Commit graph

27927 commits

Author SHA1 Message Date
Nikita Kiryanov
9fbdcf018e arm: mx6: cm-fx6: increase size of malloc area
Increase size of malloc area to make room for framebuffer
and other such big allocations.

Signed-off-by: Nikita Kiryanov <nikita@compulab.co.il>
Cc: Stefano Babic <sbabic@denx.de>
Cc: Igor Grinberg <grinberg@compulab.co.il>
2015-01-29 17:42:28 +01:00
Nikita Kiryanov
eab29802d6 arm: mx6: cm-fx6: pass 2nd nic mac addr to Linux
Obtain 2nd NIC MAC address from baseboard EEPROM and pass it to Linux.

Signed-off-by: Nikita Kiryanov <nikita@compulab.co.il>
Cc: Stefano Babic <sbabic@denx.de>
Cc: Igor Grinberg <grinberg@compulab.co.il>
Acked-by: Igor Grinberg <grinberg@compulab.co.il>
2015-01-29 17:42:28 +01:00
Nikita Kiryanov
e7a2447ba2 compulab: eeprom: allow reading mac address from multiple eeproms
Implement the option to select the eeprom i2c bus when reading mac
address.

Signed-off-by: Nikita Kiryanov <nikita@compulab.co.il>
Cc: Stefano Babic <sbabic@denx.de>
Cc: Igor Grinberg <grinberg@compulab.co.il>
Cc: Ilya Ledvich <ilya@compulab.co.il>
Cc: Dmitry Lifshitz <lifshitz@compulab.co.il>
Acked-by: Igor Grinberg <grinberg@compulab.co.il>
2015-01-29 17:42:28 +01:00
Nikita Kiryanov
cc67f4a63f arm: mx6: cm-fx6: change dtb node for ethaddr
When passing eth address to Linux via dtb, the "local-mac-address"
property should be set for "/soc/aips-bus@02100000/ethernet@02188000",
not "/fec".

Signed-off-by: Nikita Kiryanov <nikita@compulab.co.il>
Cc: Stefano Babic <sbabic@denx.de>
Cc: Igor Grinberg <grinberg@compulab.co.il>
Acked-by: Igor Grinberg <grinberg@compulab.co.il>
2015-01-29 17:42:27 +01:00
Nikita Kiryanov
508a6edea9 arm: mx6: cm-fx6: expand boot sequence
Expand boot sequence to the following order:
1) mmc boot: mmc boot script, then mmc bootm, then mmc bootz.
2) usb boot: usb boot script.
3) sata boot: sata boot script, sata bootm, sata bootz.
4) nand boot: nand bootm, then nand bootz.

Signed-off-by: Nikita Kiryanov <nikita@compulab.co.il>
Cc: Stefano Babic <sbabic@denx.de>
Cc: Igor Grinberg <grinberg@compulab.co.il>
Acked-by: Igor Grinberg <grinberg@compulab.co.il>
2015-01-29 17:42:27 +01:00
Christian Gmeiner
8af9aff1e5 ot1200: add ot1200_spl_defconfig file
Signed-off-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Acked-by: Stefano Babic <sbabic@denx.de>#
2015-01-22 11:03:19 +01:00
Christian Gmeiner
5324917126 ot1200: add basic SPL support
Currently we only support the Micron MT41K128M16JT-125 ddr3 chip.

Signed-off-by: Christian Gmeiner <christian.gmeiner@gmail.com>
2015-01-22 11:03:19 +01:00
Christian Gmeiner
68a3664aec ot1200: add SPL configuration
We will only support loading u-boot.img from SPI flash stored
at the offset of 64k.

Signed-off-by: Christian Gmeiner <christian.gmeiner@gmail.com>
2015-01-22 11:03:19 +01:00
Christian Gmeiner
e88b83575a ot1200: enable spi clock directly in ccgr_init(..)
Signed-off-by: Christian Gmeiner <christian.gmeiner@gmail.com>
2015-01-22 11:03:19 +01:00
Christian Gmeiner
84c5dd16a4 ot1200: move ccgr and gpr init to c functions
We need this way for SPL boot.

Signed-off-by: Christian Gmeiner <christian.gmeiner@gmail.com>
2015-01-22 11:03:19 +01:00
Christian Gmeiner
f77dd6d7db ot1200: make use of imx_ddr_size(..)
To support different ddr3 memory sizes we should start using
imx_ddr_size(..) instead of the define PHYS_SDRAM_SIZE.

Signed-off-by: Christian Gmeiner <christian.gmeiner@gmail.com>
2015-01-22 11:03:18 +01:00
Christian Gmeiner
8551b3661c ot1200: select SUPPORT_SPL
Signed-off-by: Christian Gmeiner <christian.gmeiner@gmail.com>
2015-01-22 11:03:18 +01:00
Stefano Babic
5ba49e75af mx6: fix warning in platinum board
Fix warning due to missing prototype for writel

Signed-off-by: Stefano Babic <sbabic@denx.de>
Acked-by: Stefan Roese <sr@denx.de>
2015-01-22 10:59:03 +01:00
Ye.Li
0da040bfd4 imx: mx6: Change ENV offset to 512K bytes for larger u-boot image
To align with other mx6 boards, change ENV offset from 384KB to
512KB position to fit a larger u-boot image.

Signed-off-by: Ye.Li <B37916@freescale.com>
2015-01-22 10:15:21 +01:00
Peng Fan
1565d54a76 imx:mx6sxsabresd board spl support
Add board level spl support for mx6sxsabresd board.

Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
2015-01-22 09:56:06 +01:00
Peng Fan
f9e89ffd16 imx:mx6 add mx6sx in imx spl header file
Since mx6sx's memory space is different to mx6dq, redefine the SPL
related macro for mx6sx chip.

Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
2015-01-22 09:55:47 +01:00
Peng Fan
d9efd47c03 imx:mx6sx add dram io configure for mx6sx
Define two structure mx6sx_iomux_ddr_regs and mx6sx_iomux_grp_regs.
Add a new function mx6sx_dram_iocfg to configure dram io.

Since mx6sx only have one channel mmdc0, define a new empty macro MMDC1
to replace mmdc1->entry=value for mx6sx. And to other mx6 soc, MMDC1
effects as "mmdc1->entry=value".

Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
2015-01-22 09:55:47 +01:00
Peng Fan
71abf19b0f imx:mx6sxsabresd spl support in header file
Add SPL support in mx6sxsabresd header file.

Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
2015-01-22 09:55:47 +01:00
Peng Fan
3dae50d0a7 imx:mx6sxsabresd select SUPPORT_SPL
select SUPPORT_SPL for mx6sxsabresd.

Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
2015-01-22 09:55:47 +01:00
Peng Fan
d1a2e91611 imx:mx6sxsabresd add spl config file
Add a SPL default configuration file for mx6sxsabresd board.

Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
2015-01-22 09:55:47 +01:00
Alexandre Coffignal
ca6dc4f81c mxsboot : Support of 224-bytes OOB area length
Add support for the NAND Flash chip with page size of 4096+224-bytes OOB area length

For example Micron MT29F4G08 NAND flash device defines a OOB area which is
224 bytes long (oobsize).

Signed-off-by: Alexandre Coffignal <acoffignal@geral.com>
2015-01-19 09:10:52 +01:00
Stefan Roese
5d6050fdb8 arm: mx6: Add Barco platinum-picon and platinum-titanium
This patch adds the new Barco platinum platform. It currently
includes those two boards:

platinum-titanium
-----------------
This is the same board as the titanium that is already supported in
mainline U-Boot. But its now moved to this new platform to support
multiple "flavors" of imx6 boards in one directory. Its also moved
to support SPL booting. And with this we use the run-time DDR
configuration of this SPL support. The board is equipped with the
Micron MT41J128M16JT-125 DDR chips. We now can remove the DDR
related registers tuples from the imximage.cfg file. As all this
is done in the SPL at run-time.

platinum-picon
--------------
This board is new and based on the MX6DL with 1GiB DDR using the
Micron MT41K256M16HA DDR3 chips. Its also equipped with 2 NAND
chips (each 512MiB).

Signed-off-by: Stefan Roese <sr@denx.de>
Cc: Stefano Babic <sbabic@denx.de>
Cc: Pieter Ronsijn <pieter.ronsijn@barco.com>
2015-01-19 09:07:31 +01:00
Fabio Estevam
834670eae0 mx6sxsabresd: Remove unneeded board_late_init()
Since commit 1f98e31bc0 ("imx: mx6sxsabresd: Use the pfuze common init
function") board_late_init() became empty, so we can safely remove this unneeded
function.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
2015-01-19 09:04:42 +01:00
Otavio Salvador
99c618ff26 wandboard: Use 32bit color depth for Fusion LCD
The Fusion LCD needs the 32bit color depth to properly work; the
default is different on the 3.10.17 kernels and it is better to ensure
it work out of box using proper default color setting.

Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
2015-01-19 09:02:47 +01:00
Tom Rini
ab77f24119 Merge branch 'master' of git://git.denx.de/u-boot-ti 2015-01-16 10:25:01 -05:00
Masahiro Yamada
d928664f41 powerpc: 74xx_7xx: remove 74xx_7xx cpu support
All the 74xx_7xx boards are still non-generic boards:
P3G4, ZUMA, ppmc7xx, ELPPC, mpc7448hpc2

Acked-by: Marek Vasut <marex@denx.de>
Acked-by: Stefan Roese <sr@denx.de>
Acked-by: York Sun <yorksun@freescale.com>
Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Cc: Wolfgang Denk <wd@denx.de>
Cc: Nye Liu <nyet@zumanetworks.com>
Cc: Roy Zang <tie-fei.zang@freescale.com>
2015-01-16 10:24:39 -05:00
Masahiro Yamada
eb8b3f1edd mpc8xx: remove unused linker script
Now TQM8xx is the only remaining board family of mpc8xx.
It uses its own linker script, board/tqc/tqm8xx/u-boot.lds.

arch/powerpc/cpu/mpc8xx/u-boot.lds is not used by any boards.

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Cc: Wolfgang Denk <wd@denx.de>
2015-01-16 10:24:38 -05:00
Masahiro Yamada
9c3c5c8b02 ppc4xx: remove dead code
Since commit 843125daeb (ppc4xx: remove HH405 board), CONFIG_HH405
is not defined.

Since commit d526330479 (ppc4xx: remove PMC405), CONFIG_PMC405
is not defined.

Acked-by: Stefan Roese <sr@denx.de>
Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Cc: Matthias Fuchs <matthias.fuchs@esd.eu>
2015-01-16 10:24:14 -05:00
Tom Rini
d1c3310d40 Merge branch 'buildman' of git://git.denx.de/u-boot-x86 2015-01-15 10:18:05 -05:00
Simon Glass
d2ce658de5 buildman: Add an option to write the full build output
Normally buildman runs with 'make -s' meaning that only errors and warnings
appear in the log file. Add a -V option to run make in verbose mode, and
with V=1, causing a full build log to be created.

Signed-off-by: Simon Glass <sjg@chromium.org>
2015-01-14 21:16:54 -08:00
Simon Glass
827e37b558 buildman: Add the option to download toolchains from kernel.org
The site at https://www.kernel.org/pub/tools/crosstool/ is a convenient
repository of toolchains which can be used for U-Boot. Add a feature to
download and install a toolchain for a selected architecture automatically.

It isn't clear how long this site will stay in the current place and
format, but we should be able to rely on bug reports if it changes.

Suggested-by: Marek Vašut <marex@denx.de>
Suggested-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Simon Glass <sjg@chromium.org>
2015-01-14 21:16:54 -08:00
Simon Glass
9b83bfdcb0 buildman: Allow architecture to alias to multiple toolchains
Some archs have need than one alias, so support a list of alises in the
..buildman file.

Signed-off-by: Simon Glass <sjg@chromium.org>
2015-01-14 21:16:54 -08:00
Simon Glass
cc935295f2 buildman: Don't use the local settings when running tests
We should create a test setting file when running testes, not use whatever
happens to be on the local machine.

Signed-off-by: Simon Glass <sjg@chromium.org>
2015-01-14 21:16:54 -08:00
Simon Glass
7024ab6316 buildman: Don't complain about missing sections in ~/.buildman
Silently ignore this since it is valid to have missing sections.

Signed-off-by: Simon Glass <sjg@chromium.org>
2015-01-14 21:16:54 -08:00
Simon Glass
620053421c buildman: Add documentation about the .buildman file
This file is only partially documented. Add some more details.

Signed-off-by: Simon Glass <sjg@chromium.org>
Suggested-by: Wolfgang Denk <wd@denx.de>
2015-01-14 21:16:53 -08:00
Simon Glass
346996969d buildman: Add a note about Python pre-requisites
Since we need a few modules which might not be available in a bare-bones
distribution, add a note about that to the README.

Signed-off-by: Simon Glass <sjg@chromium.org>
Suggested-by: Wolfgang Denk <wd@denx.de>
2015-01-14 21:16:53 -08:00
Simon Glass
bb1501f2c2 buildman: Add an option to use the full tool chain path
In some cases there may be multiple toolchains with the same name in the
path. Provide an option to use the full path in the CROSS_COMPILE
environment variable.

Note: Wolfgang mentioned that this is dangerous since in some cases there
may be other tools on the path that are needed. So this is set up as an
option, not the default. I will need test confirmation (i.e. that this
commit fixes a real problem) before merging it.

Signed-off-by: Simon Glass <sjg@chromium.org>
Suggested-by: Steve Rae <srae@broadcom.com>
2015-01-14 21:16:53 -08:00
Simon Glass
f210b58734 buildman: Put the toolchain path first instead of last in PATH
If:

1. Toolchains A and B have the same filename
2. Toolchain A is in the PATH
3. Toolchain B is given in ~/.buildman and buildman uses it to build

then buildman will add toolchain B to the end of its path but will not
necessarily use it since U-Boot will find toolchain A first in the PATH.

Try to fix this by putting the toolchain first in the path instead of
last.

Signed-off-by: Simon Glass <sjg@chromium.org>
2015-01-14 21:16:53 -08:00
Simon Glass
b53241230d buildman: Try to avoid hard-coded string parsing
The assumption that the compiler name will always end in gcc is incorrect
for clang and apparently on BSD.

Signed-off-by: Simon Glass <sjg@chromium.org>
2015-01-14 21:16:53 -08:00
Simon Glass
5abab20dfb buildman: Allow specifying a range of commits to build
Adjust the -b flag to permit a range expression as well as a branch.

Signed-off-by: Simon Glass <sjg@chromium.org>
Suggested-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
Tested-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2015-01-14 21:16:53 -08:00
Simon Glass
0740127f4d buildman: Don't remove entire output directory when testing
When running tests the output directory is often wiped. This is only safe if
a branch is being built. The output directory may contain other things
besides the buildman test output.

Signed-off-by: Simon Glass <sjg@chromium.org>
2015-01-14 21:16:52 -08:00
Simon Glass
5971ab5c44 buildman: Add an option to flatten output directory trees
When building current source for a single board, buildman puts the output
in <output_dir>/current/current/<board>. Add an option to make it use
<output_dir>/<board> instead. This removes the unnecessary directories
in that case, controlled by the --no-subdirs/-N option.

Suggested-by: Tom Rini <trini@ti.com>
Signed-off-by: Simon Glass <sjg@chromium.org>
2015-01-14 21:16:52 -08:00
Simon Glass
2a9e2c6a09 buildman: Try to guess the upstream commit
Buildman normally obtains the upstream commit by asking git. Provided that
the branch was created with 'git checkout -b <branch> <some_upstream>' then
this normally works.

When there is no upstream, we can try to guess one, by looking up through
the commits until we find a branch. Add a function to try this and print
a warning if buildman ends up relying on it.

Also update the documentation to match.

Signed-off-by: Simon Glass <sjg@chromium.org>
Suggested-by: Wolfgang Denk <wd@denx.de>
2015-01-14 21:16:52 -08:00
Simon Glass
1a91567510 buildman: Don't prune output space for 'current source' build
This is not needed since we always do a full (non-incremental) build. Also
it might be dangerous since it will try to delete everything below the
base directory.

Fix this potentially nasty bug.

Signed-off-by: Simon Glass <sjg@chromium.org>
2015-01-14 21:16:52 -08:00
Simon Glass
05c96b187a buildman: Put build in 'current', not 'current/current'
Buildman currently puts current-source builds in a current/current
subdirectory, but there is no need for the extra depth.

Suggested-by: Albert Aribaud <albert.u.boot@aribaud.net>
Signed-off-by: Simon Glass <sjg@chromium.org>
2015-01-14 21:16:52 -08:00
Simon Glass
4466c1f943 buildman: Add tests that check the correct output directory is used
Add a few tests of the output directory logic.

Signed-off-by: Simon Glass <sjg@chromium.org>
2015-01-14 21:16:52 -08:00
Tom Rini
28c4dae114 Merge branch 'next' of git://git.denx.de/u-boot-video 2015-01-14 16:26:15 -05:00
Michal Simek
16ae782722 net: Declare physical address as phys_addr_t unsigned type
Use phys_addr_t instead of int for addresses.
Addresses can't be < 0.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2015-01-14 11:37:39 -05:00
Michal Simek
f1075aedd2 ARM: armv8: Fix typo in commentary
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2015-01-14 11:37:39 -05:00
Michal Simek
421044b183 doc: ARM: Use the right function name
Trivial fix.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2015-01-14 11:37:39 -05:00