Some section types don't have a simple _entries list. Use the GetEntries()
method in GetEntryContents() and other places to handle this.
This makes the behaviour more consistent.
Signed-off-by: Simon Glass <sjg@chromium.org>
This should be set up in the init function, to avoid a warning about a
property not set up there. Fix it.
Signed-off-by: Simon Glass <sjg@chromium.org>
When building from source, setuptools would complain about not finding
package via its auto-discovery mechanism. Manually specify how to
locate the files, relative to the package's directory.
* tools/u_boot_pylib/pyproject.toml: New tool.setuptools.packages.find
section.
Signed-off-by: Maxim Cournoyer <maxim.cournoyer@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Change the device type from "usb_mass_storage" to "usb" when
booting a script.
Before this change:
=> printenv devtype
devtype=usb_mass_storage
After this change:
=> printenv devtype
devtype=usb
Signed-off-by: John Clark <inindev@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
The loads and saves commands crash on the sandbox due to illegal memory
access.
For command line arguments the sandbox uses a virtual address space which
does not equal the addresses of the memory allocated with memmap(). Add the
missing address translations for the loads and saves commands.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
With sandbox and sandbox64 configurations:
In file included from .../u-boot/include/test/test.h:156,
from .../u-boot/include/test/lib.h:9,
from .../u-boot/test/lib/test_crc8.c:8:
.../u-boot/arch/sandbox/include/asm/test.h: In function ‘sandbox_sdl_set_bpp’:
.../u-boot/arch/sandbox/include/asm/test.h:323:17: error: ‘ENOSYS’ undeclared (first use in this function)
323 | return -ENOSYS;
| ^~~~~~
Per Tom Rini's suggestion:
move that function prototype over to arch/sandbox/include/asm/sdl.h
and make test/dm/video.c include <asm/sdl.h>
Cc: Simon Glass <sjg@chromium.org>
Suggested-by: Tom Rini <trini@konsulko.com>
Signed-off-by: Sergei Antonov <saproj@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
The behaviour of dev_read_addr_size() is surprising as it does not
handle #address-cells and #size-cells but instead hardcodes the values
based on sizeof(fdt_addr_t).
This is different from dev_read_addr_size_index() and
dev_read_addr_size_name() both of which do read the cell sizes from the
device tree.
Since dev_read_addr_size() is only used by a single driver and this
driver is broken when CONFIG_FDT_64BIT does not match the address size
in the device tree, fix the function to behave like all of the other
similarly named functions. Drop the property name argument as the only
caller passes "reg" and this is the expected property name matching the
other similarly named functions.
Signed-off-by: John Keeping <john@metanate.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Tested-by: Simon Glass <sjg@chromium.org> # chromebook_jerry
Tested-by: Simon Glass <sjg@chromium.org> # chromebook_bob
of_property_match_string calls of_find_property to search for the
string property.
If the device node does not exist, of_find_property returns NULL, and
of_property_match_string returns -EINVAL, which is correct.
However, if the device node exists, but the property is not found,
of_find_property still returns NULL, but it will place -FDT_ERR_NOTFOUND
in the *lenp variable.
of_property_match_string does not use the lenp parameter, thus this error
case is being lost, and treated as if the node is NULL, and returns
-EINVAL, which is incorrect.
The callers of of_property_match_string treat the error differently if
the return value is -EINVAL or -ENOENT, e.g. in dwc3 driver:
ret = generic_phy_get_by_name(dev, "usb3-phy", &phy);
if (!ret) {
ret = generic_phy_init(&phy);
if (ret)
return ret;
} else if (ret != -ENOENT && ret != -ENODATA) {
debug("could not get phy (err %d)\n", ret);
return ret;
} else {
phy.dev = NULL;
}
So the caller drivers will just consider the property missing if -ENOENT
is returned, versus the case of -EINVAL, which means something else.
To fix this situation, changed the code to call the of_find_property
with the right third argument to catch this error code and treat it
accordingly.
Signed-off-by: Eugen Hristev <eugen.hristev@collabora.com>
UEFI:
* test: avoid function name 'setup' in capsule tests to not treat it as
a fixture
* ensure that device paths for USB block devices are unique
* enable having multiple EFI_LOADER block devices
* use InstallMultipleProtocolInterfaces() in TCG protocol implementation to
increase UEFI compliance
-----BEGIN PGP SIGNATURE-----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=4YD0
-----END PGP SIGNATURE-----
Merge tag 'efi-2023-10-rc1-2' of https://source.denx.de/u-boot/custodians/u-boot-efi
Pull request efi-2023-10-rc1-2
UEFI:
* test: avoid function name 'setup' in capsule tests to not treat it as
a fixture
* ensure that device paths for USB block devices are unique
* enable having multiple EFI_LOADER block devices
* use InstallMultipleProtocolInterfaces() in TCG protocol implementation to
increase UEFI compliance
On devices with multiple USB mass storage devices errors like
Path /../USB(0x0,0x0)/USB(0x1,0x0)/Ctrl(0x0)
already installed.
are seen. This is due to creating non-unique device paths. To uniquely
identify devices we must provide path nodes for all devices on the path
from the root device.
Add support for generating device path nodes for all uclasses.
Reported-by: Suniel Mahesh <sunil@amarulasolutions.com>
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Do not assume that the preceding device path contains a single VenHW node.
Instead use the return value of dp_fill() which provides the address of the
next node.
Fixes: 23ad52fff4 ("efi_loader: device_path: support Sandbox's "host" devices")
Fixes: 19ecced71c ("efi_loader: device path for virtio block devices")
Fixes: 272ec6b453 ("efi_loader: device_path: support blkmap devices")
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
pytest 7.3.2 treats the function name 'setup' as a fixture [1].
This leads to errors like:
TypeError: setup() missing 2 required positional arguments:
'disk_img' and 'osindications'
Rename setup() to capsule_setup().
[1] How to run tests written for nose
https://docs.pytest.org/en/7.3.x/how-to/nose.html
Fixes: 482ef90aeb ("test: efi_capsule: refactor efi_capsule test")
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
The devnum value of the blk_desc structure starts from 0,
current efi_bl_create_block_device() function creates
two "efiblk#0" devices for the cases that blk_find_max_devnum()
returns -ENODEV and blk_find_max_devnum() returns 0(one device
found in this case).
This commit uses blk_next_free_devnum() instead of blk_find_max_devnum().
Signed-off-by: Masahisa Kojima <masahisa.kojima@linaro.org>
Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
A previous patch is removing the last consumer of efi_remove_protocol().
Switch that to static and treat it as an internal API in order to force
users install and remove protocols with the appropriate EFI functions.
It's worth noting that we still have files using efi_add_protocol(). We
should convert all these to efi_install_multiple_protocol_interfaces()
and treat efi_add_protocol() in a similar manner
Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
The TCG2 protocol currently adds and removes protocols with
efi_(add/remove)_protocol().
Removing protocols with efi_remove_protocol() might prove
problematic since it doesn't call DisconnectController() when
uninstalling the protocol and does not comply with the UEFI specification.
It's also beneficial for readability to have protocol installations and
removals in pairs -- IOW when efi_install_multiple_protocol_interfaces()
is called, efi_uninstall_multiple_protocol_interfaces() should be used to
remove it. So let's swap the efi_add_protocol() as well.
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
The call to efi_search_obj() is redundant as the function is called in
efi_search_protocol() too.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
- Merge in some Kconfig dependencies fixes, typo fixes, erofs update,
shell portability fix, an env save fix, better mbr+gpt support, and
some android A/B enhancements.
Set MMC clock when reverting to safe bus mode and speed
in case current MMC mode fails. Otherwise, trying out
the other modes may fail as well.
Reviewed-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Signed-off-by: Valentine Barshak <valentine.barshak@cogentembedded.com>
[hp: fallback to legacy_speed]
Signed-off-by: Hai Pham <hai.pham.ud@renesas.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
When tuning command (CMD21) fails with command error, call
mmc_send_stop_transmission() to send stop command (CMD12).
Reviewed-by: Takeshi Kihara <takeshi.kihara.df@renesas.com>
Reviewed-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Signed-off-by: Hai Pham <hai.pham.ud@renesas.com>
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
[Marek: Add dev_dbg() message in case tuning abort fails
Move tuning opcode check from mmc_abort_tuning()]
Reviewed-by: Peng Fan <peng.fan@nxp.com>
If a tuning command times out, the card could still be processing it,
which will cause problems for recovery. The eMMC specification section
6.6 Data transfer mode (cont’d) claims that CMD12 can be used to stop
CMD21:
"
The relationship between the various data transfer modes is summarized (see Figure 27):
- All data read commands can be aborted any time by the stop command (CMD12).
The data transfer will terminate and the Device will return to the Transfer State.
The read commands are: ... send tuning block (CMD21) ....
"
Add a function that does that.
Based on Linux commit [1] and [2].
[1] e711f0309109 ("mmc: mmc: Introduce mmc_abort_tuning()")
[2] 21adc2e45f4e ("mmc: Improve function name when aborting a tuning
cmd")
Reviewed-by: Takeshi Kihara <takeshi.kihara.df@renesas.com>
Reviewed-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Signed-off-by: Hai Pham <hai.pham.ud@renesas.com>
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
[Marek: Update commit message, quote relevant part of the specification.
Rename to mmc_send_stop_transmission().
Remove tuning opcode check, this is controller driver specific.
Deduplicate part of mmc_read_blocks() using this function.]
Reviewed-by: Peng Fan <peng.fan@nxp.com>
For MMC/eMMC, the MMC_CMD_STOP_TRANSMISSION response is R1 for read
transfers and R1b for write transfers per JEDEC Standard No. 84-B51
Page 126 . The response is R1b unconditionally per Physical Layer
Simplified Specification Version 9.00.
Correct the response type and add a comment about it.
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
When CONFIG_SYS_REDUNDAND_ENVIRONMENT is enabled, by default env is
getting saved to redundant environment irrespective of primary env is
present or not.
It means even if primary and redundant environment are not present, by
default, env is getting stored to redundant environment. Even if primary
env is present, it is choosing to store in redudndant env.
Ideally it should look for primary env and choose to store in primary env
if it is present. If both primary and redundant env are not present then
it should save in to primary env area.
Fix the issue by making env_valid = ENV_INVALID when both the
environments are not present.
Signed-off-by: Ashok Reddy Soma <ashok.reddy.soma@amd.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Some devices keep 2 copies of the bootloader_message in the misc
partition and write each in sequence when updating. This ensures that
there is always one valid copy of the bootloader_message. Teach u-boot
to optionally try a backup bootloader_message from a specified offset if
the primary one fails its CRC check.
Signed-off-by: Joshua Watt <JPEWhacker@gmail.com>
Forces the DOS partition type driver to be used when verifying the MBR.
This is particularly useful when using a hybrid MBR & GPT layout as
otherwise MBR verification would mostly likely fail since the GPT
partitions will be returned, even if the MBR is actually valid.
Signed-off-by: Joshua Watt <JPEWhacker@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Adds a test suite to ensure that part_get_info_by_type works correctly
by creating a hybrid GPT/MBR partition table and reading both.
Signed-off-by: Joshua Watt <JPEWhacker@gmail.com>
[trini: Add this on the other sandbox configs]
Signedd-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Adds part_driver_get_type() API which can be used to force a specific
driver to be used when getting partition information instead of relying
on auto detection.
Signed-off-by: Joshua Watt <JPEWhacker@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Improve the logging when the partition test fails so that it is clear
what went wrong, shown with actual values.
Signed-off-by: Joshua Watt <JPEWhacker@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
d94d9844bc ("dm: part: Update test to use mmc2") attempted to make the
test use mmc2, but the change was incomplete in that it didn't also
change the strings that reference a specific partition. Fix these so
that the test passes again
Signed-off-by: Joshua Watt <JPEWhacker@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
If test_cat and test_xxd cannot create the required file, the test will
be skipped, but this would result in an exception being raised in the
finally block because the file didn't exist to be cleaned up. This
caused the test to be marked as failed instead of skipped.
Signed-off-by: Joshua Watt <JPEWhacker@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
It is is sometimes desired to be able to skip decrementing the number of
tries remaining in an Android A/B boot, and instead just check which
slot will be tried later. This can commonly be be the case for platforms
that want to A/B u-boot itself, but are required to boot from a FAT MBR
partition. In these cases, u-boot must do an early check that the MBR
points to the correct A/B boot partition, and if not rewrite the MBR to
point to the correct one and reboot. Decrementing the try count in this
case is not desired because it means that each u-boot might constantly
ping-pong overwriting the MBR and rebooting until all the retries are
used up.
Signed-off-by: Joshua Watt <JPEWhacker@gmail.com>
Set default y based on common BOOT_DEFAULTS instead of DISTRO_DEFAULTS.
No change is intended, affected options is already implied for DISTRO
and BOOTSTD due to BOOT_DEFAULTS imply DOS_PARTITION (USB_STORAGE),
EFI_PARTITION and ISO_PARTITION.
Fixes: a0c739c184 ("boot: Create a common BOOT_DEFAULTS for distro and bootstd")
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Reviewed-by: Simon Glass <sjg@chromium.org>
When CONFIG_CMD_MMC and CONFIG_MMC are disabled, still some compilation
errors are seen as below due to unresolved symbols.
drivers/dfu/dfu_mmc.o: in function `mmc_block_op':
drivers/dfu/dfu_mmc.c:32: undefined reference to `find_mmc_device'
drivers/dfu/dfu_mmc.c:54: undefined reference to `mmc_get_blk_desc'
drivers/dfu/dfu_mmc.c:67: undefined reference to `mmc_get_blk_desc'
drivers/dfu/dfu_mmc.c:70: undefined reference to `mmc_get_blk_desc'
drivers/dfu/dfu_mmc.o: in function `dfu_fill_entity_mmc':
drivers/dfu/dfu_mmc.c:369: undefined reference to `find_mmc_device'
drivers/dfu/dfu_mmc.c:376: undefined reference to `mmc_init'
drivers/dfu/dfu_mmc.c:403: undefined reference to `mmc_get_blk_desc'
gnu/aarch64/lin/aarch64-linux/bin/aarch64-linux-gnu-ld.bfd: line 4:
31661 Segmentation fault (core dumped) $CC --sysroot=$LIBC
--no-warn-rwx-segment "$@"
Makefile:1760: recipe for target 'u-boot' failed
make: *** [u-boot] Error 139
make: *** Deleting file 'u-boot'
Add dependency of CONFIG_MMC for CONFIG_DFU_MMC config to fix the errors.
Signed-off-by: Ashok Reddy Soma <ashok.reddy.soma@amd.com>
This patch updates erofs driver code to catch up with the latest code of
erofs_utils (commit e4939f9eaa177e05d697ace85d8dc283e25dc2ed).
LZMA will be supported in the separate patch later.
Signed-off-by: Yifan Zhao <zhaoyifan@sjtu.edu.cn>
Reviewed-by: Huang Jianan <jnhuang95@gmail.com>
Busybox sort does not handle --field-separator== , replace this
with --field-separator='=' for maximum compatibility.
Fixes: cc5a490cf4 ("Makefile: Sort u-boot-initial-env output")
Reported-by: Milan P. Stanić <mps@arvanta.net>
Signed-off-by: Marek Vasut <marex@denx.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
Fix it to 'boot' in the header, as it is in the source file.
Signed-off-by: Julien Delbergue <j.delbergue.foss@gmail.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
This is more convenient since it does not require a video BIOS. Enable
it for QEMU.
Also drop use of video in SPL for the 64-bit QEMU, since it not needed
now.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Bochs is convenient with QEMU on x86 since it does not require a video
BIOS. Add a driver for it.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
U-Boot sets up the ACPI tables during startup. Rather than creating a
new set, install the existing ones. Create a memory-map record to cover
the tables.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
With x86 we set up the ACPI tables on startup so they can be examined. Do
the same with sandbox, so it is consistent.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
The output is garbled when tiny printf() is used. Correct this by adding
a special case.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Some boards need to access GPIOs to determine which SDRAM is fitted to the
board, for example chromebook_link. Probe this device (if it exists) to
make sure that this works as expected.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Add the required tag so that micron memory can be set up correctly.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Move from using debug() to log_debug() so that we don't have to use the
__func__ parameter and can access other logging features.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
The ACPI tables are special in that they are passed to EFI as a separate
piece, independent of other tables.
Also they can be spread over two areas of memory, e.g. with QEMU we end
up with tables kept in high memory as well.
Add new global_data fields to hold this information and update the bdinfo
command to show the table areas.
Move the rom_table_end variable into the loop that uses it.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
The implementation of write_tables() is confusing because it uses the
rom_table_start variable as the address pointer as it progresses.
Rename it to rom_addr to make the code clearer. Move the rom_table_end
variable into the block where it is used.
Also update logging to use the ACPI category, now that it is available.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
