Commit graph

338 commits

Author SHA1 Message Date
Bin Meng
e25080664a clk: Remove DM_FLAG_PRE_RELOC flag in various drivers
When a driver declares DM_FLAG_PRE_RELOC flag, it wishes to be
bound before relocation. However due to a bug in the DM core,
the flag only takes effect when devices are statically declared
via U_BOOT_DEVICE(). This bug has been fixed recently by commit
"dm: core: Respect drivers with the DM_FLAG_PRE_RELOC flag in
lists_bind_fdt()", but with the fix, it has a side effect that
all existing drivers that declared DM_FLAG_PRE_RELOC flag will
be bound before relocation now. This may expose potential boot
failure on some boards due to insufficient memory during the
pre-relocation stage.

To mitigate this potential impact, the following changes are
implemented:

- Remove DM_FLAG_PRE_RELOC flag in the driver, if the driver
  only supports configuration from device tree (OF_CONTROL)
- Keep DM_FLAG_PRE_RELOC flag in the driver only if the device
  is statically declared via U_BOOT_DEVICE()
- Surround DM_FLAG_PRE_RELOC flag with OF_CONTROL check, for
  drivers that support both statically declared devices and
  configuration from device tree

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2018-11-14 09:16:28 -08:00
Cédric Le Goater
1e5d8aaf4f aspeed: ast2500: fix D2-PLL clock setting in RGMII mode
The algorithm in the ast2500_calc_clock_config() routine suffers from
integer rounding and the requested rate does not get the appropriate
set of Numerator, Denumerator, Post Divider parameters.

This is the case for the D2-PLL clock used by the MAC controllers in
RGMII mode. The requested rated is 250MHz but a 251MHz is assigned.

The easiest way to fix this problem is to introduce an array of clock
settings defining the N, M, P parameters for well known frequencies
used by the Aspeed SoC.

Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2018-11-05 10:41:58 -06:00
Cédric Le Goater
64ae823417 aspeed: ast2500: fix missing break in D2PLL clock enablement
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Reviewed-by: Simon Glass <sjg@chromium.org>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2018-11-05 10:41:57 -06:00
Patrick Delaunay
22929e1266 drivers: cosmetic: Convert SPDX license tags to Linux Kernel style
Complete in the drivers directory the work started with
commit 83d290c56f ("SPDX: Convert all of our single
license tags to Linux Kernel style").

Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2018-10-28 09:26:39 -04:00
Peng Fan
f77d441091 clk: imx: add clk driver for i.MX8QXP
Add clk driver for i.MX8QXP. This basic version supports clk
enable/disable/get_rate/set_rate operations for I2C, ENET,
SDHC0 and UART clocks.

Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Anatolij Gustschin <agust@denx.de>
Cc: Stefano Babic <sbabic@denx.de>
2018-10-22 12:59:01 +02:00
Liviu Dudau
a71e907c4d clk: Add support for Arm's Versatile Express OSC clock generators
The Arm Versatile Express and Juno development boards contain an
OSC clock generator that can be accessed through the Versatile
Express config bus. The generators are quite often being controlled
by some MCU and the config bus offers a uniform way of exposing them.

Signed-off-by: Liviu Dudau <liviu.dudau@foss.arm.com>
Reviewed-by: Heiko Schocher <hs@denx.de>
2018-09-30 13:00:34 -04:00
Tom Rini
333279af23 Merge git://git.denx.de/u-boot-marvell
- Multiples updates to the turris boards / platform
- Changes / enhancements to the Marvell PHY drivers, mainly
  to support the turris platform
- Many fixes and enhancements to the pxa3xx NAND driver
- Fixes for the UART boot mode in kwboot
- Misc minor changes to other 32bit and 64bit boards
2018-09-19 20:35:05 -04:00
Marek Behún
de75fb09a1 clk: armada-37xx-periph: Support changing clock parent and rate
Add support for changing clock rate and parent clock for Armada 37xx
peripheral clocks.

Only clocks which can be disabled (.can_gate is true) can have parent
or rate changed.

This is needed so that Turris Mox can change SPI clock in device tree.

Signed-off-by: Marek Behun <marek.behun@nic.cz>
Signed-off-by: Stefan Roese <sr@denx.de>
2018-09-19 08:59:26 +02:00
Mario Six
07d538d281 clk: Add MPC83xx clock driver
Add a clock driver for the MPC83xx architecture.

Signed-off-by: Mario Six <mario.six@gdsys.cc>
2018-09-18 00:01:18 -06:00
Andreas Dannenberg
e585bef17f clk: Introduce TI System Control Interface (TI SCI) clock driver
Some TI Keystone 2 and K3 family of SoCs contain a system controller
(like the Power Management Micro Controller (PMMC) on 66AK2G SoCs and
the Device Management and Security Controller on AM65x SoCs) that manage
the low-level device control (like clocks, resets etc) for the various
hardware modules present on the SoC. These device control operations are
provided to the host processor OS through a communication protocol
called the TI System Control Interface (TI SCI) protocol.

This patch adds a clock driver that communicates to the system
controller over the TI SCI protocol for performing clock management of
various devices present on the SoC. Various clock functionality is
achieved by the means of different TI SCI device operations provided by
the TI SCI framework.

This code is loosely based on the drivers/clk/keystone/sci-clk.c driver
of the Linux kernel.

Reviewed-by: Tom Rini <trini@konsulko.com>
Signed-off-by: Andreas Dannenberg <dannenberg@ti.com>
Signed-off-by: Vignesh R <vigneshr@ti.com>
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2018-09-11 08:32:55 -04:00
Neil Armstrong
c8e570167f clk: clk_meson: Add mux and div support for reparent and rate setting
This patch adds support for :
- Rate calculation through muxes and generic dividers
- Basic gate setting propagation
- Reparenting for muxes
- Clock rate setting through generic dividers without reparenting

Support is only added to the Composite VPU and VAPB clocks in order
to support the Video Processing Unit Power Domain clock setup.

Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2018-09-10 20:48:17 -04:00
Tom Rini
b71d9e8b38 Merge branch 'master' of git://git.denx.de/u-boot-sunxi 2018-08-20 13:41:56 -04:00
Tom Rini
719afeb0b3 Merge branch 'master' of git://git.denx.de/u-boot-socfpga 2018-08-17 07:24:34 -04:00
Marek Vasut
f9f016adcd clk: socfpga: Add initial Arria10 clock driver
Add clock driver for the Arria10, which allows reading the clock
frequency from all the clock described in the DT. The driver also
allows enabling and disabling the clock. Reconfiguring frequency
is not supported thus far.

Since the DT bindings for the SoCFPGA clock are massively misdesigned
and the handoff DT adds additional incorrectly described entries to
the DT, the driver contains workarounds which attempt to rectify all
of those problems.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Chin Liang See <chin.liang.see@intel.com>
Cc: Dinh Nguyen <dinguyen@kernel.org>
Cc: Ley Foon Tan <ley.foon.tan@intel.com>
2018-08-13 22:35:42 +02:00
Eugen Hristev
e9cd3d7024 clk: at91: utmi: add timeout for utmi lock
In case the slow clock is not properly configured, the UTMI clock
cannot lock the PLL, because UPLLCOUNT will "wait X slow clock cycles".
In this case U-boot will loop indefinitely.
Added a timeout in this case, to start U-boot even if UTMI clock is
not enabled, so the user can use different media if needed, or investigate.

Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
2018-08-13 14:03:57 -04:00
Jagan Teki
cf68225742 clk: Kconfig: Ascending order to sub directiory kconfigs
sourcing of sub directiory kconfig files are not in
proper order, so keep them in ascending order.

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Reviewed-by: Joe Hershberger <joe.hershberger@ni.com>
2018-08-10 11:42:35 +05:30
Neil Armstrong
d64caaf77d clk: clk_set_default: accept no-op skip fields
The Assigned Clock parents and rates misses the fact that a "0" entry can
be passed to skip setting a parent or rate of an assigned clock as
described in the Linux clock bindings at [1].

This patch simply skips the clock reparenting if the DT parsing returns
-ENOENT and the clock rate setting if "0" is passed as clock rate.

[1] https://github.com/torvalds/linux/blob/master/Documentation/devicetree/bindings/clock/clock-bindings.txt#L135

Fixes: f4fcba5c5b "clk: implement clk_set_defaults()"
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2018-08-04 14:50:10 -04:00
Fabrice Gasnier
1fe243a1e4 clk: add clk_valid()
Add clk_valid() to check for optional clocks are valid.
Call clk_valid() in test/dm/clk.c and add relevant test routine to
sandbox clk tests.

Signed-off-by: Fabrice Gasnier <fabrice.gasnier@st.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2018-08-03 19:53:10 -04:00
Patrick Delaunay
d219415544 stm32mp1: clk: support digital bypass
HSE and LSE bypass shall support both analog and digital signals.
This patch add a way to select digital bypas case in the device tree
and set the associated bit DIGBYP in RCC_BDCR and RCC_OCEN register
during clock tree initialization.

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2018-07-20 15:55:07 -04:00
Patrick Delaunay
5b25eb9f22 stm32mp1: clk: add ADC clock gating
Add ADC clock gating, that may be used by STM32 ADC.

Signed-off-by: Fabrice Gasnier <fabrice.gasnier@st.com>
Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2018-07-20 15:55:07 -04:00
Patrick Delaunay
04365530c0 stm32mp1: clk: update Ethernet clock gating
Alignment with kernel clock driver

Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2018-07-20 15:55:07 -04:00
Patrick Delaunay
88fa34df9f stm32mp1: clk: add LDTC and DSI clock support
This patch add clk_enable/clk_disable/clk_get_rate support for
- DSI_PX
- LTDC_PX
- DSI_K (only get rate)

These clocks are needed for LTDC and DSI drivers with latest device tree.

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2018-07-20 15:55:07 -04:00
Patrick Delaunay
6110503f8f stm32mp1: clk: add common function pll_get_fvco
the function compute the VCO PLL freq, used in
- stm32mp1_read_pll_freq()
- pll_set_rate()

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
# Conflicts:
#	drivers/clk/clk_stm32mp1.c
2018-07-20 15:55:06 -04:00
Patrick Delaunay
c2fa5dc82d stm32mp1: clk: define RCC_PLLNCFGR2_SHIFT macro
This patch define RCC_PLLNCFGR2_SHIFT to reuse it in
the pll function for set rate.

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
Reviewed-by: Vikas Manocha <vikas.manocha@st.com>
2018-07-20 15:55:06 -04:00
Patrick Delaunay
d090cbab64 misc: stm32: Add STM32MP1 support
Following next kernel rcc bindings, we must use a MFD
RCC driver which is able to bind both clock and reset
drivers.

We can reuse and adapt RCC MFD driver already available
for MCU SoCs (F4/F7/H7).

Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2018-07-20 15:55:05 -04:00
Vipul Kumar
b4f015845a clk: zynqmp: Fixed the same if/else part error reported by coverity
This patch fixed the same if/else part error by adding the required
source select on the basis of is_pre_src check.

Signed-off-by: Vipul Kumar <vipul.kumar@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-07-19 10:49:53 +02:00
Manivannan Sadhasivam
ae485b540f clk: Add Actions Semi OWL clock support
This commit adds Actions Semi OWL family base clock and S900 SoC
specific clock support. For S900 peripheral clock support, only UART
clock has been added for now.

Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
2018-07-09 15:25:31 -04:00
Beniamino Galvani
c0fc1e215c clk: add Amlogic meson clock driver
Introduce a basic clock driver for Amlogic Meson SoCs which supports
enabling/disabling clock gates and getting their frequency.

Signed-off-by: Beniamino Galvani <b.galvani@gmail.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2018-06-19 07:31:47 -04:00
Marek Vasut
6995fc3aca clk: rmobile: Add R8A77995 RPC clock
Add missing RPC entry into the R8A77995 clock driver tables.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2018-06-14 13:36:33 +02:00
Marek Vasut
0f4ab201fa clk: rmobile: Add R8A77990 RPC clock
Add missing RPC entry into the R8A77990 clock driver tables.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2018-06-14 13:36:33 +02:00
Tom Rini
040b2583c3 Merge branch 'master' of git://git.denx.de/u-boot-sh 2018-06-02 16:58:27 -04:00
Álvaro Fernández Rojas
2902997b8b clk: bcm6345: convert to use live dt
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2018-06-01 15:56:02 +02:00
Marek Vasut
0d218efe2b clk: renesas: Add R8A77990 E3 clock tables
Add clock tables for R8A77990 E3 SoC .

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2018-06-01 09:47:01 +02:00
Marek Vasut
716d775286 clk: renesas: Add PE clock handling
The PE clock have two parents, add support for picking the correct
one and deriving the clock from it.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2018-06-01 09:42:13 +02:00
Marek Vasut
f0f1de75c9 clk: renesas: Add PLL1 and PLL3 dividers
Add and use the PLL1 and PLL3 dividers.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2018-06-01 09:42:13 +02:00
Marek Vasut
8376e0e6f7 clk: renesas: Pass clock rate around as 64bit number internally
The PLL rate could be in the GHz range, which could overflow a 32bit
data type. Since the hardware is 64bit anyway, pass the clock rates
as 64bit number internally to avoid this.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2018-06-01 09:42:13 +02:00
Marek Vasut
15e0918285 clk: renesas: Fix swapped arguments in debug message
The mul and div arguments were reported in reverse order in the debug
message, swap them to fix this.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2018-06-01 09:42:13 +02:00
Eugen Hristev
649aa6cfe8 clk: at91: clk-h32mx: replace dm_warn with dev_dbg
dm_warn is too noisy, replace with dev_dbg for less noise.

Based on original work by Wenyou Yang

Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
2018-05-23 17:30:03 -04:00
Jonathan Gray
ed1030e152 rockchip: clk: rk3288: handle clk_enable requests for GMAC
Since b0ba1e7e9d
(rockchip: clk: rk3288: add clk_enable function and support USB HOST0/HSIC)
Ethernet no longer probes on RK3288.

Add no-ops for GMAC clocks observed to be requested which match the
clk_enable cases in RK3368 and RK3399.

Signed-off-by: Jonathan Gray <jsg@jsg.id.au>
Cc: Wadim Egorov <w.egorov@phytec.de>
Cc: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2018-05-14 17:30:40 +02:00
Marek Behún
dd77690c43 clk: armada-37xx: Support soc_clk_dump
Add support for the clk dump command on Armada 37xx.

Signed-off-by: Marek Behun <marek.behun@nic.cz>
Reviewed-by: Stefan Roese <sr@denx.de>
Signed-off-by: Stefan Roese <sr@denx.de>
2018-05-14 10:00:15 +02:00
Marek Behún
82a248df9a driver: clk: Add support for clocks on Armada 37xx
The drivers are based on Linux driver by Gregory Clement.

The TBG clocks support only the .get_rate method.
  - since setting rate is not supported, the driver computes the rates
    when probing and so subsequent calls to the .get_rate method do not
    read the corresponding registers again

The peripheral clocks support methods .get_rate, .enable and .disable.

  - the .set_parent method theoretically could be supported on some clocks
    (the parent would have to be one of the TBG clocks)

  - the .set_rate method would have to try all the divider values to find
    the best approximation of a given rate, and it doesn't seem like
    this should be needed in U-Boot, therefore not implemented

Signed-off-by: Marek Behun <marek.behun@nic.cz>
Reviewed-by: Stefan Roese <sr@denx.de>
Signed-off-by: Stefan Roese <sr@denx.de>
2018-05-14 10:00:15 +02:00
Mario Six
f0bcbe6c18 clk: Add ICS8N3QV01 driver
Add a driver for the ICS8N3QV01 Quad-Frequency Programmable VCXO.

Signed-off-by: Mario Six <mario.six@gdsys.cc>
2018-05-08 18:50:23 -04:00
Fabrice Gasnier
f198bbac66 clk: stm32mp1: Add VREF clock gating
Add VREF clock gating, that may be used by STM32 VREFBUF regulator.

Signed-off-by: Fabrice Gasnier <fabrice.gasnier@st.com>
Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2018-05-08 09:07:39 -04:00
Patrice Chotard
8b41464547 clk: clk_stm32f: Use PLLSAIP as USB 48MHz clock
On all STM32F4 and F7 SoCs  family (except STM32F429), PLLSAI
output P can be used as 48MHz clock source for USB and SDMMC.

Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
Tested By: Bruno Herrera <bruherrera@gmail.com>
2018-05-08 09:07:34 -04:00
Tom Rini
4549e789c1 SPDX: Convert all of our multiple license tags to Linux Kernel style
When U-Boot started using SPDX tags we were among the early adopters and
there weren't a lot of other examples to borrow from.  So we picked the
area of the file that usually had a full license text and replaced it
with an appropriate SPDX-License-Identifier: entry.  Since then, the
Linux Kernel has adopted SPDX tags and they place it as the very first
line in a file (except where shebangs are used, then it's second line)
and with slightly different comment styles than us.

In part due to community overlap, in part due to better tag visibility
and in part for other minor reasons, switch over to that style.

This commit changes all instances where we have multiple licenses (in
these cases, dual license) declared in the SPDX-License-Identifier tag.
In this case we change from listing "LICENSE-A LICENSE-B" or "LICENSE-A
or LICENSE-B" or "(LICENSE-A OR LICENSE-B)" to "LICENSE-A OR LICENSE-B"
as per the Linux Kernel style document.  Note that parenthesis are
allowed so when they were used before we continue to use them.

Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
2018-05-07 10:24:31 -04:00
Tom Rini
83d290c56f SPDX: Convert all of our single license tags to Linux Kernel style
When U-Boot started using SPDX tags we were among the early adopters and
there weren't a lot of other examples to borrow from.  So we picked the
area of the file that usually had a full license text and replaced it
with an appropriate SPDX-License-Identifier: entry.  Since then, the
Linux Kernel has adopted SPDX tags and they place it as the very first
line in a file (except where shebangs are used, then it's second line)
and with slightly different comment styles than us.

In part due to community overlap, in part due to better tag visibility
and in part for other minor reasons, switch over to that style.

This commit changes all instances where we have a single declared
license in the tag as both the before and after are identical in tag
contents.  There's also a few places where I found we did not have a tag
and have introduced one.

Signed-off-by: Tom Rini <trini@konsulko.com>
2018-05-07 09:34:12 -04:00
Marek Vasut
424060dae4 clk: renesas: Drop USB extal from the R8A7792 clock driver
The R8A7792 does not have the USB extal, so drop it.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2018-05-02 10:49:58 +02:00
Tom Rini
d024236e5a Remove unnecessary instances of DECLARE_GLOBAL_DATA_PTR
We have a large number of places where while we historically referenced
gd in the code we no longer do, as well as cases where the code added
that line "just in case" during development and never dropped it.

Signed-off-by: Tom Rini <trini@konsulko.com>
2018-04-27 14:54:48 -04:00
Kever Yang
c877ef3ac1 rockchip: rv1108: add ofdata_to_platdata() method for driver
Parse of data in dedicated api instead of in probe().

The clk_set_rate() may be called before the clk driver is probed,
after core support set default clock.
This patch fix system abort issue since:
f4fcba5 clk: implement clk_set_defaults()

Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-sytems.com>
Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-sytems.com>
2018-04-25 22:20:07 +02:00
Kever Yang
d2e938d993 rockchip: rk3128: add ofdata_to_platdata() method for driver
Parse of data in dedicated api instead of in probe().

The clk_set_rate() may be called before the clk driver is probed,
after core support set default clock.
This patch fix system abort issue since:
f4fcba5 clk: implement clk_set_defaults()

Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-sytems.com>
Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-sytems.com>
2018-04-25 22:20:06 +02:00