Commit graph

27314 commits

Author SHA1 Message Date
Simon Glass
ac395f088f dm: i2c: config: Enable I2C for sandbox using driver model
Enable the options to bring up I2C on sandbox. Also enable all the available
I2C commands for testing purposes.

Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: Heiko Schocher <hs@denx.de>
2014-12-11 13:18:43 -07:00
Simon Glass
6ec1b75358 dm: i2c: Add an I2C EEPROM simulator
To enable testing of I2C, add a simple I2C EEPROM simulator for sandbox.
It supports reading and writing from a small data store.

Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: Heiko Schocher <hs@denx.de>
Reviewed-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
2014-12-11 13:18:42 -07:00
Simon Glass
d19de0d314 dm: i2c: Add a sandbox I2C driver
This driver includes some test features such as only supporting certain
bus speeds. It passes its I2C traffic through to an emulator.

Acked-by: Heiko Schocher <hs@denx.de>
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
2014-12-11 13:18:42 -07:00
Simon Glass
c70c71d833 dm: i2c: Add I2C emulation driver for sandbox
In order to test I2C we need some sort of emulation interface. Add hooks
to allow a driver to emulate an I2C device for sandbox.

Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: Heiko Schocher <hs@denx.de>
Reviewed-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
2014-12-11 13:18:42 -07:00
Simon Glass
63656b762e dm: i2c: Implement driver model support in the i2c command
The concept of a 'current bus' is now implemented in the command line
rather than in the uclass. Also the address length does not need to
be specified with each command - really we should consider dropping
this from most commands but it works OK for now.

Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: Heiko Schocher <hs@denx.de>
Reviewed-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
2014-12-11 13:18:42 -07:00
Simon Glass
c6202d857e dm: i2c: Add a uclass for I2C
The uclass implements the same operations as the current I2C framework but
makes some changes to make it fit driver model better:

- Remove the chip address from API calls
- Remove the address length from API calls
- Remove concept of 'current' I2C bus
- Drop all existing init functions

Acked-by: Heiko Schocher <hs@denx.de>
Reviewed-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Signed-off-by: Simon Glass <sjg@chromium.org>
2014-12-11 13:18:42 -07:00
Przemyslaw Marczak
59345b1f0f lib: errno: introduce errno_str(): returns errno related message
The functions error's numbers are standarized - but the error
messages are not.

The errors are often handled with unclear error messages,
so why not use an errno standarized messages.

Advantages:
- This could decrease the binary size.
- Appended with a detailed information,
  the error message will be clear.

This commit introduces new function:
- const char *errno_to_str(int errno)

The functions returns a pointer to the errno corresponding text message:
- if errno is null or positive number - a pointer to "Success" message
- if errno is negative - a pointer to errno related message

Signed-off-by: Przemyslaw Marczak <p.marczak@samsung.com>
Reviewed-by: Tom Rini <trini@ti.com>
2014-12-11 13:18:41 -07:00
Simon Glass
115066666c dm: rpi: Move serial to driver model
Adjust the configuration to use the driver model version of the pl01x
serial driver. Add the required platform data.

Signed-off-by: Simon Glass <sjg@chromium.org>
Tested-by: Stephen Warren <swarren@wwwdotorg.org>
2014-12-11 13:18:41 -07:00
Simon Glass
59c73d7555 dm: serial_pl01x: Add missing private data size
The private data size is missing from the driver, so we store it at 0,
which causes problems when something overwrites memory at 0.

Fix this.

Change-Id: I6f551ee905b0064ae8343e41e46450c37c8c8c1a
Signed-off-by: Simon Glass <sjg@chromium.org>
Tested-by: Stephen Warren <swarren@wwwdotorg.org>
2014-12-11 13:18:41 -07:00
Masahiro Yamada
a56642c7ba dm_test: improve the appearance shown by "dm tree" command
The command "dm tree" lists devices in a tree-like format.
This commit makes it look more like what the Unix command "tree"
shows.

=> dm tree
 Class       Probed   Name
----------------------------------------
 root        [ + ]    root_driver
 demo        [   ]    |-- demo_shape_drv
 demo        [   ]    |-- demo_simple_drv
 demo        [   ]    |-- demo_shape_drv
 demo        [   ]    |-- demo_simple_drv
 demo        [   ]    |-- demo_shape_drv
 test        [   ]    |-- test_drv
 test        [   ]    |-- test_drv
 test        [   ]    |-- test_drv
 gpio        [   ]    |-- gpio_sandbox
 serial      [   ]    |-- serial_sandbox
 serial      [ + ]    |-- serial
 demo        [   ]    |-- triangle
 demo        [   ]    |-- square
 demo        [   ]    |-- hexagon
 gpio        [   ]    |-- gpios
 spi         [   ]    |-- spi@0
 spi_emul    [   ]    |   `-- flash@0
 cros_ec     [ + ]    `-- cros-ec@0

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
2014-12-11 13:18:41 -07:00
Masahiro Yamada
80d9ef8d40 lib: string: move strlcpy() to a common place
Move strlcpy() definition from drivers/usb/gadget/ether.c to
lib/string.c because it is a very useful function.
Let's add the prototype to include/linux/string.h too.

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Acked-by: Simon Glass <sjg@chromium.org>
2014-12-11 13:18:41 -07:00
Tom Rini
9b416a9f4c Merge branch 'master' of git://www.denx.de/git/u-boot-imx 2014-12-10 09:07:25 -05:00
Tom Rini
d51aae6423 Merge branch 'rmobile' of git://git.denx.de/u-boot-sh 2014-12-10 09:07:06 -05:00
Nobuhiro Iwamatsu
2b8c0814f8 arm: rmobile: alt: Add support MMC and MMC command
Alt board has been connected to eMMC of 8GB to MMC port.
This enables MMC port and MMC command.

Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com>
Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2014-12-10 14:32:22 +09:00
Nobuhiro Iwamatsu
d7916b1d38 arm: rmobile: lager: Add support MMC and MMC command
Lager board has been connected to eMMC of 8GB to MMC1 port.
This enables MMC1 port and MMC command.

Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com>
Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2014-12-10 14:32:18 +09:00
Nobuhiro Iwamatsu
9427c610cd arm: rmobile: rcar: Add support ext2 and ext4 file system
Board with R-Car SoC has USB and MMC. They might use the EXT2 or EXT4 file system.
This adds support ext2 and ext4 file system

Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com>
Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2014-12-10 14:32:14 +09:00
Nobuhiro Iwamatsu
3183c2a0cb arm: rmobile: Add mmc.h for sh_mmcif of rmobile
R-Mobile and R-Car ARM SoCs use sh_mmcif as MMC host driver.
This adds arch-rmobile/mmc.h that defines mmcif_mmc_init().

Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com>
Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2014-12-10 14:32:11 +09:00
Vikas Manocha
39e4795a79 dm: stv0991: Move serial to driver model
Signed-off-by: Vikas Manocha <vikas.manocha@st.com>
2014-12-09 15:16:20 -05:00
Vikas Manocha
498b7c2ecc stv0991: increase the initial ram size config
It is done to make space available for driver model memory.

Signed-off-by: Vikas Manocha <vikas.manocha@st.com>
2014-12-09 15:16:20 -05:00
Vikas Manocha
c55e759123 stv0991: enable default and misc command configs
Signed-off-by: Vikas Manocha <vikas.manocha@st.com>
2014-12-09 15:16:20 -05:00
Vikas Manocha
2ce4eaf4c8 stv0991: enable ethernet support
Signed-off-by: Vikas Manocha <vikas.manocha@st.com>
2014-12-09 15:16:19 -05:00
Vikas Manocha
9fa32b1237 stv0991: Add basic stv0991 architecture support
stv0991 architecture support added. It contains the support for
following blocks
- Timer
- uart

Signed-off-by: Vikas Manocha <vikas.manocha@st.com>
[trini: Add arch/arm/cpu/armv7/Makefile hunk]
Signed-off-by: Tom Rini <trini@ti.com>
2014-12-09 15:16:01 -05:00
Tom Rini
32fdf0e4d8 Prepare v2015.01-rc3
Signed-off-by: Tom Rini <trini@ti.com>
2014-12-08 16:35:08 -05:00
Tom Rini
272a1acf1e Merge git://git.denx.de/u-boot-mpc85xx 2014-12-08 16:35:07 -05:00
Tom Rini
98d2d5e8c4 Merge branch 'master' of git://git.denx.de/u-boot-ti 2014-12-08 16:35:06 -05:00
Tom Rini
8bd60ccf53 Merge git://git.denx.de/u-boot-i2c 2014-12-08 16:35:05 -05:00
Tom Rini
0fffbd26d5 Merge branch 'master' of git://git.denx.de/u-boot-uniphier 2014-12-08 16:35:05 -05:00
Masahiro Yamada
7a3620b246 ARM: UniPhier: detect the number of flash banks at run-time
Some UniPhier boards are equipped with an expansion slot that
some optional SRAM/NOR-flash cards can be attached to.  So, run-time
detection of the number of flash banks would be more user-friendly.

Until this commit, UniPhier boards have achieved this by (ab)using
board_flash_wp_on() because the boot failed if flash_size got zero.
Fortunately, this problem was solved by commit 70879a9256 (flash:
do not fail even if flash_size is zero).

Now it is possible to throw away such a tricky workaround.  This
commit also enables CONFIG_SYS_MAX_FLASH_BANKS_DETECT for further
refactoring.

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
2014-12-09 00:08:33 +09:00
Masahiro Yamada
dc7246e725 ARM: UniPhier: extend register area of init page table for PH1-sLD3
0x20000000-0x2fffffff: assigned to ARM mpcore (sLD3 only)
0xf0000000-0xffffffff: assigned to Denali NAND controller (sLD3 only)

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
2014-12-09 00:08:33 +09:00
Masahiro Yamada
230ce30a51 ARM: UniPhier: add device tree sources for PH1-sLD3
Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
2014-12-09 00:08:26 +09:00
Masahiro Yamada
f5fd7afcd5 ARM: UniPhier: add more device nodes to device tree
Add I2C controller and NAND controller devices.  Fix indentation too.

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
2014-12-09 00:05:46 +09:00
Tom Rini
1a9c8f12f2 Merge branch 'master' of git://git.denx.de/u-boot-sh 2014-12-08 09:36:26 -05:00
Tom Rini
0eaadecb40 doc/gitmail-rc: Update m68k alias
Signed-off-by: Tom Rini <trini@ti.com>
2014-12-08 09:35:48 -05:00
Peter Kümmel
60cd06e13c kconfig: Fix warning "‘jump’ may be used uninitialized"
Warning:
In file included from scripts/kconfig/zconf.tab.c:2537:0:
scripts/kconfig/menu.c: In function ‘get_symbol_str’:
scripts/kconfig/menu.c:590:18: warning: ‘jump’ may be used uninitialized in this function [-Wmaybe-uninitialized]
     jump->offset = strlen(r->s);

Simplifies the test logic because (head && local) means (jump != 0)
and makes GCC happy when checking if the jump pointer was initialized.

Signed-off-by: Peter Kümmel <syntheticpp@gmx.net>
Signed-off-by: Michal Marek <mmarek@suse.cz>
[ imported from Linux Kernel, commit 2d5603060967 ]
Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
2014-12-08 09:35:48 -05:00
Masahiro Yamada
61eb5d72ab libfdt: move CONFIG_OF_LIBFDT and CONFIG_FIT to lib/Makefile
Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
2014-12-08 09:35:47 -05:00
Masahiro Yamada
77d2675022 libfdt: descend from lib/ to lib/libfdt/
Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
2014-12-08 09:35:47 -05:00
Masahiro Yamada
f071c50190 lib: bzip2: move bzip2 files to lib/bzip2/ directory
Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
2014-12-08 09:35:47 -05:00
Suriyan Ramasami
48aead71c1 fdt: Allow non-FDT kernels to boot when CONFIG_OF_LIBFDT is defined
The boot commands - bootz/bootm mandate a third argument which is the
address to the FDT blob. In cases where this argument is not specified,
boot fails with a message indicating a missing FDT.

This causes non-FDT kernels to fail to boot. This patch allows both FDT
and non-FDT kernels to boot by making the third parameter to the bootm/bootz
optional.

Signed-off-by: Suriyan Ramasami <suriyan.r@gmail.com>
Acked-by: Simon Glass <sjg@chromium.org>
[trini: Update again for covering appended DTB case after last revert in
this area]
Signed-off-by: Tom Rini <trini@ti.com>
2014-12-08 09:35:47 -05:00
Masahiro Yamada
8b923a56dc blackfin: include <linux/compiler.h> rather than define __iomem
The macro __iomem is defined in include/linux/compiler.h.
Let's include it rather than double __iomem defines.

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Cc: Sonic Zhang <sonic.adi@gmail.com>
2014-12-08 09:35:46 -05:00
Masahiro Yamada
063ec38a75 linux/compat.h: remove redundant macro defines
__user and __iomem are defined in include/linux/compiler.h.
MAX_ERRNO is defined in include/linux/err.h.

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
2014-12-08 09:35:46 -05:00
Masahiro Yamada
afc366f01b Replace <compiler.h> with <linux/compiler.h>
Including <linux/compiler.h> is enough for general use.

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
2014-12-08 09:35:46 -05:00
Daniel Schwierzeck
e873b97a01 git-mailrc: fix mips alias
Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2014-12-08 09:35:46 -05:00
angelo@sysam.it
4b3a326046 Add Alison Wang m68k custodian email/alias
Signed-off-by: Angelo Dureghello <angelo@sysam.it>
2014-12-08 09:35:45 -05:00
angelo@sysam.it
82ebb7e515 Add custodians to the m68k subsystem. 2014-12-08 09:35:45 -05:00
Daniel Schwierzeck
e19db555b4 Kbuild: introduce Makefile in arch/$ARCH/
Introduce a Makefile under arch/$ARCH/ and include it in the
top Makefile (similar to Linux kernel). This allows further
refactoringi like moving architecture-specific code out of global
makefiles, deprecating config variables (CPU, CPUDIR, SOC) or
deprecating arch/$ARCH/config.mk.

In contrary to Linux kernel, U-Boot defines the ARCH variable by
Kconfig, thus the arch Makefile can only included conditionally
after the top config.mk.

Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
Acked-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
2014-12-08 09:35:45 -05:00
Vikas Manocha
eb8a4fe0dc serial: pl01x: avoid pl01x type check two times
Signed-off-by: Vikas Manocha <vikas.manocha@st.com>
Acked-by: Simon Glass <sjg@chromium.org>
2014-12-08 09:35:45 -05:00
Vikas Manocha
f7e517b4eb serial: pl01x: disable as per type of pl01x
pl010 & pl011 have different control register offsets, setting it as per
the pl01x type.

Signed-off-by: Vikas Manocha <vikas.manocha@st.com>
Acked-by: Simon Glass <sjg@chromium.org>
2014-12-08 09:35:44 -05:00
Vikas Manocha
d2ca9fd2cd serial: pl01x: move all line control at same place
Receive line control uses same setting as transmit line control, also one lcrh
write is effective for both baud rate & receive line control internal update.

Signed-off-by: Vikas Manocha <vikas.manocha@st.com>
Acked-by: Simon Glass <sjg@chromium.org>
2014-12-08 09:35:44 -05:00
Vikas Manocha
2df810717e serial: pl01x: fix pl011 baud rate configuration
UART_IBRD, UART_FBRD, and UART_LCR_H form a single 30-bit wide register which
is updated on a single write strobe generated by a UART_LCR_H write. So, to
internally update the content of UART_IBRD or UART_FBRD, a write to UART_LCR_H
must always be performed at the end.

Signed-off-by: Vikas Manocha <vikas.manocha@st.com>
Acked-by: Simon Glass <sjg@chromium.org>
2014-12-08 09:35:44 -05:00
Vikas Manocha
a7deea691c serial: pl01x: pass pl01x_type to set baudrate
Although we were checking the pl01x type, seems like PL010 type was being
passed by mistake.

Signed-off-by: Vikas Manocha <vikas.manocha@st.com>
Acked-by: Simon Glass <sjg@chromium.org>
2014-12-08 09:35:44 -05:00