 PCI setup code 2010-01-05 13:49:06 -06:00
B2.h Move lib_$ARCH directories to arch/$ARCH/lib 2010-04-13 09:13:03 +02:00
BAB7xx.h Get rid of bogus CONFIG_SYS_BUS_HZ and CONFIG_SYS_CONFIG_BUS_CLK definitions 2010-06-23 23:24:11 +02:00
bamboo.h NAND: rename NAND_MAX_CHIPS to CONFIG_SYS_NAND_MAX_CHIPS 2009-01-23 10:32:51 -06:00
barco.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
BC3450.h mpc5xxx: Remove all references to MGT5100 2010-03-21 22:44:42 +01:00
bf518f-ezbrd.h Blackfin: unify default I2C settings for ADI boards 2010-07-13 17:50:52 -04:00
bf526-ezbrd.h Blackfin: unify default I2C settings for ADI boards 2010-07-13 17:50:52 -04:00
bf527-ad7160-eval.h Blackfin: bf527-ad7160-eval: new board support 2010-07-13 17:50:52 -04:00
bf527-ezkit.h Blackfin: unify default I2C settings for ADI boards 2010-07-13 17:50:52 -04:00
bf533-ezkit.h Blackfin: unify default I2C settings for ADI boards 2010-07-13 17:50:52 -04:00
bf533-stamp.h Blackfin: unify default I2C settings for ADI boards 2010-07-13 17:50:52 -04:00
bf537-minotaur.h Blackfin: tweak embedded LDR env config option 2010-01-17 09:17:26 -05:00
bf537-pnav.h Merge branch 'master' of git://git.denx.de/u-boot-blackfin 2010-07-14 21:54:45 +02:00
bf537-srv1.h Blackfin: tweak embedded LDR env config option 2010-01-17 09:17:26 -05:00
bf537-stamp.h Merge branch 'master' of git://git.denx.de/u-boot-blackfin 2010-07-14 21:54:45 +02:00
bf538f-ezkit.h Blackfin: unify default I2C settings for ADI boards 2010-07-13 17:50:52 -04:00
bf548-ezkit.h Blackfin: unify default I2C settings for ADI boards 2010-07-13 17:50:52 -04:00
bf561-acvilon.h Merge branch 'master' of git://git.denx.de/u-boot-blackfin 2010-07-14 21:54:45 +02:00
bf561-ezkit.h Blackfin: unify default I2C settings for ADI boards 2010-07-13 17:50:52 -04:00
bfin_adi_common.h Blackfin: enable IP defrag for ADI boards 2010-07-13 17:50:52 -04:00
blackstamp.h Convert SMC91111 Ethernet driver to CONFIG_NET_MULTI API 2009-10-04 22:37:03 -07:00
BMW.h Remove legacy NAND and disk on chip references from boards. 2009-07-17 15:03:28 -05:00
bubinga.h i2c: Update references to individual i2c commands 2009-06-12 20:39:46 +02:00
c2mon.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
CANBT.h i2c: Move PPC4xx I2C driver into drivers/i2c directory 2010-04-06 08:10:41 +02:00
canmb.h net: removed board-specific CONFIGs from MPC5xxx FEC driver 2009-02-09 23:01:40 -08:00
canyonlands.h ppc4xx: Canyonlands: Change EBC bus config to drive always (no high-z) 2009-11-09 13:30:19 +01:00
CATcenter.h Remove legacy NAND and disk on chip references from boards. 2009-07-17 15:03:28 -05:00
CCM.h ppc: Clean up calling of phy_reset() during init 2009-09-22 23:05:29 +02:00
cerf250.h Convert SMC91111 Ethernet driver to CONFIG_NET_MULTI API 2009-10-04 22:37:03 -07:00
cm-bf527.h Blackfin: unify default I2C settings for ADI boards 2010-07-13 17:50:52 -04:00
cm-bf533.h Blackfin: update tiny board settings (voltage/default env) 2010-01-17 09:17:26 -05:00
cm-bf537e.h Blackfin: unify default I2C settings for ADI boards 2010-07-13 17:50:52 -04:00
cm-bf537u.h Blackfin: unify default I2C settings for ADI boards 2010-07-13 17:50:52 -04:00
cm-bf548.h Blackfin: unify default I2C settings for ADI boards 2010-07-13 17:50:52 -04:00
cm-bf561.h Blackfin: cm-bf561: update network/env settings 2010-04-07 01:10:34 -04:00
cm41xx.h ks8695: move serial driver to drivers/serial 2009-03-29 23:01:42 +02:00
cm4008.h ks8695: move serial driver to drivers/serial 2009-03-29 23:01:42 +02:00
cm5200.h mtd: MTD related config header changes (mtdparts command) 2009-06-12 20:45:47 +02:00
cmc_pu2.h add new CONFIG_AT91_LEGACY 2010-02-12 12:31:54 -06:00
cmi_mpc5xx.h rename CONFIG_CMD_ENV to CONFIG_CMD_SAVEENV 2009-02-18 00:47:43 +01:00
CMS700.h i2c: Move PPC4xx I2C driver into drivers/i2c directory 2010-04-06 08:10:41 +02:00
cobra5272.h ColdFire: Cache update for all platforms 2010-03-24 11:09:37 -05:00
cogent_common.h * Patch by Shlomo Kut, 29 Mar 2004: 2004-09-29 11:02:56 +00:00
cogent_mpc8xx.h ppc: Clean up calling of misc_init_r() during init 2009-09-22 23:04:44 +02:00
cogent_mpc8260.h ppc: Clean up calling of misc_init_r() during init 2009-09-22 23:04:44 +02:00
CPC45.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
CPCI2DP.h i2c: Move PPC4xx I2C driver into drivers/i2c directory 2010-04-06 08:10:41 +02:00
CPCI405.h i2c: Move PPC4xx I2C driver into drivers/i2c directory 2010-04-06 08:10:41 +02:00
CPCI405AB.h i2c: Move PPC4xx I2C driver into drivers/i2c directory 2010-04-06 08:10:41 +02:00
CPCI405DT.h i2c: Move PPC4xx I2C driver into drivers/i2c directory 2010-04-06 08:10:41 +02:00
CPCI750.h Get rid of bogus CONFIG_SYS_BUS_HZ and CONFIG_SYS_CONFIG_BUS_CLK definitions 2010-06-23 23:24:11 +02:00
CPCI4052.h i2c: Move PPC4xx I2C driver into drivers/i2c directory 2010-04-06 08:10:41 +02:00
cpci5200.h mpc5xxx: Remove all references to MGT5100 2010-03-21 22:44:42 +01:00
CPCIISER4.h i2c: Move PPC4xx I2C driver into drivers/i2c directory 2010-04-06 08:10:41 +02:00
CPU86.h Remove legacy NAND and disk on chip references from boards. 2009-07-17 15:03:28 -05:00
CPU87.h Remove legacy NAND and disk on chip references from boards. 2009-07-17 15:03:28 -05:00
cpu9260.h ARM change name of defines for AT91 arm926ejs 2010-03-07 12:36:35 -06:00
cpuat91.h cpuat91: unbreak ethernet 2010-07-12 00:14:29 -07:00
cradle.h Convert SMC91111 Ethernet driver to CONFIG_NET_MULTI API 2009-10-04 22:37:03 -07:00
CRAYL1.h i2c: Move PPC4xx I2C driver into drivers/i2c directory 2010-04-06 08:10:41 +02:00
csb226.h Convert CS8900 Ethernet driver to CONFIG_NET_MULTI API 2009-08-25 13:35:54 -07:00
csb272.h i2c: Move PPC4xx I2C driver into drivers/i2c directory 2010-04-06 08:10:41 +02:00
csb472.h i2c: Move PPC4xx I2C driver into drivers/i2c directory 2010-04-06 08:10:41 +02:00
csb637.h add new CONFIG_AT91_LEGACY 2010-02-12 12:31:54 -06:00
CU824.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
da830evm.h DaVinci: EMAC: Get EMAC_MDIO_PHY_NUM from config files 2010-06-22 10:24:43 -04:00
da850evm.h TI: DaVinci: Add board specific code for da850 EVM 2010-06-10 12:04:42 -04:00
DASA_SIM.h ppc4xx: Update TEXT_BASE for DASA_SIM boards 2009-03-20 22:39:13 +01:00
davinci_dm355evm.h Davinci: Configurable NAND chip selects 2010-01-04 08:48:17 -06:00
davinci_dm355leopard.h Davinci: Configurable NAND chip selects 2010-01-04 08:48:17 -06:00
davinci_dm365evm.h DaVinci: EMAC: Get EMAC_MDIO_PHY_NUM from config files 2010-06-22 10:24:43 -04:00
davinci_dm6467evm.h Davinci: Configurable NAND chip selects 2010-01-04 08:48:17 -06:00
davinci_dvevm.h DaVinci: EMAC: Get EMAC_MDIO_PHY_NUM from config files 2010-06-22 10:24:43 -04:00
davinci_schmoogie.h DaVinci: EMAC: Get EMAC_MDIO_PHY_NUM from config files 2010-06-22 10:24:43 -04:00
davinci_sffsdr.h DaVinci: EMAC: Get EMAC_MDIO_PHY_NUM from config files 2010-06-22 10:24:43 -04:00
davinci_sonata.h DaVinci: EMAC: Get EMAC_MDIO_PHY_NUM from config files 2010-06-22 10:24:43 -04:00
DB64360.h Get rid of bogus CONFIG_SYS_BUS_HZ and CONFIG_SYS_CONFIG_BUS_CLK definitions 2010-06-23 23:24:11 +02:00
DB64460.h Get rid of bogus CONFIG_SYS_BUS_HZ and CONFIG_SYS_CONFIG_BUS_CLK definitions 2010-06-23 23:24:11 +02:00
dbau1x00.h rename CONFIG_CMD_ENV to CONFIG_CMD_SAVEENV 2009-02-18 00:47:43 +01:00
debris.h Separate mtdparts command from jffs2 2009-03-20 22:39:14 +01:00
delta.h common: delete CONFIG_SYS_64BIT_VSPRINTF and CONFIG_SYS_64BIT_STRTOUL 2009-12-08 22:14:07 +01:00
devkit8000.h omap3: Consolidate SDRC related operations 2010-06-08 10:07:18 -05:00
digsy_mtc.h digsy_mtc: Add TCR register value for RTC (DS1339) 2009-09-24 00:21:06 +02:00
dlvision.h ppc4xx: Add DL-Vision 405EP board support 2009-07-24 06:42:31 +02:00
dnp1110.h Convert SMC91111 Ethernet driver to CONFIG_NET_MULTI API 2009-10-04 22:37:03 -07:00
DP405.h i2c: Move PPC4xx I2C driver into drivers/i2c directory 2010-04-06 08:10:41 +02:00
DU405.h i2c: Move PPC4xx I2C driver into drivers/i2c directory 2010-04-06 08:10:41 +02:00
DU440.h i2c: Move PPC4xx I2C driver into drivers/i2c directory 2010-04-06 08:10:41 +02:00
EB+MCF-EV123.h ColdFire: Cache update for all platforms 2010-03-24 11:09:37 -05:00
eb_cpux9k2.h new board (eb_cpux9k2) 2010-02-12 12:36:04 -06:00
ebony.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
edb93xx.h Add support for EDB93xx boards 2010-02-12 12:31:54 -06:00
edminiv2.h edminiv2: add ethernet support 2010-07-12 23:40:31 -07:00
ELPPC.h Get rid of bogus CONFIG_SYS_BUS_HZ and CONFIG_SYS_CONFIG_BUS_CLK definitions 2010-06-23 23:24:11 +02:00
ELPT860.h ppc: Clean up calling of phy_reset() during init 2009-09-22 23:05:29 +02:00
eNET.h eNET: Implement eNET Watchdog 2010-05-06 00:20:04 +02:00
ep82xxm.h Update all board to support new bbmiiphy driver (with multibus support) 2009-10-10 23:16:55 -07:00
EP88x.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
ep7312.h Convert CS8900 Ethernet driver to CONFIG_NET_MULTI API 2009-08-25 13:35:54 -07:00
ep8248.h Update all board to support new bbmiiphy driver (with multibus support) 2009-10-10 23:16:55 -07:00
ep8260.h Separate mtdparts command from jffs2 2009-03-20 22:39:14 +01:00
ERIC.h i2c: Move PPC4xx I2C driver into drivers/i2c directory 2010-04-06 08:10:41 +02:00
espt.h sh: Add support ESPT-GIGA borad 2009-07-11 09:02:21 +09:00
ESTEEM192E.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
ETX094.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
evb4510.h arm: clean cache management 2009-04-05 13:06:31 +02:00
EVB64260.h Get rid of bogus CONFIG_SYS_BUS_HZ and CONFIG_SYS_CONFIG_BUS_CLK definitions 2010-06-23 23:24:11 +02:00
eXalion.h rename CONFIG_CMD_ENV to CONFIG_CMD_SAVEENV 2009-02-18 00:47:43 +01:00
EXBITGEN.h Enable CONFIG_NET_MULTI on all remaining PPC4xx boards 2009-06-12 20:39:47 +02:00
FADS823.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
FADS850SAR.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
FADS860T.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
favr-32-ezkit.h Add "source" command; prepare removal of "autoscr" command 2009-04-03 22:01:42 +02:00
FLAGADM.h 8xx, icache: enabling ICache not before running from RAM 2009-03-18 20:48:29 +01:00
FPS850L.h TQM8xx: enable device tree support on all TQM8xx based boards. 2010-03-12 00:06:07 +01:00
FPS860L.h TQM8xx: enable device tree support on all TQM8xx based boards. 2010-03-12 00:06:07 +01:00
fx12mm.h mtd: MTD related config header changes (mtdparts command) 2009-06-12 20:45:47 +02:00
G2000.h i2c: Move PPC4xx I2C driver into drivers/i2c directory 2010-04-06 08:10:41 +02:00
galaxy5200.h Move arch/ppc to arch/powerpc 2010-04-21 23:42:38 +02:00
gcplus.h LAN91C96: Enable NET_MULTI LAN driver 2009-12-13 21:31:26 -08:00
gdppc440etx.h ppc4xx: Add GDsys PowerPC 440 ETX board support. 2009-01-26 10:13:30 +01:00
GEN860T.h Remove legacy NAND and disk on chip references from boards. 2009-07-17 15:03:28 -05:00
GENIETV.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
gr_cpci_ax2000.h Convert SMC91111 Ethernet driver to CONFIG_NET_MULTI API 2009-10-04 22:37:03 -07:00
gr_ep2s60.h Convert SMC91111 Ethernet driver to CONFIG_NET_MULTI API 2009-10-04 22:37:03 -07:00
gr_xc3s_1500.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
grsim.h Add "source" command; prepare removal of "autoscr" command 2009-04-03 22:01:42 +02:00
grsim_leon2.h Add "source" command; prepare removal of "autoscr" command 2009-04-03 22:01:42 +02:00
GTH.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
gth2.h Add "source" command; prepare removal of "autoscr" command 2009-04-03 22:01:42 +02:00
guruplug.h mvgbe: support SoCs other than kirkwood 2010-07-12 23:40:31 -07:00
gw8260.h Update all board to support new bbmiiphy driver (with multibus support) 2009-10-10 23:16:55 -07:00
h2_p2_dbg_board.h * Code cleanup (ARM mostly) 2004-07-01 16:30:44 +00:00
hammerhead.h Merge branch 'fixes' into cleanups 2008-12-17 16:53:07 +01:00
hcu4.h ppc4xx: Update configs for Netstal boards 2008-10-21 17:34:57 +02:00
hcu5.h ppc4xx: Update configs for Netstal boards 2008-10-21 17:34:57 +02:00
hermes.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
HH405.h i2c: Move PPC4xx I2C driver into drivers/i2c directory 2010-04-06 08:10:41 +02:00
HIDDEN_DRAGON.h remove _IO_BASE and KSEG1ADDR from board configuration files 2009-07-11 00:19:16 +02:00
HMI10.h TQM8xx: enable device tree support on all TQM8xx based boards. 2010-03-12 00:06:07 +01:00
hmi1001.h mpc5xxx: Remove all references to MGT5100 2010-03-21 22:44:42 +01:00
HUB405.h i2c: Move PPC4xx I2C driver into drivers/i2c directory 2010-04-06 08:10:41 +02:00
hymod.h Update all board to support new bbmiiphy driver (with multibus support) 2009-10-10 23:16:55 -07:00
IAD210.h boards: move board_get_enetaddr() into board-specific init 2009-03-20 22:39:12 +01:00
ibf-dsp561.h Blackfin: unify default I2C settings for ADI boards 2010-07-13 17:50:52 -04:00
IceCube.h mpc5xxx: Remove all references to MGT5100 2010-03-21 22:44:42 +01:00
icon.h ppc4xx: icon: add support for SM502 chip 2010-06-17 23:12:15 +02:00
ICU862.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
idmr.h ColdFire: Cache update for all platforms 2010-03-24 11:09:37 -05:00
IDS8247.h common: delete CONFIG_SYS_64BIT_VSPRINTF and CONFIG_SYS_64BIT_STRTOUL 2009-12-08 22:14:07 +01:00
impa7.h Convert CS8900 Ethernet driver to CONFIG_NET_MULTI API 2009-08-25 13:35:54 -07:00
imx27lite-common.h arm, i.mx27: add support for magnesium board from projectiondesign 2010-04-30 05:23:23 -05:00
imx27lite.h arm, i.mx27: add support for magnesium board from projectiondesign 2010-04-30 05:23:23 -05:00
imx31_litekit.h MX: RTC13783 uses general function to access PMIC 2010-05-05 09:48:41 +02:00
imx31_phycore.h Convert SMC911X Ethernet driver to CONFIG_NET_MULTI API 2009-07-22 22:53:44 -07:00
incaip.h Separate mtdparts command from jffs2 2009-03-20 22:39:14 +01:00
inka4x0.h mpc5xxx: Remove all references to MGT5100 2010-03-21 22:44:42 +01:00
innokom.h Convert SMC91111 Ethernet driver to CONFIG_NET_MULTI API 2009-10-04 22:37:03 -07:00
integratorap.h integratorap/cp: use cfi driver 2009-06-23 00:10:04 +02:00
integratorcp.h Convert SMC91111 Ethernet driver to CONFIG_NET_MULTI API 2009-10-04 22:37:03 -07:00
intip.h ppc4xx: Make DDR2 timing for intip more robust 2009-09-23 15:46:02 +02:00
ip04.h Blackfin: convert plat-nand code to GPIO framework 2010-07-08 16:52:13 -05:00
IP860.h ppc: Clean up calling of phy_reset() during init 2009-09-22 23:05:29 +02:00
ipek01.h mpc5xxx: Remove all references to MGT5100 2010-03-21 22:44:42 +01:00
IPHASE4539.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
ISPAN.h Update all board to support new bbmiiphy driver (with multibus support) 2009-10-10 23:16:55 -07:00
IVML24.h ppc: Clean up calling of phy_reset() during init 2009-09-22 23:05:29 +02:00
IVMS8.h ppc: Clean up calling of phy_reset() during init 2009-09-22 23:05:29 +02:00
ixdp425.h Remove nowhere used symbol CONFIG_SYS_CLKS_IN_HZ 2009-03-29 16:04:51 +02:00
ixdpg425.h arm: timer and interrupt init rework 2009-06-12 20:39:48 +02:00
JSE.h i2c: Move PPC4xx I2C driver into drivers/i2c directory 2010-04-06 08:10:41 +02:00
jupiter.h net: removed board-specific CONFIGs from MPC5xxx FEC driver 2009-02-09 23:01:40 -08:00
KAREF.h i2c: Move PPC4xx I2C driver into drivers/i2c directory 2010-04-06 08:10:41 +02:00
katmai.h ppc4xx: Add option for PPC440SPe ports without old Rev. A support 2010-04-14 10:27:39 +02:00
kb9202.h add new CONFIG_AT91_LEGACY 2010-02-12 12:31:54 -06:00
keymile-common.h configs: remove unused CONFIG_COMMAND_HISTORY 2010-05-04 23:38:50 +02:00
kilauea.h Move arch/ppc to arch/powerpc 2010-04-21 23:42:38 +02:00
km8xx.h powerpc: updates for the keymile boards 2009-07-21 00:06:11 +02:00
km_arm.h mvgbe: support SoCs other than kirkwood 2010-07-12 23:40:31 -07:00
kmeter1.h mpc83xx: turn on icache in core initialization to improve u-boot boot time 2010-04-22 18:44:56 -05:00
kmsupx4.h 8xx: add support for new keymile kmsupx4 board. 2009-03-18 20:50:05 +01:00
korat.h i2c: Move PPC4xx I2C driver into drivers/i2c directory 2010-04-06 08:10:41 +02:00
KUP4K.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
KUP4X.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
kvme080.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
LANTEC.h Separate mtdparts command from jffs2 2009-03-20 22:39:14 +01:00
lart.h Convert CS8900 Ethernet driver to CONFIG_NET_MULTI API 2009-08-25 13:35:54 -07:00
linkstation.h Move arch/ppc to arch/powerpc 2010-04-21 23:42:38 +02:00
logodl.h Convert SMC91111 Ethernet driver to CONFIG_NET_MULTI API 2009-10-04 22:37:03 -07:00
lpc2292sodimm.h arm: cleanup remaining CONFIG_INIT_CRITICAL 2009-06-12 20:39:48 +02:00
lpd7a400-10.h Fix SMC91111 regression: lpd7a40x build failures 2009-11-09 21:56:18 -08:00
lpd7a400.h lh7a40x: move serial driver to drivers/serial 2009-06-12 20:39:53 +02:00
lpd7a404-10.h Fix SMC91111 regression: lpd7a40x build failures 2009-11-09 21:56:18 -08:00
lpd7a404.h Fix SMC91111 regression: lpd7a40x build failures 2009-11-09 21:56:18 -08:00
luan.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
lubbock.h LAN91C96: Enable NET_MULTI LAN driver 2009-12-13 21:31:26 -08:00
lwmon.h ppc: Clean up calling of misc_init_r() during init 2009-09-22 23:04:44 +02:00
lwmon5.h i2c: Move PPC4xx I2C driver into drivers/i2c directory 2010-04-06 08:10:41 +02:00
m501sk.h add new CONFIG_AT91_LEGACY 2010-02-12 12:31:54 -06:00
M5208EVBE.h ColdFire: Cache update for all platforms 2010-03-24 11:09:37 -05:00
M5235EVB.h ColdFire: Cache update for all platforms 2010-03-24 11:09:37 -05:00
M5249EVB.h ColdFire: Cache update for all platforms 2010-03-24 11:09:37 -05:00
M5253DEMO.h ColdFire: Fix incorrect M5253DEMO default environment 2010-03-24 11:09:39 -05:00
M5253EVBE.h ColdFire: Cache update for all platforms 2010-03-24 11:09:37 -05:00
M5271EVB.h ColdFire: Cache update for all platforms 2010-03-24 11:09:37 -05:00
M5272C3.h ColdFire: Cache update for all platforms 2010-03-24 11:09:37 -05:00
M5275EVB.h ColdFire: Cache update for all platforms 2010-03-24 11:09:37 -05:00
M5282EVB.h ColdFire: Cache update for all platforms 2010-03-24 11:09:37 -05:00
M5329EVB.h ColdFire: Cache update for all platforms 2010-03-24 11:09:37 -05:00
M5373EVB.h ColdFire: Cache update for all platforms 2010-03-24 11:09:37 -05:00
M5475EVB.h ColdFire: Cache update for all platforms 2010-03-24 11:09:37 -05:00
M5485EVB.h ColdFire: Cache update for all platforms 2010-03-24 11:09:37 -05:00
M52277EVB.h ColdFire: Cache update for all platforms 2010-03-24 11:09:37 -05:00
M53017EVB.h ColdFire: Cache update for all platforms 2010-03-24 11:09:37 -05:00
M54451EVB.h ColdFire: Cache update for all platforms 2010-03-24 11:09:37 -05:00
M54455EVB.h ColdFire: Cache update for all platforms 2010-03-24 11:09:37 -05:00
magnesium.h arm, i.mx27: add support for magnesium board from projectiondesign 2010-04-30 05:23:23 -05:00
makalu.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
MBX.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
MBX860T.h ppc: cleanup compiler errors/warnings 2009-03-27 20:23:32 +01:00
mcc200.h mcc200: fix build error 2009-10-19 09:18:57 +02:00
mcu25.h ppc4xx: Update configs for Netstal boards 2008-10-21 17:34:57 +02:00
mecp5123.h mpc5121: determine RAM size using get_ram_size() 2010-04-24 22:56:35 +02:00
mecp5200.h mpc5xxx: Remove all references to MGT5100 2010-03-21 22:44:42 +01:00
meesc.h at91: boards cleanup for deprecated CONFIG_CMD_AUTOSCRIPT 2010-04-03 15:24:27 -05:00
METROBOX.h i2c: Move PPC4xx I2C driver into drivers/i2c directory 2010-04-06 08:10:41 +02:00
mgcoge.h FDT: remove obsolete OF_CPU and OF_SOC macros. 2009-09-22 22:59:27 +02:00
mgsuvd.h 8xx, mgsuvd: rename board to a more generic name 2009-03-18 20:50:04 +01:00
MHPC.h Separate mtdparts command from jffs2 2009-03-20 22:39:14 +01:00
microblaze-generic.h microblaze: Stop stack clobbering in microblaze-generic. 2009-12-08 08:51:42 +01:00
MigoR.h Convert SMC91111 Ethernet driver to CONFIG_NET_MULTI API 2009-10-04 22:37:03 -07:00
mimc200.h MIMC200: set default fbmem value 2009-11-22 22:07:17 +01:00
MIP405.h i2c: Move PPC4xx I2C driver into drivers/i2c directory 2010-04-06 08:10:41 +02:00
ML2.h Separate mtdparts command from jffs2 2009-03-20 22:39:14 +01:00
ml507.h ppc4xx: Merge xilinx-ppc440 and xilinx-ppc405 cfg 2008-10-31 10:31:02 +01:00
modnet50.h netarm: move serial driver to drivers/serial 2009-03-29 23:01:41 +02:00
motionpro.h mtd: MTD related config header changes (mtdparts command) 2009-06-12 20:45:47 +02:00
MOUSSE.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
mp2usb.h add new CONFIG_AT91_LEGACY 2010-02-12 12:31:54 -06:00
MPC86xADS.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
MPC832XEMDS.h mpc83xx: turn on icache in core initialization to improve u-boot boot time 2010-04-22 18:44:56 -05:00
MPC837XEMDS.h powerpc: Update configs to properly set FSL_ELBC 2010-07-16 10:55:08 -05:00
MPC837XERDB.h powerpc: Update configs to properly set FSL_ELBC 2010-07-16 10:55:08 -05:00
MPC885ADS.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
mpc5121-common.h mpc5121: add support for PDM360NG board 2010-04-24 22:56:37 +02:00
mpc5121ads.h mpc5121: determine RAM size using get_ram_size() 2010-04-24 22:56:35 +02:00
mpc7448hpc2.h Get rid of bogus CONFIG_SYS_BUS_HZ and CONFIG_SYS_CONFIG_BUS_CLK definitions 2010-06-23 23:24:11 +02:00
MPC8260ADS.h Update all board to support new bbmiiphy driver (with multibus support) 2009-10-10 23:16:55 -07:00
MPC8266ADS.h Update all board to support new bbmiiphy driver (with multibus support) 2009-10-10 23:16:55 -07:00
MPC8308RDB.h MPC8308RDB: minimal support for devboard from Freescale 2010-07-09 16:10:36 -05:00
MPC8313ERDB.h powerpc: Update configs to properly set FSL_ELBC 2010-07-16 10:55:08 -05:00
MPC8315ERDB.h powerpc: Update configs to properly set FSL_ELBC 2010-07-16 10:55:08 -05:00
MPC8323ERDB.h mpc83xx: turn on icache in core initialization to improve u-boot boot time 2010-04-22 18:44:56 -05:00
MPC8349EMDS.h mpc83xx: turn on icache in core initialization to improve u-boot boot time 2010-04-22 18:44:56 -05:00
MPC8349ITX.h mpc83xx: turn on icache in core initialization to improve u-boot boot time 2010-04-22 18:44:56 -05:00
MPC8360EMDS.h mpc83xx: turn on icache in core initialization to improve u-boot boot time 2010-04-22 18:44:56 -05:00
MPC8360ERDK.h mpc83xx: turn on icache in core initialization to improve u-boot boot time 2010-04-22 18:44:56 -05:00
MPC8536DS.h ppc/85xx: Use CONFIG_NS16550_MIN_FUNCTIONS to reduce NAND_SPL size 2010-04-07 01:34:39 -05:00
MPC8540ADS.h common: delete CONFIG_SYS_64BIT_VSPRINTF and CONFIG_SYS_64BIT_STRTOUL 2009-12-08 22:14:07 +01:00
MPC8540EVAL.h rename CONFIG_CMD_ENV to CONFIG_CMD_SAVEENV 2009-02-18 00:47:43 +01:00
MPC8541CDS.h common: delete CONFIG_SYS_64BIT_VSPRINTF and CONFIG_SYS_64BIT_STRTOUL 2009-12-08 22:14:07 +01:00
MPC8544DS.h common: delete CONFIG_SYS_64BIT_VSPRINTF and CONFIG_SYS_64BIT_STRTOUL 2009-12-08 22:14:07 +01:00
MPC8548CDS.h common: delete CONFIG_SYS_64BIT_VSPRINTF and CONFIG_SYS_64BIT_STRTOUL 2009-12-08 22:14:07 +01:00
MPC8555CDS.h common: delete CONFIG_SYS_64BIT_VSPRINTF and CONFIG_SYS_64BIT_STRTOUL 2009-12-08 22:14:07 +01:00
MPC8560ADS.h common: delete CONFIG_SYS_64BIT_VSPRINTF and CONFIG_SYS_64BIT_STRTOUL 2009-12-08 22:14:07 +01:00
MPC8568MDS.h 83xx, uec: split enet_interface in two variables 2010-01-31 22:37:12 -08:00
MPC8569MDS.h ppc/85xx: Use CONFIG_NS16550_MIN_FUNCTIONS to reduce NAND_SPL size 2010-04-07 01:34:39 -05:00
MPC8572DS.h ppc/85xx: Remove CONFIG_SYS_DDR_TLB_START 2010-01-05 13:49:08 -06:00
MPC8610HPCD.h fsl: improve the PIXIS code and fix a few bugs 2010-04-07 00:21:27 -05:00
MPC8641HPCN.h mpc86xx: set the DDR BATs after calculating true DDR size 2010-03-30 10:50:22 -05:00
mpr2.h sh3/sh4: rename config option TMU_CLK_DIVIDER to CONFIG_SYS_TMU_CLK_DIV 2009-07-08 11:43:16 +09:00
ms7720se.h sh3/sh4: rename config option TMU_CLK_DIVIDER to CONFIG_SYS_TMU_CLK_DIV 2009-07-08 11:43:16 +09:00
ms7722se.h Convert SMC91111 Ethernet driver to CONFIG_NET_MULTI API 2009-10-04 22:37:03 -07:00
ms7750se.h sh3/sh4: rename config option TMU_CLK_DIVIDER to CONFIG_SYS_TMU_CLK_DIV 2009-07-08 11:43:16 +09:00
muas3001.h Update all board to support new bbmiiphy driver (with multibus support) 2009-10-10 23:16:55 -07:00
mucmc52.h mpc5200, mucmc52, uc101: config cleanup 2009-09-25 01:19:17 +02:00
munices.h net: removed board-specific CONFIGs from MPC5xxx FEC driver 2009-02-09 23:01:40 -08:00
MUSENKI.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
mv88f6281gtw_ge.h mvgbe: support SoCs other than kirkwood 2010-07-12 23:40:31 -07:00
MVBC_P.h Remove deprecated 'autoscr' command/variables 2009-09-22 23:03:24 +02:00
MVBLM7.h mpc83xx/mvBLM7: add usb commands and cleanup. 2010-05-07 12:20:15 -05:00
MVBLUE.h MVBLUE: Remove CONFIG_CMD_IRQ 2009-12-14 21:31:17 +01:00
MVS1.h rename CONFIG_CMD_ENV to CONFIG_CMD_SAVEENV 2009-02-18 00:47:43 +01:00
MVSMR.h Add initial support for Matrix Vision mvSMR board based on MPC5200B. 2010-04-10 00:06:05 +02:00
mx1ads.h Convert CS8900 Ethernet driver to CONFIG_NET_MULTI API 2009-08-25 13:35:54 -07:00
mx1fs2.h mtd: MTD related config header changes (mtdparts command) 2009-06-12 20:45:47 +02:00
mx31ads.h MX: RTC13783 uses general function to access PMIC 2010-05-05 09:48:41 +02:00
mx31pdk.h MX: RTC13783 uses general function to access PMIC 2010-05-05 09:48:41 +02:00
mx51evk.h Add SPI support to mx51evk board 2010-05-05 09:48:41 +02:00
NC650.h Separate mtdparts command from jffs2 2009-03-20 22:39:14 +01:00
neo.h ppc4xx: Add GDSys neo 405EP board support 2008-10-21 17:35:02 +02:00
NETPHONE.h Fix boards broken after removal of legacy NAND and DoC support 2009-07-19 19:37:24 +02:00
netstal-common.h i2c: Move PPC4xx I2C driver into drivers/i2c directory 2010-04-06 08:10:41 +02:00
netstar.h netstar.h: do not exceed 80 columns 2010-03-07 12:36:35 -06:00
NETTA.h Fix boards broken after removal of legacy NAND and DoC support 2009-07-19 19:37:24 +02:00
NETTA2.h Fix boards broken after removal of legacy NAND and DoC support 2009-07-19 19:37:24 +02:00
NETVIA.h Fix boards broken after removal of legacy NAND and DoC support 2009-07-19 19:37:24 +02:00
nhk8815.h common: delete CONFIG_SYS_64BIT_VSPRINTF and CONFIG_SYS_64BIT_STRTOUL 2009-12-08 22:14:07 +01:00
nios2-generic.h nios2: add gpio support to nios2-generic board 2010-05-28 10:56:03 -04:00
ns9750dev.h Remove nowhere used symbol CONFIG_SYS_CLKS_IN_HZ 2009-03-29 16:04:51 +02:00
NSCU.h TQM8xx: enable device tree support on all TQM8xx based boards. 2010-03-12 00:06:07 +01:00
NX823.h Add "source" command; prepare removal of "autoscr" command 2009-04-03 22:01:42 +02:00
o2dnt.h mpc5xxx: Remove all references to MGT5100 2010-03-21 22:44:42 +01:00
ocotea.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
OCRTC.h i2c: Move PPC4xx I2C driver into drivers/i2c directory 2010-04-06 08:10:41 +02:00
omap3_beagle.h omap3: Consolidate SDRC related operations 2010-06-08 10:07:18 -05:00
omap3_evm.h omap3: Consolidate SDRC related operations 2010-06-08 10:07:18 -05:00
omap3_overo.h omap3: Consolidate SDRC related operations 2010-06-08 10:07:18 -05:00
omap3_pandora.h omap3: Consolidate SDRC related operations 2010-06-08 10:07:18 -05:00
omap3_sdp3430.h omap3: Consolidate SDRC related operations 2010-06-08 10:07:18 -05:00
omap3_zoom1.h omap3: Consolidate SDRC related operations 2010-06-08 10:07:18 -05:00
omap3_zoom2.h omap3: Consolidate SDRC related operations 2010-06-08 10:07:18 -05:00
omap730.h ARM OMAP : Correct Invalid Timer Register Field Declaration in omap1510.h & omap730.h 2008-09-12 02:20:40 +02:00
omap730p2.h LAN91C96: Enable NET_MULTI LAN driver 2009-12-13 21:31:26 -08:00
omap1510.h ARM OMAP : Correct Invalid Timer Register Field Declaration in omap1510.h & omap730.h 2008-09-12 02:20:40 +02:00
omap1510inn.h LAN91C96: Enable NET_MULTI LAN driver 2009-12-13 21:31:26 -08:00
omap1610h2.h LAN91C96: Enable NET_MULTI LAN driver 2009-12-13 21:31:26 -08:00
omap1610inn.h LAN91C96: Enable NET_MULTI LAN driver 2009-12-13 21:31:26 -08:00
omap2420h4.h Remove superfluous uses of V_PROMPT macro. 2010-01-04 08:48:16 -06:00
omap5912osk.h LAN91C96: Enable NET_MULTI LAN driver 2009-12-13 21:31:26 -08:00
openrd_base.h mvgbe: support SoCs other than kirkwood 2010-07-12 23:40:31 -07:00
ORSG.h i2c: Move PPC4xx I2C driver into drivers/i2c directory 2010-04-06 08:10:41 +02:00
otc570.h at91: boards cleanup for deprecated CONFIG_CMD_AUTOSCRIPT 2010-04-03 15:24:27 -05:00
OXC.h unify {CONFIG_,}ENV_IS_EMBEDDED 2009-08-25 12:57:54 +02:00
P1_P2_RDB.h 85xx/p1_p2_rdb: enable hwconfig 2010-07-16 10:55:08 -05:00
P3G4.h Get rid of bogus CONFIG_SYS_BUS_HZ and CONFIG_SYS_CONFIG_BUS_CLK definitions 2010-06-23 23:24:11 +02:00
p3mx.h Get rid of bogus CONFIG_SYS_BUS_HZ and CONFIG_SYS_CONFIG_BUS_CLK definitions 2010-06-23 23:24:11 +02:00
p3p440.h i2c: Move PPC4xx I2C driver into drivers/i2c directory 2010-04-06 08:10:41 +02:00
P2020DS.h Move ICS CLK chip frequency calculation code into a common board library 2010-07-16 10:55:08 -05:00
PATI.h rename CONFIG_CMD_ENV to CONFIG_CMD_SAVEENV 2009-02-18 00:47:43 +01:00
pb1x00.h rename CONFIG_CMD_ENV to CONFIG_CMD_SAVEENV 2009-02-18 00:47:43 +01:00
PCI405.h i2c: Move PPC4xx I2C driver into drivers/i2c directory 2010-04-06 08:10:41 +02:00
PCI5441.h nios2: Set CONFIG_SYS_HZ to 1000 all nios2 boards. 2010-04-02 12:28:41 -04:00
PCIPPC2.h Get rid of bogus CONFIG_SYS_BUS_HZ and CONFIG_SYS_CONFIG_BUS_CLK definitions 2010-06-23 23:24:11 +02:00
PCIPPC6.h Get rid of bogus CONFIG_SYS_BUS_HZ and CONFIG_SYS_CONFIG_BUS_CLK definitions 2010-06-23 23:24:11 +02:00
pcm030.h board support patch for phyCORE-MPC5200B-tiny 2009-07-10 23:21:32 +02:00
pcs440ep.h i2c: Move PPC4xx I2C driver into drivers/i2c directory 2010-04-06 08:10:41 +02:00
pcu_e.h ppc: Clean up calling of phy_reset() during init 2009-09-22 23:05:29 +02:00
pdm360ng.h mpc5121: pdm360ng: add coprocessor POST 2010-04-24 22:56:41 +02:00
pdnb3.h common: delete CONFIG_SYS_64BIT_VSPRINTF and CONFIG_SYS_64BIT_STRTOUL 2009-12-08 22:14:07 +01:00
pf5200.h mpc5xxx: Remove all references to MGT5100 2010-03-21 22:44:42 +01:00
PIP405.h i2c: Move PPC4xx I2C driver into drivers/i2c directory 2010-04-06 08:10:41 +02:00
PK1C20.h nios2: Set CONFIG_SYS_HZ to 1000 all nios2 boards. 2010-04-02 12:28:41 -04:00
pleb2.h LAN91C96: Enable NET_MULTI LAN driver 2009-12-13 21:31:26 -08:00
PLU405.h i2c: Move PPC4xx I2C driver into drivers/i2c directory 2010-04-06 08:10:41 +02:00
pm9g45.h add new board pm9g45 2010-06-06 08:36:28 -05:00
PM520.h mpc5xxx: Remove all references to MGT5100 2010-03-21 22:44:42 +01:00
PM826.h Remove legacy NAND and disk on chip references from boards. 2009-07-17 15:03:28 -05:00
PM828.h Remove legacy NAND and disk on chip references from boards. 2009-07-17 15:03:28 -05:00
PM854.h 8xxx: Break out DMA code to a common file 2009-07-01 23:01:51 -05:00
PM856.h 8xxx: Break out DMA code to a common file 2009-07-01 23:01:51 -05:00
pm9261.h pm9261: remove CONFIG_CMD_AUTOSCRIPT 2010-04-30 05:23:22 -05:00
pm9263.h pm9263 converted to at91 soc access 2010-04-30 05:23:26 -05:00
PMC405.h i2c: Move PPC4xx I2C driver into drivers/i2c directory 2010-04-06 08:10:41 +02:00
PMC405DE.h i2c: Move PPC4xx I2C driver into drivers/i2c directory 2010-04-06 08:10:41 +02:00
PMC440.h i2c: Move PPC4xx I2C driver into drivers/i2c directory 2010-04-06 08:10:41 +02:00
PN62.h Add "source" command; prepare removal of "autoscr" command 2009-04-03 22:01:42 +02:00
PPChameleonEVB.h i2c: Move PPC4xx I2C driver into drivers/i2c directory 2010-04-06 08:10:41 +02:00
ppmc7xx.h Get rid of bogus CONFIG_SYS_BUS_HZ and CONFIG_SYS_CONFIG_BUS_CLK definitions 2010-06-23 23:24:11 +02:00
ppmc8260.h Update all board to support new bbmiiphy driver (with multibus support) 2009-10-10 23:16:55 -07:00
purple.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
pxa255_idp.h Convert SMC91111 Ethernet driver to CONFIG_NET_MULTI API 2009-10-04 22:37:03 -07:00
qemu-mips.h Refresh LZMA-lib to v4.65 2009-07-22 09:43:27 +02:00
qong.h MX31: Added support for the Casio COM57H5M10XRC to QONG 2010-05-19 09:15:50 +02:00
QS823.h rename CONFIG_CMD_ENV to CONFIG_CMD_SAVEENV 2009-02-18 00:47:43 +01:00
QS850.h rename CONFIG_CMD_ENV to CONFIG_CMD_SAVEENV 2009-02-18 00:47:43 +01:00
QS860T.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
quad100hd.h Move arch/ppc to arch/powerpc 2010-04-21 23:42:38 +02:00
quantum.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
r2dplus.h Merge branch 'master' of /home/wd/git/u-boot/custodians 2009-07-13 23:37:59 +02:00
R360MPI.h Separate mtdparts command from jffs2 2009-03-20 22:39:14 +01:00
r7780mp.h r7780mp: fix typo in Ethernet chip model number comment. 2009-09-10 23:11:03 +02:00
Rattler.h Update all board to support new bbmiiphy driver (with multibus support) 2009-10-10 23:16:55 -07:00
RBC823.h Remove legacy NAND and disk on chip references from boards. 2009-07-17 15:03:28 -05:00
rd6281a.h mvgbe: support SoCs other than kirkwood 2010-07-12 23:40:31 -07:00
redwood.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
rmu.h rmu board: fix error: 'CONFIG_ENV_SECT_SIZE' undeclared 2009-06-10 00:15:11 +02:00
RPXClassic.h boards: move board_get_enetaddr() into board-specific init 2009-03-20 22:39:12 +01:00
RPXlite.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
RPXlite_DW.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
RPXsuper.h ppc: Clean up calling of phy_reset() during init 2009-09-22 23:05:29 +02:00
RRvision.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
rsdproto.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
rsk7203.h Convert SMC911X Ethernet driver to CONFIG_NET_MULTI API 2009-07-22 22:53:44 -07:00
s5p_goni.h s5pc1xx: Add support for Samsung Goni board 2010-06-14 18:15:20 -05:00
sacsng.h Update all board to support new bbmiiphy driver (with multibus support) 2009-10-10 23:16:55 -07:00
Sandpoint8240.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
Sandpoint8245.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
sbc35_a9g20.h ARM change name of defines for AT91 arm926ejs 2010-03-07 12:36:35 -06:00
sbc405.h i2c: Move PPC4xx I2C driver into drivers/i2c directory 2010-04-06 08:10:41 +02:00
sbc2410x.h Add a unified s3c24x0 header file 2009-11-27 16:26:13 -06:00
sbc8240.h rename CONFIG_CMD_ENV to CONFIG_CMD_SAVEENV 2009-02-18 00:47:43 +01:00
sbc8260.h Update all board to support new bbmiiphy driver (with multibus support) 2009-10-10 23:16:55 -07:00
sbc8349.h mpc83xx: turn on icache in core initialization to improve u-boot boot time 2010-04-22 18:44:56 -05:00
SBC8540.h Update all board to support new bbmiiphy driver (with multibus support) 2009-10-10 23:16:55 -07:00
sbc8548.h sbc8548: reclaim wasted sector in boot flash 2009-09-30 08:29:47 -05:00
sbc8560.h Update all board to support new bbmiiphy driver (with multibus support) 2009-10-10 23:16:55 -07:00
sbc8641d.h common: delete CONFIG_SYS_64BIT_VSPRINTF and CONFIG_SYS_64BIT_STRTOUL 2009-12-08 22:14:07 +01:00
sc3.h Move arch/ppc to arch/powerpc 2010-04-21 23:42:38 +02:00
sc520_cdp.h i386: Fix malloc initialization 2009-12-05 01:02:10 +01:00
sc520_spunk.h i386: Fix malloc initialization 2009-12-05 01:02:10 +01:00
sc520_spunk_rel.h * Code cleanup: 2003-06-27 21:31:46 +00:00
scb9328.h Convert DM9000 driver for CONFIG_NET_MULTI 2009-06-15 00:13:55 -07:00
SCM.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
sequoia.h Adds EHCI definitions to sequoia board configuration file. 2010-01-09 10:27:21 +01:00
sh7763rdp.h sh3/sh4: rename config option TMU_CLK_DIVIDER to CONFIG_SYS_TMU_CLK_DIV 2009-07-08 11:43:16 +09:00
sh7785lcr.h sh3/sh4: rename config option TMU_CLK_DIVIDER to CONFIG_SYS_TMU_CLK_DIV 2009-07-08 11:43:16 +09:00
shannon.h shannon/INFERNO: fix special handling of environment configuration 2010-07-04 23:48:55 +02:00
sheevaplug.h mvgbe: support SoCs other than kirkwood 2010-07-12 23:40:31 -07:00
SIMPC8313.h powerpc: Update configs to properly set FSL_ELBC 2010-07-16 10:55:08 -05:00
SM850.h TQM8xx: enable device tree support on all TQM8xx based boards. 2010-03-12 00:06:07 +01:00
smdk2400.h Add a unified s3c24x0 header file 2009-11-27 16:26:13 -06:00
smdk2410.h Add a unified s3c24x0 header file 2009-11-27 16:26:13 -06:00
smdk6400.h ARM1176: Coexist with other ARM1176 platforms 2010-06-08 10:07:17 -05:00
smdkc100.h SAMSUNG: SMDKC100: Adds ethernet support. 2010-04-03 15:24:26 -05:00
smmaco4.h mpc5xxx: Remove all references to MGT5100 2010-03-21 22:44:42 +01:00
SMN42.h arm: cleanup remaining CONFIG_INIT_CRITICAL 2009-06-12 20:39:48 +02:00
socrates.h 85xx/socrates: Remove NFS support to fit image size. 2010-04-26 22:37:55 -05:00
sorcery.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
spc1920.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
SPD823TS.h ppc: Clean up calling of phy_reset() during init 2009-09-22 23:05:29 +02:00
spear-common.h SPEAr : Support added for SPEAr600 board 2010-01-23 08:15:49 -06:00
spear3xx.h mod change 755 => 644 for multiple files 2010-03-21 22:22:53 +01:00
spear6xx.h mod change 755 => 644 for multiple files 2010-03-21 22:22:53 +01:00
spieval.h mpc5xxx: Remove all references to MGT5100 2010-03-21 22:44:42 +01:00
stxgp3.h ppc: Clean up calling of phy_reset() during init 2009-09-22 23:05:29 +02:00
stxssa.h rename CONFIG_CMD_ENV to CONFIG_CMD_SAVEENV 2009-02-18 00:47:43 +01:00
stxxtc.h FDT: remove obsolete OF_CPU and OF_SOC macros. 2009-09-22 22:59:27 +02:00
suen3.h arm: add support for the suen3 board from keymile 2010-03-07 12:36:36 -06:00
svm_sc8xx.h Remove legacy NAND and disk on chip references from boards. 2009-07-17 15:03:28 -05:00
SX1.h arm925t: Fix CONFIG_SYS_HZ to 1000 2009-04-29 21:39:46 +02:00
SXNI855T.h Remove legacy NAND and disk on chip references from boards. 2009-07-17 15:03:28 -05:00
t3corp.h ppc4xx: Add T3COPR board support (PPC460GT based) 2010-07-01 10:26:30 +02:00
taihu.h i2c: Update references to individual i2c commands 2009-06-12 20:39:46 +02:00
taishan.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
TASREG.h ColdFire: Cache update for all platforms 2010-03-24 11:09:37 -05:00
tb0229.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
TB5200.h mpc5xxx: Remove all references to MGT5100 2010-03-21 22:44:42 +01:00
tcm-bf518.h Blackfin: unify default I2C settings for ADI boards 2010-07-13 17:50:52 -04:00
tcm-bf537.h Blackfin: unify default I2C settings for ADI boards 2010-07-13 17:50:52 -04:00
TK885D.h TQM8xx: enable device tree support on all TQM8xx based boards. 2010-03-12 00:06:07 +01:00
tnetv107x_evm.h TI: TNETV107X EVM initial support 2010-06-08 10:07:17 -05:00
tny_a9260.h ARM change name of defines for AT91 arm926ejs 2010-03-07 12:36:35 -06:00
TOP860.h Add "source" command; prepare removal of "autoscr" command 2009-04-03 22:01:42 +02:00
TOP5200.h net: removed board-specific CONFIGs from MPC5xxx FEC driver 2009-02-09 23:01:40 -08:00
Total5200.h mpc5xxx: Remove all references to MGT5100 2010-03-21 22:44:42 +01:00
TQM85xx.h common: delete CONFIG_SYS_64BIT_VSPRINTF and CONFIG_SYS_64BIT_STRTOUL 2009-12-08 22:14:07 +01:00
TQM823L.h TQM8xx: enable device tree support on all TQM8xx based boards. 2010-03-12 00:06:07 +01:00
TQM823M.h TQM8xx: enable device tree support on all TQM8xx based boards. 2010-03-12 00:06:07 +01:00
TQM834x.h mpc83xx: turn on icache in core initialization to improve u-boot boot time 2010-04-22 18:44:56 -05:00
TQM850L.h TQM8xx: enable device tree support on all TQM8xx based boards. 2010-03-12 00:06:07 +01:00
TQM850M.h TQM8xx: enable device tree support on all TQM8xx based boards. 2010-03-12 00:06:07 +01:00
TQM855L.h TQM8xx: enable device tree support on all TQM8xx based boards. 2010-03-12 00:06:07 +01:00
TQM855M.h TQM8xx: enable device tree support on all TQM8xx based boards. 2010-03-12 00:06:07 +01:00
TQM860L.h TQM8xx: enable device tree support on all TQM8xx based boards. 2010-03-12 00:06:07 +01:00
TQM860M.h TQM8xx: enable device tree support on all TQM8xx based boards. 2010-03-12 00:06:07 +01:00
TQM862L.h TQM8xx: enable device tree support on all TQM8xx based boards. 2010-03-12 00:06:07 +01:00
TQM862M.h TQM8xx: enable device tree support on all TQM8xx based boards. 2010-03-12 00:06:07 +01:00
TQM866M.h TQM8xx: enable device tree support on all TQM8xx based boards. 2010-03-12 00:06:07 +01:00
TQM885D.h TQM8xx: enable device tree support on all TQM8xx based boards. 2010-03-12 00:06:07 +01:00
TQM5200.h mpc5xxx: Remove all references to MGT5100 2010-03-21 22:44:42 +01:00
TQM8260.h TQM8260: fix locations of kernel and ramdisk images in flash 2009-02-17 10:26:38 +01:00
TQM8272.h common: delete CONFIG_SYS_64BIT_VSPRINTF and CONFIG_SYS_64BIT_STRTOUL 2009-12-08 22:14:07 +01:00
trab.h Add a unified s3c24x0 header file 2009-11-27 16:26:13 -06:00
trizepsiv.h xscale: add support for the polaris board 2009-07-06 21:52:58 +02:00
tx25.h Add support for KARO TX25 board 2010-03-07 12:36:36 -06:00
uc100.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
uc101.h mpc5200, mucmc52, uc101: config cleanup 2009-09-25 01:19:17 +02:00
utx8245.h rename CONFIG_CMD_ENV to CONFIG_CMD_SAVEENV 2009-02-18 00:47:43 +01:00
v5fx30teval.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
v37.h Separate mtdparts command from jffs2 2009-03-20 22:39:14 +01:00
v38b.h mpc5xxx: Remove all references to MGT5100 2010-03-21 22:44:42 +01:00
VCMA9.h Add a unified s3c24x0 header file 2009-11-27 16:26:13 -06:00
vct.h common: delete CONFIG_SYS_64BIT_VSPRINTF and CONFIG_SYS_64BIT_STRTOUL 2009-12-08 22:14:07 +01:00
ve8313.h 83xx: add support for ve8313 board 2010-07-09 16:10:44 -05:00
versatile.h Convert SMC91111 Ethernet driver to CONFIG_NET_MULTI API 2009-10-04 22:37:03 -07:00
virtlab2.h TQM8xx: enable device tree support on all TQM8xx based boards. 2010-03-12 00:06:07 +01:00
vme8349.h mpc83xx: turn on icache in core initialization to improve u-boot boot time 2010-04-22 18:44:56 -05:00
VOH405.h i2c: Move PPC4xx I2C driver into drivers/i2c directory 2010-04-06 08:10:41 +02:00
voiceblue.h VoiceBlue: limit line lenght to 80 characters 2010-03-07 12:36:35 -06:00
VOM405.h i2c: Move PPC4xx I2C driver into drivers/i2c directory 2010-04-06 08:10:41 +02:00
VoVPN-GW.h Update all board to support new bbmiiphy driver (with multibus support) 2009-10-10 23:16:55 -07:00
W7OLMC.h i2c: Move PPC4xx I2C driver into drivers/i2c directory 2010-04-06 08:10:41 +02:00
W7OLMG.h i2c: Move PPC4xx I2C driver into drivers/i2c directory 2010-04-06 08:10:41 +02:00
walnut.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
wepep250.h pxa: move serial driver to drivers/serial 2009-06-12 20:39:52 +02:00
WUH405.h i2c: Move PPC4xx I2C driver into drivers/i2c directory 2010-04-06 08:10:41 +02:00
xaeniax.h Convert SMC91111 Ethernet driver to CONFIG_NET_MULTI API 2009-10-04 22:37:03 -07:00
xilinx-ppc.h mtd: MTD related config header changes (mtdparts command) 2009-06-12 20:45:47 +02:00
xilinx-ppc405-generic.h ppc4xx: Generic architecture for xilinx ppc405(v3) 2008-10-24 17:26:09 +02:00
xilinx-ppc405.h ppc4xx: Merge xilinx-ppc440 and xilinx-ppc405 cfg 2008-10-31 10:31:02 +01:00
xilinx-ppc440-generic.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
xilinx-ppc440.h ppc4xx: Merge xilinx-ppc440 and xilinx-ppc405 cfg 2008-10-31 10:31:02 +01:00
xm250.h Convert SMC91111 Ethernet driver to CONFIG_NET_MULTI API 2009-10-04 22:37:03 -07:00
XPEDITE1000.h i2c: Move PPC4xx I2C driver into drivers/i2c directory 2010-04-06 08:10:41 +02:00
XPEDITE5170.h common: delete CONFIG_SYS_64BIT_VSPRINTF and CONFIG_SYS_64BIT_STRTOUL 2009-12-08 22:14:07 +01:00
XPEDITE5200.h common: delete CONFIG_SYS_64BIT_VSPRINTF and CONFIG_SYS_64BIT_STRTOUL 2009-12-08 22:14:07 +01:00
XPEDITE5370.h powerpc: Update configs to properly set FSL_ELBC 2010-07-16 10:55:08 -05:00
xsengine.h Convert SMC91111 Ethernet driver to CONFIG_NET_MULTI API 2009-10-04 22:37:03 -07:00
yosemite.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
yucca.h ppc4xx: Add option for PPC440SPe ports without old Rev. A support 2010-04-14 10:27:39 +02:00
Yukon8220.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
zeus.h i2c: Move PPC4xx I2C driver into drivers/i2c directory 2010-04-06 08:10:41 +02:00
ZPC1900.h Update all board to support new bbmiiphy driver (with multibus support) 2009-10-10 23:16:55 -07:00
ZUMA.h Get rid of bogus CONFIG_SYS_BUS_HZ and CONFIG_SYS_CONFIG_BUS_CLK definitions 2010-06-23 23:24:11 +02:00
zylonite.h common: delete CONFIG_SYS_64BIT_VSPRINTF and CONFIG_SYS_64BIT_STRTOUL 2009-12-08 22:14:07 +01:00