Commit graph

1686 commits

Author SHA1 Message Date
Marek Vasut
1335e7745f usb: ehci: Add PHY support to ehci-pci
Add support for operating a PHY attached to ehci-pci. There are
systems where the EHCI controller is internally wired to a PCI
bus and has a PHY connected to it as well, ie. the R-Car Gen2.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
2018-08-28 11:00:19 +02:00
Marek Vasut
b43cdf9b3f usb: ehci: Make the PHY handling generic
Pull out the EHCI PHY functions into the ehci-hcd.c to let other
EHCI drivers use them.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
2018-08-28 11:00:18 +02:00
Tom Rini
15fd1b7903 Merge branch 'master' of git://git.denx.de/u-boot-usb 2018-08-24 16:11:01 -04:00
Jagan Teki
12069bd046 usb: musb-new: Call musb_platform_exit from musb_stop
musb stop is musb core call during unregister or shutting down
gadget or host musb. For graceful exit add musb_platform_exit
on musb_stop so-that it can exit the musb platform driver as well.

Tested-by: Chen-Yu Tsai <wens@csie.org> # A33-OlinuXino
Tested-by: Jagan Teki <jagan@amarulasolutions.com>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2018-08-23 17:31:24 +05:30
Jagan Teki
14b6a07cf7 usb: musb-new: sunxi: Add proper musb exit support
musb have platform ops to do proper graceful exit,
so add the exit call and move musb platform exit code
instead of keeping it in driver remove.
This make proper shutdown of musb where .remove will
call disable, exit serially via musb_stop.

Tested-by: Chen-Yu Tsai <wens@csie.org> # A33-OlinuXino
Tested-by: Jagan Teki <jagan@amarulasolutions.com>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2018-08-23 17:31:24 +05:30
Jagan Teki
1034bcc26d musb-new: sunxi: Access ahb_reset0_cfg via ccm offset
reset0 is not available for sun4i, 5i and 7i so access
the reset0 offset from ccm via driver data for relevant
Allwinner SoC. this will eventually drop the existing
ifdef for SUN6I.

Tested-by: Chen-Yu Tsai <wens@csie.org> # A33-OlinuXino
Tested-by: Jagan Teki <jagan@amarulasolutions.com>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2018-08-23 17:31:24 +05:30
Jagan Teki
622fd2b98c usb: musb-new: sunxi: Allocate struct phy in private
Allocate struct phy in private structure instead of allocating
locally and assign it to a pointer. This eventually fix miss
alignment phy which is used in another functions.

Tested-by: Chen-Yu Tsai <wens@csie.org> # A33-OlinuXino
Tested-by: Jagan Teki <jagan@amarulasolutions.com>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2018-08-23 17:31:24 +05:30
Jagan Teki
8b8d59f323 usb: musb-new: Fix improper musb host pointer
When MUSB is operating in peripheral mode, probe registering
musb core using musb_register which intern return int value
for validation. so there is no scope to preserve struct musb
pointer but the same can be used in .remove musb_stop.
So fix this by return musb_register with struct musb pointer.

Cc: Igor Grinberg <grinberg@compulab.co.il>
Cc: Purna Chandra Mandal <purna.mandal@microchip.com>
Tested-by: Chen-Yu Tsai <wens@csie.org> # A33-OlinuXino
Tested-by: Jagan Teki <jagan@amarulasolutions.com>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2018-08-23 17:31:24 +05:30
Jean-Jacques Hiblot
c73251eac1 usb: gadget: Add bcdDevice for the DWC3 USB Gadget Controller
Add an entry in usb_gadget_controller_number() for the DWC3 gadget
controller. Without it, it is not possible to bind the USB Ethernet driver.

Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
2018-08-21 16:21:37 +02:00
Adam Ford
1a35526e1d usb: musb-new: omap2430: Enable DM_USB and OF support
With upcoming changes that require CONFIG_BLK, this broke
USB Mass Storage on the OMAP3 boards because if CONFIG_BLK is
enabled, it assumes that DM_USB is enabled, but it wasn't yet
available on omap3 and omap4 boards.

This patch converts the OMAP2430 MUSB glue to support DM_USB and
extracts the necessary information based on the device tree.

It's based on the ti-musb driver, but there are enough significant
differences in both the architecture and device tree entires between
am33xx and OMAP3/OMAP4, that I think it makes sense to continue to
keep the separate.

Per doc/driver-model/usb-info.txt, the USB gadget stuff hasn't
migrated to DM_USB yet, so this only supports USB Host for now.

Users wanting USB Gadgets will need to disable DM_USB and leave
it the old way for now.

Signed-off-by: Adam Ford <aford173@gmail.com>
2018-08-21 16:21:37 +02:00
Adam Ford
10d5ed9a54 usb: musb-new: omap2430: Remove dead code
A bunch of code was encapsulated in #ifdef's whether or not
it is building or for U-Boot.  Since this code is always building
for U-Boot, this patch removes the dead code.

Signed-off-by: Adam Ford <aford173@gmail.com>
2018-08-21 16:21:37 +02:00
Tom Rini
cdec3ea7e4 Merge branch 'master' of git://git.denx.de/u-boot-usb 2018-08-10 07:21:02 -04:00
Alberto Panizzo
92c7edae5e usb: rockchip: on K_FW_LBA_WRITE_10 remove magic block size of 512 bytes
As well as in K_FW_LBA_READ_10 and K_FW_LBA_ERASE_10 take device's
block size from f_rkusb->desc->blksz instead of the fixed 512 bytes.

Keep original behaviour of retry probing assigned block device on
every host request to manage late SDCard plugs.

Signed-off-by: Alberto Panizzo <alberto@amarulasolutions.com>
2018-08-08 22:22:08 +02:00
Alberto Panizzo
4f6dc4c893 usb: rockchip: fix printing csw debug info
Workstation tool was happy while console on device were printing
random numbers..

Signed-off-by: Alberto Panizzo <alberto@amarulasolutions.com>
2018-08-08 22:22:07 +02:00
Alberto Panizzo
11758a56ab usb: rockchip: be quiet on serial port while transferring data
While downloading or uploading megabytes of data we had thousands of
printf in console like:

transfer 0x10000 bytes done
OR
Uploading 0x1000 bytes

This because transfers are chunked and there is no way on target
side to know the overall transfer size (to print one string per
overall transfer).

All these prints on serial console do slow down significantly the
transfer and does not offer a significant information to the
developer: rkdeveloptool and Rockchip original tool do use small
chunks read/writes on big transfers. This allows on workstation
to print percentage of transfer complete and as well offers to
developer the information about: transfer is running OK.
On error, either the percentage will stop or an error will be shown
on workstation console.

Signed-off-by: Alberto Panizzo <alberto@amarulasolutions.com>
2018-08-08 22:22:07 +02:00
Alberto Panizzo
f68c8e827c usb: rockchip: implement K_FW_LBA_ERASE_10 command
This command is part of the write partition sequence performed by
rkdeveloptool: one partition is first completely erased and
than wrote.

Signed-off-by: Alberto Panizzo <alberto@amarulasolutions.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2018-08-08 22:22:07 +02:00
Alberto Panizzo
e11f9166f3 usb: rockchip: implement K_FW_LBA_READ_10 command
This patch implement reading blocks form selected device with
LBA addressing.

Corresponding command on workstation is:
rkdeveloptool rl <start_blk> <blk_cnt> <file>

While we support reading more than one blocks per K_FW_LBA_READ_10
request, rkdeveloptool and original rockchip tool do perform
chunk reads limiting the maximum size per chunk far lower
than max int values.

Signed-off-by: Alberto Panizzo <alberto@amarulasolutions.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2018-08-08 22:22:07 +02:00
Alberto Panizzo
e4b34a7634 usb: rockchip: implement skeleton for K_FW_GET_CHIP_VER command
Chip Version is a string saved in BOOTROM address space Little Endian.

Ex for rk3288: 0x33323041 0x32303134 0x30383133 0x56323030
which brings:  320A20140813V200

Note that memory version do invert MSB/LSB so printing the char
buffer would show: A02341023180002V

Signed-off-by: Alberto Panizzo <alberto@amarulasolutions.com>
2018-08-08 22:22:07 +02:00
Alberto Panizzo
cad66e324d usb: rockchip: fix command failed on host side due to missing data
Two consecutive rockusb_tx_write without waiting for request complete
do results in transfer reset of first request and thus no or incomplete
data transfer. This because rockusb_tx_write do use just one USB request
to keep serialization.

So calls like:
rockusb_tx_write_str(emmc_id);
rockusb_tx_write_csw(cbw->tag, cbw->data_transfer_length, CSW_GOOD);

was succeeding only when DEBUG was defined because the time spent
printing debug info was enough for transfer to complete.

This patch fixes the issue adding a simple request complete handler
called rockusb_tx_write_csw to be set as complete handler of in_req
when sending back simple payload + CSW replies to commands.

This new handler will always send CSW_GOOD replies because in case
of error the command callback itself must send back an error CSW as
unique reply to command.

This patch fixes execution of:
$ rkdeveloptool rfi
when DEBUG is not defined.

Signed-off-by: Alberto Panizzo <alberto@amarulasolutions.com>
2018-08-08 22:22:07 +02:00
Seung-Woo Kim
c194bdf226 gadget: f_thor: fix hang-up with ctrl-c
After the commit 6aae84769a ("gadget: f_thor: Fix memory leaks of
usb request and its buffer"), there is hang-up with ctrl-c in some
udc. It is because req of out_ep is freed before out_ep is disabled.
Fix hang-up with ctrl-c by disabling ep before free req of the ep.

Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com>
2018-08-08 22:22:07 +02:00
Tom Rini
481ea2e39d mips: au1x00: Remove support for these SoCs
The only platform left for the AU1x00 SoCs was the pb1x00 platform, an
apparent clone of the dbau1x00 platform.  As pb1x00 had no listed
maintainer I am assuming that it is also orphaned.  Remove this platform
and then remove the unused SoC support.

Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2018-08-08 13:34:27 +02:00
Andre Przywara
0bc846a769 sunxi: A64: OHCI: prevent turning off shared USB clock
On the A64 the clock for the first USB controller is actually the parent
of the clock for the second controller, so turning them off in that order
makes the system hang.
Fix this by only turning off *both* clocks when the *last* OHCI controller
is brought down. This covers the case when only one controller is used.

Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2018-07-05 11:25:50 +02:00
Emmanuel Vadot
ff5d5cc233 usb: dwc2: Add brcm,bcm2708-usb compatible
When using CONFIG_OF_BOARD on rpi to use the dtb provided by the
RaspberryPi Fundation, the compatible string isn't the same, resulting
in not-functional usb from u-boot.

Signed-off-by: Oleksandr Tymoshenko <gonzo@FreeBSD.org>
Signed-off-by: Emmanuel Vadot <manu@freebsd.org>
2018-07-05 11:25:49 +02:00
Jagan Teki
9c22aec410 usb: sunxi: Use proper reg_mask for clock gate, reset
Masking clock gate, reset register bits based on the
probed controller is proper only due to the assumption
that masking should start with 0 even thought the controller
has separate PHY or shared between OTG.

unfortunately these are fixed due to lack of separate
clock, reset drivers.

Say for example EHCI1 - EHCI3 in the datasheet (EHCI0 is for the OTG)
so we need to start reg_mask 0 - 2.

This patch calculated the mask, based on the register base
so that we can get the proper bits to set with respect to
probed controller.

We even do this masking by using PHY index specifier from dt,
but dev_read_addr_size is failing for 64-bit boards.

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2018-06-29 10:52:18 +02:00
Zeng Tao
11080bf6c7 usb: ohci: change the NUM_EDs from 8 to 32
For ohci, the maximam supported endpoint number is 32(in and out), and
now we have used (usb_pipeendpoint(pipe) << 1) to index the specified
endpoint descritor, usb_pipeendpoint(pipe) can reach 0xf, so we need
change the NUM_EDs from 8 to 32.

Signed-off-by: Zeng Tao <prime.zeng@hisilicon.com>
2018-06-29 10:52:12 +02:00
Vasily Khoruzhick
ebbc23a049 usb: sunxi: ohci: make ohci_t the first member in private data
ohci-hcd casts priv_data pointer to (ohci_t *), thus it must be
the first member in private data struct.

Fixes 831cc98b1 ("usb: sunxi: Simplify ccm reg base code")

Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com>
2018-06-29 10:52:07 +02:00
Andrew Thomas
af15946aa0 dwc2 USB controller hangs with lan78xx
This bug is the combination of dwc2 USB controller and lan78xx
USB ethernet controller, which is the combination in use on
the Raspberry Pi Model 3 B+.

When the host attempts to receive a packet, but a packet has not
arrived, the lan78xx controller responds by setting BIR
(Bulk-In Empty Response) to NAK. Unfortunately, this hangs
the USB controller and requires the USB controller to
be reset.

The fix proposed is to have the lan78xx controller respond
by setting BIR to ZLP.

Signed-off-by: Andrew Thomas <andrew.thomas@oracle.com>
Tested-by: Peter Robinson <pbrobinson@gmail.com>
Reviewed-by: Alexander Graf <agraf@suse.de>
2018-06-27 22:21:25 -04:00
Tom Rini
a715415bb5 Merge branch 'master' of git://git.denx.de/u-boot-usb 2018-06-16 00:07:37 -04:00
Vasily Khoruzhick
b9f34757db usb: sunxi: access ahb_reset0_cfg in CCM using its offset
struct sunxi_ccm_reg doesn't have ahb_reset0_cfg on sun4i and sun5i,
thus compilation fails with:

drivers/usb/host/ohci-sunxi.c:96:26: error: 'struct sunxi_ccm_reg' has
no member named 'ahb_reset0_cfg'

Access this reg using its offset to fix this issue.

Fixes commit 1ed9c1118 ("usb: sunxi: ehci: get rid of ifdefs")
and commit 56830cee3 ("usb: sunxi: ohci: get rid of ifdefs")

Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com>
2018-06-14 12:57:19 +02:00
Tom Rini
66398944f5 Merge git://git.denx.de/u-boot-x86 2018-06-13 11:43:59 -04:00
Alexey Brodkin
f8c987f8f1 lib: Add hexdump
Often during debugging session it's very interesting to see
what data we were dealing with. For example what we write or read
to/from memory or peripherals.

This change introduces functions that allow to dump binary
data with one simple function invocation like:
------------------->8----------------
print_hex_dump_bytes("", DUMP_PREFIX_OFFSET, buf, len);
------------------->8----------------

which gives us the following:
------------------->8----------------
00000000: f2 b7 c9 88 62 61 75 64 72 61 74 65 3d 31 31 35  ....baudrate=115
00000010: 32 30 30 00 62 6f 6f 74 61 72 67 73 3d 63 6f 6e  200.bootargs=con
00000020: 73 6f 6c 65 3d 74 74 79 53 33 2c 31 31 35 32 30  sole=ttyS3,11520
00000030: 30 6e 38 00 62 6f 6f 74 64 65 6c 61 79 3d 33 00  0n8.bootdelay=3.
00000040: 62 6f 6f 74 66 69 6c 65 3d 75 49 6d 61 67 65 00  bootfile=uImage.
00000050: 66 64 74 63 6f 6e 74 72 6f 6c 61 64 64 72 3d 39  fdtcontroladdr=9
00000060: 66 66 62 31 62 61 30 00 6c 6f 61 64 61 64 64 72  ffb1ba0.loadaddr
00000070: 3d 30 78 38 32 30 30 30 30 30 30 00 73 74 64 65  =0x82000000.stde
00000080: 72 72 3d 73 65 72 69 61 6c 30 40 65 30 30 32 32  rr=serial0@e0022
00000090: 30 30 30 00 73 74 64 69 6e 3d 73 65 72 69 61 6c  000.stdin=serial
000000a0: 30 40 65 30 30 32 32 30 30 30 00 73 74 64 6f 75  0@e0022000.stdou
000000b0: 74 3d 73 65 72 69 61 6c 30 40 65 30 30 32 32 30  t=serial0@e00220
000000c0: 30 30 00 00 00 00 00 00 00 00 00 00 00 00 00 00  00..............
...
------------------->8----------------

Source of hexdump.c was copied from Linux kernel v4.7-rc2.

Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Cc: Anatolij Gustschin <agust@denx.de>
Cc: Mario Six <mario.six@gdsys.cc>
Cc: Simon Glass <sjg@chromium.org>
Cc: Tom Rini <trini@konsulko.com>
Cc: Stefan Roese <sr@denx.de>
2018-06-13 07:49:12 -04:00
Vasily Khoruzhick
11bb62768d usb: sunxi: sun50i: enable OHCI0 clock when OHCI1 is in use
On A64 OHCI1 clock source is OHCI0 clock, so we need to enable OHCI0
clock when OHCI1 is in use.

Fixes commit dd3228170a ("usb: sunxi: Switch to use generic-phy")

Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com>
2018-06-13 07:33:42 +02:00
Vasily Khoruzhick
56830cee3a usb: sunxi: ohci: get rid of ifdefs
We can use compatibles instead.

Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com>
2018-06-13 07:33:42 +02:00
Vasily Khoruzhick
1ed9c11188 usb: sunxi: ehci: get rid of ifdefs
We can use compatibles instead.

Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com>
2018-06-13 07:33:42 +02:00
Bin Meng
9fddf6c7dd usb: xhci-pci: Fix compiler warning
This fixes the following compiler warning:

  "warning: cast from pointer to integer of different size
  [-Wpointer-to-int-cast]"

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2018-06-13 09:50:57 +08:00
Ramon Fried
948f32c856 bug.h: introduce WARN_ONCE
Add WARN_ONCE definition to allow single time notification
of warnings to the user.
Taken from Linux kernel (4.17) with slight changes
(Removed __section(.data.once))

Signed-off-by: Ramon Fried <ramon.fried@gmail.com>
[trini: Drop the musb and dwc3 compat versions]
Signed-off-by: Tom Rini <trini@konsulko.com>
2018-06-07 17:08:06 -04:00
Tom Rini
809e0e398a Merge branch 'master' of git://git.denx.de/u-boot-sunxi 2018-06-04 08:55:00 -04:00
Tom Rini
582d97b6d3 Xilinx changes for v2018.07 second pull
zynqmp:
 - Show reset reason
 - Remove emulation platform
 - Update pmufw version
 - Simplify mmc bootmode
 - Remove dc2 useless configuration file
 - Cleanup mini config
 - Defconfig syncup
 - zcu100, zcu104 and zcu111 dts fixes
 
 xilinx:
 - Use live-tree functions in some drivers
 - Add support for Avnet Minized and Antminer S9
 
 fpga:
 - Add secure bitstream loading support
 
 mmc:
 - Add hs200 mode support
 
 usb xhci:
 - Header fix
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iEYEABECAAYFAlsRRy4ACgkQykllyylKDCEovgCdGWsr4XFQfDZxCEMmsg2vyJF2
 0egAnj6Td1k6yTzQPDXwCtExZJfS/vgl
 =QxUz
 -----END PGP SIGNATURE-----

Merge tag 'xilinx-for-v2018.07-2' of git://www.denx.de/git/u-boot-microblaze

Xilinx changes for v2018.07 second pull

zynqmp:
- Show reset reason
- Remove emulation platform
- Update pmufw version
- Simplify mmc bootmode
- Remove dc2 useless configuration file
- Cleanup mini config
- Defconfig syncup
- zcu100, zcu104 and zcu111 dts fixes

xilinx:
- Use live-tree functions in some drivers
- Add support for Avnet Minized and Antminer S9

fpga:
- Add secure bitstream loading support

mmc:
- Add hs200 mode support

usb xhci:
- Header fix
2018-06-01 13:50:15 -04:00
Michal Simek
b168591c89 usb: xhci: zynqmp: Fix header location
There is no reason to specify header with full soc name.
Symlink is setup automatically (arch -> arch-zynqmp)

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-05-31 13:50:39 +02:00
Alex Kiernan
65c96757fe usb: fastboot: Convert USB f_fastboot to shared fastboot
Convert USB fastboot code to use shared fastboot protocol.

Signed-off-by: Alex Kiernan <alex.kiernan@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2018-05-30 11:59:21 +02:00
Alex Kiernan
d1a119d4f0 fastboot: Rename public fb_ functions to fastboot_
Rename fb_mmc_flash_write/fb_mmc_erase/fb_nand_flash_write/fb_nand_erase to
fastboot_... as they form a public interface

Signed-off-by: Alex Kiernan <alex.kiernan@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2018-05-30 11:59:21 +02:00
Alex Kiernan
1a28d38c39 fastboot: Extract common definitions from USB fastboot
Move FASTBOOT_VERSION to include/fastboot.h so when we merge the UDP code
we only have one definition.

Signed-off-by: Alex Kiernan <alex.kiernan@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2018-05-30 11:59:21 +02:00
Alex Kiernan
8a65bd6372 fastboot: Rename fb_set_reboot_flag to fastboot_set_reboot_flag
Rename fb_set_reboot_flag to fastboot_set_reboot_flag so it matches
all other fastboot code in the global name space. Fix the guards around
them so that they're dependent on FASTBOOT, not just USB_FUNCTION_FASTBOOT.

Move the weak implementation of fastboot_set_reboot_flag to fb_common.c
so we can call it from non-USB fastboot code.

Signed-off-by: Alex Kiernan <alex.kiernan@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2018-05-30 11:59:21 +02:00
Alex Kiernan
42d8dd4424 fastboot: Correct dependencies in FASTBOOT_FLASH
Ensure that when selecting FASTBOOT_FLASH you end up with a buildable
configuration. Prior to this you could select NAND without MTDPARTS
and end up with an image which (surprisingly) excluded NAND.

Also fix dependencies on FASTBOOT_GPT_NAME/FASTBOOT_MBR_NAME which require
you have EFI_PARTITION/DOS_PARTITION enabled.

Delete redundant FASTBOOT_FLASH_NAND_DEV from Kconfig - it was only ever
used as a guard and the value was ignored in all cases, we're using
FASTBOOT_FLASH_NAND as the guard now.

Signed-off-by: Alex Kiernan <alex.kiernan@gmail.com>
Reviewed-by: Joe Hershberger <joe.hershberger@ni.com>
2018-05-30 11:59:21 +02:00
Alex Kiernan
d2df2abbcd fastboot: Extract fastboot_okay/fail to fb_common.c
Add drivers/fastboot/fb_common.c, where fastboot_okay/fail are implemented
so we can call them from a non-USB implementation.

Introduce fastboot_response which takes varargs parameters so we can
use it to generate formatted response strings. Refactor fastboot_okay/fail
to use it.

Signed-off-by: Alex Kiernan <alex.kiernan@gmail.com>
Reviewed-by: Joe Hershberger <joe.hershberger@ni.com>
2018-05-30 11:59:21 +02:00
Alex Kiernan
c4ded03ef6 fastboot: Refactor fastboot_okay/fail to take response
Add the response string as a parameter to fastboot_okay/fail, instead
of modifying a global, to match the contract expected by the AOSP
U-Boot code.

Signed-off-by: Alex Kiernan <alex.kiernan@gmail.com>
Reviewed-by: Joe Hershberger <joe.hershberger@ni.com>
2018-05-30 11:59:21 +02:00
Seung-Woo Kim
6aae84769a gadget: f_thor: Fix memory leaks of usb request and its buffer
There are memory leaks of usb request and its buffer for ep0,
in_ep, and out ep. Fix memory leaks of usb request and its buffer.

Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com>
2018-05-30 11:59:21 +02:00
Philipp Tomsich
afa314d3a3 rockchip: xhci: remove DTS parsing for PHY (which is unused)
The xhci wrapper-driver for Rockchip searches the DTS to find its
child node compatbile with 'rockchip,rk3399-usb3-phy' to retrieve the
base-address of the PHY.  However, this is currently broken (and
always has been), returning NULL.  However, the (wrongly) retrieved
base-address is never used.

We thus remove this code for now.

Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2018-05-30 11:59:10 +02:00
Bin Meng
e40406603f usb: xhci: Handle endianness in xhci_set_configuration()
In xhci_set_configuration(), 'Context Entries' field in the slot
context was cleared with mask LAST_CTX_MASK, but it should have
taken the endianness into consideration.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
2018-05-30 11:59:10 +02:00
Bin Meng
eaaefb066c usb: xhci: Fix config fail of FS hub behind a HS hub with MTT
If a full speed hub connects to a high speed hub which supports MTT,
the MTT field of its slot context will be set to 1 when xHCI driver
setups an xHCI virtual device in xhci_setup_addressable_virt_dev().
Once usb core fetch its hub descriptor, and need to update the xHC's
internal data structures for the device, the HUB field of its slot
context will be set to 1 too, meanwhile MTT is also set before, this
will cause configure endpoint command fail. In the case, we should
clear MTT to 0 for full speed hub according to section 6.2.2.

This keeps in sync with Linux kernel commit:
  096b110: usb: xhci: fix config fail of FS hub behind a HS hub with MTT

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
2018-05-30 11:59:10 +02:00
Bin Meng
ae751b060e usb: xhci: Initialize dev_state to 0 in the input slot context
Per xHCI spec chapter 6.2.2 table 6-7, as input, software shall
initialize the dev_state field to '0'. Though this does not seem
to cause any issue with most xHC implementations, let's do this
to conform with the spec.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Tested-by: Marek Vasut <marek.vasut@gmail.com>
Tested-by: Matthias Blankertz <matthias.blankertz@cetitec.com>
2018-05-30 11:59:10 +02:00
Bin Meng
793c819c6e usb: xhci: Set accurate add context flags when updating hub attributes
If a USB 3.0 hub is plugged into the root port of the xHC, the xHCI
driver will issue a 'Configure Endpoint' command to the xHC for it
to update its internal data structure for this hub device. The hub
attributes are in the slot context so we need tell xHC to update the
slot context by setting the add context flags of the input control
context to only cover the slot context.

At present the add context flags is or'ed with the slot context bit,
but it should really be accurately set to the slot context, as the
variable that holds the value of the add context flags comes from
whatever was set in the last command execution, which may contain
additional contexts that 'Configure Endpoint' command should not
touch. Some xHC implementations like x86 don't complain such, but
it was observed on Renesas RCar Gen3 platform that the RCar xHC
complains with a 'TRB error' completion codes as the response.

Reported-by: Marek Vasut <marek.vasut@gmail.com>
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Tested-by: Marek Vasut <marek.vasut@gmail.com>
Tested-by: Matthias Blankertz <matthias.blankertz@cetitec.com>
2018-05-30 11:59:10 +02:00
Matthias Blankertz
3f48422679 usb: xhci-rcar: deregister before deactivating clock
During the execution of xhci_deregister xHCI registers are accessed. If
the clock is already deactivated when xhci_deregister is called this can
lead to undefined behavior. Change the order to deregister the device
before deactivating the clock.

Signed-off-by: Matthias Blankertz <matthias.blankertz@cetitec.com>
2018-05-30 11:59:10 +02:00
Jagan Teki
dd3228170a usb: sunxi: Switch to use generic-phy
Allwinner USB PHY handling can be done through driver-model
generic-phy so add the generic-phy ops to relevant places
on host and musb sunxi driver and enable them in respective
SOC's.

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Acked-by: Jun Nie <jun.nie@linaro.org>
2018-05-28 16:40:43 +05:30
Jagan Teki
aa29b11b3f phy: sun4i-usb: Add a sunxi specific function for setting squelch-detect
The sunxi otg phy has a bug where it wrongly detects a high speed squelch
when reset on the root port gets de-asserted with a lo-speed device.

The workaround for this is to disable squelch detect before de-asserting
reset, and re-enabling it after the reset de-assert is done. Add a sunxi
specific phy function to allow the sunxi-musb glue to do this.

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Acked-by: Jun Nie <jun.nie@linaro.org>
2018-05-28 16:40:43 +05:30
Jagan Teki
223278c6c9 musb: sunxi: Add support for H3/H5/A64
Like other Allwinner SoC, the H3/H5/A64 is missing the config register
from the musb hardware block. Use a known working value for it
like other SoC.

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Acked-by: Jun Nie <jun.nie@linaro.org>
2018-05-28 16:40:43 +05:30
Jagan Teki
5c5fe883e0 musb: sunxi: Use BIT instead of numerical shift
Use BIT is possible areas instead of numerical shift.

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Acked-by: Jun Nie <jun.nie@linaro.org>
2018-05-28 16:40:43 +05:30
Jagan Teki
9d12a82ed3 musb: sunxi: Add OTG device clkgate and reset for H3/H5
Add OTG device clkgate and reset for H3/H5 through driver_data.

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Acked-by: Jun Nie <jun.nie@linaro.org>
2018-05-28 16:40:43 +05:30
Jagan Teki
97202dd6ec musb: sunxi: Add fifo config
Unlike other Allwinner SOC's H3/H5/V3s OTG support 4 endpoints
with relevant fifo configs, rest all have 5 endpoints.
So add the fifo configs and defer them based on driver_data.

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Acked-by: Jun Nie <jun.nie@linaro.org>
2018-05-28 16:40:43 +05:30
Jagan Teki
98424b7031 musb: sunxi: Use simple way to fill musb_hdrc pdata
Filling musb_hdrc pdata using structure will unnecessary
add extra ifdefs, so fill them inside probe call for
better code understanding and get rid ifdefs using
devicetree compatible.

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Acked-by: Jun Nie <jun.nie@linaro.org>
2018-05-28 16:40:43 +05:30
Jagan Teki
ae8b78de30 musb: sunxi: Add proper macros instead of numericals
- add proper macros for musb_config members
- use bool 'true' for multipoint and dyn_fifo instead of numerical 1

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Acked-by: Jun Nie <jun.nie@linaro.org>
2018-05-28 16:40:43 +05:30
Jagan Teki
831cc98b1f usb: sunxi: Simplify ccm reg base code
Move struct sunxi_ccm_reg pointer to private structure
so-that accessing ccm reg base become more proper way
and avoid local initialization in each function.

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Acked-by: Jun Nie <jun.nie@linaro.org>
2018-05-28 16:40:43 +05:30
Mugunthan V N
0ad3f771b6 drivers: usb: dwc3: remove devm_zalloc from linux_compact
devm_zalloc() is already defined in dm/device.h header, so
devm_zalloc can be removed from linux_compact.h beader file.

Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-05-18 13:37:02 +02:00
Michal Simek
d067624c47 usb: xhci: zynqmp: Remove support for !DM_USB
Switch to DM_USB was done and there is no need to keep !DM_USB code in
tree.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2018-05-18 13:23:15 +02:00
Michal Simek
41a3d4fda4 usb: xhci: zynqmp: Add support for DM_USB
The patch is adding support for DM_USB for xhci driver.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-05-18 13:23:13 +02:00
Michal Simek
49d674547c usb: dwc3: Add generic DWC3 glue logic driver
By enabling BLK by default this is the next driver which needs to get
support for DM_USB. Adding generic DWC3 glue logic which only
parse nodes and read device mode. Based on it probe proper
host/peripheral DWC3 drivers for it.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-05-18 13:23:10 +02:00
Mugunthan V N
59592b99d8 usb: common: add support to get maximum speed from dt
Add support to get maximum speed from dt so that usb drivers
makes use of it for DT parsing.

Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
(rebase and fix errors)
Reviewed-by: Simon Glass <sjg@chromium.org>
2018-05-18 13:23:10 +02:00
Mugunthan V N
23ba2d6372 usb: dwc3: Add dwc3_init/remove with DM_USB
The patch is preparing dwc3 core for enabling DM_USB with peripheral
driver with using driver model support.
The driver will be bound by the DWC3 wrapper driver based on the
dr_mode device tree entry.

Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com>
(Remove dwc3-omap changes)
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-05-18 13:23:10 +02:00
Seung-Woo Kim
1fe9ae76b1 gadget: f_thor: update to support more than 4GB file as thor 5.0
During file download, it only uses 32bit variable for file size and
it limits maximum file size less than 4GB. Update to support more
than 4GB file with using two 32bit variables for file size as thor
protocol 5.0.

Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com>
2018-05-18 13:17:30 +02:00
Seung-Woo Kim
f9e8dc0abd gadget: f_thor: fix filename overflow
The thor sender can send filename without null character and it is
used without consideration of overflow. Actually, character array
for filename is assigned with DEFINE_CACHE_ALIGN_BUFFER() and it
is bigger than size of memcpy, so there was no real overflow.
Fix filename overflow for code level integrity.

Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com>
2018-05-18 13:17:30 +02:00
Bryan O'Donoghue
31dd8efeb6 usb: composite convert __set_bit to generic_set_bit
Compiling the f_mass_storage driver for an x86 target results in a
compilation error as set_bit and clear_bit are provided by bitops.h

To address that situation we discussed on the list moving to
genetic_set_bit() instead.

Doing a quick grep for similar situations in drivers/usb shows that the
composite device is using __set_bit().

This patch switches over to generic_set_bit to maintain consistency between
the two gadget drivers.

Signed-off-by: Bryan O'Donoghue <pure.logic@nexus-software.ie>
Cc: Lukasz Majewski <lukma@denx.de>
Cc: Marek Vasut <marex@denx.de>
2018-05-15 21:44:05 -04:00
Bryan O'Donoghue
5ac73f6879 usb: f_mass_storage: Fix set_bit and clear_bit usage
Compiling the f_mass_storage driver for an x86 target results in a
compilation error as set_bit and clear_bit are provided by bitops.h

Looking at the provenance of the current u-boot code and the git change
history in the kernel, it looks like we have a local copy of set_bit and
clear_bit as a hold-over from porting the Linux driver into u-boot.

These days __set_bit and __clear_bit are optionally provided by an arch and
can be used as inputs to generic_bit_set and generic_bit_clear.

This patch switches over to generic_set_bit and generic_clear_bit to
accommodate.

Tested on i.MX WaRP7 and Intel Edison

Signed-off-by: Bryan O'Donoghue <pure.logic@nexus-software.ie>
Cc: Lukasz Majewski <lukma@denx.de>
Cc: Marek Vasut <marex@denx.de>
2018-05-15 21:44:05 -04:00
Tom Rini
f739fcd831 SPDX: Convert a few files that were missed before
As part of the main conversion a few files were missed.  These files had
additional whitespace after the '*' and before the SPDX tag and my
previous regex was too strict.  This time I did a grep for all SPDX tags
and then filtered out anything that matched the correct styles.

Fixes: 83d290c56f ("SPDX: Convert all of our single license tags to Linux Kernel style")
Reported-by: Heinrich Schuchardt <xypron.debian@gmx.de>
Signed-off-by: Tom Rini <trini@konsulko.com>
2018-05-10 20:38:35 -04:00
Masahiro Yamada
8c1de5e08b regmap: clean up regmap allocation
Putting zero length array at the end of struct is a common technique
to embed arbitrary length of members.  There is no good reason to let
regmap_alloc_count() branch by "if (count <= 1)".

As far as I understood the code, regmap->base is an alias of
regmap->ranges[0].start, but it is not helpful but make the code
just ugly.

Rename regmap_alloc_count() to regmap_alloc() because the _count
suffix seems pointless.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
[trini: fixup cpu_info-rcar.c]
Signed-off-by: Tom Rini <trini@konsulko.com>
2018-05-07 15:15:27 -04:00
Tom Rini
4549e789c1 SPDX: Convert all of our multiple license tags to Linux Kernel style
When U-Boot started using SPDX tags we were among the early adopters and
there weren't a lot of other examples to borrow from.  So we picked the
area of the file that usually had a full license text and replaced it
with an appropriate SPDX-License-Identifier: entry.  Since then, the
Linux Kernel has adopted SPDX tags and they place it as the very first
line in a file (except where shebangs are used, then it's second line)
and with slightly different comment styles than us.

In part due to community overlap, in part due to better tag visibility
and in part for other minor reasons, switch over to that style.

This commit changes all instances where we have multiple licenses (in
these cases, dual license) declared in the SPDX-License-Identifier tag.
In this case we change from listing "LICENSE-A LICENSE-B" or "LICENSE-A
or LICENSE-B" or "(LICENSE-A OR LICENSE-B)" to "LICENSE-A OR LICENSE-B"
as per the Linux Kernel style document.  Note that parenthesis are
allowed so when they were used before we continue to use them.

Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
2018-05-07 10:24:31 -04:00
Tom Rini
83d290c56f SPDX: Convert all of our single license tags to Linux Kernel style
When U-Boot started using SPDX tags we were among the early adopters and
there weren't a lot of other examples to borrow from.  So we picked the
area of the file that usually had a full license text and replaced it
with an appropriate SPDX-License-Identifier: entry.  Since then, the
Linux Kernel has adopted SPDX tags and they place it as the very first
line in a file (except where shebangs are used, then it's second line)
and with slightly different comment styles than us.

In part due to community overlap, in part due to better tag visibility
and in part for other minor reasons, switch over to that style.

This commit changes all instances where we have a single declared
license in the tag as both the before and after are identical in tag
contents.  There's also a few places where I found we did not have a tag
and have introduced one.

Signed-off-by: Tom Rini <trini@konsulko.com>
2018-05-07 09:34:12 -04:00
Heinrich Schuchardt
48cdfa2f81 usb: f_mass_storage: simplify logical expression
An unsigned int is always >= 0.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2018-04-30 19:38:09 +02:00
Heinrich Schuchardt
fa9da8ee60 usb: gadget: remove duplicate assignment.
We should not make the same assignement twice.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2018-04-30 19:38:09 +02:00
Alex Kiernan
ab9e12f651 spl: disk: usb: Add dependencies to sprintf/strto*
If SPL serial support is disabled nothing brings in sprintf, snprintf
or simple_strtoul:

  env/built-in.o: In function `regex_callback':
  env/attr.c:128: undefined reference to `sprintf'
  disk/built-in.o: In function `blk_get_device_by_str':
  disk/part.c:386: undefined reference to `simple_strtoul'
  disk/part.c:395: undefined reference to `simple_strtoul'
  disk/built-in.o: In function `blk_get_device_part_str':
  disk/part.c:522: undefined reference to `simple_strtoul'
  disk/built-in.o: In function `part_set_generic_name':
  disk/part.c:704: undefined reference to `sprintf'
  drivers/built-in.o: In function `init_peripheral_ep':
  drivers/usb/musb-new/musb_gadget.c:1826: undefined reference to `sprintf'
  drivers/built-in.o: In function `musb_core_init':
  drivers/usb/musb-new/musb_core.c:1451: undefined reference to `snprintf'

Add those dependencies here.

Signed-off-by: Alex Kiernan <alex.kiernan@gmail.com>
2018-04-28 18:32:24 -04:00
Tom Rini
d024236e5a Remove unnecessary instances of DECLARE_GLOBAL_DATA_PTR
We have a large number of places where while we historically referenced
gd in the code we no longer do, as well as cases where the code added
that line "just in case" during development and never dropped it.

Signed-off-by: Tom Rini <trini@konsulko.com>
2018-04-27 14:54:48 -04:00
Christophe Kerello
d57ed4d9f2 usb: gadget: composite: fix NULL pointer when a non standard request is received
In case usb configuration is unknown (cdev->config == NULL), non standard
request should not be processed.
Remove also the cdev->config check below which will never happen.

This issue was seen using ums feature.

Signed-off-by: Christophe Kerello <christophe.kerello@st.com>
Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2018-04-26 15:15:07 +02:00
Neil Armstrong
003659bda9 usb: host: dwc3: fix phys init
When no PHYs are declared in the dwc3 node, the phy init fails.
This patch checks if the "phys" property is presend and reports
the error returned by dev_count_phandle_with_args().

This patchs also fixes the styles issues added in last commit.

This patch should fix the DWC3 support on the UniPhier SoC family.

Fixes: 7c839ea70c ("usb: host: dwc3: Add support for multiple PHYs")
Reported-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2018-04-26 14:03:13 +02:00
Neil Armstrong
38276090ee usb: dwc3-of-simple: fix error check of clk_get_bulk when disabled
The disabled clk API returns -ENOSYS unlike the reset API returning -ENOTSUPP.

Fixes: ca7fdc8b12 ("usb: host: Add simple of glue driver for DWC3 USB Controllers integration")
Reported-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2018-04-21 18:38:56 +02:00
Jean-Jacques Hiblot
cc73ba97c0 usb: dwc3-of-simple: Add support for DRA7/AM57 platforms.
Add the compatibility with "ti,dwc3" and enable it by default if DM_USB
is enabled.

Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
2018-04-21 18:38:56 +02:00
Jean-Jacques Hiblot
103774b71c usb: dwc3-of-simple: Fix dependencies
This simple glue layer does not require CONFIG_MISC, but it does require
CONFIG_DM_USB.

Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
2018-04-21 18:38:56 +02:00
Neil Armstrong
7c839ea70c usb: host: dwc3: Add support for multiple PHYs
DWC3 Ips can have more than 1 PHY for USB2 and 1 PHY for USB3, add support
for a generic number of PHYs and adapt the code to handle a generic
number of PHYs.

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2018-04-11 17:22:07 +02:00
Neil Armstrong
ca7fdc8b12 usb: host: Add simple of glue driver for DWC3 USB Controllers integration
This is a port of the dwc3-of-simple driver from Linux to enable/deassert
clock and resets of a simple DWC3 Controller HW glue.

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2018-04-11 17:22:07 +02:00
Alex Kiernan
9925f1dbc3 net: Move enetaddr env access code to env config instead of net config
In order that we can use eth_env_* even when CONFIG_NET isn't set, move
these functions to environment code from net code.

This fixes failures such as:

  board/ti/am335x/built-in.o: In function `board_late_init':
  board/ti/am335x/board.c:752: undefined reference to `eth_env_set_enetaddr'
  u-boot/board/ti/am335x/board.c:766: undefined reference to `eth_env_set_enetaddr'

which caters for use cases such as:

commit f411b5cca4 ("board: am335x: Always set eth/eth1addr environment
variable")

when Ethernet is required in Linux, but not U-Boot.

Signed-off-by: Alex Kiernan <alex.kiernan@gmail.com>
2018-04-08 23:00:58 -04:00
Alex Kiernan
a18d1064db usb: gadget: USB_ETHER requires network support
In order to compile the USB Ethernet gadget support we require that NET
is enabled, add that dependency here.

Signed-off-by: Alex Kiernan <alex.kiernan@gmail.com>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2018-04-08 23:00:58 -04:00
Heinrich Schuchardt
e56a713eac usb: rockchip: remove duplicate assignement.
Assigning f_rkusb->reboot_flag twice doesn't make sense.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2018-03-28 23:30:31 +02:00
Alexander Graf
f24534307e lan7xxx: Require phylib
The lan75xx and lan78xx drivers need to drive their phy via the generic
phylib framework. Let's reflect that dependency in Kconfig, so that we
don't get build errors when phylib does not get selected.

Signed-off-by: Alexander Graf <agraf@suse.de>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2018-03-22 15:05:31 -05:00
Patrice Chotard
ac6c796c3f usb: dwc2: Replace printf, pr_err by dev_info, dev_err
Replace printf() call by dev_info() and pr_err() by dev_err()

Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2018-03-17 03:23:09 +01:00
Christophe Kerello
c2e4c86569 usb: dwc2: increase timeout in wait_for_chhltd
This patch increases timeout to 2s.
It was seen on 2 USB devices (Verbatim STORE N GO 070B4AED0FB22358 and
USB DISK 2.0 9000729BA41DDF40) that the request sense command takes
between 1.3s and and 1.5s.

Signed-off-by: Christophe Kerello <christophe.kerello@st.com>
Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2018-03-17 03:23:09 +01:00
Christophe Kerello
82e7975b85 usb: dwc2: disable external vbus supply when the device is removed
This patch adds an interface to disable the power in dwc2 driver.
This new interface is called when the device is removed.

Signed-off-by: Christophe Kerello <christophe.kerello@st.com>
Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2018-03-17 03:23:09 +01:00
Patrice Chotard
6048d42fa7 usb: ohci-generic: replace pr_err() by dev_err()
As we get access to struct udevice, use dev_err() instead
of pr_err().

Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2018-03-17 03:20:53 +01:00
Patrice Chotard
cab4d48a93 usb: ohci-generic: factorize PHY operation
Factorize PHY get/init/poweron and PHY poweroff/exit operations
into separate function, it simplify the error path.

Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2018-03-17 03:20:53 +01:00
Patrice Chotard
633e1ec6bf usb: ohci-generic: handle phy power on/off
Add generic_phy_power_on() and generic_phy_power_off()
calls to switch ON/OFF phy during probe and remove functions.

Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2018-03-17 03:20:53 +01:00
Patrice Chotard
df7777ab43 usb: ehci-generic: replace pr_err() by dev_err()
As we get access to struct udevice, use dev_err() instead
of pr_err().

Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2018-03-17 03:20:53 +01:00
Patrice Chotard
20f06a4833 usb: ehci-generic: factorize PHY operation
Factorize PHY get/init/poweron and PHY poweroff/exit operations
into separate function, it simplify the error path.

Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2018-03-17 03:20:53 +01:00
Patrice Chotard
a800a6793f usb: ehci-generic: handle phy power on/off
Add generic_phy_power_on() and generic_phy_power_off()
calls to switch ON/OFF phy during probe and remove functions.

Signed-off-by: Christophe Kerello <christophe.kerello@st.com>
Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2018-03-17 03:20:53 +01:00
Stefan Roese
2715e32ce1 usb: Remove unused ppc4xx EHCI host driver
ppc4xx support was removed some time ago. Lets remove the now unused
EHCI driver and all its references for this platform as well.

Signed-off-by: Stefan Roese <sr@denx.de>
Cc: Heinrich Schuchardt <xypron.glpk@gmx.de>
Cc: Marek Vasut <marex@denx.de>
2018-03-17 03:20:15 +01:00
Vignesh R
2fd4242cc5 ubs: xhci-dwc3: Enable USB3 PHY when available
DWC3 USB3 controllers will need USB3 PHY to be enabled, in addition to
USB2 PHY, to be functional. Therefore enable USB3 PHY when available.

Signed-off-by: Vignesh R <vigneshr@ti.com>
2018-03-17 03:19:09 +01:00
Vignesh R
3fc2635d3d usb: xhci-dwc3: Refractor PHY operations into separate function
Refractor PHY get/init/poweron and PHY poweroff/exit operations into
separate function so that its easy to support multiple PHYs.

Signed-off-by: Vignesh R <vigneshr@ti.com>
2018-03-17 03:19:08 +01:00
Vignesh R
7d4e4d3063 usb: xhci-dwc3: Power on USB PHY before using
It is wrong that expect .phy_init() to also power on the PHY. Therefore,
explicitly, call generic_phy_power_on() after generic_phy_power_init() in
order to power on PHY before using it.

Signed-off-by: Vignesh R <vigneshr@ti.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2018-03-17 03:19:08 +01:00
Alexey Brodkin
42637fdae8 usb: dwc2: Allow selection of data buffer size
If we use hardware with very small RAM (let's consider just a couple
of hundreds of kB but not megabytes) it is not super convenient to lose
64kB for statically allocated bufer which most probably won't be used
as big as it is. Typically we'll have much shorter data packages to
excahnge and in the worst case longer packets will be split on separate
transactions.

For those corner-cases user will be able to set his buffer size of
choice via USB_DWC2_BUFFER_SIZE option in menuconfig.

By default we'll use 64 kB as it was hard-coeded before so existing
users shouldn't be affected at all.

Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Cc: Marek Vasut <marex@denx.de>
2018-03-17 03:15:18 +01:00
Tom Rini
81f077f40f Merge git://git.denx.de/u-boot-sh 2018-03-05 20:24:17 -05:00
Masahiro Yamada
b08c8c4870 libfdt: move headers to <linux/libfdt.h> and <linux/libfdt_env.h>
Thomas reported U-Boot failed to build host tools if libfdt-devel
package is installed because tools include libfdt headers from
/usr/include/ instead of using internal ones.

This commit moves the header code:
  include/libfdt.h         -> include/linux/libfdt.h
  include/libfdt_env.h     -> include/linux/libfdt_env.h

and replaces include directives:
  #include <libfdt.h>      -> #include <linux/libfdt.h>
  #include <libfdt_env.h>  -> #include <linux/libfdt_env.h>

Reported-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-03-05 10:16:28 -05:00
Marek Vasut
4f0533ffcd usb: xhci-rcar: Add R8A77965 M3N entries
Add entries for the R8A77965 M3N SoC.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2018-03-05 10:59:38 +01:00
Marek Vasut
bb4059a53b dfu: Rename _FUNCTION_DFU to DFU_OVER_
Do the following to make the symbol names less confusing.

sed -i "s/\([TU][^_]\+\)_FUNCTION_DFU/DFU_OVER_\1/g" \
	`git grep _FUNCTION_DFU | cut -d ":" -f 1 | sort -u`

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Lukasz Majewski <lukma@denx.de>
2018-02-21 20:28:15 +01:00
Heinrich Schuchardt
462c117ce0 usb: kbd: select SYS_STDIO_DEREGISTER
If SYS_STDIO_DEREGISTER is not selected and USB_KEYBOARD is selected
U-Boot cannot be built due to missing function stdio_deregister_dev.

So USB_KEYBOARD should select SYS_STDIO_DEREGISTER.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2018-02-21 20:28:15 +01:00
Andre Heider
a64a614db7 usb: gadget: sdp: fix pointer cast warnings for 64bit archs
The SDP protocol contains multiple 32bit pointers. Add a helper function
to get a valid pointer from these values and use it.

This fixes the following warnings:

drivers/usb/gadget/f_sdp.c: In function ‘sdp_rx_data_complete’:
drivers/usb/gadget/f_sdp.c:347:10: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast]
   memcpy((void *)sdp->dnl_address, req->buf + 1, datalen);
          ^
drivers/usb/gadget/f_sdp.c: In function ‘sdp_jump_imxheader’:
drivers/usb/gadget/f_sdp.c:625:10: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast]
  entry = (void *)headerv2->entry;
          ^
drivers/usb/gadget/f_sdp.c: In function ‘sdp_handle_in_ep’:
drivers/usb/gadget/f_sdp.c:668:20: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast]
   memcpy(&data[1], (void *)sdp_func->dnl_address, datalen);
                    ^
drivers/usb/gadget/f_sdp.c:679:31: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast]
   status = sdp_jump_imxheader((void *)sdp_func->jmp_address);
                               ^

Signed-off-by: Andre Heider <a.heider@gmail.com>
2018-02-21 20:28:15 +01:00
Andre Heider
24ccd0c8fd usb: gadget: sdp: add missing line breaks
Cosmetic change.

Signed-off-by: Andre Heider <a.heider@gmail.com>
Reviewed-by: Lukasz Majewski <lukma@denx.de>
Acked-by: Stefan Agner <stefan.agner@toradex.com>
2018-02-21 20:28:15 +01:00
Faiz Abbas
b16c129c22 usb: host: xhci-omap: Remove redundant board_usb_init and board_usb_cleanup functions
board_usb_init()/_cleanup() should be in board files and don't have
a place in the xhci-omap driver. Weak versions for
board_usb_init()/_cleanup() already exist in common/usb.c
(for host mode) and drivers/usb/gadget/g_dnl.c (for gadget mode).

Therefore, remove init and cleanup functions from xhci-omap and
implement them in the board files.

Signed-off-by: Faiz Abbas <faiz_abbas@ti.com>
Reviewed-by: Marek Vasut <marex@denx.de>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2018-02-15 13:44:30 +01:00
Alexey Brodkin
163f8858ae usb: dwc2: Rename CONFIG_DWC2_UTMI_PHY_WIDTH to CONFIG_DWC2_UTMI_WIDTH
For some reason from day one we used to have both CONFIG_DWC2_UTMI_WIDTH
mentioned in dwc2.h and in scripts/config_whitelist.txt but never really used
and CONFIG_DWC2_UTMI_PHY_WIDTH used in real code in dwc2.c (but never
defined).

Moreover even though CONFIG_DWC2_UTMI_WIDTH might be either 8 or 16
depending on hardware (and the same is said in a comment for it in
dwc2.h) but then 8 is hardcoded in the header leaving no ability to
override this value in board's configuration.

Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Cc: Marek Vasut <marex@denx.de>
2018-02-15 13:44:27 +01:00
Ulf Magnusson
a43aebee89 usb: ulpi: kconfig: Remove meaningless choice default
'default' on a choice refers to the symbol selected by default, not to
the choice mode, so 'default n' is meaningless.

No functional changes. Optional choices implicitly default to n mode
(and there is no way to make them default to another mode).

Discovered in Kconfiglib (https://github.com/ulfalizer/Kconfiglib),
which prints the following warning:

	warning: the default selection n (undefined) of <choice> (defined at drivers/usb/ulpi/Kconfig:3) is not contained in the choice

I've added a corresponding warning to the C tools too, which is
currently in linux-next: https://patchwork.kernel.org/patch/9983667/

Signed-off-by: Ulf Magnusson <ulfalizer@gmail.com>
2018-02-05 20:58:12 -05:00
Tom Rini
a4d403290e usb: dwc2: make casts of ep->dma_buf consistent
In most places in the code we cast this to an unsigned long, but in one
place we cast to an unsigned int.  For consistency and to fix a warning
on 64bit targets, always cast this to unsigned long.  For the long term
we should however change the declaration of dma_buf.

Cc: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
Acked-by: Lukasz Majewski <lukma@denx.de>
Acked-by: Marek Vasut <marex@denx.de>
Signed-off-by: Tom Rini <trini@konsulko.com>
2018-02-05 12:09:43 -05:00
Lukasz Majewski
4f60e5d3a8 Kconfig: gadget: Move CONFIG_USB_FUNCTION_MASS_STORAGE to Kconfig
This commit moves USB_FUNCTION_MASS_STORAGE config to Kconfig.

Signed-off-by: Lukasz Majewski <lukma@denx.de>
Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
2018-02-02 07:13:48 -05:00
Lukasz Majewski
c6c1ca100f Kconfig: gadget: Move CONFIG_USB_FUNCTION_THOR to Kconfig
This commit moves USB_FUNCTION_THOR config to Kconfig.

Signed-off-by: Lukasz Majewski <lukma@denx.de>
Acked-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
2018-02-02 07:13:48 -05:00
Lukasz Majewski
b76965958c Kconfig: usb: Sort USB_FUNCTION_* entries
Lets provide alphabetical order for USB_FUNCTION_* entries of
USB_GADGET_DOWNLOAD

Signed-off-by: Lukasz Majewski <lukma@denx.de>
2018-02-02 07:13:48 -05:00
Tom Rini
40b61180c1 usb: host: Drop unused hcd_name from r8a66597-hcd.c
The variable hcd_name is unsued, drop.

Cc: Marek Vasut <marex@denx.de>
Cc: Chris Brandt <chris.brandt@renesas.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
2018-01-28 04:00:59 +01:00
Tom Rini
1c0ae0097b usb: Remove isp116x-hcd support
The isp116x-hcd driver is extremely long unused, so just remove it.

Cc: Marek Vasut <marex@denx.de>
Signed-off-by: Tom Rini <trini@konsulko.com>
2018-01-28 04:00:59 +01:00
Tom Rini
f95a4b3a55 Merge git://git.denx.de/u-boot-usb 2018-01-27 14:48:52 -05:00
Tom Rini
1d12a7c8cd Merge git://git.denx.de/u-boot-spi 2018-01-26 07:46:34 -05:00
Daniel Schwierzeck
6f7c92db4c usb: ehci: mxs: fix swapped argument in ehci_writel()
ehci_writel() swaps the arguments for address and value. One call
in ehci-mxs ignores that.

This fixes the warning:

drivers/usb/host/ehci-mxs.c: In function ?ehci_hcd_stop?:
drivers/usb/host/ehci-mxs.c:159:19: error: initialization makes integer from pointer without a cast [-Werror=int-conversion]
  ehci_writel(tmp, &hcor->or_usbcmd);
                   ^
arch/arm/include/asm/io.h:117:34: note: in definition of macro ?writel?
 #define writel(v,c) ({ u32 __v = v; __iowmb(); __arch_putl(__v,c); __v; })
                                  ^
drivers/usb/host/ehci-mxs.c:159:2: note: in expansion of macro ?ehci_writel?
  ^~~~~~~~~~~

Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2018-01-25 20:59:20 +01:00
Gustavo A. R. Silva
eacccbda43 usb: xhci: Fix bool initialization in xhci_bulk_tx
Bool initializations should use true and false.

This issue was detected with the help of Coccinelle.

Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Cc: Bin Meng <bmeng.cn@gmail.com>
Cc: Marek Vasut <marex@denx.de>
2018-01-25 20:59:16 +01:00
Álvaro Fernández Rojas
48263504c8 wait_bit: use wait_for_bit_le32 and remove wait_for_bit
wait_for_bit callers use the 32 bit LE version

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Reviewed-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
Reviewed-by: Jagan Teki <jagan@openedev.com>
2018-01-24 12:03:43 +05:30
Adam Ford
6574864df8 Convert CONFIG_ROCKCHIP_USB2_PHY to Kconfig
This converts the following to Kconfig:
   CONFIG_ROCKCHIP_USB2_PHY

Signed-off-by: Adam Ford <aford173@gmail.com>
2018-01-22 16:43:30 -05:00
Adam Ford
b9b500b0f9 Convert CONFIG_OMAP_USB_PHY to Kconfig
This converts the following to Kconfig:
   CONFIG_OMAP_USB_PHY

Signed-off-by: Adam Ford <aford173@gmail.com>
2018-01-22 16:43:30 -05:00
Adam Ford
3b9e2a2520 Convert CONFIG_TWL4030_USB to Kconfig
This converts the following to Kconfig:
   CONFIG_TWL4030_USB

Signed-off-by: Adam Ford <aford173@gmail.com>
2018-01-22 16:43:30 -05:00
Adam Ford
e13a9dc370 Convert CONFIG_USB_MUSB_HCD et al to Kconfig
This converts the following to Kconfig:
   CONFIG_USB_MUSB_HCD
   CONFIG_USB_MUSB_UDC
   CONFIG_USB_DAVINCI
   CONFIG_USB_OMAP3
   CONFIG_USB_DA8XX
   CONFIG_USB_AM35X

Signed-off-by: Adam Ford <aford173@gmail.com>
2018-01-22 16:43:29 -05:00
Adam Ford
86362221fc Convert CONFIG_USB_MUSB_OMAP2PLUS et al to Kconfig
This converts the following to Kconfig:
   CONFIG_USB_MUSB_OMAP2PLUS
   CONFIG_USB_MUSB_AM35X
   CONFIG_USB_MUSB_DSPS
   CONFIG_USB_MUSB_PIO_ONLY

Signed-off-by: Adam Ford <aford173@gmail.com>
2018-01-22 16:43:29 -05:00
Eddie Cai
bf2b72bef1 usb: rockchip: add the rockusb gadget
this patch implement rockusb protocol on the device side. this is based on
USB download gadget infrastructure. the rockusb function implements the rd,
wl, rid commands. it can work with rkdeveloptool

Signed-off-by: Eddie Cai <eddie.cai.linux@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2018-01-10 11:11:05 +01:00
Chen-Yu Tsai
f4f9896ac3 musb: sunxi: Use base address from device tree
Now that the musb sunxi glue driver is completely device model / device
tree driven, we should use the base address from the device tree,
instead of hard-coding it in the source code.

Fixes: 3a61b080ac ("musb: sunxi: switch to the device model")
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
2018-01-10 11:11:05 +01:00
Ran Wang
91f4fb9b89 arm64: layerscape: Move CONFIG_HAS_FSL_DR_USB to Kconfig
Rename to USB_EHCI_FSL, use Kconfig to select ehci accordingly.

Signed-off-by: Ran Wang <ran.wang_1@nxp.com>
2018-01-09 12:37:15 +01:00
Ran Wang
be3872ea81 usb: ehci: fsl: Fix some compile warnings.
When enable CONFIG_HAS_FSL_DR_USB, we might encounter below compile
warning, apply this patch can fix it:

drivers/usb/host/ehci-fsl.c:109:4: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast]
   ((u32)hccr + HC_LENGTH(ehci_readl(&hccr->cr_capbase)));
    ^
drivers/usb/host/ehci-fsl.c:108:9: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast]
  hcor = (struct ehci_hcor *)
         ^
drivers/usb/host/ehci-fsl.c:115:8: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast]
        (u32)hccr, (u32)hcor,
        ^
include/log.h:131:26: note: in definition of macro 'debug_cond'
    printf(pr_fmt(fmt), ##args); \
                          ^~~~
drivers/usb/host/ehci-fsl.c:114:2: note: in expansion of macro 'debug'
  debug("ehci-fsl: init hccr %x and hcor %x hc_length %d\n",
  ^~~~~
drivers/usb/host/ehci-fsl.c:115:19: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast]
        (u32)hccr, (u32)hcor,
                   ^
include/log.h:131:26: note: in definition of macro 'debug_cond'
    printf(pr_fmt(fmt), ##args); \
                          ^~~~
drivers/usb/host/ehci-fsl.c:114:2: note: in expansion of macro 'debug'
  debug("ehci-fsl: init hccr %x and hcor %x hc_length %d\n",
  ^~~~~

Signed-off-by: Ran Wang <ran.wang_1@nxp.com>
2018-01-09 12:37:15 +01:00
Tom Rini
1a3fc354b5 Merge git://git.denx.de/u-boot-fsl-qoriq 2017-12-18 18:39:00 -05:00
Wenbin song
a8f33034f2 armv8: ls1043a/ls2080a: check SoC by device ID
Check LS1043A/LS2080a by device ID without using personality ID to
determine revision number. This check applies to all various
personalities of the same SoC family.

Signed-off-by: Wenbin Song <wenbin.song@nxp.com>
Reviewed-by: York Sun <york.sun@nxp.com>
2017-12-13 13:40:29 -08:00
Chris Brandt
243fd6420d usb: r8a66597: convert wait loop to readw_poll_timeout
It is better to use an existing wait loop implementation.

Signed-off-by: Chris Brandt <chris.brandt@renesas.com>
2017-12-09 13:39:27 +01:00
Chris Brandt
11f4678962 usb: r8a66597: Add support for RZ/A series
While the USB HW in the RZ/A is basically the same, there are some
differences from the original versions that were in the SH SoCs.

Signed-off-by: Chris Brandt <chris.brandt@renesas.com>
2017-11-28 04:06:40 +01:00
Vincent Prince
8171dac00d Trigger watchdog before calling usb_gadget_handle_interrupts
This prevents board resets when calling sdp command on boards which have a watchdog.

Signed-off-by: Vincent Prince <vincent.prince.fr@gmail.com>
Reviewed-by: Lukasz Majewski <lukma@denx.de>
Reviewed-by: Stefan Agner <stefan.agner@toradex.com>
2017-11-26 02:22:36 +01:00
Marek Vasut
a8c402f45c usb: gadget: storage: Increase FSG_BUFLEN
Increase the buffer length to be just above maximum permissible value
of 128 kiB . This increases the performance of the UMS and alike by a
factor of 2 - 2.5 as the buffers are less fragmented.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Lukasz Majewski <lukma@denx.de>
2017-11-26 02:22:36 +01:00
Dirk Behme
b3cbcd902d usb: ehci: do not invalidate a NULL buffer
Its a valid use case to call ehci_submit_async() with a NULL buffer
with length 0. E.g. from usb_set_configuration().

As invalidate_dcache_range() isn't able to judge if the address
NULL is valid or not (depending on the SoC hardware configuration it
might be valid) do the check in ehci_submit_async() as here we know
that we don't have to invalidate such a buffer.

Signed-off-by: Dirk Behme <dirk.behme@de.bosch.com>
2017-11-26 02:22:36 +01:00
Heinrich Schuchardt
45157d2764 dm: usb: ehci: avoid possible NULL dereference
Currently we check in ehci_shutdown() if ctrl is NULL after
dereferencing it.

Before this we have already dereferenced ctrl, ctrl->hccr,
and ctrl->hcor in ehci_get_portsc_register(), ehci_submit_root(),
and hci_common_init().

A better approach is to already check ctrl, ctrl->hccr, and ctrl->hcor
during the initialization in ehci_register() and usb_lowlevel_init()
and signal an error here via the return code.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2017-11-26 02:22:36 +01:00
Marek Vasut
e1cc60c0d6 usb: xhci: Add Renesas R-Car xHCI driver
Add firmware V3, firmware loader and XHCI glue for the Renesas R-Car
Gen3 SoCs XHCI controller. Thus far only the R-Car Gen3 R8A7795 ES2.0+
and R8A7796 are supported.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Cc: Bin Meng <bmeng.cn@gmail.com>
2017-11-26 02:22:36 +01:00
Alexey Brodkin
9829ce2ff2 usb: ehci: Fix accessors for big-endian platforms and descriptors
Commit 9000eddbae ("drivers/usb/ehci: Use platform-specific accessors")
broke USB 2.0 on big-endian platforms because for them writel/readl()
does automatic conversion of BE data to LE.

Proper implementation requires to use "raw" variant of these accessors
which read/write data without messing with endianess.

While at it replace cpu_to_be32() to be32_to_cpu() in readl() to
keep sane semantics.

Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Cc: Marek Vasut <marex@denx.de>
Reported-by: Vladimir Boroda <boroda@yahoo.com>
2017-11-26 02:22:36 +01:00
Jon Nettleton
d3d036af8c mvebu: usb: xhci: a38x support
This makes the initial changes need to support the
a38x series of SOCs.  It adds the device-tree identifier
as well as changing the board_support function to take
the IO address designated by device-tree.

Signed-off-by: Jon Nettleton <jon@solid-run.com>
[baruch: use fdt_addr_t; update 37xx and 8K implementations]
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Stefan Roese <sr@denx.de>
2017-11-16 11:45:20 +01:00
Patrice Chotard
fb48bc448c sti: fix STMicroelectronics copyright
Uniformize all STMicroelectronics copyrights headers for STi
related code.

Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2017-11-06 09:51:01 -05:00
Ran Wang
420b0eba3c usb: host: Move CONFIG_XHCI_FSL to Kconfig
use Kconfig to select xhci accordingly.

Signed-off-by: Ran Wang <ran.wang_1@nxp.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: York Sun <york.sun@nxp.com>
2017-10-27 08:44:06 -07:00
Masahiro Yamada
4bb3dac772 usb: dwc3-uniphier: replace <common.h> with <linux/bitops.h>
Including <common.h> pulls in a lot of bloat.  What this driver needs
is BIT(), so replace it with <linux/bitops.h>

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Marek Vasut <marex@denx.de>
2017-10-15 22:32:24 +09:00
Tom Rini
2ee87b0c1a Merge branch 'rmobile' of git://git.denx.de/u-boot-sh 2017-10-10 20:14:38 -04:00