mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-29 08:01:08 +00:00
793c819c6e
If a USB 3.0 hub is plugged into the root port of the xHC, the xHCI driver will issue a 'Configure Endpoint' command to the xHC for it to update its internal data structure for this hub device. The hub attributes are in the slot context so we need tell xHC to update the slot context by setting the add context flags of the input control context to only cover the slot context. At present the add context flags is or'ed with the slot context bit, but it should really be accurately set to the slot context, as the variable that holds the value of the add context flags comes from whatever was set in the last command execution, which may contain additional contexts that 'Configure Endpoint' command should not touch. Some xHC implementations like x86 don't complain such, but it was observed on Renesas RCar Gen3 platform that the RCar xHC complains with a 'TRB error' completion codes as the response. Reported-by: Marek Vasut <marek.vasut@gmail.com> Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Tested-by: Marek Vasut <marek.vasut@gmail.com> Tested-by: Matthias Blankertz <matthias.blankertz@cetitec.com> |
||
|---|---|---|
| .. | ||
| common | ||
| dwc3 | ||
| emul | ||
| eth | ||
| gadget | ||
| host | ||
| musb | ||
| musb-new | ||
| phy | ||
| ulpi | ||
| Kconfig | ||