Commit graph

15444 commits

Author SHA1 Message Date
Tom Rini
0e62d5b2ab Fixes for 2019.04
- fix bashism for MX8
 	- fix ethernet for MX53
 	- fix docs for i.MX8
 -----BEGIN PGP SIGNATURE-----
 
 iQHDBAABCgAtFiEEiZClFGvhzbUNsmAvKMTY0yrV63cFAlynLM8PHHNiYWJpY0Bk
 ZW54LmRlAAoJECjE2NMq1et38/QL/Rc3p1pF6Dr9zKzxA0rcMoBo9MzzTrUP6XrN
 8syDBJNo2u93Msv78xHTQMCcfxRR3bkTYiWPEzWphC4Qk2IZIe2sETxu2BqsmWRI
 qzK5+L7oU3qJYqY8mZTUKPhmNxDu7E6yGXI1cWboWSR+/DMTxrUHZU5gjQyaQ/WN
 Diko1+lyaygZyPv0FzBdx7Vv+agQusGXGu4XbRkOXhrE6ytMv2ZjCzUtMYRIUg8H
 057DtJfwgU+zfimUoeuiltAwywh9UGxmlR4kb6rF5VZWX0Xn/XoVbMR6qRQXaFIz
 PzlNu3FEpOmvBQ5W5xySHS0CzbeTisIopJehZbkCc+XaEr80GplN995rGWGIN5av
 nlYS7rWHyIcVxoQNT61JTfVC1blFu6+tiokINWFI8as0fMrEAU4okzT4oBaGxdun
 CVcZDo9ytxKWLqtpD0MIQW4r4kJ27yWe3s4ot+v/+jb+XwkatX2J6oaiKviFFhuc
 BwniIb9lsi3ESIOaQXjpJ+qAw9gWYA==
 =//jr
 -----END PGP SIGNATURE-----

Merge tag 'u-boot-imx-20190405' of git://git.denx.de/u-boot-imx

Fixes for 2019.04

	- fix bashism for MX8
	- fix ethernet for MX53
	- fix docs for i.MX8
2019-04-05 09:09:56 -04:00
Lukasz Majewski
da60b4301c DTS: Fix ETH PHY reset on HSC|DDC boards (imx53)
After the commit: "eth: dm: fec: Add gpio phy reset binding"
SHA1: efd0b79106

The FEC ETH driver switched to PHY GPIO reset performed with data defined
in DTS.
For the HSC|DDC boards the GPIO reset signal is active low and hence the
wrong DTS description must be changed (otherwise the reset for ETH is not
properly setup).

Signed-off-by: Lukasz Majewski <lukma@denx.de>
2019-04-02 13:44:18 +02:00
Tom Rini
da06f9a185 Merge branch 'master' of git://git.denx.de/u-boot-sh
Minor fixes for the Alt board and PHY use on Gen2.
2019-04-01 23:30:00 -04:00
Marek Vasut
e3b086cf04 ARM: dts: rmobile: Activate I2C7 on Alt
Activate I2C7 on Alt to allow access to the PMIC.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2019-03-30 08:28:25 +01:00
Philipp Tomsich
a2893baa47 Revert "rockchip: Drop call to rockchip_dnl_mode_check() for now"
Due to a final resolution not coming up in time for 2019.04 and
following the consensus on the discussion, we'll keep this around
for 2019.04 after all.

This reverts commit 0d968ceb1f.
2019-03-29 09:21:13 +01:00
Tom Rini
d32519ac8a Merge branch 'master' of git://git.denx.de/u-boot-sh
- Various fixes for bugs found by u-boot test.py
2019-03-26 23:19:11 -04:00
Patrick Delaunay
abe66b1b5d Convert CONFIG_ENV_SPI_* to Kconfig
This converts the following to Kconfig:
  CONFIG_ENV_SPI_BUS
  CONFIG_ENV_SPI_CS
  CONFIG_ENV_SPI_MAX_HZ
  CONFIG_ENV_SPI_MODE

Most of time these value are not needed, CONFIG_SF_DEFAULT
with same value is used, so I introduced CONFIG_USE_ENV_SPI_*
to force the associated value for the environment.

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-03-25 17:36:59 -04:00
Patrick Delaunay
ac31d0d873 exynos: replace CONFIG_ENV_SPI_BASE by CONFIG_SYS_SPI_BASE
Replace CONFIG_ENV_SPI_BASE by the better CONFIG_SYS_SPI_BASE
(it is not the location for environment but the location for U-Boot)
and, as it is the only platform with use this define, remove
it from whitelist.

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-03-25 17:35:52 -04:00
Marek Vasut
c49d0ac38a ARM: dts: rmobile: Increase off-on delay on the SD Vcc regulator
An ADATA 16GB Industrial MLC card has so much capacitance on the Vcc
pin that the usual toggling of regulator to power the card off and on
is insufficient. When the card is calibrated into UHS SDR104 mode, it
will remain in that mode across the power cycle and subsequent attempt
to communicate with the card will fail.

The test with this card is to insert it into an SDHI slot and perform
"mmc dev 0 ; mmc dev 0", where the second "mmc dev 0" will fail.

Fix this problem by increasing the off-on delay from 0 to 20 mS.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2019-03-25 20:26:53 +01:00
Masahiro Yamada
344db3f330 mips: add missing dtb-y to arch/mips/dts/Makefile
Since commit 27cb7300ff ("Ensure device tree DTS is compiled"),
build succeeds irrespective of the correctness of Makefile.

In fact, you can compile any defconfig without adding any entry in
arch/*/dts/Makefile.

I am going to revert that commit, so device tree must be explicitly
listed in Makefile.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2019-03-22 12:15:12 -04:00
Masahiro Yamada
680207a1c5 powerpc: fix arch/powerpc/dts/Makefile
Since commit 27cb7300ff ("Ensure device tree DTS is compiled"),
build succeeds irrespective of the correctness of Makefile.

I am going to revert that commit, so wrong code must be fixed.

CONFIG_MCR3000 is not defined anywhere. CONFIG_TARGET_MCR3000 is the
correct one.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-03-22 12:15:10 -04:00
Masahiro Yamada
89c2b5c020 ARM: fix arch/arm/dts/Makefile
Since commit 27cb7300ff ("Ensure device tree DTS is compiled"),
build succeeds irrespective of the correctness of Makefile.

In fact, you can compile any defconfig without adding any entry in
arch/*/dts/Makefile.

As a result, a lot of wrong code have been merged unnoticed.

I am going to revert that commit, and lots of hidden issues have
come to light:

[1] Typos

  armada-3720-uDPU.dts, sun8i-a83t-tbs-a711.dts

  use the extension ".dts" instead of ".dtb"

[2] DTB is associated to undefined CONFIG option

  For example, mx6sllevk_defconfig defines CONFIG_MX6SLL, but
  associates its device tree to CONFIG_MX6SL, which is undefined.

[3] Lots of entries are missing

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Chris Packham <judge.packham@gmail.com>
[trini: add imx6ul pico dtbs]
Signed-off-by: Tom Rini <trini@konsulko.com>
2019-03-22 12:15:09 -04:00
Alexander Graf
ef331e3685 armv8: Disable exception vectors in SPL by default
Commit 1416e2d225 ("armv8: make SPL exception vectors optional") had a
typo in it which effectively disabled exception handling in SPL code always.

Since nobody complained, I guess we may as well disable exception handling
in SPL always by default.

So fix the bug to make the config option effective, but disable exception
handling in SPL by default. This gets us to the same functionality as before
by default, but with much less code included in the binary.

Signed-off-by: Alexander Graf <agraf@suse.de>
Reviewed-by: Matthias Brugger <mbrugger@suse.com>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
2019-03-22 12:15:03 -04:00
Keerthy
6dad56d733 arm: lib: bootm: Push the Starting kernel print to the end
Push the Starting kernel print to the end just before the
dm_remove_devices call.

Signed-off-by: Keerthy <j-keerthy@ti.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2019-03-22 08:35:50 -04:00
Tom Rini
a00d15757d Merge git://git.denx.de/u-boot-marvell
- Enable network interface on clearfog_gt_8k (Baruch)
- Fix dreamplug boot by adding an spi0 alias to the DT (Chris)
- Fix / enhance Marvell ddr3 setup / parameters (Chris)
- Change CONFIG_SYS_MALLOC_F_LEN to 0x2000 on db-88f6820-amc (Chris)
- Enable SPL_FLASH_BAR on db-88f6820-amc (Chris)
- Use correct pcie controller name in Armada-38x dts files (Chris)
- Disable d-cache on Kirkwood platforms as currently needed (Chris)
- Add a more descriptive comment to pci_mvebu.c (Stefan)
- Update Marvell maintainers entry (Stefan)
2019-03-19 19:58:48 -04:00
Tom Rini
810ae23fbc Merge branch 'master' of git://git.denx.de/u-boot-socfpga 2019-03-19 07:13:23 -04:00
Chris Packham
599f7aa541 ARM: kirkwood: disable dcache for Kirkwood boards
Prior to commit 93b283d49f ("ARM: CPU: arm926ejs: Consolidate cache
routines to common file") the kirkwood boards didn't have and dcache
support. The network and usb drivers rely on this. Set
CONFIG_SYS_DCACHE_OFF in the Kirkwood specific config.h.

Reported-by: Leigh Brown <leigh@solinno.co.uk>
Signed-off-by: Chris Packham <judge.packham@gmail.com>
Reviewed-by: Stefan Roese <sr@denx.de>
Signed-off-by: Stefan Roese <sr@denx.de>
2019-03-19 09:22:05 +01:00
Chris Packham
825dd50f59 ARM: mvebu: use correct name for pcie controller
When armada-385.dtsi was sync'd from Linux the name of the node
describing the pcie controller was changed from pcie-controller to pcie.
Some of the boards that include armada-385.dtsi were missed in the
update retaining the old name. This updates the affected boards.

Reported-by: Влад Мао <vlaomao@gmail.com>
Signed-off-by: Chris Packham <judge.packham@gmail.com>
Signed-off-by: Stefan Roese <sr@denx.de>
2019-03-19 09:22:05 +01:00
Chris Packham
5860532264 ARM: kirkwood: add spi0 alias for dreamplug
The conversion to DM_SPI managed to break accessing the environment on
dreamplug. This is because the environment code relies on being to able
to select the SPI device based on the sequence number. Add an alias so
that the spi0 bus gets sequence number 0.

Reported-by: Leigh Brown <leigh@solinno.co.uk>
Signed-off-by: Chris Packham <judge.packham@gmail.com>
Tested-by: Leigh Brown <leigh@solinno.co.uk>
Signed-off-by: Stefan Roese <sr@denx.de>
2019-03-19 09:22:05 +01:00
Ley Foon Tan
ff0005b56a ARM: dts: socfpga: Add missing altr,sysmgr-syscon for EMAC
Syscon register is required in dts to select correct
PHY interface.

Fix error below:

Net:   Failed to get syscon: -2

Signed-off-by: Ley Foon Tan <ley.foon.tan@intel.com>
2019-03-16 13:30:03 +01:00
Tom Rini
8303467e80 Merge git://git.denx.de/u-boot-fsl-qoriq
- DPAA2 fixes and DDR errata workaround for LS1021A
2019-03-15 11:58:17 -04:00
Alison Wang
158097052a armv7: ls102xa: Add workaround for DDR erratum A-008850
Barrier transactions from CCI400 need to be disabled till
the DDR is configured, otherwise it may lead to system hang.
The patch adds workaround to fix the erratum.

Signed-off-by: Shengzhou Liu <Shengzhou.Liu@nxp.com>
Signed-off-by: Alison Wang <alison.wang@nxp.com>
Reviewed-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
2019-03-15 11:52:01 +05:30
Tom Rini
9659eb46af Merge branch 'master' of git://git.denx.de/u-boot-samsung 2019-03-14 11:37:11 -04:00
Adam Ford
8d0370905c arm: dts: imx6qdl-u-boot: Enable spba-bus@2000000 simple bus
spba-bus has a few nodes under it including the UART1 and
some ESPI buses.  In order to use them in SPL, the
u-boot,dm-spl flag needs to be added to the spba-bus@2000000
container.

Signed-off-by: Adam Ford <aford173@gmail.com>
2019-03-13 09:14:35 +01:00
Fabio Estevam
75cd09cb18 imx8qxp: Fix the reported CPU frequency
Currently the CPU frequency is incorrectly reported:

CPU:   NXP i.MX8QXP RevB A35 at 147228 MHz

Fix this problem by using a direct call to the SCU firmware to
retrieve the Cortex A35 CPU frequency.

With this change applied the CPU frequency is displayed correctly:

CPU:   NXP i.MX8QXP RevB A35 at 1200 MHz

Tested-by: Marcelo Macedo <marcelo.macedo@nxp.com>
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Tested-by: Andrejs Cainikovs <andrejs.cainikovs@netmodule.com>
2019-03-13 09:14:35 +01:00
Fabio Estevam
737d8bd820 pico-imx6ul: Convert to DM MMC
Select CONFIG_DM_MMC=y in order to support MMC driver model.

This allows the MMC board related code to be removed.

Signed-off-by: Fabio Estevam <festevam@gmail.com>
Acked-by: Otavio Salvador <otavio@ossystems.com.br>
2019-03-13 09:14:35 +01:00
Fabio Estevam
e5c2244fc8 pico-imx6ul: Import dts files from kernel
Import the device tree files from kernel 5.0-rc6 in preparation
for driver model conversion.

Signed-off-by: Fabio Estevam <festevam@gmail.com>
Acked-by: Otavio Salvador <otavio@ossystems.com.br>
2019-03-13 09:14:35 +01:00
Tom Rini
6a08213d52 Merge git://git.denx.de/u-boot-x86
- ACPI changes and fixes to Intel Tangier/Edison
- i8254 beeper fixes
2019-03-11 11:24:20 -04:00
Bin Meng
3592965aff x86: crownbay: Enable the beeper sound driver
Use the i8254 sound driver to support creating simple beeps.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2019-03-11 22:55:01 +08:00
Bin Meng
8edaf34cfe x86: coreboot: Add the missing pc speaker node in the device tree
This is currently missing and without it the i8254 beeper driver
won't work.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2019-03-11 22:55:01 +08:00
Bin Meng
9b2c8c3066 x86: Add a dtsi file for the pc speaker
The pc speaker driven by the i8254 is generic enough to deserve
a single dtsi file to be included by boards that use it.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2019-03-11 22:55:01 +08:00
Bin Meng
7d0a53a40c x86: Make sure i8254 is setup correctly before generating beeps
The i8254 timer control IO port (0x43) should be setup correctly
by using PIT counter 2 to generate beeps, however in U-Boot other
codes like TSC driver utilizes PIT for TSC frequency calibration
and configures the counter 2 to a different mode that does not
beep. Fix this by always ensuring the PIT counter 2 is correctly
initialized so that the i8254 beeper driver works as expected.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2019-03-11 22:55:01 +08:00
Krzysztof Kozlowski
be26c4af3a arm: dts: exynos: Adjust whitespace around status property
Just add spaces around '=' sign for clarity.

Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2019-03-11 15:53:36 +09:00
Krzysztof Kozlowski
ae781d56fe arm: dts: exynos: Add ramp delay property to LDO regulators to Odroid XU3 family
Add startup time to LDO regulators of S2MPS11 PMIC on Odroid XU3/XU4/HC1
family of boards to be sure the voltage is proper before relying on the
regulator.

The datasheet for all the S2MPS1x family is inconsistent here and does
not specify unambiguously the value of ramp delay for LDO.  It mentions
30 mV/us in one timing diagram but then omits it completely in LDO
regulator characteristics table (it is specified for bucks).

However the vendor kernels for Galaxy S5 and Odroid XU3 use values of 12
mV/us or 24 mV/us.

Without the ramp delay value the consumers do not wait for voltage
settle after changing it.  Although the proper value of ramp delay for
LDOs is unknown, it seems safer to use at least some value from
reference kernel than to leave it unset.

Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Lukasz Majewski <lukma@denx.de>
Tested-by: Anand Moon <linux.amoon@gmail.com>
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2019-03-11 15:53:19 +09:00
Krzysztof Kozlowski
b5d3faa9f9 arm: dts: exynos: Add supply for ADC block to Odroid XU3 family
The ADC block requires VDD supply to be on so provide one.

Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Lukasz Majewski <lukma@denx.de>
Tested-by: Anand Moon <linux.amoon@gmail.com>
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2019-03-11 15:53:19 +09:00
Tom Rini
19c8c9c103 Merge branch 'master' of git://git.denx.de/u-boot-socfpga
- Arria10 DRAM fixes and Gen5 cache fixes
2019-03-10 10:16:07 -04:00
Andy Shevchenko
d9b59fc9ae x86: edison: Add the rest of UARTs present on board
Intel Edison has three UART ports, i.e.
 port 0 - Bluetooth
 port 1 - auxiliary, available for general purpose use
 port 2 - debugging, usually console output is here

Enable all of them for future use.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2019-03-10 08:17:00 +08:00
Andy Shevchenko
ab83e5c1a2 x86: edison: Use proper number of serial interface
The console is actually serial #2. When we would like to enable other ports,
this would be not okay to mess up with the ordering.

Thus, fix the number of default console interface to be 2.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2019-03-10 08:17:00 +08:00
Andy Shevchenko
edf18a83f8 x86: acpi: Not every platform has serial console a first device
We may not do an assumption that current console device is always a first
of UCLASS_SERIAL one.

For example, on properly described Intel Edison board the console UART
is a third one.

Use current serial device as described in global data.

Fixes: a61cbad78e ("dm: serial: Adjust serial_getinfo() to use proper API")
Cc: Simon Glass <sjg@chromium.org>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2019-03-10 08:17:00 +08:00
Andy Shevchenko
c652dd1557 x86: acpi: Add DMA descriptors for I2C1 on Intel Tangier
Intel Tangier SoC has a general purpose DMA which can serve to speed up
communications on SPI and I2C serial buses.

Provide DMA descriptors to utilize this capability in the future.

Note, I2C6, which is available to user, has no DMA request lines connected.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2019-03-10 08:17:00 +08:00
Andy Shevchenko
1d2825aa30 x86: acpi: Add DMA descriptors for SPI5 on Intel Tangier
Intel Tangier SoC has a general purpose DMA which can serve to speed up
communications on SPI and I2C serial buses.

Provide DMA descriptors to utilize this capability in the future.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2019-03-10 08:17:00 +08:00
Marek Vasut
7544ad0303 ARM: socfpga: Disable D cache in SPL
The bootrom seems to leave the D-cache in messed up state, make sure
the SPL disables it so it can not interfere with operation.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Chin Liang See <chin.liang.see@intel.com>
Cc: Dinh Nguyen <dinguyen@kernel.org>
Cc: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
Cc: Tien Fong Chee <tien.fong.chee@intel.com>
2019-03-09 17:59:13 +01:00
Dinh Nguyen
532a54e652 ARM: socfpga: fix data and tag latency values for pl310 cache controller
The values for the data and tag latency settings on the PL310 caches
controller is an (n-1). For example, the "arm,tag-latency" is specified
as <1 1 1>, so the values that should be written to register should be
0x000. And for the "arm,data-latency" specified as <2 1 1>, the register
value should be 0x010.

Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
2019-03-09 17:59:13 +01:00
Eugeniu Rosca
3a4511ce4a ARM: dts: rmobile: Zap redundant USB/SDHI nodes on M3N
v2019.01 commit cbff9f80ce ("ARM: dts: rmobile: Sync Gen3 DTs with
Linux 4.19.6") made the sdhi/usb nodes available in r8a77965.dtsi.

Hence, remove the SDHI/USB nodes from r8a77965-u-boot.dtsi. This is
equivalent to partially reverting below v2019.01 commits:
 - f529bc551b ("ARM: dts: rmobile: Extract USB nodes on M3N")
 - 830b94f768 ("ARM: dts: rmobile: Extract SDHI nodes on M3N")

Duplicating the nodes from <soc>.dtsi to <soc>-u-boot.dtsi is obviously:
 - not needed if no U-boot-specific changes are needed in those nodes.
 - potentially dangerous/error-prone, since the duplicated properties
   override the properties originally defined in <soc>.dtsi. One
   possible consequence is that <soc>.dtsi is getting an update from
   Linux, while <soc>-u-boot.dtsi stays unchanged. In this situation,
   the obsolete property values from <soc>-u-boot.dtsi will take
   precedence masking some of the <soc>.dtsi updates, potentially
   leading to all kind of obscure issues.

Below is the dtdiff of r8a77965-salvator-x-u-boot.dtb (the only "user"
of r8a77965-u-boot.dtsi) before and after the patch (slightly
reformatted to avoid 'git am/apply' issues and to reduce the width).

What below output means is there is already a mismatch in some of
SDHI/USB nodes between r8a77965.dtsi and r8a77965-u-boot.dtsi. Since no
U-Boot customization is needed in SDHI/USB DT nodes, get rid of them in
r8a77965-u-boot.dtsi.

$> dtdiff before-r8a77965-salvator-x-u-boot.dtb \
           after-r8a77965-salvator-x-u-boot.dtb
 --- /dev/fd/63  2019-03-09 12:57:40.877963983 +0100
 +++ /dev/fd/62  2019-03-09 12:57:40.877963983 +0100
 @@ -1471,7 +1471,7 @@
        bus-width = <0x4>;
        cd-gpios = <0x51 0xc 0x1>;
        clocks = <0x6 0x1 0x13a>;
 -      compatible = "renesas,sdhi-r8a77965";
 +      compatible = "renesas,sdhi-r8a77965", "renesas,rcar-gen3-sdhi";
        interrupts = <0x0 0xa5 0x4>;
        max-frequency = <0xc65d400>;
        pinctrl-0 = <0x4d>;
 @@ -1492,7 +1492,7 @@

      sd@ee120000 {
        clocks = <0x6 0x1 0x139>;
 -      compatible = "renesas,sdhi-r8a77965";
 +      compatible = "renesas,sdhi-r8a77965", "renesas,rcar-gen3-sdhi";
        interrupts = <0x0 0xa6 0x4>;
        max-frequency = <0xbebc200>;
        power-domains = <0x1 0x20>;
 @@ -1504,7 +1504,7 @@
      sd@ee140000 {
        bus-width = <0x8>;
        clocks = <0x6 0x1 0x138>;
 -      compatible = "renesas,sdhi-r8a77965";
 +      compatible = "renesas,sdhi-r8a77965", "renesas,rcar-gen3-sdhi";
        fixed-emmc-driver-type = <0x1>;
        interrupts = <0x0 0xa7 0x4>;
        max-frequency = <0xbebc200>;
 @@ -1526,7 +1526,7 @@
        bus-width = <0x4>;
        cd-gpios = <0x5a 0xf 0x1>;
        clocks = <0x6 0x1 0x137>;
 -      compatible = "renesas,sdhi-r8a77965";
 +      compatible = "renesas,sdhi-r8a77965", "renesas,rcar-gen3-sdhi";
        interrupts = <0x0 0xa8 0x4>;
        max-frequency = <0xc65d400>;
        pinctrl-0 = <0x56>;
 @@ -1868,14 +1868,14 @@

      usb-phy@ee0a0200 {
        #phy-cells = <0x0>;
 -      clocks = <0x6 0x1 0x2be>;
 +      clocks = <0x6 0x1 0x2bf>;
        compatible = "renesas,usb2-phy-r8a77965", "renesas,rcar-gen3-usb2-phy";
        phandle = <0x47>;
        pinctrl-0 = <0x4c>;
        pinctrl-names = "default";
        power-domains = <0x1 0x20>;
        reg = <0x0 0xee0a0200 0x0 0x700>;
 -      resets = <0x6 0x2be>;
 +      resets = <0x6 0x2bf>;
        status = "okay";
      };

Signed-off-by: Eugeniu Rosca <erosca@de.adit-jv.com>
2019-03-09 17:57:04 +01:00
Marek Vasut
fc3ed156f9 ARM: dts: rmobile: Force 1-bit bus width on Gen2 QSPI
U-Boot currently uses Gen2 QSPI in 1-bit mode, enforce it until
we can do better using the new SPI NOR framework.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2019-03-09 17:57:04 +01:00
Tom Rini
85887300ae Merge git://git.denx.de/u-boot-fsl-qoriq
- Enable DHCP as boot-source in distro boot for NXP layerscape
  platforms
- fix register layout for SEC on Layerscape architectures
- fixes related to DPAA2 ethernet
2019-03-04 13:05:53 -05:00
Laurentiu Tudor
7122f79141 armv8: fsl-layerscape: avoid DT fixup warning
sec_firmware reserves JR3 for it's own usage and deletes the JR3 node
from the device tree. This causes this warning to be issued when doing
the device tree fixup:

WARNING could not find node fsl,sec-v4.0-job-ring: FDT_ERR_NOTFOUND.

Fix it by excluding the device tree fixup for the JR reserved by
sec_firmware.

Signed-off-by: Laurentiu Tudor <laurentiu.tudor@nxp.com>
Reviewed-by: Horia Geanta <horia.geanta@nxp.com>
Reviewed-by: Bharat Bhushan <bharat.bhushan@nxp.com>
Reviewed-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
2019-03-03 22:01:14 +05:30
Laurentiu Tudor
e82d9ee73a armv8: fsl-layerscape: fix SEC QI ICID setup
The SEC QI ICID setup in the QIIC_LS register is actually an offset
that is being added to the ICID coming from the qman portal. Setting
it with a non-zero value breaks SMMU setup as the resulting ICID is
not known. On top of that, the SEC QI ICID must match the qman portal
ICIDs in order to share the isolation context.

Signed-off-by: Laurentiu Tudor <laurentiu.tudor@nxp.com>
Reviewed-by: Horia Geanta <horia.geanta@nxp.com>
Reviewed-by: Bharat Bhushan <bharat.bhushan@nxp.com>
Reviewed-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
2019-03-03 22:01:09 +05:30
Rajesh Bhagat
32413125b3 configs: fsl: move DDR specific defines to Kconfig
Moves below DDR specific defines to Kconfig:

CONFIG_FSL_DDR_BIST
CONFIG_FSL_DDR_FIRST_SLOT_QUAD_CAPABLE
CONFIG_FSL_DDR_INTERACTIVE
CONFIG_FSL_DDR_SYNC_REFRESH

Signed-off-by: Rajesh Bhagat <rajesh.bhagat@nxp.com>
Reviewed-by: York Sun <york.sun@nxp.com>
Reviewed-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
2019-03-03 20:56:01 +05:30
Heinrich Schuchardt
70eb82539b powerpc: enabled building with CONFIG_DM=y
Moving to the driver model requires CONFIG_DM to be enabled. Currently
several boards like kmeter1_defconfig produce a build error when CONFIG_DM
is enabled:

In file included from include/common.h:35,
                 from ./arch/powerpc/include/asm/fsl_lbc.h:10,
                 from include/mpc83xx.h:10,
                 from ./arch/powerpc/include/asm/ppc.h:27,
                 from ./arch/powerpc/include/asm/u-boot.h:18,
                 from include/dm/of.h:10,
                 from include/dm/ofnode.h:12,
                 from include/dm/device.h:13,
                 from include/linux/mtd/mtd.h:26,
                 from drivers/mtd/mtdconcat.c:25:
include/image.h: In function ‘image_check_target_arch’:
include/image.h:846:3: error: #error "please define IH_ARCH_DEFAULT in
                       your arch asm/u-boot.h"
 # error "please define IH_ARCH_DEFAULT in your arch asm/u-boot.h"
   ^~~~~
include/image.h:848:31: error: ‘IH_ARCH_DEFAULT’ undeclared (first use in
                        this function); did you mean ‘IH_ARCH_COUNT’?
  return image_check_arch(hdr, IH_ARCH_DEFAULT);

The error can be avoided by moving the definition of IH_ARCH_DEFAULT before

     #include <asm/ppc.h>

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Reviewed-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
2019-03-02 18:11:20 +05:30