Enable MISC_INIT_R for ae350 to support CPU name detection
and re-sync the configs via make savedefconfig.
Signed-off-by: Leo Yu-Chi Liang <ycliang@andestech.com>
Reviewed-by: Yu Chien Peter Lin <peterlin@andestech.com>
Detect CPU name through marchid and then save it to env.
Signed-off-by: Leo Yu-Chi Liang <ycliang@andestech.com>
Reviewed-by: Yu Chien Peter Lin <peterlin@andestech.com>
Andes CPU supports cache and TLB ECC.
Enable them by default.
Signed-off-by: Leo Yu-Chi Liang <ycliang@andestech.com>
Reviewed-by: Yu Chien Peter Lin <peterlin@andestech.com>
Andes CPU has memboost feature including prefetch,
write-around and non-blocking load. Enable them by default.
Signed-off-by: Leo Yu-Chi Liang <ycliang@andestech.com>
Reviewed-by: Yu Chien Peter Lin <peterlin@andestech.com>
Kconfig provides SYS_[I|D]CACHE_OFF config options to switch off caches.
Provide the corresponding implementation to the options.
Signed-off-by: Leo Yu-Chi Liang <ycliang@andestech.com>
Reviewed-by: Yu Chien Peter Lin <peterlin@andestech.com>
Extend compatible string to match the latest change in dt binding.
Fixes: 7576ab2fac ("riscv: Add support for AMD/Xilinx MicroBlaze V")
Signed-off-by: Michal Simek <michal.simek@amd.com>
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
The power gating feature of pl2 should be enabled as early as possible,
it would be better to put it in SPL stage.
Signed-off-by: Zong Li <zong.li@sifive.com>
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
This driver is currently responsible for enabling the clock gating
feature of SiFive pre core's private L2 cache.
Signed-off-by: Zong Li <zong.li@sifive.com>
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
Apple machines do not have memory below 4G. Since U-Boot does
not support the SMBIOS 3 header structures this means we can't
support SMBIOS on these machines. Unfortunately the refactoring
of the SMBIOS code this cycle accidentally enabled it again.
Fixes: 53fab13a7b ("efi: Use the installed SMBIOS tables")
Signed-off-by: Mark Kettenis <kettenis@openbsd.org>
Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
If we call efi_binary_run() with size parameter set to zero, we get an error
Not a PE-COFF file
Fill the missing value.
Fixes: 1373ffde52 ("Merge tag 'v2024.01-rc5' into next")
Fixes: 7017fc54a5 ("bootmeth: use efi_loader interfaces instead of bootefi command")
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Simon Glass <sjg@chromium.org> says:
This series continues refactoring the bootm code to allow it to be used
with CONFIG_COMMAND disabled. The OS-handling code is refactored and
a new bootm_run() function is created to run through the bootm stages.
This completes the work.
A booti_go() function is created also, in case it proves useful, but at
last for now standard boot does not use this.
This is cmdd (part d of CMDLINE refactoring)
It depends on dm/bootstda-working
which depends on dm/cmdc-working
Create a common function used by the three existing bootz/i/m_run()
functions, to reduce duplicated code.
Signed-off-by: Simon Glass <sjg@chromium.org>
Suggested-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
In a few places, the booti command is used to handle a boot. We want
these to be done without needing CONFIG_CMDLINE, so add a new
booti_run() function to handle this.
So far this is not used.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
Use the new bootm/z_run() functions to avoid having to create an
argument list for the stm32prog code.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
In a few places, the bootz command is used to handle a boot. We want
these to be done without needing CONFIG_CMDLINE, so add a new
bootz_run() function to handle this.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
Rather than assigning to the bootm_argv[] array multiple times, use
local variables for the two things that can change and assign them at
the end.
This makes it easier to drop the array eventually.
Tidu up an overly short line while we are here.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
In quite a few places, the bootm command is used to handle a boot. We
want these to be done without needing CONFIG_CMDLINE, so add a new
bootm_run() function to handle this.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
Use struct bootm_info with this function, to avoiding needing to
create a new one.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
Rename the function to bootm_run_states() to better indicate ts
purpose. The 'do_' prefix is used to indicate a command processor,
which this is now not.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
Use the bootm_info struct to hold the information required by bootm.
Now that none of the functions called from do_bootm_states() needs an
argv[] list, change the arguments of do_bootm_states() as well. Take
care to use the same value for boot_progress even though it is a little
inconsistent.
For booti make sure it only uses argv[] and argc at the top of the
function, so we can eventually refactor to remove these parameters.
With bootm, some OSes need access to the arguments provided to the
command, so set these up in the bootm_info struct, for bootm only.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
Use the compiler to get the set of states, instead of the preprocessor.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
Use the compiler to get the set of states, instead of the preprocessor.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
This is an exported function, so move the function comment to the
bootm.h header file.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Add fields for the three bootm parameters and other things needed for
booting. Also add a helper to set up the struct correctly.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
Adjust boot_os_fn to use struct bootm_info instead of the separate
argc, argv and image parameters. Update the handlers accordingly. Few
of the functions make use of the arguments, so this improves code size
slightly.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
Some OS functions require the arguments to the 'bootm' command. This is
inconvenient for two reasons.
Firstly, there may not be any actual command, if CMDLINE is not enabled
and programmatic boot is being used.
Secondly, most functions don't require the arguments, so it is
inefficient to pass them when not needed. For example it increases code
size.
Create a new struct which holds the arguments, which can be used if
needed.
Add the images pointer as well, since this is commonly needed.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
It is useful for sandbox to build as much code as possible. Enable
support for booting various other operating systems. Add the missing
cache functions.
These operating systems do not actually boot on sandbox, of course.
Signed-off-by: Simon Glass <sjg@chromium.org>
Use reset_cpu() to reset the board, copying the logic from the 'reset'
command. This makes more sense than directly calling the do_reset()
function with the arguments passsed to the bootm command.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
The current do_reset() is called from a command context. Add a function
which can be used from anywhere, as is done on ARM. Adjust do_reset()
to call it.
Note that reset_cpu() is normally provided by SYSRESET so make this
declaration conditional on that being disabled.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Chanho Park <chanho61.park@samsung.com>
Tested-by: Chanho Park <chanho61.park@samsung.com>
The current do_reset() is called from a command context. Add a function
which can be used from anywhere, as is done on ARM.
Signed-off-by: Simon Glass <sjg@chromium.org>
The current do_reset() is called from a command context. Add a function
which can be used from anywhere, as is done on ARM.
This is only needed if CONFIG_SYSRESET is disabled.
Since there are lots of reset functions, this one actually just calls
do_reset(). Future refactoring could correct this.
Signed-off-by: Simon Glass <sjg@chromium.org>
The current do_reset() is called from a command context. Add a function
which can be used from anywhere, as is done on ARM.
Since there are lots of reset functions, this one actually just calls
do_reset(). Future refactoring could correct this.
Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: Angelo Dureghello <angelo@kernel-spcece.org>
The current do_reset() is called from a command context. Add a function
which can be used from anywhere, as is done on ARM.
Signed-off-by: Simon Glass <sjg@chromium.org>
variable was indented as part of the value of the previous variable.
Signed-off-by: Tomas Alvarez Vanoli <tomas.alvarez-vanoli@hitachienergy.com>
Signed-off-by: Holger Brunck <holger.brunck@hitachienergy.com>
Add a basic implementation of the ARM SMMU. This driver is intended for
use on Qualcomm platforms where the SMMU has been configured by a previous
bootloader, cannot be turned off, and doesn't support BYPASS streams.
It keeps all existing stream mappings and only creates new ones for stream
ids that aren't already configured.
This driver is necessary to support peripherals that perform DMA which
weren't configured by the previous stage bootloader (for example USB).
It works by allocating a context bank using identity mapping (as U-Boot
doesn't use virtual addresses).
Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org>
Add an optional iommu callback to be invoked before a device probes.
This can be used to configure the IOMMU in preparation for the device
(e.g. by allocating a context bank)
Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org>
The dev_pci_iommu_enable() function is only available when CONFIG_PCI is
enabled, replace the runtime check with a preprocessor one to fix
compilation with pci disabled.
Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org>
Disable CONFIG_SPL_LOAD_FIT_APPLY_OVERLAY, this is not required nor used
on verdin am62, disable it to save precious binary size.
Update defconfig using savedefconfig, this adds CONFIG_OF_LIBFDT_OVERLAY
explicitly.
Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
The "fdt" command is convenient for making small changes to the OS FDT,
especially during development. This is easy when the kernel and FDT are
loaded separately, but can be cumbersome for FIT images, requiring to
unpack the image, manually apply overlays, etc.
Add an option to execute a command "fdt_fixup" from the environment at
the beginning of image_setup_libfdt() (after overlays are applied, and
before the other fixups).
Signed-off-by: Matthias Schiffer <matthias.schiffer@ew.tq-group.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
The main_cpsw0_qsgmii_phyinit command is defined only for certain TI
SoCs which have the do_main_cpsw0_qsgmii_phyinit variable set.
Add a check to ensure that the main_cpsw0_qsgmii_phyinit command is run
only for such SoCs.
Signed-off-by: Manorit Chawdhry <m-chawdhry@ti.com>
Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
If FS_LOADER is enabled for the SPL then the build fails with the error:
fs/fs.o:(.data.rel.fstypes+0x128):
undefined reference to `smh_fs_set_blk_dev'
fs/fs.o:(.data.rel.fstypes+0x140):
undefined reference to `smh_fs_size'
fs/fs.o:(.data.rel.fstypes+0x148):
undefined reference to `smh_fs_read'
fs/fs.o:(.data.rel.fstypes+0x150):
undefined reference to `smh_fs_write'
Fix the error by populating the semihosting entry in the fs_types array
only for non-SPL builds.
Signed-off-by: Mayuresh Chitale <mchitale@ventanamicro.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Sean Anderson <seanga2@gmail.com>
After some header file cleanups to add missing include files, remove
common.h from all files in the lib directory. This primarily means just
dropping the line but in a few cases we need to add in other header
files now.
Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Tom Rini <trini@konsulko.com>
Add some missing headers such as <linux/errno.h> or <linux/types.h> or
<linux/kernel.h> to header files that make direct usage of things
provided by these headers.
Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Tom Rini <trini@konsulko.com>
In include/display_options.h we cannot include ourself, but do need
<linux/types.h> directly. Then in lib/display_options.c we further clean
the list to remove common.h.
Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Tom Rini <trini@konsulko.com>
