Commit graph

179 commits

Author SHA1 Message Date
Philip Oberfichtner
55d1537c5b bosch: Add initial board support for ACC
The Bosch ACC (Air Center Control) Board is based on the i.MX6D.

The device tree is copied from Linux, see [1]. The only difference
compared to the Linux DT is the removal of usbphynop properties. They are
defined in the Linux version of imx6qdl.dtsi, but not in the u-boot
version.

[1] Commit 6192cf8ac082 from
    git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux.git

Signed-off-by: Philip Oberfichtner <pro@denx.de>
2022-05-20 12:36:48 +02:00
Ye Li
cda8f87349 caam: Fix crash in case caam_jr_probe failed
If probing caam_jr returns failure, the variable "dev" will not be
initialized, so we can't use dev->name for the error print.
Otherwise it will cause crash.

Signed-off-by: Ye Li <ye.li@nxp.com>
Reviewed-by: Gaurav Jain <gaurav.jain@nxp.com>
2022-05-20 12:36:47 +02:00
Tim Harvey
61cf225053 board: gateworks: gw_ventana: use comomn GSC driver
Use the common GSC driver.

This allows us to do some additional cleanup:
 - use the GSC driver functions
 - move waiting for the EEPROM to the SPL int (it will always be ready
   after this)
 - move eeprom functions into eeprom file and elimate GSC_I2C_BUS
 - eliminate some redundant EEPROM reads (the EEPROM must be read in
   SPL before relocation, in SPL after relocation, and in U-Boot init.
   All subsequent uses can use the global structure)
 - remove unnecessary header files and alphabatize includes

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2022-04-21 12:44:24 +02:00
Francesco Dolcini
aa42894471 mx6: ddr: Wait before issuing the first MRS cmd
Wait 1ms before issuing the first MRS command to write DDR3 Mode
registers.

There is a requirement to wait a minimum time before issuing command to
the DDR3 device, according to the JEDEC standard this time is 500us
(after RESET_n is de-asserted until CKE becomes active) + tXPR (Reset
CKE Exit time, maximum value 360ns).

It seems that for some reason this is not enforced by the MMDC
controller.

Without this change we experienced random memory initialization failures
with about 2% boot failure rate on specific problematic boards, after
this change we were able to do more than 10.000 power-cycle without a
single failure.

Fixes: fe0f7f7842 ("mx6: add mmdc configuration for MX6Q/MX6DL")
Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Reviewed-by: Marek Vasut <marex@denx.de>
Reviewed-by: Fabio Estevam <festevam@denx.de>
2022-04-12 19:10:43 +02:00
Francesco Dolcini
09dbac8174 mx6: ddr: Restore ralat/walat in write level calibration
The current DDR write level calibration routine always overwrite
the ralat/walat fields to their maximum value, just save
the existing values at the beginning of the calibration routine
and restore it at the end.

In case the delay is estimated by the user to be more than one cycle the
walat should be configured according to that, this is not
automatically done.  From the i.MX6 RM:

   The user should read the results of the associated delay-line at
   MPWLDECTRL#[WL_DL_ABS_OFFSET#] and in case the user estimates that the
   reasonable delay may be above 1 cycle then the user should indicate it at
   MPWLDECTRL#[WL_CYC_DEL#]. Moreover the user should indicate it in
   MDMISC[WALAT] field. For example, if the result of the write leveling calibration
   is 100/256 parts of a cycle, but the user estimates that the delay is above 2 cycles
   then MPWLDECTRL#[WL_CYC_DEL#] should be configured to 2, so the total
   delay will be 2 and 100/256 parts of a cycle

Probably it would just possible to not overwrite the mdmisc register in
the first place, since this is not present in the write_level_calib() example
in NXP AN4467 nor in the i.MX6 RM (44.11.6.1 Hardware Write Leveling
Calibration).

Fixes: d339f16911 ("arm: imx6: Add DDR3 calibration code for MX6 Q/D/DL")
Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Reviewed-by: Marek Vasut <marex@denx.de>
Reviewed-by: Fabio Estevam <festevam@denx.de>
2022-04-12 19:10:43 +02:00
Gaurav Jain
644bfa8e1d i.MX6: Enable Job ring driver model.
i.MX6,i.MX6SX,i.MX6UL - added support for JR driver model.

removed sec_init() call, sec is initialized based on
job ring information processed from device tree.

Signed-off-by: Gaurav Jain <gaurav.jain@nxp.com>
Reviewed-by: Ye Li <ye.li@nxp.com>
2022-04-12 11:18:34 +02:00
Dario Binacchi
c1af358cf5 imx: mx6ull: fix REFTOP_VBGADJ setting
The previous code wrote the contents of the fuse as is in the
REFTOP_VBGADJ[2:0], but this was wrong if you consider the contents of
the table in the code comment. This table is also different from the
table in the commit description. But then, which of the two is correct?
If it is assumed that an unprogrammed fuse has a value of 0 then for
backward compatibility of the code REFTOP_VBGADJ[2:0] must be set to
6 (b'110). Therefore, the table in the code comment can be considered
correct as well as this patch.

Fixes: 97c16dc8bf ("imx: mx6ull: update the REFTOP_VBGADJ setting")
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
2022-02-05 15:49:02 +01:00
Sven Schwermer
0be742d06d imx: Enable ACTLR.SMP in SPL for i.MX6/7
Similar to what has been done before with c5437e5b for u-boot proper, we
enable the SMP bit for SPL as well. This is necessary when SDP booting
straight into Linux, i.e. falcon boot. When SDP boot mode is active, the
ROM code does not set this bit which makes the caches not work once
activated in Linux.

On an i.MX6ULL (528MHz), this reduces a minimal kernel's boot time into
an initramfs shell from ~6.1s down to ~1.2s.

Signed-off-by: Sven Schwermer <sven@svenschwermer.de>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
2022-02-05 13:38:39 +01:00
Harald Seiler
12f9b4d086 mx6: Use imx6_src_get_boot_mode() to check boot device
Use imx6_src_get_boot_mode() instead of manually reading SBMR1.  The
existing function has proper handling for software overrides of the
bootdevice which can happen, for example, when booting from an alternate
source using `bmode`.

Signed-off-by: Harald Seiler <hws@denx.de>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
2022-02-05 13:38:39 +01:00
Fabio Estevam
7ad0cee754 udoo: Select CMD_DM
CMD_DM is useful for showing the whole DM tree.

Enable it via "imply CMD_DM".

Signed-off-by: Fabio Estevam <festevam@gmail.com>
Reviewed-by: Peter Robinson <pbrobinson@gmail.com>
2022-01-08 11:16:03 -05:00
Matthias Schiffer
a5e305256b board: tq: fix spelling of "TQ-Systems"
"TQ-Systems" is written with a dash.

Signed-off-by: Matthias Schiffer <matthias.schiffer@ew.tq-group.com>
2021-11-15 14:33:32 -05:00
Matthias Schiffer
679530c3c6 board: rename "tqc" vendor to "tq"
The subdivision name "TQ Components" hasn't been in use for a long time.
Rename the vendor directory to "tq", which also matches our Device Tree
vendor prefix.

Signed-off-by: Matthias Schiffer <matthias.schiffer@ew.tq-group.com>
2021-11-15 14:33:32 -05:00
Frieder Schrempf
e6f48aad15 imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx)
This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by
Kontron Electronics GmbH.

Currently there are the following SoM flavors (SoM-Line):
  * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND
  * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND
  * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND

And the according evaluation boards (Board-Line):
  * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ...
  * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ...
  * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ...

Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config
options at compile-time. Though the differences are so minor, that for
the scope of these SoMs we just use a single defconfig that is compatible
with both SoCs.

Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
Reviewed-by: Stefano Babic <sbabic@denx.de>
2021-10-07 16:53:50 +02:00
Tom Rini
6674edaabf Prepare v2021.10-rc4
-----BEGIN PGP SIGNATURE-----
 
 iQGzBAABCgAdFiEEGjx/cOCPqxcHgJu/FHw5/5Y0tywFAmFBKRgACgkQFHw5/5Y0
 tyw/PwwAtGB3rBeYW4rjWuMC5WP1UDTnvZIAok5ImWumWDahjDm8Yq2VCzAe9adw
 EYBjuNmaNl9aQvGVqlVJeIcLku5MLuLQu2za8vhc1R8X9VTPPY+LLTcdOokOmB8y
 8JiaE7fJsb1bZeV+diF9tss3B0IkUrwSJtW1d+qfdz/4UiRvwK5BhnZgzIobDldO
 g1Ldz/xiR2GOAXlUMwDrNAi6qNvmeAqRsQxySVrjltAV2ST7LJnOiHuWvJX6g6VS
 l796Hleh/kULfEW6n+1ZaTNqvVRcJ8xYSOG8w8y9u6HuPBA3JrYH1p1Eo5n7PPDv
 US71Iy/ncweTyfTMEBThWLqjHOQ05sVkWX/r4fj2iJRli+Og53lE1fVJ4ajIx7vz
 Tc76wI43i0I5lr2yTErjUG6EzDDoueqd+c8BwxihNLUK/+QG31xoCEMfC80C25ro
 QhYVFgiPWN0ySUD5M5tbGXODvfNNIDKXpY5oSOTVtemZtDEMpO2zBM1s/K3RV7Ud
 Je9Pj0Cu
 =Me42
 -----END PGP SIGNATURE-----

Merge tag 'v2021.10-rc4' into next

Prepare v2021.10-rc4

Signed-off-by: Tom Rini <trini@konsulko.com>

# gpg: Signature made Tue 14 Sep 2021 06:58:32 PM EDT
# gpg:                using RSA key 1A3C7F70E08FAB1707809BBF147C39FF9634B72C
# gpg: Good signature from "Thomas Rini <trini@konsulko.com>" [ultimate]

# Conflicts:
#	board/Arcturus/ucp1020/spl.c
#	cmd/mvebu/Kconfig
#	common/Kconfig.boot
#	common/image-fit.c
#	configs/UCP1020_defconfig
#	configs/sifive_unmatched_defconfig
#	drivers/pci/Kconfig
#	include/configs/UCP1020.h
#	include/configs/sifive-unmatched.h
#	lib/Makefile
#	scripts/config_whitelist.txt
2021-09-16 10:29:40 -04:00
Simon Glass
3232bdf0b3 pci: Drop DM_PCI
This option has not effect now. Drop it, using PCI instead where needed.

Signed-off-by: Simon Glass <sjg@chromium.org>
2021-09-13 18:23:13 -04:00
Simon Glass
2a73606668 serial: Rename SERIAL_SUPPORT to SERIAL
Rename these options so that CONFIG_IS_ENABLED can be used with them.

Signed-off-by: Simon Glass <sjg@chromium.org>
2021-09-04 12:26:01 -04:00
Simon Glass
103c5f1806 mmc: Rename MMC_SUPPORT to MMC
Rename these options so that CONFIG_IS_ENABLED can be used with them.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
[trini: Fixup some incorrect renames]
Signed-off-by: Tom Rini <trini@konsulko.com>
2021-09-04 11:42:41 -04:00
Michal Simek
b4c2c151b1 Kconfig: Remove all default n/no options
default n/no doesn't need to be specified. It is default option anyway.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
[trini: Rework FSP_USE_UPD portion]
Signed-off-by: Tom Rini <trini@konsulko.com>
2021-08-31 17:47:49 -04:00
Simon Glass
7e5f460ec4 global: Convert simple_strtoul() with hex to hextoul()
It is a pain to have to specify the value 16 in each call. Add a new
hextoul() function and update the code to use it.

Add a proper comment to simple_strtoul() while we are here.

Signed-off-by: Simon Glass <sjg@chromium.org>
2021-08-02 13:32:14 -04:00
Simon Glass
83061dbd1c Rename GPIO_SUPPORT to GPIO
Rename these options so that CONFIG_IS_ENABLED can be used with them.

Signed-off-by: Simon Glass <sjg@chromium.org>
2021-07-28 14:29:36 -04:00
Simon Glass
333e4a621d Rename SPL_USB_HOST_SUPPORT to SPL_USB_HOST
Rename this option so that CONFIG_IS_ENABLED can be used with it.

Signed-off-by: Simon Glass <sjg@chromium.org>
2021-07-28 14:27:54 -04:00
Simon Glass
078111b9c0 Rename SPL_WATCHDOG_SUPPORT to SPL_WATCHDOG
Rename this option so that CONFIG_IS_ENABLED can be used with it.

Signed-off-by: Simon Glass <sjg@chromium.org>
2021-07-28 14:27:54 -04:00
Tom Rini
be5c0608b8 usb: Enforce DM_USB migration for USB_HOST devices.
As the deadline for migration to DM_USB, when using a USB host
controller has now gone two years past the deadline, enforce migration.
This is done by:

- Ensuring that all host controller options (other than the very legacy
  old MUSB ones) now select USB_HOST.  USB_HOST now enforces DM_USB and
  OF_CONTROL.
  - Remove other parts of Kconfig logic that had platforms pick DM_USB.
  - To keep Kconfig happy, have some select statements test for USB_HOST
    as well.
- Re-order some Kconfig entries and menus so that we can cleanly pick
  host or gadget roles.  For the various HCD options that have platform
  glue options, group them together and update dependencies in some
  cases.
- As SPL_DM_USB is not required, on platforms that had not yet enabled
  it, disable it.

Cc: Marek Vasut <marex@denx.de>
Cc: Icenowy Zheng <icenowy@aosc.io>
Cc: Samuel Holland <samuel@sholland.org>
Cc: FUKAUMI Naoki <naobsd@gmail.com>
Cc: Andre Przywara <andre.przywara@arm.com>
Cc: Jagan Teki <jagan@amarulasolutions.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
2021-07-18 21:05:31 -04:00
Navin Sankar Velliangiri
a3a0bc85c0 imx: Add SeeedStudio NPI-IMX6ULL Support
CPU:   Freescale i.MX6ULL rev1.1 792 MHz (running at 396 MHz)
CPU:   Industrial temperature grade (-40C to 105C) at 49C
Reset cause: POR
Model: Seeed NPi iMX6ULL Dev Board with NAND
Board: Seeed NPi i.MX6ULL Dev Board
DRAM:  512 MiB
NAND:  512 MiB
MMC:   FSL_SDHC: 0
In:    serial@2020000
Out:   serial@2020000
Err:   serial@2020000
Net:   FEC0

Working:
- Eth0
- MMC/SD
- NAND
- UART 1
- USB host

Signed-off-by: Navin Sankar Velliangiri <navin@linumiz.com>

Note:

Changes in v2:

 * removed unnecessary space in imx6ull-seeed-npi-imx6ull-dev-board.dts file.
 * Used SZ_2M for CONFIG_SYS_MALLOC_LEN size allocation.
2021-06-09 13:34:18 +02:00
Oleh Kravchenko
3675ac081a Add out4.ru O4-iMX-NANO board
Board designed for quick prototyping and has one microSD port,
2 Ethernet ports, 2 USB ports, I2C, SPI, CAN, RS-485, GPIO,
UART interfaces, and 2 RGB LEDs.

Signed-off-by: Oleh Kravchenko <oleg@kaa.org.ua>
Cc: Stefano Babic <sbabic@denx.de>
2021-06-09 13:32:42 +02:00
Tom Rini
4bbcec08eb arm: Remove mx6dlarm2 board
This board has not been converted to CONFIG_DM_MMC by the deadline.
Remove it.

Cc: Jason Liu <jason.hui.liu@nxp.com>
Cc: Ye Li <ye.li@nxp.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
2021-04-10 08:03:55 -04:00
Tom Rini
178d70b5b3 arm: Remove cgtqmx6eval board
This board has not been converted to CONFIG_DM_MMC by the deadline.
Remove it.

Cc: Otavio Salvador <otavio@ossystems.com.br>
Signed-off-by: Tom Rini <trini@konsulko.com>
2021-04-10 08:03:55 -04:00
Tom Rini
defd0dcfb9 arm: Remove titanium board
This board has not been converted to CONFIG_DM_MMC by the deadline.
Remove it.

Cc: Stefan Roese <sr@denx.de>
Signed-off-by: Tom Rini <trini@konsulko.com>
2021-04-10 08:03:55 -04:00
Tom Rini
397a43dc56 arm: Remove pfla02 board
This board has not been converted to CONFIG_DM_MMC by the deadline.
Remove it.

Cc: Stefano Babic <sbabic@denx.de>
Signed-off-by: Tom Rini <trini@konsulko.com>
2021-04-10 08:03:30 -04:00
Tom Rini
a0cacddcaf arm: Remove zc5202 and zc5601 boards
These boards have not been converted to CONFIG_DM_MMC by the deadline.
Remove them.

Cc: Stefano Babic <sbabic@denx.de>
Signed-off-by: Tom Rini <trini@konsulko.com>
2021-04-10 08:03:29 -04:00
Tom Rini
ddfc004009 arm: Remove xpress board
This board has not been converted to CONFIG_DM_MMC by the deadline.
Remove it.

Cc: Stefan Roese <sr@denx.de>
Signed-off-by: Tom Rini <trini@konsulko.com>
2021-04-10 08:02:03 -04:00
Tom Rini
96f599009a arm: Remove platinum_picon board
This board has not been converted to CONFIG_DM_MMC by the deadline.
Remove it.

Cc: Stefan Roese <sr@denx.de>
Signed-off-by: Tom Rini <trini@konsulko.com>
2021-04-10 08:01:10 -04:00
Tom Rini
56124508ce arm: Remove secomx6quq7 board
This board has not been converted to CONFIG_DM_MMC by the deadline.
Remove it.

Cc: Boris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
2021-04-10 08:00:45 -04:00
Tom Rini
c861d21cba arm: Remove ot1200 board
This board relies on using CONFIG_LIBATA but does not enable CONFIG_AHCI.  The
deadline for this conversion was the v2019.07 release.  In order to
convert to using the DWC SATA driver under DM further migrations are
required.

Cc: Christian Gmeiner <christian.gmeiner@gmail.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
Acked-by: Christian Gmeiner <christian.gmeiner@gmail.com>
2021-04-10 07:57:42 -04:00
Tom Rini
d8d3b77fc2 arm: Remove dms-ba16 board
This board relies on using CONFIG_LIBATA but does not enable CONFIG_AHCI.  The
deadline for this conversion was the v2019.07 release.  The use of CONFIG_AHCI
requires CONFIG_DM.  The deadline for this conversion was v2020.01.  Remove
this board.

Cc: Akshay Bhat <akshaybhat@timesys.com>
Cc: Ken Lin <Ken.Lin@advantech.com.tw>
Signed-off-by: Tom Rini <trini@konsulko.com>
2021-04-10 07:57:29 -04:00
Sean Anderson
1ce6e10c61 ARM: mx6: Add function to set serial#
The serial number OTP is similar to the imx7 version, except that the
register names are different. This also sets serial# directly, instead of
providing board_get_serial.

Signed-off-by: Sean Anderson <sean.anderson@seco.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
2021-03-01 10:21:36 +01:00
Tom Rini
93ef93b60b arm: Remove sksimx6 board
This board has not been converted to CONFIG_DM_MMC by the deadline.
Remove it.

Cc: Stefano Babic <sbabic@denx.de>
Signed-off-by: Tom Rini <trini@konsulko.com>
Acked-by: Stefano Babic <sbabic@denx.de>
2021-02-25 11:59:53 -05:00
Simon Glass
401d1c4f5d common: Drop asm/global_data.h from common header
Move this out of the common header and include it only where needed.  In
a number of cases this requires adding "struct udevice;" to avoid adding
another large header or in other cases replacing / adding missing header
files that had been pulled in, very indirectly.   Finally, we have a few
cases where we did not need to include <asm/global_data.h> at all, so
remove that include.

Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Tom Rini <trini@konsulko.com>
2021-02-02 15:33:42 -05:00
Tom Rini
b11f634b1c Driver model: make some udevice fields private
Driver model: Rename U_BOOT_DEVICE et al.
 dtoc: Tidy up and add more tests
 ns16550 code clean-up
 x86 and sandbox minor fixes for of-platdata
 dtoc prepration for adding build-time instantiation
 -----BEGIN PGP SIGNATURE-----
 
 iQFFBAABCgAvFiEEslwAIq+Gp8wWVbYnfxc6PpAIreYFAl/09LURHHNqZ0BjaHJv
 bWl1bS5vcmcACgkQfxc6PpAIrebjwwf/fHRjYsAY/Yj/+y1xgo3L3sphIvQUqTDF
 KkLl+kHdV5r8W/HJULxLQcF2r7pcPEI6TAQxuj3qQ5SUvm2HviS8GHGPawDEwyht
 HgBp9VD56+HUadMfnbG//DVS73ycbL4XSKlYqpkINEejtnlttsCIawUXX5cTyGM/
 59VkgnKrKvJQRUXvYLa8MTugTs4fkPJGDqhActBk/7SP1SImj+rfalNSqA2/dx6y
 2RnPCSzB1x2231KSj+B1NgGlR3Xb8P8zgh20ijcEU/hrlXBTZyi7K7f4SJR30Efu
 LYkkuj4VbxcV/25RozR0fmknqCs0QyAI+/dql6TNtbTSPC/jAfj0jQ==
 =9kN3
 -----END PGP SIGNATURE-----

Merge tag 'dm-pull-5jan21' of git://git.denx.de/u-boot-dm into next

Driver model: make some udevice fields private
Driver model: Rename U_BOOT_DEVICE et al.
dtoc: Tidy up and add more tests
ns16550 code clean-up
x86 and sandbox minor fixes for of-platdata
dtoc prepration for adding build-time instantiation
2021-01-05 22:34:43 -05:00
Tom Rini
720620e691 Prepare v2021.01-rc5
-----BEGIN PGP SIGNATURE-----
 
 iQGzBAABCgAdFiEEGjx/cOCPqxcHgJu/FHw5/5Y0tywFAl/0YVIACgkQFHw5/5Y0
 tywtEwv/cJWlKgcSnYjuJrxwuJdauUTfXdbUgtCxOtBw/BP4dsKkbGTJPw5q5M+4
 LJJSKyksmJVTX26h1dpkzQjOpWtTDnWqm5CTIxD52oQD7pxK+zCQ9T6S+QbQD0Se
 ogHmZluzFoluxbNgo8tiO52xvMhDO3TVAzxsNDdGfkd5/tAXOHClPc34RmAkdRHU
 VsR89AKdT2q543fiUfrRZYDzdctaNWhRGXMDcJ4+QU/8hQhrpcr8EtHbF+3mWX4K
 pA01pDz150Rn4UI6S2xKEWrjSTHe55fxVj/Qj0rq9z2E/+NqGXemf5s13AR0G/z3
 PqHdVLHzDe64pbOvmyU1pVQ0aMb8vMJUnqx68SQZY3On2c+MjRWQ+7aVVaKOcPGp
 uatk6QMrggHp3Li+3yZrLBE0qPr/sNMVb7mUesdZb6lFd2VIs8siwhfeGXMS+nDI
 xePzsR43Fnn5Q5KIqqvcWUb+TTTqUDUff0wyAU8NBgCaIBIZK8h2ppS1jjnbms0I
 mr8Er2vb
 =Dfum
 -----END PGP SIGNATURE-----

Merge tag 'v2021.01-rc5' into next

Prepare v2021.01-rc5

Signed-off-by: Tom Rini <trini@konsulko.com>
2021-01-05 16:20:26 -05:00
Simon Glass
20e442ab2d dm: Rename U_BOOT_DEVICE() to U_BOOT_DRVINFO()
The current macro is a misnomer since it does not declare a device
directly. Instead, it declares driver_info record which U-Boot uses at
runtime to create a device.

The distinction seems somewhat minor most of the time, but is becomes
quite confusing when we actually want to declare a device, with
of-platdata. We are left trying to distinguish between a device which
isn't actually device, and a device that is (perhaps an 'instance'?)

It seems better to rename this macro to describe what it actually is. The
macros is not widely used, since boards should use devicetree to declare
devices.

Rename it to U_BOOT_DRVINFO(), which indicates clearly that this is
declaring a new driver_info record, not a device.

Signed-off-by: Simon Glass <sjg@chromium.org>
2021-01-05 12:26:35 -07:00
Simon Glass
caa4daa2ae dm: treewide: Rename 'platdata' variables to just 'plat'
We use 'priv' for private data but often use 'platdata' for platform data.
We can't really use 'pdata' since that is ambiguous (it could mean private
or platform data).

Rename some of the latter variables to end with 'plat' for consistency.

Signed-off-by: Simon Glass <sjg@chromium.org>
2020-12-13 16:51:08 -07:00
Heiko Schocher
015c026f7a imx6: add support for aristainetos2c_cslb board variant
add support for aristainetos2c_cslb board variant.

Signed-off-by: Heiko Schocher <hs@denx.de>
2020-12-06 15:07:06 +01:00
Heiko Schocher
3cf02f5ffa imx6: remove not longer supported aristainetos boards
Removed aristainetos2, 2b, 2b-csl. This boards have been
recalled and destroyed.

Adapt board code to remove stuff not needed anymore.

Fix checkpatch warning, remove fdt_high and initrd_high
from default environment.

Signed-off-by: Heiko Schocher <hs@denx.de>
zu remove
2020-12-06 15:06:16 +01:00
Sebastian Reichel
64272efdaf board: ge: b1x5v2: Add GE B1x5v2 and B1x5Pv2
GE B1x5v2 patient monitor series is similar to the CARESCAPE Monitor
series (GE Bx50). It consists of a carrier PCB used in combination
with a Congatec QMX6 SoM. This adds U-Boot support using device model
everywhere and SPL for memory initialization.

Proper configuration is provided as 'ge_b1x5v2_defconfig' and the
combined image u-boot-with-spi.imx can be flashed directly to 1024
byte offset to /dev/mtdblock0. Alternatively SPL and u-boot.imx can
be loaded separately via USB-OTG using e.g. imx_usb.

Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
2020-11-01 16:01:40 +01:00
Sebastian Reichel
436ba4e0c7 imx6: allow usage of disable_ldb_di_clock_sources for CONFIG_MX6QDL
Allow using disable_ldb_di_clock_sources with just the combined
CONFIG_MX6QDL being enabled.

Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
2020-11-01 15:58:47 +01:00
Jorge Ramirez-Ortiz
74a039403c mx6: peripheral clock from oscillator
In order to be able to run the I2C bus at 400Khz, the chip errata[1]
recommends that the peripheral clock runs out of the 24MHz oscillator.

Systems running I2C from OP-TEE before Linux executes - for example to
access a Secure Element [2] providing the cryptographic support - expect
this clock to be configured by the bootloader [3].

[1] IMX6SLCE Rev. 5, 02/2019, ERR007805.
[2] OP-TEE: support for NXP SE05X Plug and Trust (patch on the list).
[3] OP-TEE: check the imx_i2c.c driver (imx6 patch on the list).

Signed-off-by: Jorge Ramirez-Ortiz <jorge@foundries.io>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
2020-11-01 15:52:47 +01:00
Simon Glass
4e28a259fd imx: mx6cuboxi: Disable thermal driver in SPL
This feature is incompatble with of-platdata since it uses the
U_BOOT_DEVICE() macro. With of-platdata the only devices permitted are
those created by dtoc.

The driver is not used in SPL anyway, so exclude it from that build.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
2020-10-29 14:42:56 -06:00
Marek Vasut
d1a7205532 ARM: mx6: ddr: Add support for iMX6UL/ULL/SL/SDL
This patch adds support for iMX6UL/ULL/SL/SDL MMDC into the DDR calibration
code. The difference between MX6DQ and MX6UL/ULL/SL is that the later SoCs
have 2 SDQS registers, just like MX6SX, while the MX6DQ/MX6SDL has 8.

Fixes: 4f4c128c65 ("ARM: mx6: ddr: Add support for iMX6SX")
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Eric Nelson <eric@nelint.com>
Cc: Fabio Estevam <fabio.estevam@nxp.com>
Cc: Stefano Babic <sbabic@denx.de>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
2020-09-17 14:40:55 +02:00
Tom Rini
f27ffe4177 arm: mx6: Make all i.MX6 SoCs user-selectable
We have a number of platforms that are a combination of a carrier board
and System-on-Module (SoM) that in turn allows for the board to have
different SoCs on it.  In some cases, this is handled via board-specific
Kconfig options.  In other cases we make use of
CONFIG_SYS_EXTRA_OPTIONS.  This latter case however can lead to invalid
configurations as we will not in turn get options that in Kconfig are
selected by or depend on that setting.

To resolve this, make the SoC option a choice in Kconfig and make boards
depend on what they can support.  This change opens us up for further
clean-ups in the cases where a single CONFIG_TARGET_xxx can support
different SoCs and today they do not, or do not cleanly do so.

Reported-by: Matt Porter <mporter@konsulko.com>
Cc: Stefano Babic <sbabic@denx.de>
Cc: Fabio Estevam <festevam@gmail.com>
Cc: "NXP i.MX U-Boot Team" <uboot-imx@nxp.com>
Cc: Soeren Moch <smoch@web.de>
Cc: Markus Niebel <Markus.Niebel@tq-group.com>
Cc: Igor Opaniuk <igor.opaniuk@toradex.com>
Cc: Heiko Schocher <hs@denx.de>
Cc: Hannes Schmelzer <hannes.schmelzer@br-automation.com>
Cc: Otavio Salvador <otavio@ossystems.com.br>
Cc: Nikita Kiryanov <nikita@compulab.co.il>
Cc: Andreas Geisreiter <ageisreiter@dh-electronics.de>
Cc: Ludwig Zenz <lzenz@dh-electronics.de>
Cc: Lukasz Majewski <lukma@denx.de>
Cc: Akshay Bhat <akshaybhat@timesys.com>
Cc: Ken Lin <Ken.Lin@advantech.com.tw>
Cc: Ian Ray <ian.ray@ge.com>
Cc: Tim Harvey <tharvey@gateworks.com>
Cc: Jagan Teki <jagan@amarulasolutions.com>
Cc: Raffaele RECALCATI <raffaele.recalcati@bticino.it>
Cc: Simone CIANNI <simone.cianni@bticino.it>
Cc: Adam Ford <aford173@gmail.com>
Cc: Marcin Niestroj <m.niestroj@grinn-global.com>
Cc: "Eric Bénard" <eric@eukrea.com>
Cc: Baruch Siach <baruch@tkos.co.il>
Cc: Jason Liu <jason.hui.liu@nxp.com>
Cc: Ye Li <ye.li@nxp.com>
Cc: Eric Nelson <eric@nelint.com>
Cc: Troy Kisky <troy.kisky@boundarydevices.com>
Cc: Peng Fan <peng.fan@nxp.com>
Cc: Parthiban Nallathambi <parthiban@linumiz.com>
Cc: Marek Vasut <marex@denx.de>
Cc: "Sébastien Szymanski" <sebastien.szymanski@armadeus.com>
Cc: Christian Gmeiner <christian.gmeiner@gmail.com>
Cc: Niel Fourie <lusus@denx.de>
Cc: Martyn Welch <martyn.welch@collabora.com>
Cc: Richard Hu <richard.hu@technexion.com>
Cc: Stefan Roese <sr@denx.de>
Cc: Boris Brezillon <bbrezillon@kernel.org>
Cc: Arkadiusz Karas <arkadiusz.karas@somlabs.com>
Cc: Breno Lima <breno.lima@nxp.com>
Cc: Francesco Montefoschi <francesco.montefoschi@udoo.org>
Cc: Silvio Fricke <open-source@softing.de>
Tested-by: Matt Porter <mporter@konsulko.com> [colibri_imx6]
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Marcin Niestroj <m.niestroj@grinn-global.com>
2020-08-25 10:26:14 +02:00