Commit graph

40519 commits

Author SHA1 Message Date
Priyanka Jain
9ae836cde7 armv8: fsl-layerscape: Add NXP LS2088A SoC support
The QorIQ LS2088A SoC is built on layerscape architecture.

It is similar to LS2080A SoC with some differences like
1)Timer controller offset is different
2)It has A72 cores
3)It supports TZASC module

Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
Reviewed-by: York Sun <york.sun@nxp.com>
2016-11-22 11:37:54 -08:00
Priyanka Jain
d5df606d17 armv8: fsl-layerscape : Check SVR for initializing TZASC
LS2080 SoC and its personalities does not support TZASC
But other new SoCs like LS2088A, LS1088A supports TZASC

Hence, skip initializing TZASC for Ls2080A based on SVR

Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
Reviewed-by: York Sun <york.sun@nxp.com>
2016-11-22 11:37:49 -08:00
Priyanka Jain
7cfbb4abe3 armv8: fsl-layerscape: Update TZASC registers type
TZASC registers like TZASC_GATE_KEEPER, TZASC_REGION_ATTRIBUTES
are 32-bit regsiters.
So while doing register load-store operations, 32-bit intermediate
register, w0 should be used.
Update x0 register to w0 register type.

Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
Reviewed-by: York Sun <york.sun@nxp.com>
2016-11-22 11:37:41 -08:00
Priyanka Jain
f6b96ff665 armv8: lsch3: Use SVR based timer base address detection
Timer controller base address has been changed from
LS2080A SoC (and its personalities) to new SoCs like
LS2088A, LS1088A.

Use SVR based timer base address detection to avoid compile time #ifdef.

Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
Signed-off-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
Reviewed-by: York Sun <york.sun@nxp.com>
2016-11-22 11:37:31 -08:00
Priyanka Jain
f6a70b3a92 armv8: lsch3: Add generic get_svr() in assembly
Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
Reviewed-by: York Sun <york.sun@nxp.com>
2016-11-22 11:37:07 -08:00
Shengzhou Liu
40836e215a armv8/fsl-layerscape: Update CONFIG_LS2080A to CONFIG_FSL_LSCH3
Update CONFIG_LS2080A to CONFIG_FSL_LSCH3 to make those workaround
implementing of erratum reusable for more SoCs.

Signed-off-by: Shengzhou Liu <Shengzhou.Liu@nxp.com>
Reviewed-by: York Sun <york.sun@nxp.com>
2016-11-21 09:20:32 -08:00
Yuan Yao
c3aa1df28d armv8: fsl-layerscape: Add README for deploying QSPI image
Signed-off-by: Yuan Yao <yao.yuan@nxp.com>
[YS: Reviese commit subject]
Reviewed-by: York Sun <york.sun@nxp.com>
2016-11-21 09:20:32 -08:00
Yuan Yao
e2f95e3a6a arm: ls1021a: improve the core frequency to 1.2GHZ
Change core clock to 1.2GHz in the configurations for SD and NAND boot.

Signed-off-by: Yuan Yao <yao.yuan@nxp.com>
Reviewed-by: York Sun <york.sun@nxp.com>
2016-11-21 09:20:32 -08:00
Shaohui Xie
c435a7c8c1 armv8: ls2080aqds: fix SGMII repeater settings
The current value to check whether the PHY was configured has dependency
on MC, it expects MC to start PCS AN, this is not true during boot up,
so it should be changed to remove the dependency.

The PHY's register space should be restore to default after accessing
extended space.

Signed-off-by: Shaohui Xie <Shaohui.Xie@nxp.com>
Reviewed-by: York Sun <york.sun@nxp.com>
2016-11-21 09:20:32 -08:00
Hou Zhiqiang
5eef15ea9d fsl: serdes: fix a deadloop issue for P4080
This deadloop is introduced by commit:
71fe222 fsl: serdes: ensure accessing the initialized maps of serdes protocol

deadloop detail:
cpu_init_r => fsl_serdes_init => p4080_erratum_serdes_a005 =>
is_serdes_configured => fsl_serdes_init

Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com>
Reviewed-by: York Sun <york.sun@nxp.com>
2016-11-21 09:20:32 -08:00
Sriram Dash
4359a3b9e4 powerpc: mpc512x: Add support for get_svr() for mpc512x devices
Defines get_svr() for mpc512x devices

Signed-off-by: Sriram Dash <sriram.dash@nxp.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: York Sun <york.sun@nxp.com>
2016-11-21 09:20:32 -08:00
Priyanka Jain
b7401d0917 driver: net: ldpaa_eth: Fix missing bracket issue
Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
Signed-off-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
Signed-off-by: Ashish Kumar <Ashish.Kumar@nxp.com>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
Reviewed-by: York Sun <york.sun@nxp.com>
2016-11-21 09:20:32 -08:00
Priyanka Jain
fc35addea2 armv8: ls2080a: Update serdes protocol support
Add these serdes protocols
Serdes1: 0x39, 0x4B, 0x4C, 0x4D
Serdes2: 0x47, 0x57

Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
Signed-off-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
Signed-off-by: Ashish Kumar <Ashish.Kumar@nxp.com>
[YS: Revise commit message]
Reviewed-by: York Sun <york.sun@nxp.com>
2016-11-21 09:20:32 -08:00
Shaohui Xie
fdc2b54cb8 armv8: ls1046aqds: add lpuart support
LPUART0 is used by default, and it's using platform clock.

Signed-off-by: Shaohui Xie <Shaohui.Xie@nxp.com>
Reviewed-by: York Sun <york.sun@nxp.com>
2016-11-21 09:20:32 -08:00
Shaohui Xie
9b46213b4f lpuart: add a get_lpuart_clk function
It's not always true that LPUART clock is CONFIG_SYS_CLK_FREQ. This
patch provides a weak function get_lpuart_clk(), so that the clock
can be ovreridden on a specific board which uses different clock
for LPUART.

Signed-off-by: Shaohui Xie <Shaohui.Xie@nxp.com>
[YS: Reformat commit message]
Reviewed-by: York Sun <york.sun@nxp.com>
2016-11-21 09:20:32 -08:00
Feng Li
20c700f8da armv7: Add support of ls1021a-iot board
The patch adds support for Freescale ls1021a-iot board.

Signed-off-by: Feng Li <feng.li_2@nxp.com>
[YS: rewrite commit message, fix whitespace in Kconfig]
Reviewed-by: York Sun <york.sun@nxp.com>
2016-11-21 09:20:32 -08:00
Yuan Yao
21640db51b configs: ls2080ardb: Enable DSPI flash support
There is the stmicro DSPI flash on LS12080ARDB.
Enable DSPI flash related configure options.

Signed-off-by: Yuan Yao <yao.yuan@nxp.com>
Reviewed-by: York Sun <york.sun@nxp.com>
2016-11-21 09:20:32 -08:00
Pratiyush Srivastava
185e586dac armv8:ls1012a: Update bootargs for fast-boot
Add optimization parameters like "quiet" in bootargs to reduce the system
boot time

Signed-off-by: Pratiyush Mohan Srivastava <pratiyush.srivastava@nxp.com>
Signed-off-by: Harninder Rai <harninder.rai@nxp.com>
Reviewed-by: York Sun <york.sun@nxp.com>
2016-11-21 09:20:32 -08:00
Semen Protsenko
693d4c9f1d spl: Remove CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS
This option isn't used for anything, so get rid of it.

Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
2016-11-18 21:20:59 -05:00
Semen Protsenko
38fed8abe7 spl: Convert CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR to Kconfig
Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
[trini: Fix sniper and kc1 migration]
Signed-off-by: Tom Rini <trini@konsulko.com>
2016-11-18 21:20:58 -05:00
Tom Rini
c2cbd164ea Merge branch 'master' of http://git.denx.de/u-boot-mmc 2016-11-17 11:46:56 -05:00
Tom Rini
9e40ea04e9 Patch queue for efi - 2016-11-17
Highlights this time around:
 
   - x86 efi_loader support
   - hello world efi test case
   - network device name is now representative
   - terminal output reports modes correctly
   - fix psci reset for ls1043/ls1046
   - fix efi_add_runtime_mmio definition for x86
   - efi_loader support for ls2080
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iQIcBAABAgAGBQJYLa6qAAoJECszeR4D/txgF+4QAKpHJXY/1V+McEsLga2iwePZ
 lZu5NuuLeDA9IMH+ufOOGxDIoc/llZCTsqw5l8Vnkaz0JEH6v9svyEy4zC1Nqtj2
 r4pOhGLAyVlGAh4O3hFFi/eHNEDyTrMoPO6JCy8ce+fEGE21VBlWed0+/c/KdV7F
 85joTg3X+6htFMkLybzKZS1yiJyoROe7zUZdzPrn4ogwDGbazmYbED+P2u09dDzB
 WjlpIbmEDWJEska6Cbgl/ee6dBXSVl8Q/SY3V77T5TB554sZozrKDsNUehiUMEbh
 ggCT5VzPhsm4gb/7RBpTqqCabBT5ml8iKfB8Y7fwL43sDiMXJ1LgJyVnHuz65sCS
 aPPsPjQujBSiqr+k/571yhgFNLVydrs9IYNumZr+Li4UZCvx3xtCjACJVYkbLUd1
 SZrpKts0V45nZcE4IoiwDKOUxavUbLEef2SJTOAOppB3DG9L3O0TWkyH00hTkaxR
 oDIVNSZPt9wSd4Q7FQ2MYxQ/sk+B6PrN6Gm/NMSfCnvP8DkyTzHo514qrWnEjlhQ
 ndVmyJh3hpipNDfFDeF6r5lLtPkTrzNxOVZcsUGQC5jvrvwLWguD+Kuv9Qq4gSDp
 uDawZmRwDGEGpR/yJhqj8r6/e7bZ0fOE6nPqbWLlyF+Oc4yFTz+D2CNPGR4CR0iF
 DFGQN/lNkYbu+HfyZOFO
 =xmR3
 -----END PGP SIGNATURE-----

Merge tag 'signed-efi-next' of git://github.com/agraf/u-boot

Patch queue for efi - 2016-11-17

Highlights this time around:

  - x86 efi_loader support
  - hello world efi test case
  - network device name is now representative
  - terminal output reports modes correctly
  - fix psci reset for ls1043/ls1046
  - fix efi_add_runtime_mmio definition for x86
  - efi_loader support for ls2080
2016-11-17 11:46:45 -05:00
Alexander Graf
b99ebaf9f0 ls2080ardb: Convert to distro boot
Most new systems in U-Boot these days make use of the generic "distro"
framework which allows a user to have U-Boot scan for a bootable OS
on all available media types.

This patch extends the LS2080ARDB board to use that framework if the
hard coded NOR flash location does not contain a bootable image.

Signed-off-by: Alexander Graf <agraf@suse.de>
2016-11-17 14:18:56 +01:00
Alexander Graf
78d578422a armv8: fsl-layerscape: Add support for efi_loader RTS reset
When implementing efi loader support, we can expose runtime services
for payloads. One such service is CPU reset.

This patch implements RTS CPU reset support for layerscape systems.

Signed-off-by: Alexander Graf <agraf@suse.de>
Reviewed-by: York Sun <york.sun@nxp.com>
2016-11-17 14:18:56 +01:00
Alexander Graf
5a37a2f014 armv8: ls2080a: Declare spin tables as reserved for efi loader
The efi loader code has its own memory map, so it needs to be aware where
the spin tables are located, to ensure that no code writes into those
regions.

Signed-off-by: Alexander Graf <agraf@suse.de>
2016-11-17 14:18:56 +01:00
Alexander Graf
215b1fb9fa ls2080ardb: Reserve DP-DDR RAM
The DP-DDR shouldn't be exposed as conventional memory to an OS, so let's
rather claim it's a reserved region in the EFI memory map

Signed-off-by: Alexander Graf <agraf@suse.de>
Reviewed-by: York Sun <york.sun@nxp.com>
2016-11-17 14:18:55 +01:00
Alexander Graf
b7b8410a8f ls2080: Exit dpaa only right before exiting U-Boot
On ls2080 we have a separate network fabric component which we need to
shut down before we enter Linux (or any other OS). Along with that also
comes configuration of the fabric using a description file.

Today we always stop and configure the fabric in the boot script and
(again) exit it on device tree generation. This works ok for the normal
booti case, but with bootefi the payload we're running may still want to
access the network.

So let's add a new fsl_mc command that defers configuration and stopping
the hardware to when we actually exit U-Boot, so that we can still use
the fabric from an EFI payload.

For existing boot scripts, nothing should change with this patch.

Signed-off-by: Alexander Graf <agraf@suse.de>
Reviewed-by: York Sun <york.sun@nxp.com>
[agraf: Fix x86 build]
2016-11-17 14:18:55 +01:00
Alexander Graf
97d014446c efi_loader: Fix efi_add_runtime_mmio definition
The efi_add_runtime_mmio prototype for disabled CONFIG_EFI_LOADER
was different from the enabled one. Sync them.

Signed-off-by: Alexander Graf <agraf@suse.de>
2016-11-17 14:18:55 +01:00
Alexander Graf
441a2306ab efi_loader: Disable PSCI reset for ls1043 and ls1046
The NXP ls1043 and ls1046 systems do not (yet) have PSCI enablement
for reset. Don't enable generic PSCI reset code on them.

Signed-off-by: Alexander Graf <agraf@suse.de>
2016-11-17 14:18:50 +01:00
Alexander Graf
69bd459d34 efi_loader: AArch64: Run EFI payloads in EL2 if U-Boot runs in EL3
Some boards decided not to run ATF or other secure firmware in EL3, so
they instead run U-Boot there. The uEFI spec doesn't know what EL3 is
though - it only knows about EL2 and EL1. So if we see that we're running
in EL3, let's get into EL2 to make payloads happy.

Signed-off-by: Alexander Graf <agraf@suse.de>
Reviewed-by: York Sun <york.sun@nxp.com>
2016-11-17 11:52:21 +01:00
Maxime Ripard
91f839d2d3 sunxi: sina33: Enable the LCD
The SinA33 comes with an optional 7" display. Enable it in the
configuration.

Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
2016-11-16 13:30:18 +09:00
Maxime Ripard
53c37f625d sunxi: sina33: Enable the eMMC
The SinA33 has an 4GB Toshiba eMMC connected to the MMC2 controller.
Enable it.

Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Reviewed-by: Chen-Yu Tsai <wens@csie.org>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
2016-11-16 13:30:17 +09:00
Maxime Ripard
fb01318467 mmc: sunxi: Enable 8bits bus width for sun8i
The sun8i SoCs also have a 8 bits capable MMC2 controller. Enable the
support for those too.

Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Reviewed-by: Chen-Yu Tsai <wens@csie.org>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
2016-11-16 13:30:17 +09:00
Maxime Ripard
a9003dc641 mmc: Retry the switch command
Some eMMC will fail at the first switch, but would succeed in a subsequent
one.

Make sure we try several times to cover those cases. The number of retries
(and the behaviour) is currently what is being used in Linux.

Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
2016-11-16 13:30:17 +09:00
Bharat Kumar Gogada
688d1be5ba ARM64: zynqmp: Adding prefetchable memory space to pcie
Adding prefetchable memory space to pcie device tree node.
Shifting configuration space to 64-bit address space.
Removing pcie device tree node from amba as it requires size-cells=<2>
in order to access 64-bit address space.

Signed-off-by: Bharat Kumar Gogada <bharatku@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-11-15 15:30:41 +01:00
Kedareswara rao Appana
d33046aa2a ARM64: zynqmp: Add clocks for LPDDMA
Zynqmp DMA driver expects two clocks (main clock and apb clock)
For LPDDMA channels the two clocks are missing in the
Dma node resulting probe failure.

xilinx-zynqmp-dma ffa80000.dma: main clock not found.
xilinx-zynqmp-dma ffa80000.dma: Probing channel failed
xilinx-zynqmp-dma: probe of ffa80000.dma failed with error -2

This patch fixes this issue.

Signed-off-by: Kedareswara rao Appana <appanad@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-11-15 15:30:40 +01:00
Kedareswara rao Appana
6af5773700 ARM64: zynqmp: Add description for LPDDMA channel usage
LPDDMA default allows only secured access.
inorder to enable these dma channels,
one should ensure that it allows non secure access.
This patch updates the same.

Reported-by: Sai Pavan Boddu <saipava@xilinx.com>
Signed-off-by: Kedareswara rao Appana <appanad@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-11-15 15:30:40 +01:00
Michal Simek
b976fd636e ARM64: zynqmp: Use 64bit size cell format for main amba bus
Use 64bit size cell for main amba bus instead of 32bit because PCIe
node requires it Change 64bit sizes also for all others IPs.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-11-15 15:30:40 +01:00
Naga Sureshkumar Relli
5534480a65 ARM64: zynqmp: Add ocm node in dtsi
This patch adds ocm controller node in zynqmp.dtsi.
needed for OCM edac support.

Signed-off-by: Naga Sureshkumar Relli <nagasure@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-11-15 15:30:40 +01:00
Anurag Kumar Vulisha
db6c62e1b9 ARM64: zynqmp: Add device tree properties for ZynqMP GT core
This patch adds the ZynqMP GT core device-tree properties for
zynqmp.dtsi file.

Signed-off-by: Anurag Kumar Vulisha <anuragku@xilinx.com>
Tested-by: Hyun Kwon <hyunk@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-11-15 15:30:40 +01:00
Michal Simek
571f531796 Revert "ARM64: zynqmp: Added broken-tuning property to SD, eMMC nodes"
This reverts commit bd750e7a6c

Implemented the new workaround for auto tuning based on
zynqmp compatible string, so removed the 'broken-tuning'
property.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-11-15 15:30:40 +01:00
Sai Krishna Potthuri
0488a5e117 ARM64: zynqmp: change sdhci compatible string.
This patch changes the compatible string for sdhci node,
adds "xlnx,device_id" and "xlnx,mio_bank" property to sdhci node.

Signed-off-by: Sai Krishna Potthuri <lakshmis@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-11-15 15:30:40 +01:00
Michal Simek
ba6ad317d0 ARM64: zynqmp: List all SMMU ids
Add SMMU description for all tested IPs.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-11-15 15:30:40 +01:00
Nava kishore Manne
d64e43f1d4 ARM64: zynqmp: Add support for zynqmp fpga manager
Add support for zynqmp fpga manager.

Signed-off-by: Nava kishore Manne <navam@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-11-15 15:30:40 +01:00
Naga Sureshkumar Relli
aaf232f348 ARM64: zynqmp: Add cortexa53 edac node
This patch adds edac node for arm cortexa53 to report
errors on L1 and L2 caches.

Signed-off-by: Naga Sureshkumar Relli <nagasure@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-11-15 15:30:39 +01:00
Michal Simek
7418b7c6ea Revert "ARM64: zynqmp: Add serdes address space dp driver"
This reverts commit 786db82bd5.

Since we are using serdes driver , no need of mapping serdes register
space into DP driver.

Signed-off-by: Anurag Kumar Vulisha <anuragku@xilinx.com>
Tested-by: Hyun Kwon <hyunk@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-11-15 15:30:39 +01:00
Hyun Kwon
bfe279803f ARM64: zynqmp: drm: Add DMA index
Each plane can be associated with multiple DMA channels. So add
index for each DMA channel.

Signed-off-by: Hyun Kwon <hyun.kwon@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-11-15 15:30:39 +01:00
Michal Simek
9e826b6868 ARM64: zynqmp: Sync gpio node properties
Keep dtsi in sync with mainline kernel.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-11-15 15:30:39 +01:00
Michal Simek
c0f277f306 ARM64: zynqmp: Remove xlnx,id property
Remove unused xlnx,id property because it is not the part of
DT binding.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-11-15 15:30:39 +01:00
Bharat Kumar Gogada
7d6ca73ab9 ARM64: zynqmp: pci: Updating device tree as per upstream
Updating required device tree changes as per mainlined driver
from 4.6 kernel.

Signed-off-by: Bharat Kumar Gogada <bharatku@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-11-15 15:30:39 +01:00