Commit graph

3762 commits

Author SHA1 Message Date
Alison Wang
158097052a armv7: ls102xa: Add workaround for DDR erratum A-008850
Barrier transactions from CCI400 need to be disabled till
the DDR is configured, otherwise it may lead to system hang.
The patch adds workaround to fix the erratum.

Signed-off-by: Shengzhou Liu <Shengzhou.Liu@nxp.com>
Signed-off-by: Alison Wang <alison.wang@nxp.com>
Reviewed-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
2019-03-15 11:52:01 +05:30
Laurentiu Tudor
7122f79141 armv8: fsl-layerscape: avoid DT fixup warning
sec_firmware reserves JR3 for it's own usage and deletes the JR3 node
from the device tree. This causes this warning to be issued when doing
the device tree fixup:

WARNING could not find node fsl,sec-v4.0-job-ring: FDT_ERR_NOTFOUND.

Fix it by excluding the device tree fixup for the JR reserved by
sec_firmware.

Signed-off-by: Laurentiu Tudor <laurentiu.tudor@nxp.com>
Reviewed-by: Horia Geanta <horia.geanta@nxp.com>
Reviewed-by: Bharat Bhushan <bharat.bhushan@nxp.com>
Reviewed-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
2019-03-03 22:01:14 +05:30
Laurentiu Tudor
e82d9ee73a armv8: fsl-layerscape: fix SEC QI ICID setup
The SEC QI ICID setup in the QIIC_LS register is actually an offset
that is being added to the ICID coming from the qman portal. Setting
it with a non-zero value breaks SMMU setup as the resulting ICID is
not known. On top of that, the SEC QI ICID must match the qman portal
ICIDs in order to share the isolation context.

Signed-off-by: Laurentiu Tudor <laurentiu.tudor@nxp.com>
Reviewed-by: Horia Geanta <horia.geanta@nxp.com>
Reviewed-by: Bharat Bhushan <bharat.bhushan@nxp.com>
Reviewed-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
2019-03-03 22:01:09 +05:30
Rajesh Bhagat
bbf5b25282 armv8: layerscape: move TZASC and TZPC configs to Kconfig
Moves FSL_TZASC_400 and FSL_TZPC_BP147 configs to Kconfig
for LS1088A and LS2088A platforms.

Signed-off-by: Rajesh Bhagat <rajesh.bhagat@nxp.com>
Reviewed-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
2019-02-19 10:26:44 +05:30
Pankaj Bansal
1eba723c72 lx2160aqds : Add support for LX2160AQDS platform
LX2160AQDS is a development board that supports LX2160A
family SoCs. This patch add base support for this board.

Signed-off-by: Wasim Khan <wasim.khan@nxp.com>
Signed-off-by: Sriram Dash <sriram.dash@nxp.com>
Signed-off-by: Pankaj Bansal <pankaj.bansal@nxp.com>
Signed-off-by: Udit Agarwal <udit.agarwal@nxp.com>
[PK: Sqaush patch for "secure boot defconfig" & add maintainer]
Signed-off-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
2019-02-19 10:26:44 +05:30
Priyanka Jain
fc615be4a6 armv8: lx2160a: Update CONFIG_SYS_FSL_PEBUF_BASE
As per hardware documentation,
CONFIG_SYS_FSL_PEBUF_BASE for lx2160a is 0x1c00000000

Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
Reviewed-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
2019-02-19 10:26:43 +05:30
Abel Vesa
79536013a3 usb: Rename SPL_USB_SUPPORT to SPL_USB_STORAGE
Since there is the SPL_USB_HOST_SUPPORT for enabling USB support in SPL,
makes more sense to rename the SPL_USB_SUPPORT as SPL_USB_STORAGE.
Everything that is not part of the usb storage support in SPL is now
build under SPL_USB_HOST_SUPPORT.

Signed-off-by: Abel Vesa <abel.vesa@nxp.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Reviewed-by: Lukasz Majewski <lukma@denx.de>
2019-02-15 22:01:15 +01:00
Lukasz Majewski
c5b22a5360 ddr: vybrid: Add DDRMC calibration related registers (DQS to DQ)
This commit provides extra defines needed for DDR memory controller
calibration (read leveling performing).

Signed-off-by: Lukasz Majewski <lukma@denx.de>
Reviewed-by: Stefan Agner <stefan.agner@toradex.com>
2019-02-15 12:16:50 +01:00
Simon Glass
9e92116bc8 rockchip: Add support for chromebook_bob
Bob is a 10-inch chromebook produced by Asus. It has two USB 3.0 type-C
ports, 4GB of SDRAM, WiFi and a 1280x800 display. It uses its USB ports
for both power and external display. It includes a Chrome OS EC
(Cortex-M3) to provide access to the keyboard and battery functions.

Support so far includes only:
- UART
- SDRAM
- MMC, SD card
- Cros EC (but not keyboard)

Not included:
- Keyboard
- Display
- Sound
- USB
- TPM

Bob is quite similar to Kevin, the Samsung Chromebook Plus, but support
for this is not provided in this series.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2019-02-01 16:59:13 +01:00
Simon Glass
aa48c94ca8 rockchip: Implement spl_gpio in the GPIO driver
Allow rockchip boards to use GPIOs before driver model is ready. This is
really only useful for setting GPIOs to enable the early debug console, if
needed on some platforms.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2019-02-01 16:59:13 +01:00
Simon Glass
3ec6f11c7d rockchip: Move pull-up/down enum into a common file
At present this enum is only available to rk3288. Move it so that other
rockchip SoCs can access it. It is needed for the SPL GPIO driver for
rk3999 in a later patch.

Also adjust the enum name to lower case.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2019-02-01 16:59:13 +01:00
Simon Glass
3dbfe5ae61 rockchip: rk3288: Add i2s pinctrl and clock support
Add support for setting pinctrl and clock for I2S on rk3288. This allows
the sound driver to operate. These settings were created by rkmux.py

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2019-02-01 16:59:10 +01:00
Neil Armstrong
3bed422094 video: Add Meson Video Processing Unit Driver
This adds video output support for Amlogic GXBB/GXL/GXM chips.
The supported ports are CVBS and HDMI (based on DW_HDMI).

When using HDMI, only DMT modes are supported.

There is support for simple-framebuffer (CONFIG_VIDEO_DT_SIMPLEFB)

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Jorge Ramire-Ortiz <jramirez@baylibre.com>
Signed-off-by: Maxime Jourdan <mjourdan@baylibre.com>
[narmstrong: fixed defines alignment in meson_canvas.c]
Reviewed-by: Anatolij Gustschin <agust@denx.de>
2019-01-31 09:35:01 +01:00
Tom Rini
748ad078ee For 2019.04
-----BEGIN PGP SIGNATURE-----
 
 iQHDBAABCgAtFiEEiZClFGvhzbUNsmAvKMTY0yrV63cFAlxQnKQPHHNiYWJpY0Bk
 ZW54LmRlAAoJECjE2NMq1et3Mm8L/0P99AB62Pu0NbAaVI9PnqaeR9/kUIvHlaPT
 RMuUIz931/1GDnugGsEEquSMUt69lfBCKYbF4sKiWObytHfYKvB/u638gqG2IoEt
 KcnWU5dagaTOyoyPOtr8EyKxThJtG2j1uN+fA5BCZ6A6CLnEW0biJXYLwN5P/DIE
 bsn9R+XfOV/ppaFh3p65SZfzzwKh6eUQLHqEphBbbAHCPz74QSeZMHkumbKplGOk
 1cjuFi8bekFnPGDDPW8jRvUNlhRD0kTjXoBj1eF2Q1g8lUj6La8yOsq1DAeGJjd1
 ywUDi8GPNYQ7HuHNzfZETWAYspNflARnPQwMemmNSKmmu6CO8aB6lt3JZWEUrnjL
 1D8LzMrRpyq1jEA0a57qsvTc8i3KA7X3FHTszP0flhiLKgBgE+5t1w8dc0wxC7HZ
 eF9TE3tGAmVzRVZwBh8HIDuKhe+y3uGKtvxl80DF8vQQWrXHq0GSC+pmdEXk7DGU
 OGYvdvVoThglZwM4vqeKlT/+1KLPCQ==
 =dOOt
 -----END PGP SIGNATURE-----

Merge tag 'u-boot-imx-20190129' of git://git.denx.de/u-boot-imx

For 2019.04
2019-01-30 07:22:12 -05:00
Ye Li
d8bbf362f3 imx: Check the PL310 version for applying errata
Apply errata based on PL310 version instead of compile
time. Also set Prefetch offset to 15, since it improves
memcpy performance by 35%. Don't enable Incr double
Linefill enable since it adversely affects memcpy
performance by about 32MB/s and reads by 90MB/s. Tested
with 4K to 16MB sized src and dst aligned buffer.

Signed-off-by: Nitin Garg <nitin.garg@freescale.com>
Signed-off-by: Ye Li <ye.li@nxp.com>
2019-01-28 20:55:46 +01:00
Lukasz Majewski
56ac8104e3 ARM: imx: fix: Provide correct enum values for ONENAND/NOR boot recognition
According to "Table 5-1. Boot Device Select" (page 335,
i.MX 6Dual/6Quad Applications Processor Reference Manual, Rev. 4, 09/2017)
the BOOT_CFG1[3] have following values (regarding EIM booting):
0 - NOR flash and 1 - ONENAND

This commit provides correct identification of the boot medium for IMX6Q
boards booting from NOR memory (MCCMON6 is one of them).

Signed-off-by: Lukasz Majewski <lukma@denx.de>
2019-01-28 20:55:46 +01:00
Shawn Guo
7fa6d33684 poplar: clean up board level mmc initialization code
We have converted mmc to driver model on Poplar.  So let's clean up
board level mmc initialization code.

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Acked-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
2019-01-25 12:12:57 -05:00
Tom Rini
d01806a8fc Merge branch 'master' of git://git.denx.de/u-boot-sunxi 2019-01-24 15:30:48 -05:00
Michal Simek
274ccb5b11 arm64: zynqmp: Move SoC sources to mach-zynqmp
Similar changes was done for Zynq in past and this patch just follow
this pattern to separate cpu code from SoC code.

Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/*
And also fix references to these files.

Based on
"ARM: zynq: move SoC sources to mach-zynq"
(sha1: 0107f24036)

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-01-24 10:03:44 +01:00
Tom Rini
77c07e7ed3 Add TFA boot flow for more boards
Add TFA boot defconfig for ls1088a and ls2088a.
 Add dts fixup for PCIe endpoint and root complex.
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEorkTmaQ1QAtDiYw67UVZlNoLnbQFAlxCFVMACgkQ7UVZlNoL
 nbQJaA/9GQ+FpUj8AzsWmLd1JYMdjQeoltlYSicqV1oPkzjX3BsPncAYsr6cW2rm
 SMkriCw+xrlTgC8ge1dyzKxWqMovGzUFEGxpDJqIKCc16s8A/Ro+R0y8saNq1Y89
 MI2axPoaPDT4ZRCSWMzzFVv3lfdvFgGyygZljNlmiKqWp1//fE0OJD4ggE8SqgVo
 +5cMmufuhQhuFuFulQw6YwAOdrJ0eN8wb1SB9wJ8zwdwKn6Oy4CgkRGjJEjKRNoK
 Posw8FUPxQybXmsXW2vie9oomQqmI2A1ILzl1KvdRHSbW0N6P7MbAgsGH1vDPW0u
 dDAsutmkjYR7Ihq/4/5jcTdjkPd7LRJU/SSJzRSnZSD1uLDt5Z4jerQBq0BN9nMR
 peUS/nQ5LTT+rGBRevFT1I0hGNVHhArKGpumV8VRxlq7a30lUPSKhd3jOsadqVLU
 TchCZPjFIVaTrlz9NoX0Wa8bz+m5v1MygRiPkxERc8ft3cudn3rI83neeK1WVKSy
 uwSttQ+Q2uPXBvPq80fIKNToxkEBihPCbEHXZUUs3iE3r+jnRLAZ8CelAn1qK7n6
 fw1oduqOqupPVtYaLHZa6fAWj7lX0FCSge7z4oYu4ezCtoCutzUb6rgwHCpSLEA0
 OF/3fzb+Gn68GpcP23P0pPx+0UplEcmOT+f2/fUXgarUyxd5H/Y=
 =vNy2
 -----END PGP SIGNATURE-----

Merge tag 'fsl-qoriq-for-v2019.04-rc1' of git://git.denx.de/u-boot-fsl-qoriq

Add TFA boot flow for more boards

Add TFA boot defconfig for ls1088a and ls2088a.
Add dts fixup for PCIe endpoint and root complex.
2019-01-18 23:11:51 -05:00
Jagan Teki
99ba430870 reset: Add Allwinner RESET driver
Add common reset driver for all Allwinner SoC's.

Since CLK and RESET share common DT compatible, it is CLK driver
job is to bind the reset driver. So add CLK bind call on respective
SoC driver by passing ccu map descriptor so-that reset deassert,
deassert operations held based on ccu reset table defined from
CLK driver.

Select DM_RESET via CLK_SUNXI, this make hidden section of RESET
since CLK and RESET share common DT compatible and code.

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Acked-by: Maxime Ripard <maxime.ripard@bootlin.com>
2019-01-18 22:19:08 +05:30
Jagan Teki
0d47bc7056 clk: Add Allwinner A64 CLK driver
Add initial clock driver for Allwinner A64.

Implement USB clock enable and disable functions for
OHCI, EHCI, OTG and USBPHY gate and clock registers
via ccu clk gate table.

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Acked-by: Maxime Ripard <maxime.ripard@bootlin.com>
2019-01-18 22:19:08 +05:30
Stefan Mavrodiev
da1ae5905e sunxi: board: Add i2c initialization for sun50i
To use TWI0/1/2 the user can select CONFIG_I2C#_ENABLE.
However even the controller is enabled, the mux for the pins
are not set.

This patch follows the existing mux method. Since the pads are
different, separate check is added for each i2c.

Tested with A64-SOM204 board.

Signed-off-by: Stefan Mavrodiev <stefan@olimex.com>
Acked-by: Maxime Ripard <maxime.ripard@bootlin.com>
Reviewed-by: Jagan Teki <jagan@openedev.com>
2019-01-18 22:19:08 +05:30
Laurentiu Tudor
a954f6fe70 armv8: fsl-layerscape: properly configure qdma ICID
The ICIDs for the qdma device are not configured through SCFG but
through some registers found in the actual device register block.

Signed-off-by: Laurentiu Tudor <laurentiu.tudor@nxp.com>
Reviewed-by: York Sun <york.sun@nxp.com>
2019-01-17 13:17:15 -08:00
Hou Zhiqiang
ec88ff80ff armv8: ls1043a: add SVR definitions for 23x23 package silicon
LS1043A/LS1023A 23x23 package silicon has different SVR:VAR_PER.

Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com>
Reviewed-by: York Sun <york.sun@nxp.com>
2019-01-17 13:16:40 -08:00
Weijie Gao
3e066bcaef reset: MedaiTek: add reset controller driver for MediaTek SoCs
This patch adds reset controller driver for MediaTek SoCs.

Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
Signed-off-by: Weijie Gao <weijie.gao@mediatek.com>
2019-01-14 17:43:18 -05:00
Shawn Guo
e7ab6dfc65 poplar: add DWC2 OTG gadget support
It enables DWC2 OTG gadget driver support for Poplar board.  As
usb2_phy_init() is being always called from board_init(), we can save
the call from board_usb_init().

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2019-01-14 17:42:44 -05:00
Tom Rini
e5aa3f4d97 Fixes for 2019.01
-----BEGIN PGP SIGNATURE-----
 
 iQHDBAABCgAtFiEEiZClFGvhzbUNsmAvKMTY0yrV63cFAlw2/EgPHHNiYWJpY0Bk
 ZW54LmRlAAoJECjE2NMq1et32w4MAInrLv5lIvzwlcCxsX25cbWO8TSRemt4Stbl
 g01Cq/yaHkTs/VTpHHqtuAy+PHBx6pFSIJNp8zheNy/VGMHavb+RSVH3d+KM6uU3
 qCfVQq3ZMm4NyvbnrJSW6Uu2qmmEJQssldWuRhIIEFK1nCrYKQp9eyo215miLbFE
 9b1MWFO+XV0Qz+HZQsk2ApiuvmaXu3qpvZ0tRRi9xb2dGJYYTuEcfvbehy7Iejta
 +JKd3wtZaKj1JDdsDFQoJs55OAdJySTSYAeNVzlstQ+1fYArB3Ju4et2QInWbXuF
 x/NdFAzyAtl4xOf8yQ9kbALa3TlofhPu9fJm7bniC3hf+ZPPwdS3jlvEy+DeCJIU
 tX/es+WgUVciiCfRHXS1RgFuHGDDpO5qi2RjSLqq6yRhlBAvXYhET2YCU9RLoLHY
 D57V6lkFl7jWto8xS7GoicKvGPS5MwjARw917TSocJzhJz86PeJBhOW6tR+E2/Zh
 kCDDCrKlyuLRg+2/eFV5H91TalwjQQ==
 =vYKZ
 -----END PGP SIGNATURE-----

Merge tag 'u-boot-imx-20190110' of git://git.denx.de/u-boot-imx

Fixes for 2019.01
2019-01-10 09:28:16 -05:00
Stefan Agner
52c2c97e7c ARM: vf610: ddrmc: fix initialization completion detection
The CR80 register has multiple interrupt bits, the code is supposed
to check bit 8 but instead uses a logical and. In most cases this
probably did not affect real operations since at that stage typically
none of the other bits are set.

Signed-off-by: Stefan Agner <stefan.agner@toradex.com>
Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
2019-01-09 16:27:23 +01:00
Stefan Agner
b77e368fa2 ARM: vf610: ddrmc: fix CR138 preprocessor define
According to the data sheet bits 10-8 are PHYDRAM_CK_EN. Fix mask
to allow setting PHYDRAM_CK_EN correctly.

Signed-off-by: Stefan Agner <stefan.agner@toradex.com>
Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Reviewed-by: Lukasz Majewski <lukma@denx.de>
2019-01-09 16:27:08 +01:00
Stefan Agner
a95d444055 ARM: vf610: ddrmc: program Dummy DDRBYTE1/2
The Vybrid reference manual VFXXXRM Rev. 0 10/2016 states in chapter
5.2.6.1 DUMMY PADS (DDR/QuadSPI) that those pads need to be programed
for correct operation of DDR. Assume the default DDR pin configuration
which seems to work well on a Colibri VF50.

Signed-off-by: Stefan Agner <stefan.agner@toradex.com>
2019-01-09 16:19:36 +01:00
Ye Li
9d47d1316d arm: Round the dma_alloc_coherent memory size to cache line aligned
When running usb dwc3 gadget driver, we meet random USB enumeration failure in fastboot.
The root cause is a cache coherence issue. When it happens, the ctrl_req in
gadget driver is allocated at 0xfe932f40, and the usb_composite_dev (cdev)
is allocated at 0xfe932f60. So after we submit the setup request (cache flushed) to USB
controller, any accessing to usb_composite_dev variable will cause the cache line refill, then
when setup transfer is completed, reading the setup data in ctrl_req will gets old value from
cache not from memory.

The ctrl_req is allocated by API dma_alloc_coherent, but u-boot don't have cohernet memory.
so it still needs cache maintain operations before/after HW accessing. Since the cache flush or
invalidate bases on cache line, so when the allocated memory size is not cache line aligned,
potentially it may meet such issue.

This patch modifies the dma_alloc_coherent API to round the size to cache line aligned.

Signed-off-by: Ye Li <ye.li@nxp.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
2019-01-09 07:13:31 -05:00
Tom Rini
522e035441 imx for 2019.01
- introduce support for i.MX8M
 - fix size limit for Vhybrid / pico boards
 - several board fixes
 - w1 driver for MX2x / MX5x
 -----BEGIN PGP SIGNATURE-----
 
 iQHDBAABCgAtFiEEiZClFGvhzbUNsmAvKMTY0yrV63cFAlwrbc8PHHNiYWJpY0Bk
 ZW54LmRlAAoJECjE2NMq1et3oCwL/RCqesqQaLKkUQDiYQJzoa6Ia7TeSTD1HoHl
 lYXarE9FloD7lHp4Lz1elU8Y+yTtjvixKS9UJGRc0pMcJJ/CEavjK+oBOVNbEnvH
 vm/oXQfZqj60tLc2Z7RfRe1gHHCcaGiBXJePea5WhP89cUZW1YBs4TVY2AIEQeRV
 V8vcxbBprqqBWyFRgH+ORsWrmkfcYEfiMr97Y8v07RRPX/C80e98PTc16fh9o7S1
 +i8Pcs0SIMnA8PqXVgrpa4DT7OS/ZtLADG/ODpvJ25nHoKvdhlXMc8o8L5dyaO1f
 66UD0A8D3PXkXkFodZujSjtKl5ygeA/4YkEnY6PRqd2W6kZsq6R7XCu/3e3eQSwK
 GFnWQnzLkDOCKMZlxR8l3sJdhY3Ee3oAQ+EX3PEy1MvKKrGA8PSOIKHq3tVNrPYB
 tBnJP32G+2Ya0SG169ROoUMZQQXfTt+9kdqsxx5xL2Pfpt9d+YinCM8uQdhqBGPa
 COqegLaD0ZkADsodZp876u3Irbo6bw==
 =mEcH
 -----END PGP SIGNATURE-----

Merge tag 'u-boot-imx-20190101' of git://www.denx.de/git/u-boot-imx

imx for 2019.01

- introduce support for i.MX8M
- fix size limit for Vhybrid / pico boards
- several board fixes
- w1 driver for MX2x / MX5x
2019-01-01 10:01:00 -05:00
Peng Fan
416f63194b imx8m: ddr: removed unused macros
Remove unused DDRC register macros.

Signed-off-by: Peng Fan <peng.fan@nxp.com>
2019-01-01 14:12:18 +01:00
Peng Fan
e3963c0943 drivers: ddr: introduce DDR driver for i.MX8M
Introduce DDR driver for i.MX8M. The driver will be used by SPL to
initialze DDR PHY and DDR Controller.

Signed-off-by: Peng Fan <peng.fan@nxp.com>
2019-01-01 14:12:18 +01:00
Peng Fan
389023ced0 imx: imx8m: add lpddr4 header file
Introduce lpddr4 header file

Signed-off-by: Peng Fan <peng.fan@nxp.com>
2019-01-01 14:12:18 +01:00
Peng Fan
b3e5cb8d35 imx: imx8m: clock refactor dram pll part
Refactor dram_pll_init to accept args to configure different pll freq.
Introduce dram_enable_bypass and dram_disable_bypass

Signed-off-by: Peng Fan <peng.fan@nxp.com>
2019-01-01 14:12:18 +01:00
Peng Fan
cd357ad112 imx: rename mx8m,MX8M to imx8m,IMX8M
Rename mx8m,MX8M to imx8m,IMX8M

Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Jon Nettleton <jon@solid-run.com>
2019-01-01 14:12:18 +01:00
Peng Fan
14d4a3d2aa imx: introduce is_imx8mq helper
Introduce is_imx8mq header macro

Signed-off-by: Peng Fan <peng.fan@nxp.com>
2019-01-01 14:12:18 +01:00
Peng Fan
5041d1e3b2 imx: cpu: add CHIP_REV_2_1 macro
Introduce CHIP_REV_2_1 macro.

Signed-off-by: Peng Fan <peng.fan@nxp.com>
2019-01-01 14:12:18 +01:00
Jean-Jacques Hiblot
7d98dbcc3d usb: musb-new: Add support for DM_USB
Enable DM for USB peripheral in the musb-new driver.
Also make sure that the driver can be used in the SPL.
This implies that:
* the driver must work with and without the OF_CONTROL option. That
in turn, implies that the platform data can be passed in a struct
ti_musb_platdata or be read from the dtb
* usb.o is linked in the SPL if host support is enabled

Another change is that the driver does not fail to bind (and stop the boot
process) if one of the child driver does not bind. Reporting the error is
enough. This kind of error would appear if the port is configured in the
DTS but the driver is not activated in the config.

Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
2018-12-14 17:59:10 +01:00
Tom Rini
d94604d558 Add TFA boot flow for some Layerscape platforms
Add support for lx2160a SoC
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEorkTmaQ1QAtDiYw67UVZlNoLnbQFAlwOzFoACgkQ7UVZlNoL
 nbQUdQ//SRRBfjUe8RYTbojvTGQav0GTxnMkz4GFSrqu0nvGMW2YSlheOMqq72sg
 rK5mQqDvdkItCn+G8AZ5NV2ijkQ7NQWCfqL3EtApzTpv6qjfgv7xvopz8q4NZvzB
 Wp+4cFf9YQjNwhJ7kLvWHB7SBiz9AfMYRAj9cscH9xsGL3HxPj62WDfwyK/QXana
 KIxRKQ26/1AdOZy272yv70vlFj4IwForxV3ACimsWRuYcb8yre3pE0tD7XpMCSNv
 9GOfL7r4LS7U0+QnJoVeYLMhttRvOGJNUYtO2+ImO5NC3u9v8ehYEQ3FjGmM69CB
 vuPDQBDQc+Ap+Iu3k18PYSstp+mc9fbe9SQdlx6ARAecQqWTN4EOhf8s3m2bQq3S
 B58I0Zvowcdm8V2JKdXw94UqZX862U8PWH0BmcuX+4k+kRDwwU4XQY2nLp+Htz1w
 2q6vEdKGj7YUOaomx9fmKRL+9BFGoD+M9mTiHOwzqwxy6Pa9VkruSvMErM7p2l/z
 xI/Q+xPJhyk5TXgZRsz4Nat59WpifWruibKEd4PArQ446heHWmzLWjw/MWiFyd/H
 agCdpDZVJ8R7h1Krs+Ez8XjR1Qcg0gs+CdNBuvqxzOpMQGGonXA1nwi8YfHykhII
 urfoC8pew1yxiLGw7J2JSX808HV/09WCSEsrOOhE3T78rXTDlS4=
 =aT7d
 -----END PGP SIGNATURE-----

Merge tag 'fsl-qoriq-for-v2019.01-rc2' of git://git.denx.de/u-boot-fsl-qoriq

Add TFA boot flow for some Layerscape platforms
Add support for lx2160a SoC

[trini: Add a bunch of missing MAINTAINERS entries]
Signed-off-by: Tom Rini <trini@konsulko.com>
2018-12-10 17:19:59 -05:00
Jean-Jacques Hiblot
5f97ae6814 i2c: omap24xx_i2c: Use platdata to probe the device
This allows the driver to be used without OF_CONTROL.
AM335x support DM_SPL but does not use SPL_OF_CONTROL. Enabling DM_I2C in
SPL thus requires that the omap I2C can be passed platdata.

Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Heiko Schocher <hs@denx.de>
2018-12-10 06:11:18 +01:00
Vignesh R
bca09ce4b0 i2c: omap24xx_i2c: Move away from SoC specific headers for reg offset
Move away from SoC specific headers to handle different register layout.
Instead use driver data to get appropriate register layouts like in the
kernel. While at it, perform some mostly cosmetic alignment/cleanup in
the functions being updated.

Signed-off-by: Vignesh R <vigneshr@ti.com>
Signed-off-by: Andreas Dannenberg <dannenberg@ti.com>
Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Heiko Schocher <hs@denx.de>
2018-12-10 06:09:34 +01:00
Patrice Chotard
b2f84e37e2 gpio: stm32f7: Move STM32_GPIOS_PER_BANK into gpio.h
To allow access to this define by other driver, move
it into gpio.h

Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2018-12-07 08:13:47 -05:00
Patrice Chotard
dbf928dd26 gpio: stm32f7: Add gpio bank holes management
In some STM32 SoC packages, GPIO bank has not always 16 gpios.
Several cases can occur, gpio hole can be located at the beginning,
middle or end of the gpio bank or a combination of these 3
configurations.

For that, gpio bindings offer the gpio-ranges DT property which
described the gpio bank mapping.

Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2018-12-07 08:13:47 -05:00
Álvaro Fernández Rojas
47b1cbaf02 arm: implement {in, out}_{16, 32} and {clr, set, clrset}bits_{16, 32}
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2018-12-07 08:13:46 -05:00
Priyanka Jain
4909b89ec7 armv8: lx2160a: Add LX2160A SoC Support
LX2160A Soc is based on Layerscape Chassis Generation 3.2
architecture with features:
 16 ARM v8 Cortex-A72 cores in 8 cluster, CCN508, SEC,
 2 64-bit DDR4 memory controller, RGMII, 8 I2C controllers,
 3 serdes modules, USB 3.0, SATA, 4 PL011 SBSA UARTs,
 4 TZASC instances, etc.

SoC personalites:
LX2120A is SoC with Twelve 64-bit ARM v8 Cortex-A72 CPUs
LX2080A is SoC with Eight 64-bit ARM v8 Cortex-A72 CPUs

Signed-off-by: Bao Xiaowei <xiaowei.bao@nxp.com>
Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com>
Signed-off-by: Meenakshi Aggarwal <meenakshi.aggarwal@nxp.com>
Signed-off-by: Vabhav Sharma <vabhav.sharma@nxp.com>
Signed-off-by: Sriram Dash <sriram.dash@nxp.com>
Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
Reviewed-by: York Sun <york.sun@nxp.com>
2018-12-06 14:37:19 -08:00
Priyanka Jain
d6fdec211f armv8:fsl-layerscape: Add support for Chassis 3.2
NXP layerscape architecture Chassis 3.2 builds upon chassis3
architecture with changes like DDR Memory map change,
removal of IFC and support of upto 8 I2C controller.

Patch add README.lsch3_2 and the above changes under
macro CONFIG_NXP_LSCH3_2.

Signed-off-by: Sriram Dash <sriram.dash@nxp.com>
Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
Reviewed-by: York Sun <york.sun@nxp.com>
2018-12-06 14:37:19 -08:00
Priyanka Jain
6252faa0da armv8: lsch3: Add support of serdes3 module
Some lsch3 based SoCs like lx2160a contains three
serdes modules.
Add support for third serdes protocol in lsch3

Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
Reviewed-by: York Sun <york.sun@nxp.com>
2018-12-06 14:37:19 -08:00