Commit graph

111 commits

Author SHA1 Message Date
Timur Tabi
2feb4af001 fsl: improve the PIXIS code and fix a few bugs
Refactor and document the Freescale PIXIS code, used on most 85xx and 86xx
boards.  This makes the code easier to read and more flexible.

Delete pixis.h, because none of the exported functions were actually being
used by any other file.  Make all of the functions in pixis.c 'static'.
Remove "#include pixis.h" from every file that has it.

Remove some unnecessary #includes.

Make 'pixis_base' into a macro, so that we don't need to define it in every
function.

Add "while(1);" loops at the end of functions that reset the board, so that
execution doesn't continue while the reset is in progress.

Replace in_8/out_8 calls with clrbits_8, setbits_8, or clrsetbits_8, where
appropriate.

Replace ulong/uint with their spelled-out equivalents.  Remove unnecessary
typecasts, changing the types of some variables if necessary.

Add CONFIG_SYS_PIXIS_VCFGEN0_ENABLE and CONFIG_SYS_PIXIS_VBOOT_ENABLE to make
it easier for specific boards to support variations in the PIXIS registers
sets.  No current boards appears to need this feature.

Fix the definition of CONFIG_SYS_PIXIS_VBOOT_MASK for the MPC8610 HPCD.
Apparently, "pixis_reset altbank" has never worked on this board.

Signed-off-by: Timur Tabi <timur@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2010-04-07 00:21:27 -05:00
Timur Tabi
9ff32d8ccf mpc86xx: set the DDR BATs after calculating true DDR size
After determining how much DDR is actually in the system, set DBAT0 and
IBAT0 accordingly.  This ensures that the CPU won't attempt to access
(via speculation) addresses outside of actual memory.

On 86xx systems, DBAT0 and IBAT0 (the BATs for DDR) are initialized to 2GB
and kept that way.  If the system has less than 2GB of memory (typical for
an MPC8610 HPCD), the CPU may attempt to access this memory during
speculation.  The zlib code is notorious for generating such memory reads,
and indeed on the MPC8610, uncompressing the Linux kernel causes a machine
check (without this patch).

Currently we are limited to power of two sized DDR since we only use a
single bat.  If a non-power of two size is used that is less than
CONFIG_MAX_MEM_MAPPED u-boot will crash.

Signed-off-by: Timur Tabi <timur@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2010-03-30 10:50:22 -05:00
Becky Bruce
107b579c75 86xx: Remove redundant code in initdram
The same code exists both inside an #ifdef and outside of it.
Remove the extra code for all the 86xx boards.

Signed-off-by: Becky Bruce <beckyb@kernel.crashing.org>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-11-04 21:37:12 -06:00
Peter Tyser
858290178f ppc: Enable full relocation to RAM
The following changes allow U-Boot to fully relocate from flash to
RAM:
 - Remove linker scripts' .fixup sections from the .text section
 - Add -mrelocatable to PLATFORM_RELFLAGS for all boards
 - Define CONFIG_RELOC_FIXUP_WORKS for all boards

Previously, U-Boot would partially relocate, but statically initialized
pointers needed to be manually relocated.

Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
2009-10-03 10:15:45 +02:00
Kumar Gala
3e7b6c1f2d ppc/8xxx: Refactor code to determine if PCI is enabled & agent/host
Refactor the code into a simple bitmask lookup table that determines if
a given PCI controller is enabled and if its in host/root-complex or
agent/end-point mode.

Each processor in the PQ3/MPC86xx family specified different encodings
for the cfg_host_agt[] and cfg_IO_ports[] boot strapping signals.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-09-08 09:10:07 -05:00
Kumar Gala
73aacc5228 86xx: Remove redudant PLATFORM_CPPFLAGS
For historic reasons we had defined some additional PLATFORM_CPPFLAGS like:

PLATFORM_CPPFLAGS += -DCONFIG_MPC86xx=1
PLATFORM_CPPFLAGS += -DCONFIG_MPC8641=1

However these are all captured in the config.h and thus redudant.  Also
moved common 86xx flags into cpu/mpc86xx/config.mk.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-08-28 17:12:37 -05:00
Kumar Gala
cb151aa2cf pci/fsl_pci_init: Fold fsl_pci_setup_inbound_windows into fsl_pci_init
Every platform that calls fsl_pci_init calls fsl_pci_setup_inbound_windows
before it calls fsl_pci_init.  There isn't any reason to just call it
from fsl_pci_init and simplify things a bit.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-08-28 17:12:35 -05:00
Kumar Gala
fb3143b35e pci/fsl_pci_init: Fold pci_setup_indirect into fsl_pci_init
Every platform that calls fsl_pci_init calls pci_setup_indirect before
it calls fsl_pci_init.  There isn't any reason to just call it from
fsl_pci_init and simplify things a bit.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-08-28 17:12:35 -05:00
Kumar Gala
048e7efe91 85xx/86xx: Replace in8/out8 with in_8/out_8 on FSL boards
The pixis code used in8/out8 all over the place.  Replace it with
in_8/out_8 macros.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-07-22 10:16:55 -05:00
Peter Tyser
e7ee23ec17 86xx: Rename ccsr_ddr's sdram_mode_1, sdram_cfg_1 fields
Rename sdram_mode_1 to sdram_mode and sdram_cfg_1 to sdram_cfg to match
the 86xx user's manual and other Freescale architectures

Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-07-22 09:43:47 -05:00
Kumar Gala
9af9c6bdc1 86xx: Report which "bank" of NOR flash we are booting from on MPC8641HPCN
The MPC8641HPCN board is capable of swizzling the upper address bit of
the NOR flash we boot out of which creates the concept of "virtual"
banks.  This is useful in that we can flash a test of image of u-boot
and reset to one of the virtual banks while still maintaining a
working image in "bank 0".

The PIXIS FPGA exposes registers on LBC which we can use to determine
which "bank" we are booting out of (as well as setting which bank to
boot out of).

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-07-22 09:08:50 -05:00
Kumar Gala
32049b4048 fsl_pci: Move prototypes into fsl_pci.h and remove explicit externs
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-04-04 10:21:30 -05:00
Kumar Gala
c8514622e2 fsl_pci: Renamed immap_fsl_pci.h to fsl_pci.h
Rename the pci header for FSL HW so we can move some prototypes
in there and stop doing explicit externs

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-04-04 10:21:29 -05:00
Kumar Gala
7649a590b5 86xx: Cleanup MP support
* Use CONFIG_MP instead of CONFIG_NUM_CPUS to match 85xx
* Introduce determine_mp_bootpg() helper.  We'll need this to address a
  bug introduced in v2009.03 with 86xx MP booting.  We have to make sure
  to reserve the region of memory used for the MP bootpg() so other
  u-boot code doesn't use it.
* Added dummy versions of cpu_reset(), cpu_status() & cpu_release() to
  allow cmd_mp.c to build and work. In the future we should look at
  implementing all these functions. This could be common w/85xx if we
  use spin tables on 86xx.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-04-01 15:29:44 -05:00
Becky Bruce
f6ef8b7a43 mpc8641hpcn/sbc8641d: Add missing board_lmb_reserves
We're missing the board_lmb_reserve definitions that allow
cpu_mp_lmb_reserve to be called; this means that Linux
is free to reallocate reserved pages.  Linux currently boots
because we're getting lucky - the page we've reserved is
high enough in memory that it isn't allocated by Linux
while we still need it to be in existence.

Signed-off-by: Becky Bruce <beckyb@kernel.crashing.org>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-03-31 22:41:34 -05:00
Trent Piepho
f62fb99941 Fix all linker script to handle all rodata sections
A recent gcc added a new unaligned rodata section called '.rodata.str1.1',
which needs to be added the the linker script.  Instead of just adding this
one section, we use a wildcard ".rodata*" to get all rodata linker section
gcc has now and might add in the future.

However, '*(.rodata*)' by itself will result in sub-optimal section
ordering.  The sections will be sorted by object file, which causes extra
padding between the unaligned rodata.str.1.1 of one object file and the
aligned rodata of the next object file.  This is easy to fix by using the
SORT_BY_ALIGNMENT command.

This patch has not be tested one most of the boards modified.  Some boards
have a linker script that looks something like this:

*(.text)
. = ALIGN(16);
*(.rodata)
*(.rodata.str1.4)
*(.eh_frame)

I change this to:

*(.text)
. = ALIGN(16);
*(.eh_frame)
*(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*)))

This means the start of rodata will no longer be 16 bytes aligned.
However, the boundary between text and rodata/eh_frame is still aligned to
16 bytes, which is what I think the real purpose of the ALIGN call is.

Signed-off-by: Trent Piepho <xyzzy@speakeasy.org>
2009-03-20 22:39:12 +01:00
Becky Bruce
2331e18b9d mpc8641hpcn: Indicate 36-bit addr map in boot messages
If 36-bit addressing is enabled, print a message on the console
when we boot.

Signed-off-by: Becky Bruce <beckyb@kernel.crashing.org>
2009-02-23 22:48:17 +01:00
Peter Tyser
4ef630df77 86xx: Reset update
Update the 86xx reset sequence to try executing a board-specific reset
function.  If the board-specific reset is not implemented or does not
succeed, then assert #HRESET_REQ.  Using #HRESET_REQ is a more standard
reset procedure than the previous method and allows all board
peripherals to be reset if needed.

Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
2009-02-16 18:05:56 -06:00
Becky Bruce
49f46f3bf0 mpc8641hpcn: Clean up PCI mapping concepts
Clean up PCI mapping concepts in the 8641 config - rename _BASE
to _BUS, as it's actually a PCI bus address, separate virtual
and physical addresses into _VIRT and _PHYS, and use each
appopriately.

Signed-off-by: Becky Bruce <beckyb@kernel.crashing.org>
2009-02-10 00:30:17 +01:00
Becky Bruce
2ecca34017 mpc8641hpcn: Set up outbound pci windows before inbound
Because the inbound pci windows are mapped generously, set up
the more specific outbound windows first.  This way, when we
search the pci regions for something, we will hit on the more
specific region.  This can actually be a problem on systems
with large amounts of RAM.

Signed-off-by: Becky Bruce <beckyb@kernel.crashing.org>
2009-02-10 00:26:45 +01:00
Dave Liu
b4983e16d1 fsl-ddr: use the 1T timing as default configuration
For light loaded system, we use the 1T timing to gain better
memory performance, but for some heavily loaded system,
you have to add the 2T timing options to board files.

Signed-off-by: Dave Liu <daveliu@freescale.com>
Acked-by: Andy Fleming <afleming@freescale.com>
2009-01-23 17:03:14 -06:00
Selvamuthukumar
9b827cf172 Align end of bss by 4 bytes
Most of the bss initialization loop increments 4 bytes
at a time. And the loop end is checked for an 'equal'
condition. Make the bss end address aligned by 4, so
that the loop will end as expected.

Signed-off-by: Selvamuthukumar <selva.muthukumar@e-coninfotech.com>
Signed-off-by: Wolfgang Denk <wd@denx.de>
2008-11-18 23:13:16 +01:00
Becky Bruce
3f510db522 mpc8641: fix address-cells default in old .dts detection
address-cells defaults to 2, not 1; so in the unlikely
event that it isn't specified, this patch is required
for correct operation.

Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
2008-11-11 09:44:10 -06:00
Becky Bruce
d52082b12c mpc8641: Try to detect old .dts files
Since we've changed the memory map of the board, be nice and
add some checking to try to catch out-of-date .dts files.  We do
this by checking the CCSRBAR location in the .dts and comparing
it to the CCSRBAR location in u-boot.  If they don't match, a
warning msg is printed.  This isn't foolproof, but it's simple and
will catch most of the cases where an out-of-date .dts is present,
including all of the cases where a new u-boot is used with an old
standard MPC8641 .dts file as supplied with Linux.

Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
2008-11-10 10:10:05 -06:00
Becky Bruce
3111d32c49 mpc8641: Support 36-bit physical addressing
This patch creates a memory map with all the devices
in 36-bit physical space, in addition to the 32-bit map.
The CCSR relocation is moved (again, sorry) to
allow for the physical address to be 36 bits - this
requires translation to be enabled.  With 36-bit physical
addressing enabled, we are no longer running with VA=PA
translations.  This means we have to distinguish between
the two in the config file.  The existing region name is
used to indicate the virtual address, and a _PHYS variety
is created to represent the physical address.

Large physical addressing is not enabled by default.
Set CONFIG_PHYS_64BIT in the config file to turn this on.

Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
2008-11-10 10:10:05 -06:00
Becky Bruce
c759a01a00 mpc8641: Change 32-bit memory map
The memory map on the 8641hpcn is modified to look more like
the 85xx boards; this is a step towards a more standardized
layout going forward. As part of this change, we now relocate
the flash.

The regions for some of the mappings were far larger than they
needed to be.  I have reduced the mappings to match the
actual sizes supported by the hardware.

In addition I have removed the comments at the head
of the BAT blocks in the config file, rather than updating
them.  These get horribly out of date, and it's a simple
matter to look at the defines to see what they are set to
since everything is right here in the same file.

Documentation has been changed to reflect the new map, as this
change is user visible, and affects the OS which runs post-uboot.

Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
2008-11-10 10:10:04 -06:00
Becky Bruce
170deacb1d mpc8641: Drop imaginary second flash bank, map 8MB
There's a lot of setup and foo for the second flash
bank.  The problem is, this board doesn't actually have one.
Clean this up.  Also, the flash is 8M in size.  Get rid
of the confusing aliased overmapping, and just map 8M.

Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
2008-11-10 10:10:03 -06:00
Jon Loeliger
33211469f7 Merge commit 'wd/master' 2008-11-10 10:04:51 -06:00
Becky Bruce
4c77de3f14 86xx: Make dram_size a phys_size_t
It's currently a long and should be phys_size_t.

Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
2008-11-03 11:05:01 -06:00
Becky Bruce
af5d100e8d mpc8641: Make PCI and RIO mutually exclusive, fix non-PCI build
You can't actually have both, and with some coming changes to
change the memory map for the board and support 36-bit physical,
we need the extra BAT that is being consumed by having both.

I also make non-PCI configs build cleanly, for the sake of sanity.

Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
2008-11-03 11:04:59 -06:00
Becky Bruce
98693b85d4 mpc8641: Stop supporting non-PCI_PNP configs
We don't actually ever do this, remove the code so we
can stop maintaining it.

Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
2008-11-03 11:04:59 -06:00
Wolfgang Denk
3cbd823116 Coding Style cleanup, update CHANGELOG
Signed-off-by: Wolfgang Denk <wd@denx.de>
2008-11-02 16:14:22 +01:00
Dave Liu
5ba1ef5074 86xx: remove the second DDR LAW setting for mpc8641hpcn
The DDR1 LAW will precedence the DDR2 LAW, so remove
the second DDR LAW.

Signed-off-by: Dave Liu <daveliu@freescale.com>
Acked-by: Becky Bruce <becky.bruce@freescale.com>
2008-10-30 10:30:18 -05:00
Dave Liu
137a2dfd11 86xx: remove the unused ddr_enable_ecc in the board file
The DDR controller of 86xx processors have the ECC data init
feature, and the new DDR code is using the feature, we don't
need the way with DMA to init memory again.

Signed-off-by: Dave Liu <daveliu@freescale.com>
Acked-by: Kumar Gala <kumar.gala@freescale.com>
2008-10-30 10:27:44 -05:00
Kumar Gala
c2083e0e11 86xx: Convert all fsl_pci_init users to new APIs
Converted MPC8610HCPD, MPC8641HPCN, and SBC8641D to use
fsl_pci_setup_inbound_windows() and ft_fsl_pci_setup().

With these changes the board code is a bit smaller and we get dma-ranges
set in the device tree for these boards.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Signed-off-by: Andrew Fleming-AFLEMING <afleming@freescale.com>
Acked-by: Jon Loeliger <jdl@freescale.com>
2008-10-24 17:35:48 -05:00
Haiying Wang
c21617fd26 Add DDR options setting on MPC8641HPCN board
* Add board specific parameter table to choose correct cpo, clk_adjust,
write_data_delay based on board ddr frequency and n_ranks.

* Set odt_rd_cfg and odt_wr_cfg based on the dimm# and CS#.

Signed-off-by: James Yang <James.Yang@freescale.com>
Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
2008-10-18 21:54:05 +02:00
Haiying Wang
dfb49108e4 Pass dimm parameters to populate populate controller options
Because some dimm parameters like n_ranks needs to be used with the board
frequency to choose the board parameters like clk_adjust etc. in the
board_specific_paramesters table of the board ddr file, we need to pass
the dimm parameters to the board file.

* move ddr dimm parameters header file from /cpu to /include directory.
* add ddr dimm parameters to populate board specific options.
* Fix fsl_ddr_board_options() for all the 8xxx boards which call this function.

Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
2008-10-18 21:54:04 +02:00
Jean-Christophe PLAGNIOL-VILLARD
6d0f6bcf33 rename CFG_ macros to CONFIG_SYS
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2008-10-18 21:54:03 +02:00
Ben Warren
0b252f50ae Moved initialization of RTL8139 Ethernet controller to board_eth_init()
Affected boards:
	hidden_dragon
	MPC8544DS
	MPC8610HPCN
	R2DPLUS
	TB0229

Removed initialization of the driver from net/eth.c

Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
2008-09-02 21:18:16 -07:00
Kumar Gala
6a8e569293 FSL DDR: Convert MPC8641HPCN to new DDR code.
Signed-off-by: Jon Loeliger <jdl@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-08-27 02:06:02 +02:00
Wolfgang Denk
9b55a25369 Fix some more print() format errors.
Signed-off-by: Wolfgang Denk <wd@denx.de>
2008-07-11 01:16:00 +02:00
Jon Loeliger
859f24350e Merge commit 'wd/master' 2008-07-10 12:05:32 -05:00
Wolfgang Denk
c8a3b109f0 Cleanup out-or-tree building for some boards (.depend)
Signed-off-by: Wolfgang Denk <wd@denx.de>
2008-07-02 23:49:18 +02:00
Kumar Gala
7de8c21f14 MPC8641HPCN: Report board id, board version and fpga version.
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-06-19 08:32:13 -05:00
Becky Bruce
9973e3c614 Change initdram() return type to phys_size_t
This patch changes the return type of initdram() from long int to phys_size_t.
This is required for a couple of reasons: long int limits the amount of dram
to 2GB, and u-boot in general is moving over to phys_size_t to represent the
size of physical memory.  phys_size_t is defined as an unsigned long on almost
all current platforms.

This patch *only* changes the return type of the initdram function (in
include/common.h, as well as in each board's implementation of initdram).  It
does not actually modify the code inside the function on any of the platforms;
platforms which wish to support more than 2GB of DRAM will need to modify
their initdram() function code.

Build tested with MAKEALL for ppc, arm, mips, mips-el. Booted on powerpc
MPC8641HPCN.

Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
2008-06-12 08:50:18 +02:00
Wolfgang Denk
5ea67393b8 Merge branch 'master' of git://www.denx.de/git/u-boot-mpc85xx
Conflicts:

	include/asm-ppc/fsl_lbc.h

Signed-off-by: Wolfgang Denk <wd@denx.de>
2008-06-11 21:33:16 +02:00
Kumar Gala
859a86a25c 85xx/86xx: Move to dynamic mgmt of LAWs
With the new LAW interface (set_next_law) we can move to letting the
system allocate which LAWs are used for what purpose.  This makes life
a bit easier going forward with the new DDR code.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Signed-off-by: Andy Fleming <afleming@freescale.com>
Acked-by: Jon Loeliger <jdl@freescale.com>
Acked-by: Becky Bruce <becky.bruce@freescale.com>
2008-06-11 01:52:23 -05:00
Jon Loeliger
1a247ba7fa Merge commit 'wd/master' 2008-06-06 10:48:31 -05:00
Wolfgang Denk
53677ef18e Big white-space cleanup.
This commit gets rid of a huge amount of silly white-space issues.
Especially, all sequences of SPACEs followed by TAB characters get
removed (unless they appear in print statements).

Also remove all embedded "vim:" and "vi:" statements which hide
indentation problems.

Signed-off-by: Wolfgang Denk <wd@denx.de>
2008-05-21 00:14:08 +02:00
Jon Loeliger
2c289e320d mpc86xx: Removed unused and unconfigured memory test code.
Besides, other common code exists.

Signed-off-by: Jon Loeliger <jdl@freescale.com>
2008-05-19 09:47:25 -05:00
Kumar Gala
45239cf415 85xx/86xx: Rename ext_refrec to timing_cfg_3 to match docs
All the 85xx and 86xx UM describe the register as timing_cfg_3
not as ext_refrec.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-04-29 11:44:29 -05:00
Jon Loeliger
a30a549a35 Remove erroneous or extra spd.h #includers.
Many of the spd.h #includers don't need it,
and wanted to have spd_sdram() declared instead.
Since they didn't get that, some also had open
coded extern declarations of it instead or as well.
Fix it all up by using spd_sdram.h where needed.

Signed-off-by: Jon Loeliger <jdl@freescale.com>
2008-03-05 00:17:43 +01:00
Jon Loeliger
a551cee99a 86xx: Fix GUR PCI config registers properly.
Back in commit 975a083a5e where
I tried to "8610HPCD: Fix typos in two PCI setup registers", I
botched it due to not realizing that 8610 and 8641 had different
Global Utility Register defintions, one of which was like 85xx,
and the other wasn't.  Correct this problem by introducing two
symbols, one for each 86xx SoC, but neither of which is named
anything like 85xx.

My bad.  Lovely Wednesday with git bisect.  You know.

Signed-off-by: Jon Loeliger <jdl@freescale.com>
2008-02-20 14:45:09 -06:00
Jon Loeliger
13f5433f70 86xx: Convert sbc8641d to use libfdt.
This is the proper fix for a missing closing brace in the function
ft_cpu_setup() noticed by joe.hamman <at> embeddedspecialties.com.
The ft_cpu_setup() function in mpc8641hpcn.c should have been
removed earlier as it was under the obsolete CONFIG_OF_FLAT_TREE,
but was missed.  Only, the sbc8641d was nominally still using it.
It all got ripped out, and the funcality that was in ft_board_setup()
was refactored to remove the CPU portions into the new file
cpu/mpc86xx/fdt.c instead.  Make sbc8641d use this now.

Based loosely on an original patch from joe.hamman@embeddedspecialties.com

Signed-off-by: Jon Loeliger <jdl@freescale.com>
2008-02-18 14:01:56 -06:00
Becky Bruce
9cd32426f2 86xx: Remove old-style law setup code
This includes mpc8610hpcd, mpc8641hpcn, and sbc8641d.

Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
2008-01-24 12:12:40 -06:00
Becky Bruce
4933b91f8a 86xx: Support new law setup method and convert mpc8641
Adds the support code in cpu/mpc86xx for the new law setup code
recently created fsl_law.c, and changes the MPC8641HPCN config
to use this code.

Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
2008-01-24 12:12:30 -06:00
Wolfgang Denk
64134f0112 Fix linker scripts: add NOLOAD atribute to .bss/.sbss sections
With recent toolchain versions, some boards would not build because
or errors like this one (here for ocotea board when building with
ELDK 4.2 beta):
ppc_4xx-ld: section .bootpg [fffff000 -> fffff23b] overlaps section .bss [fffee900 -> fffff8ab]

For many boards, the .bss section is big enough that it wraps around
at the end of the address space (0xFFFFFFFF), so the problem will not
be visible unless you use a 64 bit tool chain for development. On
some boards however, changes to the code size (due to different
optimizations) we bail out with section overlaps like above.

The fix is to add the NOLOAD attribute to the .bss and .sbss
sections, telling the linker that .bss does not consume any space in
the image.

Signed-off-by: Wolfgang Denk <wd@denx.de>
2008-01-12 20:31:39 +01:00
Jon Loeliger
ea9f7395ec Convert MPC8641HPCN to use libfdt.
Assumes the presence of the aliases node in the DTS to
locate the ethernet, pci and serial nodes for fixups.

Use consistent fdtaddr and fdtfile in environment variables.

Signed-off-by: Jon Loeliger <jdl@freescale.com>
2008-01-03 10:27:03 -06:00
Ed Swarthout
f75e89e9b5 ft_board_setup update 85xx/86xx of pci/pcie bus-range property.
pcie is now differentiated from pci.  Add 8641 bus-range updates.

Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
2007-09-04 16:00:41 -05:00
Kim Phillips
7608d75f9c support board vendor-common makefiles
if a board/$(VENDOR)/common/Makefile exists, build it.

also add the first such case, board/freescale/common/Makefile, to
handle building board-shared EEPROM, PIXIS, and MDS-PIB code, as
dictated by board configuration.

thusly get rid of alternate build dir errors such as:

FATAL: can't create /work/wd/tmp/u-boot-ppc/board/freescale/mpc8360emds/../common/pq-mds-pib.o: No such file or directory

by putting the common/ mkdir command in its proper place (the common
Makefile). Common bits from existing individual board Makefiles have
been removed.

Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
2007-08-29 02:15:46 +02:00
Jon Loeliger
4ce917742b Move the MPC8641HPCN board under board/freescale.
Minor path corrections needed to ensure buildability.

Signed-off-by: Jon Loeliger <jdl@freescale.com>
2007-08-15 12:20:40 -05:00