Commit graph

46 commits

Author SHA1 Message Date
Michal Simek
3195840c94 arm64: zynqmp: Add psgtr DT descriptions
Mainline kernel has psgtr driver that's why it is good to add description
to DT files. Some boards are just missing description for USB3 and sata.
zc1751-dc1 and p-a2197 are also missing clock descriptions for input
clocks.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2021-05-19 09:44:50 +02:00
Michal Simek
bd00849ae9 arm64: zynqmp: Add pinctrl description
ZynqMP pinctrl Linux driver has been merged to 5.13-rc1 kernel. Based on it
DT files can be extended by pinctrl configurations.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2021-05-19 09:44:50 +02:00
Michal Simek
ce90654d1c xilinx: Sync DTs with Linux kernel
There are several changes which happen in mainline kernel which should get
also to U-Boot. Here is the list of patches from the kernel:

- ARM: zynq: Fix leds subnode name for zc702/zybo-z7
- arm64: dts: zynqmp: Fix leds subnode name for zcu100/ultra96 v1
- arm64: dts: zynqmp: Fix u48 si5382 chip on zcu111
- arm64: dts: zynqmp: Wire up the DisplayPort subsystem
- arm64: dts: zynqmp: Add DisplayPort subsystem
- arm64: dts: zynqmp: Add DPDMA node
- arm64: dts: zynqmp: Enable phy driver for Sata on zcu102/zcu104/zcu106
- arm64: dts: zynqmp: Enable si5341 driver for zcu102/106/111
- arm64: dts: zynqmp: Add DT description for si5328 for zcu102/zcu106
- arm64: dts: zynqmp-zcu100-revC: correct interrupt flags
- arm64: dts: xilinx: align GPIO hog names with dtschema
- arm64: zynqmp: Add Xilinx AES node
- dt: bindings: dma: xilinx: dpdma: DT bindings for Xilinx DPDMA

but also some other changes have been done.
- Using only one compatible string for adxl345 on zturn
- Remove Xilinx internal DP bindings
- Remove USB3.0 serdes configurations
- Remove SATA serdes configuration for zc1232
- Resort nvmem_firmware
- Update nand compatible string
- Aling power-domains property for sd0/1

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2021-03-30 12:03:24 +02:00
Michal Simek
01a6da1661 xilinx: Fix xlnx,mio_bank property
s/xlnx,mio_bank/xlnx,mio-bank/g

DT binding is describing mio-bank not mio_bank that's why fix all DTSes and
also driver itself.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Acked-by: Peng Fan <peng.fan@nxp.com>
2020-08-20 09:49:20 +02:00
Michal Simek
5df63a60aa arm64: zynqmp: Fix addresses in partition definitions
Node name should be <name>@<address> which is not how partitions are
described.

Issue was found by running dtbs_check as:
flash@0: 'partition@qspi-device-tree', 'partition@qspi-fsbl-uboot',
'partition@qspi-linux', 'partition@qspi-rootfs'
do not match any of the regexes: ...

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-04-06 12:51:31 +02:00
Michal Simek
04437dea7c arm64: zynqmp: Sync DP subsystem
Sync DP subsystem with the latest state in Xilinx U-Boot repository.
This binding hasn't been approved in mainline Linux but it is much better
than ancient version which this patch removes.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-04-06 12:51:31 +02:00
Manish Narani
12ffe75819 arm64: zynqmp: Add 'no-1-8-v' property for ZynqMP Boards
Modify dts files to add 'no-1-8-v' property for all the ZynqMP boards.
User can remove this property to enable the UHS mode. This is to keep
the same speed (HS) modes across all the stages of the Linux Boot. Due
to power cycling limitation of some of the ZynqMP boards, some SD cards
don't get power cycled and are failing in Linux.

Signed-off-by: Manish Narani <manish.narani@xilinx.com>
2020-04-06 12:51:31 +02:00
Michal Simek
d31f1c9236 arm64: zynqmp: Update Copyright years to 2020
Trivial change.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-04-06 12:51:31 +02:00
Sudeep Holla
ad967af6bd arm64: dts: zynqmp: replace gpio-key,wakeup with wakeup-source property
Most of the legacy "gpio-key,wakeup" boolean property is already
replaced with "wakeup-source". However few occurrences of old property
has popped up again, probably from the remnants in downstream trees.

This patch replaces the legacy properties with the unified
"wakeup-source" property introduced by:
"Input: gpio_keys - switch to using generic device properties"
(sha1: 700a38b27eefc582099fdf69effacfad0ad738a4)

Cc: Michal Simek <michal.simek@xilinx.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-01-14 09:05:56 +01:00
Michal Simek
096d7f5b3e arm64: dts: zynqmp: Fix node names which contain "_"
s/_/-/ for node names.

It fixes warnings like this:
... Warning (node_name_chars_strict): /cpu_opp_table:
Character '_' not recommended in node name ...

Issues reported by make dtbs W=12

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-01-14 09:05:55 +01:00
Michal Simek
db2d622cb2 arm64: zynqmp: Turn comment to gpio-line-names
Label gpio lines properly.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-24 13:37:02 +02:00
Michal Simek
003170e74d arm64: zynqmp: Add label property to all ina226 on zcu102
Label property is adding capability to distiguish chips from each other
when iio framework is used.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-24 13:37:02 +02:00
Michal Simek
faddcbe7d7 arm64: zynqmp: Enable iio-hwmon for ina226 on zcu102
ina226 hwmon driver is deprecated and it is recommended to use new iio
based driver. The patch is enabling iio-hwmon driver to export
functionality from IIO to hwmon interface to be able to use lm-sensors
package.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-24 13:37:02 +02:00
Harini Katakam
26b2c68b61 arm64: zynqmp: dt: Add optional gpio phy reset properties
Add gpio phy reset via I2C expander TCA6416 on board ZCU102.
A warning call trace is observer in probe when this reset is called
from context that can sleep. Keep this commented until that is
resolved in phylib.

Signed-off-by: Harini Katakam <harini.katakam@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-24 13:37:02 +02:00
Harini Katakam
631d9a9981 arm64: zynqmp: dt: Add missing DP83867 quirk
The DP83867 strap control workaround is already present in Linux kernel
mainline binding. All these Xilinx boards require this quirk.

Signed-off-by: Harini Katakam <harini.katakam@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-24 13:37:02 +02:00
Michal Simek
2975a42b42 arm64: zynqmp: Use ethernet-phy as node name for ethernet phys
Ethernet phys based on devicetree specification should be using
ethernet-phy@ node name instead of pure phy@.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-24 13:37:01 +02:00
Neil Armstrong
ffd4c7c2ec dts: switch spi-flash to jedec, spi-nor compatible
There is no reason not to use the Linux "jedec,spi-nor" binding in U-Boot
dts files. This compatible has been added in sf_probe, let use it.

This patch switches to jedec,spi-nor when spi-flash is used in the DTS
and DTSI files, and removed spi-flash when jedec,spi-nor is already
present.

The x86 dts are switched in a separate commit since it depends on a change
in fdtdec.

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Acked-by: Stefan Roese <sr@denx.de>
Reviewed-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
Reviewed-by: Evgeniy Paltsev <paltsev@synopsys.com>
Reviewed-by: Rick Chen <rick@andestech.com>
Reviewed-by: Patrick Delaunay <Patrick.delaunay@st.com>
Reviewed-by: Jagan Teki <jagan@openedev.com>
2019-04-12 10:54:27 +05:30
Shubhrajyoti Datta
ccc8a11935 arm64: zynqmp: Fix i2c boot warning
Fix the below warning as the core looks for the compatible
string.

[    5.198919] i2c i2c-18: of_i2c: modalias failure on
/amba/i2c@ff030000/i2c-mux@75/i2c@3/dev@19
[    5.207454] i2c i2c-18: Failed to create I2C device for
/amba/i2c@ff030000/i2c-mux@75/i2c@3/dev@19
[    5.216394] i2c i2c-18: of_i2c: modalias failure on
/amba/i2c@ff030000/i2c-mux@75/i2c@3/dev@30
[    5.224986] i2c i2c-18: Failed to create I2C device for
/amba/i2c@ff030000/i2c-mux@75/i2c@3/dev@30
[    5.233927] i2c i2c-18: of_i2c: modalias failure on
/amba/i2c@ff030000/i2c-mux@75/i2c@3/dev@35
[    5.242527] i2c i2c-18: Failed to create I2C device for
/amba/i2c@ff030000/i2c-mux@75/i2c@3/dev@35
[    5.263880] i2c i2c-18: of_i2c: modalias failure on
/amba/i2c@ff030000/i2c-mux@75/i2c@3/dev@36
[    5.272477] i2c i2c-18: Failed to create I2C device for
/amba/i2c@ff030000/i2c-mux@75/i2c@3/dev@36
[    5.281415] i2c i2c-18: of_i2c: modalias failure on
/amba/i2c@ff030000/i2c-mux@75/i2c@3/dev@51
[    5.290008] i2c i2c-18: Failed to create I2C device for
/amba/i2c@ff030000/i2c-mux@75/i2c@3/dev@51

Signed-off-by: Shubhrajyoti Datta <shubhrajyoti.datta@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-02-15 15:04:01 +01:00
Michal Simek
91af22bc6b xilinx: dts: Remove additional empty lines
Trivial fix.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-02-15 15:04:01 +01:00
Michal Simek
8bdad43333 arm64: zynqmp: Switch all platforms to DM_I2C
CONFIG_PCA953X is not needed because of PCA953X is integrated in gpio
subsystem already. That's why also remove CMD_PCA953X which is only for
this driver.

zcu102/zcu104-revC/zcu106/zcu111 contain links to eeprom which stores MAC address.

DM_I2C is not enabled for the whole SoC because it increase size for
mini configurations and there is no I2C symbol present to setup
dependencies.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Heiko Schocher <hs@denx.de>
2019-02-14 14:31:10 +01:00
Michal Simek
6bd13ee94e arm64: zynqmp: Setup clock-output-names for si570 chips
If there are more instances of si570 clock-output-names property
should be used for differentiation of clock output.
The patch is adding this optional properties for all zynqmp boards with
si570 chip.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-11-29 10:30:02 +01:00
Siva Durga Prasad Paladugu
76338e2a0c zynqmp: zcu102: Add qspi driver support for ZynqMP zcu102 boards
This patch adds qspi driver support for all ZynqMP ZCU102
boards.

Signed-off-by: Siva Durga Prasad Paladugu <siva.durga.paladugu@xilinx.com>
Acked-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Jagan Teki <jagan@openedev.com>
2018-07-16 14:03:10 +05:30
Michal Simek
3c1eaec012 arm: zynq: Drop #address-cells and #size-cells from gpio-keys
dtc is showing some warnings and this change was also done in
the Linux kernel as "Input: gpio-keys - clean up device tree binding
example"
with this fragment in commit message
"Drop #address-cells and #size-cells, which are not required by the
gpio-keys binding documentation, as button sub-nodes are not devices."

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-06-15 08:06:31 +02:00
Michal Simek
704744f81b arm64: zynqmp: Remove pinctrl settings
This part hasn't been pushed to mainline yet that's why remove it.
The patch can be reverted in future when this is pushed there.

Reported-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Alexander Graf <agraf@suse.de>
2018-04-09 12:14:52 +02:00
Michal Simek
bbe5c7252d arm64: zynqmp: Add silabs prefix to u69 for zcu102
Add vendor prefix to si5341.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-04-09 12:14:49 +02:00
Michal Simek
147ae1f210 arm64: zynqmp: Remove number from clock-generator node name
There shouldn't be a number appended based on spec.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-04-09 12:14:49 +02:00
Michal Simek
95f7d6419d arm64: zynqmp: Remove u-boot commands from dts files
U-Boot commands shouldn't be the part of kernel DTS files.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-04-09 12:14:48 +02:00
Michal Simek
098505f500 arm64: zynqmp: Use atmel prefix instead of at
This changes was done in mainline and this patch is just following it.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-04-09 12:14:48 +02:00
Michal Simek
9d928f0418 arm64: zynqmp: Use keycode from input/input.h
Instead of hardcoding numbers.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-04-09 12:14:48 +02:00
Michal Simek
52af7e3e81 arm64: zynqmp: Remove additional comments from dts files
Remove additional comments which were removed as the part of upstreaming.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-04-09 12:14:48 +02:00
Michal Simek
18a952ce7f arm64: zynqmp: Sync up license with mainline kernel
Mainline Linux kernel has adopted SPDX header license in a different
format then was used before. This patch is syncing it up.

Also update years in License text and remove Nathalie's email because it
is no longer valid.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-04-09 12:14:47 +02:00
Michal Simek
ba7b6dfae1 arm64: zynqmp: Use i2c-mux instead of i2cswitch instead
Based on review from mainline i2c-mux is standard name for i2c switches.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-04-09 12:14:47 +02:00
Michal Simek
a16e578639 arm64: zynqmp: Use maxim prefix for all maxim chips
Use vendor prefix for Maxim chips.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-04-09 12:14:47 +02:00
Michal Simek
ee4983f73a arm64: zynqmp: Convert board to use zynqmp-clk driver
Use zynqmp clock driver instead of fixed clocks.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-03-23 09:30:44 +01:00
Michal Simek
858a508f49 arm64: zynqmp: Remove undocumented dma properties
Remove overfetch, ratectrl, include-sg and src-issue dma properties.
Driver is not using them and they are also not documented in the binding
doc.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Acked-by: Kedareswara rao Appana <appanad@xilinx.com>
2017-12-14 20:08:33 +01:00
Michal Simek
d70cb51830 arm64: zynqmp: Enable phys for zcu102
Enable USB3.0 and SATA phy for zcu102 boards.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2017-12-14 20:08:22 +01:00
Shubhrajyoti Datta
fe16aa4b02 arm64: zynqmp: Enable watchdog by default
Enable watchdog in dts for zcu102.

Signed-off-by: Shubhrajyoti Datta <shubhrajyoti.datta@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2017-11-28 16:09:17 +01:00
Michal Simek
b10255f8e0 arm64: zynqmp: Add note about si5328 interrupt
Add comment about irq present on the board connected to PL.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2017-11-28 16:09:16 +01:00
Michal Simek
795ebc0e64 arm64: zynqmp: dt: Add AMS node
The AMS includes an ADC as well as on-chip sensors that can be used to
sample external voltages and monitor on-die operating conditions, such as
temperature and supply voltage levels.

Signed-off-by: Rajnikant Bhojani <rajnikant.bhojani@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2017-11-28 16:09:15 +01:00
Michal Simek
ae9775f822 arm64: zynqmp: Add support for zcu102 1.0 rev
1.0 rev is the latest rev. Describe information in eeprom.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2017-11-28 16:09:11 +01:00
Michal Simek
9c77cb73c7 arm64: zynqmp: Update device tree for pinmux
Added pin control support in device tree for zynqmp.

Signed-off-by: Chirag Parekh <chirag.parekh@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2017-11-28 16:09:10 +01:00
Michal Simek
6507be7800 arm64: zynqmp: Remove local-mac-address from dtsi file
Generic dtsi file can't use the same mac address for all.
U-Boot read mac from eeprom in zcu102 case and for others random mac
address is generated.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2017-11-28 16:09:09 +01:00
Bharat Kumar Gogada
f811eca9db arm64: zynqmp: zcu102: Modifying GTR lane-0 to PCIe
- Enabling GTR lane-0 to PCIe
- Enabling PCIe node in device tree

Signed-off-by: Bharat Kumar Gogada <bharatku@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2017-11-28 16:09:09 +01:00
Chirag Parekh
d801ce553e arm64: zynqmp: Update device tree for gpio
Used defines rather than raw values for gpio configurations.

Signed-off-by: Chirag Parekh <chirag.parekh@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2017-11-28 16:09:09 +01:00
Michal Simek
23b34d1456 arm64: zynqmp: Use revision in dts file description
Trivial change.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2017-11-28 16:09:09 +01:00
Michal Simek
be4634511a arm64: zynqmp: Move dts zcu102 to zcu102-revA
Not using board revision is causing confusion about which board is
supported and tested. Mark dts files exactly with board revision which
was tested. When new board revision arives it can be symlink if SW view
is the same. Also add -revX suffix to compatible string because user space
tools are parsing this string and can change behavior depends of board
revision.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2017-08-02 09:11:52 +02:00
Renamed from arch/arm/dts/zynqmp-zcu102.dts (Browse further)