Commit graph

84138 commits

Author SHA1 Message Date
Tom Rini
f16b1a6c00 spl: Migrate SYS_SATA_FAT_BOOT_PARTITION to Kconfig
This moves SYS_SATA_FAT_BOOT_PARTITION to Kconfig and enforces the
current default via Kconfig rather than C code.

Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2022-12-05 16:06:07 -05:00
Tom Rini
2db82bf2bd Convert CONFIG_SYS_PMAN et al to Kconfig
This converts the following to Kconfig:
   CONFIG_NOBQFMAN
   CONFIG_SYS_DPAA_DCE
   CONFIG_SYS_DPAA_FMAN
   CONFIG_SYS_DPAA_PME
   CONFIG_SYS_DPAA_RMAN
   CONFIG_SYS_PMAN

Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2022-12-05 16:06:07 -05:00
Tom Rini
ecc8d425fd global: Move remaining CONFIG_SYS_PCI* to CFG_SYS_PCI*
The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_PCI and
CONFIG_SYS_PCIE namespace do not easily transition to Kconfig. In many
cases they likely should come from the device tree instead. Move these
out of CONFIG namespace and in to CFG namespace.

Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2022-12-05 16:06:07 -05:00
Tom Rini
789bb9537a Convert CONFIG_SYS_OMAP_ABE_SYSCK to Kconfig
This converts the following to Kconfig:
   CONFIG_SYS_OMAP_ABE_SYSCK

Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2022-12-05 16:06:07 -05:00
Tom Rini
3408d96e6c Remove unused symbols
This commit removes the following unused symbols:
   CONFIG_SYS_NVRAM_BASE_ADDR
   CONFIG_SYS_NVRAM_SIZE
   CONFIG_SYS_PAXE_BASE
   CONFIG_SYS_PCCNT
   CONFIG_SYS_PCDAT
   CONFIG_SYS_PCDDR
   CONFIG_SYS_PCI1_ADDR
   CONFIG_SYS_PCI2_ADDR
   CONFIG_SYS_PCI1_IO_BUS
   CONFIG_SYS_PCI1_IO_SIZE
   CONFIG_SYS_PCI1_MEM_BUS
   CONFIG_SYS_PCI1_MEM_SIZE
   CONFIG_SYS_PCIE3_ADDR
   CONFIG_SYS_PCIE4_ADDR
   CONFIG_SYS_PCIE3_IO_PHYS
   CONFIG_SYS_PCIE3_IO_VIRT
   CONFIG_SYS_PCIE4_IO_PHYS
   CONFIG_SYS_PCIE4_IO_VIRT
   CONFIG_SYS_PLL_SETTLING_TIME
   CONFIG_SYS_QMAN_CENA_BASE
   CONFIG_SYS_QMAN_SP_CENA_SIZE
   CONFIG_SYS_RCAR_I2C0_BASE
   CONFIG_SYS_RCAR_I2C1_BASE
   CONFIG_SYS_RCAR_I2C2_BASE
   CONFIG_SYS_RCAR_I2C3_BASE
   CONFIG_SYS_SATA
   CONFIG_SYS_SDRAM_BASE2
   CONFIG_SYS_SGMII_REFCLK_MHZ
   CONFIG_SYS_SGMII_LINERATE_MHZ
   CONFIG_SYS_SGMII_RATESCALE
   CONFIG_SYS_SH_SDHI0_BASE
   CONFIG_SYS_SH_SDHI0_BASE
   CONFIG_SYS_SH_SDHI1_BASE
   CONFIG_SYS_SH_SDHI2_BASE
   CONFIG_SYS_SH_SDHI3_BASE
   CONFIG_SYS_SPI_ST_ENABLE_WP_PIN
   CONFIG_SYS_SPI_U_BOOT_SIZE
   CONFIG_SYS_VCXK_ACKNOWLEDGE_DDR
   CONFIG_SYS_VCXK_ACKNOWLEDGE_PIN
   CONFIG_SYS_VCXK_ACKNOWLEDGE_PORT
   CONFIG_SYS_VCXK_BASE
   CONFIG_SYS_VCXK_DEFAULT_LINEALIGN
   CONFIG_SYS_VCXK_DOUBLEBUFFERED
   CONFIG_SYS_VCXK_ENABLE_DDR
   CONFIG_SYS_VCXK_ENABLE_PIN
   CONFIG_SYS_VCXK_ENABLE_PORT
   CONFIG_SYS_VCXK_INVERT_DDR
   CONFIG_SYS_VCXK_INVERT_PIN
   CONFIG_SYS_VCXK_INVERT_PORT
   CONFIG_SYS_VCXK_REQUEST_DDR
   CONFIG_SYS_VCXK_REQUEST_PIN
   CONFIG_SYS_VCXK_REQUEST_PORT
   CONFIG_SYS_VSC7385_BR_PRELIM
   CONFIG_SYS_VSC7385_OR_PRELIM

Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2022-12-05 16:06:07 -05:00
Tom Rini
a6b537266f rtc: Remove unused drivers
These RTC drivers are currently unused and reference other unused CONFIG
variables, so remove them.

Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2022-12-05 16:06:07 -05:00
Tom Rini
cdc5ed8f1f global: Move remaining CONFIG_SYS_NUM_* to CFG_SYS_NUM_*
The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_NUM
namespace do not easily transition to Kconfig. In many cases they likely
should come from the device tree instead. Move these out of CONFIG
namespace and in to CFG namespace.

Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2022-12-05 16:06:07 -05:00
Tom Rini
91092132ba global: Move remaining CONFIG_SYS_NS16550_* to CFG_SYS_NS16550_*
The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_NS16550
namespace do not easily transition to Kconfig. In many cases they likely
should come from the device tree instead. Move these out of CONFIG
namespace and in to CFG namespace.

Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2022-12-05 16:06:07 -05:00
Tom Rini
9591b63531 Convert CONFIG_SYS_NS16550_MEM32 et al to Kconfig
This converts the following to Kconfig:
   CONFIG_SPL_NS16550_MIN_FUNCTIONS
   CONFIG_SYS_NS16550_MEM32
   CONFIG_SYS_NS16550_PORT_MAPPED
   CONFIG_SYS_NS16550_REG_SIZE
   CONFIG_SYS_NS16550_SERIAL

To do this we also introduce CONFIG_SPL_SYS_NS16550_SERIAL so that
platforms can enable the legacy driver here for SPL.

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-05 16:06:07 -05:00
Tom Rini
57c3afbc27 powerpc: Rename CONFIG_NS16550_MIN_FUNCTIONS
This symbol is specific to the PowerPC SPL implementation, so rename
this to reflect that it's in SPL and used / tested there, so that we can
then safely migrate it to Kconfig.

Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2022-12-05 16:05:38 -05:00
Tom Rini
0ed384fd2f global: Move remaining CONFIG_SYS_NOR_* to CFG_SYS_NOR_*
The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_NOR
namespace do not easily transition to Kconfig. In many cases they likely
should come from the device tree instead. Move these out of CONFIG
namespace and in to CFG namespace.

Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2022-12-05 16:05:38 -05:00
Tom Rini
4e5909450e global: Move remaining CONFIG_SYS_NAND_* to CFG_SYS_NAND_*
The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_NAND
namespace do not easily transition to Kconfig. In many cases they likely
should come from the device tree instead. Move these out of CONFIG
namespace and in to CFG namespace.

Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2022-12-05 16:05:38 -05:00
Tom Rini
0cd0325964 Convert CONFIG_SYS_NAND_SIZE to Kconfig
This converts the following to Kconfig:
   CONFIG_SYS_NAND_SIZE

Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2022-12-05 16:05:38 -05:00
Tom Rini
a9f03760c1 Convert CONFIG_SYS_NAND_PAGE_2K et al to Kconfig
This converts the following to Kconfig:
   CONFIG_SYS_NAND_PAGE_2K
   CONFIG_SYS_NAND_PAGE_4K

Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2022-12-05 16:05:38 -05:00
Tom Rini
1a792803d8 Convert CONFIG_SYS_NAND_NO_SUBPAGE_WRITE to Kconfig
This converts the following to Kconfig:
   CONFIG_SYS_NAND_NO_SUBPAGE_WRITE

Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2022-12-05 16:05:38 -05:00
Tom Rini
4d3495deb6 Convert CONFIG_SYS_NAND_MAX_OOBFREE et al to Kconfig
This converts the following to Kconfig:
   CONFIG_SYS_NAND_MAX_OOBFREE
   CONFIG_SYS_NAND_MAX_ECCPOS

Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2022-12-05 16:05:38 -05:00
Tom Rini
b41641d52e mtd: nand: raw: atmel_nand: Use ATMEL_BASE_ECC directly
This is the only driver, and only one platform makes use of, setting
CONFIG_SYS_NAND_ECC_BASE. Reference ATMEL_BASE_ECC directly in this
case.

Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2022-12-05 16:05:38 -05:00
Tom Rini
41fa8f471d Convert CONFIG_SYS_NAND_HW_ECC to Kconfig
This converts the following to Kconfig:
   CONFIG_SYS_NAND_HW_ECC

Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2022-12-05 16:05:38 -05:00
Tom Rini
60db32502c Convert CONFIG_SYS_NAND_HW_ECC_OOBFIRST to Kconfig
This converts the following to Kconfig:
   CONFIG_SYS_NAND_HW_ECC_OOBFIRST

Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2022-12-05 16:05:38 -05:00
Tom Rini
50493dd1f9 Remove unused symbols
This commit removes the following unused symbols:
   CONFIG_SYS_NAND_DDR_LAW
   CONFIG_SYS_NAND_ECCSTEPS
   CONFIG_SYS_NAND_ECCTOTAL
   CONFIG_SYS_NAND_ENABLE_PIN_SPL
   CONFIG_SYS_NAND_MX7_GPMI_62_ECC_BYTES
   CONFIG_SYS_NAND_U_BOOT_RELOC_SP

Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2022-12-05 16:05:38 -05:00
Tom Rini
715cce65b8 Convert CONFIG_SYS_NAND_DBW_8 et al to Kconfig
This converts the following to Kconfig:
   CONFIG_SYS_NAND_DBW_8
   CONFIG_SYS_NAND_DBW_16

Note that all instances of the code check for CONFIG_SYS_NAND_DBW_16
being defined, and then "else" to CONFIG_SYS_NAND_DBW_8 whereas all of
the configs set CONFIG_SYS_NAND_DBW_8. So we introduce
CONFIG_SYS_NAND_DBW_16 as an option.

Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2022-12-05 16:05:38 -05:00
Tom Rini
1c470f32f7 Prepare v2023.01-rc3
Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-05 15:21:53 -05:00
Tom Rini
6616ddb0f0 Merge branch '2022-12-05-add-IPv6-support'
To quote the author:
This patch set adds basic IPv6 support to U-boot.
It is based on Chris's Packham patches
(https://lists.denx.de/pipermail/u-boot/2017-January/279366.html)
Chris's patches were taken as base. There were efforts to launch it on
HiFive SiFive Unmatched board but the board didn't work well. The code was
refactored, fixed some bugs as CRC for little-endian, some parts were implemented in
our own way, something was taken from Linux. Finally we did manual tests and the
board worked well.

Testing was done on HiFive SiFive Unmatched board (RISC-V)
2022-12-05 13:28:22 -05:00
Viacheslav Mitrofanov
a72926257c configs: Add IPV6 config to sandbox_flattree_defconfig
Allow to use IPV6 tests in sandbox

Signed-off-by: Viacheslav Mitrofanov <v.v.mitrofanov@yadro.com>
2022-12-05 12:47:17 -05:00
Viacheslav Mitrofanov
bbd77c3e8b configs: Add IPV6 config to sandbox64_defconfig
Allow to use IPV6 tests in sandbox

Signed-off-by: Viacheslav Mitrofanov <v.v.mitrofanov@yadro.com>
2022-12-05 12:47:17 -05:00
Viacheslav Mitrofanov
3688cf5927 configs: Add IPV6 config to sandbox_defconfig
Allow to use IPV6 tests in sandbox

Signed-off-by: Viacheslav Mitrofanov <v.v.mitrofanov@yadro.com>
2022-12-05 12:47:17 -05:00
Viacheslav Mitrofanov
e4d30fd110 test: dm: eth: Add ip6_make_lladdr test
Add a test that checks generated Link Local Address. Use in sandbox

Signed-off-by: Viacheslav Mitrofanov <v.v.mitrofanov@yadro.com>
Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2022-12-05 12:47:17 -05:00
Viacheslav Mitrofanov
789a2c7d37 test: dm: eth: Add ip6_make_snma test
Add a test that checks generated Solicited Node Multicast Address from our
ipv6 address. Use in sandbox

Signed-off-by: Viacheslav Mitrofanov <v.v.mitrofanov@yadro.com>
Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2022-12-05 12:47:17 -05:00
Viacheslav Mitrofanov
8576dcdf00 test: dm: eth: Add ip6_addr_in_subnet test
Add a test if two address are in the same subnet. Use in sandbox

Signed-off-by: Viacheslav Mitrofanov <v.v.mitrofanov@yadro.com>
Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2022-12-05 12:47:17 -05:00
Viacheslav Mitrofanov
d9f5c41e9a test: dm: eth: Add csum_ipv6_magic test
Test checksum computation. csum_ipv6_magic() uses in upper layer
protocols as TCP/UDP/ICMPv6/etc to calculate payload checksum.

Series-changes: 3
- Fixed style problems

Signed-off-by: Viacheslav Mitrofanov <v.v.mitrofanov@yadro.com>
Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2022-12-05 12:47:17 -05:00
Viacheslav Mitrofanov
184ded4bec test: dm: eth: Add string_to_ip6 test
Add a test to check convertation from char* to struct in6_addr.
Use in sandbox

Series-changes: 3
- Fixed tests to use length param in string_to_ip6()

Series-changes: 5
- Add test under #ifdef

Signed-off-by: Viacheslav Mitrofanov <v.v.mitrofanov@yadro.com>
Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2022-12-05 12:47:17 -05:00
Viacheslav Mitrofanov
eeb0a2c693 net: ping6: Add ping6 command
Implement ping6 command to ping hosts using IPv6. It works the same way as
an ordinary ping command. There is no ICMP request so it is not possible
to ping our host. This patch adds options in Kconfig and Makefile to
build ping6 command.

Series-changes: 3
- Added structures and functions descriptions
- Added to ping6_receive() return value instead of void

Series-changes: 4
- Fixed structures and functions description style

Signed-off-by: Viacheslav Mitrofanov <v.v.mitrofanov@yadro.com>
Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2022-12-05 12:47:16 -05:00
Viacheslav Mitrofanov
7fbf230d79 net: tftp: Add IPv6 support for tftpboot
The command tftpboot uses IPv4 by default. Add the possibility to use IPv6
instead. If an address in the command is an IPv6 address it will use IPv6
to boot or if there is a suffix -ipv6 in the end of the command it also
force using IPv6. All other tftpboot features and parameters are left
the same.

Signed-off-by: Viacheslav Mitrofanov <v.v.mitrofanov@yadro.com>
Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2022-12-05 12:47:16 -05:00
Viacheslav Mitrofanov
ffdbf3bad5 net: ipv6: Incorporate IPv6 support into u-boot net subsystem
Add net_ip6_handler (an IPv6 packet handler) into net_loop. Add
neighbor discovery mechanism into network init process. That is the
main step to run IPv6 in u-boot. Now u-boot is capable to use NDP and
handle IPv6 packets.

Signed-off-by: Viacheslav Mitrofanov <v.v.mitrofanov@yadro.com>
Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2022-12-05 12:47:16 -05:00
Viacheslav Mitrofanov
1feb697830 net: ipv6: Add implementation of main IPv6 functions
Functions that were exposed in "net: ipv6: Add IPv6 basic primitives"
had only empty implementations and were exposed as API for futher
patches. This patch add implementation of these functions. Main
functions are: net_ip6_handler() - IPv6 packet handler for incoming
packets; net_send_udp_packet6() - make up and send an UDP packet;
csum_ipv6_magic() - compute checksum of IPv6 "psuedo-header" per RFC2460
section 8.1; ip6_addr_in_subnet() - check if an address is in our
subnet. Other functions are auxiliary.

Series-changes: 3
- Added comments
- Fixed style problems
- Fixed return codes instead of -1

Signed-off-by: Viacheslav Mitrofanov <v.v.mitrofanov@yadro.com>
Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2022-12-05 12:47:16 -05:00
Viacheslav Mitrofanov
43ab8ecc7d net: ipv6: Add ip6addr, gatewayip6, serverip6 variables callbacks
Implement actions on ip6addr, gatewayip6, serverip6 varaibles.
on_ip6addr - convert IPv6 string addr to struct ip6_addr
on_gatewayip6 - convert IPv6 string addr to struct ip6_addr
on_serverip6 - convert IPv6 string addr to struct ip6_addr

Series-changes: 3
- Removed memory allocation
- Substituted -1 for error code

Signed-off-by: Viacheslav Mitrofanov <v.v.mitrofanov@yadro.com>
Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2022-12-05 12:47:16 -05:00
Viacheslav Mitrofanov
d807199da7 net: ipv6: Enable IPv6 typeconversion specifier
Add the possibility to recognize IPv6 address in print function.
To output IPv6 address use %pI6 specifier.

Series-changes: 3
- Substituted #if (...) for if (...) to get better readability

Signed-off-by: Viacheslav Mitrofanov <v.v.mitrofanov@yadro.com>
Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2022-12-05 12:47:16 -05:00
Viacheslav Mitrofanov
2f7f2f2aa9 net: ipv6: Add string_to_ip6 converter
This functions is used as a converter from IPv6 address string notation
to struct ip6_addr that is used everywhere in IPv6 implementation. For
example it is used to parse and convert IPv6 address from tftpboot
command. Conversion algorithm uses two passes, first to verify syntax and
locate colons and second pass to read the address. In case of valid IPv6
address it returns 0.

Examples of valid strings:
	2001:db8::0:1234:1
	2001:0db8:0000:0000:0000:0000:1234:0001
	::1
	::ffff:192.168.1.1

Examples of invalid strings
	2001:db8::0::0          (:: can only appear once)
	2001:db8:192.168.1.1::1 (v4 part can only appear at the end)
	192.168.1.1             (we don't implicity map v4)

Series-changes: 3
- Added function description
- Added length parameter to string_to_ip6()

Series-changes: 4
- Fixed function description style

Signed-off-by: Viacheslav Mitrofanov <v.v.mitrofanov@yadro.com>
Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2022-12-05 12:47:16 -05:00
Viacheslav Mitrofanov
c6610e1d90 net: ipv6: Add Neighbor Discovery Protocol (NDP)
Implement basic of NDP. It doesn't include such things as Router
Solicitation, Router Advertisement and Redirect. It just has Neighbor
Solicitation and Neighbor Advertisement. Only these two features are used
in u-boot IPv6. Implementation of some NDP functions uses API that was
exposed in "net: ipv6: Add IPv6 basic primitives".

Also this patch inlcudes update in Makefile to build NDP.

Series-changes: 3
- Added structures and functions descriptions
- Fixed style problems

Series-changes: 4
- Fixed structures and functions description style

Signed-off-by: Viacheslav Mitrofanov <v.v.mitrofanov@yadro.com>
Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2022-12-05 12:47:16 -05:00
Viacheslav Mitrofanov
1dfa4ef14d net: ipv6: Add callbacks declarations to get access to IPv6 variables
Set up callbacks for main IPv6 variables ip6add, serverip6, gatewayip6
and set options to them in flag file. These variables are often set up by
users.

Signed-off-by: Viacheslav Mitrofanov <v.v.mitrofanov@yadro.com>
Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2022-12-05 12:47:16 -05:00
Viacheslav Mitrofanov
3cc04a3ab2 net: ipv6: Add IPv6 build options
Add options to Makefile and Kconfig file to build IPv6

Series-changes: 3
- Added help for IPv6 support

Signed-off-by: Viacheslav Mitrofanov <v.v.mitrofanov@yadro.com>
Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2022-12-05 12:47:16 -05:00
Viacheslav Mitrofanov
33b5066a59 net: ipv6: Add IPv6 basic primitives
This patch is a collection of basic primitives that are prerequisite for
further IPv6 implementation.

There are structures definition such as IPv6 header, UDP header
(for TFTP), ICMPv6 header. There are auxiliary defines such as protocol
codes, padding, struct size and etc. Also here are functions prototypes
and its empty implementation that will be used as API for further patches.
Here are variables declaration such as IPv6 address of our host,
gateway, ipv6 server.

Series-changes: 3
- Added functions and structures descriptions
- Removed enums ND_OPT_*. It will be moved into further patches
- Substituted -1 for error codes

Series-changes: 4
- Changed functions and structures description style

Signed-off-by: Viacheslav Mitrofanov <v.v.mitrofanov@yadro.com>
Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2022-12-05 12:47:15 -05:00
Heinrich Schuchardt
304bc9f437 sandbox: fix sound driver
In the callback function we have to use memcpy(). Otherwise we add
the new samples on top of what is stored in the stream buffer.

If we don't have enough data, zero out the rest of the stream buffer.

Our sampling frequency is 48000. Let the batch size for the callback
function be 960. If we play a multiple of 20 ms, this will always be
a full batch.

Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2022-12-05 17:43:23 +01:00
Heinrich Schuchardt
3f01307ced doc: man-page for the sound command
Provide a man-page for the sound command.

Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2022-12-05 17:43:21 +01:00
Heinrich Schuchardt
ff414fcc44 cmd: fix long text for sound command
Make it clear that if only 1 parameter is provided this is the duration.

The ISO symbol for hertz is Hz.

Fixes: c0c88533ff ("Sound: Add command for audio playback")
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2022-12-05 17:43:21 +01:00
Heinrich Schuchardt
968eaaeaa7 test: test sandbox sound driver more rigorously
Consider unexpected values for frequency:

* negative frequency
* zero frequency
* frequency exceeding sampling frequency

As in these cases the sum of the samples is zero also check the count of
the samples.

Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2022-12-05 17:43:21 +01:00
Heinrich Schuchardt
d0e8777bee sound: avoid endless loop
'sound play 1 100000' results in an endless loop on the sandbox.

If the frequency exceeds half the sampling rate, zero out the output
buffer.

Fixes: 511ed5fdd3 ("SOUND: SAMSUNG: Add I2S driver")
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2022-12-05 17:43:21 +01:00
Tom Rini
a50622d78c Xilinx changes for v2023.01-rc3-v2
xilinx:
 - Fix MAC address selection for System Controller from FRU
 - Cleanup Kconfig (ZYNQ_MAC_IN_EEPROM symbol)
 
 versal:
 - Create u-boot.elf for mini spi configurations
 
 versal-net:
 - Enable MT35XU flash
 
 zynq:
 - Add missing timer to DT for mini configurations
 
 zynqmp:
 - Do not include psu_init to U-Boot by default
 - Do not enable IPI by default to mini U-Boot
 - Update Luca's fragment
 - Fix SPL_FS_LOAD_PAYLOAD_NAME usage
 
 spi:
 - gqspi: Fix tapdelay values
 - gqspi: Fix 64bit address support
 - cadence: Remove condition for calling enable linear mode
 - nor-core: Invert logic to reflect sst26 flash unlocked
 
 net:
 - Add PCS/PMA phy support
 -----BEGIN PGP SIGNATURE-----
 
 iF0EABECAB0WIQQbPNTMvXmYlBPRwx7KSWXLKUoMIQUCY422rQAKCRDKSWXLKUoM
 ITrXAJ9sVsVNwnjS99ZdNg64zx/Y5mSRlgCdGMho9/PT6BRmOV4IygwOsEGy7I8=
 =XsS5
 -----END PGP SIGNATURE-----

Merge tag 'xilinx-for-v2023.01-rc3-v2' of https://source.denx.de/u-boot/custodians/u-boot-microblaze

Xilinx changes for v2023.01-rc3-v2

xilinx:
- Fix MAC address selection for System Controller from FRU
- Cleanup Kconfig (ZYNQ_MAC_IN_EEPROM symbol)

versal:
- Create u-boot.elf for mini spi configurations

versal-net:
- Enable MT35XU flash

zynq:
- Add missing timer to DT for mini configurations

zynqmp:
- Do not include psu_init to U-Boot by default
- Do not enable IPI by default to mini U-Boot
- Update Luca's fragment
- Fix SPL_FS_LOAD_PAYLOAD_NAME usage

spi:
- gqspi: Fix tapdelay values
- gqspi: Fix 64bit address support
- cadence: Remove condition for calling enable linear mode
- nor-core: Invert logic to reflect sst26 flash unlocked

net:
- Add PCS/PMA phy support
2022-12-05 08:33:19 -05:00
Tom Rini
bdaf047f51 Merge tag 'i2cfixes-for-v2023.01-rc3' of https://source.denx.de/u-boot/custodians/u-boot-i2c
i2c Fixes for v2023.01-rc3

- nuovoton driver:
  rename npcm_i2c -> npcm-i2c from Jim Liu
2022-12-05 08:33:01 -05:00
Algapally Santosh Sagar
7ad3c09e79 mtd: spi-nor-core: Invert logic to reflect sst26 flash unlocked
flash_is_locked is changed to flash_is_unlocked with commit 513c6071ce
("mtd: spi: Convert is_locked callback to is_unlocked"). sst26_is_locked()
is also changed to sst26_is_unlocked() but the logic remained same.
Invert the logic for the flash lock/unlock to work properly.

Signed-off-by: Algapally Santosh Sagar <santoshsagar.algapally@amd.com>
Signed-off-by: Ashok Reddy Soma <ashok.reddy.soma@amd.com>
Reviewed-by: Jan Kiszka <jan.kiszka@siemens.com>
Reviewed-by: Dhruva Gole <d-gole@ti.com>
Link: https://lore.kernel.org/r/20221122051833.13306-1-ashok.reddy.soma@amd.com
Signed-off-by: Michal Simek <michal.simek@amd.com>
2022-12-05 10:01:45 +01:00