Add the --git parameter, else recent contributors are left out of the CC list.
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Currently the wget command is hard wired to HTTP port 80. This is
inconvenient, as it is extremely easy to start trivial HTTP server
as an unprivileged user using e.g. python http module to serve the
files, but such a server has to run on one of the higher ports:
"
$ python3 -m http.server -d $(pwd) 8080
"
Make it possible to configure HTTP server port the same way it is
possible to configure TFTP server port, using environment variable
'httpdstp' (similar to 'tftpdstp'). Retain port 80 as the default
fallback port. This way, users can start their own trivial server
and conveniently download whatever files they need into U-Boot.
Signed-off-by: Marek Vasut <marex@denx.de>
Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
The current DDR subsystem configuration occasionally results in write failures,
impacting memory stability, on Verdin AM62 Solo 512MB WB IT 0072 SKU.
This commit addresses the issue by adjusting Drive Pull-Up/Down and
Write Latency to improve the eye diagram and ensure reliable write operations.
This configuration is shared with all Verdin AM62 SoM and
it does not introduce regressions.
Configurations changes from previous / default values:
- Drive Pull-Up/Down from 40 to 34.3 Ohm
- Write Latency from 8 to 10
- ODTLon / ODTLoff latency from 0 / 0 to 4 / 20 nCK
- VREF control range 1 at 27 %
- tFAW from 30 to 40 ns
Configuration is output from SysConfig [1] web tool, currently at version
1.18.1+3343 (DDR SubSystem v9.10).
[1] https://dev.ti.com/sysconfig
Fixes: 7d1a10659f ("board: toradex: add verdin am62 support")
Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com>
Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
The contents of README.sha1 only refer to process around verification
of the pcs440ep board firmware in flash. The device was removed in
commit 242836a893 ("powerpc: ppc4xx: remove pcs440ep support") in
2015 so this readme isn't really relevant anymore so can be removed.
Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Sync Amlogic GXBB, GXL & GXM DTs from Linux v6.4, and also
switch to GXL MDIO MUX driver to adapt to DT change,
Most of the changes are only cosmetic or doesn't concern U-Boot,
the most important change for U-Boot is the GXL mdio mux compatible
switch to amlogic,gxl-mdio-mux.
Link: https://lore.kernel.org/r/20231213-u-boot-gxl-mdio-mux-v2-2-c56bb02a75ea@linaro.org
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Port the mdio-mux-meson-gxl.c Linux driver introduced in [1],
and adapt it to U-Boot.
This driver is needed to boot U-Boot with Linux DT since v6.4,
since it switched the MDIO mux from the mmio to a proper GXL driver.
[1] 9a24e1ff4326 ("net: mdio: add amlogic gxl mdio mux support")
Link: https://lore.kernel.org/r/20231213-u-boot-gxl-mdio-mux-v2-1-c56bb02a75ea@linaro.org
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Turn display connector power off on boot and reboot to prevent any
bogus start up sequence of any panel potentially attached to the
display connector.
Signed-off-by: Marek Vasut <marex@denx.de>
Migrate to the new environment format and drop most of the config.h.
Signed-off-by: Yong-Xuan Wang <yongxuan.wang@sifive.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Add timer driver in Starfive SoC. It is an timer that outside
of CPU core and inside Starfive SoC.
Signed-off-by: Kuan Lim Lee <kuanlim.lee@starfivetech.com>
Signed-off-by: Wei Liang Lim <weiliang.lim@starfivetech.com>
Changes for v2:
- correct driver name, comment, variable
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
MicroBlaze V is new AMD/Xilinx soft-core 32bit RISC-V processor IP.
It is hardware compatible with classic MicroBlaze processor.
The patch contains initial wiring and configuration for initial HW design
with memory, cpu, interrupt controller, timers and uartlite console
(interrupt controller is listed but U-Boot is not using it).
Provided DT is just describing one configuration and should be taken only
as example.
Signed-off-by: Michal Simek <michal.simek@amd.com>
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
Reviewed-by: Padmarao Begari <padmarao.begari@microchip.com>
Add gpio-restart node to do reset.
Before applied this patch, System Reset Extension doesn't appear with
sbi command.
OpenSBI 1.3
Machine:
Vendor ID 489
Architecture ID 8000000000000007
Implementation ID 4210427
Extensions:
sbi_set_timer
sbi_console_putchar
...[snip]...
IPI Extension
RFENCE Extension
Hart State Management Extension
Performance Monitoring Unit Extension
After applied this patch, System Reset Extension is supported from SBI.
OpenSBI 1.3
Machine:
Vendor ID 489
Architecture ID 8000000000000007
Implementation ID 4210427
Extensions:
sbi_set_timer
sbi_console_putchar
...[snip]...
IPI Extension
RFENCE Extension
Hart State Management Extension
System Reset Extension
Performance Monitoring Unit Extension
Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
Documentation:
* replace MD5 and SHA1 by SHA256 in examples
UEFI:
* Refactor boot manager and bootefi command to let the EFI boot method work
without shell.
-----BEGIN PGP SIGNATURE-----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=hvkt
-----END PGP SIGNATURE-----
Merge tag 'efi-next-20231217' of https://source.denx.de/u-boot/custodians/u-boot-efi into next
Pull request for efi-next-20231217
Documentation:
* replace MD5 and SHA1 by SHA256 in examples
UEFI:
* Refactor boot manager and bootefi command to let the EFI boot method work
without shell.
Both SHA1 and (especially) MD5 are no longer as safe as they once were for
cryptographic use. Replaces examples which use them with examples using
SHA256 instead. This will provide more-secure defaults for users who use
documentation examples as a base for their own use. This is not too
necessary for non-verified-boot scenarios (since someone could just replace
the checksum), but I wanted to be complete.
Signed-off-by: Sean Anderson <seanga2@gmail.com>
Reviewed-by: Peter Robinson <pbrobinson@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
Now that efi_loader subsystem provides interfaces that are equivalent
with bootefi command, we can replace command invocations with APIs.
Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Now it is clear that the command actually depends on interfaces,
not "bootefi bootmgr" command.
Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
In the prior commits, interfaces for executing EFI binary and boot manager
were carved out. Move them under efi_loader directory so that they can
be called from other places without depending on bootefi command.
Only efi_selftest-related code will be left in bootefi.c.
Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Device paths allocated in bootefi_test_prepare() will be immediately
consumed by do_efi_selftest() and there is no need to keep them for later
use. Introduce test-specific varialbles to make it easier to move other
bootmgr functions into library directory in the next commit.
Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Carve binary execution code out of do_bootefi_image() in order to move
binary-execution specific code into library directory in the later
commit.
Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Carve EFI boot manager related code out of do_bootefi_image() in order
to move boot manager specific code into library directory in the later
commit.
Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Replicate some code and re-organize do_bootefi() into three cases, which
will be carved out as independent functions in the next two commits.
Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Unfold do_bootefi_image() into do_bootefi() in order to make it easier
to re-organize do_bootefi() in the next commit.
Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Import DRAM timings generated by the DDR tool 3.31 which introduce assorted
tweaks to the DRAM controller settings. Furthermore, enable DBI to improve
noise resilience of the DRAM bus by reducing the number of bit changes on
the bus.
Reduce the DRAM rate to 3600 MTps to remove all remaining correctable errors
reported by EDAC . It is not entirely clear why the slightly faster setting
does produce sporadic correctable errors, while this one does not, but this
could be related to simpler PLL setting at 3600 MTps.
Enable inline ECC which is necessary to detect ECC errors and collect
statistics by the EDAC driver in Linux. This reduces the DRAM size by
64 MiB for each 512 MiB of DRAM, so for a 4 GiB device the available
DRAM size becomes 3.5 GiB and for 2 GiB device the available DRAM size
becomes 1.8 GiB.
Signed-off-by: Marek Vasut <marex@denx.de>
In case the Buck5 and Buck6 regulators which supply DRAM Vdd1 and Vdd2/Vddq
respectively operate in automatic PWM/PFM mode, the DRAM EDAC detects more
correctable errors than if the regulators operate in forced PWM only mode.
Force DRAM regulators to forced PWM mode only to stop tempting the DRAM.
Signed-off-by: Marek Vasut <marex@denx.de>
After talking with the author off-list I was reminded that this part of
the series was not supposed to be merged, only parts 1-3 upon further
review.
This reverts commit 58a277c207.
Signed-off-by: Tom Rini <trini@konsulko.com>
The main thing in here is Igor's conversion of soc_clk_dump to a clk_ops
member. There's also a write-protect feature for nuvoton clocks.
Signed-off-by: Sean Anderson <seanga2@gmail.com>
-----BEGIN PGP SIGNATURE-----
iQGTBAABCgB9FiEEkGEdW86NSNID6GAoPuiP7LShEG4FAmV8uvhfFIAAAAAALgAo
aXNzdWVyLWZwckBub3RhdGlvbnMub3BlbnBncC5maWZ0aGhvcnNlbWFuLm5ldDkw
NjExRDVCQ0U4RDQ4RDIwM0U4NjAyODNFRTg4RkVDQjRBMTEwNkUACgkQPuiP7LSh
EG5TtQf+N5BIVCRDFgFT7rM1lGYVtJEOm+oj58zQfM4MUAp2LKCHbHv7c8ZMUmdu
SJPJiDW4I2xQqAaawxcSub4L5d0G22SopotIVOcQXXTFFeW8rdpcRjhPhyIuHN8w
6dOo8T9U+BMjoNgtY48nNAhkzDGUDVJRZ/uBt8F1U6hKjk5OisSFyBfPZMtuvr/D
EBG8QqzXOMujrm9HGSVipvnSbgGX+QqtST4mVoatvQJ3DWYXxq8O5BPJFer1DL3F
BcI9yNaOG/L6MXAA3wkjh3nYLXoiRUgo2DRag++XMHnXYQ/xFzekraNAFHGDQslQ
Gnjz+5xp/z4ywOEkHSuI3mZIICBJ1Q==
=z+Sl
-----END PGP SIGNATURE-----
Merge tag 'clk-2024.01-next' of https://source.denx.de/u-boot/custodians/u-boot-clk into next
clock patches for u-boot/next
The main thing in here is Igor's conversion of soc_clk_dump to a clk_ops
member. There's also a write-protect feature for nuvoton clocks.
Signed-off-by: Sean Anderson <seanga2@gmail.com>
This has some clock fixes which should go in before the release. It's a bit
late in the cycle, but most of these have tests to go along with them.
Signed-off-by: Sean Anderson <seanga2@gmail.com>
-----BEGIN PGP SIGNATURE-----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=9PNJ
-----END PGP SIGNATURE-----
Merge tag 'clk-2024.01-rc5' of https://source.denx.de/u-boot/custodians/u-boot-clk
clock changes for u-boot/master
This has some clock fixes which should go in before the release. It's a bit
late in the cycle, but most of these have tests to go along with them.
Signed-off-by: Sean Anderson <seanga2@gmail.com>
The base address of extended DDR does not change across the K3 family.
Setting this per SoC is not needed. Remove this definition to help
remove the last bits from K3 include/configs/*.h files.
Signed-off-by: Andrew Davis <afd@ti.com>
Updates as a result of TIFS core now reserving a virtual interrupt
for enabling interrupts between DM to TIFS core. Because of this
change other virtual interrupt counts decrease by one.
Signed-off-by: Vishal Mahaveer <vishalm@ti.com>
Share the MCU GPIO interrupts between A53 core and DM R5 core. Allocating
2 instances each to A53 and DM R5.
Signed-off-by: Vishal Mahaveer <vishalm@ti.com>
Update am62ax rm-cfg with allocation entries for C7x core. Following
updates are added for C7x:
- Share split BCDMA tx and rx channels between DM R5 and C7x
- Share rings for split BCDMA tx and rx channels between DM R5 and C7x
- Add Global events and Virtual interrupts for C7x
Signed-off-by: Vishal Mahaveer <vishalm@ti.com>
The Device vs Normal memory map is the same for all K3 SoCs. Merge
the SoC specific maps into one.
Signed-off-by: Andrew Davis <afd@ti.com>
Reviewed-by: Nishanth Menon <nm@ti.com>
Tested-by: Nishanth Menon <nm@ti.com>
All normal memory areas should be mapped as such.
We added these un-cached holes in our memory map to hack around the
remoteproc driver missing the proper cache maintenance operations.
The problem is having these non-cached memory map areas causes stability
issues later in system operation due to the nature of the K3 coherency
architecture. Plus these are board specific carveouts and instead
should have been added at the board level, not here in the SoC common
code area.
Remove these non-cached memory map areas.
Signed-off-by: Andrew Davis <afd@ti.com>
Reviewed-by: Nishanth Menon <nm@ti.com>
Tested-by: Nishanth Menon <nm@ti.com>
ATF and OPTEE regions may be firewalled from non-secure entities. To
prevent access to this area we leave a hole there in the MMU map. This
is the same idea as [0] but we complete that patch by adding the same
for AM65, J721e, J7200, and J721s2 here.
[0] commit 0688ff3ae2 ("arm: mach-k3: arm64-mmu: do not map ATF and OPTEE regions in A53 MMU")
Signed-off-by: Andrew Davis <afd@ti.com>
NR_MMU_REGIONS is a copy/paste from another platform that extends
this list later. We do not do that, so let the list be the size
of the initializer list.
Signed-off-by: Andrew Davis <afd@ti.com>
Reviewed-by: Nishanth Menon <nm@ti.com>
Tested-by: Nishanth Menon <nm@ti.com>
This file is common for all K3, move it out of board/ directory and
into mach-k3. As we need to change the path in k3-binman.dtsi let's
take this opportunity to switch to absolute paths which makes adding
non-TI boards (like Toradex Verdin) not need to override these paths.
Signed-off-by: Andrew Davis <afd@ti.com>
Assign ccf_clk_ops to .ops of clk_ccf driver so that it can act as an
clk provider. Also add "#clock-cells=<1>" to its device tree node.
Add "i2c_root" to clk_test in the device tree and driver for testing.
Get "i2c_root" clock in CCF unit tests and add tests for it.
Signed-off-by: Yang Xiwen <forbidden405@outlook.com>
Reviewed-by: Sean Anderson <seanga2@gmail.com>
Link: https://lore.kernel.org/r/20231111-enable_count-v3-2-08a821892fa9@outlook.com
Add a flag to set ahb/apb/fiu/spi clock divider as read-only
The spi clock setting is related to booting flash, it is setup by early
bootloader.
It just protects the clock source and can't modify it in uboot.
Signed-off-by: Jim Liu <JJLIU0@nuvoton.com>
Reviewed-by: Sean Anderson <seanga2@gmail.com>
Link: https://lore.kernel.org/r/20231114090004.3746024-1-JJLIU0@nuvoton.com
After introducing dump to clk_ops there is no need to override or expose
this symbol anymore.
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
Tested-by: Patrice Chotard <patrice.chotard@foss.st.com>
Reviewed-by: Sean Anderson <seanga2@gmail.com>
Signed-off-by: Igor Prusov <ivprusov@sberdevices.ru>
Link: https://lore.kernel.org/r/20231109105516.24892-9-ivprusov@sberdevices.ru
Switch to using new dump operation in clock provider drivers instead of
overriding soc_clk_dump.
Tested-by: Patrice Chotard <patrice.chotard@foss.st.com>
Reviewed-by: Sean Anderson <seanga2@gmail.com>
Signed-off-by: Igor Prusov <ivprusov@sberdevices.ru>
Link: https://lore.kernel.org/r/20231109105516.24892-8-ivprusov@sberdevices.ru
Add another loop to dump additional info from clock providers that
implement dump operation.
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
Tested-by: Patrice Chotard <patrice.chotard@foss.st.com>
Reviewed-by: Sean Anderson <seanga2@gmail.com>
Signed-off-by: Igor Prusov <ivprusov@sberdevices.ru>
Link: https://lore.kernel.org/r/20231109105516.24892-7-ivprusov@sberdevices.ru
