Commit graph

22 commits

Author SHA1 Message Date
Simon Glass
779653b0cb x86: Drop all the old pin configuration code
We don't need this anymore - we can use device tree and the new pinconfig
driver instead.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2016-03-17 10:27:25 +08:00
Simon Glass
9ed781a6ff x86: ivybridge: Move northbridge and PCH init into drivers
Instead of calling the northbridge and PCH init from bd82x6x_init_extra()
when the PCI bus is probed, call it from the respective drivers. Also drop
the Northbridge init as it has no effect. The registers it touches appear to
be read-only.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2016-01-24 12:08:17 +08:00
Bin Meng
fa331fad1e x86: ivybridge: Do not require HAVE_INTEL_ME
Do not set HAVE_INTEL_ME by default as for some cases Intel ME
firmware even does not reside on the same SPI flash as U-Boot.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Acked-by: Simon Glass <sjg@chromium.org>
Tested-by: Simon Glass <sjg@chromium.org>
2016-01-13 12:20:15 +08:00
Bin Meng
789fa275b3 x86: Remove HAVE_ACPI_RESUME
These are currently dead codes. Until we have complete ACPI support,
we don't know if it works or not. Remove to avoid confusion.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Acked-by: Simon Glass <sjg@chromium.org>
Tested-by: Simon Glass <sjg@chromium.org>
2015-12-09 17:44:56 +08:00
Bin Meng
d475d59020 x86: Remove CPU_INTEL_SOCKET_RPGA989
This Kconfig option name indicates it has something to do with cpu
socket, however it is actually not the case. Remove it and move
options inside it to NORTHBRIDGE_INTEL_IVYBRIDGE.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Acked-by: Simon Glass <sjg@chromium.org>
Tested-by: Simon Glass <sjg@chromium.org>
2015-12-09 17:44:54 +08:00
Bin Meng
efe2d80cca x86: Clean up ivybridge/chrome Kconfig options
There are some options which are never used, and also some options
which are selected by others but have never been a Kconfg option.
Clean these up.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Acked-by: Simon Glass <sjg@chromium.org>
Tested-by: Simon Glass <sjg@chromium.org>
2015-12-09 17:44:52 +08:00
Bin Meng
9e3a7c9bac x86: Remove MARK_GRAPHICS_MEM_WRCOMB
MARK_GRAPHICS_MEM_WRCOMB is not referenced anywhere in the code,
hence remove it.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Acked-by: Simon Glass <sjg@chromium.org>
2015-07-14 18:03:18 -06:00
Bin Meng
99556d7deb x86: Kconfig: Remove deprecated CONFIG_SYS_EXTRA_OPTIONS
Currently all x86 boards still use CONFIG_SYS_EXTRA_OPTIONS to define
the text base address. Since it is deprecated, just remove it and use
CONFIG_SYS_TEXT_BASE directly.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Acked-by: Simon Glass <sjg@chromium.org>
2015-04-29 18:51:50 -06:00
Simon Glass
a5dec5a5c4 x86: cros_ec: Drop unnecessary init
Since driver model will probe the EC when it is first used, we do not
need to init it explicitly.

Signed-off-by: Simon Glass <sjg@chromium.org>
2015-04-18 11:11:15 -06:00
Simon Glass
801f4f1bbc dm: x86: pci: Convert coreboot to use driver model for pci
Move coreboot-x86 over to driver model for PCI.

Signed-off-by: Simon Glass <sjg@chromium.org>
2015-04-18 11:11:09 -06:00
Simon Glass
2d934e5703 x86: Rename MMCONF_BASE_ADDRESS and make it common across x86
This setting will be used by more than just ivybridge so make it common.

Also rename it to PCIE_ECAM_BASE which is a more descriptive name.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2015-02-05 22:16:43 -07:00
Bin Meng
24ef04280c x86: Move CONFIG_SYS_CAR_xxx to Kconfig
Move CONFIG_SYS_CAR_ADDR and CONFIG_SYS_CAR_SIZE to Kconfig so that
we don't need them in the board configuration file thus the same
board configuratoin file can be used to build both coreboot version
and bare version.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Acked-by: Simon Glass <sjg@chromium.org>
2015-01-13 07:25:04 -08:00
Bin Meng
8cb20ccc34 x86: Move CONFIG_X86_RESET_VECTOR and CONFIG_SYS_X86_START16 to Kconfig
Convert CONFIG_X86_RESET_VECTOR and CONFIG_SYS_X86_START16 to Kconfig
options so that we can remove them from board configuration file.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Acked-by: Simon Glass <sjg@chromium.org>
2015-01-13 07:25:03 -08:00
Bin Meng
b71eec3129 x86: ich6-gpio: Add Intel Tunnel Creek GPIO support
Intel Tunnel Creek GPIO register block is compatible with current
ich6-gpio driver, except the offset and content of GPIO block base
address register in the LPC PCI configuration space are different.

Use u16 instead of u32 to store the 16-bit I/O address of the GPIO
registers so that it could support both Ivybridge and Tunnel Creek.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Acked-by: Simon Glass <sjg@chromium.org>
2014-12-18 17:26:06 -07:00
Bin Meng
2795573a8c x86: ich6-gpio: Move setup_pch_gpios() to board support codes
Movie setup_pch_gpios() in the ich6-gpio driver to the board support
codes, so that the driver does not need to know any platform specific
stuff (ie: include the platform specifc chipset header file).

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Acked-by: Simon Glass <sjg@chromium.org>
2014-12-13 22:32:04 -07:00
Bin Meng
64542f4616 x86: Make ROM_SIZE configurable in Kconfig
Currently the ROM_SIZE is hardcoded to 8MB in arch/x86/Kconfig. This
will not be the case when adding additional board support. Hence we
make ROM_SIZE configurable (512KB/1MB/2MB/4MB/8MB/16MB) and have the
board Kconfig file select the default ROM_SIZE.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Acked-by: Simon Glass <sjg@chromium.org>
2014-12-13 22:32:03 -07:00
Simon Glass
22e131ca00 x86: chromebook_link: Enable the Chrome OS EC
Enable the Chrome OS EC so that it can be used from U-Boot.

Signed-off-by: Simon Glass <sjg@chromium.org>
2014-11-25 07:11:17 -07:00
Simon Glass
65990d5680 x86: Remove board_early_init_r()
This function is not needed. Remove it to improve the generic init sequence
slightly.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2014-11-25 06:33:59 -07:00
Simon Glass
437c2b7cd0 x86: chromebook_link: Enable GPIO support
Enable GPIO support and provide the required GPIO setup information to
the driver.

Signed-off-by: Simon Glass <sjg@chromium.org>
2014-11-21 07:34:15 +01:00
Simon Glass
70a09c6c3d x86: chromebook_link: Implement CAR support (cache as RAM)
Add support for CAR so that we have memory to use prior to DRAM init.
On link there is a total of 128KB of CAR available, although some is
used for the memory reference code.

Signed-off-by: Simon Glass <sjg@chromium.org>
2014-11-21 07:34:11 +01:00
Simon Glass
d1cd045982 x86: Emit post codes in startup code for Chromebooks
On x86 it is common to use 'post codes' which are 8-bit hex values emitted
from the code and visible to the user. Traditionally two 7-segment displays
were made available on the motherboard to show the last post code that was
emitted. This allows diagnosis of a boot problem since it is possible to
see where the code got to before it died.

On modern hardware these codes are not normally visible. On Chromebooks
they are displayed by the Embedded Controller (EC), so it is useful to emit
them. We must enable this feature for the EC to see the codes, so add an
option for this.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2014-11-21 07:34:11 +01:00
Simon Glass
8ef07571a0 x86: Add chromebook_link board
This board is a 'bare' version of the existing 'link 'board. It does not
require coreboot to run, but is intended to start directly from the reset
vector.

This initial commit has place holders for a wide range of features. These
will be added in follow-on patches and series. So far it cannot be booted
as there is no ROM image produced, but it does build without errors.

Signed-off-by: Simon Glass <sjg@chromium.org>
2014-11-21 07:34:11 +01:00