Various, accumulated typos collected from around the tree.

Fix various misspellings of:

 * deprecated
 * partition
 * preceding,preceded
 * preparation
 * its versus it's
 * export
 * existing
 * scenario
 * redundant
 * remaining
 * value
 * architecture

Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca>
Reviewed-by: Jagan Teki <jteki@openedev.com>
Reviewed-by: Stefan Roese <sr@denx.de>
This commit is contained in:
Robert P. J. Day 2016-09-07 14:27:59 -04:00 committed by Tom Rini
parent 81049ba8f4
commit fc0b5948e0
18 changed files with 27 additions and 28 deletions

View file

@ -45,7 +45,7 @@ static inline void *phys_to_virt(unsigned long x)
/*
* Virtual <-> DMA view memory address translations
* Again, these are *only* valid on the kernel direct mapped RAM
* memory. Use of these is *depreciated*.
* memory. Use of these is *deprecated*.
*/
#define virt_to_bus(x) (__virt_to_bus((unsigned long)(x)))
#define bus_to_virt(x) ((void *)(__bus_to_virt((unsigned long)(x))))
@ -127,7 +127,7 @@ static inline void *phys_to_virt(unsigned long x)
#endif
/*
* We should really eliminate virt_to_bus() here - it's depreciated.
* We should really eliminate virt_to_bus() here - it's deprecated.
*/
#define page_to_bus(page) (virt_to_bus(page_address(page)))

View file

@ -132,7 +132,7 @@ struct tag_ramdisk {
/* describes where the compressed ramdisk image lives (virtual address) */
/*
* this one accidentally used virtual addresses - as such,
* its depreciated.
* it's deprecated.
*/
#define ATAG_INITRD 0x54410005

View file

@ -489,7 +489,7 @@ static void dump_spd_ddr_reg(void)
for (i = 0; i < CONFIG_NUM_DDR_CONTROLLERS; i++)
fsl_ddr_get_spd(spd[i], i, CONFIG_DIMM_SLOTS_PER_CTLR);
puts("SPD data of all dimms (zero vaule is omitted)...\n");
puts("SPD data of all dimms (zero value is omitted)...\n");
puts("Byte (hex) ");
k = 1;
for (i = 0; i < CONFIG_NUM_DDR_CONTROLLERS; i++) {
@ -543,7 +543,7 @@ static void dump_spd_ddr_reg(void)
}
}
printf("DDR registers dump for all controllers "
"(zero vaule is omitted)...\n");
"(zero value is omitted)...\n");
puts("Offset (hex) ");
for (i = 0; i < CONFIG_NUM_DDR_CONTROLLERS; i++)
printf(" Base + 0x%04x", (u32)ddr[i] & 0xFFFF);

View file

@ -140,7 +140,7 @@ int board_mmc_init(bd_t *bis)
#ifdef CONFIG_SPL_OS_BOOT
/*
* Do board specific preperation before SPL
* Do board specific preparation before SPL
* Linux boot
*/
void spl_board_prepare_for_linux(void)

View file

@ -157,7 +157,7 @@ int board_eth_init(bd_t *bis)
#ifdef CONFIG_SPL_OS_BOOT
/*
* Do board specific preperation before SPL
* Do board specific preparation before SPL
* Linux boot
*/
void spl_board_prepare_for_linux(void)

View file

@ -15,7 +15,7 @@
*
* The "environment" is stored on external storage as a list of '\0'
* terminated "name=value" strings. The end of the list is marked by
* a double '\0'. The environment is preceeded by a 32 bit CRC over
* a double '\0'. The environment is preceded by a 32 bit CRC over
* the data part and, in case of redundant environment, a byte of
* flags.
*
@ -838,7 +838,7 @@ static int do_env_delete(cmd_tbl_t *cmdtp, int flag,
* With "-c" and size is NOT given, then the export command will
* format the data as currently used for the persistent storage,
* i. e. it will use CONFIG_ENV_SECT_SIZE as output block size and
* prepend a valid CRC32 checksum and, in case of resundant
* prepend a valid CRC32 checksum and, in case of redundant
* environment, a "current" redundancy flag. If size is given, this
* value will be used instead of CONFIG_ENV_SECT_SIZE; again, CRC32
* checksum and redundancy flag will be inserted.
@ -847,12 +847,12 @@ static int do_env_delete(cmd_tbl_t *cmdtp, int flag,
* terminating '\0' byte) will be written; here the optional size
* argument will be used to make sure not to overflow the user
* provided buffer; the command will abort if the size is not
* sufficient. Any remainign space will be '\0' padded.
* sufficient. Any remaining space will be '\0' padded.
*
* On successful return, the variable "filesize" will be set.
* Note that filesize includes the trailing/terminating '\0' byte(s).
*
* Usage szenario: create a text snapshot/backup of the current settings:
* Usage scenario: create a text snapshot/backup of the current settings:
*
* => env export -t 100000
* => era ${backup_addr} +${filesize}
@ -970,7 +970,7 @@ sep_err:
/*
* env import [-d] [-t [-r] | -b | -c] addr [size]
* -d: delete existing environment before importing;
* otherwise overwrite / append to existion definitions
* otherwise overwrite / append to existing definitions
* -t: assume text format; either "size" must be given or the
* text data must be '\0' terminated
* -r: handle CRLF like LF, that means exported variables with

View file

@ -1058,7 +1058,7 @@ void board_init_f(ulong boot_flags)
{
#ifdef CONFIG_SYS_GENERIC_GLOBAL_DATA
/*
* For some archtectures, global data is initialized and used before
* For some architectures, global data is initialized and used before
* calling this function. The data should be preserved. For others,
* CONFIG_SYS_GENERIC_GLOBAL_DATA should be defined and use the stack
* here to host global data until relocation.
@ -1070,7 +1070,7 @@ void board_init_f(ulong boot_flags)
/*
* Clear global data before it is accessed at debug print
* in initcall_run_list. Otherwise the debug print probably
* get the wrong vaule of gd->have_console.
* get the wrong value of gd->have_console.
*/
zero_global_data();
#endif

View file

@ -226,7 +226,7 @@ int env_import(const char *buf, int check)
return 0;
}
/* Emport the environment and generate CRC for it. */
/* Export the environment and generate CRC for it. */
int env_export(env_t *env_out)
{
char *res;

View file

@ -41,7 +41,7 @@
* to the 256 byte-"opcodes" found on the 8086. The table which
* dispatches this is found in the files optab.[ch].
*
* Each opcode proc has a comment preceeding it which gives it's table
* Each opcode proc has a comment preceding it which gives it's table
* address. Several opcodes are missing (undefined) in the table.
*
* Each proc includes information for decoding (DECODE_PRINTF and

View file

@ -41,7 +41,7 @@ uint32_t secmem_set_cmd(uint32_t sec_mem_cmd)
/*!
* CAAM page allocation:
* Allocates a partition from secure memory, with the id
* equal to partion_num. This will de-allocate the page
* equal to partition_num. This will de-allocate the page
* if it is already allocated. The partition will have
* full access permissions. The permissions are set before,
* running a job descriptor. A memory page of secure RAM

View file

@ -1302,7 +1302,7 @@ int ddr3_tip_freq_set(u32 dev_num, enum hws_access_type access_type,
}
if (mem_mask != 0) {
/* motib redundent in KW28 */
/* motib redundant in KW28 */
CHECK_STATUS(ddr3_tip_if_write(dev_num, access_type,
if_id,
CS_ENABLE_REG, 0, 0x8));

View file

@ -899,7 +899,7 @@ static int ppc_4xx_eth_init (struct eth_device *dev, bd_t * bis)
* current transfer) have got the time to arrived before
* netloop calls eth_halt
*/
printf ("About preceeding transfer (eth%d):\n"
printf ("About preceding transfer (eth%d):\n"
"- Sent packet number %d\n"
"- Received packet number %d\n"
"- Handled packet number %d\n",

View file

@ -594,7 +594,7 @@ static int fsl_dspi_claim_bus(struct udevice *dev)
priv = dev_get_priv(bus);
/* processor special prepartion work */
/* processor special preparation work */
cpu_dspi_claim_bus(bus->seq, slave_plat->cs);
/* configure transfer mode */

View file

@ -16,10 +16,9 @@
* shifts the remaining entries to the front. Replacing an entry is a
* combination of deleting the old value and adding the new one.
*
* The environment is preceeded by a 32 bit CRC over the data part.
* The environment is preceded by a 32 bit CRC over the data part.
*
**************************************************************************
*/
*************************************************************************/
#if defined(CONFIG_ENV_IS_IN_FLASH)
# ifndef CONFIG_ENV_ADDR

View file

@ -29,7 +29,7 @@
* 2 data record with 24-bit address
* 3 data record with 32-bit address
* 4 symbol record (LSI extension)
* 5 number of data records in preceeding block
* 5 number of data records in preceding block
* 6 unused
* 7 ending record for S3 records
* 8 ending record for S2 records

View file

@ -499,7 +499,7 @@ int hdelete_r(const char *key, struct hsearch_data *htab, int flag)
*
* If the separator character is different from NUL, then any
* separator characters and backslash characters in the values will
* be escaped by a preceeding backslash in output. This is needed for
* be escaped by a preceding backslash in output. This is needed for
* example to enable multi-line values, especially when the output
* shall later be parsed (for example, for re-import).
*

View file

@ -4263,7 +4263,7 @@ sub process {
}
}
# check for case / default statements not preceeded by break/fallthrough/switch
# check for case / default statements not preceded by break/fallthrough/switch
if ($line =~ /^.\s*(?:case\s+(?:$Ident|$Constant)\s*|default):/) {
my $has_break = 0;
my $has_statement = 0;
@ -4284,7 +4284,7 @@ sub process {
}
if (!$has_break && $has_statement) {
WARN("MISSING_BREAK",
"Possible switch case/default not preceeded by break or fallthrough comment\n" . $herecurr);
"Possible switch case/default not preceded by break or fallthrough comment\n" . $herecurr);
}
}

View file

@ -405,7 +405,7 @@ static int display_fdt_by_regions(struct display_info *disp, const void *blob,
* The output of this function may or may not be a valid FDT. To ensure it
* is, these disp->flags must be set:
*
* FDT_REG_SUPERNODES: ensures that subnodes are preceeded by their
* FDT_REG_SUPERNODES: ensures that subnodes are preceded by their
* parents. Without this option, fragments of subnode data may be
* output without the supernodes above them. This is useful for
* hashing but cannot produce a valid FDT.