Commit graph

23724 commits

Author SHA1 Message Date
Simon Glass
3ac0f50412 image: Drop IMAGE_OF_SYSTEM_SETUP
This is not needed with Kconfig, since we can use IS_ENABLED() easily
enough. Drop it.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2021-10-08 15:53:26 -04:00
Simon Glass
30ba282865 image: Drop IMAGE_OF_BOARD_SETUP
This is not needed with Kconfig, since we can use IS_ENABLED() easily
enough. Drop it.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2021-10-08 15:53:26 -04:00
Simon Glass
806d1ff37b image: Drop IMAGE_BOOT_GET_CMDLINE
This is not needed with Kconfig, since we can use IS_ENABLED() easily
enough and the board code is now in a separate file. Update the only place
where this is used and drop it.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2021-10-08 15:53:26 -04:00
Simon Glass
2bbed3ff8c image: Use Kconfig to enable FIT_RSASSA_PSS on host
Add a host Kconfig for FIT_RSASSA_PSS. With this we can use
CONFIG_IS_ENABLED(FIT_RSASSA_PSS) directly in the host build, so drop the
forcing of this in the image.h header.

Drop the #ifdef around padding_pss_verify() too since it is not needed.
Use the compiler to check the config where possible, instead of the
preprocessor.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2021-10-08 15:53:26 -04:00
Simon Glass
e059157f0d image: Use Kconfig to enable CONFIG_FIT_VERBOSE on host
Add a host Kconfig for FIT_VERBOSE. With this we can use
CONFIG_IS_ENABLED(FIT_VERBOSE) directly in the tools build, so drop the
forcing of this in the image.h header.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2021-10-08 15:53:26 -04:00
Simon Glass
0c303f9a66 image: Drop IMAGE_ENABLE_OF_LIBFDT
Add a host Kconfig for OF_LIBFDT. With this we can use
CONFIG_IS_ENABLED(OF_LIBFDT) directly in the tools build, so drop the
unnecessary indirection.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2021-10-08 15:53:26 -04:00
Simon Glass
bf371b4cf5 image: Drop IMAGE_ENABLE_FIT
Make use of the host Kconfig for FIT. With this we can use
CONFIG_IS_ENABLED(FIT) directly in the host build, so drop the unnecessary
indirection.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2021-10-08 15:53:26 -04:00
Simon Glass
2c21256b27 hash: Use Kconfig to enable hashing in host tools and SPL
At present when building host tools, we force CONFIG_SHAxxx to be enabled
regardless of the board Kconfig setting. This is done in the image.h
header file.

For SPL we currently just assume the algorithm is desired if U-Boot proper
enables it.

Clean this up by adding new Kconfig options to enable hashing on the host,
relying on CONFIG_IS_ENABLED() to deal with the different builds.

Add new SPL Kconfigs for hardware-accelerated hashing, to maintain the
current settings.

This allows us to drop the image.h code and the I_WANT_MD5 hack.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2021-10-08 15:53:26 -04:00
Simon Glass
5500a408dd kconfig: Add tools support to CONFIG_IS_ENABLED()
At present we must separately test for the host build for many options,
since we force them to be enabled. For example, CONFIG_FIT is always
enabled in the host tools, even if CONFIG_FIT is not enabled by the
board itself.

It would be more convenient if we could use, for example,
CONFIG_IS_ENABLED(FIT) and get CONFIG_HOST_FIT, when building for the
host. Add support for this.

With this and the tools_build() function, we should be able to remove all
the #ifdefs currently needed in code that is build by tools and targets.

This will be even nicer when we move to using CONFIG(xxx) everywhere,
since all the #ifdef and IS_ENABLED/CONFIG_IS_ENABLED stuff will go away.

Signed-off-by: Simon Glass <sjg@chromium.org>
Suggested-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk> # b4f73886
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2021-10-08 15:53:26 -04:00
Simon Glass
c9d6b5b5dc compiler: Rename host_build() to tools_build()
With the new TOOLS_LIBCRYPTO and some other changes, it seems that we are
heading towards calling this a tools build rather than a host build,
although of course it does happen on the host.

I cannot think of anything built by the host which cannot be described as
a tool, so rename this function.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2021-10-08 15:53:26 -04:00
Simon Glass
c5a68d29e3 image: Avoid #ifdefs for manual relocation
Add a macro to handle manually relocating a pointer. Update the iamge code
to use this to avoid needing #ifdefs.

This also fixes a bug where the 'done' flag was not set.

Signed-off-by: Simon Glass <sjg@chromium.org>
2021-10-08 15:53:26 -04:00
Simon Glass
2ac00c0505 image: Create a function to do manual relocation
Rather than adding an #ifdef and open-coding this calculation, add a
helper function to handle it. Use this in the image code.

Signed-off-by: Simon Glass <sjg@chromium.org>
2021-10-08 15:53:26 -04:00
Simon Glass
5a4f10d71b gzip: Avoid use of u64
The gzip API uses the u64 type in it, which is not available in the host
build. This makes it impossible to include the header file.

We could make this type available, but it seems unnecessary. Limiting the
compression size to that of the 'unsigned long' type seems good enough. On
32-bit machines the limit then becomes 4GB, which likely exceeds available
RAM anyway, therefore it should be sufficient. On 64-bit machines this is
effectively u64 anyway.

Update the header file and implementation to use 'ulong' instead of 'u64'.

Add a definition of u32 for the cases that seem to need exactly that
length. This should be safe enough.

Signed-off-by: Simon Glass <sjg@chromium.org>
2021-10-08 15:53:26 -04:00
Simon Glass
94d0a2efc0 zstd: Create a function for use from U-Boot
The existing zstd API requires the same sequence of calls to perform its
task. Create a helper for U-Boot, to avoid code duplication, as is done
with other compression algorithms. Make use of of this from the image
code.

Note that the zstd code lacks a test in test/compression.c and this should
be added by the maintainer.

Signed-off-by: Simon Glass <sjg@chromium.org>
2021-10-08 15:53:26 -04:00
Simon Glass
c45b7920db compiler: Add a comment to host_build()
This function should have a comment explaining what it does. Add one.

Signed-off-by: Simon Glass <sjg@chromium.org>
2021-10-08 15:53:26 -04:00
Simon Glass
67bc59df05 Add support for an owned buffer
When passing a data buffer back from a function, it is not always clear
who owns the buffer, i.e. who is responsible for freeing the memory used.
An example of this is where multiple files are decompressed from the
firmware image, using a temporary buffer for reading (since the
compressed data has to live somewhere) and producing a temporary or
permanent buffer with the resuilts.

Where the firmware image can be memory-mapped, as on x86, the compressed
data does not need to be buffered, but the complexity of having a buffer
which is either allocated or not, makes the code hard to understand.

Introduce a new 'abuf' which supports simple buffer operations:

- encapsulating a buffer and its size
- either allocated with malloc() or not
- able to be reliably freed if necessary
- able to be converted to an allocated buffer if needed

This simple API makes it easier to deal with allocated and memory-mapped
buffers.

Signed-off-by: Simon Glass <sjg@chromium.org>
2021-10-08 15:53:26 -04:00
Simon Glass
930c887e0f lib: Add memdup()
Add a function to duplicate a memory region, a little like strdup().

Signed-off-by: Simon Glass <sjg@chromium.org>
2021-10-08 15:53:26 -04:00
Pali Rohár
1d7ad68559 arm: a37xx: pci: Handle propagation of CRSSVE bit from PCIe Root Port
Now that PCI Bridge (PCIe Root Port) for Aardvark is emulated in U-Boot,
add support for handling and propagation of CRSSVE bit.

When CRSSVE bit is unset (default), driver has to reissue config
read/write request on CRS response.

CRSSVE bit is supported only when CRSVIS bit is provided in read-only
Root Capabilities register. So manually inject this CRSVIS bit into read
response for that register.

Signed-off-by: Pali Rohár <pali@kernel.org>
Reviewed-by: Marek Behún <marek.behun@nic.cz>
Reviewed-by: Stefan Roese <sr@denx.de>
2021-10-08 08:37:55 +02:00
Patrick Delaunay
b0e763b7b8 pm9263: Remove unused CONFIG_USER_LOWLEVEL_INIT
Remove the latest reference of CONFIG_USER_LOWLEVEL_INIT in code

Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
2021-10-08 08:31:24 +02:00
Patrick Delaunay
c7f85e1f61 stm32f429: move CONFIG_BOOTCOMMAND in defconfig
Move CONFIG_BOOTCOMMAND defined in Kconfig in the board defconfig.

Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
2021-10-08 08:25:57 +02:00
Patrick Delaunay
454994727d configs: Move some usb config in defconfig
Using the tools moveconfig.py to move the following config in the
defconfig files:
 CONFIG_USB_HOST_ETHER
 CONFIG_USB_ETHER_ASIX
 CONFIG_USB_ETHER_MCS7830
 CONFIG_USB_ETHER_SMSC95XX

These option are already migrated since the commit f58ad98a62 ("usb: net:
migrate USB Ethernet adapters to Kconfig") and the commit ae3584498b
("usb: net: migrate CONFIG_USB_HOST_ETHER to Kconfig").

Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Reviewed-by: Mark Kettenis <kettenis@openbsd.org>
Reviewed-by: Ian Ray <ian.ray@ge.com>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
2021-10-08 08:25:12 +02:00
Patrick Delaunay
cc30ea584e Convert CONFIG_STM32_FLASH to Kconfig
This converts the CONFIG_STM32_FLASH to Kconfig by using
tools/moveconfig.py

Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
2021-10-08 08:24:20 +02:00
Marek Vasut
2d0808161b Revert "configs: stm32mp1: only support SD card after NOR in bootcmd_stm32mp"
This reverts commit d5d726d3cc,
which breaks boards which ship with multiple SD/eMMC sockets.

This stm32mp1.h config is not used only by the ST reference
boards, but all the other STM32MP1 based boards in U-Boot, so
changes to this stm32mp1.h cannot break the other boards.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Patrice Chotard <patrice.chotard@foss.st.com>
Cc: Patrick Delaunay <patrick.delaunay@foss.st.com>
Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
2021-10-08 08:22:43 +02:00
Patrick Delaunay
b703dcb0fe arm: stm32: Disable ATAGs support
These platforms never had to support an ATAGs-based Linux Kernel, so
remove the options.

Cc: Marek Vasut <marex@denx.de>
Signed-off-by: Tom Rini <trini@konsulko.com>
Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
Tested-by: Patrice Chotard <patrice.chotard@foss.st.com>
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2021-10-08 08:15:39 +02:00
Oleksandr Suvorov
fa0223a759 mmc: sdhci-esdhc-imx: Add HS400 support for iMX7ULP
Import HS400 support for iMX7ULP B0 from the Linux kernel:

2eaf5a533afd ("mmc: sdhci-esdhc-imx: Add HS400 support for iMX7ULP")

According to IC suggest, need to clear the STROBE_DLL_CTRL_RESET
before any setting of STROBE_DLL_CTRL register.

USDHC has register bits(bit[27~20] of register STROBE_DLL_CTRL)
for slave sel value. If this register bits value is 0,  it needs
256 ref_clk cycles to update slave sel value. IC suggest to set
bit[27~20] to 0x4, it only need 4 ref_clk cycle to update slave
sel value. This will short the lock time of slave.

i.MX7ULP B0 will need more time to lock the REF and SLV, so change
to add 5us delay.

Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@foundries.io>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
Reviewed-by: Igor Opaniuk <igor.opaniuk@foundries.io>
2021-10-07 21:58:49 +02:00
Fabio Estevam
84482e4f4e smegw01: Pass 'mmcpart' to the kernel command line
When using SWUpdate, it is necessary to toggle between partitions.

Use the 'mmcpart' environment variable to accomplish that.

Signed-off-by: Fabio Estevam <festevam@denx.de>
2021-10-07 17:45:00 +02:00
Frieder Schrempf
9cab87f184 imx: imx8mm: Add support for Kontron Electronics SL/BL i.MX8M-Mini boards (N801x)
The Kontron SoM-Line i.MX8MM (N801x) by Kontron Electronics GmbH is a SoM
module with an i.MX8M-Mini SoC, 1/2/4 GB LPDDR4 RAM, SPI NOR, eMMC and PMIC.

The matching evaluation boards (Board-Line) have 2 Ethernets, USB 2.0, HDMI/LVDS,
SD card, CAN, RS485 and much more.

Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
Reviewed-by: Stefano Babic <sbabic@denx.de>
Tested-by: Heiko Thiery <heiko.thiery@gmail.com>
2021-10-07 17:31:58 +02:00
Tim Harvey
d75ebf3482 imx: ventana: fix splash logo drawing
After mxc_ipuv3 DM_VIDEO conversion showing splash image
doesn't work. Fix this by adding new requirements:
- splashimage env variable.
- CONFIG_SPLASH_SCREEN
- CONFIG_CMD_BMP

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2021-10-07 16:53:50 +02:00
Frieder Schrempf
e6f48aad15 imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx)
This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by
Kontron Electronics GmbH.

Currently there are the following SoM flavors (SoM-Line):
  * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND
  * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND
  * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND

And the according evaluation boards (Board-Line):
  * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ...
  * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ...
  * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ...

Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config
options at compile-time. Though the differences are so minor, that for
the scope of these SoMs we just use a single defconfig that is compatible
with both SoCs.

Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
Reviewed-by: Stefano Babic <sbabic@denx.de>
2021-10-07 16:53:50 +02:00
Matthias Schiffer
bc959905df imx: mx7: spl: fix CONFIG_SPL_MAX_SIZE definition
The CONFIG_SPL_MAX_SIZE definition did not account for all areas that
are used by the boot ROM according to the manual, causing boot failures
due to truncated SPL images when actually hitting this limit.

Signed-off-by: Matthias Schiffer <matthias.schiffer@ew.tq-group.com>
2021-10-07 16:53:50 +02:00
Oleksandr Suvorov
32139c25e4 imx8qm_mek: Increase CONFIG_SYS_BOOTM_LEN to 64MB
The BSP platform LmP supports the board NXP iMX8QM MEK. The
kernel size in LmP exceeds 32Mb. Increase the maximum size
of an uncompressed kernel to fix the following error:
    Uncompressing Kernel Image
    Error: inflate() returned -5
    Image too large: increase CONFIG_SYS_BOOTM_LEN
    Must RESET board to recover

Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@foundries.io>
2021-10-07 16:53:50 +02:00
Oleksandr Suvorov
13586e4668 imx8mq_evk: Increase CONFIG_SYS_BOOTM_LEN to 64MB
The BSP platform LmP supports the board NXP iMX8M Plus EVK. The
kernel size in LmP exceeds 32Mb. Increase the maximum size
of an uncompressed kernel to fix the following error:
    Uncompressing Kernel Image
    Error: inflate() returned -5
    Image too large: increase CONFIG_SYS_BOOTM_LEN
    Must RESET board to recover

Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@foundries.io>
2021-10-07 16:53:50 +02:00
Oleksandr Suvorov
80c9cb3cb5 imx8mm_evk: Increase CONFIG_SYS_BOOTM_LEN to 64MB
The BSP platform LmP supports the board NXP iMX8M Mini EVK. The
kernel size in LmP exceeds 32Mb. Increase the maximum size
of an uncompressed kernel to fix the following error:
    Uncompressing Kernel Image
    Error: inflate() returned -5
    Image too large: increase CONFIG_SYS_BOOTM_LEN
    Must RESET board to recover

Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@foundries.io>
2021-10-07 16:53:50 +02:00
Heiko Schocher
884ba50a07 spl_fit. add hook to make fixes after fit header is loaded
add hook function spl_load_simple_fit_fix_load()
which is called after fit image header is loaded.

Signed-off-by: Heiko Schocher <hs@denx.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
2021-10-07 16:53:50 +02:00
Vyacheslav Bocharov
15eda54676 ARM: amlogic: add JetHub common config header
JetHub devices uses its own boot sequence with "rescue" button

Signed-off-by: Vyacheslav Bocharov <adeep@lexina.in>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2021-10-07 13:45:35 +02:00
Neil Armstrong
d565a35dbd distro_bootcmd: run pci enum for scsi_boot just like it is done for nvme_boot
The SCSI device can be a PCIe adapter, so run pcie enum if enabled.

Signed-off-by: Mark Kettenis <kettenis@openbsd.org>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2021-10-07 10:14:50 +02:00
Neil Armstrong
f485e9dfa7 configs: meson64: add SCSI boot target
Add SCSI target to be able to boot from the SATA disks on the Odroid HC4 using
an on-board AHCI PCIe controller.

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Mark Kettenis <kettenis@openbsd.org>
2021-10-07 10:14:50 +02:00
Neil Armstrong
2e8d47c641 ARM: meson: Sync Amlogic DT from Linux 5.14
Import Amlogic DT changes from Linux commit 7d2a07b76933 ("Linux 5.14"),
dt-bindings clock changes and new meson-g12b-gsking-x.dts,
meson-sm1-bananapi-m5 & odroid-hc4 boards.

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2021-10-07 10:14:50 +02:00
Tom Rini
6115f1c4fe Convert CONFIG_NAND_OMAP_ECCSCHEME to Kconfig
The values of CONFIG_NAND_OMAP_ECCSCHEME map to the enum in
include/linux/mtd/omap_gpmc.h for valid ECC schemes.  Make which one we
will use be a choice statement, enumerating the ones which we have
implemented.

Signed-off-by: Tom Rini <trini@konsulko.com>
2021-10-06 09:16:24 -04:00
Tom Rini
871fd508fc Convert CONFIG_SYS_NAND_U_BOOT_LOCATIONS et al to Kconfig
This converts the following to Kconfig:
   CONFIG_SYS_NAND_U_BOOT_LOCATIONS
   CONFIG_SYS_NAND_U_BOOT_OFFS

Signed-off-by: Tom Rini <trini@konsulko.com>
2021-10-06 09:16:24 -04:00
Tom Rini
53f06134ed Convert CONFIG_NAND_FSL_ELBC et al to Kconfig
This converts the following to Kconfig:
   CONFIG_NAND_FSL_ELBC
   CONFIG_NAND_FSL_IFC

Note that a number of PowerPC platforms had previously enabled
CONFIG_NAND_FSL_ELBC without CONFIG_MTD_RAW_NAND, and now they no longer
enable the option, reducing the size of a few functions.

Signed-off-by: Tom Rini <trini@konsulko.com>
2021-10-06 09:16:24 -04:00
Tom Rini
b2e25afabd Convert CONFIG_SYS_NAND_MAX_CHIPS to Kconfig
This converts the following to Kconfig:
   CONFIG_SYS_NAND_MAX_CHIPS

Signed-off-by: Tom Rini <trini@konsulko.com>
2021-10-06 09:16:24 -04:00
Tom Rini
1cefed1e39 nand.h: Cleanup linux/mtd/rawnand.h usage
We only include <linux/mtd/rawnand.h> in <nand.h> for the forward
declaration of struct nand_chip, so do that directly.  Then, include
<linux/mtd/rawnand.h> where required directly.

Signed-off-by: Tom Rini <trini@konsulko.com>
2021-10-06 09:16:23 -04:00
Tom Rini
c0ad62c5f7 Convert CONFIG_SYS_NAND_ONFI_DETECTION to Kconfig
This converts the following to Kconfig:
   CONFIG_SYS_NAND_ONFI_DETECTION

Signed-off-by: Tom Rini <trini@konsulko.com>
2021-10-06 09:16:23 -04:00
Tom Rini
4884d829d7 Convert CONFIG_SYS_NAND_5_ADDR_CYCLE to Kconfig
This converts the following to Kconfig:
   CONFIG_SYS_NAND_5_ADDR_CYCLE

Signed-off-by: Tom Rini <trini@konsulko.com>
2021-10-06 09:16:23 -04:00
Tom Rini
9d9f59dd0a Convert CONFIG_SYS_NAND_BAD_BLOCK_POS to Kconfig
This converts the following to Kconfig:
   CONFIG_SYS_NAND_BAD_BLOCK_POS

In order to do this, introduce a choice for HAS_LARGE/SMALL_BADBLOCK_POS
as those are the only valid values.  Use LARGE as the default as no
in-tree boards use SMALL, but it is possible.

Signed-off-by: Tom Rini <trini@konsulko.com>
2021-10-06 09:16:23 -04:00
Tom Rini
8db73ec106 Convert CONFIG_SYS_NAND_PAGE_COUNT to Kconfig
This converts the following to Kconfig:
   CONFIG_SYS_NAND_PAGE_COUNT

Signed-off-by: Tom Rini <trini@konsulko.com>
2021-10-06 09:16:23 -04:00
Tom Rini
a0de075392 Convert CONFIG_SPL_NAND_LOAD et al to Kconfig
This converts the following to Kconfig:
   CONFIG_SPL_NAND_LOAD
   CONFIG_SYS_NAND_BLOCK_SIZE
   CONFIG_SYS_NAND_PAGE_SIZE
   CONFIG_SYS_NAND_OOBSIZE

Signed-off-by: Tom Rini <trini@konsulko.com>
2021-10-06 09:16:23 -04:00
Tom Rini
ccdc7cfbdc Convert CONFIG_NAND_LPC32XX_MLC to Kconfig
This converts the following to Kconfig:
   CONFIG_NAND_LPC32XX_MLC

Signed-off-by: Tom Rini <trini@konsulko.com>
2021-10-06 09:15:14 -04:00
Tom Rini
d73b9e67ed m53menlo: Switch to deriving CONFIG_SYS_NAND_PAGE_COUNT
Typically platforms will define CONFIG_SYS_NAND_PAGE_COUNT based on
CONFIG_SYS_NAND_BLOCK_SIZE / CONFIG_SYS_NAND_PAGE_SIZE.  Switch to this
in preparation for migrating CONFIG_SYS_NAND namespace to Kconfig.

Cc: Marek Vasut <marex@denx.de>
Cc: Olaf Mandel <o.mandel@menlosystems.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
2021-10-06 09:15:14 -04:00