Commit graph

1911 commits

Author SHA1 Message Date
Fabien Parent
c69a05d0b9 davinci: omapl138_lcdk: add NAND SPL boot support
NAND SPL boot was missing. Add it. The README specific to omapl138-lcdk
is also removed because its content does not apply anymore, i.e. the
generated AIS image can be flashed directly to the NAND without
using any external tool to create and bootable AIS image.

Signed-off-by: Fabien Parent <fparent@baylibre.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
2016-12-03 13:21:18 -05:00
Fabien Parent
742762bf85 davinci: omapl138_lcdk: add u-boot sector for mmc/sd boot
Set the correct CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR value in order
to be able to boot from MMC/SD.

The SPL is stored at sector 0x75, while u-boot will follow at
sector 0xb5.

Signed-off-by: Fabien Parent <fparent@baylibre.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
2016-12-03 13:21:15 -05:00
Madan Srinivas
998250f784 configs: am43x: hs: Modify SPL load address to fix UART boot issue
An issue in the TI secure image generation tool causes the ROM to
load the SPL at a different load address than what is specified by
CONFIG_ISW_ENTRY_ADDR while doing a peripheral boot.

This causes the SPL to fail on secure devices during peripheral
boot.

The TI secure image generation tool has been fixed so that the SPL
will always be loaded at 0x403018E0 by the ROM code for both
peripheral and memory boot modes. am43x hs defconfig file have been
updated to reflect this change.

Signed-off-by: Madan Srinivas <madans@ti.com>
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2016-12-03 13:21:06 -05:00
Vladimir Zapolskiy
40166c8d1b r2dplus: select rtl8139 driver in defconfig
CONFIG_RTL8139 was moved to a board defconfig by a commit 86e9dc86b1
("net: Move CONFIG_RTL8139 to Kconfig"), however it was done
incorrectly due to a missing CONFIG_NETDEVICES selection, thus
virtually it was just a removal of the driver compilation.

As an unlucky consequence the option was completely removed by a purge
commit adad96e60d ("configs: Re-sync HUSH options"), restore the
driver inclusion back.

Signed-off-by: Vladimir Zapolskiy <vz@mleia.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2016-12-02 21:32:45 -05:00
Sekhar Nori
7e0b87c91a ARM: am57xx_evm: enable DFU support
AM57xx GP EVM has USB2 port of the SoC exposed as
USB client port.

It is useful to be able to use this port for USB
DFU downloads.

Enable USB DFU support. Tested on AM57x GP EVM Rev
A3 using DFU to download to connected SD card.

configs for HS version of the AM57x EVM are
included in the patch but not really tested.

Signed-off-by: Sekhar Nori <nsekhar@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
2016-12-02 21:32:37 -05:00
Chris Packham
eb1f7784f4 mvebu: db-88f6820-amc: Enable FIT support
Signed-off-by: Chris Packham <judge.packham@gmail.com>
Signed-off-by: Stefan Roese <sr@denx.de>
2016-12-01 09:06:17 +01:00
Tom Rini
38c4f0bdce ts4600: Disable CONFIG_DISPLAY_CPUINFO
Without this change we see:
../arch/arm/cpu/arm926ejs/mxs/mxs.c: In function ‘print_cpuinfo’:
../arch/arm/cpu/arm926ejs/mxs/mxs.c:181:23: warning: unused variable ‘data’ [-Wunused-variable]
../arch/arm/cpu/arm926ejs/mxs/mxs.c:180:6: warning: variable ‘cpurev’ set but not used [-Wunused-but-set-variable]

So the easy solution is to disable CONFIG_DISPLAY_CPUINFO

Reviewed-by: Sebastien Bourdelin <sebastien.bourdelin@savoirfairelinux.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
2016-11-30 19:31:18 -05:00
Tom Rini
4d6647ab17 Merge branch 'master' of git://www.denx.de/git/u-boot-imx 2016-11-30 09:57:52 -05:00
Christoph Fritz
730d25443a mx6sx: Add initial support for Samtec VIN|ING 2000 board
This patch adds initial support for Samtec VIN|ING 2000 board.

Signed-off-by: Christoph Fritz <chf.fritz@googlemail.com>
Reviewed-by: Stefano Babic <sbabic@denx.de>
Acked-by: Marek Vasut <marex@denx.de>
2016-11-30 09:54:42 +01:00
Tom Rini
6b29a395b6 Merge git://git.denx.de/u-boot-mpc85xx 2016-11-29 19:42:48 -05:00
Angus Ainslie
9cd37b02a0 imx7: SPI: add suport for SPI flash in mikroBUS slot
Enable the escpi3 nets attached to the mikroBUS slot
on the i.MX7 Sabre evalution board. Also enble the SPI flash
commands to work with the "flash click" board.

This is V2 of this patch with changes recommended by the maintainer

CC: Jagan Teki <jteki@openedev.com>
2016-11-29 17:00:31 +01:00
Breno Lima
792f186846 mx6sx: Add initial support for UDOO Neo Board
UDOO Neo Board is a development board from Seco that has three models:
 - UDOO Neo Basic
 - UDOO Neo Basic Kick Starter
 - UDOO Neo Extended
 - UDOO Neo Full

All versions are based on the i.MX6 SoloX processor.

For more details about the UDOO Neo board, please refer to:
http://www.udoo.org/udoo-neo/

This work is based on a previous commit of Francesco Montefoschi
<francesco.monte@gmail.com>:
877b71184a

Only tested on the UDOO Neo Full board.

Signed-off-by: Breno Lima <breno.lima@nxp.com>
Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
2016-11-29 16:48:20 +01:00
Sebastien Bourdelin
d9e268ed76 ARM: ts4600: add basic board support
This commit adds basic support including:
MMC, Serial console

Signed-off-by: Sebastien Bourdelin <sebastien.bourdelin@savoirfairelinux.com>
Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
2016-11-29 16:45:48 +01:00
Eric Nelson
a425bf7281 ARM: mx6: ddr: use Kconfig for inclusion of DDR calibration routines
The DDR calibration routines are gated by conditionals for the
i.MX6DQ SOCs, but with the use of the sysinfo parameter, these
are usable on at least i.MX6SDL and i.MX6SL variants with DDR3.

Also, since only the Novena board currently uses the dynamic
DDR calibration routines, these routines waste space on other
boards using SPL.

Add a KConfig entry to allow boards to selectively include the
DDR calibration routines.

Signed-off-by: Eric Nelson <eric@nelint.com>
2016-11-29 16:40:37 +01:00
Stefano Babic
2d221489df Merge branch 'master' of git://git.denx.de/u-boot
Signed-off-by: Stefano Babic <sbabic@denx.de>
2016-11-29 16:28:28 +01:00
Fabian Vogt
7670909638 ARM: bcm283x: use OF_CONTROL for bcm283x
This patch removes use of U_BOOT_DEVICE in board/raspberrypi/rpi/rpi.c,
enables OF_CONTROL in the config and adjusts the rpi_*defconfig configs.

Signed-off-by: Fabian Vogt <fvogt@suse.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2016-11-28 20:15:18 -05:00
Stefan Agner
e94793c844 spl: add USB Gadget config option
Introduce USB Gadget config option. This allows to combine Makefile
entries for SPL_USBETH_SUPPORT and SPL_DFU_SUPPORT.

Signed-off-by: Stefan Agner <stefan.agner@toradex.com>
Acked-by: Lukasz Majewski <l.majewski@samsung.com>
Tested-by: Ravi Babu <ravibabu@ti.com>
2016-11-28 19:49:49 -05:00
Marcel Ziswiler
b891d01038 apalis/colibri_imx7/pxa270/t20/t30/vf: integrate config block handling
With our common code in place actually make use of it across all our
modules.

Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Acked-by: Max Krummenacher <max.krummenacher@toradex.com>
2016-11-28 15:10:33 -05:00
Marcel Ziswiler
b05d6806cd apalis/colibri_t20/t30: deactivate displaying board info
Deactivate CONFIG_DISPLAY_BOARDINFO in favour of
CONFIG_DISPLAY_BOARDINFO_LATE which also displays on the LCD.

Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Acked-by: Max Krummenacher <max.krummenacher@toradex.com>
2016-11-28 15:10:32 -05:00
FUKAUMI Naoki
5782954c2b sunxi: add support for Nintendo NES Classic Edition
Add board support for sun8i_r16 Nintendo NES Classic edition.

Signed-off-by: FUKAUMI Naoki <naobsd@gmail.com>
[jagan: Add commit message body]
Signed-off-by: Jagan Teki <jagan@openedev.com>
Reviewed-by: Jagan Teki <jagan@openedev.com>
2016-11-28 15:10:30 -05:00
Hans de Goede
4c6a43de5a sunxi: Mele_M5_defconfig: Drop non existing STATUSLED setting
And also remove it from scripts/config_whitelist.txt as the
Mele_M5_defconfig was the only one defining it.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Ian Campbell <ijc@hellion.org.uk>
Reviewed-by: Jagan Teki <jagan@openedev.com>
2016-11-28 15:10:29 -05:00
Jelle van der Waa
52401231fd sunxi: Use the available Kconfig option for AHCI
Use the already available Kconfig option for AHCI. Tested on the
BananaPi.

Signed-off-by: Jelle van der Waa <jelle@vdwaa.nl>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2016-11-28 15:10:27 -05:00
Alexander Graf
95b62b2e28 efi_loader: Allow to compile helloworld.efi w/o bundling it
Today we can compile a self-contained hello world efi test binary that
allows us to quickly verify whether the EFI loader framwork works.

We can use that binary outside of the self-contained test case though,
by providing it to a to-be-tested system via tftp.

This patch separates compilation of the helloworld.efi file from
including it in the u-boot binary for "bootefi hello". It also modifies
the efi_loader test case to enable travis to pick up the compiled file.
Because we're now no longer bloating the resulting u-boot binary, we
can enable compilation always, giving us good travis test coverage.

Signed-off-by: Alexander Graf <agraf@suse.de>
Reviewed-by: Tom Rini <trini@konsulko.com>
2016-11-27 09:53:39 -05:00
Tom Rini
8d0898544e Merge git://git.denx.de/u-boot-rockchip 2016-11-26 09:26:27 -05:00
Simon Glass
c420ef67e5 rockchip: Add support for veyron-minnie (ASUS Chromebook Flip)
This adds support for the Asus Chromebook Flip, an RK3288-based clamshell
device which can flip into 'tablet' mode. The device tree file comes from
Linux v4.8. The SDRAM parameters are for 4GB Samsung LPDDR3.

Signed-off-by: Simon Glass <sjg@chromium.org>
2016-11-25 17:59:32 -07:00
Simon Glass
e70408c069 rockchip: Add support for veyron-mickey (Chromebit)
This adds support for the Asus Chromebit, and RK3288-based device designed
to plug directly into an HDMI monitor. The device tree file comes from
Linux v4.8.

Signed-off-by: Simon Glass <sjg@chromium.org>
2016-11-25 17:59:32 -07:00
Simon Glass
5e9b15034b rockchip: Rename jerry files to veyron
At present we have a single rk3288-based Chromebook: chromebook_jerry. But
all such Chromebooks can use the same binary with only device-tree
differences. The family name is 'veyron', so rename the files accordingly.

Also update the device-tree filename since this currently differs from
Linux.

Signed-off-by: Simon Glass <sjg@chromium.org>
2016-11-25 17:59:31 -07:00
Simon Glass
57db8c6d87 rockchip: Move jerry to use of-platdata
Adjust jerry to use of-platdata like other rk3288 boards. This reduces the
SPL size enough that it boots again.

Signed-off-by: Simon Glass <sjg@chromium.org>
2016-11-25 17:59:31 -07:00
Kever Yang
c70956052a config: rk3036: enable fix regulator
usb host vbus power is using gpio fix regulator, enable it.

Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
Acked-by: Simon Glass <sjg@chromium.org>
2016-11-25 17:59:29 -07:00
Kever Yang
1e352124b9 config: rk3036: enable configs for USB HOST
rk3036 using dwc2 usb controller, need enable relate configs for it.

Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
Acked-by: Simon Glass <sjg@chromium.org>
2016-11-25 17:59:29 -07:00
Kever Yang
0dffb28107 config: evb-rk3399: enable PWM_ROCKCHIP
PWM_ROCKCHIP need to enable for PWM regulator, this config
is missing during rebase and new patch set in previous submission.

Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
Acked-by: Simon Glass <sjg@chromium.org>
2016-11-25 17:59:29 -07:00
Tom Rini
ed77ccd014 Merge git://git.denx.de/u-boot-fsl-qoriq
Signed-off-by: Tom Rini <trini@konsulko.com>

Conflicts:
	arch/arm/Kconfig
2016-11-25 17:39:54 -05:00
York Sun
26bc57da0a powerpc: T4240: Remove macro CONFIG_PPC_T4240
Use CONFIG_ARCH_T4240 from Kconfig instead.

Signed-off-by: York Sun <york.sun@nxp.com>
2016-11-23 23:42:15 -08:00
York Sun
652a7bbd87 powerpc: T4160: Remove macro CONFIG_PPC_T4160
Use CONFIG_ARCH_T4160 instead.

Signed-off-by: York Sun <york.sun@nxp.com>
2016-11-23 23:42:15 -08:00
York Sun
12ffdb3b12 powerpc: T4160RDB: Separate from T4240RDB in Kconfig
Use TARGET_T4160RDB to simplify Kconfig options.

Signed-off-by: York Sun <york.sun@nxp.com>
2016-11-23 23:42:15 -08:00
York Sun
9c21d06c67 powerpc: T4160QDS: Separate from T4240QDS in Kconfig
Use TARGET_T4160QDS to simplify Kconfig options.

Signed-off-by: York Sun <york.sun@nxp.com>
2016-11-23 23:42:15 -08:00
York Sun
0f3d80e993 powerpc: T2080, T2081: Remove macro CONFIG_PPC_T2080 and CONFIG_PPC_T2081
Use CONFIG_ARCH_T2080 and CONFIG_ARCH_T2081 instead.

Signed-off-by: York Sun <york.sun@nxp.com>
2016-11-23 23:42:15 -08:00
York Sun
01671e668b powerpc: T2080RDB: Rename from T208XRDB in Kconfig
T208XRDB only has one target T2080RDB. Use TARGET_T2080RDB in Kconfig
and clean up existing macros.

Signed-off-by: York Sun <york.sun@nxp.com>
2016-11-23 23:42:14 -08:00
York Sun
638d5be055 powerpc: T208XQDS: Split as T2080QDS and T2081QDS
Use two separated targets in Kconfig to simplify configurations.

Signed-off-by: York Sun <york.sun@nxp.com>
2016-11-23 23:42:14 -08:00
York Sun
78e5699523 powerpc: T104xRDB: Remove macro CONFIG_T104xRDB and T104xD4RDB
CONFIG_T104xRDB is defined in T104xRDB.h, so it is always enabled for
all T1040RDB, T1040D4RDB, T1042RDB, T1042D4RDB, T1042RDB_PI.
CONFIG_T104XD4RDB is defined for all T1040D4RDB, T1042D4RDB.

Signed-off-by: York Sun <york.sun@nxp.com>
2016-11-23 23:42:14 -08:00
York Sun
0167369cff powerpc: T1042RDB: Remove macro CONFIG_T1042RDB
Use TARGET_T1042RDB instead.

Signed-off-by: York Sun <york.sun@nxp.com>
2016-11-23 23:42:14 -08:00
York Sun
319ed24a8a powerpc: T1042D4RDB: Separate from T1042RDB in Kconfig
Use TARGET_T1042D4RDB in Kconfig to simplify config options.
Remove macro CONFIG_T1042D4RDB.

Signed-off-by: York Sun <york.sun@nxp.com>
2016-11-23 23:42:14 -08:00
York Sun
55ed8ae367 powerpc: T1042RDB_PI: Split from T1042RDB in Kconfig
Use separated TARGET_T1042RDB_PI to simplify config options.
Remove macro CONFIG_T1042RDB_PI.

Signed-off-by: York Sun <york.sun@nxp.com>
2016-11-23 23:42:14 -08:00
York Sun
5449c98a2d powerpc: T1042: Remove macro CONFIG_PPC_T1042
Replace CONFIG_PPC_T1042 with ARCH_T1024 in Kconfig and clean up
existing macros.

Signed-off-by: York Sun <york.sun@nxp.com>
2016-11-23 23:42:13 -08:00
York Sun
6fcddd0985 powerpc: T1040RDB: Remove macro CONFIG_T1040RDB
Use CONFIG_TARGET_T1040RDB instead.

Signed-off-by: York Sun <york.sun@nxp.com>
2016-11-23 23:42:13 -08:00
York Sun
a016735c79 powerpc: T1040D4RDB: Separate from T1040RDB in Kconfig
Use TARGET_T1040D4RDB in Kconfig to simplify config macros. Replace
CONFIG_T1040D4RDB with TARGET_T1040D4RDB and clean up existing macros.

Signed-off-by: York Sun <york.sun@nxp.com>
2016-11-23 23:42:13 -08:00
York Sun
5d73701073 powerpc: T1040: Remove macro CONFIG_PPC_T1040
Replace CONFIG_PPC_T1040 with ARCH_T1040 in Kconfig and clean up
existing macros.

Signed-off-by: York Sun <york.sun@nxp.com>
2016-11-23 23:42:13 -08:00
York Sun
95a809b918 powerpc: T104XRDB: Split to T1040RDB and T1042RDB in Kconfig
Split ARCH_T104XRDB as ARCH_T1040RDB and ARCH_T1042RDB in Kconfig to
simplify config options.

Signed-off-by: York Sun <york.sun@nxp.com>
2016-11-23 23:42:13 -08:00
York Sun
e5d5f5a8be powerpc: T1024: Remove macro CONFIG_PPC_T1024
Replace CONFIG_PPC_T1024 with ARCH_T1024 in Kconfig and clean up
existing macros.

Signed-off-by: York Sun <york.sun@nxp.com>
2016-11-23 23:42:13 -08:00
York Sun
6f53bd475a powerpc: T1024QDS: Rename Kconfig option to match the name
Rename TARGET_T102XQDS to TARGET_T1024QDS to match the name.

Signed-off-by: York Sun <york.sun@nxp.com>
2016-11-23 23:42:13 -08:00