Commit graph

1433 commits

Author SHA1 Message Date
Prabhakar Kushwaha
a9320c495e arch: powerpc: Remove unused dts frequency fixup for lbc_clk
lbc_clk is used to fixup dts as "bus frequency".
It is not being used by Linux IFC and eLBC driver.

So remove unused "bus frqeuency" fix-up of devicre tree.

Signed-off-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
Reviewed-by: York Sun <york.sun@nxp.com>
2016-10-14 10:23:11 -07:00
Robert P. J. Day
fc0b5948e0 Various, accumulated typos collected from around the tree.
Fix various misspellings of:

 * deprecated
 * partition
 * preceding,preceded
 * preparation
 * its versus it's
 * export
 * existing
 * scenario
 * redundant
 * remaining
 * value
 * architecture

Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca>
Reviewed-by: Jagan Teki <jteki@openedev.com>
Reviewed-by: Stefan Roese <sr@denx.de>
2016-10-06 20:57:40 -04:00
Simon Glass
ca12e65caa spl: Add a parameter to jump_to_image_linux()
Instead of using the global spl_image variable, pass the required struct in
as an argument.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
2016-10-06 14:48:19 -04:00
Sriram Dash
f413d1cae8 mpc85xx: powerpc: usb: Update the list of Socs afftected by erratum A006261
Apply the erratum A006261 for the following Socs:
P2041 rev 2.0, P2040 rev 2.0, P5040 rev 2.0, 2.1

Do not apply erratum A006261 for the following Socs:
T4160, T4080, T1040, T1042, T1020, T1022, T2080, T2081

Erratum A006261 is applicable for the following Socs:
P1010(1.0, 2.0), P2041(1.0, 1.1, 2.0, 2.1), P2040(1.0, 1.1, 2.0, 2.1),
P3041(1.0, 1.1, 2.0, 2.1), P5010(1.0, 2.0), P5020(1.0, 2.0),
P5021(1.0, 2.0), T4240(1.0, 2.0), P5040(1.0,2.0,2.1).

Signed-off-by: Sriram Dash <sriram.dash@nxp.com>
Signed-off-by: Rajesh Bhagat <rajesh.bhagat@nxp.com>
Reviewed-by: York Sun <york.sun@nxp.com>
2016-09-28 09:08:16 -07:00
Sriram Dash
15a6d496e7 mpc85xx: powerpc: usb: Enable Usb phy initialisation settings for P1010
CONFIG_SYS_FSL_USB1_PHY_ENABLE is set and the USB Phy
offset are set to enable the initial setting of Usb Phy for P1010.

Signed-off-by: Sriram Dash <sriram.dash@nxp.com>
Signed-off-by: Rajesh Bhagat <rajesh.bhagat@nxp.com>
Reviewed-by: York Sun <york.sun@nxp.com>
2016-09-28 09:08:16 -07:00
Sriram Dash
08efeac55f mpc85xx: powerpc: usb: Modified the erratum A006261 according to endianness
Modifies erratum implementation due to the fact that P3041,
P5020, and P5040 are all big endian for the USB PHY registers, but
they were specified little endian.

Signed-off-by: Sriram Dash <sriram.dash@nxp.com>
Signed-off-by: Rajesh Bhagat <rajesh.bhagat@nxp.com>
Reviewed-by: York Sun <york.sun@nxp.com>
2016-09-28 09:08:16 -07:00
Tom Rini
cbe7706ab8 Merge git://git.denx.de/u-boot-fsl-qoriq
trini: Drop local memset() from
examples/standalone/mem_to_mem_idma2intr.c

Signed-off-by: Tom Rini <trini@konsulko.com>
2016-09-26 17:10:56 -04:00
Masahiro Yamada
4491327d59 Remove arch/${ARCH}/include/asm/errno.h
Unlike Linux, nothing about errno.h is arch-specific in U-Boot.
As you see, all of arch/${ARCH}/include/asm/errno.h is just a
wrapper of <asm-generic/errno.h>.  Actually, U-Boot does not
export headers to user-space, so we just have to care about the
consistency in the U-Boot tree.

Now all of include directives for <asm/errno.h> are gone.
Deprecate <asm/errno.h>.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Alexey Brodkin <abrodkin@synopsys.com>
2016-09-23 17:56:18 -04:00
Masahiro Yamada
1221ce459d treewide: replace #include <asm/errno.h> with <linux/errno.h>
Now, arch/${ARCH}/include/asm/errno.h and include/linux/errno.h have
the same content.  (both just wrap <asm-generic/errno.h>)

Replace all include directives for <asm/errno.h> with <linux/errno.h>.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
[trini: Fixup include/clk.]
Signed-off-by: Tom Rini <trini@konsulko.com>
2016-09-23 17:55:42 -04:00
Masahiro Yamada
b5bf5cb3b3 treewide: use #include <...> to include public headers
We are supposed to use #include <...> to include headers in the
public include paths.  We should use #include "..." only for headers
in local directories.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2016-09-23 17:53:56 -04:00
Masahiro Yamada
63a7578e4e arch, board: squash lines for immediate return
Remove unneeded variables and assignments.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Minkyu Kang <mk7.kang@samsung.com>
Reviewed-by: Angelo Dureghello <angelo@sysam.it>
2016-09-23 17:53:53 -04:00
Tom Rini
adf32adb70 PowerPC: Update MIP405/MIP405T to use Kconfig better
Convert CONFIG_MIP405T from SYS_EXTRA_OPTIONS to a real config

There are two boards, MIP405 and MIP405T that have a few differences.
Start by checking for CONFIG_TARGET_MIP405.  Then introduce
CONFIG_TARGET_MIP405T and use that not CONFIG_MIP405T.  Next, convert
also convert the usage of CONFIG_ISO_STRING to be based on Kconfig.

Signed-off-by: Tom Rini <trini@konsulko.com>
2016-09-20 09:30:25 -04:00
Siva Durga Prasad Paladugu
a4d88920e5 Kconfig: Move config IDENT_STRING to Kconfig
Move the config IDENT_STRING to Kconfig and migrate all boards

[sivadur: Migrate zynq boards]
Signed-off-by: Siva Durga Prasad Paladugu <sivadur@xilinx.com>
[trini: Update configs, add some default to sunxi Kconfig]
Signed-off-by: Tom Rini <trini@konsulko.com>
2016-09-20 09:30:23 -04:00
Simon Glass
d3662dff78 Convert CONFIG_SPL_DRIVERS_MISC_SUPPORT to Kconfig
Move this option to Kconfig and tidy up existing uses.

Signed-off-by: Simon Glass <sjg@chromium.org>
2016-09-16 17:27:08 -04:00
Simon Glass
d3e7e2b2ce Convert CONFIG_SPL_HASH_SUPPORT to Kconfig
Move this option to Kconfig and tidy up existing uses.

Signed-off-by: Simon Glass <sjg@chromium.org>
2016-09-16 17:27:07 -04:00
Simon Glass
dbdaeee43c Convert CONFIG_SPL_CRYPTO_SUPPORT to Kconfig
Move this option to Kconfig and tidy up existing uses.

Signed-off-by: Simon Glass <sjg@chromium.org>
2016-09-16 17:27:07 -04:00
Simon Glass
d3c1f46737 Move existing use of CONFIG_SPL_RSA to Kconfig
A few boards define this in a header file which is incorrect. It means that
Kconfig options that rely on this cannot be used. Move it.

Signed-off-by: Simon Glass <sjg@chromium.org>
2016-09-16 17:03:45 -04:00
Simon Glass
3433a693a9 Move existing use of CONFIG_SPL_DM to Kconfig
A few boards define this in a header file which is incorrect. It means that
Kconfig options that rely on this cannot be used. Move it.

Note that quite a few boards defined this options but do not appear to
actually use SPL:

	BSC9132QDS_NOR_DDRCLK100_SECURE
	BSC9132QDS_NOR_DDRCLK133_SECURE
	BSC9132QDS_SDCARD_DDRCLK100_SECURE
	BSC9132QDS_SDCARD_DDRCLK133_SECURE
	BSC9132QDS_SPIFLASH_DDRCLK100_SECURE
	BSC9132QDS_SPIFLASH_DDRCLK133_SECURE
	C29XPCIE_NOR_SECBOOT
	P1010RDB-PA_36BIT_NAND_SECBOOT
	P1010RDB-PA_36BIT_SPIFLASH_SECBOOT
	P1010RDB-PA_NAND_SECBOOT
	P1010RDB-PA_NOR_SECBOOT
	P1010RDB-PB_36BIT_NOR_SECBOOT
	P1010RDB-PB_36BIT_SPIFLASH_SECBOOT
	P1010RDB-PB_NAND_SECBOOT
	P1010RDB-PB_NOR_SECBOOT
	P3041DS_SECURE_BOOT
	P4080DS_SECURE_BOOT
	P5020DS_NAND_SECURE_BOOT
	P5040DS_SECURE_BOOT
	T1023RDB_SECURE_BOOT
	T1024QDS_DDR4_SECURE_BOOT
	T1024QDS_SECURE_BOOT
	T1024RDB_SECURE_BOOT
	T1040RDB_SECURE_BOOT
	T1042D4RDB_SECURE_BOOT
	T1042RDB_SECURE_BOOT
	T2080QDS_SECURE_BOOT
	T2080RDB_SECURE_BOOT
	T4160QDS_SECURE_BOOT
	T4240QDS_SECURE_BOOT
	ls1021aqds_nor_SECURE_BOOT
	ls1021atwr_nor_SECURE_BOOT
	ls1043ardb_SECURE_BOOT

For these boards CONFIG_SPL_DM will no-longer be defined in SPL. But since
they apparently don't have an SPL, this should not matter.

Signed-off-by: Simon Glass <sjg@chromium.org>
2016-09-16 17:03:41 -04:00
Simon Glass
b63f8a4336 arm: fsl: Adjust ordering of #ifndef CONFIG_SPL_BUILD
The secure boot header files incorrectly define SPL options only if
CONFIG_SPL_BUILD is defined. This means that the options are only enabled
in an SPL build, and not with a normal 'make xxx_defconfig'. This means
that moveconfig.py cannot work, since it sees the options as disabled even
when they may be manually enabled in an SPL build.

Fix this by changing the order.

Signed-off-by: Simon Glass <sjg@chromium.org>
2016-09-16 17:03:37 -04:00
Hou Zhiqiang
71fe22256c fsl: serdes: ensure accessing the initialized maps of serdes protocol
Up to now, the function is_serdes_configed() doesn't check if the map
of serdes protocol is initialized before accessing it. The function
is_serdes_configed() will get wrong result when it was called before
the serdes protocol maps initialized. As the first element of the map
isn't used for any device, so use it as the flag to indicate if the
map has been initialized.

Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com>
Reviewed-by: York Sun <york.sun@nxp.com>
2016-09-14 14:06:49 -07:00
Joe Hershberger
dfcc496ed7 net: mii: Changes not made by spatch
If the functions passed to the registration function are not in the same
C file (extern) then spatch will not handle the dependent changes.

Make those changes manually.

Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>

For the 4xx related files:
Acked-by: Stefan Roese <sr@denx.de>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2016-08-15 15:29:03 -05:00
Joe Hershberger
875e0bc68a net: mii: Fix changes made by spatch
Some of the changes were a bit too complex.

Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2016-08-15 15:29:03 -05:00
Joe Hershberger
5a49f17481 net: mii: Use spatch to update miiphy_register
Run scripts/coccinelle/net/mdio_register.cocci on the U-Boot code base.

Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2016-08-15 15:26:33 -05:00
Dirk Eibach
54a0eb7a18 ppc4xx: Fix platform support
Commit "ecc3066 Fix board init code to respect the C runtime environment"
broke platform support for ppc4xx.
start.S prepares a stackframe that is later rendered unusable by appending
the reserved space for global data.
Instead the reserved space has to be put first. Then the stackframe can
be pushed.

I can only test the 405EP OCM case. At least all other ppc4xx boards still
build.

Signed-off-by: Dirk Eibach <dirk.eibach@gdsys.cc>
Signed-off-by: Stefan Roese <sr@denx.de>
2016-08-09 09:25:36 +02:00
Masahiro Yamada
bb6b142fc1 treewide: move CONFIG_PHYS_64BIT to Kconfig
We need to ensure that CONFIG_PHYS_64BIT is configured via Kconfig so
that it is always available to the build system.  Otherwise we can run
into cases where we have inconsistent sizes of certain attributes.

Ravi Babu reported offset mismatch of struct dwc3 across files since
commit 95ebc253e6 ("types.h: move and redefine resource_size_t").
Since the commit, resource_addr_t points to phys_addr_t, whose size
is dependent on CONFIG_PHYS_64BIT for ARM architecture.

I tried my best to use "select" where possible (for example, ARMv8
architecture) because I think this kind of option is generally user-
unconfigurable.  However, I see some of PowerPC boards have 36BIT
defconfigs as well as 32BIT ones.  I moved CONFIG_PHYS_64BIT to the
defconfigs for such boards.

CONFIG_36BIT is no longer referenced, so all of the defines were
removed from CONFIG_SYS_EXTRA_OPTIONS.

Fixes: 95ebc253e6 ("types.h: move and redefine resource_size_t")
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reported-by: Ravi Babu <ravibabu@ti.com>
Acked-by: Stefan Roese <sr@denx.de>
Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-by: York Sun <york.sun@nxp.com>
2016-08-05 07:27:25 -04:00
York Sun
f3dbf1f0c9 powerpc/mpc85xx: Update erratum workaround for A006379
Update erratum workaround for A006379 to set register CPCHDBCR0
with value 0x001e0000, replacing the old value 0x003c0000.

Signed-off-by: York Sun <york.sun@nxp.com>
Reported-by: Dave Liu <dave.liu@nxp.com>
2016-08-02 09:43:13 -07:00
Tom Rini
499a950d41 Merge git://git.denx.de/u-boot-mpc86xx 2016-07-26 17:34:51 -04:00
Sumit Garg
69d4b48c84 SECURE_BOOT: Enable SD as a source for bootscript
Add support for reading bootscript and bootscript header from SD. Also
renamed macros *_FLASH to *_DEVICE to represent SD alongwith NAND and
NOR flash.

Reviewed-by: Aneesh Bansal <aneesh.bansal@nxp.com>
Signed-off-by: Sumit Garg <sumit.garg@nxp.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: York Sun <york.sun@nxp.com>
2016-07-26 09:01:43 -07:00
Scott Wood
b60038ccab powerpc/86xx: Pass -mcpu=7400 to GCC
Without this, GCC uses the toolchain default, which may be incompatible
with -maltivec.

Signed-off-by: Scott Wood <oss@buserror.net>
Reviewed-by: York Sun <york.sun@nxp.com>
2016-07-25 12:51:16 -07:00
Sumit Garg
aa36c84edf powerpc/mpc85xx: T104x: Add nand secure boot target
For mpc85xx SoCs, the core begins execution from address 0xFFFFFFFC.
In non-secure boot scenario from NAND, this address will map to CPC
configured as SRAM. But in case of secure boot, this default address
always maps to IBR (Internal Boot ROM).
The IBR code requires that the bootloader(U-boot) must lie in 0 to 3.5G
address space i.e. 0x0 - 0xDFFFFFFF.

For secure boot target from NAND, the text base for SPL is kept same as
non-secure boot target i.e. 0xFFFx_xxxx but the SPL U-boot binary will
be copied to CPC configured as SRAM with address in 0-3.5G(0xBFFC_0000)
As a the virtual and physical address of CPC would be different. The
virtual address 0xFFFx_xxxx needs to be mapped to physical address
0xBFFx_xxxx.

Create a new PBI file to configure CPC as SRAM with address 0xBFFC0000
and update DCFG SCRTACH1 register with location of Header required for
secure boot.

The changes are similar to
commit 467a40dfe3
    powerpc/mpc85xx: SECURE BOOT- NAND secure boot target for P3041

While P3041 has a 1MB CPC and does not require SPL. On T104x, CPC
is only 256K and thus SPL framework is used.
The changes are only applicable for SPL U-Boot running out of CPC SRAM
and not the next level U-Boot loaded on DDR.

Reviewed-by: Ruchika Gupta <ruchika.gupta@nxp.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Aneesh Bansal <aneesh.bansal@nxp.com>
Signed-off-by: Sumit Garg <sumit.garg@nxp.com>
Reviewed-by: York Sun <york.sun@nxp.com>
2016-07-21 11:09:34 -07:00
Sumit Garg
8f01397ba7 powerpc/mpc85xx: SECURE BOOT- Enable chain of trust in SPL
As part of Chain of Trust for Secure boot, the SPL U-Boot will validate
the next level U-boot image. Add a new function spl_validate_uboot to
perform the validation.

Enable hardware crypto operations in SPL using SEC block.
In case of Secure Boot, PAMU is not bypassed. For allowing SEC block
access to CPC configured as SRAM, configure PAMU.

Reviewed-by: Ruchika Gupta <ruchika.gupta@nxp.com>
Signed-off-by: Aneesh Bansal <aneesh.bansal@nxp.com>
Signed-off-by: Sumit Garg <sumit.garg@nxp.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: York Sun <york.sun@nxp.com>
2016-07-21 11:09:23 -07:00
Robert P. J. Day
62a3b7dd08 Various, unrelated tree-wide typo fixes.
Fix a number of typos, including:

     * "compatble" -> "compatible"
     * "eanbeld" -> "enabled"
     * "envrionment" -> "environment"
     * "FTD" -> "FDT" (for "flattened device tree")
     * "ommitted" -> "omitted"
     * "overriden" -> "overridden"
     * "partiton" -> "partition"
     * "propogate" -> "propagate"
     * "resourse" -> "resource"
     * "rest in piece" -> "rest in peace"
     * "suport" -> "support"
     * "varible" -> "variable"

Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca>
2016-07-16 09:43:12 -04:00
Hamish Martin
4b689f02ff dm: gpio: MPC85XX GPIO platform data support
Define a platform data structure for the MPC85XX GPIO driver to allow
use of the driver without device tree. Users should define the GPIO
blocks for their platform like this:
  struct mpc85xx_gpio_plat gpio_blocks[] = {
         {
                 .addr = 0x130000,
                 .ngpios = 32,
         },
         {
                 .addr = 0x131000,
                 .ngpios = 32,
         },
  };

  U_BOOT_DEVICES(my_platform_gpios) = {
         { "gpio_mpc85xx", &gpio_blocks[0] },
         { "gpio_mpc85xx", &gpio_blocks[1] },
  };

This is intended to build upon the recent submission of the base
MPC85XX driver from Mario Six. We need to use that new driver
without dts support and this patch gives us that flexibility.
This has been tested on a Freescale T2080 CPU, although only the first
GPIO block.

Signed-off-by: Hamish Martin <hamish.martin@alliedtelesis.co.nz>
Reviewed-by: Mario Six <mario.six@gdsys.cc>
Tested-by: Mario Six <mario.six@gdsys.cc>
Acked-by: Simon Glass <sjg@chromium.org>
2016-07-11 14:06:44 -06:00
Marek Vasut
12c67d7522 powerpc: mpc85xx: Do not build errata command in SPL
The errata command is useless in SPL, so don't build it. This fixes
multiple build failures on PowerPC.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: York Sun <york.sun@nxp.com>
Fixes: 92623672f9 ("fsl: usb: make errata function common for PPC and ARM")
2016-07-05 17:40:28 +02:00
Robert P. J. Day
25bab53ab2 Remove unneeded remnants of bcopy().
Since bcopy() is no longer used, delete all remaining references to
it.

Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca>
2016-06-06 13:39:18 -04:00
mario.six@gdsys.cc
07d31f8f98 dm: gpio: Add driver for MPC85XX GPIO controller
This patch adds a driver for the built-in GPIO controller of the MPC85XX
SoC (probably supporting other PowerQUICC III SoCs as well).

Each GPIO bank is identified by its own entry in the device tree, i.e.

gpio-controller@fc00 {
      #gpio-cells = <2>;
      compatible = "fsl,pq3-gpio";
      reg = <0xfc00 0x100>
}

By default, each bank is assumed to have 32 GPIOs, but the ngpios
setting is honored, so the number of GPIOs for each bank in configurable
to match the actual GPIO count of the SoC (e.g. the 32/32/23 banks of
the P1022 SoC).

The usual functions of GPIO drivers (setting input/output mode and output
value setting) are supported.

The driver has been tested on MPC85XX, but it is likely that other
PowerQUICC III devices will work as well.

Signed-off-by: Mario Six <mario.six@gdsys.cc>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: York Sun <york.sun@nxp.com>
2016-06-03 22:13:24 -07:00
Robert P. J. Day
b7707b043e arch/powerpc: Simplify some calculations using ARRAY_SIZE() macro.
Replace a number of array length calculations with the ARRAY_SIZE()
macro, for clarity.

Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca>
Reviewed-by: York Sun <york.sun@nxp.com>
2016-06-03 22:13:12 -07:00
Robert P. J. Day
7ffe3cd62e Delete tests of CONFIG_OF_LIBFDT when testing CONFIG_OF_BOARD_SETUP
Since CONFIG_OF_BOARD_SETUP depends on CONFIG_OF_LIBFDT:

  config OF_BOARD_SETUP
          bool "Set up board-specific details in device tree before boot"
          depends on OF_LIBFDT
          ...

remove superfluous tests of CONFIG_OF_LIBFDT when testing for
CONFIG_OF_BOARD_SETUP.

Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca>
[trini: Typo fix: s/ifdefi/ifdef/]
Signed-off-by: Tom Rini <trini@konsulko.com>
2016-05-27 15:41:16 -04:00
Simon Glass
14c67ebaef powerpc: Drop unused code related to generic board
Since generic board init is enabled, this is not used. Drop it.

Signed-off-by: Simon Glass <sjg@chromium.org>
2016-05-27 15:39:54 -04:00
Tom Rini
826d06dbdd Merge branch 'master' of git://git.denx.de/u-boot-mpc85xx 2016-05-25 07:19:31 -04:00
Tom Rini
fc15b9beed Merge branch 'master' of git://git.denx.de/u-boot-fsl-qoriq 2016-05-24 13:42:03 -04:00
Aneesh Bansal
82eda68444 powerpc/mpc85xx: set L2PE in L2CSR0 before enabling L2 cache
While enabling L2 cache, the value of L2PE (L2 cache parity/ECC
error checking enable) must not be changed while the L2 cache is
enabled.
So, L2PE must be set before enabling L2 cache.

Signed-off-by: Aneesh Bansal <aneesh.bansal@nxp.com>
Reviewed-by: York Sun <york.sun@nxp.com>
2016-05-24 10:31:21 -07:00
York Sun
cb1629f91a powerpc: Disable flush or invalidate dcache by range for some SoCs
Commit ac337168a unified functions to flush and invalidate dcache by
range. These two functions were no-op for SoCs other than 4xx and
MPC86xx. Adding these functions seemed to be correct but introduced
issues when the dcache is flushed. While the root cause is under
investigation, disable these functions for affected SoCs so various
drivers can work.

Signed-off-by: York Sun <york.sun@nxp.com>
2016-05-19 10:47:11 -07:00
Alex Porosanu
76394c9c91 crypto/fsl: add support for multiple SEC engines initialization
For SoCs that contain multiple SEC engines, each of them needs
to be initialized (by means of initializing among others the
random number generator).

Signed-off-by: Alex Porosanu <alexandru.porosanu@nxp.com>
Reviewed-by: York Sun <york.sun@nxp.com>
2016-05-18 08:51:46 -07:00
Alex Porosanu
404bf4547e arch/arm, arch/powerpc: add # of SEC engines on the SOC
Some SOCs, specifically the ones in the C29x familiy can have
multiple security engines. This patch adds a system configuration
define which indicates the maximum number of SEC engines that
can be found on a SoC.

Signed-off-by: Alex Porosanu <alexandru.porosanu@nxp.com>
Reviewed-by: York Sun <york.sun@nxp.com>
2016-05-18 08:51:46 -07:00
mario.six@gdsys.cc
dbc82ce31b dm: fsl_i2c: Enable DM for FSL I2C
Signed-off-by: Mario Six <mario.six@gdsys.cc>
2016-05-17 08:28:55 +02:00
mario.six@gdsys.cc
ec2c81c5d4 dm: fsl_i2c: Rename I2C register structure
Signed-off-by: Mario Six <mario.six@gdsys.cc>
2016-05-17 08:28:52 +02:00
Robert P. J. Day
1cc0a9f496 Fix various typos, scattered over the code.
Spelling corrections for (among other things):

* environment
* override
* variable
* ftd (should be "fdt", for flattened device tree)
* embedded
* FTDI
* emulation
* controller
2016-05-05 21:39:26 -04:00
Andreas Bießmann
09c2b8f3e3 Change my mailaddress
I'll switch my mails to my own server, so drop all gmail references.

Signed-off-by: Andreas Bießmann <andreas.devel@googlemail.com>
2016-05-02 18:37:09 -04:00
mario.six@gdsys.cc
5068946120 powerpc: mpc85xx: Enable pre-relocation malloc for MPC85xx
To enable DM on MPC85xx, we need pre-relocation malloc, which is
implemented in this patch.

We also make sure that the IVORs are always 4-aligned on e500 to prevent
alignment exceptions caused by code changes in start.S.

Signed-off-by: Mario Six <mario.six@gdsys.cc>
Cc: York Sun <york.sun@nxp.com>
Cc: Simon Glass <sjg@chromium.org>
Reviewed-by: York Sun <york.sun@nxp.com>
2016-04-08 15:42:10 -07:00